September 2023 - Linux-kselftest-mirror

by Naresh Kamboju

Following kernel warnings and crash notices on arm64 Rpi4 device while running selftests: gpio on Linux mainline 6.3.0-rc1 kernel and Linux next. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> Please refer to test log links for detailed test plan and kernel crash logs. It is reproducible on arm64 juno-r2, Rpi4 and Qualcomm dragonboard 410c and qemu-arm64. Test log: ----------- kselftest: Running tests in gpio TAP version 13 1..2 # selftests: gpio: gpio-mockup.sh # 1. Module load tests [ 61.176149] ============================================================================= [ 61.176802] [ 61.176807] ====================================================== [ 61.176809] WARNING: possible circular locking dependency detected [ 61.176811] 6.3.0-rc1-next-20230307 #1 Not tainted [ 61.176814] ------------------------------------------------------ [ 61.176816] modprobe/510 is trying to acquire lock: [ 61.176818] ffff80000b2284e8 (console_owner){..-.}-{0:0}, at: console_flush_all (kernel/printk/printk.c:2879 kernel/printk/printk.c:2942) [ 61.176846] [ 61.176846] but task is already holding lock: [ 61.176848] ffff000040000698 (&n->list_lock){-.-.}-{2:2}, at: get_partial_node.part.0 (mm/slub.c:2271) [ 61.176861] [ 61.176861] which lock already depends on the new lock. [ 61.176861] [ 61.176863] [ 61.176863] the existing dependency chain (in reverse order) is: [ 61.176864] [ 61.176864] -> #2 (&n->list_lock){-.-.}-{2:2}: [ 61.176871] lock_acquire (kernel/locking/lockdep.c:5673) [ 61.176879] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 61.176885] get_partial_node.part.0 (mm/slub.c:2271) [ 61.176890] ___slab_alloc (mm/slub.c:2268 mm/slub.c:2386 mm/slub.c:3188) [ 61.176894] __slab_alloc.constprop.0 (mm/slub.c:3292) [ 61.176899] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 61.176903] __kmalloc (mm/slab_common.c:968 mm/slab_common.c:980) [ 61.176908] tty_buffer_alloc (drivers/tty/tty_buffer.c:182) [ 61.176914] __tty_buffer_request_room (drivers/tty/tty_buffer.c:279) [ 61.176919] __tty_insert_flip_char (drivers/tty/tty_buffer.c:398) [ 61.176924] uart_insert_char (drivers/tty/serial/serial_core.c:3341) [ 61.176929] pl011_fifo_to_tty.isra.0 (drivers/tty/serial/amba-pl011.c:314) [ 61.176934] pl011_int (include/linux/spinlock.h:390 drivers/tty/serial/amba-pl011.c:1396 drivers/tty/serial/amba-pl011.c:1571) [ 61.176937] __handle_irq_event_percpu (kernel/irq/handle.c:158) [ 61.176941] handle_irq_event (kernel/irq/handle.c:193 kernel/irq/handle.c:210) [ 61.176944] handle_fasteoi_irq (kernel/irq/chip.c:716) [ 61.176950] generic_handle_domain_irq (kernel/irq/irqdesc.c:652 kernel/irq/irqdesc.c:707) [ 61.176953] gic_handle_irq (arch/arm64/include/asm/io.h:75 include/asm-generic/io.h:335 drivers/irqchip/irq-gic.c:344) [ 61.176958] call_on_irq_stack (arch/arm64/kernel/entry.S:905) [ 61.176962] do_interrupt_handler (arch/arm64/kernel/entry-common.c:274) [ 61.176968] el1_interrupt (arch/arm64/kernel/entry-common.c:472 arch/arm64/kernel/entry-common.c:486) [ 61.176971] el1h_64_irq_handler (arch/arm64/kernel/entry-common.c:492) [ 61.176975] el1h_64_irq (arch/arm64/kernel/entry.S:587) [ 61.176978] __kmem_cache_alloc_node (mm/slub.c:3490) [ 61.176983] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 61.176986] inet6_dump_fib (net/ipv6/ip6_fib.c:657) [ 61.176991] rtnl_dump_all (net/core/rtnetlink.c:3964) [ 61.176997] netlink_dump (net/netlink/af_netlink.c:2296) [ 61.177004] netlink_recvmsg (net/netlink/af_netlink.c:2024) [ 61.177009] ____sys_recvmsg (net/socket.c:1015 net/socket.c:1036 net/socket.c:2723) [ 61.177014] ___sys_recvmsg (net/socket.c:2765) [ 61.177019] __sys_recvmsg (include/linux/file.h:31 net/socket.c:2797) [ 61.177025] __arm64_sys_recvmsg (net/socket.c:2802) [ 61.177030] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 61.177037] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 61.177043] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 61.177049] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 61.177052] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 61.177055] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 61.177058] [ 61.177058] -> #1 (&port_lock_key){-.-.}-{2:2}: [ 61.177065] lock_acquire (kernel/locking/lockdep.c:5673) [ 61.177071] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 61.177074] serial8250_console_write (drivers/tty/serial/8250/8250_port.c:3394) [ 61.177082] univ8250_console_write (drivers/tty/serial/8250/8250_core.c:585) [ 61.177087] console_flush_all (kernel/printk/printk.c:2888 kernel/printk/printk.c:2942) [ 61.177093] console_unlock.part.0 (kernel/printk/printk.c:3017) [ 61.177098] vprintk_emit (kernel/printk/printk.c:2317) [ 61.177104] vprintk_default (kernel/printk/printk.c:2328) [ 61.177110] vprintk (kernel/printk/printk_safe.c:50) [ 61.177116] _printk (kernel/printk/printk.c:2341) [ 61.177121] register_console (kernel/printk/printk.c:3468) [ 61.177126] uart_add_one_port (drivers/tty/serial/serial_core.c:2579 drivers/tty/serial/serial_core.c:3100) [ 61.177130] serial8250_register_8250_port (drivers/tty/serial/8250/8250_core.c:1093) [ 61.177135] bcm2835aux_serial_probe (drivers/tty/serial/8250/8250_bcm2835aux.c:184) [ 61.177141] platform_probe (drivers/base/platform.c:1405) [ 61.177148] really_probe (drivers/base/dd.c:552 drivers/base/dd.c:631) [ 61.177152] __driver_probe_device (drivers/base/dd.c:768) [ 61.177157] driver_probe_device (drivers/base/dd.c:798) [ 61.177161] __driver_attach (drivers/base/dd.c:1185) [ 61.177166] bus_for_each_dev (drivers/base/bus.c:368) [ 61.177170] driver_attach (drivers/base/dd.c:1202) [ 61.177173] bus_add_driver (drivers/base/bus.c:673) [ 61.177177] driver_register (drivers/base/driver.c:246) [ 61.177182] __platform_driver_register (drivers/base/platform.c:868) [ 61.177188] bcm2835aux_serial_driver_init (drivers/tty/serial/8250/8250_bcm2835aux.c:233) [ 61.177195] do_one_initcall (init/main.c:1306) [ 61.177199] kernel_init_freeable (init/main.c:1378 init/main.c:1395 init/main.c:1414 init/main.c:1634) [ 61.177207] kernel_init (init/main.c:1524) [ 61.177212] ret_from_fork (arch/arm64/kernel/entry.S:871) [ 61.177216] [ 61.177216] -> #0 (console_owner){..-.}-{0:0}: [ 61.177222] __lock_acquire (kernel/locking/lockdep.c:3099 kernel/locking/lockdep.c:3217 kernel/locking/lockdep.c:3832 kernel/locking/lockdep.c:5056) [ 61.177228] lock_acquire.part.0 (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5671) [ 61.177233] lock_acquire (kernel/locking/lockdep.c:5673) [ 61.177238] console_flush_all (kernel/printk/printk.c:2883 kernel/printk/printk.c:2942) [ 61.177244] console_unlock.part.0 (kernel/printk/printk.c:3017) [ 61.177250] vprintk_emit (kernel/printk/printk.c:2317) [ 61.177255] vprintk_default (kernel/printk/printk.c:2328) [ 61.177261] vprintk (kernel/printk/printk_safe.c:50) [ 61.177267] _printk (kernel/printk/printk.c:2341) [ 61.177271] slab_bug (mm/slub.c:892) [ 61.177274] check_bytes_and_report (mm/slub.c:1054) [ 61.177279] check_object (mm/slub.c:1196 (discriminator 2)) [ 61.177283] alloc_debug_processing (mm/slub.c:1415 mm/slub.c:1425) [ 61.177287] get_partial_node.part.0 (mm/slub.c:2146 mm/slub.c:2279) [ 61.177291] ___slab_alloc (mm/slub.c:2268 mm/slub.c:2386 mm/slub.c:3188) [ 61.177295] __slab_alloc.constprop.0 (mm/slub.c:3292) [ 61.177300] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 61.177304] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 61.177308] device_add (drivers/base/core.c:3436 drivers/base/core.c:3486) [ 61.177311] platform_device_add (drivers/base/platform.c:717) [ 61.177317] platform_device_register_full (drivers/base/platform.c:844) [ 61.177323] gpio_mockup_register_chip+0x1ec/0x2b8 gpio_mockup [ 61.177342] gpio_mockup_init+0xf0/0xd40 gpio_mockup [ 61.177352] do_one_initcall (init/main.c:1306) [ 61.177356] do_init_module (kernel/module/main.c:2457) [ 61.177363] load_module (kernel/module/main.c:2859) [ 61.177369] __do_sys_finit_module (kernel/module/main.c:2961) [ 61.177375] __arm64_sys_finit_module (kernel/module/main.c:2928) [ 61.177381] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 61.177387] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 61.177393] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 61.177398] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 61.177402] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 61.177405] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 61.177408] [ 61.177408] other info that might help us debug this: [ 61.177408] [ 61.177410] Chain exists of: [ 61.177410] console_owner --> &port_lock_key --> &n->list_lock [ 61.177410] [ 61.177417] Possible unsafe locking scenario: [ 61.177417] [ 61.177418] CPU0 CPU1 [ 61.177419] ---- ---- [ 61.177420] lock(&n->list_lock); [ 61.177423] lock(&port_lock_key); [ 61.177426] lock(&n->list_lock); [ 61.177429] lock(console_owner); [ 61.177432] [ 61.177432] *** DEADLOCK *** [ 61.177432] [ 61.177434] 3 locks held by modprobe/510: [ 61.177436] #0: ffff000040000698 (&n->list_lock){-.-.}-{2:2}, at: get_partial_node.part.0 (mm/slub.c:2271) [ 61.177448] #1: ffff80000b227f18 (console_lock){+.+.}-{0:0}, at: vprintk_emit (kernel/printk/printk.c:1936 kernel/printk/printk.c:2315) [ 61.177460] #2: ffff80000b228388 (console_srcu){....}-{0:0}, at: console_flush_all (include/linux/srcu.h:200 kernel/printk/printk.c:290 kernel/printk/printk.c:2934) [ 61.177471] [ 61.177471] stack backtrace: [ 61.177474] CPU: 3 PID: 510 Comm: modprobe Not tainted 6.3.0-rc1-next-20230307 #1 [ 61.177479] Hardware name: Raspberry Pi 4 Model B (DT) [ 61.177482] Call trace: [ 61.177483] dump_backtrace (arch/arm64/kernel/stacktrace.c:160) [ 61.177487] show_stack (arch/arm64/kernel/stacktrace.c:167) [ 61.177490] dump_stack_lvl (lib/dump_stack.c:107) [ 61.177498] dump_stack (lib/dump_stack.c:114) [ 61.177504] print_circular_bug (kernel/locking/lockdep.c:2057) [ 61.177509] check_noncircular (kernel/locking/lockdep.c:2181) [ 61.177514] __lock_acquire (kernel/locking/lockdep.c:3099 kernel/locking/lockdep.c:3217 kernel/locking/lockdep.c:3832 kernel/locking/lockdep.c:5056) [ 61.177520] lock_acquire.part.0 (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5671) [ 61.177525] lock_acquire (kernel/locking/lockdep.c:5673) [ 61.177530] console_flush_all (kernel/printk/printk.c:2883 kernel/printk/printk.c:2942) [ 61.177536] console_unlock.part.0 (kernel/printk/printk.c:3017) [ 61.177542] vprintk_emit (kernel/printk/printk.c:2317) [ 61.177547] vprintk_default (kernel/printk/printk.c:2328) [ 61.177553] vprintk (kernel/printk/printk_safe.c:50) [ 61.177559] _printk (kernel/printk/printk.c:2341) [ 61.177564] slab_bug (mm/slub.c:892) [ 61.177567] check_bytes_and_report (mm/slub.c:1054) [ 61.177571] check_object (mm/slub.c:1196 (discriminator 2)) [ 61.177575] alloc_debug_processing (mm/slub.c:1415 mm/slub.c:1425) [ 61.177579] get_partial_node.part.0 (mm/slub.c:2146 mm/slub.c:2279) [ 61.177583] ___slab_alloc (mm/slub.c:2268 mm/slub.c:2386 mm/slub.c:3188) [ 61.177587] __slab_alloc.constprop.0 (mm/slub.c:3292) [ 61.177592] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 61.177596] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 61.177600] device_add (drivers/base/core.c:3436 drivers/base/core.c:3486) [ 61.177603] platform_device_add (drivers/base/platform.c:717) [ 61.177609] platform_device_register_full (drivers/base/platform.c:844) [ 61.177615] gpio_mockup_register_chip+0x1ec/0x2b8 gpio_mockup [ 61.177625] gpio_mockup_init+0xf0/0xd40 gpio_mockup [ 61.177634] do_one_initcall (init/main.c:1306) [ 61.177638] do_init_module (kernel/module/main.c:2457) [ 61.177644] load_module (kernel/module/main.c:2859) [ 61.177650] __do_sys_finit_module (kernel/module/main.c:2961) [ 61.177656] __arm64_sys_finit_module (kernel/module/main.c:2928) [ 61.177662] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 61.177668] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 61.177674] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 61.177680] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 61.177683] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 61.177686] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 62.011685] BUG kmalloc-512 (Not tainted): Poison overwritten [ 62.017513] ----------------------------------------------------------------------------- [ 62.017513] [ 62.027300] 0xffff00004ecb7a38-0xffff00004ecb7a47 @offset=31288. First byte 0x6a instead of 0x6b [ 62.036210] Allocated in swnode_register+0x40/0x218 age=808 cpu=3 pid=386 [ 62.043101] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 62.047784] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 62.051406] swnode_register (drivers/base/swnode.c:776) [ 62.055293] fwnode_create_software_node (drivers/base/swnode.c:934 (discriminator 4)) [ 62.060238] gpio_mockup_register_chip+0x1c4/0x2b8 gpio_mockup [ 62.066337] gpio_mockup_init+0xf0/0xd40 gpio_mockup [ 62.071551] do_one_initcall (init/main.c:1306) [ 62.075437] do_init_module (kernel/module/main.c:2457) [ 62.079238] load_module (kernel/module/main.c:2859) [ 62.083037] __do_sys_finit_module (kernel/module/main.c:2961) [ 62.087455] __arm64_sys_finit_module (kernel/module/main.c:2928) [ 62.092048] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 62.095848] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 62.100793] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 62.104151] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 62.107244] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 62.111570] Freed in software_node_release+0xdc/0x108 age=632 cpu=0 pid=428 [ 62.118633] __kmem_cache_free (mm/slub.c:3732 mm/slub.c:3788 mm/slub.c:3800) [ 62.122784] kfree (mm/slab_common.c:1020) [ 62.125788] software_node_release (drivers/base/swnode.c:761) [ 62.130204] kobject_put (lib/kobject.c:685 lib/kobject.c:712 include/linux/kref.h:65 lib/kobject.c:729) [ 62.133739] software_node_notify_remove (drivers/base/swnode.c:1093) [ 62.138597] device_del (drivers/base/core.c:2265 drivers/base/core.c:3778) [ 62.142134] platform_device_del.part.0 (drivers/base/platform.c:753) [ 62.146903] platform_device_unregister (drivers/base/platform.c:551 drivers/base/platform.c:794) [ 62.151672] gpio_mockup_exit+0x54/0x280 gpio_mockup [ 62.156888] __arm64_sys_delete_module (kernel/module/main.c:756 kernel/module/main.c:698 kernel/module/main.c:698) [ 62.161745] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 62.165545] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 62.170490] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 62.173850] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 62.176941] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 62.181267] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 62.184975] Slab 0xfffffc00013b2c00 objects=21 used=7 fp=0xffff00004ecb7400 flags=0x7fffc0000010200(slab|head|node=0|zone=1|lastcpupid=0xffff) [ 62.197943] Object 0xffff00004ecb7a00 @offset=31232 fp=0xffff00004ecb7400 [ 62.197943] [ 62.206325] Redzone ffff00004ecb7800: ... [ 63.089597] CPU: 3 PID: 510 Comm: modprobe Not tainted 6.3.0-rc1-next-20230307 #1 [ 63.097186] Hardware name: Raspberry Pi 4 Model B (DT) [ 63.102392] Call trace: [ 63.104865] dump_backtrace (arch/arm64/kernel/stacktrace.c:160) [ 63.108665] show_stack (arch/arm64/kernel/stacktrace.c:167) [ 63.112021] dump_stack_lvl (lib/dump_stack.c:107) [ 63.115734] dump_stack (lib/dump_stack.c:114) [ 63.119093] print_trailer (mm/slub.c:953) [ 63.122892] check_bytes_and_report (mm/slub.c:1058) [ 63.127395] check_object (mm/slub.c:1196 (discriminator 2)) [ 63.131104] alloc_debug_processing (mm/slub.c:1415 mm/slub.c:1425) [ 63.135606] get_partial_node.part.0 (mm/slub.c:2146 mm/slub.c:2279) [ 63.140286] ___slab_alloc (mm/slub.c:2268 mm/slub.c:2386 mm/slub.c:3188) [ 63.144084] __slab_alloc.constprop.0 (mm/slub.c:3292) [ 63.148674] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 63.153354] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 63.156974] device_add (drivers/base/core.c:3436 drivers/base/core.c:3486) [ 63.160508] platform_device_add (drivers/base/platform.c:717) [ 63.164837] platform_device_register_full (drivers/base/platform.c:844) [ 63.169959] gpio_mockup_register_chip+0x1ec/0x2b8 gpio_mockup [ 63.176057] gpio_mockup_init+0xf0/0xd40 gpio_mockup [ 63.181269] do_one_initcall (init/main.c:1306) [ 63.185155] do_init_module (kernel/module/main.c:2457) [ 63.188956] load_module (kernel/module/main.c:2859) [ 63.192755] __do_sys_finit_module (kernel/module/main.c:2961) [ 63.197171] __arm64_sys_finit_module (kernel/module/main.c:2928) [ 63.201765] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 63.205565] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 63.210510] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 63.213869] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 63.216961] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 63.221287] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 63.224998] FIX kmalloc-512: Restoring Poison 0xffff00004ecb7a38-0xffff00004ecb7a47=0x6b [ 63.233202] FIX kmalloc-512: Marking all objects used [ 63.399213] ============================================================================= links to the crash: - https://lkft.validation.linaro.org/scheduler/job/6224830#L1291 - https://lkft.validation.linaro.org/scheduler/job/6224742#L1202 - https://lkft.validation.linaro.org/scheduler/job/6224784#L3415 - https://lkft.validation.linaro.org/scheduler/job/6224810#L2029 metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git_sha: 709c6adf19dc558e44ab5c01659b09a16a2d3c82 git_describe: next-20230307 kernel_version: 6.3.0-rc1 kernel-config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2MfXESbRAbSUj9oic6d8… build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/798095907 artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2MfXESbRAbSUj9oic6d8… toolchain: gcc-11 -- Linaro LKFT https://lkft.linaro.org

1 year, 1 month

5
8
0 0

[PATCH v6] selftests: rtc: Fixes rtctest error handling.

by Atul Kumar Pant

Adds a check to verify if the rtc device file is valid or not and prints a useful error message if the file is not accessible. Signed-off-by: Atul Kumar Pant <atulpant.linux(a)gmail.com> --- changes since v5: Updated error message to use strerror(). If the rtc file is invalid, the skip the test. changes since v4: Updated the commit message. changes since v3: Added Linux-kselftest and Linux-kernel mailing lists. changes since v2: Changed error message when rtc file does not exist. changes since v1: Removed check for uid=0 If rtc file is invalid, then exit the test. tools/testing/selftests/rtc/rtctest.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c index 630fef735c7e..27b466111885 100644 --- a/tools/testing/selftests/rtc/rtctest.c +++ b/tools/testing/selftests/rtc/rtctest.c @@ -15,6 +15,7 @@ #include <sys/types.h> #include <time.h> #include <unistd.h> +#include <error.h> #include "../kselftest_harness.h" #include "../kselftest.h" @@ -437,7 +438,7 @@ int main(int argc, char **argv) if (access(rtc_file, F_OK) == 0) ret = test_harness_run(argc, argv); else - ksft_exit_fail_msg("[ERROR]: Cannot access rtc file %s - Exiting\n", rtc_file); + ksft_exit_skip("%s: %s\n", rtc_file, strerror(errno)); return ret; } -- 2.25.1

1 year, 1 month

2
4
0 0

[PATCH] selftests: sud_test: return correct emulated syscall value on RISC-V

by Clément Léger

Currently, the sud_test expects the emulated syscall to return the emulated syscall number. This assumption only works on architectures were the syscall calling convention use the same register for syscall number/syscall return value. This is not the case for RISC-V and thus the return value must be also emulated using the provided ucontext. Signed-off-by: Clément Léger <cleger(a)rivosinc.com> --- tools/testing/selftests/syscall_user_dispatch/sud_test.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_test.c b/tools/testing/selftests/syscall_user_dispatch/sud_test.c index b5d592d4099e..1b5553c19700 100644 --- a/tools/testing/selftests/syscall_user_dispatch/sud_test.c +++ b/tools/testing/selftests/syscall_user_dispatch/sud_test.c @@ -158,6 +158,14 @@ static void handle_sigsys(int sig, siginfo_t *info, void *ucontext) /* In preparation for sigreturn. */ SYSCALL_DISPATCH_OFF(glob_sel); + + /* + * Modify interrupted context returned value according to syscall + * calling convention + */ +#if defined(__riscv) + ((ucontext_t*)ucontext)->uc_mcontext.__gregs[REG_A0] = MAGIC_SYSCALL_1; +#endif } TEST(dispatch_and_return) -- 2.40.1

1 year, 1 month

2
3
0 0

[PATCH v33 0/6] Implement IOCTL to get and optionally clear info about PTEs

by Muhammad Usama Anjum

*Changes in v33*: - Add PAGE_IS_FILE support for THPs *Changes in v31 and v32*: - Minor updates *Changes in v30*: - Rebase on top of next-20230815 - Minor nitpicks *Changes in v29:* - Polish IOCTL and improve documentation *Changes in v28:* - Fix walk_end and add 17 test cases in selftests patch *Changes in v27:* - Handle review comments and minor improvements - Add performance improvement patch on top with test for easy review *Changes in v26:* - Code re-structurring and API changes in PAGEMAP_IOCTL *Changes in v25*: - Do proper filtering on hole as well (hole got missed earlier) *Changes in v24*: - Rebase on top of next-20230710 - Place WP markers in case of hole as well *Changes in v23*: - Set vec_buf_index in loop only when vec_buf_index is set - Return -EFAULT instead of -EINVAL if vec is NULL - Correctly return the walk ending address to the page granularity *Changes in v22*: - Interface change: - Replace [start start + len) with [start, end) - Return the ending address of the address walk in start *Changes in v21*: - Abort walk instead of returning error if WP is to be performed on partial hugetlb *Changes in v20* - Correct PAGE_IS_FILE and add PAGE_IS_PFNZERO *Changes in v19* - Minor changes and interface updates *Changes in v18* - Rebase on top of next-20230613 - Minor updates *Changes in v17* - Rebase on top of next-20230606 - Minor improvements in PAGEMAP_SCAN IOCTL patch *Changes in v16* - Fix a corner case - Add exclusive PM_SCAN_OP_WP back *Changes in v15* - Build fix (Add missed build fix in RESEND) *Changes in v14* - Fix build error caused by #ifdef added at last minute in some configs *Changes in v13* - Rebase on top of next-20230414 - Give-up on using uffd_wp_range() and write new helpers, flush tlb only once *Changes in v12* - Update and other memory types to UFFD_FEATURE_WP_ASYNC - Rebaase on top of next-20230406 - Review updates *Changes in v11* - Rebase on top of next-20230307 - Base patches on UFFD_FEATURE_WP_UNPOPULATED - Do a lot of cosmetic changes and review updates - Remove ENGAGE_WP + !GET operation as it can be performed with UFFDIO_WRITEPROTECT *Changes in v10* - Add specific condition to return error if hugetlb is used with wp async - Move changes in tools/include/uapi/linux/fs.h to separate patch - Add documentation *Changes in v9:* - Correct fault resolution for userfaultfd wp async - Fix build warnings and errors which were happening on some configs - Simplify pagemap ioctl's code *Changes in v8:* - Update uffd async wp implementation - Improve PAGEMAP_IOCTL implementation *Changes in v7:* - Add uffd wp async - Update the IOCTL to use uffd under the hood instead of soft-dirty flags *Motivation* The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch() retrieves the addresses of the pages that are written to in a region of virtual memory. This syscall is used in Windows applications and games etc. This syscall is being emulated in pretty slow manner in userspace. Our purpose is to enhance the kernel such that we translate it efficiently in a better way. Currently some out of tree hack patches are being used to efficiently emulate it in some kernels. We intend to replace those with these patches. So the whole gaming on Linux can effectively get benefit from this. It means there would be tons of users of this code. CRIU use case [2] was mentioned by Andrei and Danylo: > Use cases for migrating sparse VMAs are binaries sanitized with ASAN, > MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of > shadow memory [4]. Being able to migrate such binaries allows to highly > reduce the amount of work needed to identify and fix post-migration > crashes, which happen constantly. Andrei's defines the following uses of this code: * it is more granular and allows us to track changed pages more effectively. The current interface can clear dirty bits for the entire process only. In addition, reading info about pages is a separate operation. It means we must freeze the process to read information about all its pages, reset dirty bits, only then we can start dumping pages. The information about pages becomes more and more outdated, while we are processing pages. The new interface solves both these downsides. First, it allows us to read pte bits and clear the soft-dirty bit atomically. It means that CRIU will not need to freeze processes to pre-dump their memory. Second, it clears soft-dirty bits for a specified region of memory. It means CRIU will have actual info about pages to the moment of dumping them. * The new interface has to be much faster because basic page filtering is happening in the kernel. With the old interface, we have to read pagemap for each page. *Implementation Evolution (Short Summary)* From the definition of GetWriteWatch(), we feel like kernel's soft-dirty feature can be used under the hood with some additions like: * reset soft-dirty flag for only a specific region of memory instead of clearing the flag for the entire process * get and clear soft-dirty flag for a specific region atomically So we decided to use ioctl on pagemap file to read or/and reset soft-dirty flag. But using soft-dirty flag, sometimes we get extra pages which weren't even written. They had become soft-dirty because of VMA merging and VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were able to by-pass this short coming by ignoring VM_SOFTDIRTY until David reported that mprotect etc messes up the soft-dirty flag while ignoring VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We discussed if we can revert these patches. But we could not reach to any conclusion. So at this point, I made couple of tries to solve this whole VM_SOFTDIRTY issue by correcting the soft-dirty implementation: * [7] Correct the bug fixed wrongly back in 2014. It had potential to cause regression. We left it behind. * [8] Keep a list of soft-dirty part of a VMA across splits and merges. I got the reply don't increase the size of the VMA by 8 bytes. At this point, we left soft-dirty considering it is too much delicate and userfaultfd [9] seemed like the only way forward. From there onward, we have been basing soft-dirty emulation on userfaultfd wp feature where kernel resolves the faults itself when WP_ASYNC feature is used. It was straight forward to add WP_ASYNC feature in userfautlfd. Now we get only those pages dirty or written-to which are really written in reality. (PS There is another WP_UNPOPULATED userfautfd feature is required which is needed to avoid pre-faulting memory before write-protecting [9].) All the different masks were added on the request of CRIU devs to create interface more generic and better. [1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-… [2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com [3] https://github.com/google/sanitizers [4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit [5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com [6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/ [7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.… [8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.… [9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com [10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com * Original Cover letter from v8* Hello, Note: Soft-dirty pages and pages which have been written-to are synonyms. As kernel already has soft-dirty feature inside which we have given up to use, we are using written-to terminology while using UFFD async WP under the hood. It is possible to find and clear soft-dirty pages entirely in userspace. But it isn't efficient: - The mprotect and SIGSEGV handler for bookkeeping - The userfaultfd wp (synchronous) with the handler for bookkeeping Some benchmarks can be seen here[1]. This series adds features that weren't present earlier: - There is no atomic get soft-dirty/Written-to status and clear present in the kernel. - The pages which have been written-to can not be found in accurate way. (Kernel's soft-dirty PTE bit + sof_dirty VMA bit shows more soft-dirty pages than there actually are.) Historically, soft-dirty PTE bit tracking has been used in the CRIU project. The procfs interface is enough for finding the soft-dirty bit status and clearing the soft-dirty bit of all the pages of a process. We have the use case where we need to track the soft-dirty PTE bit for only specific pages on-demand. We need this tracking and clear mechanism of a region of memory while the process is running to emulate the getWriteWatch() syscall of Windows. *(Moved to using UFFD instead of soft-dirty feature to find pages which have been written-to from v7 patch series)*: Stop using the soft-dirty flags for finding which pages have been written to. It is too delicate and wrong as it shows more soft-dirty pages than the actual soft-dirty pages. There is no interest in correcting it [2][3] as this is how the feature was written years ago. It shouldn't be updated to changed behaviour. Peter Xu has suggested using the async version of the UFFD WP [4] as it is based inherently on the PTEs. So in this patch series, I've added a new mode to the UFFD which is asynchronous version of the write protect. When this variant of the UFFD WP is used, the page faults are resolved automatically by the kernel. The pages which have been written-to can be found by reading pagemap file (!PM_UFFD_WP). This feature can be used successfully to find which pages have been written to from the time the pages were write protected. This works just like the soft-dirty flag without showing any extra pages which aren't soft-dirty in reality. The information related to pages if the page is file mapped, present and swapped is required for the CRIU project [5][6]. The addition of the required mask, any mask, excluded mask and return masks are also required for the CRIU project [5]. The IOCTL returns the addresses of the pages which match the specific masks. The page addresses are returned in struct page_region in a compact form. The max_pages is needed to support a use case where user only wants to get a specific number of pages. So there is no need to find all the pages of interest in the range when max_pages is specified. The IOCTL returns when the maximum number of the pages are found. The max_pages is optional. If max_pages is specified, it must be equal or greater than the vec_size. This restriction is needed to handle worse case when one page_region only contains info of one page and it cannot be compacted. This is needed to emulate the Windows getWriteWatch() syscall. The patch series include the detailed selftest which can be used as an example for the uffd async wp test and PAGEMAP_IOCTL. It shows the interface usages as well. [1] https://lore.kernel.org/lkml/54d4c322-cd6e-eefd-b161-2af2b56aae24@collabora… [2] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.… [3] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.… [4] https://lore.kernel.org/all/Y6Hc2d+7eTKs7AiH@x1n [5] https://lore.kernel.org/all/YyiDg79flhWoMDZB@gmail.com/ [6] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com/ Regards, Muhammad Usama Anjum Muhammad Usama Anjum (5): fs/proc/task_mmu: Implement IOCTL to get and optionally clear info about PTEs fs/proc/task_mmu: Add fast paths to get/clear PAGE_IS_WRITTEN flag tools headers UAPI: Update linux/fs.h with the kernel sources mm/pagemap: add documentation of PAGEMAP_SCAN IOCTL selftests: mm: add pagemap ioctl tests Peter Xu (1): userfaultfd: UFFD_FEATURE_WP_ASYNC Documentation/admin-guide/mm/pagemap.rst | 89 + Documentation/admin-guide/mm/userfaultfd.rst | 35 + fs/proc/task_mmu.c | 722 ++++++++ fs/userfaultfd.c | 26 +- include/linux/hugetlb.h | 1 + include/linux/userfaultfd_k.h | 28 +- include/uapi/linux/fs.h | 59 + include/uapi/linux/userfaultfd.h | 9 +- mm/hugetlb.c | 34 +- mm/memory.c | 28 +- tools/include/uapi/linux/fs.h | 59 + tools/testing/selftests/mm/.gitignore | 2 + tools/testing/selftests/mm/Makefile | 3 +- tools/testing/selftests/mm/config | 1 + tools/testing/selftests/mm/pagemap_ioctl.c | 1660 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 4 + 16 files changed, 2736 insertions(+), 24 deletions(-) create mode 100644 tools/testing/selftests/mm/pagemap_ioctl.c -- 2.40.1

1 year, 1 month

3
12
0 0

[PATCH] selftests/cgroup: Fix awk usage in test_cpuset_prs.sh that may cause error

by Juntong Deng

According to the awk manual, the -e option does not need to be specified in front of 'program' (unless you need to mix program-file). The redundant -e option can cause error when users use awk tools other than gawk (for example, mawk does not support the -e option). Error Example: awk: not an option: -e Cgroup v2 mount point not found! Signed-off-by: Juntong Deng <juntong.deng(a)outlook.com> --- tools/testing/selftests/cgroup/test_cpuset_prs.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh index 4afb132e4e4f..6820653e8432 100755 --- a/tools/testing/selftests/cgroup/test_cpuset_prs.sh +++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh @@ -20,7 +20,7 @@ skip_test() { WAIT_INOTIFY=$(cd $(dirname $0); pwd)/wait_inotify # Find cgroup v2 mount point -CGROUP2=$(mount -t cgroup2 | head -1 | awk -e '{print $3}') +CGROUP2=$(mount -t cgroup2 | head -1 | awk '{print $3}') [[ -n "$CGROUP2" ]] || skip_test "Cgroup v2 mount point not found!" CPUS=$(lscpu | grep "^CPU(s):" | sed -e "s/.*:[[:space:]]*//") -- 2.39.2

1 year, 1 month

2
2
0 0

[PATCH v2] kunit: Warn if tests are slow

by Maxime Ripard

Kunit recently gained support to setup attributes, the first one being the speed of a given test, then allowing to filter out slow tests. A slow test is defined in the documentation as taking more than one second. There's an another speed attribute called "super slow" but whose definition is less clear. Add support to the test runner to check the test execution time, and report tests that should be marked as slow but aren't. Signed-off-by: Maxime Ripard <mripard(a)kernel.org> --- To: Brendan Higgins <brendan.higgins(a)linux.dev> To: David Gow <davidgow(a)google.com> Cc: Jani Nikula <jani.nikula(a)linux.intel.com> Cc: Rae Moar <rmoar(a)google.com> Cc: linux-kselftest(a)vger.kernel.org Cc: kunit-dev(a)googlegroups.com Cc: linux-kernel(a)vger.kernel.org Changes from v1: - Split the patch out of the series - Change to trigger the warning only if the runtime is twice the threshold (Jani, Rae) - Split the speed check into a separate function (Rae) - Link: https://lore.kernel.org/all/20230911-kms-slow-tests-v1-0-d3800a69a1a1@kerne… --- lib/kunit/test.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/lib/kunit/test.c b/lib/kunit/test.c index 49698a168437..a1d5dd2bf87d 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -372,6 +372,25 @@ void kunit_init_test(struct kunit *test, const char *name, char *log) } EXPORT_SYMBOL_GPL(kunit_init_test); +#define KUNIT_SPEED_SLOW_THRESHOLD_S 1 + +static void kunit_run_case_check_speed(struct kunit *test, + struct kunit_case *test_case, + struct timespec64 duration) +{ + enum kunit_speed speed = test_case->attr.speed; + + if (duration.tv_sec < (2 * KUNIT_SPEED_SLOW_THRESHOLD_S)) + return; + + if (speed == KUNIT_SPEED_VERY_SLOW || speed == KUNIT_SPEED_SLOW) + return; + + kunit_warn(test, + "Test should be marked slow (runtime: %lld.%09lds)", + duration.tv_sec, duration.tv_nsec); +} + /* * Initializes and runs test case. Does not clean up or do post validations. */ @@ -379,6 +398,8 @@ static void kunit_run_case_internal(struct kunit *test, struct kunit_suite *suite, struct kunit_case *test_case) { + struct timespec64 start, end; + if (suite->init) { int ret; @@ -390,7 +411,13 @@ static void kunit_run_case_internal(struct kunit *test, } } + ktime_get_ts64(&start); + test_case->run_case(test); + + ktime_get_ts64(&end); + + kunit_run_case_check_speed(test, test_case, timespec64_sub(end, start)); } static void kunit_case_internal_cleanup(struct kunit *test) -- 2.41.0

1 year, 2 months

3
5
0 0

[PATCH v4 00/17] iommufd: Add nesting infrastructure

by Yi Liu

Nested translation is a hardware feature that is supported by many modern IOMMU hardwares. It has two stages (stage-1, stage-2) address translation to get access to the physical address. stage-1 translation table is owned by userspace (e.g. by a guest OS), while stage-2 is owned by kernel. Changes to stage-1 translation table should be followed by an IOTLB invalidation. Take Intel VT-d as an example, the stage-1 translation table is I/O page table. As the below diagram shows, guest I/O page table pointer in GPA (guest physical address) is passed to host and be used to perform the stage-1 address translation. Along with it, modifications to present mappings in the guest I/O page table should be followed with an IOTLB invalidation. .-------------. .---------------------------. | vIOMMU | | Guest I/O page table | | | '---------------------------' .----------------/ | PASID Entry |--- PASID cache flush --+ '-------------' | | | V | | I/O page table pointer in GPA '-------------' Guest ------| Shadow |---------------------------|-------- v v v Host .-------------. .------------------------. | pIOMMU | | FS for GIOVA->GPA | | | '------------------------' .----------------/ | | PASID Entry | V (Nested xlate) '----------------\.----------------------------------. | | | SS for GPA->HPA, unmanaged domain| | | '----------------------------------' '-------------' Where: - FS = First stage page tables - SS = Second stage page tables <Intel VT-d Nested translation> In IOMMUFD, all the translation tables are tracked by hw_pagetable (hwpt) and each has an iommu_domain allocated from iommu driver. So in this series hw_pagetable and iommu_domain means the same thing if no special note. IOMMUFD has already supported allocating hw_pagetable that is linked with an IOAS. However, nesting requires IOMMUFD to allow allocating hw_pagetable with driver specific parameters and interface to sync stage-1 IOTLB as user owns the stage-1 translation table. This series is based on the iommu hw info reporting series [1]. It first extends domain_alloc_user to allocate domains with user data and adds new op for invalidate stage-1 IOTLB for user-managed domains, then extends the IOMMUFD internal infrastructure to accept user_data and parent hwpt, relay the user_data/parent to iommu core to allocate user-managed iommu_domain. After it, extends the ioctl IOMMU_HWPT_ALLOC to accept user data and stage-2 hwpt ID. Along with it, ioctl IOMMU_HWPT_INVALIDATE is added to invalidate stage-1 IOTLB. This is needed for user-managed hwpts. Selftest is added as well to cover the new ioctls. Complete code can be found in [2], QEMU could can be found in [3]. At last, this is a team work together with Nicolin Chen, Lu Baolu. Thanks them for the help. ^_^. Look forward to your feedbacks. [1] https://lore.kernel.org/linux-iommu/20230818101033.4100-1-yi.l.liu@intel.co… - merged [2] https://github.com/yiliu1765/iommufd/tree/iommufd_nesting [3] https://github.com/yiliu1765/qemu/tree/zhenzhong/wip/iommufd_nesting_rfcv1 Change log: v4: - Separate HWPT alloc/destroy/abort functions between user-managed HWPTs and kernel-managed HWPTs - Rework invalidate uAPI to be a multi-request array-based design - Add a struct iommu_user_data_array and a helper for driver to sanitize and copy the entry data from user space invalidation array - Add a patch fixing TEST_LENGTH() in selftest program - Drop IOMMU_RESV_IOVA_RANGES patches - Update kdoc and inline comments - Drop the code to add IOMMU_RESV_SW_MSI to kernel-managed HWPT in nested translation, this does not change the rule that resv regions should only be added to the kernel-managed HWPT. The IOMMU_RESV_SW_MSI stuff will be added in later series as it is needed only by SMMU so far. v3: https://lore.kernel.org/linux-iommu/20230724110406.107212-1-yi.l.liu@intel.… - Add new uAPI things in alphabetical order - Pass in "enum iommu_hwpt_type hwpt_type" to op->domain_alloc_user for sanity, replacing the previous op->domain_alloc_user_data_len solution - Return ERR_PTR from domain_alloc_user instead of NULL - Only add IOMMU_RESV_SW_MSI to kernel-managed HWPT in nested translation (Kevin) - Add IOMMU_RESV_IOVA_RANGES to report resv iova ranges to userspace hence userspace is able to exclude the ranges in the stage-1 HWPT (e.g. guest I/O page table). (Kevin) - Add selftest coverage for the new IOMMU_RESV_IOVA_RANGES ioctl - Minor changes per Kevin's inputs v2: https://lore.kernel.org/linux-iommu/20230511143844.22693-1-yi.l.liu@intel.c… - Add union iommu_domain_user_data to include all user data structures to avoid passing void * in kernel APIs. - Add iommu op to return user data length for user domain allocation - Rename struct iommu_hwpt_alloc::data_type to be hwpt_type - Store the invalidation data length in iommu_domain_ops::cache_invalidate_user_data_len - Convert cache_invalidate_user op to be int instead of void - Remove @data_type in struct iommu_hwpt_invalidate - Remove out_hwpt_type_bitmap in struct iommu_hw_info hence drop patch 08 of v1 v1: https://lore.kernel.org/linux-iommu/20230309080910.607396-1-yi.l.liu@intel.… Thanks, Yi Liu Lu Baolu (1): iommu: Add nested domain support Nicolin Chen (12): iommufd: Unite all kernel-managed members into a struct iommufd: Separate kernel-managed HWPT alloc/destroy/abort functions iommufd: Add shared alloc_fn function pointer and mutex pointer iommufd: Add user-managed hw_pagetable support iommufd: Always setup MSI and anforce cc on kernel-managed domains iommufd/device: Add helpers to enforce/remove device reserved regions iommufd/selftest: Rework TEST_LENGTH to test min_size explicitly iommufd/selftest: Add nested domain allocation for mock domain iommufd/selftest: Add coverage for IOMMU_HWPT_ALLOC with nested HWPTs iommufd/selftest: Add mock_domain_cache_invalidate_user support iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl Yi Liu (4): iommu: Add hwpt_type with user_data for domain_alloc_user op iommufd: Pass in hwpt_type/user_data to iommufd_hw_pagetable_alloc() iommufd: Support IOMMU_HWPT_ALLOC allocation with user data iommufd: Add IOMMU_HWPT_INVALIDATE drivers/iommu/intel/iommu.c | 5 +- drivers/iommu/iommufd/device.c | 51 +++- drivers/iommu/iommufd/hw_pagetable.c | 257 ++++++++++++++++-- drivers/iommu/iommufd/iommufd_private.h | 59 +++- drivers/iommu/iommufd/iommufd_test.h | 40 +++ drivers/iommu/iommufd/main.c | 3 + drivers/iommu/iommufd/selftest.c | 184 ++++++++++++- include/linux/iommu.h | 110 +++++++- include/uapi/linux/iommufd.h | 60 +++- tools/testing/selftests/iommu/iommufd.c | 209 +++++++++++++- .../selftests/iommu/iommufd_fail_nth.c | 3 +- tools/testing/selftests/iommu/iommufd_utils.h | 91 ++++++- 12 files changed, 998 insertions(+), 74 deletions(-) -- 2.34.1

1 year, 2 months

7
105
0 0

[PATCH v4 00/36] arm64/gcs: Provide support for GCS in userspace

by Mark Brown

The arm64 Guarded Control Stack (GCS) feature provides support for hardware protected stacks of return addresses, intended to provide hardening against return oriented programming (ROP) attacks and to make it easier to gather call stacks for applications such as profiling. When GCS is active a secondary stack called the Guarded Control Stack is maintained, protected with a memory attribute which means that it can only be written with specific GCS operations. The current GCS pointer can not be directly written to by userspace. When a BL is executed the value stored in LR is also pushed onto the GCS, and when a RET is executed the top of the GCS is popped and compared to LR with a fault being raised if the values do not match. GCS operations may only be performed on GCS pages, a data abort is generated if they are not. The combination of hardware enforcement and lack of extra instructions in the function entry and exit paths should result in something which has less overhead and is more difficult to attack than a purely software implementation like clang's shadow stacks. This series implements support for use of GCS by userspace, along with support for use of GCS within KVM guests. It does not enable use of GCS by either EL1 or EL2, this will be implemented separately. Executables are started without GCS and must use a prctl() to enable it, it is expected that this will be done very early in application execution by the dynamic linker or other startup code. x86 has an equivalent feature called shadow stacks, this series depends on the x86 patches for generic memory management support for the new guarded/shadow stack page type and shares APIs as much as possible. As there has been extensive discussion with the wider community around the ABI for shadow stacks I have as far as practical kept implementation decisions close to those for x86, anticipating that review would lead to similar conclusions in the absence of strong reasoning for divergence. The main divergence I am concious of is that x86 allows shadow stack to be enabled and disabled repeatedly, freeing the shadow stack for the thread whenever disabled, while this implementation keeps the GCS allocated after disable but refuses to reenable it. This is to avoid races with things actively walking the GCS during a disable, we do anticipate that some systems will wish to disable GCS at runtime but are not aware of any demand for subsequently reenabling it. x86 uses an arch_prctl() to manage enable and disable, since only x86 and S/390 use arch_prctl() a generic prctl() was proposed[1] as part of a patch set for the equivalent RISC-V zisslpcfi feature which I initially adopted fairly directly but following review feedback has been revised quite a bit. There is an open issue with support for CRIU, on x86 this required the ability to set the GCS mode via ptrace. This series supports configuring mode bits other than enable/disable via ptrace but it needs to be confirmed if this is sufficient. There's a few bits where I'm not convinced with where I've placed things, in particular the GCS write operation is in the GCS header not in uaccess.h, I wasn't sure what was clearest there and am probably too close to the code to have a clear opinion. The reporting of GCS in /proc/PID/smaps is also a bit awkward. The series depends on the x86 shadow stack support: https://lore.kernel.org/lkml/20230227222957.24501-1-rick.p.edgecombe@intel.… I've rebased this onto v6.5-rc4 but not included it in the series in order to avoid confusion with Rick's work and cut down the size of the series, you can see the branch at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git arm64-gcs [1] https://lore.kernel.org/lkml/20230213045351.3945824-1-debug@rivosinc.com/ Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v4: - Implement flags for map_shadow_stack() allowing the cap and end of stack marker to be enabled independently or not at all. - Relax size and alignment requirements for map_shadow_stack(). - Add more blurb explaining the advantages of hardware enforcement. - Link to v3: https://lore.kernel.org/r/20230731-arm64-gcs-v3-0-cddf9f980d98@kernel.org Changes in v3: - Rebase onto v6.5-rc4. - Add a GCS barrier on context switch. - Add a GCS stress test. - Link to v2: https://lore.kernel.org/r/20230724-arm64-gcs-v2-0-dc2c1d44c2eb@kernel.org Changes in v2: - Rebase onto v6.5-rc3. - Rework prctl() interface to allow each bit to be locked independently. - map_shadow_stack() now places the cap token based on the size requested by the caller not the actual space allocated. - Mode changes other than enable via ptrace are now supported. - Expand test coverage. - Various smaller fixes and adjustments. - Link to v1: https://lore.kernel.org/r/20230716-arm64-gcs-v1-0-bf567f93bba6@kernel.org --- Mark Brown (36): prctl: arch-agnostic prctl for shadow stack arm64: Document boot requirements for Guarded Control Stacks arm64/gcs: Document the ABI for Guarded Control Stacks arm64/sysreg: Add new system registers for GCS arm64/sysreg: Add definitions for architected GCS caps arm64/gcs: Add manual encodings of GCS instructions arm64/gcs: Provide copy_to_user_gcs() arm64/cpufeature: Runtime detection of Guarded Control Stack (GCS) arm64/mm: Allocate PIE slots for EL0 guarded control stack mm: Define VM_SHADOW_STACK for arm64 when we support GCS arm64/mm: Map pages for guarded control stack KVM: arm64: Manage GCS registers for guests arm64/gcs: Allow GCS usage at EL0 and EL1 arm64/idreg: Add overrride for GCS arm64/hwcap: Add hwcap for GCS arm64/traps: Handle GCS exceptions arm64/mm: Handle GCS data aborts arm64/gcs: Context switch GCS state for EL0 arm64/gcs: Allocate a new GCS for threads with GCS enabled arm64/gcs: Implement shadow stack prctl() interface arm64/mm: Implement map_shadow_stack() arm64/signal: Set up and restore the GCS context for signal handlers arm64/signal: Expose GCS state in signal frames arm64/ptrace: Expose GCS via ptrace and core files arm64: Add Kconfig for Guarded Control Stack (GCS) kselftest/arm64: Verify the GCS hwcap kselftest/arm64: Add GCS as a detected feature in the signal tests kselftest/arm64: Add framework support for GCS to signal handling tests kselftest/arm64: Allow signals tests to specify an expected si_code kselftest/arm64: Always run signals tests with GCS enabled kselftest/arm64: Add very basic GCS test program kselftest/arm64: Add a GCS test program built with the system libc kselftest/arm64: Add test coverage for GCS mode locking selftests/arm64: Add GCS signal tests kselftest/arm64: Add a GCS stress test kselftest/arm64: Enable GCS for the FP stress tests Documentation/admin-guide/kernel-parameters.txt | 3 + Documentation/arch/arm64/booting.rst | 22 + Documentation/arch/arm64/elf_hwcaps.rst | 3 + Documentation/arch/arm64/gcs.rst | 228 +++++++++ Documentation/arch/arm64/index.rst | 1 + Documentation/filesystems/proc.rst | 2 +- arch/arm64/Kconfig | 19 + arch/arm64/include/asm/cpufeature.h | 6 + arch/arm64/include/asm/el2_setup.h | 17 + arch/arm64/include/asm/esr.h | 28 +- arch/arm64/include/asm/exception.h | 2 + arch/arm64/include/asm/gcs.h | 106 ++++ arch/arm64/include/asm/hwcap.h | 1 + arch/arm64/include/asm/kvm_arm.h | 4 +- arch/arm64/include/asm/kvm_host.h | 12 + arch/arm64/include/asm/pgtable-prot.h | 14 +- arch/arm64/include/asm/processor.h | 7 + arch/arm64/include/asm/sysreg.h | 20 + arch/arm64/include/asm/uaccess.h | 42 ++ arch/arm64/include/uapi/asm/hwcap.h | 1 + arch/arm64/include/uapi/asm/ptrace.h | 8 + arch/arm64/include/uapi/asm/sigcontext.h | 9 + arch/arm64/kernel/cpufeature.c | 19 + arch/arm64/kernel/cpuinfo.c | 1 + arch/arm64/kernel/entry-common.c | 23 + arch/arm64/kernel/idreg-override.c | 2 + arch/arm64/kernel/process.c | 85 ++++ arch/arm64/kernel/ptrace.c | 59 +++ arch/arm64/kernel/signal.c | 237 ++++++++- arch/arm64/kernel/traps.c | 11 + arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 17 + arch/arm64/kvm/sys_regs.c | 22 + arch/arm64/mm/Makefile | 1 + arch/arm64/mm/fault.c | 78 ++- arch/arm64/mm/gcs.c | 234 +++++++++ arch/arm64/mm/mmap.c | 12 +- arch/arm64/tools/cpucaps | 1 + arch/arm64/tools/sysreg | 55 +++ fs/proc/task_mmu.c | 3 + include/linux/mm.h | 16 +- include/linux/syscalls.h | 1 + include/uapi/asm-generic/unistd.h | 5 +- include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 22 + kernel/sys.c | 30 ++ kernel/sys_ni.c | 1 + tools/testing/selftests/arm64/Makefile | 2 +- tools/testing/selftests/arm64/abi/hwcap.c | 19 + tools/testing/selftests/arm64/fp/assembler.h | 15 + tools/testing/selftests/arm64/fp/fpsimd-test.S | 2 + tools/testing/selftests/arm64/fp/sve-test.S | 2 + tools/testing/selftests/arm64/fp/za-test.S | 2 + tools/testing/selftests/arm64/fp/zt-test.S | 2 + tools/testing/selftests/arm64/gcs/.gitignore | 5 + tools/testing/selftests/arm64/gcs/Makefile | 24 + tools/testing/selftests/arm64/gcs/asm-offsets.h | 0 tools/testing/selftests/arm64/gcs/basic-gcs.c | 356 ++++++++++++++ tools/testing/selftests/arm64/gcs/gcs-locking.c | 200 ++++++++ .../selftests/arm64/gcs/gcs-stress-thread.S | 311 ++++++++++++ tools/testing/selftests/arm64/gcs/gcs-stress.c | 532 +++++++++++++++++++++ tools/testing/selftests/arm64/gcs/gcs-util.h | 87 ++++ tools/testing/selftests/arm64/gcs/libc-gcs.c | 500 +++++++++++++++++++ tools/testing/selftests/arm64/signal/.gitignore | 1 + .../testing/selftests/arm64/signal/test_signals.c | 17 +- .../testing/selftests/arm64/signal/test_signals.h | 6 + .../selftests/arm64/signal/test_signals_utils.c | 32 +- .../selftests/arm64/signal/test_signals_utils.h | 39 ++ .../arm64/signal/testcases/gcs_exception_fault.c | 59 +++ .../selftests/arm64/signal/testcases/gcs_frame.c | 78 +++ .../arm64/signal/testcases/gcs_write_fault.c | 67 +++ .../selftests/arm64/signal/testcases/testcases.c | 7 + .../selftests/arm64/signal/testcases/testcases.h | 1 + 72 files changed, 3823 insertions(+), 34 deletions(-) --- base-commit: ed0e1456f04be7a93c9a186e8e13aed78b555617 change-id: 20230303-arm64-gcs-e311ab0d8729 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 year, 2 months

5
88
0 0

[PATCH v2 0/6] iommufd support allocating nested parent domain

by Yi Liu

IOMMU hardwares that support nested translation would have two stages address translation (normally mentioned as stage-1 and stage-2). The page table formats of the stage-1 and stage-2 can be different. e.g., VT-d has different page table formats for stage-1 and stage-2. Nested parent domain is the iommu domain used to represent the stage-2 translation. In IOMMUFD, both stage-1 and stage-2 translation are tracked as HWPT (a.k.a. iommu domain). Stage-2 HWPT is parent of stage-1 HWPT as stage-1 cannot work alone in nested translation. In the cases of stage-1 and stage-2 page table format are different, the parent HWPT should use exactly the stage-2 page table format. However, the existing kernel hides the format selection in iommu drivers, so the domain allocated via IOMMU_HWPT_ALLOC can use either stage-1 page table format or stage-2 page table format, there is no guarantees for it. To enforce the page table format of the nested parent domain, this series introduces a new iommu op (domain_alloc_user) which can accept user flags to allocate domain as userspace requires. It also converts IOMMUFD to use the new domain_alloc_user op for domain allocation if supported, then extends the IOMMU_HWPT_ALLOC ioctl to pass down a NEST_PARENT flag to allocate a HWPT which can be used as parent. This series implements the new op in Intel iommu driver to have a complete picture. It is a preparation for adding nesting support in IOMMUFD/IOMMU. Complete code can be found: https://github.com/yiliu1765/iommufd/tree/iommufd_alloc_user_v2 Change log: v2: - Require domain_alloc_user op if IOMMU_HWPT_ALLOC passes non-zero flags (Kevin) - IOMMUFD core should check kernel known flags while iommu driver needs to check supported flags as well (Jason) - Minor tweaks per Baolu's comment v1: https://lore.kernel.org/linux-iommu/20230919092523.39286-1-yi.l.liu@intel.c… Regards, Yi Liu Yi Liu (6): iommu: Add new iommu op to create domains owned by userspace iommufd/hw_pagetable: Use domain_alloc_user op for domain allocation iommufd/hw_pagetable: Accepts user flags for domain allocation iommufd/hw_pagetable: Support allocating nested parent domain iommufd/selftest: Add domain_alloc_user() support in iommu mock iommu/vt-d: Add domain_alloc_user op drivers/iommu/intel/iommu.c | 28 +++++++++++++++++ drivers/iommu/iommufd/device.c | 2 +- drivers/iommu/iommufd/hw_pagetable.c | 31 ++++++++++++++----- drivers/iommu/iommufd/iommufd_private.h | 3 +- drivers/iommu/iommufd/selftest.c | 19 ++++++++++++ include/linux/iommu.h | 11 ++++++- include/uapi/linux/iommufd.h | 12 ++++++- tools/testing/selftests/iommu/iommufd.c | 24 +++++++++++--- .../selftests/iommu/iommufd_fail_nth.c | 2 +- tools/testing/selftests/iommu/iommufd_utils.h | 11 +++++-- 10 files changed, 124 insertions(+), 19 deletions(-) -- 2.34.1

1 year, 2 months

5
21
0 0

[PATCH v5 00/11] Add Intel VT-d nested translation

by Yi Liu

This is to add Intel VT-d nested translation based on IOMMUFD nesting infrastructure. As the iommufd nesting infrastructure series[1], iommu core supports new ops to report iommu hardware information, allocate domains with user data and invalidate stage-1 IOTLB when there is mapping changed in stage-1 page table. The data required in the three paths are vendor-specific, so 1) IOMMU_HWPT_TYPE_VTD_S1 is defined for the Intel VT-d stage-1 page table, it will be used in the stage-1 domain allocation and IOTLB syncing path. struct iommu_hwpt_vtd_s1 is defined to pass user_data for the Intel VT-d stage-1 domain allocation. struct iommu_hwpt_vtd_s1_invalidate is defined to pass the data for the Intel VT-d stage-1 IOTLB invalidation. 2) IOMMU_HW_INFO_TYPE_INTEL_VTD and struct iommu_hw_info_vtd are defined to report iommu hardware information for Intel VT-d. With above IOMMUFD extensions, the intel iommu driver implements the three paths to support nested translation. The first Intel platform supporting nested translation is Sapphire Rapids which, unfortunately, has a hardware errata [2] requiring special treatment. This errata happens when a stage-1 page table page (either level) is located in a stage-2 read-only region. In that case the IOMMU hardware may ignore the stage-2 RO permission and still set the A/D bit in stage-1 page table entries during page table walking. A flag IOMMU_HW_INFO_VTD_ERRATA_772415_SPR17 is introduced to report this errata to userspace. With that restriction the user should either disable nested translation to favor RO stage-2 mappings or ensure no RO stage-2 mapping to enable nested translation. Intel-iommu driver is armed with necessary checks to prevent such mix in patch12 of this series. Qemu currently does add RO mappings though. The vfio agent in Qemu simply maps all valid regions in the GPA address space which certainly includes RO regions e.g. vbios. In reality we don't know a usage relying on DMA reads from the BIOS region. Hence finding a way to skip RO regions (e.g. via a discard manager) in Qemu might be an acceptable tradeoff. The actual change needs more discussion in Qemu community. For now we just hacked Qemu to test. Complete code can be found in [3], corresponding QEMU could can be found in [4]. [1] https://lore.kernel.org/linux-iommu/20230921075138.124099-1-yi.l.liu@intel.… [2] https://www.intel.com/content/www/us/en/content-details/772415/content-deta… [3] https://github.com/yiliu1765/iommufd/tree/iommufd_nesting [4] https://github.com/yiliu1765/qemu/tree/zhenzhong/wip/iommufd_nesting_rfcv1 Change log: v5: - Add Kevin's r-b for patch 2, 3 ,5 8, 10 - Drop enforce_cache_coherency callback from the nested type domain ops (Kevin) - Remove duplicate agaw check in patch 04 (Kevin) - Remove duplicate domain_update_iommu_cap() in patch 06 (Kevin) - Check parent's force_snooping to set pgsnp in the pasid entry (Kevin) - uapi data structure check (Kevin) - Simplify the errata handling as user can allocate nested parent domain v4: https://lore.kernel.org/linux-iommu/20230724111335.107427-1-yi.l.liu@intel.… - Remove ascii art tables (Jason) - Drop EMT (Tina, Jason) - Drop MTS and related definitions (Kevin) - Rename macro IOMMU_VTD_PGTBL_ to IOMMU_VTD_S1_ (Kevin) - Rename struct iommu_hwpt_intel_vtd_ to iommu_hwpt_vtd_ (Kevin) - Rename struct iommu_hwpt_intel_vtd to iommu_hwpt_vtd_s1 (Kevin) - Put the vendor specific hwpt alloc data structure before enuma iommu_hwpt_type (Kevin) - Do not trim the higher page levels of S2 domain in nested domain attachment as the S2 domain may have been used independently. (Kevin) - Remove the first-stage pgd check against the maximum address of s2_domain as hw can check it anyhow. It makes sense to check every pfns used in the stage-1 page table. But it cannot make it. So just leave it to hw. (Kevin) - Split the iotlb flush part into an order of uapi, helper and callback implementation (Kevin) - Change the policy of VT-d nesting errata, disallow RO mapping once a domain is used as parent domain of a nested domain. This removes the nested_users counting. (Kevin) - Minor fix for "make htmldocs" v3: https://lore.kernel.org/linux-iommu/20230511145110.27707-1-yi.l.liu@intel.c… - Further split the patches into an order of adding helpers for nested domain, iotlb flush, nested domain attachment and nested domain allocation callback, then report the hw_info to userspace. - Add batch support in cache invalidation from userspace - Disallow nested translation usage if RO mappings exists in stage-2 domain due to errata on readonly mappings on Sapphire Rapids platform. v2: https://lore.kernel.org/linux-iommu/20230309082207.612346-1-yi.l.liu@intel.… - The iommufd infrastructure is split to be separate series. v1: https://lore.kernel.org/linux-iommu/20230209043153.14964-1-yi.l.liu@intel.c… Regards, Yi Liu Lu Baolu (5): iommu/vt-d: Extend dmar_domain to support nested domain iommu/vt-d: Add helper for nested domain allocation iommu/vt-d: Add helper to setup pasid nested translation iommu/vt-d: Add nested domain allocation iommu/vt-d: Disallow read-only mappings to nest parent domain Yi Liu (6): iommufd: Add data structure for Intel VT-d stage-1 domain allocation iommu/vt-d: Make domain attach helpers to be extern iommu/vt-d: Set the nested domain to a device iommufd: Add data structure for Intel VT-d stage-1 cache invalidation iommu/vt-d: Make iotlb flush helpers to be extern iommu/vt-d: Add iotlb flush for nested domain drivers/iommu/intel/Makefile | 2 +- drivers/iommu/intel/iommu.c | 60 +++++++++---- drivers/iommu/intel/iommu.h | 51 +++++++++-- drivers/iommu/intel/nested.c | 162 +++++++++++++++++++++++++++++++++++ drivers/iommu/intel/pasid.c | 125 +++++++++++++++++++++++++++ drivers/iommu/intel/pasid.h | 2 + include/uapi/linux/iommufd.h | 76 +++++++++++++++- 7 files changed, 452 insertions(+), 26 deletions(-) create mode 100644 drivers/iommu/intel/nested.c -- 2.34.1

1 year, 2 months

3
25
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2023