June 2022 - Linux-kselftest-mirror

[PATCH v3] lib: Convert test_user_copy to KUnit test

by Vitor Massaru Iha

This adds the conversion of the runtime tests of test_user_copy fuctions, from `lib/test_user_copy.c`to KUnit tests. Signed-off-by: Vitor Massaru Iha <vitor(a)massaru.org> --- v2: * splitted patch in 3: - Allows to install and load modules in root filesystem; - Provides an userspace memory context when tests are compiled as module; - Convert test_user_copy to KUnit test; * removed entry for CONFIG_TEST_USER_COPY; * replaced pr_warn to KUNIT_EXPECT_FALSE_MSG in test macro to decrease the diff; v3: * rebased with last kunit branch * Please apply this commit from kunit-fixes: 3f37d14b8a3152441f36b6bc74000996679f0998 And these from patchwork: https://patchwork.kernel.org/patch/11676331/ https://patchwork.kernel.org/patch/11676335/ --- lib/Kconfig.debug | 28 ++++++++------ lib/Makefile | 2 +- lib/{test_user_copy.c => user_copy_kunit.c} | 42 +++++++++------------ 3 files changed, 35 insertions(+), 37 deletions(-) rename lib/{test_user_copy.c => user_copy_kunit.c} (91%) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 9ad9210d70a1..f699a3624ae7 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2078,18 +2078,6 @@ config TEST_VMALLOC If unsure, say N. -config TEST_USER_COPY - tristate "Test user/kernel boundary protections" - depends on m - help - This builds the "test_user_copy" module that runs sanity checks - on the copy_to/from_user infrastructure, making sure basic - user/kernel boundary testing is working. If it fails to load, - a regression has been detected in the user/kernel memory boundary - protections. - - If unsure, say N. - config TEST_BPF tristate "Test BPF filter functionality" depends on m && NET @@ -2154,6 +2142,22 @@ config SYSCTL_KUNIT_TEST If unsure, say N. +config USER_COPY_KUNIT + tristate "KUnit Test for user/kernel boundary protections" + depends on KUNIT + depends on m + help + This builds the "user_copy_kunit" module that runs sanity checks + on the copy_to/from_user infrastructure, making sure basic + user/kernel boundary testing is working. If it fails to load, + a regression has been detected in the user/kernel memory boundary + protections. + + For more information on KUnit and unit tests in general please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. + config LIST_KUNIT_TEST tristate "KUnit Test for Kernel Linked-list structures" if !KUNIT_ALL_TESTS depends on KUNIT diff --git a/lib/Makefile b/lib/Makefile index b1c42c10073b..8c145f85accc 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -78,7 +78,6 @@ obj-$(CONFIG_TEST_VMALLOC) += test_vmalloc.o obj-$(CONFIG_TEST_OVERFLOW) += test_overflow.o obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o obj-$(CONFIG_TEST_SORT) += test_sort.o -obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o obj-$(CONFIG_TEST_PRINTF) += test_printf.o @@ -318,3 +317,4 @@ obj-$(CONFIG_OBJAGG) += objagg.o # KUnit tests obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o +obj-$(CONFIG_USER_COPY_KUNIT) += user_copy_kunit.o diff --git a/lib/test_user_copy.c b/lib/user_copy_kunit.c similarity index 91% rename from lib/test_user_copy.c rename to lib/user_copy_kunit.c index 5ff04d8fe971..a10ddd15b4cd 100644 --- a/lib/test_user_copy.c +++ b/lib/user_copy_kunit.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/uaccess.h> #include <linux/vmalloc.h> +#include <kunit/test.h> /* * Several 32-bit architectures support 64-bit {get,put}_user() calls. @@ -35,7 +36,7 @@ ({ \ int cond = (condition); \ if (cond) \ - pr_warn("[%d] " msg "\n", __LINE__, ##__VA_ARGS__); \ + KUNIT_EXPECT_FALSE_MSG(test, cond, msg, ##__VA_ARGS__); \ cond; \ }) @@ -44,7 +45,7 @@ static bool is_zeroed(void *from, size_t size) return memchr_inv(from, 0x0, size) == NULL; } -static int test_check_nonzero_user(char *kmem, char __user *umem, size_t size) +static int test_check_nonzero_user(struct kunit *test, char *kmem, char __user *umem, size_t size) { int ret = 0; size_t start, end, i, zero_start, zero_end; @@ -102,7 +103,7 @@ static int test_check_nonzero_user(char *kmem, char __user *umem, size_t size) return ret; } -static int test_copy_struct_from_user(char *kmem, char __user *umem, +static int test_copy_struct_from_user(struct kunit *test, char *kmem, char __user *umem, size_t size) { int ret = 0; @@ -177,7 +178,7 @@ static int test_copy_struct_from_user(char *kmem, char __user *umem, return ret; } -static int __init test_user_copy_init(void) +static void user_copy_test(struct kunit *test) { int ret = 0; char *kmem; @@ -192,16 +193,14 @@ static int __init test_user_copy_init(void) #endif kmem = kmalloc(PAGE_SIZE * 2, GFP_KERNEL); - if (!kmem) - return -ENOMEM; + KUNIT_EXPECT_FALSE_MSG(test, kmem == NULL, "kmalloc failed"); user_addr = vm_mmap(NULL, 0, PAGE_SIZE * 2, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_ANONYMOUS | MAP_PRIVATE, 0); if (user_addr >= (unsigned long)(TASK_SIZE)) { - pr_warn("Failed to allocate user memory\n"); kfree(kmem); - return -ENOMEM; + KUNIT_FAIL(test, "Failed to allocate user memory"); } usermem = (char __user *)user_addr; @@ -245,9 +244,9 @@ static int __init test_user_copy_init(void) #undef test_legit /* Test usage of check_nonzero_user(). */ - ret |= test_check_nonzero_user(kmem, usermem, 2 * PAGE_SIZE); + ret |= test_check_nonzero_user(test, kmem, usermem, 2 * PAGE_SIZE); /* Test usage of copy_struct_from_user(). */ - ret |= test_copy_struct_from_user(kmem, usermem, 2 * PAGE_SIZE); + ret |= test_copy_struct_from_user(test, kmem, usermem, 2 * PAGE_SIZE); /* * Invalid usage: none of these copies should succeed. @@ -309,23 +308,18 @@ static int __init test_user_copy_init(void) vm_munmap(user_addr, PAGE_SIZE * 2); kfree(kmem); - - if (ret == 0) { - pr_info("tests passed.\n"); - return 0; - } - - return -EINVAL; } -module_init(test_user_copy_init); - -static void __exit test_user_copy_exit(void) -{ - pr_info("unloaded.\n"); -} +static struct kunit_case user_copy_test_cases[] = { + KUNIT_CASE(user_copy_test), + {} +}; -module_exit(test_user_copy_exit); +static struct kunit_suite user_copy_test_suite = { + .name = "user_copy", + .test_cases = user_copy_test_cases, +}; +kunit_test_suites(&user_copy_test_suite); MODULE_AUTHOR("Kees Cook <keescook(a)chromium.org>"); MODULE_LICENSE("GPL"); base-commit: d43c7fb05765152d4d4a39a8ef957c4ea14d8847 -- 2.26.2

2 months, 1 week

4
11
0 0

[PATCH v4 00/10] Add support for synchronous signals on perf events

by Marco Elver

The perf subsystem today unifies various tracing and monitoring features, from both software and hardware. One benefit of the perf subsystem is automatically inheriting events to child tasks, which enables process-wide events monitoring with low overheads. By default perf events are non-intrusive, not affecting behaviour of the tasks being monitored. For certain use-cases, however, it makes sense to leverage the generality of the perf events subsystem and optionally allow the tasks being monitored to receive signals on events they are interested in. This patch series adds the option to synchronously signal user space on events. To better support process-wide synchronous self-monitoring, without events propagating to children that do not share the current process's shared environment, two pre-requisite patches are added to optionally restrict inheritance to CLONE_THREAD, and remove events on exec (without affecting the parent). Examples how to use these features can be found in the tests added at the end of the series. In addition to the tests added, the series has also been subjected to syzkaller fuzzing (focus on 'kernel/events/' coverage). Motivation and Example Uses --------------------------- 1. Our immediate motivation is low-overhead sampling-based race detection for user space [1]. By using perf_event_open() at process initialization, we can create hardware breakpoint/watchpoint events that are propagated automatically to all threads in a process. As far as we are aware, today no existing kernel facility (such as ptrace) allows us to set up process-wide watchpoints with minimal overheads (that are comparable to mprotect() of whole pages). 2. Other low-overhead error detectors that rely on detecting accesses to certain memory locations or code, process-wide and also only in a specific set of subtasks or threads. [1] https://llvm.org/devmtg/2020-09/slides/Morehouse-GWP-Tsan.pdf Other ideas for use-cases we found interesting, but should only illustrate the range of potential to further motivate the utility (we're sure there are more): 3. Code hot patching without full stop-the-world. Specifically, by setting a code breakpoint to entry to the patched routine, then send signals to threads and check that they are not in the routine, but without stopping them further. If any of the threads will enter the routine, it will receive SIGTRAP and pause. 4. Safepoints without mprotect(). Some Java implementations use "load from a known memory location" as a safepoint. When threads need to be stopped, the page containing the location is mprotect()ed and threads get a signal. This could be replaced with a watchpoint, which does not require a whole page nor DTLB shootdowns. 5. Threads receiving signals on performance events to throttle/unthrottle themselves. 6. Tracking data flow globally. Changelog --------- v4: * Fix for parent and child racing to exit in sync_child_event(). * Fix race between irq_work running and task's sighand being released by release_task(). * Generalize setting si_perf and si_addr independent of event type; introduces perf_event_attr::sig_data, which can be set by user space to be propagated to si_perf. * Warning in perf_sigtrap() if ctx->task and current mismatch; we expect this on architectures that do not properly implement arch_irq_work_raise(). * Require events that want sigtrap to be associated with a task. * Dropped "perf: Add breakpoint information to siginfo on SIGTRAP" in favor of more generic solution (perf_event_attr::sig_data). v3: * Add patch "perf: Rework perf_event_exit_event()" to beginning of series, courtesy of Peter Zijlstra. * Rework "perf: Add support for event removal on exec" based on the added "perf: Rework perf_event_exit_event()". * Fix kselftests to work with more recent libc, due to the way it forces using the kernel's own siginfo_t. * Add basic perf-tool built-in test. v2/RFC: https://lkml.kernel.org/r/20210310104139.679618-1-elver@google.com * Patch "Support only inheriting events if cloned with CLONE_THREAD" added to series. * Patch "Add support for event removal on exec" added to series. * Patch "Add kselftest for process-wide sigtrap handling" added to series. * Patch "Add kselftest for remove_on_exec" added to series. * Implicitly restrict inheriting events if sigtrap, but the child was cloned with CLONE_CLEAR_SIGHAND, because it is not generally safe if the child cleared all signal handlers to continue sending SIGTRAP. * Various minor fixes (see details in patches). v1/RFC: https://lkml.kernel.org/r/20210223143426.2412737-1-elver@google.com Pre-series: The discussion at [2] led to the changes in this series. The approach taken in "Add support for SIGTRAP on perf events" to trigger the signal was suggested by Peter Zijlstra in [3]. [2] https://lore.kernel.org/lkml/CACT4Y+YPrXGw+AtESxAgPyZ84TYkNZdP0xpocX2jwVAbZ… [3] https://lore.kernel.org/lkml/YBv3rAT566k+6zjg@hirez.programming.kicks-ass.n… Marco Elver (9): perf: Apply PERF_EVENT_IOC_MODIFY_ATTRIBUTES to children perf: Support only inheriting events if cloned with CLONE_THREAD perf: Add support for event removal on exec signal: Introduce TRAP_PERF si_code and si_perf to siginfo perf: Add support for SIGTRAP on perf events selftests/perf_events: Add kselftest for process-wide sigtrap handling selftests/perf_events: Add kselftest for remove_on_exec tools headers uapi: Sync tools/include/uapi/linux/perf_event.h perf test: Add basic stress test for sigtrap handling Peter Zijlstra (1): perf: Rework perf_event_exit_event() arch/m68k/kernel/signal.c | 3 + arch/x86/kernel/signal_compat.c | 5 +- fs/signalfd.c | 4 + include/linux/compat.h | 2 + include/linux/perf_event.h | 9 +- include/linux/signal.h | 1 + include/uapi/asm-generic/siginfo.h | 6 +- include/uapi/linux/perf_event.h | 12 +- include/uapi/linux/signalfd.h | 4 +- kernel/events/core.c | 302 +++++++++++++----- kernel/fork.c | 2 +- kernel/signal.c | 11 + tools/include/uapi/linux/perf_event.h | 12 +- tools/perf/tests/Build | 1 + tools/perf/tests/builtin-test.c | 5 + tools/perf/tests/sigtrap.c | 150 +++++++++ tools/perf/tests/tests.h | 1 + .../testing/selftests/perf_events/.gitignore | 3 + tools/testing/selftests/perf_events/Makefile | 6 + tools/testing/selftests/perf_events/config | 1 + .../selftests/perf_events/remove_on_exec.c | 260 +++++++++++++++ tools/testing/selftests/perf_events/settings | 1 + .../selftests/perf_events/sigtrap_threads.c | 210 ++++++++++++ 23 files changed, 924 insertions(+), 87 deletions(-) create mode 100644 tools/perf/tests/sigtrap.c create mode 100644 tools/testing/selftests/perf_events/.gitignore create mode 100644 tools/testing/selftests/perf_events/Makefile create mode 100644 tools/testing/selftests/perf_events/config create mode 100644 tools/testing/selftests/perf_events/remove_on_exec.c create mode 100644 tools/testing/selftests/perf_events/settings create mode 100644 tools/testing/selftests/perf_events/sigtrap_threads.c -- 2.31.0.208.g409f899ff0-goog

4 months, 1 week

5
29
0 0

[PATCH v6] lib: add basic KUnit test for lib/math

by Daniel Latypov

Add basic test coverage for files that don't require any config options: * part of math.h (what seem to be the most commonly used macros) * gcd.c * lcm.c * int_sqrt.c * reciprocal_div.c (Ignored int_pow.c since it's a simple textbook algorithm.) These tests aren't particularly interesting, but they * provide short and simple examples of parameterized tests * provide a place to add tests for any new files in this dir * are written so adding new test cases to cover edge cases should be easy * looking at code coverage, we hit all the branches in the .c files Signed-off-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: David Gow <davidgow(a)google.com> --- Changes since v5: * add in test cases for roundup/rounddown * address misc comments from David Changes since v4: * add in test cases for some math.h macros (abs, round_up/round_down, div_round_down/closest) * use parameterized testing less to keep things terser Changes since v3: * fix `checkpatch.pl --strict` warnings * add test cases for gcd(0,0) and lcm(0,0) * minor: don't test both gcd(a,b) and gcd(b,a) when a == b Changes since v2: mv math_test.c => math_kunit.c Changes since v1: * Rebase and rewrite to use the new parameterized testing support. * misc: fix overflow in literal and inline int_sqrt format string. * related: commit 1f0e943df68a ("Documentation: kunit: provide guidance for testing many inputs") was merged explaining the patterns shown here. * there's an in-flight patch to update it for parameterized testing. --- lib/math/Kconfig | 12 ++ lib/math/Makefile | 2 + lib/math/math_kunit.c | 291 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 305 insertions(+) create mode 100644 lib/math/math_kunit.c diff --git a/lib/math/Kconfig b/lib/math/Kconfig index f19bc9734fa7..a974d4db0f9c 100644 --- a/lib/math/Kconfig +++ b/lib/math/Kconfig @@ -15,3 +15,15 @@ config PRIME_NUMBERS config RATIONAL bool + +config MATH_KUNIT_TEST + tristate "KUnit test for lib/math and math.h" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + This builds unit tests for lib/math and math.h. + + For more information on KUnit and unit tests in general, please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. diff --git a/lib/math/Makefile b/lib/math/Makefile index be6909e943bd..30abb7a8d564 100644 --- a/lib/math/Makefile +++ b/lib/math/Makefile @@ -4,3 +4,5 @@ obj-y += div64.o gcd.o lcm.o int_pow.o int_sqrt.o reciprocal_div.o obj-$(CONFIG_CORDIC) += cordic.o obj-$(CONFIG_PRIME_NUMBERS) += prime_numbers.o obj-$(CONFIG_RATIONAL) += rational.o + +obj-$(CONFIG_MATH_KUNIT_TEST) += math_kunit.o diff --git a/lib/math/math_kunit.c b/lib/math/math_kunit.c new file mode 100644 index 000000000000..556c23b17c3c --- /dev/null +++ b/lib/math/math_kunit.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Simple KUnit suite for math helper funcs that are always enabled. + * + * Copyright (C) 2020, Google LLC. + * Author: Daniel Latypov <dlatypov(a)google.com> + */ + +#include <kunit/test.h> +#include <linux/gcd.h> +#include <linux/kernel.h> +#include <linux/lcm.h> +#include <linux/reciprocal_div.h> + +static void abs_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, abs((char)0), (char)0); + KUNIT_EXPECT_EQ(test, abs((char)42), (char)42); + KUNIT_EXPECT_EQ(test, abs((char)-42), (char)42); + + /* The expression in the macro is actually promoted to an int. */ + KUNIT_EXPECT_EQ(test, abs((short)0), 0); + KUNIT_EXPECT_EQ(test, abs((short)42), 42); + KUNIT_EXPECT_EQ(test, abs((short)-42), 42); + + KUNIT_EXPECT_EQ(test, abs(0), 0); + KUNIT_EXPECT_EQ(test, abs(42), 42); + KUNIT_EXPECT_EQ(test, abs(-42), 42); + + KUNIT_EXPECT_EQ(test, abs(0L), 0L); + KUNIT_EXPECT_EQ(test, abs(42L), 42L); + KUNIT_EXPECT_EQ(test, abs(-42L), 42L); + + KUNIT_EXPECT_EQ(test, abs(0LL), 0LL); + KUNIT_EXPECT_EQ(test, abs(42LL), 42LL); + KUNIT_EXPECT_EQ(test, abs(-42LL), 42LL); + + /* Unsigned types get casted to signed. */ + KUNIT_EXPECT_EQ(test, abs(0ULL), 0LL); + KUNIT_EXPECT_EQ(test, abs(42ULL), 42LL); +} + +static void int_sqrt_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, int_sqrt(0UL), 0UL); + KUNIT_EXPECT_EQ(test, int_sqrt(1UL), 1UL); + KUNIT_EXPECT_EQ(test, int_sqrt(4UL), 2UL); + KUNIT_EXPECT_EQ(test, int_sqrt(5UL), 2UL); + KUNIT_EXPECT_EQ(test, int_sqrt(8UL), 2UL); + KUNIT_EXPECT_EQ(test, int_sqrt(1UL << 30), 1UL << 15); +} + +static void round_up_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, round_up(0, 1), 0); + KUNIT_EXPECT_EQ(test, round_up(1, 2), 2); + KUNIT_EXPECT_EQ(test, round_up(3, 2), 4); + KUNIT_EXPECT_EQ(test, round_up((1 << 30) - 1, 2), 1 << 30); + KUNIT_EXPECT_EQ(test, round_up((1 << 30) - 1, 1 << 29), 1 << 30); +} + +static void round_down_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, round_down(0, 1), 0); + KUNIT_EXPECT_EQ(test, round_down(1, 2), 0); + KUNIT_EXPECT_EQ(test, round_down(3, 2), 2); + KUNIT_EXPECT_EQ(test, round_down((1 << 30) - 1, 2), (1 << 30) - 2); + KUNIT_EXPECT_EQ(test, round_down((1 << 30) - 1, 1 << 29), 1 << 29); +} + +/* These versions can round to numbers that aren't a power of two */ +static void roundup_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, roundup(0, 1), 0); + KUNIT_EXPECT_EQ(test, roundup(1, 2), 2); + KUNIT_EXPECT_EQ(test, roundup(3, 2), 4); + KUNIT_EXPECT_EQ(test, roundup((1 << 30) - 1, 2), 1 << 30); + KUNIT_EXPECT_EQ(test, roundup((1 << 30) - 1, 1 << 29), 1 << 30); + + KUNIT_EXPECT_EQ(test, roundup(3, 2), 4); + KUNIT_EXPECT_EQ(test, roundup(4, 3), 6); +} + +static void rounddown_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, rounddown(0, 1), 0); + KUNIT_EXPECT_EQ(test, rounddown(1, 2), 0); + KUNIT_EXPECT_EQ(test, rounddown(3, 2), 2); + KUNIT_EXPECT_EQ(test, rounddown((1 << 30) - 1, 2), (1 << 30) - 2); + KUNIT_EXPECT_EQ(test, rounddown((1 << 30) - 1, 1 << 29), 1 << 29); + + KUNIT_EXPECT_EQ(test, rounddown(3, 2), 2); + KUNIT_EXPECT_EQ(test, rounddown(4, 3), 3); +} + +static void div_round_up_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(0, 1), 0); + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(20, 10), 2); + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(21, 10), 3); + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(21, 20), 2); + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(21, 99), 1); +} + +static void div_round_closest_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, DIV_ROUND_CLOSEST(0, 1), 0); + KUNIT_EXPECT_EQ(test, DIV_ROUND_CLOSEST(20, 10), 2); + KUNIT_EXPECT_EQ(test, DIV_ROUND_CLOSEST(21, 10), 2); + KUNIT_EXPECT_EQ(test, DIV_ROUND_CLOSEST(25, 10), 3); +} + +/* Generic test case for unsigned long inputs. */ +struct test_case { + unsigned long a, b; + unsigned long result; +}; + +static struct test_case gcd_cases[] = { + { + .a = 0, .b = 0, + .result = 0, + }, + { + .a = 0, .b = 1, + .result = 1, + }, + { + .a = 2, .b = 2, + .result = 2, + }, + { + .a = 2, .b = 4, + .result = 2, + }, + { + .a = 3, .b = 5, + .result = 1, + }, + { + .a = 3 * 9, .b = 3 * 5, + .result = 3, + }, + { + .a = 3 * 5 * 7, .b = 3 * 5 * 11, + .result = 15, + }, + { + .a = 1 << 21, + .b = (1 << 21) - 1, + .result = 1, + }, +}; + +KUNIT_ARRAY_PARAM(gcd, gcd_cases, NULL); + +static void gcd_test(struct kunit *test) +{ + const char *message_fmt = "gcd(%lu, %lu)"; + const struct test_case *test_param = test->param_value; + + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + gcd(test_param->a, test_param->b), + message_fmt, test_param->a, + test_param->b); + + if (test_param->a == test_param->b) + return; + + /* gcd(a,b) == gcd(b,a) */ + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + gcd(test_param->b, test_param->a), + message_fmt, test_param->b, + test_param->a); +} + +static struct test_case lcm_cases[] = { + { + .a = 0, .b = 0, + .result = 0, + }, + { + .a = 0, .b = 1, + .result = 0, + }, + { + .a = 1, .b = 2, + .result = 2, + }, + { + .a = 2, .b = 2, + .result = 2, + }, + { + .a = 3 * 5, .b = 3 * 7, + .result = 3 * 5 * 7, + }, +}; + +KUNIT_ARRAY_PARAM(lcm, lcm_cases, NULL); + +static void lcm_test(struct kunit *test) +{ + const char *message_fmt = "lcm(%lu, %lu)"; + const struct test_case *test_param = test->param_value; + + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + lcm(test_param->a, test_param->b), + message_fmt, test_param->a, + test_param->b); + + if (test_param->a == test_param->b) + return; + + /* lcm(a,b) == lcm(b,a) */ + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + lcm(test_param->b, test_param->a), + message_fmt, test_param->b, + test_param->a); +} + +struct u32_test_case { + u32 a, b; + u32 result; +}; + +static struct u32_test_case reciprocal_div_cases[] = { + { + .a = 0, .b = 1, + .result = 0, + }, + { + .a = 42, .b = 20, + .result = 2, + }, + { + .a = 42, .b = 9999, + .result = 0, + }, + { + .a = (1 << 16), .b = (1 << 14), + .result = 1 << 2, + }, +}; + +KUNIT_ARRAY_PARAM(reciprocal_div, reciprocal_div_cases, NULL); + +static void reciprocal_div_test(struct kunit *test) +{ + const struct u32_test_case *test_param = test->param_value; + struct reciprocal_value rv = reciprocal_value(test_param->b); + + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + reciprocal_divide(test_param->a, rv), + "reciprocal_divide(%u, %u)", + test_param->a, test_param->b); +} + +static void reciprocal_scale_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, reciprocal_scale(0u, 100), 0u); + KUNIT_EXPECT_EQ(test, reciprocal_scale(1u, 100), 0u); + KUNIT_EXPECT_EQ(test, reciprocal_scale(1u << 4, 1 << 28), 1u); + KUNIT_EXPECT_EQ(test, reciprocal_scale(1u << 16, 1 << 28), 1u << 12); + KUNIT_EXPECT_EQ(test, reciprocal_scale(~0u, 1 << 28), (1u << 28) - 1); +} + +static struct kunit_case math_test_cases[] = { + KUNIT_CASE(abs_test), + KUNIT_CASE(int_sqrt_test), + KUNIT_CASE(round_up_test), + KUNIT_CASE(round_down_test), + KUNIT_CASE(roundup_test), + KUNIT_CASE(rounddown_test), + KUNIT_CASE(div_round_up_test), + KUNIT_CASE(div_round_closest_test), + KUNIT_CASE_PARAM(gcd_test, gcd_gen_params), + KUNIT_CASE_PARAM(lcm_test, lcm_gen_params), + KUNIT_CASE_PARAM(reciprocal_div_test, reciprocal_div_gen_params), + KUNIT_CASE(reciprocal_scale_test), + {} +}; + +static struct kunit_suite math_test_suite = { + .name = "lib-math", + .test_cases = math_test_cases, +}; + +kunit_test_suites(&math_test_suite); + +MODULE_LICENSE("GPL v2"); base-commit: 7e25f40eab52c57ff6772d27d2aef3640a3237d7 -- 2.31.1.368.gbe11c130af-goog

5 months

5
5
0 0

ww_mutex.sh hangs since v5.16-rc1

by Li Zhijian

Hi Folks LKP/0Day found that ww_mutex.sh cannot complete since v5.16-rc1, but I'm pretty sorry that we failed to bisect the FBC, instead, the bisection pointed to a/below merge commit(91e1c99e17) finally. Due to this hang, other tests in the same group are also blocked in 0Day, we hope we can fix this hang ASAP. So if you have any idea about this, or need more debug information, feel free to let me know :) BTW, ww_mutex.sh was failed in v5.15 without hang, and looks it cannot reproduce on a vm. Our box: root@lkp-knm01 ~# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 46 bits physical, 48 bits virtual CPU(s): 288 On-line CPU(s) list: 0-287 Thread(s) per core: 4 Core(s) per socket: 72 Socket(s): 1 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 133 Model name: Intel(R) Xeon Phi(TM) CPU 7295 @ 1.50GHz Stepping: 0 CPU MHz: 1385.255 CPU max MHz: 1600.0000 CPU min MHz: 1000.0000 BogoMIPS: 2992.76 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K NUMA node0 CPU(s): 0-287 NUMA node1 CPU(s): Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ring3mwait cpuid_fault epb pti tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms avx512f rdseed adx avx512pf avx512er avx512cd xsaveopt dtherm ida arat pln pts avx512_vpopcntdq avx512_4vnniw avx512_4fmaps Below the call stack in v5.16-rc2 [ 1000.374954][ T2713] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-136057256686de39cc3a07c2e39ef6bc43003ff6/tools/testing/selftests/locking' [ 1000.375030][ T2713] [ 1000.428791][ T2713] 2021-11-22 22:21:27 make run_tests -C locking [ 1000.428864][ T2713] [ 1000.491043][ T2713] make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-136057256686de39cc3a07c2e39ef6bc43003ff6/tools/testing/selftests/locking' [ 1000.491121][ T2713] [ 1000.540807][ T2713] TAP version 13 [ 1000.540882][ T2713] [ 1000.576050][ T2713] 1..1 [ 1000.576282][ T2713] [ 1000.612980][ T2713] # selftests: locking: ww_mutex.sh [ 1000.613288][ T2713] [ 1495.201324][ T1577] INFO: task kworker/u576:16:1470 blocked for more than 491 seconds. [ 1495.220059][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1495.240902][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1495.265617][ T1577] task:kworker/u576:16 state:D stack: 0 pid: 1470 ppid: 2 flags:0x00004000 [ 1495.289054][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1495.310936][ T1577] Call Trace: [ 1495.327809][ T1577] <TASK> [ 1495.344735][ T1577] __schedule+0xdb0/0x25c0 [ 1495.362764][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1495.382013][ T1577] ? lock_downgrade+0x680/0x680 [ 1495.400894][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1495.418866][ T1577] schedule+0xe4/0x280 [ 1495.435597][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1495.454588][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1495.476189][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1495.497763][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1495.518959][ T1577] ? lock_downgrade+0x680/0x680 [ 1495.536861][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1495.556253][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1495.574003][ T1577] ww_mutex_lock+0x3e/0x380 [ 1495.591958][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1495.612260][ T1577] ? stress_reorder_work+0xa00/0xa00 [test_ww_mutex] [ 1495.632857][ T1577] ? 0xffffffff81000000 [ 1495.649027][ T1577] ? rcu_read_lock_sched_held+0x5f/0x100 [ 1495.668211][ T1577] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 1495.687010][ T1577] process_one_work+0x817/0x13c0 [ 1495.704991][ T1577] ? rcu_read_unlock+0x40/0x40 [ 1495.723024][ T1577] ? pwq_dec_nr_in_flight+0x280/0x280 [ 1495.740211][ T1577] ? rwlock_bug+0xc0/0xc0 [ 1495.758038][ T1577] worker_thread+0x8b/0xd80 [ 1495.775008][ T1577] ? process_one_work+0x13c0/0x13c0 [ 1495.793017][ T1577] kthread+0x3b9/0x4c0 [ 1495.810782][ T1577] ? set_kthread_struct+0x100/0x100 [ 1495.829988][ T1577] ret_from_fork+0x22/0x30 [ 1495.845811][ T1577] </TASK> [ 1495.859087][ T1577] INFO: task kworker/u576:36:1490 blocked for more than 492 seconds. [ 1495.879048][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1495.897879][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1495.919582][ T1577] task:kworker/u576:36 state:D stack: 0 pid: 1490 ppid: 2 flags:0x00004000 [ 1495.941865][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1495.959889][ T1577] Call Trace: [ 1495.974816][ T1577] <TASK> [ 1495.988759][ T1577] __schedule+0xdb0/0x25c0 [ 1495.988759][ T1577] __schedule+0xdb0/0x25c0 [ 1496.003849][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1496.020839][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.036854][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1496.051976][ T1577] schedule+0xe4/0x280 [ 1496.067780][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1496.085004][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1496.101895][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.119889][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1496.137873][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.152657][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1496.168773][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1496.184862][ T1577] ww_mutex_lock+0x3e/0x380 [ 1496.199979][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.216277][ T1577] ? stress_reorder_work+0xa00/0xa00 [test_ww_mutex] [ 1496.234904][ T1577] ? 0xffffffff81000000 [ 1496.249856][ T1577] ? rcu_read_lock_sched_held+0x5f/0x100 [ 1496.265951][ T1577] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 1496.282815][ T1577] process_one_work+0x817/0x13c0 [ 1496.299791][ T1577] ? rcu_read_unlock+0x40/0x40 [ 1496.314754][ T1577] ? pwq_dec_nr_in_flight+0x280/0x280 [ 1496.331779][ T1577] ? rwlock_bug+0xc0/0xc0 [ 1496.348007][ T1577] worker_thread+0x8b/0xd80 [ 1496.362905][ T1577] ? process_one_work+0x13c0/0x13c0 [ 1496.378975][ T1577] kthread+0x3b9/0x4c0 [ 1496.393866][ T1577] ? set_kthread_struct+0x100/0x100 [ 1496.408827][ T1577] ret_from_fork+0x22/0x30 [ 1496.423901][ T1577] </TASK> [ 1496.437994][ T1577] INFO: task kworker/u576:0:15113 blocked for more than 492 seconds. [ 1496.455862][ T1577] Tainted: G B 5.16.0-rc2 #1 [ 1496.473759][ T1577] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1496.494808][ T1577] task:kworker/u576:0 state:D stack: 0 pid:15113 ppid: 2 flags:0x00004000 [ 1496.517000][ T1577] Workqueue: test-ww_mutex test_cycle_work [test_ww_mutex] [ 1496.537035][ T1577] Call Trace: [ 1496.551187][ T1577] <TASK> [ 1496.566405][ T1577] __schedule+0xdb0/0x25c0 [ 1496.582012][ T1577] ? io_schedule_timeout+0x180/0x180 [ 1496.598049][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.615360][ T1577] ? do_raw_spin_lock+0x125/0x2c0 [ 1496.631835][ T1577] schedule+0xe4/0x280 [ 1496.645972][ T1577] schedule_preempt_disabled+0x18/0x40 [ 1496.663774][ T1577] __ww_mutex_lock+0x1248/0x34c0 [ 1496.681795][ T1577] ? test_cycle_work+0x1bb/0x500 [test_ww_mutex] [ 1496.698731][ T1577] ? mutex_lock_interruptible_nested+0x40/0x40 [ 1496.714996][ T1577] ? lock_downgrade+0x680/0x680 [ 1496.730888][ T1577] ? wait_for_completion_interruptible+0x340/0x340 [ 1496.747926][ T1577] ? ww_mutex_lock+0x3e/0x380 [ 1496.762482][ T1577] ww_mutex_lock+0x3e/0x380 [ 1496.778844][ T1577] test_cycle_work+0x1bb/0x500 [test_ww_mutex] And, we found that it occasionally hangs on v5.16-rc3 (1/3 runs), below is a good dmesg. [ 962.136756][ T2950] make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' [ 962.136831][ T2950]- [ 962.205036][ T2950] TAP version 13 [ 962.206003][ T2950]- [ 962.298458][ T2950] 1..1 [ 962.299657][ T2950]- [ 962.345588][ T2950] # selftests: locking: ww_mutex.sh [ 962.345657][ T2950]- [ 973.641869][T25509] All ww mutex selftests passed [ 973.773996][ T2950] # locking/ww_mutex: ok [ 973.774068][ T2950]- [ 973.774236][ T2960] # locking/ww_mutex: ok [ 973.802355][ T2960]- [ 973.829966][ T2950] ok 1 selftests: locking: ww_mutex.sh [ 973.834748][ T2950]- [ 973.838302][ T2960] ok 1 selftests: locking: ww_mutex.sh [ 973.899815][ T2960]- [ 973.921431][ T2950] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' [ 973.932312][ T2950]- [ 973.957345][ T2960] make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-8.3-kselftests-d58071a8a76d779eedab38033ae4c821c30295a5/tools/testing/selftests/locking' Thanks Zhijian@0Day

1 year, 3 months

3
3
0 0

[PATCH v2] selftests/kselftest/runner/run_one(): Allow running non-executable files

by SeongJae Park

From: SeongJae Park <sjpark(a)amazon.de> When running a test program, 'run_one()' checks if the program has the execution permission and fails if it doesn't. However, it's easy to mistakenly missing the permission, as some common tools like 'diff' don't support the permission change well[1]. Compared to that, making mistakes in the test program's path would only rare, as those are explicitly listed in 'TEST_PROGS'. Therefore, it might make more sense to resolve the situation on our own and run the program. For the reason, this commit makes the test program runner function to still print the warning message but try parsing the interpreter of the program and explicitly run it with the interpreter, in the case. [1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/ Suggested-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: SeongJae Park <sjpark(a)amazon.de> --- Changes from v1 (https://lore.kernel.org/linux-kselftest/20210810140459.23990-1-sj38.park@gm…) - Parse and use the interpreter instead of changing the file tools/testing/selftests/kselftest/runner.sh | 28 +++++++++++++-------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/kselftest/runner.sh b/tools/testing/selftests/kselftest/runner.sh index cc9c846585f0..a9ba782d8ca0 100644 --- a/tools/testing/selftests/kselftest/runner.sh +++ b/tools/testing/selftests/kselftest/runner.sh @@ -33,9 +33,9 @@ tap_timeout() { # Make sure tests will time out if utility is available. if [ -x /usr/bin/timeout ] ; then - /usr/bin/timeout --foreground "$kselftest_timeout" "$1" + /usr/bin/timeout --foreground "$kselftest_timeout" $1 else - "$1" + $1 fi } @@ -65,17 +65,25 @@ run_one() TEST_HDR_MSG="selftests: $DIR: $BASENAME_TEST" echo "# $TEST_HDR_MSG" - if [ ! -x "$TEST" ]; then - echo -n "# Warning: file $TEST is " - if [ ! -e "$TEST" ]; then - echo "missing!" - else - echo "not executable, correct this." - fi + if [ ! -e "$TEST" ]; then + echo "# Warning: file $TEST is missing!" echo "not ok $test_num $TEST_HDR_MSG" else + cmd="./$BASENAME_TEST" + if [ ! -x "$TEST" ]; then + echo "# Warning: file $TEST is not executable" + + if [ $(head -n 1 "$TEST" | cut -c -2) = "#!" ] + then + interpreter=$(head -n 1 "$TEST" | cut -c 3-) + cmd="$interpreter ./$BASENAME_TEST" + else + echo "not ok $test_num $TEST_HDR_MSG" + return + fi + fi cd `dirname $TEST` > /dev/null - ((((( tap_timeout ./$BASENAME_TEST 2>&1; echo $? >&3) | + ((((( tap_timeout "$cmd" 2>&1; echo $? >&3) | tap_prefix >&4) 3>&1) | (read xs; exit $xs)) 4>>"$logfile" && echo "ok $test_num $TEST_HDR_MSG") || -- 2.17.1

1 year, 5 months

3
6
0 0

[PATCH v2] selftests: netfilter: fix a build error on openSUSE

by Geliang Tang

This patch fixed the following build error on openSUSE Leap 15.3: ======================================================================= gcc nf-queue.c -lmnl -o tools/testing/selftests/netfilter/nf-queue nf-queue.c:13:10: fatal error: libmnl/libmnl.h: No such file or directory #include <libmnl/libmnl.h> ^~~~~~~~~~~~~~~~~ compilation terminated. ======================================================================= It is because libmnl.h is put in the directory of "/usr/include/libmnl/libmnl/" on openSUSE, not "/usr/include/libmnl/": > rpm -ql libmnl-devel /usr/include/libmnl /usr/include/libmnl/libmnl /usr/include/libmnl/libmnl/libmnl.h /usr/lib64/libmnl.so /usr/lib64/pkgconfig/libmnl.pc Suggested-by: Kai Liu <kai.liu(a)suse.com> Signed-off-by: Geliang Tang <geliang.tang(a)suse.com> --- v2: - use pkg-config --- tools/testing/selftests/netfilter/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index e4f845dd942b..8136c1fab7ab 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -8,6 +8,7 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \ ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \ conntrack_vrf.sh nft_synproxy.sh +CFLAGS += $(shell pkg-config --cflags libmnl 2>/dev/null || echo "-I/usr/include/libmnl") LDLIBS = -lmnl TEST_GEN_FILES = nf-queue -- 2.34.1

1 year, 5 months

5
9
0 0

[PATCH v2 net-next] selftests: forwarding: add Per-Stream Filtering and Policing test for Ocelot

by Vladimir Oltean

The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action which enforced time-based access control per stream. A stream as seen by this switch is identified by {MAC DA, VID}. We use the standard forwarding selftest topology with 2 host interfaces and 2 switch interfaces. The host ports must require timestamping non-IP packets and supporting tc-etf offload, for isochron to work. The isochron program monitors network sync status (ptp4l, phc2sys) and deterministically transmits packets to the switch such that the tc-gate action either (a) always accepts them based on its schedule, or (b) always drops them. I tried to keep as much of the logic that isn't specific to the NXP LS1028A in a new tsn_lib.sh, for future reuse. This covers synchronization using ptp4l and phc2sys, and isochron. The cycle-time chosen for this selftest isn't particularly impressive (and the focus is the functionality of the switch), but I didn't really know what to do better, considering that it will mostly be run during debugging sessions, various kernel bloatware would be enabled, like lockdep, KASAN, etc, and we certainly can't run any races with those on. I tried to look through the kselftest framework for other real time applications and didn't really find any, so I'm not sure how better to prepare the environment in case we want to go for a lower cycle time. At the moment, the only thing the selftest is ensuring is that dynamic frequency scaling is disabled on the CPU that isochron runs on. It would probably be useful to have a blacklist of kernel config options (checked through zcat /proc/config.gz) and some cyclictest scripts to run beforehand, but I saw none of those. Signed-off-by: Vladimir Oltean <vladimir.oltean(a)nxp.com> --- v1->v2: - fix an off-by-one bug introduced at the last minute regarding which tc-mqprio queue was used for tc-etf and SO_TXTIME - introduce debugging for packets incorrectly received / incorrectly dropped based on "isochron report" - make the tsn_lib.sh dependency on isochron and linuxptp optional via REQUIRE_ISOCHRON and REQUIRE_LINUXPTP - avoid errors when CONFIG_CPU_FREQ is disabled - consistently use SCHED_FIFO instead of SCHED_RR for the isochron receiver .../selftests/drivers/net/ocelot/psfp.sh | 327 ++++++++++++++++++ .../selftests/net/forwarding/tsn_lib.sh | 235 +++++++++++++ 2 files changed, 562 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/ocelot/psfp.sh create mode 100644 tools/testing/selftests/net/forwarding/tsn_lib.sh diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh new file mode 100755 index 000000000000..5a5cee92c665 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh @@ -0,0 +1,327 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +# Note: On LS1028A, in lack of enough user ports, this setup requires patching +# the device tree to use the second CPU port as a user port + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh +source $lib_dir/tsn_lib.sh + +UDS_ADDRESS_H1="/var/run/ptp4l_h1" +UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1" + +# Tunables +NUM_PKTS=1000 +STREAM_VID=100 +STREAM_PRIO=6 +# Use a conservative cycle of 10 ms to allow the test to still pass when the +# kernel has some extra overhead like lockdep etc +CYCLE_TIME_NS=10000000 +# Create two Gate Control List entries, one OPEN and one CLOSE, of equal +# durations +GATE_DURATION_NS=$((${CYCLE_TIME_NS} / 2)) +# Give 2/3 of the cycle time to user space and 1/3 to the kernel +FUDGE_FACTOR=$((${CYCLE_TIME_NS} / 3)) +# Shift the isochron base time by half the gate time, so that packets are +# always received by swp1 close to the middle of the time slot, to minimize +# inaccuracies due to network sync +SHIFT_TIME_NS=$((${GATE_DURATION_NS} / 2)) + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# Chain number exported by the ocelot driver for +# Per-Stream Filtering and Policing filters +PSFP() +{ + echo 30000 +} + +psfp_chain_create() +{ + local if_name=$1 + + tc qdisc add dev $if_name clsact + + tc filter add dev $if_name ingress chain 0 pref 49152 flower \ + skip_sw action goto chain $(PSFP) +} + +psfp_chain_destroy() +{ + local if_name=$1 + + tc qdisc del dev $if_name clsact +} + +psfp_filter_check() +{ + local expected=$1 + local packets="" + local drops="" + local stats="" + + stats=$(tc -j -s filter show dev ${swp1} ingress chain $(PSFP) pref 1) + packets=$(echo ${stats} | jq ".[1].options.actions[].stats.packets") + drops=$(echo ${stats} | jq ".[1].options.actions[].stats.drops") + + if ! [ "${packets}" = "${expected}" ]; then + printf "Expected filter to match on %d packets but matched on %d instead\n" \ + "${expected}" "${packets}" + fi + + echo "Hardware filter reports ${drops} drops" +} + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +switch_create() +{ + local h2_mac_addr=$(mac_get $h2) + + ip link set ${swp1} up + ip link set ${swp2} up + + ip link add br0 type bridge vlan_filtering 1 + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up + + bridge vlan add dev ${swp2} vid ${STREAM_VID} + bridge vlan add dev ${swp1} vid ${STREAM_VID} + # PSFP on Ocelot requires the filter to also be added to the bridge + # FDB, and not be removed + bridge fdb add dev ${swp2} \ + ${h2_mac_addr} vlan ${STREAM_VID} static master + + psfp_chain_create ${swp1} + + tc filter add dev ${swp1} ingress chain $(PSFP) pref 1 \ + protocol 802.1Q flower skip_sw \ + dst_mac ${h2_mac_addr} vlan_id ${STREAM_VID} \ + action gate base-time 0.000000000 \ + sched-entry OPEN ${GATE_DURATION_NS} -1 -1 \ + sched-entry CLOSE ${GATE_DURATION_NS} -1 -1 +} + +switch_destroy() +{ + psfp_chain_destroy ${swp1} + ip link del br0 +} + +txtime_setup() +{ + local if_name=$1 + + tc qdisc add dev ${if_name} clsact + # Classify PTP on TC 7 and isochron on TC 6 + tc filter add dev ${if_name} egress protocol 0x88f7 \ + flower action skbedit priority 7 + tc filter add dev ${if_name} egress protocol 802.1Q \ + flower vlan_ethtype 0xdead action skbedit priority 6 + tc qdisc add dev ${if_name} handle 100: parent root mqprio num_tc 8 \ + queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ + map 0 1 2 3 4 5 6 7 \ + hw 1 + # Set up TC 6 for SO_TXTIME. tc-mqprio queues count from 1. + tc qdisc replace dev ${if_name} parent 100:$((${STREAM_PRIO} + 1)) etf \ + clockid CLOCK_TAI offload delta ${FUDGE_FACTOR} +} + +txtime_cleanup() +{ + local if_name=$1 + + tc qdisc del dev ${if_name} root + tc qdisc del dev ${if_name} clsact +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create + + txtime_setup ${h1} + + # Set up swp1 as a master PHC for h1, synchronized to the local + # CLOCK_REALTIME. + phc2sys_start ${swp1} ${UDS_ADDRESS_SWP1} + + # Assumption true for LS1028A: h1 and h2 use the same PHC. So by + # synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized + # to swp1 (and both to CLOCK_REALTIME). + ptp4l_start ${h1} true ${UDS_ADDRESS_H1} + ptp4l_start ${swp1} false ${UDS_ADDRESS_SWP1} + + # Make sure there are no filter matches at the beginning of the test + psfp_filter_check 0 +} + +cleanup() +{ + pre_cleanup + + ptp4l_stop ${swp1} + ptp4l_stop ${h1} + phc2sys_stop + isochron_recv_stop + + txtime_cleanup ${h1} + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +debug_incorrectly_dropped_packets() +{ + local isochron_dat=$1 + local dropped_seqids + local seqid + + echo "Packets incorrectly dropped:" + + dropped_seqids=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u RX hw %T\n" \ + --printf-args "qR" | \ + grep 'RX hw 0.000000000' | \ + awk '{print $1}') + + for seqid in ${dropped_seqids}; do + isochron report \ + --input-file "${isochron_dat}" \ + --start ${seqid} --stop ${seqid} \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T\n" \ + --printf-args "qST" + done +} + +debug_incorrectly_received_packets() +{ + local isochron_dat=$1 + + echo "Packets incorrectly received:" + + isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "seqid %u scheduled for %T, HW TX timestamp %T, HW RX timestamp %T\n" \ + --printf-args "qSTR" | + grep -v 'HW RX timestamp 0.000000000' +} + +run_test() +{ + local base_time=$1 + local expected=$2 + local test_name=$3 + local debug=$4 + local isochron_dat="$(mktemp)" + local extra_args="" + local received + + isochron_do \ + "${h1}" \ + "${h2}" \ + "${UDS_ADDRESS_H1}" \ + "" \ + "${base_time}" \ + "${CYCLE_TIME_NS}" \ + "${SHIFT_TIME_NS}" \ + "${NUM_PKTS}" \ + "${STREAM_VID}" \ + "${STREAM_PRIO}" \ + "" \ + "${isochron_dat}" + + # Count all received packets by looking at the non-zero RX timestamps + received=$(isochron report \ + --input-file "${isochron_dat}" \ + --printf-format "%u\n" --printf-args "R" | \ + grep -w -v '0' | wc -l) + + if [ "${received}" = "${expected}" ]; then + RET=0 + else + RET=1 + echo "Expected isochron to receive ${expected} packets but received ${received}" + fi + + log_test "${test_name}" + + if [ "$RET" = "1" ]; then + ${debug} "${isochron_dat}" + fi + + rm ${isochron_dat} 2> /dev/null +} + +test_gate_in_band() +{ + # Send packets in-band with the OPEN gate entry + run_test 0.000000000 ${NUM_PKTS} "In band" \ + debug_incorrectly_dropped_packets + + psfp_filter_check ${NUM_PKTS} +} + +test_gate_out_of_band() +{ + # Send packets in-band with the CLOSE gate entry + run_test 0.005000000 0 "Out of band" \ + debug_incorrectly_received_packets + + psfp_filter_check $((2 * ${NUM_PKTS})) +} + +trap cleanup EXIT + +ALL_TESTS=" + test_gate_in_band + test_gate_out_of_band +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/tsn_lib.sh b/tools/testing/selftests/net/forwarding/tsn_lib.sh new file mode 100644 index 000000000000..60a1423e8116 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tsn_lib.sh @@ -0,0 +1,235 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2021-2022 NXP + +REQUIRE_ISOCHRON=${REQUIRE_ISOCHRON:=yes} +REQUIRE_LINUXPTP=${REQUIRE_LINUXPTP:=yes} + +# Tunables +UTC_TAI_OFFSET=37 +ISOCHRON_CPU=1 + +if [[ "$REQUIRE_ISOCHRON" = "yes" ]]; then + # https://github.com/vladimiroltean/tsn-scripts + # WARNING: isochron versions pre-1.0 are unstable, + # always use the latest version + require_command isochron +fi +if [[ "$REQUIRE_LINUXPTP" = "yes" ]]; then + require_command phc2sys + require_command ptp4l +fi + +phc2sys_start() +{ + local if_name=$1 + local uds_address=$2 + local extra_args="" + + if ! [ -z "${uds_address}" ]; then + extra_args="${extra_args} -z ${uds_address}" + fi + + phc2sys_log="$(mktemp)" + + chrt -f 10 phc2sys -m \ + -c ${if_name} \ + -s CLOCK_REALTIME \ + -O ${UTC_TAI_OFFSET} \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + ${extra_args} \ + > "${phc2sys_log}" 2>&1 & + phc2sys_pid=$! + + echo "phc2sys logs to ${phc2sys_log} and has pid ${phc2sys_pid}" + + sleep 1 +} + +phc2sys_stop() +{ + { kill ${phc2sys_pid} && wait ${phc2sys_pid}; } 2> /dev/null + rm "${phc2sys_log}" 2> /dev/null +} + +ptp4l_start() +{ + local if_name=$1 + local slave_only=$2 + local uds_address=$3 + local log="ptp4l_log_${if_name}" + local pid="ptp4l_pid_${if_name}" + local extra_args="" + + if [ "${slave_only}" = true ]; then + extra_args="${extra_args} -s" + fi + + # declare dynamic variables ptp4l_log_${if_name} and ptp4l_pid_${if_name} + # as global, so that they can be referenced later + declare -g "${log}=$(mktemp)" + + chrt -f 10 ptp4l -m -2 -P \ + -i ${if_name} \ + --step_threshold 0.00002 \ + --first_step_threshold 0.00002 \ + --tx_timestamp_timeout 100 \ + --uds_address="${uds_address}" \ + ${extra_args} \ + > "${!log}" 2>&1 & + declare -g "${pid}=$!" + + echo "ptp4l for interface ${if_name} logs to ${!log} and has pid ${!pid}" + + sleep 1 +} + +ptp4l_stop() +{ + local if_name=$1 + local log="ptp4l_log_${if_name}" + local pid="ptp4l_pid_${if_name}" + + { kill ${!pid} && wait ${!pid}; } 2> /dev/null + rm "${!log}" 2> /dev/null +} + +cpufreq_max() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + # Kernel may be compiled with CONFIG_CPU_FREQ disabled + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + # declare dynamic variables cpu${cpu}_freq and cpu${cpu}_governor as + # global, so they can be referenced later + declare -g "${freq}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq)" + declare -g "${governor}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor)" + + cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_max_freq > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "performance" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +cpufreq_restore() +{ + local cpu=$1 + local freq="cpu${cpu}_freq" + local governor="cpu${cpu}_governor" + + if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then + return + fi + + echo "${!freq}" > /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq + echo -n "${!governor}" > \ + /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor +} + +isochron_recv_start() +{ + local if_name=$1 + local uds=$2 + local extra_args=$3 + + if ! [ -z "${uds}" ]; then + extra_args="--unix-domain-socket ${uds}" + fi + + isochron rcv \ + --interface ${if_name} \ + --sched-priority 98 \ + --sched-fifo \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --quiet \ + ${extra_args} & \ + isochron_pid=$! + + sleep 1 +} + +isochron_recv_stop() +{ + { kill ${isochron_pid} && wait ${isochron_pid}; } 2> /dev/null +} + +isochron_do() +{ + local sender_if_name=$1; shift + local receiver_if_name=$1; shift + local sender_uds=$1; shift + local receiver_uds=$1; shift + local base_time=$1; shift + local cycle_time=$1; shift + local shift_time=$1; shift + local num_pkts=$1; shift + local vid=$1; shift + local priority=$1; shift + local dst_ip=$1; shift + local isochron_dat=$1; shift + local extra_args="" + local receiver_extra_args="" + local vrf="$(master_name_get ${sender_if_name})" + local use_l2="true" + + if ! [ -z "${dst_ip}" ]; then + use_l2="false" + fi + + if ! [ -z "${vrf}" ]; then + dst_ip="${dst_ip}%${vrf}" + fi + + if ! [ -z "${vid}" ]; then + vid="--vid=${vid}" + fi + + if [ -z "${receiver_uds}" ]; then + extra_args="${extra_args} --omit-remote-sync" + fi + + if ! [ -z "${shift_time}" ]; then + extra_args="${extra_args} --shift-time=${shift_time}" + fi + + if [ "${use_l2}" = "true" ]; then + extra_args="${extra_args} --l2 --etype=0xdead ${vid}" + receiver_extra_args="--l2 --etype=0xdead" + else + extra_args="${extra_args} --l4 --ip-destination=${dst_ip}" + receiver_extra_args="--l4" + fi + + cpufreq_max ${ISOCHRON_CPU} + + isochron_recv_start "${h2}" "${receiver_uds}" "${receiver_extra_args}" + + isochron send \ + --interface ${sender_if_name} \ + --unix-domain-socket ${sender_uds} \ + --priority ${priority} \ + --base-time ${base_time} \ + --cycle-time ${cycle_time} \ + --num-frames ${num_pkts} \ + --frame-size 64 \ + --txtime \ + --utc-tai-offset ${UTC_TAI_OFFSET} \ + --cpu-mask $((1 << ${ISOCHRON_CPU})) \ + --sched-fifo \ + --sched-priority 98 \ + --client 127.0.0.1 \ + --sync-threshold 5000 \ + --output-file ${isochron_dat} \ + ${extra_args} \ + --quiet + + isochron_recv_stop + + cpufreq_restore ${ISOCHRON_CPU} +} -- 2.25.1

1 year, 8 months

5
13
0 0

[PATCH net-next v2 0/3] net: introduce rps_default_mask

by Paolo Abeni

Real-time setups try hard to ensure proper isolation between time critical applications and e.g. network processing performed by the network stack in softirq and RPS is used to move the softirq activity away from the isolated core. If the network configuration is dynamic, with netns and devices routinely created at run-time, enforcing the correct RPS setting on each newly created device allowing to transient bad configuration became complex. These series try to address the above, introducing a new sysctl knob: rps_default_mask. The new sysctl entry allows configuring a systemwide RPS mask, to be enforced since receive queue creation time without any fourther per device configuration required. Additionally, a simple self-test is introduced to check the rps_default_mask behavior. v1 -> v2: - fix sparse warning in patch 2/3 Paolo Abeni (3): net/sysctl: factor-out netdev_rx_queue_set_rps_mask() helper net/core: introduce default_rps_mask netns attribute self-tests: introduce self-tests for RPS default mask Documentation/admin-guide/sysctl/net.rst | 6 ++ include/linux/netdevice.h | 1 + net/core/net-sysfs.c | 73 +++++++++++-------- net/core/sysctl_net_core.c | 58 +++++++++++++++ tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 3 + .../testing/selftests/net/rps_default_mask.sh | 57 +++++++++++++++ 7 files changed, 169 insertions(+), 30 deletions(-) create mode 100755 tools/testing/selftests/net/rps_default_mask.sh -- 2.26.2

1 year, 8 months

4
12
0 0

[PATCH v14 00/39] arm64/sme: Initial support for the Scalable Matrix Extension

by Mark Brown

This series provides initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. A more detailed overview can be found in [1]. For the kernel SME can be thought of as a series of features which are intended to be used together by applications but operate mostly orthogonally: - The ZA matrix register. - Streaming mode, in which ZA can be accessed and a subset of SVE features are available. - A second vector length, used for streaming mode SVE and ZA and controlled using a similar interface to that for SVE. - TPIDR2, a new userspace controllable system register intended for use by the C library for storing context related to the ZA ABI. A substantial part of the series is dedicated to refactoring the existing SVE support so that we don't need to duplicate code for handling vector lengths and the SVE registers, this involves creating an array of vector types and making the users take the vector type as a parameter. I'm not 100% happy with this but wasn't able to come up with anything better, duplicating code definitely felt like a bad idea so this felt like the least bad thing. If this approach makes sense to people it might make sense to split this off into a separate series and/or merge it while the rest is pending review to try to make things a little more digestable, the series is very large so it'd probably make things easier to digest if some of the preparatory refactoring could be merged before the rest is ready. One feature of the architecture of particular note is that switching to and from streaming mode may change the size of and invalidate the contents of the SVE registers, and when in streaming mode the FFR is not accessible. This complicates aspects of the ABI like signal handling and ptrace. This initial implementation is mainly intended to get the ABI in place, there are several areas which will be worked on going forwards - some of these will be blockers, others could be handled in followup serieses: - SME is currently not supported for KVM guests, this will be done as a followup series. A host system can use SME and run KVM guests but SME is not available in the guests. - The KVM host support is done in a very simplistic way, were anyone to attempt to use it in production there would be performance impacts on hosts with SME support. As part of this we also add enumeration of fine grained traps. - There is not currently ptrace or signal support TPIDR2, this will be done as a followup series. - No support is currently provided for scheduler control of SME or SME applications, given the size of the SME register state the context switch overhead may be noticable so this may be needed especially for real time applications. Similar concerns already exist for larger SVE vector lengths but are amplified for SME, particularly as the vector length increases. - There has been no work on optimising the performance of anything the kernel does. It is not expected that any systems will be encountered that support SME but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9. The code attempts to handle any such systems that are encountered but this hasn't been tested extensively. v14: - Rebase onto v5.18-rc3. v13: - Preserve ZA in both parent and child on clone() and add a test case for this. - Fix EFI integration for FA64. - Minor tweaks to the ABI document following Catlain's review. - Add and make use of thread_get_cur_vl() helper. - Fix some issues with SVE/FPSIMD register type moves in streaming SVE ptrace. - Typo fixes. - Roll in separately posted series extending ptrace coverage in kselftest for better integrated testing of the series. v12: - Fix some typos in the ABI document. - Print a message when we skip a vector length in the signal tests. - Add note of earliest toolchain versions with SME to manual encodings for future reference now that's landed. - Drop reference to PCS in sme.rst, it's not referenced and one of the links was broken. - Encode smstop and smstart as sysregs in the kernel. - Don't redundantly flush the SVE register state when loading FPSIMD state with SME enabled for the task, the architecture will do this for us. - Introduce and use task_get_cur_vl() to get the vector length for the currently active SVE registers. - Fix support for !FA64 mode in signal and syscall tests. - Simplify instruction sequence for ssve_regs signal test. - Actually include the ZA signal test in the patch set. v11: - Rebase onto v5.17-rc3. - Provide a sme-inst.h to collect manual encodings in kselftest. v10: - Actually do the rebase of fixups from the previous version into relevant patches. v9: - Remove defensive programming around IS_ENABLED() and FGT in KVM code. - Fix naming of TPIDR2 FGT register bit. - Add patches making handling of floating point register bits more consistent (also sent as separate series). - Drop now unused enumeration of fine grained traps. v8: - Rebase onto v5.17-rc1. - Support interoperation with KVM, SME is disabled for KVM guests with minimal handling for cleaning up SME state when entering and leaving the guest. - Document and implement that signal handlers are invoked with ZA and streaming mode disabled. - Use the RDSVL instruction introduced in EAC2 of the architecture to obtain the streaming mode vector length during enumeration, ZA state loading/saving and in test programs. - Store a pointer to SVCR in fpsimd_last_state and use it in fpsimd_save() for interoperation with KVM. - Add a test case sme_trap_no_sm checking that we generate a SIGILL when using an instruction that requires streaming mode without enabling it. - Add basic ZA context form validation to testcases helper library. - Move signal tests over to validating streaming VL from ZA information. - Pulled in patch removing ARRAY_SIZE() so that kselftest builds cleanly and to avoid trivial conflicts. v7: - Rebase onto v5.16-rc3. - Reduce indentation when supporting custom triggers for signal tests as suggested by Catalin. - Change to specifying a width for all CPU features rather than adding single bit specific infrastructure. - Don't require zeroing of non-shared SVE state during syscalls. v6: - Rebase onto v5.16-rc1. - Return to disabling TIF_SVE on kernel entry even if we have SME state, this avoids the need for KVM to handle the case where TIF_SVE is set on guest entry. - Add syscall-abi.h to SME updates to syscall-abi, mistakenly omitted from commit. v5: - Rebase onto currently merged SVE and kselftest patches. - Add support for the FA64 option, introduced in the recently published EAC1 update to the specification. - Pull in test program for the syscall ABI previously sent separately with some revisions and add coverage for the SME ABI. - Fix checking for options with 1 bit fields in ID_AA64SMFR0_EL1. - Minor fixes and clarifications to the ABI documentation. v4: - Rebase onto merged patches. - Remove an uneeded NULL check in vec_proc_do_default_vl(). - Include patch to factor out utility routines in kselftests written in assembler. - Specify -ffreestanding when building TPIDR2 test. v3: - Skip FFR rather than predicate registers in sve_flush_live(). - Don't assume a bool is all zeros in sve_flush_live() as per AAPCS. - Don't redundantly specify a zero index when clearing FFR. v2: - Fix several issues with !SME and !SVE configurations. - Preserve TPIDR2 when creating a new thread/process unless CLONE_SETTLS is set. - Report traps due to using features in an invalid mode as SIGILL. - Spell out streaming mode behaviour in SVE ABI documentation more directly. - Document TPIDR2 in the ABI document. - Use SMSTART and SMSTOP rather than read/modify/write sequences. - Rework logic for exiting streaming mode on syscall. - Don't needlessly initialise SVCR on access trap. - Always restore SME VL for userspace if SME traps are disabled. - Only yield to encourage preemption every 128 iterations in za-test, otherwise do a getpid(), and validate SVCR after syscall. - Leave streaming mode disabled except when reading the vector length in za-test, and disable ZA after detecting a mismatch. - Add SME support to vlset. - Clarifications and typo fixes in comments. - Move sme_alloc() forward declaration back a patch. [1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-… Mark Brown (39): kselftest/arm64: Fix comment for ptrace_sve_get_fpsimd_data() kselftest/arm64: Remove assumption that tasks start FPSIMD only kselftest/arm64: Validate setting via FPSIMD and read via SVE regsets arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/sme: Provide Kconfig for SME kselftest/arm64: Add manual encodings for SME instructions kselftest/arm64: sme: Add SME support to vlset kselftest/arm64: Add tests for TPIDR2 kselftest/arm64: Extend vector configuration API tests to cover SME kselftest/arm64: sme: Provide streaming mode SVE stress test kselftest/arm64: signal: Handle ZA signal context in core code kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: Add coverage for the ZA ptrace interface kselftest/arm64: Add SME support to syscall ABI test selftests/arm64: Add a testcase for handling of ZA on clone() Documentation/arm64/elf_hwcaps.rst | 33 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 428 +++++++++++++ Documentation/arm64/sve.rst | 70 ++- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpufeature.h | 24 + arch/arm64/include/asm/el2_setup.h | 64 +- arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 123 +++- arch/arm64/include/asm/fpsimdmacros.h | 87 +++ arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/kvm_host.h | 4 + arch/arm64/include/asm/processor.h | 26 +- arch/arm64/include/asm/sysreg.h | 67 ++ arch/arm64/include/asm/thread_info.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 ++- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 106 ++++ arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 36 ++ arch/arm64/kernel/fpsimd.c | 585 ++++++++++++++++-- arch/arm64/kernel/process.c | 44 +- arch/arm64/kernel/ptrace.c | 358 +++++++++-- arch/arm64/kernel/signal.c | 188 +++++- arch/arm64/kernel/syscall.c | 29 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 43 +- arch/arm64/kvm/hyp/nvhe/switch.c | 30 + arch/arm64/kvm/hyp/vhe/switch.c | 11 +- arch/arm64/kvm/sys_regs.c | 9 +- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 9 +- .../selftests/arm64/abi/syscall-abi-asm.S | 79 ++- .../testing/selftests/arm64/abi/syscall-abi.c | 204 +++++- .../testing/selftests/arm64/abi/syscall-abi.h | 15 + tools/testing/selftests/arm64/abi/tpidr2.c | 298 +++++++++ tools/testing/selftests/arm64/fp/.gitignore | 5 + tools/testing/selftests/arm64/fp/Makefile | 19 +- tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 + tools/testing/selftests/arm64/fp/rdvl.S | 10 + tools/testing/selftests/arm64/fp/rdvl.h | 1 + tools/testing/selftests/arm64/fp/sme-inst.h | 51 ++ tools/testing/selftests/arm64/fp/ssve-stress | 59 ++ tools/testing/selftests/arm64/fp/sve-ptrace.c | 175 +++++- tools/testing/selftests/arm64/fp/sve-test.S | 20 + tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 + tools/testing/selftests/arm64/fp/vlset.c | 10 +- .../testing/selftests/arm64/fp/za-fork-asm.S | 61 ++ tools/testing/selftests/arm64/fp/za-fork.c | 156 +++++ tools/testing/selftests/arm64/fp/za-ptrace.c | 356 +++++++++++ tools/testing/selftests/arm64/fp/za-stress | 59 ++ tools/testing/selftests/arm64/fp/za-test.S | 388 ++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 3 + .../selftests/arm64/signal/test_signals.h | 4 + .../arm64/signal/test_signals_utils.c | 6 + .../testcases/fake_sigreturn_sme_change_vl.c | 92 +++ .../arm64/signal/testcases/sme_trap_no_sm.c | 38 ++ .../signal/testcases/sme_trap_non_streaming.c | 45 ++ .../arm64/signal/testcases/sme_trap_za.c | 36 ++ .../selftests/arm64/signal/testcases/sme_vl.c | 68 ++ .../arm64/signal/testcases/ssve_regs.c | 135 ++++ .../arm64/signal/testcases/testcases.c | 36 ++ .../arm64/signal/testcases/testcases.h | 3 +- .../arm64/signal/testcases/za_regs.c | 128 ++++ 73 files changed, 4991 insertions(+), 191 deletions(-) create mode 100644 Documentation/arm64/sme.rst create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.h create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c create mode 100644 tools/testing/selftests/arm64/fp/sme-inst.h create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress create mode 100644 tools/testing/selftests/arm64/fp/za-fork-asm.S create mode 100644 tools/testing/selftests/arm64/fp/za-fork.c create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/za-stress create mode 100644 tools/testing/selftests/arm64/fp/za-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_no_sm.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_non_streaming.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/za_regs.c base-commit: b2d229d4ddb17db541098b83524d901257e93845 -- 2.30.2

1 year, 10 months

8
58
0 0

[PATCH v2 0/2] livepatch: Move tests from lib/livepatch to selftests/livepatch

by Marcos Paulo de Souza

Hi there, this is the v2 of the patchset. The v1 can be found at [1]. There is only one change in patch 1, which changed the target directory to build the test modules. All other changes happen in patch 2. Thanks for reviewing! Changes from v1: # test_modules/Makefile * Build the test modules targeting /lib/modules, instead of ksrc when building from the kernel source. # test_modules/test_klp_syscall.c * Added a parameter array to receive the pids that should transition to the new system call. (suggedted by Joe) * Create a new sysfs file /sys/kernel/test_klp_syscall/npids to show how many pids from the argument need to transition to the new state. (suggested by Joe) * Fix the PPC32 support by adding the syscall wrapper for archs that select it by default, without erroring out. PPC does not set SYSCALL_WRAPPER, so having it set in v1 was a mistake. (suggested by Joe) * The aarch64 syscall prefix was added too, since the livepatch support will come soon. # test_binaries/test_klp-call_getpid.c * Change %d/%u in printf (suggested byu Joe) * Change run -> stop variable name, and inverted the assignments (suggested by * Joe). # File test-syscall.sh * Fixed test-syscall.sh to call test_klp-call-getpid in test_binaries dir * Load test_klp_syscall passed the pids of the test_klp-call_getpid instances. Check the sysfs file from test_klp_syscall module to check that all pids transitioned correctly. (suggested by Joe) * Simplified the loop that calls test_klp-call_getpid. (suggested by Joe) * Removed the "success" comment from the script, as it's implicit that it succeed. Otherwise load_lp would error out. (suggested by Joe) * Changed the commit message of patch 2 to further detail what means "tricky" when livepatching syscalls. (suggested by Joe) [1]: 20220603143242.870-1-mpdesouza(a)suse.com Marcos Paulo de Souza (2): livepatch: Move tests from lib/livepatch to selftests/livepatch selftests: livepatch: Test livepatching a heavily called syscall arch/s390/configs/debug_defconfig | 1 - arch/s390/configs/defconfig | 1 - lib/Kconfig.debug | 22 --- lib/Makefile | 2 - lib/livepatch/Makefile | 14 -- tools/testing/selftests/livepatch/Makefile | 35 +++- tools/testing/selftests/livepatch/README | 5 +- tools/testing/selftests/livepatch/config | 1 - .../testing/selftests/livepatch/functions.sh | 34 ++-- .../selftests/livepatch/test-callbacks.sh | 50 +++--- .../selftests/livepatch/test-ftrace.sh | 6 +- .../selftests/livepatch/test-livepatch.sh | 10 +- .../selftests/livepatch/test-shadow-vars.sh | 2 +- .../testing/selftests/livepatch/test-state.sh | 18 +-- .../selftests/livepatch/test-syscall.sh | 52 ++++++ .../test_binaries/test_klp-call_getpid.c | 48 ++++++ .../selftests/livepatch/test_modules/Makefile | 20 +++ .../test_modules}/test_klp_atomic_replace.c | 0 .../test_modules}/test_klp_callbacks_busy.c | 0 .../test_modules}/test_klp_callbacks_demo.c | 0 .../test_modules}/test_klp_callbacks_demo2.c | 0 .../test_modules}/test_klp_callbacks_mod.c | 0 .../test_modules}/test_klp_livepatch.c | 0 .../test_modules}/test_klp_shadow_vars.c | 0 .../livepatch/test_modules}/test_klp_state.c | 0 .../livepatch/test_modules}/test_klp_state2.c | 0 .../livepatch/test_modules}/test_klp_state3.c | 0 .../livepatch/test_modules/test_klp_syscall.c | 150 ++++++++++++++++++ 28 files changed, 360 insertions(+), 111 deletions(-) delete mode 100644 lib/livepatch/Makefile create mode 100755 tools/testing/selftests/livepatch/test-syscall.sh create mode 100644 tools/testing/selftests/livepatch/test_binaries/test_klp-call_getpid.c create mode 100644 tools/testing/selftests/livepatch/test_modules/Makefile rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_atomic_replace.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_busy.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_demo.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_demo2.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_callbacks_mod.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_livepatch.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_shadow_vars.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state2.c (100%) rename {lib/livepatch => tools/testing/selftests/livepatch/test_modules}/test_klp_state3.c (100%) create mode 100644 tools/testing/selftests/livepatch/test_modules/test_klp_syscall.c -- 2.35.3

1 year, 10 months

6
21
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror June 2022