July 2023 - Linux-kselftest-mirror

[PATCH v3 00/12] selftests/nolibc: add minimal kernel config support - part1

by Zhangjin Wu

Hi, Willy Most of the suggestions of v2 [1] have been applied in this v3 revision, except the local menuconfig and mrproper targets, as explained in [2]. A fresh run with tinyconfig for ppc, ppc64 and ppc64le: $ for arch in ppc ppc64 ppc64le; do \ mkdir -p $PWD/kernel-$arch; time make defconfig run DEFCONFIG=tinyconfig ARCH=$arch O=$PWD/kernel-$arch RUN_OUT=$PWD/run.$arch.out; done rerun for ppc, ppc64 and ppc64le: $ for arch in ppc ppc64 ppc64le; do \ make rerun ARCH=$arch O=$PWD/kernel-$arch RUN_OUT=$PWD/run.$arch.out; done Running /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/kernel-ppc/vmlinux on qemu-system-ppc >> [ppc] Kernel command line: console=ttyS0 panic=-1 printk: console [ttyS0] enabled Run /init as init process Running test 'startup' Running test 'syscall' Running test 'stdlib' Running test 'vfprintf' Running test 'protection' Leaving init with final status: 0 reboot: Power down powered off, test finish qemu-system-ppc: terminating on signal 15 from pid 190248 () 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.ppc.out Running /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/kernel-ppc64/vmlinux on qemu-system-ppc64 Linux version 6.4.0+ (ubuntu@linux-lab) (powerpc64le-linux-gnu-gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 SMP Fri Jul 28 01:40:55 CST 2023 Kernel command line: console=hvc0 panic=-1 printk: console [hvc0] enabled printk: console [hvc0] enabled Run /init as init process Running test 'startup' Running test 'syscall' Running test 'stdlib' Running test 'vfprintf' Running test 'protection' Leaving init with final status: 0 reboot: Power down powered off, test finish 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.ppc64.out Running /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/kernel-ppc64le/arch/powerpc/boot/zImage on qemu-system-ppc64le Linux version 6.4.0+ (ubuntu@linux-lab) (powerpc64le-linux-gnu-gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 SMP Fri Jul 28 01:41:12 CST 2023 Kernel command line: console=hvc0 panic=-1 Run /init as init process Running test 'startup' Running test 'syscall' Running test 'stdlib' Running test 'vfprintf' Running test 'protection' Leaving init with final status: 0 reboot: Power down powered off, test finish 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning See all results in /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/run.ppc64le.out A fast report on existing test logs: $ for arch in ppc ppc64 ppc64le; do \ make report ARCH=$arch RUN_OUT=$PWD/run.$arch.out | grep status; \ done 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning Changes from v2 --> v3: * selftests/nolibc: allow report with existing test log selftests/nolibc: fix up O= option support selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc selftests/nolibc: tinyconfig: add extra common options No Change. * selftests/nolibc: add macros to reduce duplicated changes Remove REPORT_RUN_OUT and LOG_OUT. * selftests/nolibc: string the core targets Removed extconfig target from our v3 powerpc patchset [3], the operations have been merged into the defconfig target. Let kernel depends on $(KERNEL_CONFIG) instead of the removed extconfig. * selftests/nolibc: add menuconfig and mrproper for development like the other local nolibc targets, still require local menuconfig and mrproper targets for consistent usage with the same ARCH and no -C /path/to/srctree Merge them together to reduce duplicated entries. * selftests/nolibc: allow quit qemu-system when poweroff fails Enhance timeout logic with more expected strings print and detection about the booting of bios, kernel, init and test. Add a default 10 seconds of QEMU_TIMEOUT for every architecture to detect all of the potential boog hang or failed poweroff. * selftests/nolibc: customize QEMU_TIMEOUT for ppc64/ppc64le Reduce QEMU_TIMEOUT from 60 seconds to a more normal 15 and 20 seconds for ppc64 and ppc64le respectively. the main time cost is the slow bios used. * selftests/nolibc: tinyconfig: add support for 32/64-bit powerpc Rename the file names to shorter ones as suggestions from the powerpc patchset. * selftests/nolibc: speed up some targets with multiple jobs New to speed up with -j<N> by default. Best regards, Zhangjin --- [1]: https://lore.kernel.org/lkml/cover.1689759351.git.falcon@tinylab.org/ [2]: https://lore.kernel.org/lkml/20230727132418.117924-1-falcon@tinylab.org/ [3]: https://lore.kernel.org/lkml/8e9e5ac6283c6ec2ecf10a70ce55b219028497c1.16904… Zhangjin Wu (12): selftests/nolibc: allow report with existing test log selftests/nolibc: add macros to reduce duplicated changes selftests/nolibc: fix up O= option support selftests/nolibc: string the core targets selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc selftests/nolibc: add menuconfig and mrproper for development selftests/nolibc: allow quit qemu-system when poweroff fails selftests/nolibc: customize QEMU_TIMEOUT for ppc64/ppc64le selftests/nolibc: tinyconfig: add extra common options selftests/nolibc: tinyconfig: add support for 32/64-bit powerpc selftests/nolibc: speed up some targets with multiple jobs tools/testing/selftests/nolibc/Makefile | 102 ++++++++++++++---- .../selftests/nolibc/configs/common.config | 4 + .../selftests/nolibc/configs/ppc.config | 3 + .../selftests/nolibc/configs/ppc64.config | 3 + .../selftests/nolibc/configs/ppc64le.config | 4 + 5 files changed, 98 insertions(+), 18 deletions(-) create mode 100644 tools/testing/selftests/nolibc/configs/common.config create mode 100644 tools/testing/selftests/nolibc/configs/ppc64.config create mode 100644 tools/testing/selftests/nolibc/configs/ppc64le.config -- 2.25.1

1 year, 4 months

3
25
0 0

[PATCH v3 0/7] tools/nolibc: add 32/64-bit powerpc support

by Zhangjin Wu

Hi, Willy, Thomas v3 here is to fix up two issues introduced in v2 powerpc patchset [1]. - One is restore the wrongly removed '\' for a '\$$ARCH' - Another is add the missing $(ARCH).config for ppc, the default variant for powerpc is renamed to ppc in v2 (as discussed with Willy in [2]), but ppc.config is missing in v2 patchset, not sure why this happen, may a 'git clean -fdx .' is required to do a new test, just did it. Btw, the v3 tinyconfig-part1 for powerpc is ready, I will send it out soon. Best regards, Zhangjin --- [1]: https://lore.kernel.org/lkml/cover.1690373704.git.falcon@tinylab.org/ [2]: https://lore.kernel.org/lkml/ZL9leVOI25S2+0+g@1wt.eu/ Zhangjin Wu (7): tools/nolibc: add support for powerpc tools/nolibc: add support for powerpc64 selftests/nolibc: add extra configs customize support selftests/nolibc: add XARCH and ARCH mapping support selftests/nolibc: add test support for ppc selftests/nolibc: add test support for ppc64le selftests/nolibc: add test support for ppc64 tools/include/nolibc/arch-powerpc.h | 202 ++++++++++++++++++ tools/include/nolibc/arch.h | 2 + tools/testing/selftests/nolibc/Makefile | 46 +++- .../selftests/nolibc/configs/ppc.config | 3 + 4 files changed, 246 insertions(+), 7 deletions(-) create mode 100644 tools/include/nolibc/arch-powerpc.h create mode 100644 tools/testing/selftests/nolibc/configs/ppc.config -- 2.25.1

1 year, 4 months

3
20
0 0

[PATCH 0/2] tools/nolibc: add pipe() and its testcase

by Yuan Tan

Hi, Zhangjin and I are working on a tiny shell with nolibc. This patch enables the missing pipe() with its testcase. Thanks. Yuan Tan (2): tools/nolibc: add pipe() support selftests/nolibc: add testcase for pipe. tools/include/nolibc/sys.h | 17 ++++++++++ tools/testing/selftests/nolibc/nolibc-test.c | 34 ++++++++++++++++++++ 2 files changed, 51 insertions(+) -- 2.39.2

1 year, 4 months

4
12
0 0

Re: [PATCH v5] selftests: rtc: Improve rtctest error handling

by Greg KH

Hi, This is the semi-friendly patch-bot of Greg Kroah-Hartman. Markus, you seem to have sent a nonsensical or otherwise pointless review comment to a patch submission on a Linux kernel developer mailing list. I strongly suggest that you not do this anymore. Please do not bother developers who are actively working to produce patches and features with comments that, in the end, are a waste of time. Patch submitter, please ignore Markus's suggestion; you do not need to follow it at all. The person/bot/AI that sent it is being ignored by almost all Linux kernel maintainers for having a persistent pattern of behavior of producing distracting and pointless commentary, and inability to adapt to feedback. Please feel free to also ignore emails from them. thanks, greg k-h's patch email bot

1 year, 4 months

1
0
0 0

[PATCH 0/2] mm/damon/core: fix unitialized memory error from

by SeongJae Park

damos_new_filter() is returning a damos_filter struct without initializing its ->list field. And the users of the function uses the struct without initializing the field. As a result, uninitialized memory access error is possible. Actually, a kernel NULL pointer dereference BUG can be triggered using DAMON user-space tool, like below. # damo start --damos_action stat --damos_filter anon matching # damo tune --damos_action stat --damos_filter anon matching --damos_filter anon nomatching # dmesg [...] [ 36.908136] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 36.910483] #PF: supervisor write access in kernel mode [ 36.912238] #PF: error_code(0x0002) - not-present page [ 36.913415] PGD 0 P4D 0 [ 36.913978] Oops: 0002 [#1] PREEMPT SMP PTI [ 36.914878] CPU: 32 PID: 1335 Comm: kdamond.0 Not tainted 6.5.0-rc3-mm-unstable-damon+ #1 [ 36.916621] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 36.919051] RIP: 0010:damos_destroy_filter (include/linux/list.h:114 include/linux/list.h:137 include/linux/list.h:148 mm/damon/core.c:345 mm/damon/core.c:355) [...] [ 36.938247] Call Trace: [ 36.938721] <TASK> [...] [ 36.950064] ? damos_destroy_filter (include/linux/list.h:114 include/linux/list.h:137 include/linux/list.h:148 mm/damon/core.c:345 mm/damon/core.c:355) [ 36.950883] ? damon_sysfs_set_scheme_filters.isra.0 (mm/damon/sysfs-schemes.c:1573) [ 36.952019] damon_sysfs_set_schemes (mm/damon/sysfs-schemes.c:1674 mm/damon/sysfs-schemes.c:1686) [ 36.952875] damon_sysfs_apply_inputs (mm/damon/sysfs.c:1312 mm/damon/sysfs.c:1298) [ 36.953757] ? damon_pa_check_accesses (mm/damon/paddr.c:168 mm/damon/paddr.c:179) [ 36.954648] damon_sysfs_cmd_request_callback (mm/damon/sysfs.c:1329 mm/damon/sysfs.c:1359) [...] The first patch of this patchset fixes the bug by initializing the field in damos_new_filter(). The second patch adds a unit test for the problem. Note that the second patch Cc stable@ without Fixes: tag, since it would be better to be ingested together for avoiding any future regression. SeongJae Park (2): mm/damon/core: initialize damo_filter->list from damos_new_filter() mm/damon/core-test: add a test for damos_new_filter() mm/damon/core-test.h | 13 +++++++++++++ mm/damon/core.c | 1 + 2 files changed, 14 insertions(+) -- 2.25.1

1 year, 4 months

1
1
0 0

[PATCH v2 00/14] selftests/nolibc: add minimal kernel config support - part1

by Zhangjin Wu

Hi, Willy, Thomas Here is the first part of v2 of our tinyconfig support for nolibc-test [1], the patchset subject is reserved as before. As discussed in v1 thread [1], to easier the review progress, the whole tinyconfig support is divided into several parts, mainly by architecture, here is the first part, include basic preparation and powerpc example. This patchset should be applied after the 32/64-bit powerpc support [2], exactly these two are required by us: * selftests/nolibc: add extra config file customize support * selftests/nolibc: add XARCH and ARCH mapping support In this patchset, we firstly add some misc preparations and at last add the tinyconfig target and use powerpc as the first example. Tests: // powerpc run-user $ for arch in powerpc powerpc64 powerpc64le; do \ rm -rf $PWD/kernel-$arch; \ mkdir -p $PWD/kernel-$arch; \ make run-user XARCH=$arch O=$PWD/kernel-$arch RUN_OUT=$PWD/run.$arch.out | grep "status: "; \ done 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning // powerpc run $ for arch in powerpc powerpc64 powerpc64le; do \ rm -rf $PWD/kernel-$arch; \ mkdir -p $PWD/kernel-$arch; \ make tinyconfig run XARCH=$arch O=$PWD/kernel-$arch RUN_OUT=$PWD/run.$arch.out; \ done $ for arch in powerpc powerpc64 powerpc64le; do \ make report XARCH=$arch O=$PWD/kernel-$arch RUN_OUT=$PWD/run.$arch.out | grep "status: "; \ done 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning // the others, randomly choose some $ make run-user XARCH=arm O=$PWD/kernel-arm RUN_OUT=$PWD/run.arm.out CROSS_COMPILE=arm-linux-gnueabi- | grep status: 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning $ make run-user XARCH=x86_64 O=$PWD/kernel-arm RUN_OUT=$PWD/run.x86_64.out CROSS_COMPILE=x86_64-linux-gnu- | grep status: 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning $ make run-libc-test | grep status: 165 test(s): 153 passed, 12 skipped, 0 failed => status: warning // x86_64, require noapic kernel command line option for old qemu-system-x86_64 (v4.2.1) $ make run XARCH=x86_64 O=$PWD/kernel-x86_64 RUN_OUT=$PWD/run.x86_64.out CROSS_COMPILE=x86_64-linux-gnu- | grep status $ make rerun XARCH=x86_64 O=$PWD/kernel-x86_64 RUN_OUT=$PWD/run.x86_64.out CROSS_COMPILE=x86_64-linux-gnu- | grep status 165 test(s): 159 passed, 6 skipped, 0 failed => status: warning tinyconfig mainly targets as a time-saver, the misc preparations service for the same goal, let's take a look: * selftests/nolibc: allow report with existing test log Like rerun without rebuild, Add report (without rerun) to summarize the existing test log, this may work perfectly with the 'grep status' * selftests/nolibc: add macros to enhance maintainability Several macros are added to dedup the shared code to shrink lines and easier the maintainability The macros are added just before the using area to avoid code change conflicts in the future. * selftests/nolibc: print running log to screen Enable logging to let developers learn what is happening at the first glance, without the need to edit the Makefile and rerun it. These helps a lot when there is a long-time running, a failed poweroff or even a forever hang. For test summmary, the 'grep status' can be used together with the standalone report target. * selftests/nolibc: fix up O= option support With objtree instead srctree for .config and IMAGE, now, O= works. Using O=$PWD/kernel-$arch avoid the mrproer for every build. * selftests/nolibc: add menuconfig for development Allow manually tuning some options, mainly for a new architecture porting. * selftests/nolibc: add mrproper for development selftests/nolibc: defconfig: remove mrproper target Split the mrproper target out of defconfig, when with O=, mrproper is not required by defconfig, but reserve it for the other use scenes. * selftests/nolibc: string the core targets Allow simply 'make run' instead of 'make defconfig; make extconfig; make kernel; make run'. * selftests/nolibc: allow quit qemu-system when poweroff fails When poweroff fails, allow exit while detects the power off string from output or the wait time is too long (specified by QEMU_TIMEOUT). This helps the boards who have no poweroff support or the kernel not enable the poweroff options (mainly for tinyconfig). * selftests/nolibc: allow customize CROSS_COMPILE by architecture * selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc This further saves a CROSS_COMPILE option for 'make run', it is very important when iterates all of the supported architectures and the compilers are not just prefixed with the XARCH variable. For example, binary of big endian powerpc64 can be compiled with powerpc64le-linux-gnu-, but the prefix is powerpc64le. Even if the pre-customized compiler not exist, we can configure CROSS_COMPILE_<ARCH> before the test loop to use the code. * selftests/nolibc: add tinyconfig target selftests/nolibc: tinyconfig: add extra common options selftests/nolibc: tinyconfig: add support for 32/64-bit powerpc Here is the first architecture(and its variants) support tinyconfig. powerpc is actually a very good architecture, for it has 'various' variants for test. Best regards, Zhangjin --- [1]: https://lore.kernel.org/lkml/cover.1687706332.git.falcon@tinylab.org/ [2]: https://lore.kernel.org/lkml/cover.1689713175.git.falcon@tinylab.org/ Zhangjin Wu (14): selftests/nolibc: allow report with existing test log selftests/nolibc: add macros to enhance maintainability selftests/nolibc: print running log to screen selftests/nolibc: fix up O= option support selftests/nolibc: add menuconfig for development selftests/nolibc: add mrproper for development selftests/nolibc: defconfig: remove mrproper target selftests/nolibc: string the core targets selftests/nolibc: allow quit qemu-system when poweroff fails selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc selftests/nolibc: add tinyconfig target selftests/nolibc: tinyconfig: add extra common options selftests/nolibc: tinyconfig: add support for 32/64-bit powerpc tools/testing/selftests/nolibc/Makefile | 102 ++++++++++++++---- .../selftests/nolibc/configs/common.config | 4 + .../selftests/nolibc/configs/powerpc.config | 3 + .../selftests/nolibc/configs/powerpc64.config | 3 + .../nolibc/configs/powerpc64le.config | 4 + 5 files changed, 98 insertions(+), 18 deletions(-) create mode 100644 tools/testing/selftests/nolibc/configs/common.config create mode 100644 tools/testing/selftests/nolibc/configs/powerpc64.config create mode 100644 tools/testing/selftests/nolibc/configs/powerpc64le.config -- 2.25.1

1 year, 5 months

2
39
0 0

[PATCH 0/3] kunit: Expose some built-in features to modules

by Janusz Krzysztofik

Submit the top-level headers also from the kunit test module notifier initialization callback, so external tools that are parsing dmesg for kunit test output are able to tell how many test suites should be expected and whether to continue parsing after complete output from the first test suite is collected. Extend kunit module notifier initialization callback with a processing path for only listing the tests provided by a module if the kunit action parameter is set to "list", so external tools can obtain a list of test cases to be executed in advance and can make a better job on assigning kernel messages interleaved with kunit output to specific tests. Use test filtering functions in kunit module notifier callback functions, so external tools are able to execute individual test cases from kunit test modules in order to still better isolate their potential impact on kernel messages that appear interleaved with output from other tests. Janusz Krzysztofik (3): kunit: Report the count of test suites in a module kunit: Make 'list' action available to kunit test modules kunit: Allow kunit test modules to use test filtering include/kunit/test.h | 14 +++++++++++ lib/kunit/executor.c | 51 ++++++++++++++++++++++----------------- lib/kunit/test.c | 57 +++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 99 insertions(+), 23 deletions(-) -- 2.41.0

1 year, 5 months

2
8
0 0

[PATCH -next v2] kunit: fix wild-memory-access bug in kunit_filter_suites()

by Ruan Jinjie

As for kunit_filter_suites(), When the filters arg = NULL, such as the call of kunit_filter_suites(&suite_set, "suite2", NULL, NULL, &err) in filter_suites_test() tese case in kunit, both filter_count and parsed_filters will not be initialized. So it's possible to enter kunit_filter_attr_tests(), and the use of uninitialized parsed_filters will cause below wild-memory-access. RIP: 0010:kunit_filter_suites+0x780/0xa40 Code: fe ff ff e8 42 87 4d ff 41 83 c6 01 49 83 c5 10 49 89 dc 44 39 74 24 50 0f 8e 81 fe ff ff e8 27 87 4d ff 4c 89 e8 48 c1 e8 03 <66> 42 83 3c 38 00 0f 85 af 01 00 00 49 8b 75 00 49 8b 55 08 4c 89 RSP: 0000:ff1100010743fc38 EFLAGS: 00010203 RAX: 03fc4400041d0ff1 RBX: ff1100010389a900 RCX: ffffffff9f940ad9 RDX: ff11000107429740 RSI: 0000000000000000 RDI: ff110001037ec920 RBP: ff1100010743fd50 R08: 0000000000000000 R09: ffe21c0020e87f1e R10: 0000000000000003 R11: 0000000000032001 R12: ff110001037ec800 R13: 1fe2200020e87f8c R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100011b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff11000115201000 CR3: 0000000113066001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x26/0x30 ? kunit_filter_suites+0x779/0xa40 ? kunit_filter_suites+0x780/0xa40 ? kunit_filter_suites+0x779/0xa40 ? __pfx_kunit_filter_suites+0x10/0x10 ? __pfx_kfree+0x10/0x10 ? kunit_add_action_or_reset+0x3d/0x50 filter_suites_test+0x1b7/0x440 ? __pfx_filter_suites_test+0x10/0x10 ? __pfx___schedule+0x10/0x10 ? try_to_wake_up+0xa8e/0x1210 ? _raw_spin_lock_irqsave+0x86/0xe0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? set_cpus_allowed_ptr+0x7c/0xb0 kunit_try_run_case+0x119/0x270 ? __kthread_parkme+0xdc/0x160 ? __pfx_kunit_try_run_case+0x10/0x10 kunit_generic_run_threadfn_adapter+0x4e/0xa0 ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 kthread+0x2c7/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:kunit_filter_suites+0x780/0xa40 Code: fe ff ff e8 42 87 4d ff 41 83 c6 01 49 83 c5 10 49 89 dc 44 39 74 24 50 0f 8e 81 fe ff ff e8 27 87 4d ff 4c 89 e8 48 c1 e8 03 <66> 42 83 3c 38 00 0f 85 af 01 00 00 49 8b 75 00 49 8b 55 08 4c 89 RSP: 0000:ff1100010743fc38 EFLAGS: 00010203 RAX: 03fc4400041d0ff1 RBX: ff1100010389a900 RCX: ffffffff9f940ad9 RDX: ff11000107429740 RSI: 0000000000000000 RDI: ff110001037ec920 RBP: ff1100010743fd50 R08: 0000000000000000 R09: ffe21c0020e87f1e R10: 0000000000000003 R11: 0000000000032001 R12: ff110001037ec800 R13: 1fe2200020e87f8c R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100011b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff11000115201000 CR3: 0000000113066001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x1da00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Rebooting in 1 seconds.. Fixes: 529534e8cba3 ("kunit: Add ability to filter attributes") Signed-off-by: Ruan Jinjie <ruanjinjie(a)huawei.com> --- v2: - add fixes tag --- lib/kunit/executor.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 483f7b7873a7..5b5bed1efb93 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -125,7 +125,8 @@ static struct suite_set kunit_filter_suites(const struct suite_set *suite_set, char *filter_action, int *err) { - int i, j, k, filter_count; + int i, j, k; + int filter_count = 0; struct kunit_suite **copy, *filtered_suite, *new_filtered_suite; struct suite_set filtered; struct kunit_glob_filter parsed_glob; -- 2.34.1

1 year, 5 months

3
2
0 0

[PATCH v1 0/8] tools/nolibc: add 32/64-bit powerpc support

by Zhangjin Wu

Hi, Willy Here is the powerpc support, includes 32-bit big-endian powerpc, 64-bit little endian and big endian powerpc. All of them passes run-user with the default powerpc toolchain from Ubuntu 20.04: $ make run-user DEFCONFIG=tinyconfig XARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- | grep status 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning $ make run-user DEFCONFIG=tinyconfig XARCH=powerpc64 CROSS_COMPILE=powerpc64le-linux-gnu- | grep status 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning $ make run-user DEFCONFIG=tinyconfig XARCH=powerpc64le CROSS_COMPILE=powerpc64le-linux-gnu- | grep status 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning For the slow 'run' target, I have run with defconfig before, and just verified them via the fast tinyconfig + run with a new patch from next patchset, all of them passes: 165 test(s): 156 passed, 9 skipped, 0 failed => status: warning Note, the big endian crosstool powerpc64-linux-gcc from https://mirrors.edge.kernel.org/pub/tools/crosstool/ has been used to test both little endian and big endian powerpc64 too, both passed. Here simply explain what they are: * tools/nolibc: add support for powerpc tools/nolibc: add support for powerpc64 32-bit & 64-bit powerpc support of nolibc. * selftests/nolibc: select_null: fix up for big endian powerpc64 fix up a test case for big endian powerpc64. * selftests/nolibc: add extra config file customize support add extconfig target to allow enable extra config options via configs/<ARCH>.config applied suggestion from Thomas to use config files instead of config lines. * selftests/nolibc: add XARCH and ARCH mapping support applied suggestions from Willy, use XARCH as the input of our nolibc test, use ARCH as the pure kernel input, at last build the mapping between XARCH and ARCH. Customize the variables via the input XARCH. * selftests/nolibc: add test support for powerpc Require to use extconfig to enable the console options specified in configs/powerpc.config currently, we should manually run extconfig after defconfig, in next patchset, we will do this automatically. * selftests/nolibc: add test support for powerpc64le selftests/nolibc: add test support for powerpc64 Very simple, but customize CFLAGS carefully to let them work with powerpc64le-linux-gnu-gcc (from Linux distributions) and powerpc64-linux-gcc (from mirrors.edge.kernel.org) The next patchset will not be tinyconfig, but some prepare patches, will be sent out soon. Best regards, Zhangjin --- Zhangjin Wu (8): tools/nolibc: add support for powerpc tools/nolibc: add support for powerpc64 selftests/nolibc: select_null: fix up for big endian powerpc64 selftests/nolibc: add extra config file customize support selftests/nolibc: add XARCH and ARCH mapping support selftests/nolibc: add test support for powerpc selftests/nolibc: add test support for powerpc64le selftests/nolibc: add test support for powerpc64 tools/include/nolibc/arch-powerpc.h | 170 ++++++++++++++++++ tools/testing/selftests/nolibc/Makefile | 55 ++++-- .../selftests/nolibc/configs/powerpc.config | 3 + tools/testing/selftests/nolibc/nolibc-test.c | 2 +- 4 files changed, 217 insertions(+), 13 deletions(-) create mode 100644 tools/include/nolibc/arch-powerpc.h create mode 100644 tools/testing/selftests/nolibc/configs/powerpc.config -- 2.25.1

1 year, 5 months

4
36
0 0

[PATCH] selftests/nolibc: mmap_munmap_good: fix up return value

by Zhangjin Wu

The other tests use 1 as failure, mmap_munmap_good uses -1 as failure, let's fix up this. Signed-off-by: Zhangjin Wu <falcon(a)tinylab.org> --- Willy, if it is ok for you, please merge this one to our old queued commit: commit 6b3e54d01905 ("selftests/nolibc: add mmap_munmap_good test case") --- tools/testing/selftests/nolibc/nolibc-test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 03b1d30f5507..d892aa403095 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -725,7 +725,7 @@ int test_mmap_munmap(void) page_size = getpagesize(); if (page_size < 0) - return -1; + return 1; /* find a right file to mmap, existed and accessible */ for (i = 0; files[i] != NULL; i++) { @@ -736,7 +736,7 @@ int test_mmap_munmap(void) break; } if (ret == -1) - return ret; + return 1; ret = stat(files[i], &stat_buf); if (ret == -1) @@ -756,7 +756,7 @@ int test_mmap_munmap(void) mem = mmap(NULL, length + offset - pa_offset, PROT_READ, MAP_SHARED, fd, pa_offset); if (mem == MAP_FAILED) { - ret = -1; + ret = 1; goto end; } @@ -764,7 +764,7 @@ int test_mmap_munmap(void) end: close(fd); - return ret; + return !!ret; } -- 2.25.1

1 year, 5 months

3
2
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror July 2023