October 2024 - Linux-kselftest-mirror

[PATCH bpf-next] selftests/bpf: Use make/remove netns helpers in mptcp

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> New netns selftest helpers make_netns() and remove_netns() has been added in network_helpers.c, let's use them in mptcp selftests too. Signed-off-by: Geliang Tang <tanggeliang(a)kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- tools/testing/selftests/bpf/prog_tests/mptcp.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/mptcp.c b/tools/testing/selftests/bpf/prog_tests/mptcp.c index d2ca32fa3b21..8276398f7d6a 100644 --- a/tools/testing/selftests/bpf/prog_tests/mptcp.c +++ b/tools/testing/selftests/bpf/prog_tests/mptcp.c @@ -66,12 +66,18 @@ struct mptcp_storage { static struct nstoken *create_netns(void) { - SYS(fail, "ip netns add %s", NS_TEST); - SYS(fail, "ip -net %s link set dev lo up", NS_TEST); + struct nstoken *nstoken; - return open_netns(NS_TEST); -fail: - return NULL; + if (make_netns(NS_TEST) < 0) + return NULL; + + nstoken = open_netns(NS_TEST); + if (!nstoken) { + log_err("open netns %s failed", NS_TEST); + remove_netns(NS_TEST); + } + + return nstoken; } static void cleanup_netns(struct nstoken *nstoken) @@ -79,7 +85,7 @@ static void cleanup_netns(struct nstoken *nstoken) if (nstoken) close_netns(nstoken); - SYS_NOFAIL("ip netns del %s", NS_TEST); + remove_netns(NS_TEST); } static int start_mptcp_server(int family, const char *addr_str, __u16 port, -- 2.45.2

5 months, 3 weeks

2
1
0 0

[PATCH 0/9] arm64: Support 2024 dpISA extensions

by Mark Brown

The 2024 architecture release includes a number of data processing extensions, mostly SVE and SME additions with a few others. These are all very straightforward extensions which add instructions but no architectural state so only need hwcaps and exposing of the ID registers to KVM guests and userspace. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Mark Brown (9): arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09 arm64/hwcap: Describe 2024 dpISA extensions to userspace KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1 kselftest/arm64: Add 2024 dpISA extensions to hwcap test Documentation/arch/arm64/elf_hwcaps.rst | 51 ++++++ arch/arm64/include/asm/hwcap.h | 17 ++ arch/arm64/include/uapi/asm/hwcap.h | 17 ++ arch/arm64/kernel/cpufeature.c | 35 ++++ arch/arm64/kernel/cpuinfo.c | 17 ++ arch/arm64/kvm/sys_regs.c | 3 +- arch/arm64/tools/sysreg | 87 +++++++++- tools/testing/selftests/arm64/abi/hwcap.c | 273 +++++++++++++++++++++++++++++- 8 files changed, 490 insertions(+), 10 deletions(-) --- base-commit: 8e929cb546ee42c9a61d24fae60605e9e3192354 change-id: 20241008-arm64-2024-dpisa-8091074a7f48 Best regards, -- Mark Brown <broonie(a)kernel.org>

5 months, 3 weeks

2
11
0 0

[PATCH v2] selftests: tc-testing: Fix typo error

by Karan Sanghavi

Correct the typo errors in json files - "diffferent" is corrected to "different". - "muliple" and "miltiple" is corrected to "multiple". Reviewed-by: Simon Horman <horms(a)kernel.org> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Karan Sanghavi <karansanghvi98(a)gmail.com> --- Changes in v2: - Rewrote short log and commit message - Link to v1: https://lore.kernel.org/r/20241019-multiple_spell_error-v1-1-facff43b5610@g… --- tools/testing/selftests/tc-testing/tc-tests/filters/basic.json | 6 +++--- tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json | 6 +++--- tools/testing/selftests/tc-testing/tc-tests/filters/flow.json | 2 +- tools/testing/selftests/tc-testing/tc-tests/filters/route.json | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/basic.json b/tools/testing/selftests/tc-testing/tc-tests/filters/basic.json index d1278de8ebc3..c9309a44a87e 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/basic.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/basic.json @@ -67,7 +67,7 @@ }, { "id": "4943", - "name": "Add basic filter with cmp ematch u32/link layer and miltiple actions", + "name": "Add basic filter with cmp ematch u32/link layer and multiple actions", "category": [ "filter", "basic" @@ -155,7 +155,7 @@ }, { "id": "32d8", - "name": "Add basic filter with cmp ematch u32/network layer and miltiple actions", + "name": "Add basic filter with cmp ematch u32/network layer and multiple actions", "category": [ "filter", "basic" @@ -243,7 +243,7 @@ }, { "id": "62d7", - "name": "Add basic filter with cmp ematch u32/transport layer and miltiple actions", + "name": "Add basic filter with cmp ematch u32/transport layer and multiple actions", "category": [ "filter", "basic" diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json b/tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json index 03723cf84379..35c9a7dbe1c4 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/cgroup.json @@ -67,7 +67,7 @@ }, { "id": "0234", - "name": "Add cgroup filter with cmp ematch u32/link layer and miltiple actions", + "name": "Add cgroup filter with cmp ematch u32/link layer and multiple actions", "category": [ "filter", "cgroup" @@ -155,7 +155,7 @@ }, { "id": "2733", - "name": "Add cgroup filter with cmp ematch u32/network layer and miltiple actions", + "name": "Add cgroup filter with cmp ematch u32/network layer and multiple actions", "category": [ "filter", "cgroup" @@ -1189,7 +1189,7 @@ }, { "id": "4319", - "name": "Replace cgroup filter with diffferent match", + "name": "Replace cgroup filter with different match", "category": [ "filter", "cgroup" diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json b/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json index 58189327f644..996448afe31b 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/flow.json @@ -507,7 +507,7 @@ }, { "id": "4341", - "name": "Add flow filter with muliple ops", + "name": "Add flow filter with multiple ops", "category": [ "filter", "flow" diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/route.json b/tools/testing/selftests/tc-testing/tc-tests/filters/route.json index 8d8de8f65aef..05cedca67cca 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/route.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/route.json @@ -111,7 +111,7 @@ }, { "id": "7994", - "name": "Add route filter with miltiple actions", + "name": "Add route filter with multiple actions", "category": [ "filter", "route" --- base-commit: 8e929cb546ee42c9a61d24fae60605e9e3192354 change-id: 20241017-multiple_spell_error-8b267ffffe47 Best regards, -- Karan Sanghavi <karansanghvi98(a)gmail.com>

5 months, 3 weeks

2
1
0 0

[PATCH 0/2] kselftest/arm64: fp-stress signal delivery interval improvements

by Mark Brown

One of the things that fp-stress does to stress the floating point context switching is send signals to the test threads it spawns. Currently we do this once per second but as suggested by Mark Rutland if we increase this we can improve the chances of triggering any issues with context switching the signal handling code. Do a quick change to increase the rate of signal delivery, trying to avoid excessive impact on emulated platforms, and a further change to mitigate the impact that this creates during startup. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Mark Brown (2): kselftest/arm64: Increase frequency of signal delivery in fp-stress kselftest/arm64: Lower poll interval while waiting for fp-stress children tools/testing/selftests/arm64/fp/fp-stress.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) --- base-commit: 8e929cb546ee42c9a61d24fae60605e9e3192354 change-id: 20241028-arm64-fp-stress-interval-8f5e62c06e12 Best regards, -- Mark Brown <broonie(a)kernel.org>

5 months, 3 weeks

2
5
0 0

[PATCH bpf-next v2] bpf: handle implicit declaration of function gettid in bpf_iter.c

by Jason Xing

From: Jason Xing <kernelxing(a)tencent.com> As we can see from the title, when I compiled the selftests/bpf, I saw the error: implicit declaration of function ‘gettid’ ; did you mean ‘getgid’? [-Werror=implicit-function-declaration] skel->bss->tid = gettid(); ^~~~~~ getgid Directly call the syscall solves this issue. Signed-off-by: Jason Xing <kernelxing(a)tencent.com> --- v2 Link: https://lore.kernel.org/all/20241028034143.14675-1-kerneljasonxing@gmail.co… 1. directly call the syscall (Andrii) --- tools/testing/selftests/bpf/prog_tests/bpf_iter.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_iter.c b/tools/testing/selftests/bpf/prog_tests/bpf_iter.c index f0a3a9c18e9e..9006549a1294 100644 --- a/tools/testing/selftests/bpf/prog_tests/bpf_iter.c +++ b/tools/testing/selftests/bpf/prog_tests/bpf_iter.c @@ -226,7 +226,7 @@ static void test_task_common_nocheck(struct bpf_iter_attach_opts *opts, ASSERT_OK(pthread_create(&thread_id, NULL, &do_nothing_wait, NULL), "pthread_create"); - skel->bss->tid = gettid(); + skel->bss->tid = syscall(SYS_gettid); do_dummy_read_opts(skel->progs.dump_task, opts); @@ -255,10 +255,10 @@ static void *run_test_task_tid(void *arg) union bpf_iter_link_info linfo; int num_unknown_tid, num_known_tid; - ASSERT_NEQ(getpid(), gettid(), "check_new_thread_id"); + ASSERT_NEQ(getpid(), syscall(SYS_gettid), "check_new_thread_id"); memset(&linfo, 0, sizeof(linfo)); - linfo.task.tid = gettid(); + linfo.task.tid = syscall(SYS_gettid); opts.link_info = &linfo; opts.link_info_len = sizeof(linfo); test_task_common(&opts, 0, 1); -- 2.37.3

5 months, 3 weeks

3
2
0 0

[PATCH v4 0/5] implement lightweight guard pages

by Lorenzo Stoakes

Userland library functions such as allocators and threading implementations often require regions of memory to act as 'guard pages' - mappings which, when accessed, result in a fatal signal being sent to the accessing process. The current means by which these are implemented is via a PROT_NONE mmap() mapping, which provides the required semantics however incur an overhead of a VMA for each such region. With a great many processes and threads, this can rapidly add up and incur a significant memory penalty. It also has the added problem of preventing merges that might otherwise be permitted. This series takes a different approach - an idea suggested by Vlasimil Babka (and before him David Hildenbrand and Jann Horn - perhaps more - the provenance becomes a little tricky to ascertain after this - please forgive any omissions!) - rather than locating the guard pages at the VMA layer, instead placing them in page tables mapping the required ranges. Early testing of the prototype version of this code suggests a 5 times speed up in memory mapping invocations (in conjunction with use of process_madvise()) and a 13% reduction in VMAs on an entirely idle android system and unoptimised code. We expect with optimisation and a loaded system with a larger number of guard pages this could significantly increase, but in any case these numbers are encouraging. This way, rather than having separate VMAs specifying which parts of a range are guard pages, instead we have a VMA spanning the entire range of memory a user is permitted to access and including ranges which are to be 'guarded'. After mapping this, a user can specify which parts of the range should result in a fatal signal when accessed. By restricting the ability to specify guard pages to memory mapped by existing VMAs, we can rely on the mappings being torn down when the mappings are ultimately unmapped and everything works simply as if the memory were not faulted in, from the point of view of the containing VMAs. This mechanism in effect poisons memory ranges similar to hardware memory poisoning, only it is an entirely software-controlled form of poisoning. The mechanism is implemented via madvise() behaviour - MADV_GUARD_INSTALL which installs page table-level guard page markers - and MADV_GUARD_REMOVE - which clears them. Guard markers can be installed across multiple VMAs and any existing mappings will be cleared, that is zapped, before installing the guard page markers in the page tables. There is no concept of 'nested' guard markers, multiple attempts to install guard markers in a range will, after the first attempt, have no effect. Importantly, removing guard markers over a range that contains both guard markers and ordinary backed memory has no effect on anything but the guard markers (including leaving huge pages un-split), so a user can safely remove guard markers over a range of memory leaving the rest intact. The actual mechanism by which the page table entries are specified makes use of existing logic - PTE markers, which are used for the userfaultfd UFFDIO_POISON mechanism. Unfortunately PTE_MARKER_POISONED is not suited for the guard page mechanism as it results in VM_FAULT_HWPOISON semantics in the fault handler, so we add our own specific PTE_MARKER_GUARD and adapt existing logic to handle it. We also extend the generic page walk mechanism to allow for installation of PTEs (carefully restricted to memory management logic only to prevent unwanted abuse). We ensure that zapping performed by MADV_DONTNEED and MADV_FREE do not remove guard markers, nor does forking (except when VM_WIPEONFORK is specified for a VMA which implies a total removal of memory characteristics). It's important to note that the guard page implementation is emphatically NOT a security feature, so a user can remove the markers if they wish. We simply implement it in such a way as to provide the least surprising behaviour. An extensive set of self-tests are provided which ensure behaviour is as expected and additionally self-documents expected behaviour of guard ranges. Suggested-by: Vlastimil Babka <vbabka(a)suse.cz> Suggested-by: Jann Horn <jannh(a)google.com> Suggested-by: David Hildenbrand <david(a)redhat.com> v4 * Use restart_syscall() to implement -ERESTARTNOINTR to ensure correctly handled by kernel - tested this code path and confirmed it works correctly. Thanks to Vlastimil for pointing this issue out! * Updated the vector_madvise() handler to not unnecessarily invoke cond_resched() as suggested by Vlastimil. * Updated guard page tests to add a test for a vector operation which overwrites existing mappings. Tested this against the -ERESTARTNOINTR case and confirmed working. * Improved page walk logic further, refactoring handling logic as suggested by Vlastimil. * Moved MAX_MADVISE_GUARD_RETRIES to mm/madvise.c as suggested by Vlastimil. v3 * Cleaned up mm/pagewalk.c logic a bit to make things clearer, as suggested by Vlastiml. * Explicitly avoid splitting THP on PTE installation, as suggested by Vlastimil. Note this has no impact on the guard pages logic, which has page table entry handlers at PUD, PMD and PTE level. * Added WARN_ON_ONCE() to mm/hugetlb.c path where we don't expect a guard marker, as suggested by Vlastimil. * Reverted change to is_poisoned_swp_entry() to exclude guard pages which has the effect of MADV_FREE _not_ clearing guard pages. After discussion with Vlastimil, it became apparent that the ability to 'cancel' the freeing operation by writing to the mapping after having issued an MADV_FREE would mean that we would risk unexpected behaviour should the guard pages be removed, so we now do not remove markers here at all. * Added comment to PTE_MARKER_GUARD to highlight that memory tagged with the marker behaves as if it were a region mapped PROT_NONE, as highlighted by David. * Rename poison -> install, unpoison -> remove (i.e. MADV_GUARD_INSTALL / MADV_GUARD_REMOVE over MADV_GUARD_POISON / MADV_GUARD_REMOVE) at the request of David and John who both find the poison analogy confusing/overloaded. * After a lot of discussion, replace the looping behaviour should page faults race with guard page installation with a modest reattempt followed by returning -ERESTARTNOINTR to have the operation abort and re-enter, relieving lock contention and avoiding the possibility of allowing a malicious sandboxed process to impact the mmap lock or stall the overall process more than necessary, as suggested by Jann and Vlastimil having raised the issue. * Adjusted the page table walker so a populated huge PUD or PMD is correctly treated as being populated, necessitating a zap. In v2 we incorrectly skipped over these, which would cause the logic to wrongly proceed as if nothing were populated and the install succeeded. Instead, explicitly check to see if a huge page - if so, do not split but rather abort the operation and let zap take care of things. * Updated the guard remove logic to not unnecessarily split huge pages either. * Added a debug check to assert that the number of installed PTEs matches expectation, accounting for any existing guard pages. * Adapted vector_madvise() used by the process_madvise() system call to handle -ERESTARTNOINTR correctly. https://lore.kernel.org/all/cover.1729699916.git.lorenzo.stoakes@oracle.com/ v2 * The macros in kselftest_harness.h seem to be broken - __EXPECT() is terminated by '} while (0); OPTIONAL_HANDLER(_assert)' meaning it is not safe in single line if / else or for /which blocks, however working around this results in checkpatch producing invalid warnings, as reported by Shuah. * Fixing these macros is out of scope for this series, so compromise and instead rewrite test blocks so as to use multiple lines by separating out a decl in most cases. This has the side effect of, for the most part, making things more readable. * Heavily document the use of the volatile keyword - we can't avoid checkpatch complaining about this, so we explain it, as reported by Shuah. * Updated commit message to highlight that we skip tests we lack permissions for, as reported by Shuah. * Replaced a perror() with ksft_exit_fail_perror(), as reported by Shuah. * Added user friendly messages to cases where tests are skipped due to lack of permissions, as reported by Shuah. * Update the tool header to include the new MADV_GUARD_POISON/UNPOISON defines and directly include asm-generic/mman.h to get the platform-neutral versions to ensure we import them. * Finally fixed Vlastimil's email address in Suggested-by tags from suze to suse, as reported by Vlastimil. * Added linux-api to cc list, as reported by Vlastimil. https://lore.kernel.org/all/cover.1729440856.git.lorenzo.stoakes@oracle.com/ v1 * Un-RFC'd as appears no major objections to approach but rather debate on implementation. * Fixed issue with arches which need mmu_context.h and tlbfush.h. header imports in pagewalker logic to be able to use update_mmu_cache() as reported by the kernel test bot. * Added comments in page walker logic to clarify who can use ops->install_pte and why as well as adding a check_ops_valid() helper function, as suggested by Christoph. * Pass false in full parameter in pte_clear_not_present_full() as suggested by Jann. * Stopped erroneously requiring a write lock for the poison operation as suggested by Jann and Suren. * Moved anon_vma_prepare() to the start of madvise_guard_poison() to be consistent with how this is used elsewhere in the kernel as suggested by Jann. * Avoid returning -EAGAIN if we are raced on page faults, just keep looping and duck out if a fatal signal is pending or a conditional reschedule is needed, as suggested by Jann. * Avoid needlessly splitting huge PUDs and PMDs by specifying ACTION_CONTINUE, as suggested by Jann. https://lore.kernel.org/all/cover.1729196871.git.lorenzo.stoakes@oracle.com/ RFC https://lore.kernel.org/all/cover.1727440966.git.lorenzo.stoakes@oracle.com/ Lorenzo Stoakes (5): mm: pagewalk: add the ability to install PTEs mm: add PTE_MARKER_GUARD PTE marker mm: madvise: implement lightweight guard page mechanism tools: testing: update tools UAPI header for mman-common.h selftests/mm: add self tests for guard page feature arch/alpha/include/uapi/asm/mman.h | 3 + arch/mips/include/uapi/asm/mman.h | 3 + arch/parisc/include/uapi/asm/mman.h | 3 + arch/xtensa/include/uapi/asm/mman.h | 3 + include/linux/mm_inline.h | 2 +- include/linux/pagewalk.h | 18 +- include/linux/swapops.h | 24 +- include/uapi/asm-generic/mman-common.h | 3 + mm/hugetlb.c | 4 + mm/internal.h | 6 + mm/madvise.c | 239 ++++ mm/memory.c | 18 +- mm/mprotect.c | 6 +- mm/mseal.c | 1 + mm/pagewalk.c | 246 +++- tools/include/uapi/asm-generic/mman-common.h | 3 + tools/testing/selftests/mm/.gitignore | 1 + tools/testing/selftests/mm/Makefile | 1 + tools/testing/selftests/mm/guard-pages.c | 1243 ++++++++++++++++++ 19 files changed, 1751 insertions(+), 76 deletions(-) create mode 100644 tools/testing/selftests/mm/guard-pages.c -- 2.47.0

5 months, 3 weeks

3
8
0 0

[PATCH net-next v10 00/23] Introducing OpenVPN Data Channel Offload

by Antonio Quartulli

Notable changes from v9: * fixed potential deadlock between peer float and keepalive worker * simplified skb CB layout to avoid allocating large mem area per pkt * fixed double free along encryption/decryption error path * fixed crash due to race condition in keepalive worker for p2p mode * mitigated race condition between TCP socket init and first strp rcv * added CMD_OVPN_KEY_GET doit handler (it went missing in v9) * removed double 'select STREAM_PARSER' in Kconfig * removed double include of socket.h in io.c * sorted new OVPN section in MAINTAINERS alphabetically * sorted F: entries in MAINTAINERS alphabetically * switched to state "Supported" in MAINTAINERS * added ending newline to various error messages in ovpn-cli.c * rearranged ovpn-cli.c for better readability and maintenance * ovpn-cli.c now compiles with -Wextra -Wall -pedantic * renamed selftest scripts * test-float.sh is now a stub that just calls test.sh with appropriate params Please note that patches previously reviewed by Andrew Lunn have retained the Reviewed-by tag as they have been simply rebased without major modifications. The latest code can also be found at: https://github.com/OpenVPN/linux-kernel-ovpn Thanks a lot! Best Regards, Antonio Quartulli OpenVPN Inc. --- Antonio Quartulli (23): netlink: add NLA_POLICY_MAX_LEN macro net: introduce OpenVPN Data Channel Offload (ovpn) ovpn: add basic netlink support ovpn: add basic interface creation/destruction/management routines ovpn: keep carrier always on ovpn: introduce the ovpn_peer object ovpn: introduce the ovpn_socket object ovpn: implement basic TX path (UDP) ovpn: implement basic RX path (UDP) ovpn: implement packet processing ovpn: store tunnel and transport statistics ovpn: implement TCP transport ovpn: implement multi-peer support ovpn: implement peer lookup logic ovpn: implement keepalive mechanism ovpn: add support for updating local UDP endpoint ovpn: add support for peer floating ovpn: implement peer add/get/dump/delete via netlink ovpn: implement key add/get/del/swap via netlink ovpn: kill key and notify userspace in case of IV exhaustion ovpn: notify userspace when a peer is deleted ovpn: add basic ethtool support testing/selftests: add test tool and scripts for ovpn module Documentation/netlink/specs/ovpn.yaml | 362 +++ MAINTAINERS | 11 + drivers/net/Kconfig | 14 + drivers/net/Makefile | 1 + drivers/net/ovpn/Makefile | 22 + drivers/net/ovpn/bind.c | 54 + drivers/net/ovpn/bind.h | 117 + drivers/net/ovpn/crypto.c | 214 ++ drivers/net/ovpn/crypto.h | 145 ++ drivers/net/ovpn/crypto_aead.c | 386 ++++ drivers/net/ovpn/crypto_aead.h | 33 + drivers/net/ovpn/io.c | 462 ++++ drivers/net/ovpn/io.h | 25 + drivers/net/ovpn/main.c | 337 +++ drivers/net/ovpn/main.h | 24 + drivers/net/ovpn/netlink-gen.c | 212 ++ drivers/net/ovpn/netlink-gen.h | 41 + drivers/net/ovpn/netlink.c | 1135 ++++++++++ drivers/net/ovpn/netlink.h | 18 + drivers/net/ovpn/ovpnstruct.h | 61 + drivers/net/ovpn/packet.h | 40 + drivers/net/ovpn/peer.c | 1201 ++++++++++ drivers/net/ovpn/peer.h | 165 ++ drivers/net/ovpn/pktid.c | 130 ++ drivers/net/ovpn/pktid.h | 87 + drivers/net/ovpn/proto.h | 104 + drivers/net/ovpn/skb.h | 56 + drivers/net/ovpn/socket.c | 178 ++ drivers/net/ovpn/socket.h | 55 + drivers/net/ovpn/stats.c | 21 + drivers/net/ovpn/stats.h | 47 + drivers/net/ovpn/tcp.c | 506 +++++ drivers/net/ovpn/tcp.h | 44 + drivers/net/ovpn/udp.c | 406 ++++ drivers/net/ovpn/udp.h | 26 + include/net/netlink.h | 1 + include/uapi/linux/if_link.h | 15 + include/uapi/linux/ovpn.h | 109 + include/uapi/linux/udp.h | 1 + tools/net/ynl/ynl-gen-c.py | 4 +- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 + tools/testing/selftests/net/ovpn/config | 10 + tools/testing/selftests/net/ovpn/data64.key | 5 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 2370 ++++++++++++++++++++ tools/testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/test-chachapoly.sh | 9 + tools/testing/selftests/net/ovpn/test-float.sh | 9 + tools/testing/selftests/net/ovpn/test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/test.sh | 183 ++ tools/testing/selftests/net/ovpn/udp_peers.txt | 5 + 52 files changed, 9494 insertions(+), 1 deletion(-) --- base-commit: 03fc07a24735e0be8646563913abf5f5cb71ad19 change-id: 20241002-b4-ovpn-eeee35c694a2 Best regards, -- Antonio Quartulli <antonio(a)openvpn.net>

5 months, 3 weeks

4
30
0 0

[PATCH net-next 1/2] net: netconsole: selftests: Change the IP subnet

by Breno Leitao

Use a less populated IP range to run the tests, as suggested by Petr in Link: https://lore.kernel.org/netdev/87ikvukv3s.fsf@nvidia.com/. Suggested-by: Petr Machata <petrm(a)nvidia.com> Signed-off-by: Breno Leitao <leitao(a)debian.org> --- tools/testing/selftests/drivers/net/netcons_basic.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/net/netcons_basic.sh b/tools/testing/selftests/drivers/net/netcons_basic.sh index 06021b2059b7..4ad1e216c6b0 100755 --- a/tools/testing/selftests/drivers/net/netcons_basic.sh +++ b/tools/testing/selftests/drivers/net/netcons_basic.sh @@ -20,9 +20,9 @@ SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") # Simple script to test dynamic targets in netconsole SRCIF="" # to be populated later -SRCIP=192.168.1.1 +SRCIP=192.168.2.1 DSTIF="" # to be populated later -DSTIP=192.168.1.2 +DSTIP=192.168.2.2 PORT="6666" MSG="netconsole selftest" -- 2.43.5

5 months, 3 weeks

2
3
0 0

kselftest/next kselftest-lkdtm: 1 runs, 1 regressions (v6.12-rc3-8-gcecc795329fc)

by kernelci.org bot

kselftest/next kselftest-lkdtm: 1 runs, 1 regressions (v6.12-rc3-8-gcecc795329fc) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.12-rc3-8-gcec… Test: kselftest-lkdtm Tree: kselftest Branch: next Describe: v6.12-rc3-8-gcecc795329fc URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: cecc795329fc3e0ea2e84567ee57570cc050cf6b Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/6720a2196a6ed469cec8688c Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-12 (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/next/v6.12-rc3-8-gcecc795329fc/arm/… HTML log: https://storage.kernelci.org//kselftest/next/v6.12-rc3-8-gcecc795329fc/arm/… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-lkdtm.login: https://kernelci.org/test/case/id/6720a2196a6ed469cec8688d failing since 91 days (last pass: v6.10-rc7-29-gdf09b0bb09ea, first fail: v6.11-rc1)

5 months, 3 weeks

1
0
0 0

kselftest/next kselftest-lib: 1 runs, 1 regressions (v6.12-rc3-8-gcecc795329fc)

by kernelci.org bot

kselftest/next kselftest-lib: 1 runs, 1 regressions (v6.12-rc3-8-gcecc795329fc) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.12-rc3-8-gcec… Test: kselftest-lib Tree: kselftest Branch: next Describe: v6.12-rc3-8-gcecc795329fc URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: cecc795329fc3e0ea2e84567ee57570cc050cf6b Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/6720a485c2f02871e7c86857 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-12 (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/next/v6.12-rc3-8-gcecc795329fc/arm/… HTML log: https://storage.kernelci.org//kselftest/next/v6.12-rc3-8-gcecc795329fc/arm/… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-lib.login: https://kernelci.org/test/case/id/6720a485c2f02871e7c86858 failing since 91 days (last pass: v6.10-rc7-29-gdf09b0bb09ea, first fail: v6.11-rc1)

5 months, 3 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror October 2024