July 2023 - Linux-kselftest-mirror

[PATCH net 0/3] selftests: tc: increase timeout and add missing kconfig

by Matthieu Baerts

When looking for something else in LKFT reports [1], I noticed that the TC selftest ended with a timeout error: not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds I also noticed most of the tests were skipped because the "teardown stage" did not complete successfully. It was due to missing kconfig. These patches fix these two errors plus an extra one because this selftest reads info from "/proc/net/nf_conntrack". Thank you Pedro for having helped me fixing these issues [2]. Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/te… [1] Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessare… [2] Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net> --- Matthieu Baerts (3): selftests: tc: set timeout to 15 minutes selftests: tc: add 'ct' action kconfig dep selftests: tc: add ConnTrack procfs kconfig tools/testing/selftests/tc-testing/config | 2 ++ tools/testing/selftests/tc-testing/settings | 1 + 2 files changed, 3 insertions(+) --- base-commit: 9d23aac8a85f69239e585c8656c6fdb21be65695 change-id: 20230713-tc-selftests-lkft-363e4590f105 Best regards, -- Matthieu Baerts <matthieu.baerts(a)tessares.net>

1 year, 3 months

5
12
0 0

nolibc: KTAP output and test reports

by Thomas Weißschuh

Hi Willy, Zhangjin, after your recent discussions about the test output and report I wondered if it would make sense to switch nolibc-test to KTAP output format [0]. With this it would be possible to have a wrapper script run each architecture test as its own test subcomponent. A (K)TAP parser/runner could then directly recognize and report failing testcases, making it easier to validate. Also maybe we can hook it up into the regular kselftests setup and have the bots run it as part of that. The kernel even includes a header-only library to implement the format [1]. It also should be fairly easy to emit the format without a library. Thomas [0] Documentation/dev-tools/ktap.rst [1] Documentation/dev-tools/kselftest.rst (Test harness)

1 year, 3 months

3
3
0 0

[PATCH v1 00/22] selftests/nolibc: add minimal kernel config support

by Zhangjin Wu

Willy, Thomas We just sent the 'selftests/nolibc: allow run with minimal kernel config' series [1], Here is the 'minimal' kernel config support, with both of them, it is possible to run nolibc-test for all architectures with oneline command and in less than ~30 minutes - 1 hour (not fullly measured yet): // run with tiny config + qemu-system // Note: rv32 and loongarch require to download the bios at first $ time make run-tiny-all QUIET_RUN=1 // run with default config + qemu-system $ time make run-default-all QUIET_RUN=1 // run with qemu-user $ time make run-user-all QUIET_RUN=1 Besides the 'tinyconfig' suggestion from Thomas, this patch also merge the generic part of my local powerpc porting (the extconfig to add additional console support). This is applied after the test report patchset [2] and the rv32 compile patchset [3], because all of them touched the same Makefile. Even without the 'selftests/nolibc: allow run with minimal kernel config' series [1], all of the tests can pass except the /proc/self/net related ones (We haven't enable CONFIG_NET in this patchset), the chmod_net one will be removed by Thomas from this patchset [4] for the wrong chmodable attribute issue of /proc/self/net, the link_cross one can be simply fixed up by using another /proc/self interface (like /proc/self/cmdline), which will be covered in our revision of the [1] series. Beside the core 'minimal' config support, some generic patch are added together to avoid patch conflicts. * selftests/nolibc: add test for -include /path/to/nolibc.h Add a test switch to allow run nolibc-test with nolibc.h * selftests/nolibc: print result to the screen too Let the run targets print results by default, allow disable by QUIET_RUN=1 * selftests/nolibc: allow use x86_64 toolchain for i386 Allow use x86_64 toolchains for i386 * selftests/nolibc: add menuconfig target for manual config a new 'menuconfig' target added for development and debugging * selftests/nolibc: add tinyconfig target a new 'tinyconfig' compare to 'defconfig', smaller and faster, but not enough for boot and print, require following 'extconfig' target * selftests/nolibc: allow customize extra kernel config options a new 'extconfig' allows to add extra config options for 'defconfig' and 'tinyconfig' * selftests/nolibc: add common extra config options selftests/nolibc: add power reset control support selftests/nolibc: add procfs, shmem and tmpfs Add common extra configs, the 3rd one (procfs, shmem and tmpfs) can be completely reverted after [1] series, but as discuss with Thomas, procfs may be still a hard requirement. * selftests/nolibc: add extra configs for i386 selftests/nolibc: add extra configs for x86_64 selftests/nolibc: add extra configs for arm64 selftests/nolibc: add extra configs for arm selftests/nolibc: add extra configs for mips selftests/nolibc: add extra configs for riscv32 selftests/nolibc: add extra configs for riscv64 selftests/nolibc: add extra configs for s390x selftests/nolibc: add extra configs for loongarch Add architecture specific extra configs to let kernel boot and nolibc-test print. The rv32 added here is only for test, it should not be merged before the missing 64bit syscalls are added (still wait for the merging of the __sysret and -ENOSYS patches). * selftests/nolibc: config default CROSS_COMPILE selftests/nolibc: add run-tiny and run-default both run-tiny and run-default are added to do config and run together, this easier test a log. * selftests/nolibc: allow run tests on all targets selftests/nolibc: detect bios existing to avoid hang Further allow do run-user, run-tiny and run-default for all architectures at once, the -all suffix is added to do so. Since some generic patches are still in review, before sending the left rv32 patches, I'm will send more generic patches later, the coming one is arch-xxx.h cleanup, and then, the 32bit powerpc porting support. For the compile speedup, the next step may be add architecture specific 'O' support, which may allow us rerun across architectures without mrproper, for a single architecture development, this 'minimal' config should be enough ;-) Thanks. Best regards, Zhangjin --- [1]: https://lore.kernel.org/lkml/cover.1687344643.git.falcon@tinylab.org/ [2]: https://lore.kernel.org/lkml/cover.1687156559.git.falcon@tinylab.org/ [3]: https://lore.kernel.org/linux-riscv/cover.1687176996.git.falcon@tinylab.org/ [4]: https://lore.kernel.org/lkml/20230624-proc-net-setattr-v1-0-73176812adee@we… Zhangjin Wu (22): selftests/nolibc: add test for -include /path/to/nolibc.h selftests/nolibc: print result to the screen too selftests/nolibc: allow use x86_64 toolchain for i386 selftests/nolibc: add menuconfig target for manual config selftests/nolibc: add tinyconfig target selftests/nolibc: allow customize extra kernel config options selftests/nolibc: add common extra config options selftests/nolibc: add power reset control support selftests/nolibc: add procfs, shmem and tmpfs selftests/nolibc: add extra configs for i386 selftests/nolibc: add extra configs for x86_64 selftests/nolibc: add extra configs for arm64 selftests/nolibc: add extra configs for arm selftests/nolibc: add extra configs for mips selftests/nolibc: add extra configs for riscv32 selftests/nolibc: add extra configs for riscv64 selftests/nolibc: add extra configs for s390x selftests/nolibc: add extra configs for loongarch selftests/nolibc: config default CROSS_COMPILE selftests/nolibc: add run-tiny and run-default selftests/nolibc: allow run tests on all targets selftests/nolibc: detect bios existing to avoid hang tools/testing/selftests/nolibc/Makefile | 125 ++++++++++++++++++++++-- 1 file changed, 119 insertions(+), 6 deletions(-) -- 2.25.1

1 year, 3 months

3
30
0 0

[GIT PULL] Kselftest fixes update for Linux 6.5-rc3

by Shuah Khan

Hi Linus, Please pull the following Kselftest fixes update for Linux 6.5-rc3. This Kselftest fixes update for Linux 6.5-rc3 consists of fixes to bugs that are interfering with arm64 and riscv workflows. This update also includes two fixes to timer and mincore tests that are causing test failures. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5: Linux 6.5-rc1 (2023-07-09 13:53:13 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-fixes-6.5-rc3 for you to fetch changes up to 569f8b501b177f21121d483a96491716ab8905f4: selftests/arm64: fix build failure during the "emit_tests" step (2023-07-14 12:33:35 -0600) ---------------------------------------------------------------- linux-kselftest-fixes-6.5-rc3 This Kselftest fixes update for Linux 6.5-rc3 consists of fixes to bugs that are interfering with arm64 and riscv workflows. This update also includes two fixes to timer and mincore tests that are causing test failures. ---------------------------------------------------------------- John Hubbard (2): selftests/riscv: fix potential build failure during the "emit_tests" step selftests/arm64: fix build failure during the "emit_tests" step Minjie Du (1): tools: timers: fix freq average calculation Ricardo Cañuelo (1): selftests/mincore: fix skip condition for check_huge_pages test tools/testing/selftests/arm64/Makefile | 2 +- tools/testing/selftests/mincore/mincore_selftest.c | 4 ++-- tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/timers/raw_skew.c | 3 +-- 4 files changed, 5 insertions(+), 6 deletions(-) ----------------------------------------------------------------

1 year, 3 months

2
1
0 0

[PATCH v25 0/5] Implement IOCTL to get and optionally clear info about PTEs

by Muhammad Usama Anjum

*Changes in v25*: - Do proper filtering on hole as well (hole got missed earlier) *Changes in v24*: - Rebase on top of next-20230710 - Place WP markers in case of hole as well *Changes in v23*: - Set vec_buf_index in loop only when vec_buf_index is set - Return -EFAULT instead of -EINVAL if vec is NULL - Correctly return the walk ending address to the page granularity *Changes in v22*: - Interface change: - Replace [start start + len) with [start, end) - Return the ending address of the address walk in start *Changes in v21*: - Abort walk instead of returning error if WP is to be performed on partial hugetlb *Changes in v20* - Correct PAGE_IS_FILE and add PAGE_IS_PFNZERO *Changes in v19* - Minor changes and interface updates *Changes in v18* - Rebase on top of next-20230613 - Minor updates *Changes in v17* - Rebase on top of next-20230606 - Minor improvements in PAGEMAP_SCAN IOCTL patch *Changes in v16* - Fix a corner case - Add exclusive PM_SCAN_OP_WP back *Changes in v15* - Build fix (Add missed build fix in RESEND) *Changes in v14* - Fix build error caused by #ifdef added at last minute in some configs *Changes in v13* - Rebase on top of next-20230414 - Give-up on using uffd_wp_range() and write new helpers, flush tlb only once *Changes in v12* - Update and other memory types to UFFD_FEATURE_WP_ASYNC - Rebaase on top of next-20230406 - Review updates *Changes in v11* - Rebase on top of next-20230307 - Base patches on UFFD_FEATURE_WP_UNPOPULATED - Do a lot of cosmetic changes and review updates - Remove ENGAGE_WP + !GET operation as it can be performed with UFFDIO_WRITEPROTECT *Changes in v10* - Add specific condition to return error if hugetlb is used with wp async - Move changes in tools/include/uapi/linux/fs.h to separate patch - Add documentation *Changes in v9:* - Correct fault resolution for userfaultfd wp async - Fix build warnings and errors which were happening on some configs - Simplify pagemap ioctl's code *Changes in v8:* - Update uffd async wp implementation - Improve PAGEMAP_IOCTL implementation *Changes in v7:* - Add uffd wp async - Update the IOCTL to use uffd under the hood instead of soft-dirty flags *Motivation* The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows GetWriteWatch() syscall [1]. The GetWriteWatch{} retrieves the addresses of the pages that are written to in a region of virtual memory. This syscall is used in Windows applications and games etc. This syscall is being emulated in pretty slow manner in userspace. Our purpose is to enhance the kernel such that we translate it efficiently in a better way. Currently some out of tree hack patches are being used to efficiently emulate it in some kernels. We intend to replace those with these patches. So the whole gaming on Linux can effectively get benefit from this. It means there would be tons of users of this code. CRIU use case [2] was mentioned by Andrei and Danylo: > Use cases for migrating sparse VMAs are binaries sanitized with ASAN, > MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of > shadow memory [4]. Being able to migrate such binaries allows to highly > reduce the amount of work needed to identify and fix post-migration > crashes, which happen constantly. Andrei's defines the following uses of this code: * it is more granular and allows us to track changed pages more effectively. The current interface can clear dirty bits for the entire process only. In addition, reading info about pages is a separate operation. It means we must freeze the process to read information about all its pages, reset dirty bits, only then we can start dumping pages. The information about pages becomes more and more outdated, while we are processing pages. The new interface solves both these downsides. First, it allows us to read pte bits and clear the soft-dirty bit atomically. It means that CRIU will not need to freeze processes to pre-dump their memory. Second, it clears soft-dirty bits for a specified region of memory. It means CRIU will have actual info about pages to the moment of dumping them. * The new interface has to be much faster because basic page filtering is happening in the kernel. With the old interface, we have to read pagemap for each page. *Implementation Evolution (Short Summary)* From the definition of GetWriteWatch(), we feel like kernel's soft-dirty feature can be used under the hood with some additions like: * reset soft-dirty flag for only a specific region of memory instead of clearing the flag for the entire process * get and clear soft-dirty flag for a specific region atomically So we decided to use ioctl on pagemap file to read or/and reset soft-dirty flag. But using soft-dirty flag, sometimes we get extra pages which weren't even written. They had become soft-dirty because of VMA merging and VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were able to by-pass this short coming by ignoring VM_SOFTDIRTY until David reported that mprotect etc messes up the soft-dirty flag while ignoring VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We discussed if we can revert these patches. But we could not reach to any conclusion. So at this point, I made couple of tries to solve this whole VM_SOFTDIRTY issue by correcting the soft-dirty implementation: * [7] Correct the bug fixed wrongly back in 2014. It had potential to cause regression. We left it behind. * [8] Keep a list of soft-dirty part of a VMA across splits and merges. I got the reply don't increase the size of the VMA by 8 bytes. At this point, we left soft-dirty considering it is too much delicate and userfaultfd [9] seemed like the only way forward. From there onward, we have been basing soft-dirty emulation on userfaultfd wp feature where kernel resolves the faults itself when WP_ASYNC feature is used. It was straight forward to add WP_ASYNC feature in userfautlfd. Now we get only those pages dirty or written-to which are really written in reality. (PS There is another WP_UNPOPULATED userfautfd feature is required which is needed to avoid pre-faulting memory before write-protecting [9].) All the different masks were added on the request of CRIU devs to create interface more generic and better. [1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-… [2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com [3] https://github.com/google/sanitizers [4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit [5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com [6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/ [7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.… [8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.… [9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com [10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com * Original Cover letter from v8* Hello, Note: Soft-dirty pages and pages which have been written-to are synonyms. As kernel already has soft-dirty feature inside which we have given up to use, we are using written-to terminology while using UFFD async WP under the hood. This IOCTL, PAGEMAP_SCAN on pagemap file can be used to get and/or clear the info about page table entries. The following operations are supported in this ioctl: - Get the information if the pages have been written-to (PAGE_IS_WRITTEN), file mapped (PAGE_IS_FILE), present (PAGE_IS_PRESENT) or swapped (PAGE_IS_SWAPPED). - Write-protect the pages (PAGEMAP_WP_ENGAGE) to start finding which pages have been written-to. - Find pages which have been written-to and write protect the pages (atomic PAGE_IS_WRITTEN + PAGEMAP_WP_ENGAGE) It is possible to find and clear soft-dirty pages entirely in userspace. But it isn't efficient: - The mprotect and SIGSEGV handler for bookkeeping - The userfaultfd wp (synchronous) with the handler for bookkeeping Some benchmarks can be seen here[1]. This series adds features that weren't present earlier: - There is no atomic get soft-dirty/Written-to status and clear present in the kernel. - The pages which have been written-to can not be found in accurate way. (Kernel's soft-dirty PTE bit + sof_dirty VMA bit shows more soft-dirty pages than there actually are.) Historically, soft-dirty PTE bit tracking has been used in the CRIU project. The procfs interface is enough for finding the soft-dirty bit status and clearing the soft-dirty bit of all the pages of a process. We have the use case where we need to track the soft-dirty PTE bit for only specific pages on-demand. We need this tracking and clear mechanism of a region of memory while the process is running to emulate the getWriteWatch() syscall of Windows. *(Moved to using UFFD instead of soft-dirtyi feature to find pages which have been written-to from v7 patch series)*: Stop using the soft-dirty flags for finding which pages have been written to. It is too delicate and wrong as it shows more soft-dirty pages than the actual soft-dirty pages. There is no interest in correcting it [2][3] as this is how the feature was written years ago. It shouldn't be updated to changed behaviour. Peter Xu has suggested using the async version of the UFFD WP [4] as it is based inherently on the PTEs. So in this patch series, I've added a new mode to the UFFD which is asynchronous version of the write protect. When this variant of the UFFD WP is used, the page faults are resolved automatically by the kernel. The pages which have been written-to can be found by reading pagemap file (!PM_UFFD_WP). This feature can be used successfully to find which pages have been written to from the time the pages were write protected. This works just like the soft-dirty flag without showing any extra pages which aren't soft-dirty in reality. The information related to pages if the page is file mapped, present and swapped is required for the CRIU project [5][6]. The addition of the required mask, any mask, excluded mask and return masks are also required for the CRIU project [5]. The IOCTL returns the addresses of the pages which match the specific masks. The page addresses are returned in struct page_region in a compact form. The max_pages is needed to support a use case where user only wants to get a specific number of pages. So there is no need to find all the pages of interest in the range when max_pages is specified. The IOCTL returns when the maximum number of the pages are found. The max_pages is optional. If max_pages is specified, it must be equal or greater than the vec_size. This restriction is needed to handle worse case when one page_region only contains info of one page and it cannot be compacted. This is needed to emulate the Windows getWriteWatch() syscall. The patch series include the detailed selftest which can be used as an example for the uffd async wp test and PAGEMAP_IOCTL. It shows the interface usages as well. [1] https://lore.kernel.org/lkml/54d4c322-cd6e-eefd-b161-2af2b56aae24@collabora… [2] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.… [3] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.… [4] https://lore.kernel.org/all/Y6Hc2d+7eTKs7AiH@x1n [5] https://lore.kernel.org/all/YyiDg79flhWoMDZB@gmail.com/ [6] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com/ Regards, Muhammad Usama Anjum Muhammad Usama Anjum (4): fs/proc/task_mmu: Implement IOCTL to get and optionally clear info about PTEs tools headers UAPI: Update linux/fs.h with the kernel sources mm/pagemap: add documentation of PAGEMAP_SCAN IOCTL selftests: mm: add pagemap ioctl tests Peter Xu (1): userfaultfd: UFFD_FEATURE_WP_ASYNC Documentation/admin-guide/mm/pagemap.rst | 58 + Documentation/admin-guide/mm/userfaultfd.rst | 35 + fs/proc/task_mmu.c | 591 +++++++ fs/userfaultfd.c | 26 +- include/linux/hugetlb.h | 1 + include/linux/userfaultfd_k.h | 21 +- include/uapi/linux/fs.h | 55 + include/uapi/linux/userfaultfd.h | 9 +- mm/hugetlb.c | 34 +- mm/memory.c | 27 +- tools/include/uapi/linux/fs.h | 55 + tools/testing/selftests/mm/.gitignore | 2 + tools/testing/selftests/mm/Makefile | 3 +- tools/testing/selftests/mm/config | 1 + tools/testing/selftests/mm/pagemap_ioctl.c | 1464 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 4 + 16 files changed, 2362 insertions(+), 24 deletions(-) create mode 100644 tools/testing/selftests/mm/pagemap_ioctl.c mode change 100644 => 100755 tools/testing/selftests/mm/run_vmtests.sh -- 2.39.2

1 year, 3 months

3
10
0 0

[PATCH] selftests: Fix arm64 test installation

by Mark Brown

The recent change fc96c7c19df ("selftests: error out if kernel header files are not yet built") to generate an error message when building kselftests without having installed the headers is generating spurious failures during the install step which breaks the arm64 selftests (and only the arm64 selftests): Emit Tests for arm64 make[5]: *** [../../lib.mk:81: kernel_header_files] Error 1 make[5]: *** [../../lib.mk:81: kernel_header_files] Error 1 make[5]: *** [../../lib.mk:81: kernel_header_files] Error 1 make[5]: *** [../../lib.mk:81: kernel_header_files] Error 1 make[5]: *** [../../lib.mk:81: kernel_header_files] Error 1 make[5]: *** [../../lib.mk:81: kernel_header_files] Error 1 make[5]: *** [../../lib.mk:81: kernel_header_files] Error 1 make[4]: *** [Makefile:26: all] Error 2 Presumably the arm64 tests are doing something unusual in their build setup which could be adjusted but I didn't immediately see it and since this is having a serious impact on test coverage in automation let's just revert for now. This is causing failures in KernelCI with the command: make KBUILD_BUILD_USER=KernelCI FORMAT=.xz ARCH=arm64 HOSTCC=gcc CROSS_COMPILE=aarch64-linux-gnu- CROSS_COMPILE_COMPAT=arm-linux-gnueabihf- CC="ccache aarch64-linux-gnu-gcc" O=/tmp/kci/linux/build -C/tmp/kci/linux -j10 kselftest-gen_tar and also when building using tuxmake. Full log: https://storage.kernelci.org/mainline/master/v6.5-rc1/arm64/defconfig/gcc-1… Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built") Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/Makefile | 21 +-------------------- tools/testing/selftests/lib.mk | 40 +++------------------------------------- 2 files changed, 4 insertions(+), 57 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 666b56f22a41..405683b8cb39 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -146,12 +146,10 @@ ifneq ($(KBUILD_OUTPUT),) abs_objtree := $(realpath $(abs_objtree)) BUILD := $(abs_objtree)/kselftest KHDR_INCLUDES := -isystem ${abs_objtree}/usr/include - KHDR_DIR := ${abs_objtree}/usr/include else BUILD := $(CURDIR) abs_srctree := $(shell cd $(top_srcdir) && pwd) KHDR_INCLUDES := -isystem ${abs_srctree}/usr/include - KHDR_DIR := ${abs_srctree}/usr/include DEFAULT_INSTALL_HDR_PATH := 1 endif @@ -165,7 +163,7 @@ export KHDR_INCLUDES # all isn't the first target in the file. .DEFAULT_GOAL := all -all: kernel_header_files +all: @ret=1; \ for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ @@ -176,23 +174,6 @@ all: kernel_header_files ret=$$((ret * $$?)); \ done; exit $$ret; -kernel_header_files: - @ls $(KHDR_DIR)/linux/*.h >/dev/null 2>/dev/null; \ - if [ $$? -ne 0 ]; then \ - RED='\033[1;31m'; \ - NOCOLOR='\033[0m'; \ - echo; \ - echo -e "$${RED}error$${NOCOLOR}: missing kernel header files."; \ - echo "Please run this and try again:"; \ - echo; \ - echo " cd $(top_srcdir)"; \ - echo " make headers"; \ - echo; \ - exit 1; \ - fi - -.PHONY: kernel_header_files - run_tests: all @for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index d17854285f2b..05400462c779 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -44,26 +44,10 @@ endif selfdir = $(realpath $(dir $(filter %/lib.mk,$(MAKEFILE_LIST)))) top_srcdir = $(selfdir)/../../.. -ifeq ("$(origin O)", "command line") - KBUILD_OUTPUT := $(O) +ifeq ($(KHDR_INCLUDES),) +KHDR_INCLUDES := -isystem $(top_srcdir)/usr/include endif -ifneq ($(KBUILD_OUTPUT),) - # Make's built-in functions such as $(abspath ...), $(realpath ...) cannot - # expand a shell special character '~'. We use a somewhat tedious way here. - abs_objtree := $(shell cd $(top_srcdir) && mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) && pwd) - $(if $(abs_objtree),, \ - $(error failed to create output directory "$(KBUILD_OUTPUT)")) - # $(realpath ...) resolves symlinks - abs_objtree := $(realpath $(abs_objtree)) - KHDR_DIR := ${abs_objtree}/usr/include -else - abs_srctree := $(shell cd $(top_srcdir) && pwd) - KHDR_DIR := ${abs_srctree}/usr/include -endif - -KHDR_INCLUDES := -isystem $(KHDR_DIR) - # The following are built by lib.mk common compile rules. # TEST_CUSTOM_PROGS should be used by tests that require # custom build rule and prevent common build rule use. @@ -74,25 +58,7 @@ TEST_GEN_PROGS := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS)) TEST_GEN_PROGS_EXTENDED := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS_EXTENDED)) TEST_GEN_FILES := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_FILES)) -all: kernel_header_files $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) \ - $(TEST_GEN_FILES) - -kernel_header_files: - @ls $(KHDR_DIR)/linux/*.h >/dev/null 2>/dev/null; \ - if [ $$? -ne 0 ]; then \ - RED='\033[1;31m'; \ - NOCOLOR='\033[0m'; \ - echo; \ - echo -e "$${RED}error$${NOCOLOR}: missing kernel header files."; \ - echo "Please run this and try again:"; \ - echo; \ - echo " cd $(top_srcdir)"; \ - echo " make headers"; \ - echo; \ - exit 1; \ - fi - -.PHONY: kernel_header_files +all: $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) define RUN_TESTS BASE_DIR="$(selfdir)"; \ --- base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5 change-id: 20230710-kselftest-fix-arm64-c023160018d7 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 year, 3 months

4
19
0 0

[PATCH] selftests: vDSO: fix Makefile so that it uses lib.mk correctly

by Aditya Deshpande

kselftest.rst states that flags must be specified before including lib.mk, but the vDSO selftest Makefile does not follow this order. As a result, changes made by lib.mk to flags and other variables are overwritten by the Makefile. For example, it is impossible to pass CFLAGS to the compiler via make. Rectify this by including lib.mk after assigning flag values. Also change the paths of the generated programs from absolute to relative paths as lib.mk will now correctly prepend the output directory path to the program name as intended. Cc: Shuah Khan <shuah(a)kernel.org> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino(a)arm.com> Signed-off-by: Aditya Deshpande <aditya.deshpande(a)arm.com> --- tools/testing/selftests/vDSO/Makefile | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/vDSO/Makefile b/tools/testing/selftests/vDSO/Makefile index d53a4d8008f9..19145210d044 100644 --- a/tools/testing/selftests/vDSO/Makefile +++ b/tools/testing/selftests/vDSO/Makefile @@ -1,16 +1,15 @@ # SPDX-License-Identifier: GPL-2.0 -include ../lib.mk - uname_M := $(shell uname -m 2>/dev/null || echo not) ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/) -TEST_GEN_PROGS := $(OUTPUT)/vdso_test_gettimeofday $(OUTPUT)/vdso_test_getcpu -TEST_GEN_PROGS += $(OUTPUT)/vdso_test_abi -TEST_GEN_PROGS += $(OUTPUT)/vdso_test_clock_getres +TEST_GEN_PROGS := vdso_test_gettimeofday +TEST_GEN_PROGS += vdso_test_getcpu +TEST_GEN_PROGS += vdso_test_abi +TEST_GEN_PROGS += vdso_test_clock_getres ifeq ($(ARCH),$(filter $(ARCH),x86 x86_64)) -TEST_GEN_PROGS += $(OUTPUT)/vdso_standalone_test_x86 +TEST_GEN_PROGS += vdso_standalone_test_x86 endif -TEST_GEN_PROGS += $(OUTPUT)/vdso_test_correctness +TEST_GEN_PROGS += vdso_test_correctness CFLAGS := -std=gnu99 CFLAGS_vdso_standalone_test_x86 := -nostdlib -fno-asynchronous-unwind-tables -fno-stack-protector @@ -19,7 +18,8 @@ ifeq ($(CONFIG_X86_32),y) LDLIBS += -lgcc_s endif -all: $(TEST_GEN_PROGS) +include ../lib.mk + $(OUTPUT)/vdso_test_gettimeofday: parse_vdso.c vdso_test_gettimeofday.c $(OUTPUT)/vdso_test_getcpu: parse_vdso.c vdso_test_getcpu.c $(OUTPUT)/vdso_test_abi: parse_vdso.c vdso_test_abi.c -- 2.25.1

1 year, 3 months

2
1
0 0

[PATCH v4] selftests: rtc: Improves rtctest error handling.

by Atul Kumar Pant

When running the rtctest if we pass wrong rtc device file as an argument the test fails expectedly, but prints the logs that are not useful to point out the issue. To handle this, the patch adds a checks to verify if the rtc_file is valid. Signed-off-by: Atul Kumar Pant <atulpant.linux(a)gmail.com> --- changes since v3: Added Linux-kselftest and Linux-kernel mailing lists. changes since v2: Changed error message when rtc file does not exist. changes since v1: Removed check for uid=0 If rtc file is invalid, then exit the test. tools/testing/selftests/rtc/rtctest.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c index 63ce02d1d5cc..630fef735c7e 100644 --- a/tools/testing/selftests/rtc/rtctest.c +++ b/tools/testing/selftests/rtc/rtctest.c @@ -17,6 +17,7 @@ #include <unistd.h> #include "../kselftest_harness.h" +#include "../kselftest.h" #define NUM_UIE 3 #define ALARM_DELTA 3 @@ -419,6 +420,8 @@ __constructor_order_last(void) int main(int argc, char **argv) { + int ret = -1; + switch (argc) { case 2: rtc_file = argv[1]; @@ -430,5 +433,11 @@ int main(int argc, char **argv) return 1; } - return test_harness_run(argc, argv); + // Run the test if rtc_file is valid + if (access(rtc_file, F_OK) == 0) + ret = test_harness_run(argc, argv); + else + ksft_exit_fail_msg("[ERROR]: Cannot access rtc file %s - Exiting\n", rtc_file); + + return ret; } -- 2.25.1

1 year, 3 months

2
1
0 0

[PATCH v3 0/4] kernel.h: Split out a couple of macros to args.h

by Andy Shevchenko

There are macros in kernel.h that can be used outside of that header. Split them to args.h and replace open coded variants. Test compiled with `make allmodconfig` for x86_64. (Note that positive diff statistics is due to documentation being updated.) In v3: - split to a series of patches - fixed build issue on `make allmodconfig` for x86_64 (Andrew) In v2: - converted existing users at the same time (Andrew, Rasmus) - documented how it does work (Andrew, Rasmus) Andy Shevchenko (4): kernel.h: Split out COUNT_ARGS() and CONCATENATE() to args.h x86/asm: Replace custom COUNT_ARGS() & CONCATENATE() implementations arm64: smccc: Replace custom COUNT_ARGS() & CONCATENATE() implementations genetlink: Replace custom CONCATENATE() implementation arch/x86/include/asm/rmwcc.h | 11 +++-------- include/kunit/test.h | 1 + include/linux/args.h | 28 ++++++++++++++++++++++++++++ include/linux/arm-smccc.h | 27 ++++++++++----------------- include/linux/genl_magic_func.h | 27 ++++++++++++++------------- include/linux/genl_magic_struct.h | 8 +++----- include/linux/kernel.h | 7 ------- include/linux/pci.h | 2 +- include/trace/bpf_probe.h | 2 ++ 9 files changed, 62 insertions(+), 51 deletions(-) create mode 100644 include/linux/args.h -- 2.40.0.1.gaa8946217a0b

1 year, 3 months

1
4
0 0

[PATCH v2 1/1] kernel.h: Split out COUNT_ARGS() and CONCATENATE() to args.h

by Andy Shevchenko

kernel.h is being used as a dump for all kinds of stuff for a long time. The COUNT_ARGS() and CONCATENATE() macros may be used in some places without need of the full kernel.h dependency train with it. Here is the attempt on cleaning it up by splitting out these macros(). While at it, include new header where it's being used and drop custom implementation of these macros and document how it works. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- v2: converted existing users at the same time, documented (Andrew, Rasmus) arch/x86/include/asm/rmwcc.h | 11 +++-------- include/kunit/test.h | 1 + include/linux/args.h | 28 ++++++++++++++++++++++++++++ include/linux/arm-smccc.h | 27 ++++++++++----------------- include/linux/genl_magic_struct.h | 8 +++----- include/linux/kernel.h | 7 ------- include/linux/pci.h | 2 +- include/trace/bpf_probe.h | 2 ++ 8 files changed, 48 insertions(+), 38 deletions(-) create mode 100644 include/linux/args.h diff --git a/arch/x86/include/asm/rmwcc.h b/arch/x86/include/asm/rmwcc.h index 7fa611216417..4b081e0d3306 100644 --- a/arch/x86/include/asm/rmwcc.h +++ b/arch/x86/include/asm/rmwcc.h @@ -2,12 +2,7 @@ #ifndef _ASM_X86_RMWcc #define _ASM_X86_RMWcc -/* This counts to 12. Any more, it will return 13th argument. */ -#define __RMWcc_ARGS(_0, _1, _2, _3, _4, _5, _6, _7, _8, _9, _10, _11, _12, _n, X...) _n -#define RMWcc_ARGS(X...) __RMWcc_ARGS(, ##X, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0) - -#define __RMWcc_CONCAT(a, b) a ## b -#define RMWcc_CONCAT(a, b) __RMWcc_CONCAT(a, b) +#include <linux/args.h> #define __CLOBBERS_MEM(clb...) "memory", ## clb @@ -48,7 +43,7 @@ cc_label: c = true; \ #define GEN_UNARY_RMWcc_3(op, var, cc) \ GEN_UNARY_RMWcc_4(op, var, cc, "%[var]") -#define GEN_UNARY_RMWcc(X...) RMWcc_CONCAT(GEN_UNARY_RMWcc_, RMWcc_ARGS(X))(X) +#define GEN_UNARY_RMWcc(X...) CONCATENATE(GEN_UNARY_RMWcc_, COUNT_ARGS(X))(X) #define GEN_BINARY_RMWcc_6(op, var, cc, vcon, _val, arg0) \ __GEN_RMWcc(op " %[val], " arg0, var, cc, \ @@ -57,7 +52,7 @@ cc_label: c = true; \ #define GEN_BINARY_RMWcc_5(op, var, cc, vcon, val) \ GEN_BINARY_RMWcc_6(op, var, cc, vcon, val, "%[var]") -#define GEN_BINARY_RMWcc(X...) RMWcc_CONCAT(GEN_BINARY_RMWcc_, RMWcc_ARGS(X))(X) +#define GEN_BINARY_RMWcc(X...) CONCATENATE(GEN_BINARY_RMWcc_, COUNT_ARGS(X))(X) #define GEN_UNARY_SUFFIXED_RMWcc(op, suffix, var, cc, clobbers...) \ __GEN_RMWcc(op " %[var]\n\t" suffix, var, cc, \ diff --git a/include/kunit/test.h b/include/kunit/test.h index 23120d50499e..107c81431634 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -12,6 +12,7 @@ #include <kunit/assert.h> #include <kunit/try-catch.h> +#include <linux/args.h> #include <linux/compiler.h> #include <linux/container_of.h> #include <linux/err.h> diff --git a/include/linux/args.h b/include/linux/args.h new file mode 100644 index 000000000000..8ff60a54eb7d --- /dev/null +++ b/include/linux/args.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _LINUX_ARGS_H +#define _LINUX_ARGS_H + +/* + * How do these macros work? + * + * In __COUNT_ARGS() _0 to _12 are just placeholders from the start + * in order to make sure _n is positioned over the correct number + * from 12 to 0 (depending on X, which is a variadic argument list). + * They serve no purpose other than occupying a position. Since each + * macro parameter must have a distinct identifier, those identifiers + * are as good as any. + * + * In COUNT_ARGS() we use actual integers, so __COUNT_ARGS() returns + * that as _n. + */ + +/* This counts to 12. Any more, it will return 13th argument. */ +#define __COUNT_ARGS(_0, _1, _2, _3, _4, _5, _6, _7, _8, _9, _10, _11, _12, _n, X...) _n +#define COUNT_ARGS(X...) __COUNT_ARGS(, ##X, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0) + +/* Concatenate two parameters, but allow them to be expanded beforehand. */ +#define __CONCAT(a, b) a ## b +#define CONCATENATE(a, b) __CONCAT(a, b) + +#endif /* _LINUX_ARGS_H */ diff --git a/include/linux/arm-smccc.h b/include/linux/arm-smccc.h index f196c19f8e55..2865b14c2bba 100644 --- a/include/linux/arm-smccc.h +++ b/include/linux/arm-smccc.h @@ -5,6 +5,7 @@ #ifndef __LINUX_ARM_SMCCC_H #define __LINUX_ARM_SMCCC_H +#include <linux/args.h> #include <linux/init.h> #include <uapi/linux/const.h> @@ -413,11 +414,6 @@ asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1, #endif -#define ___count_args(_0, _1, _2, _3, _4, _5, _6, _7, _8, x, ...) x - -#define __count_args(...) \ - ___count_args(__VA_ARGS__, 7, 6, 5, 4, 3, 2, 1, 0) - #define __constraint_read_0 "r" (arg0) #define __constraint_read_1 __constraint_read_0, "r" (arg1) #define __constraint_read_2 __constraint_read_1, "r" (arg2) @@ -475,14 +471,6 @@ asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1, __declare_arg_6(a0, a1, a2, a3, a4, a5, a6, res); \ register typeof(a7) arg7 asm("r7") = __a7 -#define ___declare_args(count, ...) __declare_arg_ ## count(__VA_ARGS__) -#define __declare_args(count, ...) ___declare_args(count, __VA_ARGS__) - -#define ___constraints(count) \ - : __constraint_read_ ## count \ - : smccc_sve_clobbers "memory" -#define __constraints(count) ___constraints(count) - /* * We have an output list that is not necessarily used, and GCC feels * entitled to optimise the whole sequence away. "volatile" is what @@ -494,11 +482,13 @@ asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1, register unsigned long r1 asm("r1"); \ register unsigned long r2 asm("r2"); \ register unsigned long r3 asm("r3"); \ - __declare_args(__count_args(__VA_ARGS__), __VA_ARGS__); \ + CONCATENATE(__declare_arg_, COUNT_ARGS(__VA_ARGS__)); \ asm volatile(SMCCC_SVE_CHECK \ inst "\n" : \ "=r" (r0), "=r" (r1), "=r" (r2), "=r" (r3) \ - __constraints(__count_args(__VA_ARGS__))); \ + : CONCATENATE(__constraint_read_, \ + COUNT_ARGS(__VA_ARGS__)) \ + : smccc_sve_clobbers "memory"); \ if (___res) \ *___res = (typeof(*___res)){r0, r1, r2, r3}; \ } while (0) @@ -542,8 +532,11 @@ asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1, */ #define __fail_smccc_1_1(...) \ do { \ - __declare_args(__count_args(__VA_ARGS__), __VA_ARGS__); \ - asm ("" : __constraints(__count_args(__VA_ARGS__))); \ + CONCATENATE(__declare_arg_, COUNT_ARGS(__VA_ARGS__)); \ + asm ("" : \ + : CONCATENATE(__constraint_read_, \ + COUNT_ARGS(__VA_ARGS__)) \ + : smccc_sve_clobbers "memory"); \ if (___res) \ ___res->a0 = SMCCC_RET_NOT_SUPPORTED; \ } while (0) diff --git a/include/linux/genl_magic_struct.h b/include/linux/genl_magic_struct.h index f81d48987528..a419d93789ff 100644 --- a/include/linux/genl_magic_struct.h +++ b/include/linux/genl_magic_struct.h @@ -14,14 +14,12 @@ # error "you need to define GENL_MAGIC_INCLUDE_FILE before inclusion" #endif +#include <linux/args.h> #include <linux/genetlink.h> #include <linux/types.h> -#define CONCAT__(a,b) a ## b -#define CONCAT_(a,b) CONCAT__(a,b) - -extern int CONCAT_(GENL_MAGIC_FAMILY, _genl_register)(void); -extern void CONCAT_(GENL_MAGIC_FAMILY, _genl_unregister)(void); +extern int CONCATENATE(GENL_MAGIC_FAMILY, _genl_register)(void); +extern void CONCATENATE(GENL_MAGIC_FAMILY, _genl_unregister)(void); /* * Extension of genl attribute validation policies {{{2 diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 0b00e1aef33d..15d9496db169 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -419,13 +419,6 @@ ftrace_vprintk(const char *fmt, va_list ap) static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } #endif /* CONFIG_TRACING */ -/* This counts to 12. Any more, it will return 13th argument. */ -#define __COUNT_ARGS(_0, _1, _2, _3, _4, _5, _6, _7, _8, _9, _10, _11, _12, _n, X...) _n -#define COUNT_ARGS(X...) __COUNT_ARGS(, ##X, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0) - -#define __CONCAT(a, b) a ## b -#define CONCATENATE(a, b) __CONCAT(a, b) - /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */ #ifdef CONFIG_FTRACE_MCOUNT_RECORD # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD diff --git a/include/linux/pci.h b/include/linux/pci.h index 0ff7500772e6..eeb2e6f6130f 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -23,7 +23,7 @@ #ifndef LINUX_PCI_H #define LINUX_PCI_H - +#include <linux/args.h> #include <linux/mod_devicetable.h> #include <linux/types.h> diff --git a/include/trace/bpf_probe.h b/include/trace/bpf_probe.h index 1f7fc1fc590c..e609cd7da47e 100644 --- a/include/trace/bpf_probe.h +++ b/include/trace/bpf_probe.h @@ -12,6 +12,8 @@ #undef __perf_task #define __perf_task(t) (t) +#include <linux/args.h> + /* cast any integer, pointer, or small struct to u64 */ #define UINTTYPE(size) \ __typeof__(__builtin_choose_expr(size == 1, (u8)1, \ -- 2.40.0.1.gaa8946217a0b

1 year, 3 months

3
3
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror July 2023