April 2023 - Linux-kselftest-mirror

by Naresh Kamboju

Following kernel warnings and crash notices on arm64 Rpi4 device while running selftests: gpio on Linux mainline 6.3.0-rc1 kernel and Linux next. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> Please refer to test log links for detailed test plan and kernel crash logs. It is reproducible on arm64 juno-r2, Rpi4 and Qualcomm dragonboard 410c and qemu-arm64. Test log: ----------- kselftest: Running tests in gpio TAP version 13 1..2 # selftests: gpio: gpio-mockup.sh # 1. Module load tests [ 61.176149] ============================================================================= [ 61.176802] [ 61.176807] ====================================================== [ 61.176809] WARNING: possible circular locking dependency detected [ 61.176811] 6.3.0-rc1-next-20230307 #1 Not tainted [ 61.176814] ------------------------------------------------------ [ 61.176816] modprobe/510 is trying to acquire lock: [ 61.176818] ffff80000b2284e8 (console_owner){..-.}-{0:0}, at: console_flush_all (kernel/printk/printk.c:2879 kernel/printk/printk.c:2942) [ 61.176846] [ 61.176846] but task is already holding lock: [ 61.176848] ffff000040000698 (&n->list_lock){-.-.}-{2:2}, at: get_partial_node.part.0 (mm/slub.c:2271) [ 61.176861] [ 61.176861] which lock already depends on the new lock. [ 61.176861] [ 61.176863] [ 61.176863] the existing dependency chain (in reverse order) is: [ 61.176864] [ 61.176864] -> #2 (&n->list_lock){-.-.}-{2:2}: [ 61.176871] lock_acquire (kernel/locking/lockdep.c:5673) [ 61.176879] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 61.176885] get_partial_node.part.0 (mm/slub.c:2271) [ 61.176890] ___slab_alloc (mm/slub.c:2268 mm/slub.c:2386 mm/slub.c:3188) [ 61.176894] __slab_alloc.constprop.0 (mm/slub.c:3292) [ 61.176899] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 61.176903] __kmalloc (mm/slab_common.c:968 mm/slab_common.c:980) [ 61.176908] tty_buffer_alloc (drivers/tty/tty_buffer.c:182) [ 61.176914] __tty_buffer_request_room (drivers/tty/tty_buffer.c:279) [ 61.176919] __tty_insert_flip_char (drivers/tty/tty_buffer.c:398) [ 61.176924] uart_insert_char (drivers/tty/serial/serial_core.c:3341) [ 61.176929] pl011_fifo_to_tty.isra.0 (drivers/tty/serial/amba-pl011.c:314) [ 61.176934] pl011_int (include/linux/spinlock.h:390 drivers/tty/serial/amba-pl011.c:1396 drivers/tty/serial/amba-pl011.c:1571) [ 61.176937] __handle_irq_event_percpu (kernel/irq/handle.c:158) [ 61.176941] handle_irq_event (kernel/irq/handle.c:193 kernel/irq/handle.c:210) [ 61.176944] handle_fasteoi_irq (kernel/irq/chip.c:716) [ 61.176950] generic_handle_domain_irq (kernel/irq/irqdesc.c:652 kernel/irq/irqdesc.c:707) [ 61.176953] gic_handle_irq (arch/arm64/include/asm/io.h:75 include/asm-generic/io.h:335 drivers/irqchip/irq-gic.c:344) [ 61.176958] call_on_irq_stack (arch/arm64/kernel/entry.S:905) [ 61.176962] do_interrupt_handler (arch/arm64/kernel/entry-common.c:274) [ 61.176968] el1_interrupt (arch/arm64/kernel/entry-common.c:472 arch/arm64/kernel/entry-common.c:486) [ 61.176971] el1h_64_irq_handler (arch/arm64/kernel/entry-common.c:492) [ 61.176975] el1h_64_irq (arch/arm64/kernel/entry.S:587) [ 61.176978] __kmem_cache_alloc_node (mm/slub.c:3490) [ 61.176983] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 61.176986] inet6_dump_fib (net/ipv6/ip6_fib.c:657) [ 61.176991] rtnl_dump_all (net/core/rtnetlink.c:3964) [ 61.176997] netlink_dump (net/netlink/af_netlink.c:2296) [ 61.177004] netlink_recvmsg (net/netlink/af_netlink.c:2024) [ 61.177009] ____sys_recvmsg (net/socket.c:1015 net/socket.c:1036 net/socket.c:2723) [ 61.177014] ___sys_recvmsg (net/socket.c:2765) [ 61.177019] __sys_recvmsg (include/linux/file.h:31 net/socket.c:2797) [ 61.177025] __arm64_sys_recvmsg (net/socket.c:2802) [ 61.177030] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 61.177037] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 61.177043] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 61.177049] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 61.177052] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 61.177055] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 61.177058] [ 61.177058] -> #1 (&port_lock_key){-.-.}-{2:2}: [ 61.177065] lock_acquire (kernel/locking/lockdep.c:5673) [ 61.177071] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 61.177074] serial8250_console_write (drivers/tty/serial/8250/8250_port.c:3394) [ 61.177082] univ8250_console_write (drivers/tty/serial/8250/8250_core.c:585) [ 61.177087] console_flush_all (kernel/printk/printk.c:2888 kernel/printk/printk.c:2942) [ 61.177093] console_unlock.part.0 (kernel/printk/printk.c:3017) [ 61.177098] vprintk_emit (kernel/printk/printk.c:2317) [ 61.177104] vprintk_default (kernel/printk/printk.c:2328) [ 61.177110] vprintk (kernel/printk/printk_safe.c:50) [ 61.177116] _printk (kernel/printk/printk.c:2341) [ 61.177121] register_console (kernel/printk/printk.c:3468) [ 61.177126] uart_add_one_port (drivers/tty/serial/serial_core.c:2579 drivers/tty/serial/serial_core.c:3100) [ 61.177130] serial8250_register_8250_port (drivers/tty/serial/8250/8250_core.c:1093) [ 61.177135] bcm2835aux_serial_probe (drivers/tty/serial/8250/8250_bcm2835aux.c:184) [ 61.177141] platform_probe (drivers/base/platform.c:1405) [ 61.177148] really_probe (drivers/base/dd.c:552 drivers/base/dd.c:631) [ 61.177152] __driver_probe_device (drivers/base/dd.c:768) [ 61.177157] driver_probe_device (drivers/base/dd.c:798) [ 61.177161] __driver_attach (drivers/base/dd.c:1185) [ 61.177166] bus_for_each_dev (drivers/base/bus.c:368) [ 61.177170] driver_attach (drivers/base/dd.c:1202) [ 61.177173] bus_add_driver (drivers/base/bus.c:673) [ 61.177177] driver_register (drivers/base/driver.c:246) [ 61.177182] __platform_driver_register (drivers/base/platform.c:868) [ 61.177188] bcm2835aux_serial_driver_init (drivers/tty/serial/8250/8250_bcm2835aux.c:233) [ 61.177195] do_one_initcall (init/main.c:1306) [ 61.177199] kernel_init_freeable (init/main.c:1378 init/main.c:1395 init/main.c:1414 init/main.c:1634) [ 61.177207] kernel_init (init/main.c:1524) [ 61.177212] ret_from_fork (arch/arm64/kernel/entry.S:871) [ 61.177216] [ 61.177216] -> #0 (console_owner){..-.}-{0:0}: [ 61.177222] __lock_acquire (kernel/locking/lockdep.c:3099 kernel/locking/lockdep.c:3217 kernel/locking/lockdep.c:3832 kernel/locking/lockdep.c:5056) [ 61.177228] lock_acquire.part.0 (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5671) [ 61.177233] lock_acquire (kernel/locking/lockdep.c:5673) [ 61.177238] console_flush_all (kernel/printk/printk.c:2883 kernel/printk/printk.c:2942) [ 61.177244] console_unlock.part.0 (kernel/printk/printk.c:3017) [ 61.177250] vprintk_emit (kernel/printk/printk.c:2317) [ 61.177255] vprintk_default (kernel/printk/printk.c:2328) [ 61.177261] vprintk (kernel/printk/printk_safe.c:50) [ 61.177267] _printk (kernel/printk/printk.c:2341) [ 61.177271] slab_bug (mm/slub.c:892) [ 61.177274] check_bytes_and_report (mm/slub.c:1054) [ 61.177279] check_object (mm/slub.c:1196 (discriminator 2)) [ 61.177283] alloc_debug_processing (mm/slub.c:1415 mm/slub.c:1425) [ 61.177287] get_partial_node.part.0 (mm/slub.c:2146 mm/slub.c:2279) [ 61.177291] ___slab_alloc (mm/slub.c:2268 mm/slub.c:2386 mm/slub.c:3188) [ 61.177295] __slab_alloc.constprop.0 (mm/slub.c:3292) [ 61.177300] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 61.177304] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 61.177308] device_add (drivers/base/core.c:3436 drivers/base/core.c:3486) [ 61.177311] platform_device_add (drivers/base/platform.c:717) [ 61.177317] platform_device_register_full (drivers/base/platform.c:844) [ 61.177323] gpio_mockup_register_chip+0x1ec/0x2b8 gpio_mockup [ 61.177342] gpio_mockup_init+0xf0/0xd40 gpio_mockup [ 61.177352] do_one_initcall (init/main.c:1306) [ 61.177356] do_init_module (kernel/module/main.c:2457) [ 61.177363] load_module (kernel/module/main.c:2859) [ 61.177369] __do_sys_finit_module (kernel/module/main.c:2961) [ 61.177375] __arm64_sys_finit_module (kernel/module/main.c:2928) [ 61.177381] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 61.177387] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 61.177393] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 61.177398] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 61.177402] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 61.177405] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 61.177408] [ 61.177408] other info that might help us debug this: [ 61.177408] [ 61.177410] Chain exists of: [ 61.177410] console_owner --> &port_lock_key --> &n->list_lock [ 61.177410] [ 61.177417] Possible unsafe locking scenario: [ 61.177417] [ 61.177418] CPU0 CPU1 [ 61.177419] ---- ---- [ 61.177420] lock(&n->list_lock); [ 61.177423] lock(&port_lock_key); [ 61.177426] lock(&n->list_lock); [ 61.177429] lock(console_owner); [ 61.177432] [ 61.177432] *** DEADLOCK *** [ 61.177432] [ 61.177434] 3 locks held by modprobe/510: [ 61.177436] #0: ffff000040000698 (&n->list_lock){-.-.}-{2:2}, at: get_partial_node.part.0 (mm/slub.c:2271) [ 61.177448] #1: ffff80000b227f18 (console_lock){+.+.}-{0:0}, at: vprintk_emit (kernel/printk/printk.c:1936 kernel/printk/printk.c:2315) [ 61.177460] #2: ffff80000b228388 (console_srcu){....}-{0:0}, at: console_flush_all (include/linux/srcu.h:200 kernel/printk/printk.c:290 kernel/printk/printk.c:2934) [ 61.177471] [ 61.177471] stack backtrace: [ 61.177474] CPU: 3 PID: 510 Comm: modprobe Not tainted 6.3.0-rc1-next-20230307 #1 [ 61.177479] Hardware name: Raspberry Pi 4 Model B (DT) [ 61.177482] Call trace: [ 61.177483] dump_backtrace (arch/arm64/kernel/stacktrace.c:160) [ 61.177487] show_stack (arch/arm64/kernel/stacktrace.c:167) [ 61.177490] dump_stack_lvl (lib/dump_stack.c:107) [ 61.177498] dump_stack (lib/dump_stack.c:114) [ 61.177504] print_circular_bug (kernel/locking/lockdep.c:2057) [ 61.177509] check_noncircular (kernel/locking/lockdep.c:2181) [ 61.177514] __lock_acquire (kernel/locking/lockdep.c:3099 kernel/locking/lockdep.c:3217 kernel/locking/lockdep.c:3832 kernel/locking/lockdep.c:5056) [ 61.177520] lock_acquire.part.0 (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5671) [ 61.177525] lock_acquire (kernel/locking/lockdep.c:5673) [ 61.177530] console_flush_all (kernel/printk/printk.c:2883 kernel/printk/printk.c:2942) [ 61.177536] console_unlock.part.0 (kernel/printk/printk.c:3017) [ 61.177542] vprintk_emit (kernel/printk/printk.c:2317) [ 61.177547] vprintk_default (kernel/printk/printk.c:2328) [ 61.177553] vprintk (kernel/printk/printk_safe.c:50) [ 61.177559] _printk (kernel/printk/printk.c:2341) [ 61.177564] slab_bug (mm/slub.c:892) [ 61.177567] check_bytes_and_report (mm/slub.c:1054) [ 61.177571] check_object (mm/slub.c:1196 (discriminator 2)) [ 61.177575] alloc_debug_processing (mm/slub.c:1415 mm/slub.c:1425) [ 61.177579] get_partial_node.part.0 (mm/slub.c:2146 mm/slub.c:2279) [ 61.177583] ___slab_alloc (mm/slub.c:2268 mm/slub.c:2386 mm/slub.c:3188) [ 61.177587] __slab_alloc.constprop.0 (mm/slub.c:3292) [ 61.177592] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 61.177596] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 61.177600] device_add (drivers/base/core.c:3436 drivers/base/core.c:3486) [ 61.177603] platform_device_add (drivers/base/platform.c:717) [ 61.177609] platform_device_register_full (drivers/base/platform.c:844) [ 61.177615] gpio_mockup_register_chip+0x1ec/0x2b8 gpio_mockup [ 61.177625] gpio_mockup_init+0xf0/0xd40 gpio_mockup [ 61.177634] do_one_initcall (init/main.c:1306) [ 61.177638] do_init_module (kernel/module/main.c:2457) [ 61.177644] load_module (kernel/module/main.c:2859) [ 61.177650] __do_sys_finit_module (kernel/module/main.c:2961) [ 61.177656] __arm64_sys_finit_module (kernel/module/main.c:2928) [ 61.177662] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 61.177668] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 61.177674] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 61.177680] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 61.177683] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 61.177686] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 62.011685] BUG kmalloc-512 (Not tainted): Poison overwritten [ 62.017513] ----------------------------------------------------------------------------- [ 62.017513] [ 62.027300] 0xffff00004ecb7a38-0xffff00004ecb7a47 @offset=31288. First byte 0x6a instead of 0x6b [ 62.036210] Allocated in swnode_register+0x40/0x218 age=808 cpu=3 pid=386 [ 62.043101] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 62.047784] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 62.051406] swnode_register (drivers/base/swnode.c:776) [ 62.055293] fwnode_create_software_node (drivers/base/swnode.c:934 (discriminator 4)) [ 62.060238] gpio_mockup_register_chip+0x1c4/0x2b8 gpio_mockup [ 62.066337] gpio_mockup_init+0xf0/0xd40 gpio_mockup [ 62.071551] do_one_initcall (init/main.c:1306) [ 62.075437] do_init_module (kernel/module/main.c:2457) [ 62.079238] load_module (kernel/module/main.c:2859) [ 62.083037] __do_sys_finit_module (kernel/module/main.c:2961) [ 62.087455] __arm64_sys_finit_module (kernel/module/main.c:2928) [ 62.092048] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 62.095848] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 62.100793] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 62.104151] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 62.107244] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 62.111570] Freed in software_node_release+0xdc/0x108 age=632 cpu=0 pid=428 [ 62.118633] __kmem_cache_free (mm/slub.c:3732 mm/slub.c:3788 mm/slub.c:3800) [ 62.122784] kfree (mm/slab_common.c:1020) [ 62.125788] software_node_release (drivers/base/swnode.c:761) [ 62.130204] kobject_put (lib/kobject.c:685 lib/kobject.c:712 include/linux/kref.h:65 lib/kobject.c:729) [ 62.133739] software_node_notify_remove (drivers/base/swnode.c:1093) [ 62.138597] device_del (drivers/base/core.c:2265 drivers/base/core.c:3778) [ 62.142134] platform_device_del.part.0 (drivers/base/platform.c:753) [ 62.146903] platform_device_unregister (drivers/base/platform.c:551 drivers/base/platform.c:794) [ 62.151672] gpio_mockup_exit+0x54/0x280 gpio_mockup [ 62.156888] __arm64_sys_delete_module (kernel/module/main.c:756 kernel/module/main.c:698 kernel/module/main.c:698) [ 62.161745] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 62.165545] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 62.170490] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 62.173850] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 62.176941] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 62.181267] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 62.184975] Slab 0xfffffc00013b2c00 objects=21 used=7 fp=0xffff00004ecb7400 flags=0x7fffc0000010200(slab|head|node=0|zone=1|lastcpupid=0xffff) [ 62.197943] Object 0xffff00004ecb7a00 @offset=31232 fp=0xffff00004ecb7400 [ 62.197943] [ 62.206325] Redzone ffff00004ecb7800: ... [ 63.089597] CPU: 3 PID: 510 Comm: modprobe Not tainted 6.3.0-rc1-next-20230307 #1 [ 63.097186] Hardware name: Raspberry Pi 4 Model B (DT) [ 63.102392] Call trace: [ 63.104865] dump_backtrace (arch/arm64/kernel/stacktrace.c:160) [ 63.108665] show_stack (arch/arm64/kernel/stacktrace.c:167) [ 63.112021] dump_stack_lvl (lib/dump_stack.c:107) [ 63.115734] dump_stack (lib/dump_stack.c:114) [ 63.119093] print_trailer (mm/slub.c:953) [ 63.122892] check_bytes_and_report (mm/slub.c:1058) [ 63.127395] check_object (mm/slub.c:1196 (discriminator 2)) [ 63.131104] alloc_debug_processing (mm/slub.c:1415 mm/slub.c:1425) [ 63.135606] get_partial_node.part.0 (mm/slub.c:2146 mm/slub.c:2279) [ 63.140286] ___slab_alloc (mm/slub.c:2268 mm/slub.c:2386 mm/slub.c:3188) [ 63.144084] __slab_alloc.constprop.0 (mm/slub.c:3292) [ 63.148674] __kmem_cache_alloc_node (mm/slub.c:3345 mm/slub.c:3442 mm/slub.c:3491) [ 63.153354] kmalloc_trace (mm/slab_common.c:1064 (discriminator 4)) [ 63.156974] device_add (drivers/base/core.c:3436 drivers/base/core.c:3486) [ 63.160508] platform_device_add (drivers/base/platform.c:717) [ 63.164837] platform_device_register_full (drivers/base/platform.c:844) [ 63.169959] gpio_mockup_register_chip+0x1ec/0x2b8 gpio_mockup [ 63.176057] gpio_mockup_init+0xf0/0xd40 gpio_mockup [ 63.181269] do_one_initcall (init/main.c:1306) [ 63.185155] do_init_module (kernel/module/main.c:2457) [ 63.188956] load_module (kernel/module/main.c:2859) [ 63.192755] __do_sys_finit_module (kernel/module/main.c:2961) [ 63.197171] __arm64_sys_finit_module (kernel/module/main.c:2928) [ 63.201765] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:57) [ 63.205565] el0_svc_common.constprop.0 (arch/arm64/kernel/syscall.c:149) [ 63.210510] do_el0_svc (arch/arm64/kernel/syscall.c:194) [ 63.213869] el0_svc (arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:142 arch/arm64/kernel/entry-common.c:638) [ 63.216961] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:656) [ 63.221287] el0t_64_sync (arch/arm64/kernel/entry.S:591) [ 63.224998] FIX kmalloc-512: Restoring Poison 0xffff00004ecb7a38-0xffff00004ecb7a47=0x6b [ 63.233202] FIX kmalloc-512: Marking all objects used [ 63.399213] ============================================================================= links to the crash: - https://lkft.validation.linaro.org/scheduler/job/6224830#L1291 - https://lkft.validation.linaro.org/scheduler/job/6224742#L1202 - https://lkft.validation.linaro.org/scheduler/job/6224784#L3415 - https://lkft.validation.linaro.org/scheduler/job/6224810#L2029 metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git_sha: 709c6adf19dc558e44ab5c01659b09a16a2d3c82 git_describe: next-20230307 kernel_version: 6.3.0-rc1 kernel-config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2MfXESbRAbSUj9oic6d8… build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/798095907 artifact-location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2MfXESbRAbSUj9oic6d8… toolchain: gcc-11 -- Linaro LKFT https://lkft.linaro.org

1 year, 1 month

5
8
0 0

[PATCH v2 0/7] Split a folio to any lower order folios

by Zi Yan

From: Zi Yan <ziy(a)nvidia.com> Hi all, File folio supports any order and people would like to support flexible orders for anonymous folio[1] too. Currently, split_huge_page() only splits a huge page to order-0 pages, but splitting to orders higher than 0 is also useful. This patchset adds support for splitting a huge page to any lower order pages and uses it during folio truncate operations. The patchset is on top of mm-everything-2023-03-27-21-20. Changelog from v1 === 1. Changed split_page_memcg() and split_page_owner() parameter to use order 2. Used folio_test_pmd_mappable() in place of the equivalent code Details === * Patch 1 changes split_page_memcg() to use order instead of nr_pages * Patch 2 changes split_page_owner() to use order instead of nr_pages * Patch 3 and 4 add new_order parameter split_page_memcg() and split_page_owner() and prepare for upcoming changes. * Patch 5 adds split_huge_page_to_list_to_order() to split a huge page to any lower order. The original split_huge_page_to_list() calls split_huge_page_to_list_to_order() with new_order = 0. * Patch 6 uses split_huge_page_to_list_to_order() in large pagecache folio truncation instead of split the large folio all the way down to order-0. * Patch 7 adds a test API to debugfs and test cases in split_huge_page_test selftests. Comments and/or suggestions are welcome. [1] https://lore.kernel.org/linux-mm/Y%2FblF0GIunm+pRIC@casper.infradead.org/ Zi Yan (7): mm/memcg: use order instead of nr in split_page_memcg() mm/page_owner: use order instead of nr in split_page_owner() mm: memcg: make memcg huge page split support any order split. mm: page_owner: add support for splitting to any order in split page_owner. mm: thp: split huge page to any lower order pages. mm: truncate: split huge page cache page to a non-zero order if possible. mm: huge_memory: enable debugfs to split huge pages to any order. include/linux/huge_mm.h | 10 +- include/linux/memcontrol.h | 4 +- include/linux/page_owner.h | 10 +- mm/huge_memory.c | 137 ++++++++--- mm/memcontrol.c | 10 +- mm/page_alloc.c | 8 +- mm/page_owner.c | 10 +- mm/truncate.c | 21 +- .../selftests/mm/split_huge_page_test.c | 225 +++++++++++++++++- 9 files changed, 366 insertions(+), 69 deletions(-) -- 2.39.2

1 year, 4 months

4
13
0 0

[PATCH 0/1] Possible bug in zram on ppc64le on vfat

by Petr Vorel

Hi all, following bug is trying to workaround an error on ppc64le, where zram01.sh LTP test (there is also kernel selftest tools/testing/selftests/zram/zram01.sh, but LTP test got further updates) has often mem_used_total 0 although zram is already filled. Patch tries to repeatedly read /sys/block/zram*/mm_stat for 1 sec, waiting for mem_used_total > 0. The question if this is expected and should be workarounded or a bug which should be fixed. REPRODUCE THE ISSUE Quickest way to install only zram tests and their dependencies: make autotools && ./configure && for i in testcases/lib/ testcases/kernel/device-drivers/zram/; do cd $i && make -j$(getconf _NPROCESSORS_ONLN) && make install && cd -; done Run the test (only on vfat) PATH="/opt/ltp/testcases/bin:$PATH" LTP_SINGLE_FS_TYPE=vfat zram01.sh Petr Vorel (1): zram01.sh: Workaround division by 0 on vfat on ppc64le .../kernel/device-drivers/zram/zram01.sh | 27 +++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) -- 2.38.0

1 year, 4 months

5
19
0 0

Re: [PATCH -next] selftests/landlock: Fix selftest ptrace_test run fail

by Mickaël Salaün

I checked and the Landlock ptrace test failed because Yama is enabled, which is expected. You can check that with /proc/sys/kernel/yama/ptrace_scope Jeff Xu sent a patch to fix this case but it is not ready yet: https://lore.kernel.org/r/20220628222941.2642917-1-jeffxu@google.com Could you please send a new patch Jeff, and add Limin in Cc? On 29/11/2022 12:26, limin wrote: > cat /proc/cmdline > BOOT_IMAGE=/vmlinuz-6.1.0-next-20221116 > root=UUID=a65b3a79-dc02-4728-8a0c-5cf24f4ae08b ro > systemd.unified_cgroup_hierarchy=1 cgroup_no_v1=all > > > config > > # > # Automatically generated file; DO NOT EDIT. > # Linux/x86 6.1.0-rc6 Kernel Configuration > # [...] > CONFIG_SECURITY_YAMA=y [...] > CONFIG_LSM="landlock,lockdown,yama,integrity,apparmor" [...] > > On 2022/11/29 19:03, Mickaël Salaün wrote: >> I tested with next-20221116 and all tests are OK. Could you share your >> kernel configuration with a link? What is the content of /proc/cmdline? >> >> On 29/11/2022 02:42, limin wrote: >>> I run test on Linux ubuntu2204 6.1.0-next-20221116 >>> >>> I did't use yama. >>> >>> you can reproduce by this step: >>> >>> cd kernel_src >>> >>> cd tools/testing/selftests/landlock/ >>> make >>> ./ptrace_test >>> >>> >>> >>> >>> On 2022/11/29 3:44, Mickaël Salaün wrote: >>>> This patch changes the test semantic and then cannot work on my test >>>> environment. On which kernel did you run test? Do you use Yama or >>>> something similar? >>>> >>>> On 28/11/2022 03:04, limin wrote: >>>>> Tests PTRACE_ATTACH and PTRACE_MODE_READ on the parent, >>>>> trace parent return -1 when child== 0 >>>>> How to reproduce warning: >>>>> $ make -C tools/testing/selftests TARGETS=landlock run_tests >>>>> >>>>> Signed-off-by: limin <limin100(a)huawei.com> >>>>> --- >>>>> tools/testing/selftests/landlock/ptrace_test.c | 5 ++--- >>>>> 1 file changed, 2 insertions(+), 3 deletions(-) >>>>> >>>>> diff --git a/tools/testing/selftests/landlock/ptrace_test.c >>>>> b/tools/testing/selftests/landlock/ptrace_test.c >>>>> index c28ef98ff3ac..88c4dc63eea0 100644 >>>>> --- a/tools/testing/selftests/landlock/ptrace_test.c >>>>> +++ b/tools/testing/selftests/landlock/ptrace_test.c >>>>> @@ -267,12 +267,11 @@ TEST_F(hierarchy, trace) >>>>> /* Tests PTRACE_ATTACH and PTRACE_MODE_READ on the >>>>> parent. */ >>>>> err_proc_read = test_ptrace_read(parent); >>>>> ret = ptrace(PTRACE_ATTACH, parent, NULL, 0); >>>>> + EXPECT_EQ(-1, ret); >>>>> + EXPECT_EQ(EPERM, errno); >>>>> if (variant->domain_child) { >>>>> - EXPECT_EQ(-1, ret); >>>>> - EXPECT_EQ(EPERM, errno); >>>>> EXPECT_EQ(EACCES, err_proc_read); >>>>> } else { >>>>> - EXPECT_EQ(0, ret); >>>>> EXPECT_EQ(0, err_proc_read); >>>>> } >>>>> if (ret == 0) {

1 year, 4 months

2
2
0 0

[PATCH v5 0/9] drm: selftest: Convert to KUnit

by Maíra Canal

Hi everyone, Here is the v5 of the conversion of selftests to KUnit. Since the v4, the only fix was checking the checkpatch warnings and checks (Thank you Javier). Thanks for your attention and any feedback is welcomed! Best Regards, - Maíra Canal v1 -> v2: https://lore.kernel.org/dri-devel/20220615135824.15522-1-maira.canal@usp.br… - The suites not longer end in _tests (David Gow). - Remove the TODO entry involving the conversion of selftests to KUnit (Javier Martinez Canillas). - Change the filenames to match the documentation: use *_test.c (Javier Martinez Canillas). - Add MODULE_LICENSE to all tests (kernel test robot). - Make use of a generic symbol to group all tests - DRM_KUNIT_TEST (Javier Martinez Canillas). - Add .kunitconfig on the first patch (it was on the second patch of the series). - Straightforward conversion of the drm_cmdline_parser tests without functional changes (Shuah Khan) - Add David's Tested-by tags. v2 -> v3: https://lore.kernel.org/dri-devel/20220621200926.257002-1-maira.canal@usp.b… - Rebase it on top of the drm-misc-next with drm_format_helper KUnit tests. - Change KUNIT_EXPECT_FALSE to KUNIT_EXPECT_EQ on drm_format_test (Daniel Latypov). - Add Daniel's Acked-by tag. v3 -> v4: https://lore.kernel.org/dri-devel/9185aadb-e459-00fe-70be-3675f6f3ef4c@redh… - Add blank line after #include <kunit/test.h> (Javier Martinez Canillas). - Make the order of the tags chronological (Javier Martinez Canillas). - Add Copywrite to the tests (Javier Martinez Canillas). - Add Javier Martinez Canillas's Reviewed-By tag. v4 -> v5: https://lore.kernel.org/dri-devel/20220702131116.457444-1-maira.canal@usp.b… - Fix checkpatch warnings and checks (Javier Martinez Canillas). Arthur Grillo (1): drm: selftest: convert drm_mm selftest to KUnit Maíra Canal (8): drm: selftest: convert drm_damage_helper selftest to KUnit drm: selftest: convert drm_cmdline_parser selftest to KUnit drm: selftest: convert drm_rect selftest to KUnit drm: selftest: convert drm_format selftest to KUnit drm: selftest: convert drm_plane_helper selftest to KUnit drm: selftest: convert drm_dp_mst_helper selftest to KUnit drm: selftest: convert drm_framebuffer selftest to KUnit drm: selftest: convert drm_buddy selftest to KUnit Documentation/gpu/todo.rst | 11 - drivers/gpu/drm/Kconfig | 20 +- drivers/gpu/drm/Makefile | 1 - drivers/gpu/drm/selftests/Makefile | 8 - .../gpu/drm/selftests/drm_buddy_selftests.h | 15 - .../gpu/drm/selftests/drm_cmdline_selftests.h | 68 - drivers/gpu/drm/selftests/drm_mm_selftests.h | 28 - .../gpu/drm/selftests/drm_modeset_selftests.h | 40 - drivers/gpu/drm/selftests/drm_selftest.c | 109 -- drivers/gpu/drm/selftests/drm_selftest.h | 41 - drivers/gpu/drm/selftests/test-drm_buddy.c | 994 ------------- .../drm/selftests/test-drm_cmdline_parser.c | 1141 --------------- .../drm/selftests/test-drm_damage_helper.c | 668 --------- drivers/gpu/drm/selftests/test-drm_format.c | 280 ---- .../drm/selftests/test-drm_modeset_common.c | 32 - .../drm/selftests/test-drm_modeset_common.h | 52 - drivers/gpu/drm/selftests/test-drm_rect.c | 223 --- drivers/gpu/drm/tests/Makefile | 4 +- drivers/gpu/drm/tests/drm_buddy_test.c | 756 ++++++++++ .../gpu/drm/tests/drm_cmdline_parser_test.c | 1078 ++++++++++++++ .../gpu/drm/tests/drm_damage_helper_test.c | 634 +++++++++ .../drm_dp_mst_helper_test.c} | 89 +- drivers/gpu/drm/tests/drm_format_test.c | 287 ++++ .../drm_framebuffer_test.c} | 77 +- .../test-drm_mm.c => tests/drm_mm_test.c} | 1248 +++++++---------- .../drm_plane_helper_test.c} | 122 +- drivers/gpu/drm/tests/drm_rect_test.c | 214 +++ 27 files changed, 3652 insertions(+), 4588 deletions(-) delete mode 100644 drivers/gpu/drm/selftests/Makefile delete mode 100644 drivers/gpu/drm/selftests/drm_buddy_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_cmdline_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_mm_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_modeset_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.c delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_buddy.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_cmdline_parser.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_damage_helper.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_format.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_rect.c create mode 100644 drivers/gpu/drm/tests/drm_buddy_test.c create mode 100644 drivers/gpu/drm/tests/drm_cmdline_parser_test.c create mode 100644 drivers/gpu/drm/tests/drm_damage_helper_test.c rename drivers/gpu/drm/{selftests/test-drm_dp_mst_helper.c => tests/drm_dp_mst_helper_test.c} (72%) create mode 100644 drivers/gpu/drm/tests/drm_format_test.c rename drivers/gpu/drm/{selftests/test-drm_framebuffer.c => tests/drm_framebuffer_test.c} (86%) rename drivers/gpu/drm/{selftests/test-drm_mm.c => tests/drm_mm_test.c} (55%) rename drivers/gpu/drm/{selftests/test-drm_plane_helper.c => tests/drm_plane_helper_test.c} (57%) create mode 100644 drivers/gpu/drm/tests/drm_rect_test.c -- 2.35.3

1 year, 4 months

10
25
0 0

[KTAP V2 PATCH] ktap_v2: add test metadata

by Rae Moar

Add specification for declaring test metadata to the KTAP v2 spec. The purpose of test metadata is to allow for the declaration of essential testing information in KTAP output. This information includes test names, test configuration info, test attributes, and test files. There have been similar ideas around the idea of test metadata such as test prefixes and test name lines. However, I propose this specification as an overall fix for these issues. These test metadata lines are a form of diagnostic lines with the format: "# <metadata_type>: <data>". As a type of diagnostic line, test metadata lines are compliant with KTAP v1, which will help to not interfere too much with current parsers. Specifically the "# Subtest:" line is derived from the TAP 14 spec: https://testanything.org/tap-version-14-specification.html. The proposed location for test metadata is in the test header, between the version line and the test plan line. Note including diagnostic lines in the test header is a depature from KTAP v1. This location provides two main benefits: First, metadata will be printed prior to when subtests are run. Then if a test fails, test metadata can help discern which test is causing the issue and potentially why. Second, this location ensures that the lines will not be accidentally parsed as a subtest's diagnostic lines because the lines are bordered by the version line and plan line. Here is an example of test metadata: KTAP version 2 # Config: CONFIG_TEST=y 1..1 KTAP version 2 # Subtest: test_suite # File: /sys/kernel/... # Attributes: slow # Other: example_test 1..2 ok 1 test_1 ok 2 test_2 ok 1 test_suite Here is a link to a version of the KUnit parser that is able to parse test metadata lines for KTAP version 2. Note this includes test metadata lines for the main level of KTAP. Link: https://kunit-review.googlesource.com/c/linux/+/5809 Signed-off-by: Rae Moar <rmoar(a)google.com> --- Hi everyone, I would like to use this proposal similar to an RFC to gather ideas on the topic of test metadata. Let me know what you think. I am also interested in brainstorming a list of recognized metadata types. Providing recognized metadata types would be helpful in parsing and displaying test metadata in a useful way. Current ideas: - "# Subtest: <test_name>" to indicate test name (name must match corresponding result line) - "# Attributes: <attributes list>" to indicate test attributes (list separated by commas) - "# File: <file_path>" to indicate file used in testing Any other ideas? Note this proposal replaces two of my previous proposals: "ktap_v2: add recognized test name line" and "ktap_v2: allow prefix to KTAP lines." Thanks! -Rae Note: this patch is based on Frank's ktap_spec_version_2 branch. Documentation/dev-tools/ktap.rst | 51 ++++++++++++++++++++++++++++++-- 1 file changed, 48 insertions(+), 3 deletions(-) diff --git a/Documentation/dev-tools/ktap.rst b/Documentation/dev-tools/ktap.rst index ff77f4aaa6ef..a2d0a196c115 100644 --- a/Documentation/dev-tools/ktap.rst +++ b/Documentation/dev-tools/ktap.rst @@ -17,7 +17,9 @@ KTAP test results describe a series of tests (which may be nested: i.e., test can have subtests), each of which can contain both diagnostic data -- e.g., log lines -- and a final result. The test structure and results are machine-readable, whereas the diagnostic data is unstructured and is there to -aid human debugging. +aid human debugging. One exception to this is test metadata lines - a type +of diagnostic lines. Test metadata is located between the version line and +plan line of a test and can be machine-readable. KTAP output is built from four different types of lines: - Version lines @@ -28,8 +30,7 @@ KTAP output is built from four different types of lines: In general, valid KTAP output should also form valid TAP output, but some information, in particular nested test results, may be lost. Also note that there is a stagnant draft specification for TAP14, KTAP diverges from this in -a couple of places (notably the "Subtest" header), which are described where -relevant later in this document. +a couple of places, which are described where relevant later in this document. Version lines ------------- @@ -166,6 +167,45 @@ even if they do not start with a "#": this is to capture any other useful kernel output which may help debug the test. It is nevertheless recommended that tests always prefix any diagnostic output they have with a "#" character. +Test metadata lines +------------------- + +Test metadata lines are a type of diagnostic lines used to the declare the +name of a test and other helpful testing information in the test header. +These lines are often helpful for parsing and for providing context during +crashes. + +Test metadata lines must follow the format: "# <metadata_type>: <data>". +These lines must be located between the version line and the plan line +within a test header. + +There are a few currently recognized metadata types: +- "# Subtest: <test_name>" to indicate test name (name must match + corresponding result line) +- "# Attributes: <attributes list>" to indicate test attributes (list + separated by commas) +- "# File: <file_path>" to indicate file used in testing + +As a rule, the "# Subtest:" line is generally first to declare the test +name. Note that metadata lines do not necessarily need to use a +recognized metadata type. + +An example of using metadata lines: + +:: + + KTAP version 2 + 1..1 + # File: /sys/kernel/... + KTAP version 2 + # Subtest: example + # Attributes: slow, example_test + 1..1 + ok 1 test_1 + # example passed + ok 1 example + + Unknown lines ------------- @@ -206,6 +246,7 @@ An example of a test with two nested subtests: KTAP version 2 1..1 KTAP version 2 + # Subtest: example 1..2 ok 1 test_1 not ok 2 test_2 @@ -219,6 +260,7 @@ An example format with multiple levels of nested testing: KTAP version 2 1..2 KTAP version 2 + # Subtest: example_test_1 1..2 KTAP version 2 1..2 @@ -254,6 +296,7 @@ Example KTAP output KTAP version 2 1..1 KTAP version 2 + # Subtest: main_test 1..3 KTAP version 2 1..1 @@ -261,11 +304,13 @@ Example KTAP output ok 1 test_1 ok 1 example_test_1 KTAP version 2 + # Attributes: slow 1..2 ok 1 test_1 # SKIP test_1 skipped ok 2 test_2 ok 2 example_test_2 KTAP version 2 + # Subtest: example_test_3 1..3 ok 1 test_1 # test_2: FAIL base-commit: 906f02e42adfbd5ae70d328ee71656ecb602aaf5 -- 2.40.0.396.gfff15efe05-goog

1 year, 5 months

3
6
0 0

ww_mutex.sh hangs since v5.16-rc1

by Li Zhijian

Hi Folks LKP/0Day found that ww_mutex.sh cannot complete since v5.16-rc1, but I'm pretty sorry that we failed to bisect the FBC, instead, the bisection pointed to a/below merge commit(91e1c99e17) finally. Due to this hang, other tests in the same group are also blocked in 0Day, we hope we can fix this hang ASAP. So if you have any idea about this, or need more debug information, feel free to let me know :) BTW, ww_mutex.sh was failed in v5.15 without hang, and looks it cannot reproduce on a vm. Our box: root@lkp-knm01 ~# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 46 bits physical, 48 bits virtual CPU(s): 288 On-line CPU(s) list: 0-287 Thread(s) per core: 4 Core(s) per socket: 72 Socket(s): 1 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 133 Model name: Intel(R) Xeon Phi(TM) CPU 7295 @ 1.50GHz Stepping: 0 CPU MHz: 1385.255 CPU max MHz: 1600.0000 CPU min MHz: 1000.0000 BogoMIPS: 2992.76 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K NUMA node0 CPU(s): 0-287 NUMA node1 CPU(s): Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ring3mwait cpuid_fault epb pti tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms avx512f rdseed adx avx512pf avx512er avx512cd xsaveopt dtherm ida arat pln pts avx512_vpopcntdq avx512_4vnniw avx512_4fmaps Below the call stack in v5.16-rc2 [ 1000.374954][ T2713] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-136057256686de39cc3a07c2e39ef6bc43003ff6/tools/testing/selftests/locking' [ 1000.375030][ T2713] [ 1000.428791][ T2713] 2021-11-22 22:21:27 make run_tests -C locking [ 1000.428864][ T2713] [ 1000.491043][ T2713] make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-136057256686de39cc3a07c2e39ef6bc43003ff6/tools/testing/selftests/locking' [ 1000.491121][ T2713] [ 1000.540807][ T2713] TAP version 13 [ 1000.540882][ T2713] [ 1000.576050][ T2713] 1..1 [ 1000.576282][ T2713] [ 1000.612980][ T2713] # selftests: locking: ww_mutex.sh [ 1000.613288][ T2713] [ 1495.201324][ T1577] INFO: task kworker/u576:16:1470 blocked for more than 491 seconds. [ 1495.220059][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1495.240902][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1495.265617][ T1577] task:kworker/u576:16 state:D stack: 0 pid: 1470 ppid: 2 flags:0x00004000 [ 1495.289054][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1495.310936][ T1577] Call Trace: [ 1495.327809][ T1577] <TASK> [ 1495.344735][ T1577] __schedule+0xdb0/0x25c0 [ 1495.362764][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1495.382013][ T1577] ? lock_downgrade+0x680/0x680 [ 1495.400894][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1495.418866][ T1577] schedule+0xe4/0x280 [ 1495.435597][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1495.454588][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1495.476189][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1495.497763][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1495.518959][ T1577] ? lock_downgrade+0x680/0x680 [ 1495.536861][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1495.556253][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1495.574003][ T1577] ww_mutex_lock+0x3e/0x380 [ 1495.591958][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1495.612260][ T1577] ? stress_reorder_work+0xa00/0xa00 [test_ww_mutex] [ 1495.632857][ T1577] ? 0xffffffff81000000 [ 1495.649027][ T1577] ? rcu_read_lock_sched_held+0x5f/0x100 [ 1495.668211][ T1577] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 1495.687010][ T1577] process_one_work+0x817/0x13c0 [ 1495.704991][ T1577] ? rcu_read_unlock+0x40/0x40 [ 1495.723024][ T1577] ? pwq_dec_nr_in_flight+0x280/0x280 [ 1495.740211][ T1577] ? rwlock_bug+0xc0/0xc0 [ 1495.758038][ T1577] worker_thread+0x8b/0xd80 [ 1495.775008][ T1577] ? process_one_work+0x13c0/0x13c0 [ 1495.793017][ T1577] kthread+0x3b9/0x4c0 [ 1495.810782][ T1577] ? set_kthread_struct+0x100/0x100 [ 1495.829988][ T1577] ret_from_fork+0x22/0x30 [ 1495.845811][ T1577] </TASK> [ 1495.859087][ T1577] INFO: task kworker/u576:36:1490 blocked for more than 492 seconds. [ 1495.879048][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1495.897879][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1495.919582][ T1577] task:kworker/u576:36 state:D stack: 0 pid: 1490 ppid: 2 flags:0x00004000 [ 1495.941865][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1495.959889][ T1577] Call Trace: [ 1495.974816][ T1577] <TASK> [ 1495.988759][ T1577] __schedule+0xdb0/0x25c0 [ 1495.988759][ T1577] __schedule+0xdb0/0x25c0 [ 1496.003849][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1496.020839][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.036854][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1496.051976][ T1577] schedule+0xe4/0x280 [ 1496.067780][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1496.085004][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1496.101895][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.119889][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1496.137873][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.152657][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1496.168773][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1496.184862][ T1577] ww_mutex_lock+0x3e/0x380 [ 1496.199979][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.216277][ T1577] ? stress_reorder_work+0xa00/0xa00 [test_ww_mutex] [ 1496.234904][ T1577] ? 0xffffffff81000000 [ 1496.249856][ T1577] ? rcu_read_lock_sched_held+0x5f/0x100 [ 1496.265951][ T1577] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 1496.282815][ T1577] process_one_work+0x817/0x13c0 [ 1496.299791][ T1577] ? rcu_read_unlock+0x40/0x40 [ 1496.314754][ T1577] ? pwq_dec_nr_in_flight+0x280/0x280 [ 1496.331779][ T1577] ? rwlock_bug+0xc0/0xc0 [ 1496.348007][ T1577] worker_thread+0x8b/0xd80 [ 1496.362905][ T1577] ? process_one_work+0x13c0/0x13c0 [ 1496.378975][ T1577] kthread+0x3b9/0x4c0 [ 1496.393866][ T1577] ? set_kthread_struct+0x100/0x100 [ 1496.408827][ T1577] ret_from_fork+0x22/0x30 [ 1496.423901][ T1577] </TASK> [ 1496.437994][ T1577] INFO: task kworker/u576:0:15113 blocked for more than 492 seconds. [ 1496.455862][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1496.473759][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1496.494808][ T1577] task:kworker/u576:0 state:D stack: 0 pid:15113 ppid: 2 flags:0x00004000 [ 1496.517000][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1496.537035][ T1577] Call Trace: [ 1496.551187][ T1577] <TASK> [ 1496.566405][ T1577] __schedule+0xdb0/0x25c0 [ 1496.582012][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1496.598049][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.615360][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1496.631835][ T1577] schedule+0xe4/0x280 [ 1496.645972][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1496.663774][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1496.681795][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.698731][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1496.714996][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.730888][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1496.747926][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1496.762482][ T1577] ww_mutex_lock+0x3e/0x380 [ 1496.778844][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] And, we found that it occasionally hangs on v5.16-rc3 (1/3 runs), below is a good dmesg. [ 962.136756][ T2950] make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' [ 962.136831][ T2950]- [ 962.205036][ T2950] TAP version 13 [ 962.206003][ T2950]- [ 962.298458][ T2950] 1..1 [ 962.299657][ T2950]- [ 962.345588][ T2950] # selftests: locking: ww_mutex.sh [ 962.345657][ T2950]- [ 973.641869][T25509] All ww mutex selftests passed [ 973.773996][ T2950] # locking/ww_mutex: ok [ 973.774068][ T2950]- [ 973.774236][ T2960] # locking/ww_mutex: ok [ 973.802355][ T2960]- [ 973.829966][ T2950] ok 1 selftests: locking: ww_mutex.sh [ 973.834748][ T2950]- [ 973.838302][ T2960] ok 1 selftests: locking: ww_mutex.sh [ 973.899815][ T2960]- [ 973.921431][ T2950] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' [ 973.932312][ T2950]- [ 973.957345][ T2960] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' Thanks Zhijian@0Day

1 year, 5 months

3
3
0 0

[PATCH -next] selftests/ptrace: Fix Test terminated by timeout in ptrace_attach

by limin

That is an open issue Bernd Edlinger wrote the test case in anticipation that all of patch series got accepted,but the last patch was not picked up for inclusion in the linux kernel. How to reproduce warning: $ make -C tools/testing/selftests TARGETS=ptrace run_tests Example vmaccess from 6.1.0-next source tree run fail on bare metal RUN global.attach ... attach: Test terminated by timeout FAIL global.attach Link:https://lore.kernel.org/all/AM8PR10MB4708E6FF0E155261455064C2E4209@AM8… Fixes: 2de4e82318c7 ("selftests/ptrace: add test cases for dead-locks") Signed-off-by: limin <limin100(a)huawei.com> --- tools/testing/selftests/ptrace/vmaccess.c | 37 ++++++++--------------- 1 file changed, 13 insertions(+), 24 deletions(-) diff --git a/tools/testing/selftests/ptrace/vmaccess.c b/tools/testing/selftests/ptrace/vmaccess.c index 4db327b44586..751a41f1163c 100644 --- a/tools/testing/selftests/ptrace/vmaccess.c +++ b/tools/testing/selftests/ptrace/vmaccess.c @@ -45,42 +45,31 @@ TEST(vmaccess) TEST(attach) { - int s, k, pid = fork(); + int k; + int s; + pid_t pid = fork(); if (!pid) { - pthread_t pt; - - pthread_create(&pt, NULL, thread, NULL); - pthread_join(pt, NULL); + ptrace(PTRACE_TRACEME, 0, NULL, NULL); execlp("sleep", "sleep", "2", NULL); } sleep(1); k = ptrace(PTRACE_ATTACH, pid, 0L, 0L); - ASSERT_EQ(errno, EAGAIN); + printf("k1:%d\n", k); + ASSERT_EQ(k, -1); + waitpid(pid, &s, WNOHANG); ASSERT_EQ(k, -1); - k = waitpid(-1, &s, WNOHANG); - ASSERT_NE(k, -1); ASSERT_NE(k, 0); ASSERT_NE(k, pid); - ASSERT_EQ(WIFEXITED(s), 1); - ASSERT_EQ(WEXITSTATUS(s), 0); - sleep(1); - k = ptrace(PTRACE_ATTACH, pid, 0L, 0L); - ASSERT_EQ(k, 0); - k = waitpid(-1, &s, 0); - ASSERT_EQ(k, pid); + if (WIFEXITED(s)) + ASSERT_EQ(WEXITSTATUS(s), 0); + if (WIFSTOPPED(s)) + ASSERT_EQ(WSTOPSIG(s), SIGTRAP); ASSERT_EQ(WIFSTOPPED(s), 1); - ASSERT_EQ(WSTOPSIG(s), SIGSTOP); - k = ptrace(PTRACE_DETACH, pid, 0L, 0L); - ASSERT_EQ(k, 0); - k = waitpid(-1, &s, 0); - ASSERT_EQ(k, pid); - ASSERT_EQ(WIFEXITED(s), 1); - ASSERT_EQ(WEXITSTATUS(s), 0); - k = waitpid(-1, NULL, 0); + sleep(1); + ptrace(PTRACE_CONT, pid, NULL, NULL); ASSERT_EQ(k, -1); - ASSERT_EQ(errno, ECHILD); } TEST_HARNESS_MAIN -- 2.33.0

1 year, 5 months

4
3
0 0

[PATCH v8 0/5] mm/memfd: introduce MFD_NOEXEC_SEAL and MFD_EXEC

by jeffxu＠chromium.org

From: Jeff Xu <jeffxu(a)google.com> Since Linux introduced the memfd feature, memfd have always had their execute bit set, and the memfd_create() syscall doesn't allow setting it differently. However, in a secure by default system, such as ChromeOS, (where all executables should come from the rootfs, which is protected by Verified boot), this executable nature of memfd opens a door for NoExec bypass and enables “confused deputy attack”. E.g, in VRP bug [1]: cros_vm process created a memfd to share the content with an external process, however the memfd is overwritten and used for executing arbitrary code and root escalation. [2] lists more VRP in this kind. On the other hand, executable memfd has its legit use, runc uses memfd’s seal and executable feature to copy the contents of the binary then execute them, for such system, we need a solution to differentiate runc's use of executable memfds and an attacker's [3]. To address those above, this set of patches add following: 1> Let memfd_create() set X bit at creation time. 2> Let memfd to be sealed for modifying X bit. 3> A new pid namespace sysctl: vm.memfd_noexec to control the behavior of X bit.For example, if a container has vm.memfd_noexec=2, then memfd_create() without MFD_NOEXEC_SEAL will be rejected. 4> A new security hook in memfd_create(). This make it possible to a new LSM, which rejects or allows executable memfd based on its security policy. Change history: v8: - Update ref bug in cover letter. - Add Reviewed-by field. - Remove security hook (security_memfd_create) patch, which will have its own patch set in future. v7: - patch 2/6: remove #ifdef and MAX_PATH (memfd_test.c). - patch 3/6: check capability (CAP_SYS_ADMIN) from userns instead of global ns (pid_sysctl.h). Add a tab (pid_namespace.h). - patch 5/6: remove #ifdef (memfd_test.c) - patch 6/6: remove unneeded security_move_mount(security.c). v6:https://lore.kernel.org/lkml/20221206150233.1963717-1-jeffxu@google.com/ - Address comment and move "#ifdef CONFIG_" from .c file to pid_sysctl.h v5:https://lore.kernel.org/lkml/20221206152358.1966099-1-jeffxu@google.com/ - Pass vm.memfd_noexec from current ns to child ns. - Fix build issue detected by kernel test robot. - Add missing security.c v3:https://lore.kernel.org/lkml/20221202013404.163143-1-jeffxu@google.com/ - Address API design comments in v2. - Let memfd_create() to set X bit at creation time. - A new pid namespace sysctl: vm.memfd_noexec to control behavior of X bit. - A new security hook in memfd_create(). v2:https://lore.kernel.org/lkml/20220805222126.142525-1-jeffxu@google.com/ - address comments in V1. - add sysctl (vm.mfd_noexec) to set the default file permissions of memfd_create to be non-executable. v1:https://lwn.net/Articles/890096/ [1] https://crbug.com/1305267 [2] https://bugs.chromium.org/p/chromium/issues/list?q=type%3Dbug-security%20me… [3] https://lwn.net/Articles/781013/ Daniel Verkamp (2): mm/memfd: add F_SEAL_EXEC selftests/memfd: add tests for F_SEAL_EXEC Jeff Xu (3): mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC mm/memfd: Add write seals when apply SEAL_EXEC to executable memfd selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC include/linux/pid_namespace.h | 19 ++ include/uapi/linux/fcntl.h | 1 + include/uapi/linux/memfd.h | 4 + kernel/pid_namespace.c | 5 + kernel/pid_sysctl.h | 59 ++++ mm/memfd.c | 56 +++- mm/shmem.c | 6 + tools/testing/selftests/memfd/fuse_test.c | 1 + tools/testing/selftests/memfd/memfd_test.c | 341 ++++++++++++++++++++- 9 files changed, 489 insertions(+), 3 deletions(-) create mode 100644 kernel/pid_sysctl.h base-commit: eb7081409f94a9a8608593d0fb63a1aa3d6f95d8 -- 2.39.0.rc1.256.g54fd8350bd-goog

1 year, 5 months

4
11
0 0

[PATCH v2 0/4] KVM: selftests: add powerpc support

by Nicholas Piggin

This series adds initial KVM selftests support for powerpc (64-bit, BookS, radix MMU). Since v1: - Update MAINTAINERS KVM PPC entry to include kvm selftests. - Fixes and cleanups from Sean's review including new patch 1. - Add 4K guest page support requiring new patch 2. Thanks, Nick Nicholas Piggin (4): KVM: selftests: Move pgd_created check into virt_pgd_alloc KVM: selftests: Add aligned guest physical page allocator KVM: PPC: selftests: add support for powerpc KVM: PPC: selftests: add selftests sanity tests MAINTAINERS | 2 + tools/testing/selftests/kvm/Makefile | 15 + .../selftests/kvm/include/kvm_util_base.h | 27 ++ .../selftests/kvm/include/powerpc/hcall.h | 21 + .../selftests/kvm/include/powerpc/ppc_asm.h | 32 ++ .../selftests/kvm/include/powerpc/processor.h | 33 ++ .../selftests/kvm/lib/aarch64/processor.c | 4 - tools/testing/selftests/kvm/lib/guest_modes.c | 3 + tools/testing/selftests/kvm/lib/kvm_util.c | 56 ++- .../selftests/kvm/lib/powerpc/handlers.S | 93 ++++ .../testing/selftests/kvm/lib/powerpc/hcall.c | 45 ++ .../selftests/kvm/lib/powerpc/processor.c | 429 ++++++++++++++++++ .../testing/selftests/kvm/lib/powerpc/ucall.c | 30 ++ .../selftests/kvm/lib/riscv/processor.c | 4 - .../selftests/kvm/lib/s390x/processor.c | 4 - .../selftests/kvm/lib/x86_64/processor.c | 7 +- tools/testing/selftests/kvm/powerpc/helpers.h | 46 ++ .../testing/selftests/kvm/powerpc/null_test.c | 166 +++++++ .../selftests/kvm/powerpc/rtas_hcall.c | 146 ++++++ 19 files changed, 1129 insertions(+), 34 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/powerpc/hcall.h create mode 100644 tools/testing/selftests/kvm/include/powerpc/ppc_asm.h create mode 100644 tools/testing/selftests/kvm/include/powerpc/processor.h create mode 100644 tools/testing/selftests/kvm/lib/powerpc/handlers.S create mode 100644 tools/testing/selftests/kvm/lib/powerpc/hcall.c create mode 100644 tools/testing/selftests/kvm/lib/powerpc/processor.c create mode 100644 tools/testing/selftests/kvm/lib/powerpc/ucall.c create mode 100644 tools/testing/selftests/kvm/powerpc/helpers.h create mode 100644 tools/testing/selftests/kvm/powerpc/null_test.c create mode 100644 tools/testing/selftests/kvm/powerpc/rtas_hcall.c -- 2.40.0

1 year, 6 months

3
7
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror April 2023