September 2023 - Linux-kselftest-mirror

[PATCH] kselftest/alsa: pcm-test: Report cards declared in config but missing

by Nícolas F. R. A. Prado

When parsing the configs, keep track of card configurations that match the current system but haven't matched any card, and report those as test failures as they represent that a card which was expected to be present on the system is missing. This allows the configuration files to not only be used to detect missing PCM devices (which is currently possible) but also that the soundcard hasn't been registered at all. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- tools/testing/selftests/alsa/alsa-local.h | 10 +++ tools/testing/selftests/alsa/conf.c | 100 ++++++++++++---------- tools/testing/selftests/alsa/pcm-test.c | 10 +++ 3 files changed, 73 insertions(+), 47 deletions(-) diff --git a/tools/testing/selftests/alsa/alsa-local.h b/tools/testing/selftests/alsa/alsa-local.h index de030dc23bd1..29143ef52101 100644 --- a/tools/testing/selftests/alsa/alsa-local.h +++ b/tools/testing/selftests/alsa/alsa-local.h @@ -24,4 +24,14 @@ int conf_get_bool(snd_config_t *root, const char *key1, const char *key2, int de void conf_get_string_array(snd_config_t *root, const char *key1, const char *key2, const char **array, int array_size, const char *def); +struct card_cfg_data { + int card; + snd_config_t *config; + const char *filename; + const char *config_id; + struct card_cfg_data *next; +}; + +extern struct card_cfg_data *conf_cards; + #endif /* __ALSA_LOCAL_H */ diff --git a/tools/testing/selftests/alsa/conf.c b/tools/testing/selftests/alsa/conf.c index 2f1685a3eae1..00925eb8d9f4 100644 --- a/tools/testing/selftests/alsa/conf.c +++ b/tools/testing/selftests/alsa/conf.c @@ -19,14 +19,7 @@ #define SYSFS_ROOT "/sys" -struct card_data { - int card; - snd_config_t *config; - const char *filename; - struct card_data *next; -}; - -static struct card_data *conf_cards; +struct card_cfg_data *conf_cards; static const char *alsa_config = "ctl.hw {\n" @@ -97,9 +90,9 @@ snd_config_t *get_alsalib_config(void) return config; } -static struct card_data *conf_data_by_card(int card, bool msg) +static struct card_cfg_data *conf_data_by_card(int card, bool msg) { - struct card_data *conf; + struct card_cfg_data *conf; for (conf = conf_cards; conf; conf = conf->next) { if (conf->card == card) { @@ -229,55 +222,31 @@ static bool sysfs_match(const char *sysfs_root, snd_config_t *config) return iter > 0; } -static bool test_filename1(int card, const char *filename, const char *sysfs_card_root) +static void assign_card_config(int card, const char *sysfs_card_root) { - struct card_data *data, *data2; - snd_config_t *config, *sysfs_config, *card_config, *sysfs_card_config, *node; - snd_config_iterator_t i, next; + struct card_cfg_data *data; + snd_config_t *sysfs_card_config; - config = conf_load_from_file(filename); - if (snd_config_search(config, "sysfs", &sysfs_config) || - snd_config_get_type(sysfs_config) != SND_CONFIG_TYPE_COMPOUND) - ksft_exit_fail_msg("Missing global sysfs block in filename %s\n", filename); - if (snd_config_search(config, "card", &card_config) || - snd_config_get_type(card_config) != SND_CONFIG_TYPE_COMPOUND) - ksft_exit_fail_msg("Missing global card block in filename %s\n", filename); - if (!sysfs_match(SYSFS_ROOT, sysfs_config)) - return false; - snd_config_for_each(i, next, card_config) { - node = snd_config_iterator_entry(i); - if (snd_config_search(node, "sysfs", &sysfs_card_config) || - snd_config_get_type(sysfs_card_config) != SND_CONFIG_TYPE_COMPOUND) - ksft_exit_fail_msg("Missing card sysfs block in filename %s\n", filename); + for (data = conf_cards; data; data = data->next) { + snd_config_search(data->config, "sysfs", &sysfs_card_config); if (!sysfs_match(sysfs_card_root, sysfs_card_config)) continue; - data = malloc(sizeof(*data)); - if (!data) - ksft_exit_fail_msg("Out of memory\n"); - data2 = conf_data_by_card(card, false); - if (data2) - ksft_exit_fail_msg("Duplicate card '%s' <-> '%s'\n", filename, data2->filename); + data->card = card; - data->filename = filename; - data->config = node; - data->next = conf_cards; - conf_cards = data; - return true; + break; } - return false; } -static bool test_filename(const char *filename) +static void assign_card_configs(void) { char fn[128]; int card; for (card = 0; card < 32; card++) { snprintf(fn, sizeof(fn), "%s/class/sound/card%d", SYSFS_ROOT, card); - if (access(fn, R_OK) == 0 && test_filename1(card, filename, fn)) - return true; + if (access(fn, R_OK) == 0) + assign_card_config(card, fn); } - return false; } static int filename_filter(const struct dirent *dirent) @@ -296,6 +265,41 @@ static int filename_filter(const struct dirent *dirent) return 0; } +static bool match_config(const char *filename) +{ + struct card_cfg_data *data; + snd_config_t *config, *sysfs_config, *card_config, *sysfs_card_config, *node; + snd_config_iterator_t i, next; + + config = conf_load_from_file(filename); + if (snd_config_search(config, "sysfs", &sysfs_config) || + snd_config_get_type(sysfs_config) != SND_CONFIG_TYPE_COMPOUND) + ksft_exit_fail_msg("Missing global sysfs block in filename %s\n", filename); + if (snd_config_search(config, "card", &card_config) || + snd_config_get_type(card_config) != SND_CONFIG_TYPE_COMPOUND) + ksft_exit_fail_msg("Missing global card block in filename %s\n", filename); + if (!sysfs_match(SYSFS_ROOT, sysfs_config)) + return false; + snd_config_for_each(i, next, card_config) { + node = snd_config_iterator_entry(i); + if (snd_config_search(node, "sysfs", &sysfs_card_config) || + snd_config_get_type(sysfs_card_config) != SND_CONFIG_TYPE_COMPOUND) + ksft_exit_fail_msg("Missing card sysfs block in filename %s\n", filename); + + data = malloc(sizeof(*data)); + if (!data) + ksft_exit_fail_msg("Out of memory\n"); + data->filename = filename; + data->config = node; + data->card = -1; + if (snd_config_get_id(node, &data->config_id)) + ksft_exit_fail_msg("snd_config_get_id failed for card\n"); + data->next = conf_cards; + conf_cards = data; + } + return true; +} + void conf_load(void) { const char *fn = "conf.d"; @@ -311,17 +315,19 @@ void conf_load(void) if (filename == NULL) ksft_exit_fail_msg("Out of memory\n"); sprintf(filename, "%s/%s", fn, namelist[j]->d_name); - if (test_filename(filename)) + if (match_config(filename)) filename = NULL; free(filename); free(namelist[j]); } free(namelist); + + assign_card_configs(); } void conf_free(void) { - struct card_data *conf; + struct card_cfg_data *conf; while (conf_cards) { conf = conf_cards; @@ -332,7 +338,7 @@ void conf_free(void) snd_config_t *conf_by_card(int card) { - struct card_data *conf; + struct card_cfg_data *conf; conf = conf_data_by_card(card, true); if (conf) diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c index c0a39818c5a4..de664dedb541 100644 --- a/tools/testing/selftests/alsa/pcm-test.c +++ b/tools/testing/selftests/alsa/pcm-test.c @@ -566,6 +566,7 @@ void *card_thread(void *data) int main(void) { struct card_data *card; + struct card_cfg_data *conf; struct pcm_data *pcm; snd_config_t *global_config, *cfg; int num_pcm_tests = 0, num_tests, num_std_pcm_tests; @@ -583,6 +584,10 @@ int main(void) find_pcms(); + for (conf = conf_cards; conf; conf = conf->next) + if (conf->card < 0) + num_missing++; + num_std_pcm_tests = conf_get_count(default_pcm_config, "test", NULL); for (pcm = pcm_list; pcm != NULL; pcm = pcm->next) { @@ -598,6 +603,11 @@ int main(void) ksft_set_plan(num_missing + num_pcm_tests); + for (conf = conf_cards; conf; conf = conf->next) + if (conf->card < 0) + ksft_test_result_fail("test.missing.%s.%s\n", + conf->filename, conf->config_id); + for (pcm = pcm_missing; pcm != NULL; pcm = pcm->next) { ksft_test_result(false, "test.missing.%d.%d.%d.%s\n", pcm->card, pcm->device, pcm->subdevice, -- 2.42.0

2 years

4
3
0 0

[PATCH -fixes] riscv: kselftests: Fix mm build by removing testcases subdirectory

by Alexandre Ghiti

kselftests fails to build because the mm/testcases subdirectory is not created and then the compiler fails to output the binary there. So fix this by simply removing this subdirectory which is not very useful. Signed-off-by: Alexandre Ghiti <alexghiti(a)rivosinc.com> --- tools/testing/selftests/riscv/mm/Makefile | 6 +++--- .../selftests/riscv/mm/{testcases => }/mmap_bottomup.c | 2 +- .../selftests/riscv/mm/{testcases => }/mmap_default.c | 2 +- .../testing/selftests/riscv/mm/{testcases => }/mmap_test.h | 0 .../testing/selftests/riscv/mm/{testcases => }/run_mmap.sh | 0 5 files changed, 5 insertions(+), 5 deletions(-) rename tools/testing/selftests/riscv/mm/{testcases => }/mmap_bottomup.c (97%) rename tools/testing/selftests/riscv/mm/{testcases => }/mmap_default.c (97%) rename tools/testing/selftests/riscv/mm/{testcases => }/mmap_test.h (100%) rename tools/testing/selftests/riscv/mm/{testcases => }/run_mmap.sh (100%) diff --git a/tools/testing/selftests/riscv/mm/Makefile b/tools/testing/selftests/riscv/mm/Makefile index 11e0f0568923..c333263f2b27 100644 --- a/tools/testing/selftests/riscv/mm/Makefile +++ b/tools/testing/selftests/riscv/mm/Makefile @@ -5,11 +5,11 @@ # Additional include paths needed by kselftest.h and local headers CFLAGS += -D_GNU_SOURCE -std=gnu99 -I. -TEST_GEN_FILES := testcases/mmap_default testcases/mmap_bottomup +TEST_GEN_FILES := mmap_default mmap_bottomup -TEST_PROGS := testcases/run_mmap.sh +TEST_PROGS := run_mmap.sh include ../../lib.mk -$(OUTPUT)/mm: testcases/mmap_default.c testcases/mmap_bottomup.c testcases/mmap_tests.h +$(OUTPUT)/mm: mmap_default.c mmap_bottomup.c mmap_tests.h $(CC) -o$@ $(CFLAGS) $(LDFLAGS) $^ diff --git a/tools/testing/selftests/riscv/mm/testcases/mmap_bottomup.c b/tools/testing/selftests/riscv/mm/mmap_bottomup.c similarity index 97% rename from tools/testing/selftests/riscv/mm/testcases/mmap_bottomup.c rename to tools/testing/selftests/riscv/mm/mmap_bottomup.c index b29379f7e478..1757d19ca89b 100644 --- a/tools/testing/selftests/riscv/mm/testcases/mmap_bottomup.c +++ b/tools/testing/selftests/riscv/mm/mmap_bottomup.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only #include <sys/mman.h> -#include <testcases/mmap_test.h> +#include <mmap_test.h> #include "../../kselftest_harness.h" diff --git a/tools/testing/selftests/riscv/mm/testcases/mmap_default.c b/tools/testing/selftests/riscv/mm/mmap_default.c similarity index 97% rename from tools/testing/selftests/riscv/mm/testcases/mmap_default.c rename to tools/testing/selftests/riscv/mm/mmap_default.c index d1accb91b726..c63c60b9397e 100644 --- a/tools/testing/selftests/riscv/mm/testcases/mmap_default.c +++ b/tools/testing/selftests/riscv/mm/mmap_default.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only #include <sys/mman.h> -#include <testcases/mmap_test.h> +#include <mmap_test.h> #include "../../kselftest_harness.h" diff --git a/tools/testing/selftests/riscv/mm/testcases/mmap_test.h b/tools/testing/selftests/riscv/mm/mmap_test.h similarity index 100% rename from tools/testing/selftests/riscv/mm/testcases/mmap_test.h rename to tools/testing/selftests/riscv/mm/mmap_test.h diff --git a/tools/testing/selftests/riscv/mm/testcases/run_mmap.sh b/tools/testing/selftests/riscv/mm/run_mmap.sh similarity index 100% rename from tools/testing/selftests/riscv/mm/testcases/run_mmap.sh rename to tools/testing/selftests/riscv/mm/run_mmap.sh -- 2.39.2

2 years

3
2
0 0

[PATCH 0/2] drm/tests: Flag slow kunit tests as such

by Maxime Ripard

Hi, Here's a series that sets the speed attribute to slow on DRM tests that are taking a while to execute. With those patches, an initial run of the drm tests on arm64 were taking 59s to execute with: $ ./tools/testing/kunit/kunit.py run \ --kunitconfig=drivers/gpu/drm/tests \ --arch arm64 \ --cross_compile aarch64-linux-gnu- ... [11:50:07] Testing complete. Ran 340 tests: passed: 340 [11:50:07] Elapsed time: 62.261s total, 0.001s configuring, 2.703s building, 59.532s running and are now taking 1.7s when filtering out the slow tests: $ ./tools/testing/kunit/kunit.py run \ --kunitconfig=drivers/gpu/drm/tests \ --arch arm64 \ --cross_compile aarch64-linux-gnu- \ --filter "speed>slow" ... [11:47:52] Testing complete. Ran 332 tests: passed: 332 [11:47:52] Elapsed time: 6.449s total, 0.001s configuring, 4.728s building, 1.678s running Let me know what you think, Maxime Signed-off-by: Maxime Ripard <mripard(a)kernel.org> --- Maxime Ripard (2): kunit: Warn if tests are slow drm/tests: Flag slow tests as such drivers/gpu/drm/tests/drm_buddy_test.c | 2 +- drivers/gpu/drm/tests/drm_mm_test.c | 14 +++++++------- lib/kunit/test.c | 16 ++++++++++++++++ 3 files changed, 24 insertions(+), 8 deletions(-) --- base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d change-id: 20230911-kms-slow-tests-0261bee9a54b Best regards, -- Maxime Ripard <mripard(a)kernel.org>

2 years

4
8
0 0

[PATCH 0/4] kunit: Fix some bugs in kunit

by Jinjie Ruan

The test_cases is not freed in kunit_free_suite_set(). And the copy pointer may be moved in kunit_filter_suites(). The filtered_suite and filtered_suite->test_cases allocated in the last kunit_filter_attr_tests() in last inner for loop may be leaked if kunit_filter_suites() fails. If kunit_filter_suites() succeeds, not only copy but also filtered_suite and filtered_suite->test_cases should be freed. Jinjie Ruan (4): kunit: Fix missed memory release in kunit_free_suite_set() kunit: Fix the wrong kfree of copy for kunit_filter_suites() kunit: Fix possible memory leak in kunit_filter_suites() kunit: test: Fix the possible memory leak in executor_test lib/kunit/executor.c | 23 +++++++++++++++++------ lib/kunit/executor_test.c | 24 ++++++++++++++++++------ 2 files changed, 35 insertions(+), 12 deletions(-) -- 2.34.1

2 years

4
12
0 0

[PATCH v6 0/7] Optimize mremap during mutual alignment within PMD

by Joel Fernandes (Google)

Hello! Here is v6 of the mremap start address optimization / fix for exec warning. Should be hopefully final now and only 2/7 and 6/7 need a tag. Thanks a lot to Lorenzo and Linus for the detailed reviews. Description of patches ====================== These patches optimizes the start addresses in move_page_tables() and tests the changes. It addresses a warning [1] that occurs due to a downward, overlapping move on a mutually-aligned offset within a PMD during exec. By initiating the copy process at the PMD level when such alignment is present, we can prevent this warning and speed up the copying process at the same time. Linus Torvalds suggested this idea. Check the individual patches for more details. [1] https://lore.kernel.org/all/ZB2GTBD%2FLWTrkOiO@dhcp22.suse.cz/ History of patches: v5->v6: 1. Reworking the stack case a bit more and tested it (should be final now). 2. Other small nits. v4->v5: 1. Rebased on mainline. 2. Several improvement suggestions from Lorenzo. v3->v4: 1. Care to be taken to move purely within a VMA, in other words this check in call_align_down(): if (vma->vm_start != addr_masked) return false; As an example of why this is needed: Consider the following range which is 2MB aligned and is a part of a larger 10MB range which is not shown. Each character is 256KB below making the source and destination 2MB each. The lower case letters are moved (s to d) and the upper case letters are not moved. |DDDDddddSSSSssss| If we align down 'ssss' to start from the 'SSSS', we will end up destroying SSSS. The above if statement prevents that and I verified it. I also added a test for this in the last patch. 2. Handle the stack case separately. We do not care about #1 for stack movement because the 'SSSS' does not matter during this move. Further we need to do this to prevent the stack move warning. if (!for_stack && vma->vm_start <= addr_masked) return false; v2->v3: 1. Masked address was stored in int, fixed it to unsigned long to avoid truncation. 2. We now handle moves happening purely within a VMA, a new test is added to handle this. 3. More code comments. v1->v2: 1. Trigger the optimization for mremaps smaller than a PMD. I tested by tracing that it works correctly. 2. Fix issue with bogus return value found by Linus if we broke out of the above loop for the first PMD itself. v1: Initial RFC. Joel Fernandes (1): selftests: mm: Add a test for moving from an offset from start of mapping Joel Fernandes (Google) (6): mm/mremap: Optimize the start addresses in move_page_tables() mm/mremap: Allow moves within the same VMA for stack moves selftests: mm: Fix failure case when new remap region was not found selftests: mm: Add a test for mutually aligned moves > PMD size selftests: mm: Add a test for remapping to area immediately after existing mapping selftests: mm: Add a test for remapping within a range fs/exec.c | 2 +- include/linux/mm.h | 2 +- mm/mremap.c | 73 +++++- tools/testing/selftests/mm/mremap_test.c | 301 +++++++++++++++++++---- 4 files changed, 329 insertions(+), 49 deletions(-) -- 2.42.0.283.g2d96d420d3-goog

2 years

5
14
0 0

[PATCH 1/1] tools/testing/selftests/iommu:Fixed spelling errors in comments

by GuokaiXu

From c4e404036e0a7ffcaedc5760bee234713ccfe4a4 Mon Sep 17 00:00:00 2001 From: GuokaiXu <xuguokai(a)ucas.com.cn> Date: Mon, 4 Sep 2023 10:18:04 +0800 Subject: [PATCH 1/1] Fix the spelling errors in comments Signed-off-by: GuokaiXu <xuguokai(a)ucas.com.cn> --- tools/testing/selftests/iommu/iommufd.c | 2 +- tools/testing/selftests/iommu/iommufd_fail_nth.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/iommu/iommufd.c b/tools/testing/selftests/iommu/iommufd.c index 33d08600be13..b7249ffc6750 100644 --- a/tools/testing/selftests/iommu/iommufd.c +++ b/tools/testing/selftests/iommu/iommufd.c @@ -1729,7 +1729,7 @@ TEST_F(vfio_compat_mock_domain, map) ASSERT_EQ(0, ioctl(self->fd, VFIO_IOMMU_UNMAP_DMA, &unmap_cmd)); ASSERT_EQ(BUFFER_SIZE, unmap_cmd.size); - /* UNMAP_FLAG_ALL requres 0 iova/size */ + /* UNMAP_FLAG_ALL requires 0 iova/size */ ASSERT_EQ(0, ioctl(self->fd, VFIO_IOMMU_MAP_DMA, &map_cmd)); unmap_cmd.flags = VFIO_DMA_UNMAP_FLAG_ALL; EXPECT_ERRNO(EINVAL, ioctl(self->fd, VFIO_IOMMU_UNMAP_DMA, &unmap_cmd)); diff --git a/tools/testing/selftests/iommu/iommufd_fail_nth.c b/tools/testing/selftests/iommu/iommufd_fail_nth.c index a220ca2a689d..36e7aa4f615c 100644 --- a/tools/testing/selftests/iommu/iommufd_fail_nth.c +++ b/tools/testing/selftests/iommu/iommufd_fail_nth.c @@ -105,7 +105,7 @@ static bool fail_nth_next(struct __test_metadata *_metadata, /* * This is just an arbitrary limit based on the current kernel - * situation. Changes in the kernel can dramtically change the number of + * situation. Changes in the kernel can dramatically change the number of * required fault injection sites, so if this hits it doesn't * necessarily mean a test failure, just that the limit has to be made * bigger. -- 2.25.1

2 years

2
1
0 0

[PATCH RFC v2] selftests/nolibc: don't embed initramfs into kernel image

by Thomas Weißschuh

When the initramfs is embedded into the kernel each rebuild of it will trigger a full kernel relink and all the expensive postprocessing steps. Currently nolibc-test and therefore the initramfs are always rebuild, even without source changes, leading to lots of slow kernel relinks. Instead of linking the initramfs into the kernel assemble it manually and pass it explicitly to qemu. This avoids all of the kernel relinks. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Currently the nolibc testsuite embeds the test executable into a kernel image with CONFIG_INITRAMFS_SOURCE. This forces a full kernel relink everytime the test executable is updated. This relinking step dominates the test cycle. It is slower than building and running the test in qemu together. With a bit of Makefile-shuffling the relinking can be avoided. --- Changes in v2: - avoid need to modify top-level Makefile - drop patch removing "rerun" target - add kernel-standalone target - Link to v1: https://lore.kernel.org/r/20230916-nolibc-initramfs-v1-0-4416ecedca6d@weiss… --- tools/testing/selftests/nolibc/Makefile | 42 ++++++++++++++++++++------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 689658f81a19..ee6a9ad28cfd 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -131,18 +131,20 @@ REPORT ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++ help: @echo "Supported targets under selftests/nolibc:" - @echo " all call the \"run\" target below" - @echo " help this help" - @echo " sysroot create the nolibc sysroot here (uses \$$ARCH)" - @echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)" - @echo " libc-test build an executable using the compiler's default libc instead" - @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)" - @echo " initramfs prepare the initramfs with nolibc-test" - @echo " defconfig create a fresh new default config (uses \$$XARCH)" - @echo " kernel (re)build the kernel with the initramfs (uses \$$XARCH)" - @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)" - @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)" - @echo " clean clean the sysroot, initramfs, build and output files" + @echo " all call the \"run\" target below" + @echo " help this help" + @echo " sysroot create the nolibc sysroot here (uses \$$ARCH)" + @echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)" + @echo " libc-test build an executable using the compiler's default libc instead" + @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)" + @echo " initramfs.cpio prepare the initramfs archive with nolibc-test" + @echo " initramfs prepare the initramfs tree with nolibc-test" + @echo " defconfig create a fresh new default config (uses \$$XARCH)" + @echo " kernel (re)build the kernel (uses \$$XARCH)" + @echo " kernel-standalone (re)build the kernel with the initramfs (uses \$$XARCH)" + @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)" + @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)" + @echo " clean clean the sysroot, initramfs, build and output files" @echo "" @echo "The output file is \"run.out\". Test ranges may be passed using \$$TEST." @echo "" @@ -195,6 +197,9 @@ run-user: nolibc-test $(Q)qemu-$(QEMU_ARCH) ./nolibc-test > "$(CURDIR)/run.out" || : $(Q)$(REPORT) $(CURDIR)/run.out +initramfs.cpio: kernel nolibc-test + $(QUIET_GEN)echo 'file /init nolibc-test 755 0 0' | $(srctree)/usr/gen_init_cpio - > initramfs.cpio + initramfs: nolibc-test $(QUIET_MKDIR)mkdir -p initramfs $(call QUIET_INSTALL, initramfs/init) @@ -203,17 +208,20 @@ initramfs: nolibc-test defconfig: $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) mrproper $(DEFCONFIG) prepare -kernel: initramfs +kernel: + $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) + +kernel-standalone: initramfs $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs # run the tests after building the kernel -run: kernel - $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" +run: kernel initramfs.cpio + $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -initrd initramfs.cpio -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" $(Q)$(REPORT) $(CURDIR)/run.out # re-run the tests from an existing kernel rerun: - $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" + $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(srctree)/$(IMAGE)" -initrd initramfs.cpio -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" $(Q)$(REPORT) $(CURDIR)/run.out # report with existing test log @@ -227,6 +235,8 @@ clean: $(Q)rm -f nolibc-test $(call QUIET_CLEAN, libc-test) $(Q)rm -f libc-test + $(call QUIET_CLEAN, initramfs.cpio) + $(Q)rm -rf initramfs.cpio $(call QUIET_CLEAN, initramfs) $(Q)rm -rf initramfs $(call QUIET_CLEAN, run.out) --- base-commit: 3f79a57865b33f49fdae6655510bd27c8e6610e0 change-id: 20230916-nolibc-initramfs-4fd00eac3256 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 years

3
2
0 0

[RFC PATCH iproute2-next v4] iplink: bridge: Add sup20230919-fdb_limit-v4-0-1a2a59694d67@avm.der bridge FDB learning limits

by Johannes Nixdorf

Support setting the FDB limit through ip link. The arguments is: - fdb_max_learned: A 32-bit unsigned integer specifying the maximum number of learned FDB entries, with 0 disabling the limit. Also support reading back the current number of learned FDB entries in the bridge by this count. The returned value's name is: - fdb_n_learned: A 32-bit unsigned integer specifying the current number of learned FDB entries. Example: # ip -d -j -p link show br0 [ { ... "linkinfo": { "info_kind": "bridge", "info_data": { ... "fdb_n_learned": 2, "fdb_max_learned": 0, ... } }, ... } ] # ip link set br0 type bridge fdb_max_learned 1024 # ip -d -j -p link show br0 [ { ... "linkinfo": { "info_kind": "bridge", "info_data": { ... "fdb_n_learned": 2, "fdb_max_learned": 1024, ... } }, ... } ] Signed-off-by: Johannes Nixdorf <jnixdorf-oss(a)avm.de> --- I will resend this mail as non-rfc after the kernel UAPI changes landed. Link to the kernel changes: https://lore.kernel.org/netdev/20230919-fdb_limit-v4-0-39f0293807b8@avm.de/ --- Changes in v4: - Removed _entries from the names. (from review) - Removed the UAPI change, to be synced from linux separately by the maintainer. (from review) For local testing e.g. `make CCOPTS="-O2 -pipe -I${path_to_dev_kernel_headers}"` works as a workaround. - Downgraded to an RFC until the kernel changes land. - Link to v3: https://lore.kernel.org/netdev/20230905-fdb_limit-v3-1-34bb124556d8@avm.de/ Changes in v3: - Properly split the net-next and iproute2-next threads. (from review) - Changed to *_n_* instead of *_cur_*. (from review) - Use strcmp() instead of matches(). (from review) - Made names in code and documentation consistent. (from review) - Various documentation fixes. (from review) - Link to v2: https://lore.kernel.org/netdev/20230619071444.14625-1-jnixdorf-oss@avm.de/ Changes in v2: - Sent out the first corresponding iproute2 patches. - Link to v1: https://lore.kernel.org/netdev/20230515085046.4457-1-jnixdorf-oss@avm.de/ --- ip/iplink_bridge.c | 21 +++++++++++++++++++++ man/man8/ip-link.8.in | 10 ++++++++++ 2 files changed, 31 insertions(+) diff --git a/ip/iplink_bridge.c b/ip/iplink_bridge.c index 462075295308..6b70ffbb6f5f 100644 --- a/ip/iplink_bridge.c +++ b/ip/iplink_bridge.c @@ -34,6 +34,7 @@ static void print_explain(FILE *f) " [ group_fwd_mask MASK ]\n" " [ group_address ADDRESS ]\n" " [ no_linklocal_learn NO_LINKLOCAL_LEARN ]\n" + " [ fdb_max_learned FDB_MAX_LEARNED ]\n" " [ vlan_filtering VLAN_FILTERING ]\n" " [ vlan_protocol VLAN_PROTOCOL ]\n" " [ vlan_default_pvid VLAN_DEFAULT_PVID ]\n" @@ -168,6 +169,14 @@ static int bridge_parse_opt(struct link_util *lu, int argc, char **argv, bm.optval |= no_ll_learn_bit; else bm.optval &= ~no_ll_learn_bit; + } else if (strcmp(*argv, "fdb_max_learned") == 0) { + __u32 fdb_max_learned; + + NEXT_ARG(); + if (get_u32(&fdb_max_learned, *argv, 0)) + invarg("invalid fdb_max_learned", *argv); + + addattr32(n, 1024, IFLA_BR_FDB_MAX_LEARNED, fdb_max_learned); } else if (matches(*argv, "fdb_flush") == 0) { addattr(n, 1024, IFLA_BR_FDB_FLUSH); } else if (matches(*argv, "vlan_default_pvid") == 0) { @@ -544,6 +553,18 @@ static void bridge_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[]) if (tb[IFLA_BR_GC_TIMER]) _bridge_print_timer(f, "gc_timer", tb[IFLA_BR_GC_TIMER]); + if (tb[IFLA_BR_FDB_N_LEARNED]) + print_uint(PRINT_ANY, + "fdb_n_learned", + "fdb_n_learned %u ", + rta_getattr_u32(tb[IFLA_BR_FDB_N_LEARNED])); + + if (tb[IFLA_BR_FDB_MAX_LEARNED]) + print_uint(PRINT_ANY, + "fdb_max_learned", + "fdb_max_learned %u ", + rta_getattr_u32(tb[IFLA_BR_FDB_MAX_LEARNED])); + if (tb[IFLA_BR_VLAN_DEFAULT_PVID]) print_uint(PRINT_ANY, "vlan_default_pvid", diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in index 7365d0c6b14f..e82b2dbb0070 100644 --- a/man/man8/ip-link.8.in +++ b/man/man8/ip-link.8.in @@ -1630,6 +1630,8 @@ the following additional arguments are supported: ] [ .BI no_linklocal_learn " NO_LINKLOCAL_LEARN " ] [ +.BI fdb_max_learned " FDB_MAX_LEARNED " +] [ .BI vlan_filtering " VLAN_FILTERING " ] [ .BI vlan_protocol " VLAN_PROTOCOL " @@ -1741,6 +1743,14 @@ or off When disabled, the bridge will not learn from link-local frames (default: enabled). +.BI fdb_max_learned " FDB_MAX_LEARNED " +- set the maximum number of learned FDB entries. If +.RI ( FDB_MAX_LEARNED " == 0) " +the feature is disabled. Default is +.BR 0 . +.I FDB_MAX_LEARNED +is a 32bit unsigned integer. + .BI vlan_filtering " VLAN_FILTERING " - turn VLAN filtering on .RI ( VLAN_FILTERING " > 0) " --- base-commit: c31fd80a2268c0b1b77e1d65827003a2327315b8 change-id: 20230905-fdb_limit-ace1467c6a84 Best regards, -- Johannes Nixdorf <jnixdorf-oss(a)avm.de>

2 years

1
0
0 0

[RFC PATCH] kunit: Add a macro to wrap a deferred action function

by David Gow

KUnit's deferred action API accepts a void(*)(void *) function pointer which is called when the test is exited. However, we very frequently want to use existing functions which accept a single pointer, but which may not be of type void*. While this is probably dodgy enough to be on the wrong side of the C standard, it's been often used for similar callbacks, and gcc's -Wcast-function-type seems to ignore cases where the only difference is the type of the argument, assuming it's compatible (i.e., they're both pointers to data). However, clang 16 has introduced -Wcast-function-type-strict, which no longer permits any deviation in function pointer type. This seems to be because it'd break CFI, which validates the type of function calls. This rather ruins our attempts to cast functions to defer them, and leaves us with a few options: 1. Stick our fingers in our ears an ignore the warning. (It's worked so far, but probably isn't the right thing to do.) 2. Find some horrible way of casting which fools the compiler into letting us do the cast. (It'd still break CFI, though.) 3. Disable the warning, and CFI for this function. This isn't optimal, but may make sense for test-only code. However, I think we'd have to do this for every function called, not just the caller, so maybe it's not practical. 4. Manually write wrappers around any such functions. This is ugly (do we really want two copies of each function, one of which has no type info and just forwards to the other). It could get repetitive. 5. Generate these wrappers with a macro. That's what this patch does. I'm broadly okay with any of the options above, though whatever we go with will no doubt require some bikeshedding of details (should these wrappers be public, do we dedupe them, etc). Thoughts? Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Signed-off-by: David Gow <davidgow(a)google.com> --- I finally got around to setting up clang 16 to look into these warnings: lib/kunit/test.c:764:38: warning: cast from 'void (*)(const void *)' to 'kunit_action_t *' (aka 'void (*)(void *)') converts to incompatible function type [-Wcast-function-type-strict] if (kunit_add_action_or_reset(test, (kunit_action_t *)kfree, data) != 0) ^~~~~~~~~~~~~~~~~~~~~~~ lib/kunit/test.c:776:29: warning: cast from 'void (*)(const void *)' to 'kunit_action_t *' (aka 'void (*)(void *)') converts to incompatible function type [-Wcast-function-type-strict] kunit_release_action(test, (kunit_action_t *)kfree, (void *)ptr); ^~~~~~~~~~~~~~~~~~~~~~~ 2 warnings generated. It's probably something which needs fixing with wrappers, not with the "just keep casting things until the compiler forgets" strategy. There are few enough uses of kunit_add_action() that now's the time to change things if we want to fix these warnings (and, I guess, work with CFI). This patch uses an ugly macro, but we're definitely still at the point where doing this by hand might make more sense. Don't take this exact patch too seriously: it's mostly a discussion starter so we can decide on a plan. Cheers, -- David --- include/kunit/resource.h | 9 +++++++++ lib/kunit/executor_test.c | 7 +++---- lib/kunit/test.c | 6 ++++-- 3 files changed, 16 insertions(+), 6 deletions(-) diff --git a/include/kunit/resource.h b/include/kunit/resource.h index c7383e90f5c9..4110e13970dc 100644 --- a/include/kunit/resource.h +++ b/include/kunit/resource.h @@ -390,6 +390,15 @@ void kunit_remove_resource(struct kunit *test, struct kunit_resource *res); /* A 'deferred action' function to be used with kunit_add_action. */ typedef void (kunit_action_t)(void *); +/* We can't cast function pointers to kunit_action_t if CFI is enabled. */ +#define KUNIT_DEFINE_ACTION_WRAPPER(wrapper, orig, arg_type) \ + static void wrapper(void *in) \ + { \ + arg_type arg = (arg_type)in; \ + orig(arg); \ + } + + /** * kunit_add_action() - Call a function when the test ends. * @test: Test case to associate the action with. diff --git a/lib/kunit/executor_test.c b/lib/kunit/executor_test.c index b4f6f96b2844..14ac64f4f71b 100644 --- a/lib/kunit/executor_test.c +++ b/lib/kunit/executor_test.c @@ -256,9 +256,8 @@ kunit_test_suites(&executor_test_suite); /* Test helpers */ -/* Use the resource API to register a call to kfree(to_free). - * Since we never actually use the resource, it's safe to use on const data. - */ +KUNIT_DEFINE_ACTION_WRAPPER(kfree_action_wrapper, kfree, const void *) +/* Use the resource API to register a call to kfree(to_free). */ static void kfree_at_end(struct kunit *test, const void *to_free) { /* kfree() handles NULL already, but avoid allocating a no-op cleanup. */ @@ -266,7 +265,7 @@ static void kfree_at_end(struct kunit *test, const void *to_free) return; kunit_add_action(test, - (kunit_action_t *)kfree, + kfree_action_wrapper, (void *)to_free); } diff --git a/lib/kunit/test.c b/lib/kunit/test.c index 421f13981412..41b7d9a090fb 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -804,6 +804,8 @@ static struct notifier_block kunit_mod_nb = { }; #endif +KUNIT_DEFINE_ACTION_WRAPPER(kfree_action_wrapper, kfree, const void *) + void *kunit_kmalloc_array(struct kunit *test, size_t n, size_t size, gfp_t gfp) { void *data; @@ -813,7 +815,7 @@ void *kunit_kmalloc_array(struct kunit *test, size_t n, size_t size, gfp_t gfp) if (!data) return NULL; - if (kunit_add_action_or_reset(test, (kunit_action_t *)kfree, data) != 0) + if (kunit_add_action_or_reset(test, kfree_action_wrapper, data) != 0) return NULL; return data; @@ -825,7 +827,7 @@ void kunit_kfree(struct kunit *test, const void *ptr) if (!ptr) return; - kunit_release_action(test, (kunit_action_t *)kfree, (void *)ptr); + kunit_release_action(test, kfree_action_wrapper, (void *)ptr); } EXPORT_SYMBOL_GPL(kunit_kfree); -- 2.42.0.459.ge4e396fd5e-goog

2 years

3
2
0 0

[PATCH 0/2] Fix issues observed with selftests/amd-pstate

by Swapnil Sapkal

This series fixes the issues observed with selftests/amd-pstate while running performance comparison tests with different governors. First patch changes relative paths with absolute path and also change it with correct path wherever it is broken. The second patch fixes error observed while importing the Gnuplot in intel_pstate_tracer.py. Swapnil Sapkal (2): selftests/amd-pstate: Fix broken paths to run workloads in amd-pstate-ut tools/power/x86/intel_pstate_tracer: Use pygnuplot package for Gnuplot .../x86/amd_pstate_tracer/amd_pstate_trace.py | 3 +-- .../intel_pstate_tracer.py | 4 ++-- .../testing/selftests/amd-pstate/gitsource.sh | 14 +++++++----- tools/testing/selftests/amd-pstate/run.sh | 22 +++++++++++++------ tools/testing/selftests/amd-pstate/tbench.sh | 4 ++-- 5 files changed, 29 insertions(+), 18 deletions(-) -- 2.34.1

2 years

4
7
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2023