October 2024 - Linux-kselftest-mirror

[PATCH 0/3] debugobjects: Add hlist_cut_number() and use it to optimize code

by Zhen Lei

Zhen Lei (3): list: add hlist_cut_number() list: test: Add a test for hlist_cut_number() debugobjects: Use hlist_cut_number() to optimize performance and improve readability include/linux/list.h | 44 +++++++++++++++++ lib/debugobjects.c | 115 ++++++++++++++++++------------------------- lib/list-test.c | 51 +++++++++++++++++++ 3 files changed, 143 insertions(+), 67 deletions(-) -- 2.34.1

6 months, 2 weeks

4
11
0 0

Testing Quality Call notes - 2024-11-03

by Laura Nao

Hello, KernelCI is hosting a bi-weekly call on Thursday to discuss improvements to existing upstream tests, the development of new tests to increase kernel testing coverage, and the enablement of these tests in KernelCI. Below is a list of the tests the community has been working on and their latest status updates, as discussed in the last meeting held on 2024-11-03: *Missing devices kselftest* - Proposing new kselftest to report devices that go missing in the system (v2): https://lore.kernel.org/all/20240928-kselftest-dev-exist-v2-1-fab07de6b80b@… - Sent v2 addressing feedback received on the RFCv1 and during the session at LPC 2024: https://www.youtube.com/live/kcr8NXEbzcg?si=QWBvJAOjj7tg264o&t=11283 *Boot time test* - RFC: https://lore.kernel.org/all/20240725110622.96301-1-laura.nao@collabora.com/… - Discussed proposal at LPC2024: https://www.youtube.com/live/8XQwzUZxLK4?feature=shared&t=16944 - Planning on preparing v2, based on feedback received in the session - Suggestions for improvements and additional features include: exploring bootloader tracing via pre-filled ftrace buffers, adding support for specifying variance values on a per-event basis, investigating the use of ftrace histograms for initcalls *Device testing documentation* - Patch: https://lore.kernel.org/all/20241001-kselftest-device-docs-v1-1-be28b70dd85… - Submitted documentation on device testing, detailing the types of kselftests available, their requirements, and the coverage they provide. The goal is to guide users in selecting the appropriate tests for their devices. *GPIO test* - RFC: https://lore.kernel.org/all/20240909-kselftest-gpio-set-get-config-v1-0-16a… - Proposed a new kselftest to verify the GPIO driver functionality. The test uses a YAML-based test plan that specifies the configurations to be checked. It sets each pin configuration and retrieves it to ensure they match. Currently, the test only verifies bias settings, but it can be easily extended to cover additional pin configurations. Please reply to this thread if you'd like to join the call or discuss any of the topics further. We look forward to collaborating with the community to improve upstream tests and expand coverage to more areas of interest within the kernel. Best regards, Laura Nao

6 months, 2 weeks

1
0
0 0

[PATCH v3] lib: math: Move kunit tests into tests/ subdir

by Luis Felipe Hernandez

This patch is a follow-up task from a discussion stemming from point 3 in a recent patch introducing the int_pow kunit test [1] and documentation regarding kunit test style and nomenclature [2]. Colocate all kunit test suites in lib/math/tests/ and follow recommended naming convention for files <suite>_kunit.c and kconfig entries CONFIG_<name>_KUNIT_TEST. Link: https://lore.kernel.org/all/CABVgOS=-vh5TqHFCq_jo=ffq8v_nGgr6JsPnOZag3e6+19… [1] Link: https://docs.kernel.org/dev-tools/kunit/style.html [2] Signed-off-by: Luis Felipe Hernandez <luis.hernandez093(a)gmail.com> --- Changes in v2: Fix cc recipient list inclusion in cover letter Changes in v3: Update mul_u64_u64_div_u64_kunit.c path in comment describing shell script --- arch/m68k/configs/amiga_defconfig | 2 +- arch/m68k/configs/apollo_defconfig | 2 +- arch/m68k/configs/atari_defconfig | 2 +- arch/m68k/configs/bvme6000_defconfig | 2 +- arch/m68k/configs/hp300_defconfig | 2 +- arch/m68k/configs/mac_defconfig | 2 +- arch/m68k/configs/multi_defconfig | 2 +- arch/m68k/configs/mvme147_defconfig | 2 +- arch/m68k/configs/mvme16x_defconfig | 2 +- arch/m68k/configs/q40_defconfig | 2 +- arch/m68k/configs/sun3_defconfig | 2 +- arch/m68k/configs/sun3x_defconfig | 2 +- arch/powerpc/configs/ppc64_defconfig | 2 +- lib/Kconfig.debug | 6 +++--- lib/math/Makefile | 5 +---- lib/math/tests/Makefile | 5 ++++- lib/math/{test_div64.c => tests/div64_kunit.c} | 0 .../mul_u64_u64_div_u64_kunit.c} | 2 +- lib/math/{rational-test.c => tests/rational_kunit.c} | 0 19 files changed, 22 insertions(+), 22 deletions(-) rename lib/math/{test_div64.c => tests/div64_kunit.c} (100%) rename lib/math/{test_mul_u64_u64_div_u64.c => tests/mul_u64_u64_div_u64_kunit.c} (98%) rename lib/math/{rational-test.c => tests/rational_kunit.c} (100%) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index d01dc47d52ea..7ba9311c084c 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -619,7 +619,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 46808e581d7b..273fe4032b85 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -576,7 +576,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 4469a7839c9d..9976cda99fc1 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -596,7 +596,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index c0719322c028..f59082c8fe06 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -568,7 +568,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 8d429e63f8f2..6db3556da9ac 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -578,7 +578,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index bafd33da27c1..25c06b5c83ee 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -595,7 +595,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 6f5ca3f85ea1..35e57e0ee139 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -681,7 +681,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index d16b328c7136..d253b686119a 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -567,7 +567,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 80f6c15a5ed5..62bc6ad63783 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -568,7 +568,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 0e81589f0ee2..caba39c61bac 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -585,7 +585,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 8cd785290339..a348f645ed55 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -565,7 +565,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 78035369f60f..f8b3cfc3275b 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -566,7 +566,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_TEST_DHRY=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_REED_SOLOMON_TEST=m CONFIG_ATOMIC64_SELFTEST=m CONFIG_ASYNC_RAID6_TEST=m diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index a5e3e7f97f4d..f1f21765c0c1 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -435,7 +435,7 @@ CONFIG_KUNIT=m CONFIG_KUNIT_ALL_TESTS=m CONFIG_LKDTM=m CONFIG_TEST_MIN_HEAP=m -CONFIG_TEST_DIV64=m +CONFIG_DIV64_KUNIT_TEST=m CONFIG_BACKTRACE_SELF_TEST=m CONFIG_TEST_REF_TRACKER=m CONFIG_RBTREE_TEST=m diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 7315f643817a..0d6c979f0bfd 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2296,7 +2296,7 @@ config TEST_SORT If unsure, say N. -config TEST_DIV64 +config DIV64_KUNIT_TEST tristate "64bit/32bit division and modulo test" depends on DEBUG_KERNEL || m help @@ -2306,7 +2306,7 @@ config TEST_DIV64 If unsure, say N. -config TEST_MULDIV64 +config MULDIV64_KUNIT_TEST tristate "mul_u64_u64_div_u64() test" depends on DEBUG_KERNEL || m help @@ -3089,7 +3089,7 @@ endmenu # "Rust" endmenu # Kernel hacking -config INT_POW_TEST +config INT_POW_KUNIT_TEST tristate "Integer exponentiation (int_pow) test" if !KUNIT_ALL_TESTS depends on KUNIT default KUNIT_ALL_TESTS diff --git a/lib/math/Makefile b/lib/math/Makefile index 3ef11305f8d2..1c489501ff57 100644 --- a/lib/math/Makefile +++ b/lib/math/Makefile @@ -5,7 +5,4 @@ obj-$(CONFIG_CORDIC) += cordic.o obj-$(CONFIG_PRIME_NUMBERS) += prime_numbers.o obj-$(CONFIG_RATIONAL) += rational.o -obj-$(CONFIG_INT_POW_TEST) += tests/int_pow_kunit.o -obj-$(CONFIG_TEST_DIV64) += test_div64.o -obj-$(CONFIG_TEST_MULDIV64) += test_mul_u64_u64_div_u64.o -obj-$(CONFIG_RATIONAL_KUNIT_TEST) += rational-test.o +obj-y += tests/ diff --git a/lib/math/tests/Makefile b/lib/math/tests/Makefile index 6a169123320a..f9a0a0e6b73a 100644 --- a/lib/math/tests/Makefile +++ b/lib/math/tests/Makefile @@ -1,3 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_INT_POW_TEST) += int_pow_kunit.o +obj-$(CONFIG_DIV64_KUNIT_TEST) += div64_kunit.o +obj-$(CONFIG_INT_POW_KUNIT_TEST) += int_pow_kunit.o +obj-$(CONFIG_MULDIV64_KUNIT_TEST) += mul_u64_u64_div_u64_kunit.o +obj-$(CONFIG_RATIONAL_KUNIT_TEST) += rational_kunit.o diff --git a/lib/math/test_div64.c b/lib/math/tests/div64_kunit.c similarity index 100% rename from lib/math/test_div64.c rename to lib/math/tests/div64_kunit.c diff --git a/lib/math/test_mul_u64_u64_div_u64.c b/lib/math/tests/mul_u64_u64_div_u64_kunit.c similarity index 98% rename from lib/math/test_mul_u64_u64_div_u64.c rename to lib/math/tests/mul_u64_u64_div_u64_kunit.c index 58d058de4e73..f61f571a0a2e 100644 --- a/lib/math/test_mul_u64_u64_div_u64.c +++ b/lib/math/tests/mul_u64_u64_div_u64_kunit.c @@ -49,7 +49,7 @@ static test_params test_values[] = { * * #!/bin/sh * sed -ne 's/^{ \+$.*$, \+$.*$, \+$.*$, \+$.*$ },$/\1 \2 \3 \4/p' \ - * lib/math/test_mul_u64_u64_div_u64.c | + * lib/math/tests/mul_u64_u64_div_u64_kunit.c | * while read a b c r; do * expected=$( printf "obase=16; ibase=16; %X * %X / %X\n" $a $b $c | bc ) * given=$( printf "%X\n" $r ) diff --git a/lib/math/rational-test.c b/lib/math/tests/rational_kunit.c similarity index 100% rename from lib/math/rational-test.c rename to lib/math/tests/rational_kunit.c -- 2.46.2

6 months, 2 weeks

2
1
0 0

[PATCH v14 0/5] KVM: arm64: Provide guest support for GCS

by Mark Brown

The arm64 Guarded Control Stack (GCS) feature provides support for hardware protected stacks of return addresses, intended to provide hardening against return oriented programming (ROP) attacks and to make it easier to gather call stacks for applications such as profiling. When GCS is active a secondary stack called the Guarded Control Stack is maintained, protected with a memory attribute which means that it can only be written with specific GCS operations. The current GCS pointer can not be directly written to by userspace. When a BL is executed the value stored in LR is also pushed onto the GCS, and when a RET is executed the top of the GCS is popped and compared to LR with a fault being raised if the values do not match. GCS operations may only be performed on GCS pages, a data abort is generated if they are not. The combination of hardware enforcement and lack of extra instructions in the function entry and exit paths should result in something which has less overhead and is more difficult to attack than a purely software implementation like clang's shadow stacks. This series implements support for managing GCS for KVM guests, it also includes a fix for S1PIE which has also been sent separately as this feature is a dependency for GCS. It is based on: https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git for-next/gcs Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v14: - Rebase onto arm64/for-next/gcs which includes all the non-KVM support. - Manage the fine grained traps for GCS instructions. - Manage PSTATE.EXLOCK when delivering exceptions to KVM guests. - Link to v13: https://lore.kernel.org/r/20241001-arm64-gcs-v13-0-222b78d87eee@kernel.org Changes in v13: - Rebase onto v6.12-rc1. - Allocate VM_HIGH_ARCH_6 since protection keys used all the existing bits. - Implement mm_release() and free transparently allocated GCSs there. - Use bit 32 of AT_HWCAP for GCS due to AT_HWCAP2 being filled. - Since we now only set GCSCRE0_EL1 on change ensure that it is initialised with GCSPR_EL0 accessible to EL0. - Fix OOM handling on thread copy. - Link to v12: https://lore.kernel.org/r/20240829-arm64-gcs-v12-0-42fec947436a@kernel.org Changes in v12: - Clarify and simplify the signal handling code so we work with the register state. - When checking for write aborts to shadow stack pages ensure the fault is a data abort. - Depend on !UPROBES. - Comment cleanups. - Link to v11: https://lore.kernel.org/r/20240822-arm64-gcs-v11-0-41b81947ecb5@kernel.org Changes in v11: - Remove the dependency on the addition of clone3() support for shadow stacks, rebasing onto v6.11-rc3. - Make ID_AA64PFR1_EL1.GCS writeable in KVM. - Hide GCS registers when GCS is not enabled for KVM guests. - Require HCRX_EL2.GCSEn if booting at EL1. - Require that GCSCR_EL1 and GCSCRE0_EL1 be initialised regardless of if we boot at EL2 or EL1. - Remove some stray use of bit 63 in signal cap tokens. - Warn if we see a GCS with VM_SHARED. - Remove rdundant check for VM_WRITE in fault handling. - Cleanups and clarifications in the ABI document. - Clean up and improve documentation of some sync placement. - Only set the EL0 GCS mode if it's actually changed. - Various minor fixes and tweaks. - Link to v10: https://lore.kernel.org/r/20240801-arm64-gcs-v10-0-699e2bd2190b@kernel.org Changes in v10: - Fix issues with THP. - Tighten up requirements for initialising GCSCR*. - Only generate GCS signal frames for threads using GCS. - Only context switch EL1 GCS registers if S1PIE is enabled. - Move context switch of GCSCRE0_EL1 to EL0 context switch. - Make GCS registers unconditionally visible to userspace. - Use FHU infrastructure. - Don't change writability of ID_AA64PFR1_EL1 for KVM. - Remove unused arguments from alloc_gcs(). - Typo fixes. - Link to v9: https://lore.kernel.org/r/20240625-arm64-gcs-v9-0-0f634469b8f0@kernel.org Changes in v9: - Rebase onto v6.10-rc3. - Restructure and clarify memory management fault handling. - Fix up basic-gcs for the latest clone3() changes. - Convert to newly merged KVM ID register based feature configuration. - Fixes for NV traps. - Link to v8: https://lore.kernel.org/r/20240203-arm64-gcs-v8-0-c9fec77673ef@kernel.org Changes in v8: - Invalidate signal cap token on stack when consuming. - Typo and other trivial fixes. - Don't try to use process_vm_write() on GCS, it intentionally does not work. - Fix leak of thread GCSs. - Rebase onto latest clone3() series. - Link to v7: https://lore.kernel.org/r/20231122-arm64-gcs-v7-0-201c483bd775@kernel.org Changes in v7: - Rebase onto v6.7-rc2 via the clone3() patch series. - Change the token used to cap the stack during signal handling to be compatible with GCSPOPM. - Fix flags for new page types. - Fold in support for clone3(). - Replace copy_to_user_gcs() with put_user_gcs(). - Link to v6: https://lore.kernel.org/r/20231009-arm64-gcs-v6-0-78e55deaa4dd@kernel.org Changes in v6: - Rebase onto v6.6-rc3. - Add some more gcsb_dsync() barriers following spec clarifications. - Due to ongoing discussion around clone()/clone3() I've not updated anything there, the behaviour is the same as on previous versions. - Link to v5: https://lore.kernel.org/r/20230822-arm64-gcs-v5-0-9ef181dd6324@kernel.org Changes in v5: - Don't map any permissions for user GCSs, we always use EL0 accessors or use a separate mapping of the page. - Reduce the standard size of the GCS to RLIMIT_STACK/2. - Enforce a PAGE_SIZE alignment requirement on map_shadow_stack(). - Clarifications and fixes to documentation. - More tests. - Link to v4: https://lore.kernel.org/r/20230807-arm64-gcs-v4-0-68cfa37f9069@kernel.org Changes in v4: - Implement flags for map_shadow_stack() allowing the cap and end of stack marker to be enabled independently or not at all. - Relax size and alignment requirements for map_shadow_stack(). - Add more blurb explaining the advantages of hardware enforcement. - Link to v3: https://lore.kernel.org/r/20230731-arm64-gcs-v3-0-cddf9f980d98@kernel.org Changes in v3: - Rebase onto v6.5-rc4. - Add a GCS barrier on context switch. - Add a GCS stress test. - Link to v2: https://lore.kernel.org/r/20230724-arm64-gcs-v2-0-dc2c1d44c2eb@kernel.org Changes in v2: - Rebase onto v6.5-rc3. - Rework prctl() interface to allow each bit to be locked independently. - map_shadow_stack() now places the cap token based on the size requested by the caller not the actual space allocated. - Mode changes other than enable via ptrace are now supported. - Expand test coverage. - Various smaller fixes and adjustments. - Link to v1: https://lore.kernel.org/r/20230716-arm64-gcs-v1-0-bf567f93bba6@kernel.org --- Mark Brown (5): KVM: arm64: Expose S1PIE to guests arm64/gcs: Ensure FGTs for EL1 GCS instructions are disabled KVM: arm64: Manage GCS access and registers for guests KVM: arm64: Set PSTATE.EXLOCK when entering an exception KVM: selftests: arm64: Add GCS registers to get-reg-list arch/arm64/include/asm/el2_setup.h | 7 ++++- arch/arm64/include/asm/kvm_host.h | 12 ++++++++ arch/arm64/include/asm/vncr_mapping.h | 2 ++ arch/arm64/include/uapi/asm/ptrace.h | 2 ++ arch/arm64/kvm/hyp/exception.c | 10 +++++++ arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 31 +++++++++++++++++++ arch/arm64/kvm/sys_regs.c | 35 ++++++++++++++++++++-- tools/testing/selftests/kvm/aarch64/get-reg-list.c | 28 +++++++++++++++++ 8 files changed, 124 insertions(+), 3 deletions(-) --- base-commit: ed4983d2da8c3b66ac6d048beb242916bec83522 change-id: 20230303-arm64-gcs-e311ab0d8729 Best regards, -- Mark Brown <broonie(a)kernel.org>

6 months, 2 weeks

2
15
0 0

[PATCH] selftests: Do not skip BPF selftests by default

by Björn Töpel

From: Björn Töpel <bjorn(a)rivosinc.com> This effectively is a revert of commit 7a6eb7c34a78 ("selftests: Skip BPF seftests by default"). At the time when this was added, BPF had "build time dependencies on cutting edge versions". Since then a number of BPF capable tests has been included in net, hid, sched_ext. There is no reason not to include BPF by default in the build. Remove BPF from the selftests skiplist. Signed-off-by: Björn Töpel <bjorn(a)rivosinc.com> --- tools/testing/selftests/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index b38199965f99..88f59a5fef96 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -129,10 +129,8 @@ ifeq ($(filter net/lib,$(TARGETS)),) endif endif -# User can optionally provide a TARGETS skiplist. By default we skip -# BPF since it has cutting edge build time dependencies which require -# more effort to install. -SKIP_TARGETS ?= bpf +# User can optionally provide a TARGETS skiplist. +SKIP_TARGETS ?= ifneq ($(SKIP_TARGETS),) TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS)) override TARGETS := $(TMP) base-commit: 0c559323bbaabee7346c12e74b497e283aaafef5 -- 2.43.0

6 months, 2 weeks

3
6
0 0

[GIT PULL] Kselftest fixes update for Linux 6.12-rc2

by Shuah Khan

Hi Linus, Please pull this kselftest fixes update for Linux 6.12-rc2. This kselftest fixes update for Linux 6.12-rc2 consists of fixes to build warnings, install scripts, run-time error path, and git status cleanups to tests: -- devices/probe: fix for Python3 regex string syntax warnings -- clone3: removing unused macro from clone3_cap_checkpoint_restore() -- vDSO: fix to align getrandom states to cache line -- core and exec: add missing executables to .gitignore files -- rtc: change to skip test if /dev/rtc0 can't be accessed -- timers/posix: fix warn_unused_result result in __fatal_error() -- breakpoints: fix to detect suspend successful condition correctly -- hid: fix to install required dependencies to run the test diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 9852d85ec9d492ebef56dc5f229416c925758edc: Linux 6.12-rc1 (2024-09-29 15:06:19 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-fixes-6.12-rc2 for you to fetch changes up to c66be905cda24fb782b91053b196bd2e966f95b7: selftests: breakpoints: use remaining time to check if suspend succeed (2024-10-02 14:37:30 -0600) ---------------------------------------------------------------- linux_kselftest-fixes-6.12-rc2 This kselftest fixes update for Linux 6.12-rc2 consists of fixes to build warnings, install scripts, run-time error path, and git status cleanups to tests: -- devices/probe: fix for Python3 regex string syntax warnings -- clone3: removing unused macro from clone3_cap_checkpoint_restore() -- vDSO: fix to align getrandom states to cache line -- core and exec: add missing executables to .gitignore files -- rtc: change to skip test if /dev/rtc0 can't be accessed -- timers/posix: fix warn_unused_result result in __fatal_error() -- breakpoints: fix to detect suspend successful condition correctly -- hid: fix to install required dependencies to run the test ---------------------------------------------------------------- Alessandro Zanni (1): kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3 Ba Jing (1): clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro Jason A. Donenfeld (1): selftests: vDSO: align getrandom states to cache line Javier Carrasco (2): selftests: core: add unshare_test to gitignore selftests: exec: update gitignore for load_address Joseph Jang (1): selftest: rtc: Check if could access /dev/rtc0 before testing Shuah Khan (1): selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error() Yifei Liu (1): selftests: breakpoints: use remaining time to check if suspend succeed Yun Lu (1): selftest: hid: add missing run-hid-tools-tests.sh .../testing/selftests/breakpoints/step_after_suspend_test.c | 5 ++++- .../testing/selftests/clone3/clone3_cap_checkpoint_restore.c | 2 -- tools/testing/selftests/core/.gitignore | 1 + .../selftests/devices/probe/test_discoverable_devices.py | 4 ++-- tools/testing/selftests/exec/.gitignore | 3 ++- tools/testing/selftests/hid/Makefile | 2 ++ tools/testing/selftests/rtc/rtctest.c | 11 ++++++++++- tools/testing/selftests/timers/posix_timers.c | 12 ++++++++---- tools/testing/selftests/vDSO/vdso_test_getrandom.c | 8 +++++--- 9 files changed, 34 insertions(+), 14 deletions(-) ----------------------------------------------------------------

6 months, 2 weeks

2
1
0 0

[PATCH net-next v2 0/2] selftests: net: ioam: add tunsrc support

by Justin Iurman

v2: - v1 missed the merge window, so while we're at it... - split changes into two patches instead of one for readability (#1 removes the ioam selftests, #2 adds the updated ioam selftests) TL;DR This patch comes from a discussion we had with Jakub and Paolo on aligning the ioam selftests with its new "tunsrc" feature. This patch updates the IOAM selftests to support the new "tunsrc" feature of IOAM. As a consequence, some changes were required. For example, the IPv6 header must be accessed to check some fields (i.e., the source address for the "tunsrc" feature), which is not possible AFAIK with IPv6 raw sockets. The latter is currently used with IPV6_RECVHOPOPTS and was introduced by commit 187bbb6968af ("selftests: ioam: refactoring to align with the fix") to fix an issue. But, we really need packet sockets actually... which is one of the changes in this patch (see the description of the topology at the top of ioam6.sh for explanations). Another change is that all IPv6 addresses used in the topology are now based on the documentation prefix (2001:db8::/32). Also, the tests have been improved and there are now many more of them. Overall, the script is more robust. Justin Iurman (2): selftests: net: remove ioam tests selftests: net: add new ioam tests tools/testing/selftests/net/ioam6.sh | 1832 +++++++++++++++----- tools/testing/selftests/net/ioam6_parser.c | 1087 ++++++++---- 2 files changed, 2129 insertions(+), 790 deletions(-) -- 2.34.1

6 months, 2 weeks

2
3
0 0

[PATCH net-next] selftest/ptp: update ptp selftest to exercise the gettimex options

by Mahesh Bandewar

With the inclusion of commit c259acab839e ("ptp/ioctl: support MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime() now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW timebases along with the previously supported CLOCK_REALTIME. This patch adds a command line option 'y' to the testptp program to choose one of the allowed timebases [realtime aka system, monotonic, and monotonic-raw). Signed-off-by: Mahesh Bandewar <maheshb(a)google.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Richard Cochran <richardcochran(a)gmail.com> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Jakub Kicinski <kuba(a)kernel.org> --- tools/testing/selftests/ptp/testptp.c | 62 ++++++++++++++++++++++++--- 1 file changed, 57 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/ptp/testptp.c b/tools/testing/selftests/ptp/testptp.c index 011252fe238c..58064151f2c8 100644 --- a/tools/testing/selftests/ptp/testptp.c +++ b/tools/testing/selftests/ptp/testptp.c @@ -146,6 +146,7 @@ static void usage(char *progname) " -T val set the ptp clock time to 'val' seconds\n" " -x val get an extended ptp clock time with the desired number of samples (up to %d)\n" " -X get a ptp clock cross timestamp\n" + " -y val pre/post tstamp timebase to use {realtime|monotonic|monotonic-raw}\n" " -z test combinations of rising/falling external time stamp flags\n", progname, PTP_MAX_SAMPLES); } @@ -189,6 +190,7 @@ int main(int argc, char *argv[]) int seconds = 0; int settime = 0; int channel = -1; + clockid_t ext_clockid = CLOCK_REALTIME; int64_t t1, t2, tp; int64_t interval, offset; @@ -198,7 +200,7 @@ int main(int argc, char *argv[]) progname = strrchr(argv[0], '/'); progname = progname ? 1+progname : argv[0]; - while (EOF != (c = getopt(argc, argv, "cd:e:f:F:ghH:i:k:lL:n:o:p:P:sSt:T:w:x:Xz"))) { + while (EOF != (c = getopt(argc, argv, "cd:e:f:F:ghH:i:k:lL:n:o:p:P:sSt:T:w:x:Xy:z"))) { switch (c) { case 'c': capabilities = 1; @@ -278,6 +280,21 @@ int main(int argc, char *argv[]) case 'X': getcross = 1; break; + case 'y': + if (!strcasecmp(optarg, "realtime")) + ext_clockid = CLOCK_REALTIME; + else if (!strcasecmp(optarg, "monotonic")) + ext_clockid = CLOCK_MONOTONIC; + else if (!strcasecmp(optarg, "monotonic-raw")) + ext_clockid = CLOCK_MONOTONIC_RAW; + else { + fprintf(stderr, + "type needs to be realtime, monotonic or monotonic-raw; was given %s\n", + optarg); + return -1; + } + break; + case 'z': flagtest = 1; break; @@ -566,6 +583,7 @@ int main(int argc, char *argv[]) } soe->n_samples = getextended; + soe->clockid = ext_clockid; if (ioctl(fd, PTP_SYS_OFFSET_EXTENDED, soe)) { perror("PTP_SYS_OFFSET_EXTENDED"); @@ -574,12 +592,46 @@ int main(int argc, char *argv[]) getextended); for (i = 0; i < getextended; i++) { - printf("sample #%2d: system time before: %lld.%09u\n", - i, soe->ts[i][0].sec, soe->ts[i][0].nsec); + switch (ext_clockid) { + case CLOCK_REALTIME: + printf("sample #%2d: real time before: %lld.%09u\n", + i, soe->ts[i][0].sec, + soe->ts[i][0].nsec); + break; + case CLOCK_MONOTONIC: + printf("sample #%2d: monotonic time before: %lld.%09u\n", + i, soe->ts[i][0].sec, + soe->ts[i][0].nsec); + break; + case CLOCK_MONOTONIC_RAW: + printf("sample #%2d: monotonic-raw time before: %lld.%09u\n", + i, soe->ts[i][0].sec, + soe->ts[i][0].nsec); + break; + default: + break; + } printf(" phc time: %lld.%09u\n", soe->ts[i][1].sec, soe->ts[i][1].nsec); - printf(" system time after: %lld.%09u\n", - soe->ts[i][2].sec, soe->ts[i][2].nsec); + switch (ext_clockid) { + case CLOCK_REALTIME: + printf(" real time after: %lld.%09u\n", + soe->ts[i][2].sec, + soe->ts[i][2].nsec); + break; + case CLOCK_MONOTONIC: + printf(" monotonic time after: %lld.%09u\n", + soe->ts[i][2].sec, + soe->ts[i][2].nsec); + break; + case CLOCK_MONOTONIC_RAW: + printf(" monotonic-raw time after: %lld.%09u\n", + soe->ts[i][2].sec, + soe->ts[i][2].nsec); + break; + default: + break; + } } } -- 2.46.1.824.gd892dcdcdd-goog

6 months, 2 weeks

3
2
0 0

[PATCH net v5] selftests: net: no_forwarding: fix VID for $swp2 in one_bridge_two_pvids() test

by Kacper Ludwinski

Currently, the second bridge command overwrites the first one. Fix this by adding this VID to the interface behind $swp2. The one_bridge_two_pvids() test intends to check that there is no leakage of traffic between bridge ports which have a single VLAN - the PVID VLAN. Because of a typo, port $swp1 is configured with a PVID twice (second command overwrites first), and $swp2 isn't configured at all (and since the bridge vlan_default_pvid property is set to 0, this port will not have a PVID at all, so it will drop all untagged and priority-tagged traffic). So, instead of testing the configuration that was intended, we are testing a different one, where one port has PVID 2 and the other has no PVID. This incorrect version of the test should also pass, but is ineffective for its purpose, so fix the typo. This typo has an impact on results of the test, potentially leading to wrong conclusions regarding the functionality of a network device. The tests results: TEST: Switch ports in VLAN-aware bridge with different PVIDs: Unicast non-IP untagged [ OK ] Multicast non-IP untagged [ OK ] Broadcast non-IP untagged [ OK ] Unicast IPv4 untagged [ OK ] Multicast IPv4 untagged [ OK ] Unicast IPv6 untagged [ OK ] Multicast IPv6 untagged [ OK ] Unicast non-IP VID 1 [ OK ] Multicast non-IP VID 1 [ OK ] Broadcast non-IP VID 1 [ OK ] Unicast IPv4 VID 1 [ OK ] Multicast IPv4 VID 1 [ OK ] Unicast IPv6 VID 1 [ OK ] Multicast IPv6 VID 1 [ OK ] Unicast non-IP VID 4094 [ OK ] Multicast non-IP VID 4094 [ OK ] Broadcast non-IP VID 4094 [ OK ] Unicast IPv4 VID 4094 [ OK ] Multicast IPv4 VID 4094 [ OK ] Unicast IPv6 VID 4094 [ OK ] Multicast IPv6 VID 4094 [ OK ] Fixes: 476a4f05d9b8 ("selftests: forwarding: add a no_forwarding.sh test") Reviewed-by: Hangbin Liu <liuhangbin(a)gmail.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Kacper Ludwinski <kac.ludwinski(a)icloud.com> --- tools/testing/selftests/net/forwarding/no_forwarding.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) v5: - Add test results impacted by the changes - Fix typo in commit message v4: - Add revision history od this patch - Add "Reviewed-by:" - Limit number of characters in commit to 80 - Add impact explanation to commit message - Link: https://lore.kernel.org/linux-kselftest/20240930063543.94247-1-kac.ludwinsk… v3: - Edit commit message - Add missing Signed-off-by - Link: https://lore.kernel.org/linux-kselftest/20240927112824.339-1-kac.ludwinski@… v2: - Add missing CCs - Fix typo in commit message - Add target name - Link: https://lore.kernel.org/linux-kselftest/fQknN_r6POzmrp8UVjyA3cknLnB1HB9I_jf… v1: - Link: https://lore.kernel.org/linux-kselftest/20240925050539.1906-1-kacper@ludwin… diff --git a/tools/testing/selftests/net/forwarding/no_forwarding.sh b/tools/testing/selftests/net/forwarding/no_forwarding.sh index 9e677aa64a06..694ece9ba3a7 100755 --- a/tools/testing/selftests/net/forwarding/no_forwarding.sh +++ b/tools/testing/selftests/net/forwarding/no_forwarding.sh @@ -202,7 +202,7 @@ one_bridge_two_pvids() ip link set $swp2 master br0 bridge vlan add dev $swp1 vid 1 pvid untagged - bridge vlan add dev $swp1 vid 2 pvid untagged + bridge vlan add dev $swp2 vid 2 pvid untagged run_test "Switch ports in VLAN-aware bridge with different PVIDs" -- 2.43.0

6 months, 2 weeks

2
1
0 0

[PATCH V2 00/13] selftests/resctrl: Support diverse platforms with MBM and MBA tests

by Reinette Chatre

Changes since V1: - V1: https://lore.kernel.org/cover.1724970211.git.reinette.chatre@intel.com/ - V2 contains the same general solutions to stated problem as V1 but these are now preceded by more fixes (patches 1 to 5) and improved robustness (patches 6 to 9) to existing tests before the series gets back to solving the original problem with more confidence in patches 10 to 13. - The posibility of making "memflush = false" for CMT test was discussed during V1. Modifying this setting does not have a significant impact on the observed results that are already well within acceptable range and this version thus keeps original default. If performance was a goal it may be possible to do further experimentation where "memflush = false" could eliminate the need for the sleep(1) within the test wrapper, but improving the performance is not a goal of this work. - (New) Support what seems to be unintended ability for user space to provide parameters to "fill_buf" by making the parsing robust and only support changing parameters that are supported to be changed. Drop support for "write" operation since it has never been measured. - (New) Improve wraparound handling. (Ilpo) - (New) A couple of new fixes addressing issues discovered during development. - (Change from V1) To support fill_buf parameters provided by user space as well as test specific fill_buf parameters struct fill_buf_param is no longer just a member of struct resctrl_val_param, instead there could be at most two instances of struct fill_buf_param, the immutable parameters provided by user space and the parameters used by individual tests. (Ilpo) - Please see individual patches for detailed changes. V1 cover: The resctrl selftests for Memory Bandwidth Allocation (MBA) and Memory Bandwidth Monitoring (MBM) are failing on some (for example [1]) Emerald Rapids systems. The test failures result from the following two properties of these systems: 1) Emerald Rapids systems can have up to 320MB L3 cache. The resctrl MBA and MBM selftests measure memory traffic for which a hardcoded 250MB buffer has been sufficient so far. On platforms with L3 cache larger than the buffer, the buffer fits in the L3 cache and thus no/very little memory traffic is generated during the "memory bandwidth" tests. 2) Some platform features, for example RAS features or memory performance features that generate memory traffic may drive accesses that are counted differently by performance counters and MBM respectively, for instance generating "overhead" traffic which is not counted against any specific RMID. Until now these counting differences have always been "in the noise". On Emerald Rapids systems the maximum MBA throttling (10% memory bandwidth) throttles memory bandwidth to where memory accesses by these other platform features push the memory bandwidth difference between memory controller performance counters and resctrl (MBM) beyond the tests' hardcoded tolerance. Make the tests more robust against platform variations: 1) Let the buffer used by memory bandwidth tests be guided by the size of the L3 cache. 2) Larger buffers require longer initialization time before the buffer can be used to measurement. Rework the tests to ensure that buffer initialization is complete before measurements start. 3) Do not compare performance counters and MBM measurements at low bandwidth. The value of "low" is hardcoded to 750MiB based on measurements on Emerald Rapids, Sapphire Rapids, and Ice Lake systems. This limit is not applicable to AMD systems since it only applies to the MBA and MBM tests that are isolated to Intel. [1] https://ark.intel.com/content/www/us/en/ark/products/237261/intel-xeon-plat… Reinette Chatre (13): selftests/resctrl: Make functions only used in same file static selftests/resctrl: Print accurate buffer size as part of MBM results selftests/resctrl: Fix memory overflow due to unhandled wraparound selftests/resctrl: Protect against array overrun during iMC config parsing selftests/resctrl: Make wraparound handling obvious selftests/resctrl: Remove "once" parameter required to be false selftests/resctrl: Only support measured read operation selftests/resctrl: Remove unused measurement code selftests/resctrl: Make benchmark parameter passing robust selftests/resctrl: Ensure measurements skip initialization of default benchmark selftests/resctrl: Use cache size to determine "fill_buf" buffer size selftests/resctrl: Do not compare performance counters and resctrl at low bandwidth selftests/resctrl: Keep results from first test run tools/testing/selftests/resctrl/cmt_test.c | 37 +- tools/testing/selftests/resctrl/fill_buf.c | 40 +- tools/testing/selftests/resctrl/mba_test.c | 52 +- tools/testing/selftests/resctrl/mbm_test.c | 38 +- tools/testing/selftests/resctrl/resctrl.h | 73 ++- .../testing/selftests/resctrl/resctrl_tests.c | 95 +++- tools/testing/selftests/resctrl/resctrl_val.c | 445 +++++------------- tools/testing/selftests/resctrl/resctrlfs.c | 17 - 8 files changed, 339 insertions(+), 458 deletions(-) -- 2.46.0

6 months, 2 weeks

2
29
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror October 2024