May 2023 - Linux-kselftest-mirror

[PATCH v2] selftests/input: Introduce basic tests for evdev ioctls

by Enric Balletbo i Serra

This provides a basic infrastructure for the creation of tests for the evdev interface. Most of this code is adapted from the libevdev wrapper library. While most of evdev ioctls are covered and tested using libevdev tests there are some evdev ioctls that aren't because are not supported (and will not be supported) by libevdev [1]. So, adding, at least those tests, would make sense. The test creates an uinput device (and an evdev device) so you can call the wanted ioctl from userspace. So, to run those tests you need to have support for uinput and evdev as well. [1] For example, libevdev doesn't support setting EV_REP because it's inherently racy - one libevdev context to set those values via the ioctl would cause all other libevdev contexts on the same device to be out of sync. Since we do not get notifications when the values changed, libevdev's buffered values for EV_REP will remain whatever they were initially. Signed-off-by: Enric Balletbo i Serra <eballetbo(a)kernel.org> --- Test output: TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN global.eviocgname_get_device_name ... # OK global.eviocgname_get_device_name ok 1 global.eviocgname_get_device_name # RUN global.eviocgrep_get_repeat_settings ... # OK global.eviocgrep_get_repeat_settings ok 2 global.eviocgrep_get_repeat_settings # RUN global.eviocsrep_set_repeat_settings ... # OK global.eviocsrep_set_repeat_settings ok 3 global.eviocsrep_set_repeat_settings # PASSED: 3 / 3 tests passed. # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 tools/testing/selftests/Makefile | 1 + tools/testing/selftests/input/.gitignore | 2 + tools/testing/selftests/input/Makefile | 5 + tools/testing/selftests/input/config | 3 + tools/testing/selftests/input/evioc-test.c | 259 +++++++++++++++++++++ 5 files changed, 270 insertions(+) create mode 100644 tools/testing/selftests/input/.gitignore create mode 100644 tools/testing/selftests/input/Makefile create mode 100644 tools/testing/selftests/input/config create mode 100644 tools/testing/selftests/input/evioc-test.c diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 90a62cf75008..29fc77168aa7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -28,6 +28,7 @@ TARGETS += futex TARGETS += gpio TARGETS += hid TARGETS += intel_pstate +TARGETS += input TARGETS += iommu TARGETS += ipc TARGETS += ir diff --git a/tools/testing/selftests/input/.gitignore b/tools/testing/selftests/input/.gitignore new file mode 100644 index 000000000000..37f5dff3255b --- /dev/null +++ b/tools/testing/selftests/input/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +evioc-test diff --git a/tools/testing/selftests/input/Makefile b/tools/testing/selftests/input/Makefile new file mode 100644 index 000000000000..031729be0628 --- /dev/null +++ b/tools/testing/selftests/input/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +CFLAGS += -D_GNU_SOURCE -std=gnu99 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES) + +TEST_GEN_PROGS := evioc-test +include ../lib.mk diff --git a/tools/testing/selftests/input/config b/tools/testing/selftests/input/config new file mode 100644 index 000000000000..b7512f3e6d8d --- /dev/null +++ b/tools/testing/selftests/input/config @@ -0,0 +1,3 @@ +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_UINPUT=m diff --git a/tools/testing/selftests/input/evioc-test.c b/tools/testing/selftests/input/evioc-test.c new file mode 100644 index 000000000000..1b951d41ee47 --- /dev/null +++ b/tools/testing/selftests/input/evioc-test.c @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2023 Red Hat, Inc. + * + * Part of the code in this file is inspired and copied from the libevdev wrapper library + * for evdev devices written by Peter Hutterer. + */ + +#include <dirent.h> +#include <errno.h> +#include <fcntl.h> +#include <linux/uinput.h> +#include <poll.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/stat.h> +#include <time.h> +#include <unistd.h> + +#include "../kselftest_harness.h" + +#define TEST_DEVICE_NAME "selftest input device" + +struct selftest_uinput { + int uinput_fd; /** file descriptor to uinput */ + int evdev_fd; /** file descriptor to evdev */ + char *name; /** device name */ + char *syspath; /** /sys path */ + char *devnode; /** device node */ +}; + +static int is_event_device(const struct dirent *dent) +{ + return strncmp("event", dent->d_name, 5) == 0; +} + +static char *fetch_device_node(const char *path) +{ + struct dirent **namelist; + char *devnode = NULL; + int ndev, i; + + ndev = scandir(path, &namelist, is_event_device, alphasort); + if (ndev <= 0) + return NULL; + + /* ndev should only ever be 1 */ + + for (i = 0; i < ndev; i++) { + if (!devnode && asprintf(&devnode, "/dev/input/%s", + namelist[i]->d_name) == -1) + devnode = NULL; + free(namelist[i]); + } + + free(namelist); + + return devnode; +} + +static int fetch_syspath_and_devnode(struct selftest_uinput *uidev) +{ +#define SYS_INPUT_DIR "/sys/devices/virtual/input/" + char buf[sizeof(SYS_INPUT_DIR) + 64] = SYS_INPUT_DIR; + int rc; + + rc = ioctl(uidev->uinput_fd, + UI_GET_SYSNAME(sizeof(buf) - strlen(SYS_INPUT_DIR)), + &buf[strlen(SYS_INPUT_DIR)]); + if (rc == -1) { + fprintf(stderr, "cannot get the sysfs name of the uinput device (%d)\n", rc); + return rc; + } + + uidev->syspath = strdup(buf); + uidev->devnode = fetch_device_node(buf); + + return uidev->devnode ? 0 : -1; +#undef SYS_INPUT_DIR +} + +static void selftest_uinput_destroy(struct selftest_uinput *uidev) +{ + if (!uidev) + return; + + if (uidev->uinput_fd >= 0) + ioctl(uidev->uinput_fd, UI_DEV_DESTROY, NULL); + + close(uidev->evdev_fd); + close(uidev->uinput_fd); + + free(uidev->syspath); + free(uidev->devnode); + free(uidev->name); + free(uidev); +} + +static int selftest_uinput_create_device(struct selftest_uinput **uidev, ...) +{ + struct selftest_uinput *new_device; + struct uinput_setup setup; + va_list args; + int rc, fd; + int type; + + new_device = calloc(1, sizeof(struct selftest_uinput)); + if (!new_device) + return -ENOMEM; + + memset(&setup, 0, sizeof(setup)); + strncpy(setup.name, TEST_DEVICE_NAME, UINPUT_MAX_NAME_SIZE - 1); + setup.id.vendor = 0x1234; /* sample vendor */ + setup.id.product = 0x5678; /* sample product */ + setup.id.bustype = BUS_USB; + + fd = open("/dev/uinput", O_WRONLY | O_NONBLOCK); + if (fd < 0) { + fprintf(stderr, "cannot open uinput (%d): %m\n", errno); + goto error; + } + + va_start(args, uidev); + rc = 0; + do { + type = va_arg(args, int); + if (type == -1) + break; + rc = ioctl(fd, UI_SET_EVBIT, type); + } while (rc == 0); + va_end(args); + + rc = ioctl(fd, UI_DEV_SETUP, &setup); + if (rc == -1) + goto error; + + rc = ioctl(fd, UI_DEV_CREATE, NULL); + if (rc == -1) + goto error; + + new_device->name = strdup(TEST_DEVICE_NAME); + new_device->uinput_fd = fd; + + if (fetch_syspath_and_devnode(new_device) == -1) { + fprintf(stderr, "unable to fetch syspath or device node.\n"); + errno = ENODEV; + goto error; + } + + fd = open(new_device->devnode, O_RDONLY); + if (fd < 0) { + fprintf(stderr, "cannot open uinput (%d): %m\n", errno); + goto error; + } + new_device->evdev_fd = fd; + + *uidev = new_device; + + return 0; + +error: + rc = -errno; + selftest_uinput_destroy(new_device); + return rc; +} + +TEST(eviocgname_get_device_name) +{ + struct selftest_uinput *uidev; + char buf[256]; + int rc; + + rc = selftest_uinput_create_device(&uidev); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + memset(buf, 0, sizeof(buf)); + /* ioctl to get the name */ + rc = ioctl(uidev->evdev_fd, EVIOCGNAME(sizeof(buf) - 1), buf); + ASSERT_GE(rc, 0); + ASSERT_STREQ(TEST_DEVICE_NAME, buf); + + selftest_uinput_destroy(uidev); +} + +TEST(eviocgrep_get_repeat_settings) +{ + struct selftest_uinput *uidev; + int rep_values[2]; + int rc; + + memset(rep_values, 0, sizeof(rep_values)); + + rc = selftest_uinput_create_device(&uidev); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + /* ioctl to get the repeat rates values */ + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values); + /* should fail because EV_REP is not set */ + ASSERT_EQ(-1, rc); + + selftest_uinput_destroy(uidev); + + rc = selftest_uinput_create_device(&uidev, EV_REP, -1); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + /* ioctl to get the repeat rates values */ + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values); + ASSERT_EQ(0, rc); + /* should get the default delay and period values set by the kernel */ + ASSERT_EQ(rep_values[0], 250); + ASSERT_EQ(rep_values[1], 33); + + selftest_uinput_destroy(uidev); +} + +TEST(eviocsrep_set_repeat_settings) +{ + struct selftest_uinput *uidev; + int rep_values[2]; + int rc; + + memset(rep_values, 0, sizeof(rep_values)); + + rc = selftest_uinput_create_device(&uidev); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + /* ioctl to set the repeat rates values */ + rc = ioctl(uidev->evdev_fd, EVIOCSREP, rep_values); + /* should fail because EV_REP is not set */ + ASSERT_EQ(-1, rc); + + selftest_uinput_destroy(uidev); + + rc = selftest_uinput_create_device(&uidev, EV_REP, -1); + ASSERT_EQ(0, rc); + ASSERT_NE(NULL, uidev); + + /* ioctl to set the repeat rates values */ + rep_values[0] = 500; + rep_values[1] = 200; + rc = ioctl(uidev->evdev_fd, EVIOCSREP, rep_values); + ASSERT_EQ(0, rc); + + /* ioctl to get the repeat rates values */ + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values); + ASSERT_EQ(0, rc); + /* should get the delay and period values set previously */ + ASSERT_EQ(rep_values[0], 500); + ASSERT_EQ(rep_values[1], 200); + + selftest_uinput_destroy(uidev); +} + +TEST_HARNESS_MAIN -- 2.40.1

2 years, 4 months

3
2
0 0

[PATCH] selftests/mincore: fix skip condition for check_huge_pages test

by Ricardo Cañuelo

The check_huge_pages test was failing instead of skipping on qemu-armv7 because the skip condition wasn't handled properly. Add an additional check to fix it. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> Reported-by: Naresh Kamboju <naresh.kamboju(a)linaro.org> Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> Closes: https://lore.kernel.org/all/CA+G9fYuoB8Ug8PcTU-YGmemL7_eeEksXFihvxWF6OikD7s… --- tools/testing/selftests/mincore/mincore_selftest.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c index 4c88238fc8f0..6fb3eea5b6ee 100644 --- a/tools/testing/selftests/mincore/mincore_selftest.c +++ b/tools/testing/selftests/mincore/mincore_selftest.c @@ -150,8 +149,8 @@ TEST(check_huge_pages) MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0); if (addr == MAP_FAILED) { - if (errno == ENOMEM) - SKIP(return, "No huge pages available."); + if (errno == ENOMEM || errno == EINVAL) + SKIP(return, "No huge pages available or CONFIG_HUGETLB_PAGE disabled."); else TH_LOG("mmap error: %s", strerror(errno)); } -- 2.25.1

2 years, 4 months

3
3
0 0

[PATCH 0/4] selftests/nolibc: add user-space 'efault' handler

by Zhangjin Wu

Hi, Willy, Thomas This is not really for merge, but only let it work as a demo code to test whether it is possible to restore the next test when there is a bad pointer access in user-space [1]. Besides, a new 'run' command is added to 'NOLIBC_TEST' environment variable or arguments to control the running iterations, this may be used to test the reentrancy issues, but no failures found currently ;-) With glibc, it works as following: $ ./nolibc-test run:2,syscall:28-30,stdlib:1 Running iteration(s): 2 Current iteration: 1 Running test 'syscall', from 28 to 30 28 dup3_m1 = -1 EBADF [OK] 29 efault_handler ! 11 SIGSEGV [OK] 30 execve_root = -1 EACCES [OK] Errors during this test: 0 Running test 'stdlib' 1 getenv_blah = <(null)> [OK] Errors during this test: 0 Total number of errors in the 1 iteration(s): 0 Current iteration: 2 Running test 'syscall' 28 dup3_m1 = -1 EBADF [OK] 29 efault_handler ! 11 SIGSEGV [OK] 30 execve_root = -1 EACCES [OK] Errors during this test: 0 Running test 'stdlib' 1 getenv_blah = <(null)> [OK] Errors during this test: 0 Total number of errors in the 2 iteration(s): 0 With nolibc, it will be skipped (run:2,syscall:28-30,stdlib:10): Running iteration(s): 2 Current iteration: 1 Running test 'syscall', from 28 to 30 28 dup3_m1 = -1 EBADF [OK] 29 efault_handler [SKIPPED] 30 execve_root = -1 EACCES [OK] Errors during this test: 0 Running test 'stdlib', from 10 to 10 10 strrchr_foobar_o = <obar> [OK] Errors during this test: 0 Total number of errors in the 1 iteration(s): 0 Current iteration: 2 Running test 'syscall', from 28 to 30 28 dup3_m1 = -1 EBADF [OK] 29 efault_handler [SKIPPED] 30 execve_root = -1 EACCES [OK] Errors during this test: 0 Running test 'stdlib', from 10 to 10 10 strrchr_foobar_o = <obar> [OK] Errors during this test: 0 Total number of errors in the 2 iteration(s): 0 Best regards, Zhangjin --- [1]: https://lore.kernel.org/linux-riscv/20230529113143.GB2762@1wt.eu/ Zhangjin Wu (4): selftests/nolibc: allow rerun with the same settings selftests/nolibc: add rerun support selftests/nolibc: add user space efault handler selftests/nolibc: add user-space efault restore test case tools/testing/selftests/nolibc/nolibc-test.c | 247 +++++++++++++++++-- 1 file changed, 221 insertions(+), 26 deletions(-) -- 2.25.1

2 years, 4 months

3
8
0 0

[PATCH] tracing/selftests: Update synthetic event selftest to use common_stacktrace

by Steven Rostedt

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> With the rename of the stacktrace field to common_stacktrace, update the selftests to reflect this change. Copy the current selftest to test the backward compatibility "stacktrace" keyword. Also the "requires" of that test was incorrect, so it would never actually ran before. That is fixed now. Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- .../trigger-synthetic-event-stack-legacy.tc | 24 +++++++++++++++++++ .../trigger-synthetic-event-stack.tc | 5 ++-- 2 files changed, 26 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-stack-legacy.tc diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-stack-legacy.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-stack-legacy.tc new file mode 100644 index 000000000000..d0cd91a93069 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-stack-legacy.tc @@ -0,0 +1,24 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: event trigger - test inter-event histogram trigger trace action with dynamic string param (legacy stack) +# requires: set_event synthetic_events events/sched/sched_process_exec/hist "long[] stack' >> synthetic_events":README + +fail() { #msg + echo $1 + exit_fail +} + +echo "Test create synthetic event with stack" + +# Test the old stacktrace keyword (for backward compatibility) +echo 's:wake_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events +echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 1||prev_state == 2' >> events/sched/sched_switch/trigger +echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(wake_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger +echo 1 > events/synthetic/wake_lat/enable +sleep 1 + +if ! grep -q "=>.*sched" trace; then + fail "Failed to create synthetic event with stack" +fi + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-stack.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-stack.tc index 755dbe94ccf4..8f1cc9a86a06 100644 --- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-stack.tc +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-stack.tc @@ -1,7 +1,7 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 # description: event trigger - test inter-event histogram trigger trace action with dynamic string param -# requires: set_event synthetic_events events/sched/sched_process_exec/hist "long[]' >> synthetic_events":README +# requires: set_event synthetic_events events/sched/sched_process_exec/hist "can be any field, or the special string 'common_stacktrace'":README fail() { #msg echo $1 @@ -10,9 +10,8 @@ fail() { #msg echo "Test create synthetic event with stack" - echo 's:wake_lat pid_t pid; u64 delta; unsigned long[] stack;' > dynamic_events -echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace if prev_state == 1||prev_state == 2' >> events/sched/sched_switch/trigger +echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=common_stacktrace if prev_state == 1||prev_state == 2' >> events/sched/sched_switch/trigger echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(wake_lat,prev_pid,$delta,$s)' >> events/sched/sched_switch/trigger echo 1 > events/synthetic/wake_lat/enable sleep 1 -- 2.39.2

2 years, 4 months

3
2
0 0

Re: [Linux-kernel-mentorship] [PATCH] selftest: pidfd: Omit long and repeating outputs

by Christian Brauner

On Tue, May 23, 2023 at 11:22:07PM +0000, Ziqi Zhao wrote: > An output message: > > > # # waitpid WEXITSTATUS=0 > > will be printed for 30,000+ times in the `pidfd_test` selftest, which > does not seem ideal. This patch removes the print logic in the > `wait_for_pid` function, so each call to this function does not output > a line by default. Any existing call sites where the extra line might > be beneficial have been modified to include extra print statements > outside of the function calls. > > Signed-off-by: Ziqi Zhao <astrajoan(a)yahoo.com> > --- Fine by me, Reviewed-by: Christian Brauner <brauner(a)kernel.org>

2 years, 4 months

2
1
0 0

[PATCH] selftests: allow runners to override the timeout

by Luis Chamberlain

The default timeout for selftests tests is 45 seconds. Although we already have 13 settings for tests of about 96 sefltests which use a timeout greater than this, we want to try to avoid encouraging more tests to forcing a higher test timeout as selftests strives to run all tests quickly. Selftests also uses the timeout as a non-fatal error. Only tests runners which have control over a system would know if to treat a timeout as fatal or not. To help with all this: o Enhance documentation to avoid future increases of insane timeouts o Add the option to allow overriding the default timeout with test runners with a command line option Suggested-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Luis Chamberlain <mcgrof(a)kernel.org> --- Documentation/dev-tools/kselftest.rst | 22 +++++++++++++++++++++ tools/testing/selftests/kselftest/runner.sh | 11 ++++++++++- tools/testing/selftests/run_kselftest.sh | 5 +++++ 3 files changed, 37 insertions(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index 12b575b76b20..dd214af7b7ff 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -168,6 +168,28 @@ the `-t` option for specific single tests. Either can be used multiple times:: For other features see the script usage output, seen with the `-h` option. +Timeout for selftests +===================== + +Selftests are designed to be quick and so a default timeout is used of 45 +seconds for each test. Tests can override the default timeout by adding +a settings file in their directory and set a timeout variable there to the +configured a desired upper timeout for the test. Only a few tests override +the timeout with a value higher than 45 seconds, selftests strives to keep +it that way. Timeouts in selftests are not considered fatal because the +system under which a test runs may change and this can also modify the +expected time it takes to run a test. If you have control over the systems +which will run the tests you can configure a test runner on those systems to +use a greater or lower timeout on the command line as with the `-o` or +the `--override-timeout` argument. For example to use 165 seconds instead +one would use: + + $ ./run_kselftest.sh --override-timeout 165 + +You can look at the TAP output to see if you ran into the timeout. Test +runners which know a test must run under a specific time can then optionally +treat these timeouts then as fatal. + Packaging selftests =================== diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh index 294619ade49f..1c952d1401d4 100644 --- a/tools/testing/selftests/kselftest/runner.sh +++ b/tools/testing/selftests/kselftest/runner.sh @@ -8,7 +8,8 @@ export logfile=/dev/stdout export per_test_logging= # Defaults for "settings" file fields: -# "timeout" how many seconds to let each test run before failing. +# "timeout" how many seconds to let each test run before running +# over our soft timeout limit. export kselftest_default_timeout=45 # There isn't a shell-agnostic way to find the path of a sourced file, @@ -90,6 +91,14 @@ run_one() done < "$settings" fi + # Command line timeout overrides the settings file + if [ -n "$kselftest_override_timeout" ]; then + kselftest_timeout="$kselftest_override_timeout" + echo "# overriding timeout to $kselftest_timeout" >> "$logfile" + else + echo "# timeout set to $kselftest_timeout" >> "$logfile" + fi + TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST" echo "# $TEST_HDR_MSG" if [ ! -e "$TEST" ]; then diff --git a/tools/testing/selftests/run_kselftest.sh b/tools/testing/selftests/run_kselftest.sh index 97165a83df63..9a981b36bd7f 100755 --- a/tools/testing/selftests/run_kselftest.sh +++ b/tools/testing/selftests/run_kselftest.sh @@ -26,6 +26,7 @@ Usage: $0 [OPTIONS] -l | --list List the available collection:test entries -d | --dry-run Don't actually run any tests -h | --help Show this usage info + -o | --override-timeout Number of seconds after which we timeout EOF exit $1 } @@ -33,6 +34,7 @@ EOF COLLECTIONS="" TESTS="" dryrun="" +kselftest_override_timeout="" while true; do case "$1" in -s | --summary) @@ -51,6 +53,9 @@ while true; do -d | --dry-run) dryrun="echo" shift ;; + -o | --override-timeout) + kselftest_override_timeout="$2" + shift 2 ;; -h | --help) usage 0 ;; "") -- 2.39.2

2 years, 4 months

3
4
0 0

[PATCH v1 1/1] selftests: alsa: pcm-test: Fix compiler warnings about the format

by Mirsad Goran Todorovac

GCC 11.3.0 issues warnings in this module about wrong sizes of format specifiers: pcm-test.c: In function ‘test_pcm_time’: pcm-test.c:384:68: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 \ has type ‘unsigned int’ [-Wformat=] 384 | snprintf(msg, sizeof(msg), "rate mismatch %ld != %ld", rate, rrate); pcm-test.c:455:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \ type ‘long int’ [-Wformat=] 455 | "expected %d, wrote %li", rate, frames); pcm-test.c:462:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \ type ‘long int’ [-Wformat=] 462 | "expected %d, wrote %li", rate, frames); pcm-test.c:467:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \ type ‘long int’ [-Wformat=] 467 | "expected %d, wrote %li", rate, frames); Simple fix according to compiler's suggestion removed the warnings. Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac(a)alu.unizg.hr> --- tools/testing/selftests/alsa/pcm-test.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/alsa/pcm-test.c b/tools/testing/selftests/alsa/pcm-test.c index 3e390fe67eb9..b7eef32addb4 100644 --- a/tools/testing/selftests/alsa/pcm-test.c +++ b/tools/testing/selftests/alsa/pcm-test.c @@ -381,7 +381,7 @@ static void test_pcm_time(struct pcm_data *data, enum test_class class, goto __close; } if (rrate != rate) { - snprintf(msg, sizeof(msg), "rate mismatch %ld != %ld", rate, rrate); + snprintf(msg, sizeof(msg), "rate mismatch %ld != %d", rate, rrate); goto __close; } rperiod_size = period_size; @@ -447,24 +447,24 @@ static void test_pcm_time(struct pcm_data *data, enum test_class class, frames = snd_pcm_writei(handle, samples, rate); if (frames < 0) { snprintf(msg, sizeof(msg), - "Write failed: expected %d, wrote %li", rate, frames); + "Write failed: expected %ld, wrote %li", rate, frames); goto __close; } if (frames < rate) { snprintf(msg, sizeof(msg), - "expected %d, wrote %li", rate, frames); + "expected %ld, wrote %li", rate, frames); goto __close; } } else { frames = snd_pcm_readi(handle, samples, rate); if (frames < 0) { snprintf(msg, sizeof(msg), - "expected %d, wrote %li", rate, frames); + "expected %ld, wrote %li", rate, frames); goto __close; } if (frames < rate) { snprintf(msg, sizeof(msg), - "expected %d, wrote %li", rate, frames); + "expected %ld, wrote %li", rate, frames); goto __close; } } -- 2.34.1

2 years, 4 months

3
3
0 0

[PATCH] tools/nolibc: ensure fast64 integer types have 64 bits

by Thomas Weißschuh

On 32bit platforms size_t is not enough to represent [u]int_fast64_t. Fixes: 3e9fd4e9a1d5 ("tools/nolibc: add integer types and integer limit macros") Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Cc: Vincent Dagonneau <v(a)vda.io> Note: We could also fall back to compiler-provided data like: __UINT_FAST{8,16,32,64}_{TYPE,MIN,MAX}__ --- tools/include/nolibc/stdint.h | 4 ++-- tools/testing/selftests/nolibc/nolibc-test.c | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/include/nolibc/stdint.h b/tools/include/nolibc/stdint.h index c1ce4f5e0603..3fc418cfc3d7 100644 --- a/tools/include/nolibc/stdint.h +++ b/tools/include/nolibc/stdint.h @@ -36,8 +36,8 @@ typedef ssize_t int_fast16_t; typedef size_t uint_fast16_t; typedef ssize_t int_fast32_t; typedef size_t uint_fast32_t; -typedef ssize_t int_fast64_t; -typedef size_t uint_fast64_t; +typedef int64_t int_fast64_t; +typedef uint64_t uint_fast64_t; typedef int64_t intmax_t; typedef uint64_t uintmax_t; diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 7de46305f419..65be0317d184 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -696,9 +696,9 @@ int run_stdlib(int min, int max) CASE_TEST(limit_int_fast32_min); EXPECT_EQ(1, INT_FAST32_MIN, (int_fast32_t) INTPTR_MIN); break; CASE_TEST(limit_int_fast32_max); EXPECT_EQ(1, INT_FAST32_MAX, (int_fast32_t) INTPTR_MAX); break; CASE_TEST(limit_uint_fast32_max); EXPECT_EQ(1, UINT_FAST32_MAX, (uint_fast32_t) UINTPTR_MAX); break; - CASE_TEST(limit_int_fast64_min); EXPECT_EQ(1, INT_FAST64_MIN, (int_fast64_t) INTPTR_MIN); break; - CASE_TEST(limit_int_fast64_max); EXPECT_EQ(1, INT_FAST64_MAX, (int_fast64_t) INTPTR_MAX); break; - CASE_TEST(limit_uint_fast64_max); EXPECT_EQ(1, UINT_FAST64_MAX, (uint_fast64_t) UINTPTR_MAX); break; + CASE_TEST(limit_int_fast64_min); EXPECT_EQ(1, INT_FAST64_MIN, (int_fast64_t) INT64_MIN); break; + CASE_TEST(limit_int_fast64_max); EXPECT_EQ(1, INT_FAST64_MAX, (int_fast64_t) INT64_MAX); break; + CASE_TEST(limit_uint_fast64_max); EXPECT_EQ(1, UINT_FAST64_MAX, (uint_fast64_t) UINT64_MAX); break; #if __SIZEOF_LONG__ == 8 CASE_TEST(limit_intptr_min); EXPECT_EQ(1, INTPTR_MIN, (intptr_t) 0x8000000000000000LL); break; CASE_TEST(limit_intptr_max); EXPECT_EQ(1, INTPTR_MAX, (intptr_t) 0x7fffffffffffffffLL); break; --- base-commit: 5b21219d67d3483144d10332709d0c04f733ab93 change-id: 20230530-nolibc-fast64-8777cdbc7e01 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 years, 4 months

3
3
0 0

[PATCH] selftests/nolibc: test_fork: fix up duplicated print

by Zhangjin Wu

running nolibc-test with glibc on x86_64 got such print issue: 29 execve_root = -1 EACCES [OK] 30 fork30 fork = 0 [OK] 31 getdents64_root = 712 [OK] The fork test case has three printf calls: (1) llen += printf("%d %s", test, #name); (2) llen += printf(" = %d %s ", expr, errorname(errno)); (3) llen += pad_spc(llen, 64, "[FAIL]\n"); --> vfprintf() In the following scene, the above issue happens: (a) The parent calls (1) (b) The parent calls fork() (c) The child runs and shares the print buffer of (1) (d) The child exits, flushs the print buffer and closes its own stdout/stderr * "30 fork" is printed at the first time. (e) The parent calls (2) and (3), with "\n" in (3), it flushs the whole buffer * "30 fork = 0 ..." is printed Therefore, there are two "30 fork" in the stdout. Between (a) and (b), if flush the stdout (and the sterr), the child in stage (c) will not be able to 'see' the print buffer. Signed-off-by: Zhangjin Wu <falcon(a)tinylab.org> --- tools/testing/selftests/nolibc/nolibc-test.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 7de46305f419..88323a60aa4a 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -486,7 +486,13 @@ static int test_getpagesize(void) static int test_fork(void) { int status; - pid_t pid = fork(); + pid_t pid; + + /* flush the printf buffer to avoid child flush it */ + fflush(stdout); + fflush(stderr); + + pid = fork(); switch (pid) { case -1: -- 2.25.1

2 years, 4 months

3
3
0 0

[PATCH 0/2] drivers: base: Add tests showing devm handling inconsistencies

by Maxime Ripard

Hi, This follows the discussion here: https://lore.kernel.org/linux-kselftest/20230324123157.bbwvfq4gsxnlnfwb@hou… This shows a couple of inconsistencies with regard to how device-managed resources are cleaned up. Basically, devm resources will only be cleaned up if the device is attached to a bus and bound to a driver. Failing any of these cases, a call to device_unregister will not end up in the devm resources being released. We had to work around it in DRM to provide helpers to create a device for kunit tests, but the current discussion around creating similar, generic, helpers for kunit resumed interest in fixing this. This can be tested using the command: ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/base/test/ Let me know what you think, Maxime Signed-off-by: Maxime Ripard <maxime(a)cerno.tech> --- Maxime Ripard (2): drivers: base: Add basic devm tests for root devices drivers: base: Add basic devm tests for platform devices drivers/base/test/.kunitconfig | 2 + drivers/base/test/Kconfig | 4 + drivers/base/test/Makefile | 3 + drivers/base/test/platform-device-test.c | 278 +++++++++++++++++++++++++++++++ drivers/base/test/root-device-test.c | 120 +++++++++++++ 5 files changed, 407 insertions(+) --- base-commit: a6faf7ea9fcb7267d06116d4188947f26e00e57e change-id: 20230329-kunit-devm-inconsistencies-test-5e5a7d01e60d Best regards, -- Maxime Ripard <maxime(a)cerno.tech>

2 years, 4 months

3
8
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror May 2023