December 2023 - Linux-kselftest-mirror

by Suren Baghdasaryan

This patch series introduces UFFDIO_MOVE feature to userfaultfd, which has long been implemented and maintained by Andrea in his local tree [1], but was not upstreamed due to lack of use cases where this approach would be better than allocating a new page and copying the contents. Previous upstraming attempts could be found at [6] and [7]. UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application needs pages to be allocated [2]. However, with UFFDIO_MOVE, if pages are available (in userspace) for recycling, as is usually the case in heap compaction algorithms, then we can avoid the page allocation and memcpy (done by UFFDIO_COPY). Also, since the pages are recycled in the userspace, we avoid the need to release (via madvise) the pages back to the kernel [3]. We see over 40% reduction (on a Google pixel 6 device) in the compacting thread’s completion time by using UFFDIO_MOVE vs. UFFDIO_COPY. This was measured using a benchmark that emulates a heap compaction implementation using userfaultfd (to allow concurrent accesses by application threads). More details of the usecase are explained in [3]. Furthermore, UFFDIO_MOVE enables moving swapped-out pages without touching them within the same vma. Today, it can only be done by mremap, however it forces splitting the vma. TODOs for follow-up improvements: - cross-mm support. Known differences from single-mm and missing pieces: - memcg recharging (might need to isolate pages in the process) - mm counters - cross-mm deposit table moves - cross-mm test - document the address space where src and dest reside in struct uffdio_move - TLB flush batching. Will require extensive changes to PTL locking in move_pages_pte(). OTOH that might let us reuse parts of mremap code. Changes since v5 [10]: - added logic to split large folios in move_pages_pte(), per David Hildenbrand - added check for PAE before split_huge_pmd() to avoid the split if the move operation can't be done - replaced calls to default_huge_page_size() with read_pmd_pagesize() in uffd_move_pmd test, per David Hildenbrand - fixed the condition in uffd_move_test_common() checking if area alignment is needed Changes since v4 [9]: - added Acked-by in patch 1, per Peter Xu - added description for ctx, mm and mode parameters of move_pages(), per kernel test robot - added Reviewed-by's, per Peter Xu and Axel Rasmussen - removed unused operations in uffd_test_case_ops - refactored uffd-unit-test changes to avoid using global variables and handle pmd moves without page size overrides, per Peter Xu Changes since v3 [8]: - changed retry path in folio_lock_anon_vma_read() to unlock and then relock RCU, per Peter Xu - removed cross-mm support from initial patchset, per David Hildenbrand - replaced BUG_ONs with VM_WARN_ON or WARN_ON_ONCE, per David Hildenbrand - added missing cache flushing, per Lokesh Gidra and Peter Xu - updated manpage text in the patch description, per Peter Xu - renamed internal functions from "remap" to "move", per Peter Xu - added mmap_changing check after taking mmap_lock, per Peter Xu - changed uffd context check to ensure dst_mm is registered onto uffd we are operating on, Peter Xu and David Hildenbrand - changed to non-maybe variants of maybe*_mkwrite(), per David Hildenbrand - fixed warning for CONFIG_TRANSPARENT_HUGEPAGE=n, per kernel test robot - comments cleanup, per David Hildenbrand and Peter Xu - checks for VM_IO,VM_PFNMAP,VM_HUGETLB,..., per David Hildenbrand - prevent moving pinned pages, per Peter Xu - changed uffd tests to call move uffd_test_ctx_clear() at the end of the test run instead of in the beginning of the next run - added support for testcase-specific ops - added test for moving PMD-aligned blocks Changes since v2 [5]: - renamed UFFDIO_REMAP to UFFDIO_MOVE, per David Hildenbrand - rebase over mm-unstable to use folio_move_anon_rmap(), per David Hildenbrand - added text for manpage explaining DONTFORK and KSM requirements for this feature, per David Hildenbrand - check for anon_vma changes in the fast path of folio_lock_anon_vma_read, per Peter Xu - updated the title and description of the first patch, per David Hildenbrand - updating comments in folio_lock_anon_vma_read() explaining the need for anon_vma checks, per David Hildenbrand - changed all mapcount checks to PageAnonExclusive, per Jann Horn and David Hildenbrand - changed counters in remap_swap_pte() from MM_ANONPAGES to MM_SWAPENTS, per Jann Horn - added a check for PTE change after folio is locked in remap_pages_pte(), per Jann Horn - added handling of PMD migration entries and bailout when pmd_devmap(), per Jann Horn - added checks to ensure both src and dst VMAs are writable, per Peter Xu - added UFFD_FEATURE_MOVE, per Peter Xu - removed obsolete comments, per Peter Xu - renamed remap_anon_pte to remap_present_pte, per Peter Xu - added a comment for folio_get_anon_vma() explaining the need for anon_vma checks, per Peter Xu - changed error handling in remap_pages() to make it more clear, per Peter Xu - changed EFAULT to EAGAIN to retry when a hugepage appears or disappears from under us, per Peter Xu - added links to previous upstreaming attempts, per David Hildenbrand Changes since v1 [4]: - add mmget_not_zero in userfaultfd_remap, per Jann Horn - removed extern from function definitions, per Matthew Wilcox - converted to folios in remap_pages_huge_pmd, per Matthew Wilcox - use PageAnonExclusive in remap_pages_huge_pmd, per David Hildenbrand - handle pgtable transfers between MMs, per Jann Horn - ignore concurrent A/D pte bit changes, per Jann Horn - split functions into smaller units, per David Hildenbrand - test for folio_test_large in remap_anon_pte, per Matthew Wilcox - use pte_swp_exclusive for swapcount check, per David Hildenbrand - eliminated use of mmu_notifier_invalidate_range_start_nonblock, per Jann Horn - simplified THP alignment checks, per Jann Horn - refactored the loop inside remap_pages, per Jann Horn - additional clarifying comments, per Jann Horn Main changes since Andrea's last version [1]: - Trivial translations from page to folio, mmap_sem to mmap_lock - Replace pmd_trans_unstable() with pte_offset_map_nolock() and handle its possible failure - Move pte mapping into remap_pages_pte to allow for retries when source page or anon_vma is contended. Since pte_offset_map_nolock() start RCU read section, we can't block anymore after mapping a pte, so have to unmap the ptesm do the locking and retry. - Add and use anon_vma_trylock_write() to avoid blocking while in RCU read section. - Accommodate changes in mmu_notifier_range_init() API, switch to mmu_notifier_invalidate_range_start_nonblock() to avoid blocking while in RCU read section. - Open-code now removed __swp_swapcount() - Replace pmd_read_atomic() with pmdp_get_lockless() - Add new selftest for UFFDIO_MOVE [1] https://gitlab.com/aarcange/aa/-/commit/2aec7aea56b10438a3881a20a411aa4b1fc… [2] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redha… [3] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyj… [4] https://lore.kernel.org/all/20230914152620.2743033-1-surenb@google.com/ [5] https://lore.kernel.org/all/20230923013148.1390521-1-surenb@google.com/ [6] https://lore.kernel.org/all/1425575884-2574-21-git-send-email-aarcange@redh… [7] https://lore.kernel.org/all/cover.1547251023.git.blake.caldwell@colorado.ed… [8] https://lore.kernel.org/all/20231009064230.2952396-1-surenb@google.com/ [9] https://lore.kernel.org/all/20231028003819.652322-1-surenb@google.com/ [10] https://lore.kernel.org/all/20231121171643.3719880-1-surenb@google.com/ Andrea Arcangeli (2): mm/rmap: support move to different root anon_vma in folio_move_anon_rmap() userfaultfd: UFFDIO_MOVE uABI Suren Baghdasaryan (3): selftests/mm: call uffd_test_ctx_clear at the end of the test selftests/mm: add uffd_test_case_ops to allow test case-specific operations selftests/mm: add UFFDIO_MOVE ioctl test Documentation/admin-guide/mm/userfaultfd.rst | 3 + fs/userfaultfd.c | 72 +++ include/linux/rmap.h | 5 + include/linux/userfaultfd_k.h | 11 + include/uapi/linux/userfaultfd.h | 29 +- mm/huge_memory.c | 122 ++++ mm/khugepaged.c | 3 + mm/rmap.c | 30 + mm/userfaultfd.c | 614 +++++++++++++++++++ tools/testing/selftests/mm/uffd-common.c | 39 +- tools/testing/selftests/mm/uffd-common.h | 9 + tools/testing/selftests/mm/uffd-stress.c | 5 +- tools/testing/selftests/mm/uffd-unit-tests.c | 192 ++++++ 13 files changed, 1130 insertions(+), 4 deletions(-) -- 2.43.0.rc2.451.g8631bc7472-goog

2 days, 3 hours

7
43
0 0

[PATCH] tools: Copy linux/align.h into tools/

by Ackerley Tng

This provides alignment macros for use in selftests. Also clean up tools/include/linux/bitmap.h's inline definition of IS_ALIGNED(). Signed-off-by: Ackerley Tng <ackerleytng(a)google.com> --- tools/include/linux/align.h | 15 +++++++++++++++ tools/include/linux/bitmap.h | 2 +- 2 files changed, 16 insertions(+), 1 deletion(-) create mode 100644 tools/include/linux/align.h diff --git a/tools/include/linux/align.h b/tools/include/linux/align.h new file mode 100644 index 000000000000..2b4acec7b95a --- /dev/null +++ b/tools/include/linux/align.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_ALIGN_H +#define _LINUX_ALIGN_H + +#include <linux/const.h> + +/* @a is a power of 2 value */ +#define ALIGN(x, a) __ALIGN_KERNEL((x), (a)) +#define ALIGN_DOWN(x, a) __ALIGN_KERNEL((x) - ((a) - 1), (a)) +#define __ALIGN_MASK(x, mask) __ALIGN_KERNEL_MASK((x), (mask)) +#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) +#define PTR_ALIGN_DOWN(p, a) ((typeof(p))ALIGN_DOWN((unsigned long)(p), (a))) +#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0) + +#endif /* _LINUX_ALIGN_H */ diff --git a/tools/include/linux/bitmap.h b/tools/include/linux/bitmap.h index f3566ea0f932..8c6852dba04f 100644 --- a/tools/include/linux/bitmap.h +++ b/tools/include/linux/bitmap.h @@ -3,6 +3,7 @@ #define _TOOLS_LINUX_BITMAP_H #include <string.h> +#include <linux/align.h> #include <linux/bitops.h> #include <linux/find.h> #include <stdlib.h> @@ -126,7 +127,6 @@ static inline bool bitmap_and(unsigned long *dst, const unsigned long *src1, #define BITMAP_MEM_ALIGNMENT (8 * sizeof(unsigned long)) #endif #define BITMAP_MEM_MASK (BITMAP_MEM_ALIGNMENT - 1) -#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0) static inline bool bitmap_equal(const unsigned long *src1, const unsigned long *src2, unsigned int nbits) -- 2.39.2.722.g9855ee24e9-goog

8 months

2
3
0 0

[PATCH v3] lib: Convert test_user_copy to KUnit test

by Vitor Massaru Iha

This adds the conversion of the runtime tests of test_user_copy fuctions, from `lib/test_user_copy.c`to KUnit tests. Signed-off-by: Vitor Massaru Iha <vitor(a)massaru.org> --- v2: * splitted patch in 3: - Allows to install and load modules in root filesystem; - Provides an userspace memory context when tests are compiled as module; - Convert test_user_copy to KUnit test; * removed entry for CONFIG_TEST_USER_COPY; * replaced pr_warn to KUNIT_EXPECT_FALSE_MSG in test macro to decrease the diff; v3: * rebased with last kunit branch * Please apply this commit from kunit-fixes: 3f37d14b8a3152441f36b6bc74000996679f0998 And these from patchwork: https://patchwork.kernel.org/patch/11676331/ https://patchwork.kernel.org/patch/11676335/ --- lib/Kconfig.debug | 28 ++++++++------ lib/Makefile | 2 +- lib/{test_user_copy.c => user_copy_kunit.c} | 42 +++++++++------------ 3 files changed, 35 insertions(+), 37 deletions(-) rename lib/{test_user_copy.c => user_copy_kunit.c} (91%) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 9ad9210d70a1..f699a3624ae7 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2078,18 +2078,6 @@ config TEST_VMALLOC If unsure, say N. -config TEST_USER_COPY - tristate "Test user/kernel boundary protections" - depends on m - help - This builds the "test_user_copy" module that runs sanity checks - on the copy_to/from_user infrastructure, making sure basic - user/kernel boundary testing is working. If it fails to load, - a regression has been detected in the user/kernel memory boundary - protections. - - If unsure, say N. - config TEST_BPF tristate "Test BPF filter functionality" depends on m && NET @@ -2154,6 +2142,22 @@ config SYSCTL_KUNIT_TEST If unsure, say N. +config USER_COPY_KUNIT + tristate "KUnit Test for user/kernel boundary protections" + depends on KUNIT + depends on m + help + This builds the "user_copy_kunit" module that runs sanity checks + on the copy_to/from_user infrastructure, making sure basic + user/kernel boundary testing is working. If it fails to load, + a regression has been detected in the user/kernel memory boundary + protections. + + For more information on KUnit and unit tests in general please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. + config LIST_KUNIT_TEST tristate "KUnit Test for Kernel Linked-list structures" if !KUNIT_ALL_TESTS depends on KUNIT diff --git a/lib/Makefile b/lib/Makefile index b1c42c10073b..8c145f85accc 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -78,7 +78,6 @@ obj-$(CONFIG_TEST_VMALLOC) += test_vmalloc.o obj-$(CONFIG_TEST_OVERFLOW) += test_overflow.o obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o obj-$(CONFIG_TEST_SORT) += test_sort.o -obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o obj-$(CONFIG_TEST_PRINTF) += test_printf.o @@ -318,3 +317,4 @@ obj-$(CONFIG_OBJAGG) += objagg.o # KUnit tests obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o +obj-$(CONFIG_USER_COPY_KUNIT) += user_copy_kunit.o diff --git a/lib/test_user_copy.c b/lib/user_copy_kunit.c similarity index 91% rename from lib/test_user_copy.c rename to lib/user_copy_kunit.c index 5ff04d8fe971..a10ddd15b4cd 100644 --- a/lib/test_user_copy.c +++ b/lib/user_copy_kunit.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/uaccess.h> #include <linux/vmalloc.h> +#include <kunit/test.h> /* * Several 32-bit architectures support 64-bit {get,put}_user() calls. @@ -35,7 +36,7 @@ ({ \ int cond = (condition); \ if (cond) \ - pr_warn("[%d] " msg "\n", __LINE__, ##__VA_ARGS__); \ + KUNIT_EXPECT_FALSE_MSG(test, cond, msg, ##__VA_ARGS__); \ cond; \ }) @@ -44,7 +45,7 @@ static bool is_zeroed(void *from, size_t size) return memchr_inv(from, 0x0, size) == NULL; } -static int test_check_nonzero_user(char *kmem, char __user *umem, size_t size) +static int test_check_nonzero_user(struct kunit *test, char *kmem, char __user *umem, size_t size) { int ret = 0; size_t start, end, i, zero_start, zero_end; @@ -102,7 +103,7 @@ static int test_check_nonzero_user(char *kmem, char __user *umem, size_t size) return ret; } -static int test_copy_struct_from_user(char *kmem, char __user *umem, +static int test_copy_struct_from_user(struct kunit *test, char *kmem, char __user *umem, size_t size) { int ret = 0; @@ -177,7 +178,7 @@ static int test_copy_struct_from_user(char *kmem, char __user *umem, return ret; } -static int __init test_user_copy_init(void) +static void user_copy_test(struct kunit *test) { int ret = 0; char *kmem; @@ -192,16 +193,14 @@ static int __init test_user_copy_init(void) #endif kmem = kmalloc(PAGE_SIZE * 2, GFP_KERNEL); - if (!kmem) - return -ENOMEM; + KUNIT_EXPECT_FALSE_MSG(test, kmem == NULL, "kmalloc failed"); user_addr = vm_mmap(NULL, 0, PAGE_SIZE * 2, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_ANONYMOUS | MAP_PRIVATE, 0); if (user_addr >= (unsigned long)(TASK_SIZE)) { - pr_warn("Failed to allocate user memory\n"); kfree(kmem); - return -ENOMEM; + KUNIT_FAIL(test, "Failed to allocate user memory"); } usermem = (char __user *)user_addr; @@ -245,9 +244,9 @@ static int __init test_user_copy_init(void) #undef test_legit /* Test usage of check_nonzero_user(). */ - ret |= test_check_nonzero_user(kmem, usermem, 2 * PAGE_SIZE); + ret |= test_check_nonzero_user(test, kmem, usermem, 2 * PAGE_SIZE); /* Test usage of copy_struct_from_user(). */ - ret |= test_copy_struct_from_user(kmem, usermem, 2 * PAGE_SIZE); + ret |= test_copy_struct_from_user(test, kmem, usermem, 2 * PAGE_SIZE); /* * Invalid usage: none of these copies should succeed. @@ -309,23 +308,18 @@ static int __init test_user_copy_init(void) vm_munmap(user_addr, PAGE_SIZE * 2); kfree(kmem); - - if (ret == 0) { - pr_info("tests passed.\n"); - return 0; - } - - return -EINVAL; } -module_init(test_user_copy_init); - -static void __exit test_user_copy_exit(void) -{ - pr_info("unloaded.\n"); -} +static struct kunit_case user_copy_test_cases[] = { + KUNIT_CASE(user_copy_test), + {} +}; -module_exit(test_user_copy_exit); +static struct kunit_suite user_copy_test_suite = { + .name = "user_copy", + .test_cases = user_copy_test_cases, +}; +kunit_test_suites(&user_copy_test_suite); MODULE_AUTHOR("Kees Cook <keescook(a)chromium.org>"); MODULE_LICENSE("GPL"); base-commit: d43c7fb05765152d4d4a39a8ef957c4ea14d8847 -- 2.26.2

8 months, 3 weeks

4
11
0 0

[PATCH 0/2] selftests/nolibc: run-user improvements

by Thomas Weißschuh

A small bugfix for "run-user XARCH=ppc64le" and run-user support for run-tests.sh. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (2): selftests/nolibc: introduce QEMU_ARCH_USER selftests/nolibc: run-tests.sh: enable testing via qemu-user tools/testing/selftests/nolibc/Makefile | 5 ++++- tools/testing/selftests/nolibc/run-tests.sh | 22 +++++++++++++++++++--- 2 files changed, 23 insertions(+), 4 deletions(-) --- base-commit: ba335752620565c25c3028fff9496bb8ef373602 change-id: 20770915-nolibc-run-user-845375a3ec4f Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

8 months, 3 weeks

5
8
0 0

[RFC PATCH v5 00/29] TDX KVM selftests

by Sagi Shahar

Hello, This is v4 of the patch series for TDX selftests. It has been updated for Intel’s v17 of the TDX host patches which was proposed here: https://lore.kernel.org/all/cover.1699368322.git.isaku.yamahata@intel.com/ The tree can be found at: https://github.com/googleprodkernel/linux-cc/tree/tdx-selftests-rfc-v5 Changes from RFC v4: Added patch to propagate KVM_EXIT_MEMORY_FAULT to userspace. Minor tweaks to align the tests to the new TDX 1.5 spec such as changes in the expected values in TDG.VP.INFO. In RFCv5, TDX selftest code is organized into: + headers in tools/testing/selftests/kvm/include/x86_64/tdx/ + common code in tools/testing/selftests/kvm/lib/x86_64/tdx/ + selftests in tools/testing/selftests/kvm/x86_64/tdx_* Dependencies + Peter’s patches, which provide functions for the host to allocate and track protected memory in the guest. https://lore.kernel.org/all/20230110175057.715453-1-pgonda@google.com/ Further work for this patch series/TODOs + Sean’s comments for the non-confidential UPM selftests patch series at https://lore.kernel.org/lkml/Y8dC8WDwEmYixJqt@google.com/T/#u apply here as well + Add ucall support for TDX selftests I would also like to acknowledge the following people, who helped review or test patches in previous versions: + Sean Christopherson <seanjc(a)google.com> + Zhenzhong Duan <zhenzhong.duan(a)intel.com> + Peter Gonda <pgonda(a)google.com> + Andrew Jones <drjones(a)redhat.com> + Maxim Levitsky <mlevitsk(a)redhat.com> + Xiaoyao Li <xiaoyao.li(a)intel.com> + David Matlack <dmatlack(a)google.com> + Marc Orr <marcorr(a)google.com> + Isaku Yamahata <isaku.yamahata(a)gmail.com> + Maciej S. Szmigiero <maciej.szmigiero(a)oracle.com> Links to earlier patch series + RFC v1: https://lore.kernel.org/lkml/20210726183816.1343022-1-erdemaktas@google.com… + RFC v2: https://lore.kernel.org/lkml/20220830222000.709028-1-sagis@google.com/T/#u + RFC v3: https://lore.kernel.org/lkml/20230121001542.2472357-1-ackerleytng@google.co… + RFC v4: https://lore.kernel.org/lkml/20230725220132.2310657-1-afranji@google.com/ *** BLURB HERE *** Ackerley Tng (12): KVM: selftests: Add function to allow one-to-one GVA to GPA mappings KVM: selftests: Expose function that sets up sregs based on VM's mode KVM: selftests: Store initial stack address in struct kvm_vcpu KVM: selftests: Refactor steps in vCPU descriptor table initialization KVM: selftests: TDX: Use KVM_TDX_CAPABILITIES to validate TDs' attribute configuration KVM: selftests: TDX: Update load_td_memory_region for VM memory backed by guest memfd KVM: selftests: Add functions to allow mapping as shared KVM: selftests: Expose _vm_vaddr_alloc KVM: selftests: TDX: Add support for TDG.MEM.PAGE.ACCEPT KVM: selftests: TDX: Add support for TDG.VP.VEINFO.GET KVM: selftests: TDX: Add TDX UPM selftest KVM: selftests: TDX: Add TDX UPM selftests for implicit conversion Erdem Aktas (3): KVM: selftests: Add helper functions to create TDX VMs KVM: selftests: TDX: Add TDX lifecycle test KVM: selftests: TDX: Adding test case for TDX port IO Roger Wang (1): KVM: selftests: TDX: Add TDG.VP.INFO test Ryan Afranji (2): KVM: selftests: TDX: Verify the behavior when host consumes a TD private memory KVM: selftests: TDX: Add shared memory test Sagi Shahar (11): KVM: selftests: TDX: Add report_fatal_error test KVM: selftests: TDX: Add basic TDX CPUID test KVM: selftests: TDX: Add basic get_td_vmcall_info test KVM: selftests: TDX: Add TDX IO writes test KVM: selftests: TDX: Add TDX IO reads test KVM: selftests: TDX: Add TDX MSR read/write tests KVM: selftests: TDX: Add TDX HLT exit test KVM: selftests: TDX: Add TDX MMIO reads test KVM: selftests: TDX: Add TDX MMIO writes test KVM: selftests: TDX: Add TDX CPUID TDVMCALL test KVM: selftests: Propagate KVM_EXIT_MEMORY_FAULT to userspace tools/testing/selftests/kvm/Makefile | 8 + .../selftests/kvm/include/kvm_util_base.h | 30 + .../selftests/kvm/include/x86_64/processor.h | 4 + .../kvm/include/x86_64/tdx/td_boot.h | 82 + .../kvm/include/x86_64/tdx/td_boot_asm.h | 16 + .../selftests/kvm/include/x86_64/tdx/tdcall.h | 59 + .../selftests/kvm/include/x86_64/tdx/tdx.h | 65 + .../kvm/include/x86_64/tdx/tdx_util.h | 19 + .../kvm/include/x86_64/tdx/test_util.h | 164 ++ tools/testing/selftests/kvm/lib/kvm_util.c | 101 +- .../selftests/kvm/lib/x86_64/processor.c | 77 +- .../selftests/kvm/lib/x86_64/tdx/td_boot.S | 101 ++ .../selftests/kvm/lib/x86_64/tdx/tdcall.S | 158 ++ .../selftests/kvm/lib/x86_64/tdx/tdx.c | 262 ++++ .../selftests/kvm/lib/x86_64/tdx/tdx_util.c | 558 +++++++ .../selftests/kvm/lib/x86_64/tdx/test_util.c | 101 ++ .../kvm/x86_64/tdx_shared_mem_test.c | 135 ++ .../selftests/kvm/x86_64/tdx_upm_test.c | 469 ++++++ .../selftests/kvm/x86_64/tdx_vm_tests.c | 1319 +++++++++++++++++ 19 files changed, 3693 insertions(+), 35 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/td_boot.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/td_boot_asm.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdcall.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdx.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/tdx_util.h create mode 100644 tools/testing/selftests/kvm/include/x86_64/tdx/test_util.h create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/td_boot.S create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdcall.S create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdx.c create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/tdx_util.c create mode 100644 tools/testing/selftests/kvm/lib/x86_64/tdx/test_util.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_shared_mem_test.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_upm_test.c create mode 100644 tools/testing/selftests/kvm/x86_64/tdx_vm_tests.c -- 2.43.0.472.g3155946c3a-goog

8 months, 4 weeks

10
105
0 0

[RFC] ktap_v2: KTAP specification transition method

by Frank Rowand

In the middle of the thread about a patch to add the skip test result, I suggested documenting the process of deprecating the KTAP v1 Specification method of marking a skipped test: https://lore.kernel.org/all/490271eb-1429-2217-6e38-837c6e5e328b@gmail.com/… In a reply to that email I suggested that we ought to have a process to transition the KTAP Specification from v1 to v2, and possibly v3 and future. This email is meant to be the root of that discussion. My initial thinking is that there are at least three different types of project and/or community that may have different needs in this area. Type 1 - project controls both the test output generation and the test output parsing tool. Both generation and parsing code are in the same repository and/or synchronized versions are distributed together. Devicetree unittests are an example of Type 1. I plan to maintain changes of test output to KTAP v2 format in coordination with updating the parser to process KTAP v2 data. Type 2 - project controls both the test output generation and the test output parsing tool. The test output generation and a parser modifications may be controlled by the project BUT there are one or more external testing projects that (1) may have their own parsers, and (2) may have a single framework that tests multiple versions of the tests. I think that kselftest and kunit tests are probably examples of Type 2. I also think that DT unittests will become a Type 2 project as a result of converting to KTAP v2 data. Type 3 - project may create and maintain some tests, but is primarily a consumer of tests created by other projects. Type 3 projects typically have a single framework that is able to execute and process multiple versions of the tests. The Fuego test project is an example of Type 3. Maybe adding all of this complexity of different Types in my initial thinking was silly -- maybe everything in this topic is governed by the more complex Type 3. My thinking was that the three different Types of project would be impacted in different ways by transition plans. Type 3 would be the most impacted, so I wanted to be sure that any transition plan especially considered their needs. There is an important aspect of the KTAP format that might ease the transition from one version to another: All KTAP formatted results begin with a "version line", so as soon as a parser has processed the first line of a test, it can apply the appropriate KTAP Specification version to all subsequent lines of test output. A parser implementation could choose to process all versions, could choose to invoke a version specific parser, or some other approach all together. In the "add skip test results" thread, I suggested deprecating the v1 method of marking a skipped test in v2, with a scheduled removal of the v1 method in v3. But since the KTAP format version is available in the very first line of test output, is it necessary to do a slow deprecation and removal over two versions? One argument to doing a two version deprecation/removal process is that a parser that is one version older the the test output _might_ be able to process the test output without error, but would not be able to take advantage of features added in the newer version of the Specification. My opinion is that a two version deprecation/removal process will slow the Specification update process and lead to more versions of the Specification over a given time interval. A one version deprecation/removal process puts more of a burden on Type 3 projects and external parsers for Type 2 projects to implement parsers that can process the newer Specification more quickly and puts a burden on test maintainers to delay a move to the newer Specification, or possibly pressure to support selection of more than one Specification version format for output data. One additional item... On the KTAP Specification version 2 process wiki page, I suggested that it is "desirable for test result parsers that understand the KTAP Specification version 2 data also be able to parse version 1 data." With the implication "Converting version 1 compliant data to version 2 compliant data should not require a "flag day" switch of test result parsers." If this thread discussion results in a different decision, I will update the wiki. Thoughts? -Frank

9 months, 2 weeks

3
2
0 0

[PATCH v4 00/10] Add support for synchronous signals on perf events

by Marco Elver

The perf subsystem today unifies various tracing and monitoring features, from both software and hardware. One benefit of the perf subsystem is automatically inheriting events to child tasks, which enables process-wide events monitoring with low overheads. By default perf events are non-intrusive, not affecting behaviour of the tasks being monitored. For certain use-cases, however, it makes sense to leverage the generality of the perf events subsystem and optionally allow the tasks being monitored to receive signals on events they are interested in. This patch series adds the option to synchronously signal user space on events. To better support process-wide synchronous self-monitoring, without events propagating to children that do not share the current process's shared environment, two pre-requisite patches are added to optionally restrict inheritance to CLONE_THREAD, and remove events on exec (without affecting the parent). Examples how to use these features can be found in the tests added at the end of the series. In addition to the tests added, the series has also been subjected to syzkaller fuzzing (focus on 'kernel/events/' coverage). Motivation and Example Uses --------------------------- 1. Our immediate motivation is low-overhead sampling-based race detection for user space [1]. By using perf_event_open() at process initialization, we can create hardware breakpoint/watchpoint events that are propagated automatically to all threads in a process. As far as we are aware, today no existing kernel facility (such as ptrace) allows us to set up process-wide watchpoints with minimal overheads (that are comparable to mprotect() of whole pages). 2. Other low-overhead error detectors that rely on detecting accesses to certain memory locations or code, process-wide and also only in a specific set of subtasks or threads. [1] https://llvm.org/devmtg/2020-09/slides/Morehouse-GWP-Tsan.pdf Other ideas for use-cases we found interesting, but should only illustrate the range of potential to further motivate the utility (we're sure there are more): 3. Code hot patching without full stop-the-world. Specifically, by setting a code breakpoint to entry to the patched routine, then send signals to threads and check that they are not in the routine, but without stopping them further. If any of the threads will enter the routine, it will receive SIGTRAP and pause. 4. Safepoints without mprotect(). Some Java implementations use "load from a known memory location" as a safepoint. When threads need to be stopped, the page containing the location is mprotect()ed and threads get a signal. This could be replaced with a watchpoint, which does not require a whole page nor DTLB shootdowns. 5. Threads receiving signals on performance events to throttle/unthrottle themselves. 6. Tracking data flow globally. Changelog --------- v4: * Fix for parent and child racing to exit in sync_child_event(). * Fix race between irq_work running and task's sighand being released by release_task(). * Generalize setting si_perf and si_addr independent of event type; introduces perf_event_attr::sig_data, which can be set by user space to be propagated to si_perf. * Warning in perf_sigtrap() if ctx->task and current mismatch; we expect this on architectures that do not properly implement arch_irq_work_raise(). * Require events that want sigtrap to be associated with a task. * Dropped "perf: Add breakpoint information to siginfo on SIGTRAP" in favor of more generic solution (perf_event_attr::sig_data). v3: * Add patch "perf: Rework perf_event_exit_event()" to beginning of series, courtesy of Peter Zijlstra. * Rework "perf: Add support for event removal on exec" based on the added "perf: Rework perf_event_exit_event()". * Fix kselftests to work with more recent libc, due to the way it forces using the kernel's own siginfo_t. * Add basic perf-tool built-in test. v2/RFC: https://lkml.kernel.org/r/20210310104139.679618-1-elver@google.com * Patch "Support only inheriting events if cloned with CLONE_THREAD" added to series. * Patch "Add support for event removal on exec" added to series. * Patch "Add kselftest for process-wide sigtrap handling" added to series. * Patch "Add kselftest for remove_on_exec" added to series. * Implicitly restrict inheriting events if sigtrap, but the child was cloned with CLONE_CLEAR_SIGHAND, because it is not generally safe if the child cleared all signal handlers to continue sending SIGTRAP. * Various minor fixes (see details in patches). v1/RFC: https://lkml.kernel.org/r/20210223143426.2412737-1-elver@google.com Pre-series: The discussion at [2] led to the changes in this series. The approach taken in "Add support for SIGTRAP on perf events" to trigger the signal was suggested by Peter Zijlstra in [3]. [2] https://lore.kernel.org/lkml/CACT4Y+YPrXGw+AtESxAgPyZ84TYkNZdP0xpocX2jwVAbZ… [3] https://lore.kernel.org/lkml/YBv3rAT566k+6zjg@hirez.programming.kicks-ass.n… Marco Elver (9): perf: Apply PERF_EVENT_IOC_MODIFY_ATTRIBUTES to children perf: Support only inheriting events if cloned with CLONE_THREAD perf: Add support for event removal on exec signal: Introduce TRAP_PERF si_code and si_perf to siginfo perf: Add support for SIGTRAP on perf events selftests/perf_events: Add kselftest for process-wide sigtrap handling selftests/perf_events: Add kselftest for remove_on_exec tools headers uapi: Sync tools/include/uapi/linux/perf_event.h perf test: Add basic stress test for sigtrap handling Peter Zijlstra (1): perf: Rework perf_event_exit_event() arch/m68k/kernel/signal.c | 3 + arch/x86/kernel/signal_compat.c | 5 +- fs/signalfd.c | 4 + include/linux/compat.h | 2 + include/linux/perf_event.h | 9 +- include/linux/signal.h | 1 + include/uapi/asm-generic/siginfo.h | 6 +- include/uapi/linux/perf_event.h | 12 +- include/uapi/linux/signalfd.h | 4 +- kernel/events/core.c | 302 +++++++++++++----- kernel/fork.c | 2 +- kernel/signal.c | 11 + tools/include/uapi/linux/perf_event.h | 12 +- tools/perf/tests/Build | 1 + tools/perf/tests/builtin-test.c | 5 + tools/perf/tests/sigtrap.c | 150 +++++++++ tools/perf/tests/tests.h | 1 + .../testing/selftests/perf_events/.gitignore | 3 + tools/testing/selftests/perf_events/Makefile | 6 + tools/testing/selftests/perf_events/config | 1 + .../selftests/perf_events/remove_on_exec.c | 260 +++++++++++++++ tools/testing/selftests/perf_events/settings | 1 + .../selftests/perf_events/sigtrap_threads.c | 210 ++++++++++++ 23 files changed, 924 insertions(+), 87 deletions(-) create mode 100644 tools/perf/tests/sigtrap.c create mode 100644 tools/testing/selftests/perf_events/.gitignore create mode 100644 tools/testing/selftests/perf_events/Makefile create mode 100644 tools/testing/selftests/perf_events/config create mode 100644 tools/testing/selftests/perf_events/remove_on_exec.c create mode 100644 tools/testing/selftests/perf_events/settings create mode 100644 tools/testing/selftests/perf_events/sigtrap_threads.c -- 2.31.0.208.g409f899ff0-goog

10 months, 2 weeks

5
29
0 0

[PATCH] tools/testing/selftests/x86: add dlclose function in the vdso_restorer.c

by liujing

in the main function of vdso_restorer.c,there is a dlopen function, but there is no dlclose function to close the file Signed-off-by: liujing <liujing(a)cmss.chinamobile.com> --- tools/testing/selftests/x86/vdso_restorer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/x86/vdso_restorer.c b/tools/testing/selftests/x86/vdso_restorer.c index fe99f2434155..a0b1155dee31 100644 --- a/tools/testing/selftests/x86/vdso_restorer.c +++ b/tools/testing/selftests/x86/vdso_restorer.c @@ -57,6 +57,8 @@ int main() return 0; } + dlclose(vdso); + memset(&sa, 0, sizeof(sa)); sa.handler = handler_with_siginfo; sa.flags = SA_SIGINFO; -- 2.18.2

10 months, 3 weeks

2
1
0 0

selftests: clone3: clone3_cap_checkpoint_restore fails - Could not set CAP_CHECKPOINT_RESTORE

by Naresh Kamboju

selftests clone3 cap_checkpoint_restore fails on all devices. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> [ 97.198602] audit: type=1701 audit(1651167820.383:12): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=1732 comm=\"clone3_cap_chec\" exe=\"/opt/kselftests/default-in-kernel/clone3/clone3_cap_checkpoint_restore\" sig=6 res=1 # selftests: clone3: clone3_cap_checkpoint_restore # TAP version 13 # 1..1 # # Starting 1 tests from 1 test cases. # # RUN global.clone3_cap_checkpoint_restore ... # # clone3_cap_checkpoint_restore.c:155:clone3_cap_checkpoint_restore:Child has PID 1733 # # clone3() syscall supported # cap_set_proc: Operation not permitted # # clone3_cap_checkpoint_restore.c:164:clone3_cap_checkpoint_restore:Expected set_capability() (-1) == 0 (0) # # clone3_cap_checkpoint_restore.c:165:clone3_cap_checkpoint_restore:Could not set CAP_CHECKPOINT_RESTORE # # clone3_cap_checkpoint_restore: Test terminated by assertion # # FAIL global.clone3_cap_checkpoint_restore # not ok 1 global.clone3_cap_checkpoint_restore # # FAILED: 0 / 1 tests passed. # # Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0 not ok 4 selftests: clone3: clone3_cap_checkpoint_restore # exit=1 Test details links, https://lkft.validation.linaro.org/scheduler/job/5812724#L2074 Test results comparison link, https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20221107/te… https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20221107/te… https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20221107/te… metadata: git_ref: master git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git_sha: d8e87774068af213ab5b058b1b114dc397b577aa git_describe: next-20221107 kernel_version: 6.1.0-rc3 kernel-config: https://builds.tuxbuild.com/2HChVOSNxUpvfAfLTnaK7zyTdUi/config build-url: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next/-/pipelines/687092361 artifact-location: https://builds.tuxbuild.com/2HChVOSNxUpvfAfLTnaK7zyTdUi toolchain: gcc-11 -- Linaro LKFT https://lkft.linaro.org

11 months

3
3
0 0

[syzbot] WARNING in btrfs_free_reserved_data_space_noquota

by syzbot

Hello, syzbot found the following issue on: HEAD commit: b7b275e60bcd Linux 6.1-rc7 git tree: upstream console+strace: https://syzkaller.appspot.com/x/log.txt?x=158a7b73880000 kernel config: https://syzkaller.appspot.com/x/.config?x=2325e409a9a893e1 dashboard link: https://syzkaller.appspot.com/bug?extid=adec8406ad17413d4c06 compiler: Debian clang version 13.0.1-++20220126092033+75e33f71c2da-1~exp1~20220126212112.63, GNU ld (GNU Binutils for Debian) 2.35.2 syz repro: https://syzkaller.appspot.com/x/repro.syz?x=169ccb75880000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=17bf7153880000 Downloadable assets: disk image: https://storage.googleapis.com/syzbot-assets/525233126d34/disk-b7b275e6.raw… vmlinux: https://storage.googleapis.com/syzbot-assets/e8299bf41400/vmlinux-b7b275e6.… kernel image: https://storage.googleapis.com/syzbot-assets/eebf691dbf6f/bzImage-b7b275e6.… mounted in repro: https://storage.googleapis.com/syzbot-assets/5423c2d2ad62/mount_0.gz The issue was bisected to: commit c814bf958926ff45a9c1e899bd001006ab6cfbae Author: ye xingchen <ye.xingchen(a)zte.com.cn> Date: Tue Aug 16 10:51:06 2022 +0000 powerpc/selftests: Use timersub() for gettimeofday() bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=118c3d03880000 final oops: https://syzkaller.appspot.com/x/report.txt?x=138c3d03880000 console output: https://syzkaller.appspot.com/x/log.txt?x=158c3d03880000 IMPORTANT: if you fix the issue, please add the following tag to the commit: Reported-by: syzbot+adec8406ad17413d4c06(a)syzkaller.appspotmail.com Fixes: c814bf958926 ("powerpc/selftests: Use timersub() for gettimeofday()") RDX: 0000000000000001 RSI: 0000000020000280 RDI: 0000000000000005 RBP: 00007ffd32e91c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000008000000 R11: 0000000000000246 R12: 0000000000000006 R13: 00007ffd32e91cb0 R14: 00007ffd32e91c90 R15: 0000000000000006 </TASK> ------------[ cut here ]------------ WARNING: CPU: 1 PID: 3764 at fs/btrfs/space-info.h:122 btrfs_space_info_free_bytes_may_use fs/btrfs/space-info.h:154 [inline] WARNING: CPU: 1 PID: 3764 at fs/btrfs/space-info.h:122 btrfs_free_reserved_data_space_noquota+0x219/0x2b0 fs/btrfs/delalloc-space.c:179 Modules linked in: CPU: 1 PID: 3764 Comm: syz-executor759 Not tainted 6.1.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:btrfs_space_info_update_bytes_may_use fs/btrfs/space-info.h:122 [inline] RIP: 0010:btrfs_space_info_free_bytes_may_use fs/btrfs/space-info.h:154 [inline] RIP: 0010:btrfs_free_reserved_data_space_noquota+0x219/0x2b0 fs/btrfs/delalloc-space.c:179 Code: 2f 00 74 08 4c 89 ef e8 b5 98 32 fe 49 8b 5d 00 48 89 df 4c 8b 74 24 08 4c 89 f6 e8 21 81 de fd 4c 39 f3 73 16 e8 d7 7e de fd <0f> 0b 31 db 4c 8b 34 24 41 80 3c 2f 00 75 8c eb 92 e8 c1 7e de fd RSP: 0018:ffffc9000443f410 EFLAGS: 00010293 RAX: ffffffff83ac1919 RBX: 00000000005cb000 RCX: ffff888027989d40 RDX: 0000000000000000 RSI: 0000000000800000 RDI: 00000000005cb000 RBP: dffffc0000000000 R08: ffffffff83ac190f R09: fffffbfff1cebe0e R10: fffffbfff1cebe0e R11: 1ffffffff1cebe0d R12: ffff8880774f3800 R13: ffff8880774f3860 R14: 0000000000800000 R15: 1ffff1100ee9e70c FS: 0000555555aaa300(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0d98f20140 CR3: 0000000025ccf000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_free_reserved_data_space+0x9d/0xd0 fs/btrfs/delalloc-space.c:199 btrfs_dio_iomap_begin+0x8f7/0x1070 fs/btrfs/inode.c:7762 iomap_iter+0x606/0x8a0 fs/iomap/iter.c:74 __iomap_dio_rw+0xd91/0x20d0 fs/iomap/direct-io.c:601 btrfs_dio_write+0x9c/0xe0 fs/btrfs/inode.c:8094 btrfs_direct_write fs/btrfs/file.c:1835 [inline] btrfs_do_write_iter+0x871/0x1260 fs/btrfs/file.c:1980 do_iter_write+0x6c2/0xc20 fs/read_write.c:861 vfs_writev fs/read_write.c:934 [inline] do_pwritev+0x200/0x350 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f0d98ea8ea9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd32e91c38 EFLAGS: 00000246 ORIG_RAX: 0000000000000148 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f0d98ea8ea9 RDX: 0000000000000001 RSI: 0000000020000280 RDI: 0000000000000005 RBP: 00007ffd32e91c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000008000000 R11: 0000000000000246 R12: 0000000000000006 R13: 00007ffd32e91cb0 R14: 00007ffd32e91c90 R15: 0000000000000006 </TASK> --- This report is generated by a bot. It may contain errors. See https://goo.gl/tpsmEJ for more information about syzbot. syzbot engineers can be reached at syzkaller(a)googlegroups.com. syzbot will keep track of this issue. See: https://goo.gl/tpsmEJ#status for how to communicate with syzbot. For information about bisection process see: https://goo.gl/tpsmEJ#bisection syzbot can test patches for this issue, for details see: https://goo.gl/tpsmEJ#testing-patches

11 months, 1 week

3
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror December 2023