October 2024 - Linux-kselftest-mirror

[RFC PATCH v2 0/5] Add support for the Bus Lock Threshold

by Manali Shukla

Misbehaving guests can cause bus locks to degrade the performance of a system. Non-WB (write-back) and misaligned locked RMW (read-modify-write) instructions are referred to as "bus locks" and require system wide synchronization among all processors to guarantee the atomicity. The bus locks can impose notable performance penalties for all processors within the system. Support for the Bus Lock Threshold is indicated by CPUID Fn8000_000A_EDX[29] BusLockThreshold=1, the VMCB provides a Bus Lock Threshold enable bit and an unsigned 16-bit Bus Lock Threshold count. VMCB intercept bit VMCB Offset Bits Function 14h 5 Intercept bus lock operations Bus lock threshold count VMCB Offset Bits Function 120h 15:0 Bus lock counter During VMRUN, the bus lock threshold count is fetched and stored in an internal count register. Prior to executing a bus lock within the guest, the processor verifies the count in the bus lock register. If the count is greater than zero, the processor executes the bus lock, reducing the count. However, if the count is zero, the bus lock operation is not performed, and instead, a Bus Lock Threshold #VMEXIT is triggered to transfer control to the Virtual Machine Monitor (VMM). A Bus Lock Threshold #VMEXIT is reported to the VMM with VMEXIT code 0xA5h, VMEXIT_BUSLOCK. EXITINFO1 and EXITINFO2 are set to 0 on a VMEXIT_BUSLOCK. On a #VMEXIT, the processor writes the current value of the Bus Lock Threshold Counter to the VMCB. More details about the Bus Lock Threshold feature can be found in AMD APM [1]. v1 -> v2 - Incorporated misc review comments from Sean. - Removed bus_lock_counter module parameter. - Set the value of bus_lock_counter to zero by default and reload the value by 1 in bus lock exit handler. - Add documentation for the behavioral difference for KVM_EXIT_BUS_LOCK. - Improved selftest for buslock to work on SVM and VMX. - Rewrite the commit messages. Patches are prepared on kvm-next/next (0cdcc99eeaed) Testing done: - Added a selftest for the Bus Lock Threshold functionality. - The bus lock threshold selftest has been tested on both Intel and AMD platforms. - Tested the Bus Lock Threshold functionality on SEV and SEV-ES guests. - Tested the Bus Lock Threshold functionality on nested guests. v1: https://lore.kernel.org/kvm/20240709175145.9986-4-manali.shukla@amd.com/T/ [1]: AMD64 Architecture Programmer's Manual Pub. 24593, April 2024, Vol 2, 15.14.5 Bus Lock Threshold. https://bugzilla.kernel.org/attachment.cgi?id=306250 Manali Shukla (3): x86/cpu: Add virt tag in /proc/cpuinfo x86/cpufeatures: Add CPUID feature bit for the Bus Lock Threshold KVM: X86: Add documentation about behavioral difference for KVM_EXIT_BUS_LOCK Nikunj A Dadhania (2): KVM: SVM: Enable Bus lock threshold exit KVM: selftests: Add bus lock exit test Documentation/virt/kvm/api.rst | 5 + arch/x86/include/asm/cpufeature.h | 1 + arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/svm.h | 5 +- arch/x86/include/uapi/asm/svm.h | 2 + arch/x86/kernel/cpu/mkcapflags.sh | 3 + arch/x86/kernel/cpu/proc.c | 5 + arch/x86/kvm/svm/nested.c | 12 ++ arch/x86/kvm/svm/svm.c | 29 ++++ tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/x86_64/kvm_buslock_test.c | 130 ++++++++++++++++++ 11 files changed, 193 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/kvm/x86_64/kvm_buslock_test.c base-commit: 0cdcc99eeaedf2422c80d75760293fdbb476cec1 -- 2.34.1

1 year, 2 months

3
9
0 0

[PATCH v2] selftest: remoteproc: Add basic test for start/stop sequence

by Wasim Nazir

This test includes: 1) Start/stop test for each rproc instance sequencially 2) Start/stop test for all rproc instances concurrently Changes in v2: - Update commit message - Addressed start/stop flow Signed-off-by: Wasim Nazir <quic_wasimn(a)quicinc.com> diff --git a/MAINTAINERS b/MAINTAINERS index a77770cd96b8..02ebad5ae790 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19596,6 +19596,7 @@ F: Documentation/staging/remoteproc.rst F: drivers/remoteproc/ F: include/linux/remoteproc.h F: include/linux/remoteproc/ +F: tools/testing/selftests/remoteproc/ REMOTE PROCESSOR MESSAGING (RPMSG) SUBSYSTEM M: Bjorn Andersson <andersson(a)kernel.org> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index b38199965f99..0c8a0f427d01 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -82,6 +82,7 @@ TARGETS += proc TARGETS += pstore TARGETS += ptrace TARGETS += openat2 +TARGETS += remoteproc TARGETS += resctrl TARGETS += riscv TARGETS += rlimits diff --git a/tools/testing/selftests/remoteproc/Makefile b/tools/testing/selftests/remoteproc/Makefile new file mode 100644 index 000000000000..a84b3934fd36 --- /dev/null +++ b/tools/testing/selftests/remoteproc/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +TEST_PROGS := remoteproc_test.sh + +include ../lib.mk diff --git a/tools/testing/selftests/remoteproc/config b/tools/testing/selftests/remoteproc/config new file mode 100644 index 000000000000..a5c237d2f3b4 --- /dev/null +++ b/tools/testing/selftests/remoteproc/config @@ -0,0 +1 @@ +CONFIG_REMOTEPROC=y diff --git a/tools/testing/selftests/remoteproc/remoteproc_test.sh b/tools/testing/selftests/remoteproc/remoteproc_test.sh new file mode 100644 index 000000000000..589368285307 --- /dev/null +++ b/tools/testing/selftests/remoteproc/remoteproc_test.sh @@ -0,0 +1,134 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. +# + +DIR="$(dirname $(readlink -f "$0"))" + +KTAP_HELPERS="${DIR}/../kselftest/ktap_helpers.sh" +if [ -e "$KTAP_HELPERS" ]; then + . "$KTAP_HELPERS" +else + echo -n "1..0 # SKIP $KTAP_HELPERS file not found" + exit 4 +fi + +RPROC_SYS=/sys/class/remoteproc +RPROC_SEQ_SLEEP=5 +rproc_instances= +# Declare an array to save initial states of each instance +org_instance_to_state="" +num_tests=0 +test_err=0 + +check_error() { + if [ $? -ne 0 ]; then + test_err=$((test_err+1)) + ktap_print_msg "$@" + fi +} + +rproc_stop_instances() { + for instance in ${rproc_instances}; do + rproc=${RPROC_SYS}/$instance + rproc_name=$(cat $rproc/name) + rproc_state=$(cat $rproc/state) + + echo stop > "$rproc/state" + check_error "$rproc_name state-stop failed at state $rproc_state" + done + sleep ${RPROC_SEQ_SLEEP} +} + +rproc_start_instances() { + for instance in ${rproc_instances}; do + rproc=${RPROC_SYS}/$instance + rproc_name=$(cat $rproc/name) + rproc_state=$(cat $rproc/state) + + echo start > "$rproc/state" + check_error "$rproc_name state-start failed at state $rproc_state" + done + sleep ${RPROC_SEQ_SLEEP} +} + +rproc_seq_test_instance_one() { + instance=$1 + rproc=${RPROC_SYS}/$instance + rproc_name=$(cat $rproc/name) + rproc_state=$(cat $rproc/state) + ktap_print_msg "Testing rproc sequence for $rproc_name" + + # Reset test_err value + test_err=0 + + # Begin start/stop sequence + echo start > "$rproc/state" + check_error "$rproc_name state-start failed at state $rproc_state" + + sleep ${RPROC_SEQ_SLEEP} + + echo stop > "$rproc/state" + check_error "$rproc_name state-stop failed at state $rproc_state" + + if [ $test_err -ne 0 ]; then + ktap_test_fail "$rproc_name" + else + ktap_test_pass "$rproc_name" + fi +} + +rproc_seq_test_instances_concurrently() { + # Reset test_err value + test_err=0 + + rproc_start_instances + + rproc_stop_instances + + if [ $test_err -ne 0 ]; then + ktap_test_fail "for any of $rproc_instances" + else + ktap_test_pass "for all $rproc_instances" + fi +} + +ktap_print_header + +if [ ! -d "${RPROC_SYS}" ]; then + ktap_skip_all "${RPROC_SYS} doesn't exist." + exit "${KSFT_SKIP}" +fi + +rproc_instances=$(find ${RPROC_SYS}/remoteproc* -maxdepth 1 -exec basename {} \;) +num_tests=$(echo ${rproc_instances} | wc -w) +if [ "${num_tests}" -eq 0 ]; then + ktap_skip_all "${RPROC_SYS}/remoteproc* doesn't exist." + exit "${KSFT_SKIP}" +fi + +# Total tests will be: +# 1) Seq tests for each instance sequencially +# 2) Seq tests for all instances concurrently +num_tests=$((num_tests+1)) + +ktap_set_plan "${num_tests}" + +# Stop all instances +rproc_stop_instances + +# Test 1 +ktap_print_msg "Testing rproc start/stop sequence for each instance sequencially" +for instance in ${rproc_instances}; do + rproc_seq_test_instance_one $instance +done + +# Test 2 +ktap_print_msg "Testing rproc start/stop sequence for all instances concurrently" +rproc_seq_test_instances_concurrently + +# Restore all instances +rproc_start_instances + +ktap_finished -- 2.46.1

1 year, 2 months

2
2
0 0

[PATCH] selftests/net: Add missing va_end.

by zhangjiao2

From: zhang jiao <zhangjiao2(a)cmss.chinamobile.com> There is no va_end after va_copy, just add it. Signed-off-by: zhang jiao <zhangjiao2(a)cmss.chinamobile.com> --- tools/testing/selftests/net/tcp_ao/lib/aolib.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/tcp_ao/lib/aolib.h b/tools/testing/selftests/net/tcp_ao/lib/aolib.h index db44e77428dd..5db2f65cddc4 100644 --- a/tools/testing/selftests/net/tcp_ao/lib/aolib.h +++ b/tools/testing/selftests/net/tcp_ao/lib/aolib.h @@ -46,6 +46,7 @@ static inline char *test_snprintf(const char *fmt, va_list vargs) va_copy(tmp, vargs); n = vsnprintf(ret, size, fmt, tmp); + va_end(tmp); if (n < 0) return NULL; -- 2.33.0

1 year, 2 months

3
2
0 0

[PATCH v3 0/1] Add KUnit tests for llist

by Artur Alves

Hi all, This is part of a hackathon organized by LKCAMP[1], focused on writing tests using KUnit. We reached out a while ago asking for advice on what would be a useful contribution[2] and ended up choosing data structures that did not yet have tests. This patch adds tests for the llist data structure, defined in include/linux/llist.h, and is inspired by the KUnit tests for the doubly linked list in lib/list-test.c[3]. It is important to note that this patch depends on the patch referenced in [4], as it utilizes the newly created lib/tests/ subdirectory. [1] https://lkcamp.dev/about/ [2] https://lore.kernel.org/all/Zktnt7rjKryTh9-N@arch/ [3] https://elixir.bootlin.com/linux/latest/source/lib/list-test.c [4] https://lore.kernel.org/all/20240720181025.work.002-kees@kernel.org/ --- Changes in v3: - Resolved checkpatch warnings: - Renamed tests for macros starting with 'for_each' - Removed link from commit message - Replaced hardcoded constants with ENTRIES_SIZE - Updated initialization of llist_node array - Fixed typos - Update Kconfig.debug message for llist_kunit Changes in v2: - Add MODULE_DESCRIPTION() - Move the tests from lib/llist_kunit.c to lib/tests/llist_kunit.c - Change the license from "GPL v2" to "GPL" Artur Alves (1): lib/llist_kunit.c: add KUnit tests for llist lib/Kconfig.debug | 11 ++ lib/tests/Makefile | 1 + lib/tests/llist_kunit.c | 358 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 370 insertions(+) create mode 100644 lib/tests/llist_kunit.c -- 2.46.0

1 year, 2 months

5
10
0 0

[PATCH slab hotfixes 0/2] slub kunit tests fixes for 6.12

by Vlastimil Babka

The SLUB changes for 6.12 included new kunit tests that resulted in noisy warnings, which we normally suppress, and a boot lockup in some configurations in case the kunit tests are built-in. The warnings are addressed in Patch 1. The lockups I couldn't reproduce, but inspecting boot initialization order makes me suspect the tests (which call few RCU operations) are being executed a bit too early before RCU finishes initialization. Moving the exection later seems to do the trick, so I'd like to ask kunit folks to ack this change (Patch 2). If RCU folks have any insights, it would be welcome too. So these are now fixes for 4e1c44b3db79 ("kunit, slub: add test_kfree_rcu() and test_leak_destroy()") Once sent as a full patch, I also want to include comment fixes from Ulad for kvfree_rcu_queue_batch(): https://lore.kernel.org/all/CA%2BKHdyV%3D0dpJX_v_tcuTQ-_ree-Yb9ch3F_HqfT4Yn… The plan is to take the fixes via slab tree for a 6.12 rcX. Signed-off-by: Vlastimil Babka <vbabka(a)suse.cz> --- Vlastimil Babka (2): mm, slab: suppress warnings in test_leak_destroy kunit test kunit: move call to kunit_run_all_tests() after rcu_end_inkernel_boot() init/main.c | 4 ++-- lib/slub_kunit.c | 4 ++-- mm/slab.h | 6 ++++++ mm/slab_common.c | 5 +++-- mm/slub.c | 5 +++-- 5 files changed, 16 insertions(+), 8 deletions(-) --- base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc change-id: 20240930-b4-slub-kunit-fix-6fba4d1c1742 Best regards, -- Vlastimil Babka <vbabka(a)suse.cz>

1 year, 2 months

3
5
0 0

[PATCH] Revert "list: test: fix tests for list_cut_position()"

by Guenter Roeck

This reverts commit e620799c414a035dea1208bcb51c869744931dbb. The commit introduces unit test failures. Expected cur == &entries[i], but cur == 0000037fffadfd80 &entries[i] == 0000037fffadfd60 # list_test_list_cut_position: pass:0 fail:1 skip:0 total:1 not ok 21 list_test_list_cut_position # list_test_list_cut_before: EXPECTATION FAILED at lib/list-test.c:444 Expected cur == &entries[i], but cur == 0000037fffa9fd70 &entries[i] == 0000037fffa9fd60 # list_test_list_cut_before: EXPECTATION FAILED at lib/list-test.c:444 Expected cur == &entries[i], but cur == 0000037fffa9fd80 &entries[i] == 0000037fffa9fd70 Revert it. Fixes: e620799c414a ("list: test: fix tests for list_cut_position()") Cc: I Hsin Cheng <richard120310(a)gmail.com> Cc: David Gow <davidgow(a)google.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> --- lib/list-test.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/lib/list-test.c b/lib/list-test.c index 4f3dc75baec1..e207c4c98d70 100644 --- a/lib/list-test.c +++ b/lib/list-test.c @@ -408,13 +408,10 @@ static void list_test_list_cut_position(struct kunit *test) KUNIT_EXPECT_EQ(test, i, 2); - i = 0; list_for_each(cur, &list1) { KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } - - KUNIT_EXPECT_EQ(test, i, 1); } static void list_test_list_cut_before(struct kunit *test) @@ -439,13 +436,10 @@ static void list_test_list_cut_before(struct kunit *test) KUNIT_EXPECT_EQ(test, i, 1); - i = 0; list_for_each(cur, &list1) { KUNIT_EXPECT_PTR_EQ(test, cur, &entries[i]); i++; } - - KUNIT_EXPECT_EQ(test, i, 2); } static void list_test_list_splice(struct kunit *test) -- 2.45.2

1 year, 2 months

4
3
0 0

Re: [PATCH 6.6 000/538] 6.6.54-rc1 review

by Naresh Kamboju

On Wed, 2 Oct 2024 at 19:56, Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> wrote: > > This is the start of the stable review cycle for the 6.6.54 release. > There are 538 patches in this series, all will be posted as a response > to this one. If anyone has any issues with these being applied, please > let me know. > > Responses should be made by Fri, 04 Oct 2024 12:56:13 +0000. > Anything received after that time might be too late. > > The whole patch series can be found in one patch at: > https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.54-rc1… > or in the git tree and branch at: > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y > and the diffstat can be found below. > > thanks, > > greg k-h As other reported selftests bpf build failed, libbpf.c: In function 'bpf_object__create_map': libbpf.c:5215:50: error: 'BPF_F_VTYPE_BTF_OBJ_FD' undeclared (first use in this function) 5215 | create_attr.map_flags |= BPF_F_VTYPE_BTF_OBJ_FD; | ^~~~~~~~~~~~~~~~~~~~~~ libbpf.c:5215:50: note: each undeclared identifier is reported only once for each function it appears in due to commit, 9e926acda0c2e libbpf: Find correct module BTFs for struct_ops maps and progs. Build log: ------- - https://storage.tuxsuite.com/public/linaro/lkft/builds/2msz2dGbiCYZjR2hPFlN… Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Build * kernel: 6.6.54-rc1 * git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git * git commit: 1bbd78667e8e467cac0a2bc31d183b9d9983f448 * git describe: v6.6.53-539-g1bbd78667e8e * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.5… ## Test Regressions (compared to v6.6.51-145-g3ecfbb62e37a) ## Metric Regressions (compared to v6.6.51-145-g3ecfbb62e37a) ## Test Fixes (compared to v6.6.51-145-g3ecfbb62e37a) ## Metric Fixes (compared to v6.6.51-145-g3ecfbb62e37a) ## Test result summary total: 170988, pass: 150287, fail: 1587, skip: 18917, xfail: 197 ## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 129 total, 129 passed, 0 failed * arm64: 41 total, 41 passed, 0 failed * i386: 28 total, 26 passed, 2 failed * mips: 26 total, 25 passed, 1 failed * parisc: 4 total, 4 passed, 0 failed * powerpc: 36 total, 35 passed, 1 failed * riscv: 10 total, 10 passed, 0 failed * s390: 14 total, 13 passed, 1 failed * sh: 10 total, 10 passed, 0 failed * sparc: 7 total, 7 passed, 0 failed * x86_64: 33 total, 33 passed, 0 failed ## Test suites summary * boot * commands * kselftest-arm64 * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-efivarfs * kselftest-exec * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-filesystems-epoll * kselftest-firmware * kselftest-fpu * kselftest-ftrace * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-kcmp * kselftest-kvm * kselftest-livepatch * kselftest-membarrier * kselftest-memfd * kselftest-mincore * kselftest-mqueue * kselftest-net * kselftest-net-mptcp * kselftest-openat2 * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-tc-testing * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user_events * kselftest-vDSO * kselftest-watchdog * kselftest-x86 * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-hugetlb * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-smoke * ltp-syscalls * ltp-tracing * perf * rcutorture -- Linaro LKFT https://lkft.linaro.org

1 year, 2 months

1
0
0 0

kselftest/fixes build: 6 builds: 2 failed, 4 passed, 1 warning (v6.12-rc1-9-gc66be905cda24)

by kernelci.org bot

kselftest/fixes build: 6 builds: 2 failed, 4 passed, 1 warning (v6.12-rc1-9-gc66be905cda24) Full Build Summary: https://kernelci.org/build/kselftest/branch/fixes/kernel/v6.12-rc1-9-gc66be… Tree: kselftest Branch: fixes Git Describe: v6.12-rc1-9-gc66be905cda24 Git Commit: c66be905cda24fb782b91053b196bd2e966f95b7 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: arm64: defconfig+kselftest+arm64-chromebook: (clang-16) FAIL defconfig+kselftest+arm64-chromebook: (gcc-12) FAIL Warnings Detected: arm64: arm: i386: x86_64: x86_64_defconfig+kselftest (clang-16): 1 warning Warnings summary: 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x23: relocation to !ENDBR: .text+0x14fd19 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-12) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-16) — FAIL, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-12) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x23: relocation to !ENDBR: .text+0x14fd19 --- For more info write to <info(a)kernelci.org>

1 year, 2 months

1
0
0 0

[PATCH net v4 0/2] bpf: devmap: provide rxq after redirect

by Florian Kauer

rxq contains a pointer to the device from where the redirect happened. Currently, the BPF program that was executed after a redirect via BPF_MAP_TYPE_DEVMAP* does not have it set. Add bugfix and related selftest. Signed-off-by: Florian Kauer <florian.kauer(a)linutronix.de> --- Changes in v4: - return -> goto out_close, thanks Toke - Link to v3: https://lore.kernel.org/r/20240909-devel-koalo-fix-ingress-ifindex-v3-0-662… Changes in v3: - initialize skel to NULL, thanks Stanislav - Link to v2: https://lore.kernel.org/r/20240906-devel-koalo-fix-ingress-ifindex-v2-0-4ca… Changes in v2: - changed fixes tag - added selftest - Link to v1: https://lore.kernel.org/r/20240905-devel-koalo-fix-ingress-ifindex-v1-1-d12… --- Florian Kauer (2): bpf: devmap: provide rxq after redirect bpf: selftests: send packet to devmap redirect XDP kernel/bpf/devmap.c | 11 +- .../selftests/bpf/prog_tests/xdp_devmap_attach.c | 114 +++++++++++++++++++-- 2 files changed, 115 insertions(+), 10 deletions(-) --- base-commit: 8e69c96df771ab469cec278edb47009351de4da6 change-id: 20240905-devel-koalo-fix-ingress-ifindex-b9293d471db6 Best regards, -- Florian Kauer <florian.kauer(a)linutronix.de>

1 year, 2 months

5
7
0 0

[PATCH v5 v6.11 v5.15 v5.4 v4.19 1/1] selftests: breakpoints: use remaining time to check if suspend succeed

by Yifei Liu

step_after_suspend_test fails with device busy error while writing to /sys/power/state to start suspend. The test believes it failed to enter suspend state with $ sudo ./step_after_suspend_test TAP version 13 Bail out! Failed to enter Suspend state However, in the kernel message, I indeed see the system get suspended and then wake up later. [611172.033108] PM: suspend entry (s2idle) [611172.044940] Filesystems sync: 0.006 seconds [611172.052254] Freezing user space processes [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) [611172.067920] OOM killer disabled. [611172.072465] Freezing remaining freezable tasks [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) [611172.117126] serial 00:03: disabled some other hardware get reconnected [611203.136277] OOM killer enabled. [611203.140637] Restarting tasks ... [611203.141135] usb 1-8.1: USB disconnect, device number 7 [611203.141755] done. [611203.155268] random: crng reseeded on system resumption [611203.162059] PM: suspend exit After investigation, I noticed that for the code block if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) ksft_exit_fail_msg("Failed to enter Suspend state\n"); The write will return -1 and errno is set to 16 (device busy). It should be caused by the write function is not successfully returned before the system suspend and the return value get messed when waking up. As a result, It may be better to check the time passed of those few instructions to determine whether the suspend is executed correctly for it is pretty hard to execute those few lines for 5 seconds. The timer to wake up the system is set to expire after 5 seconds and no re-arm. If the timer remaining time is 0 second and 0 nano secomd, it means the timer expired and wake the system up. Otherwise, the system could be considered to enter the suspend state failed if there is any remaining time. After appling this patch, the test would not fail for it believes the system does not go to suspend by mistake. It now could continue to the rest part of the test after suspend. Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") Reported-by: Sinadin Shan <sinadin.shan(a)oracle.com> Signed-off-by: Yifei Liu <yifei.l.liu(a)oracle.com> --- v4->v5: Remove the above quotes in the first part. remove the incorrect format which could confuse the git. --- .../testing/selftests/breakpoints/step_after_suspend_test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/breakpoints/step_after_suspend_test.c b/tools/testing/selftests/breakpoints/step_after_suspend_test.c index dfec31fb9b30d..8d275f03e977f 100644 --- a/tools/testing/selftests/breakpoints/step_after_suspend_test.c +++ b/tools/testing/selftests/breakpoints/step_after_suspend_test.c @@ -152,7 +152,10 @@ void suspend(void) if (err < 0) ksft_exit_fail_msg("timerfd_settime() failed\n"); - if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) + system("(echo mem > /sys/power/state) 2> /dev/null"); + + timerfd_gettime(timerfd, &spec); + if (spec.it_value.tv_sec != 0 || spec.it_value.tv_nsec != 0) ksft_exit_fail_msg("Failed to enter Suspend state\n"); close(timerfd); -- 2.46.0

1 year, 2 months

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror October 2024