April 2022 - Linux-kselftest-mirror

[PATCH 0/4] mm/memfd: MFD_NOEXEC for memfd_create

by Daniel Verkamp

The default file permissions on a memfd include execute bits, which means that such a memfd can be filled with a executable and passed to the exec() family of functions. This is undesirable on systems where all code is verified and all filesystems are intended to be mounted noexec, since an attacker may be able to use a memfd to load unverified code and execute it. Additionally, execution via memfd is a common way to avoid scrutiny for malicious code, since it allows execution of a program without a file ever appearing on disk. This attack vector is not totally mitigated with this new flag, since the default memfd file permissions must remain executable to avoid breaking existing legitimate uses, but it should be possible to use other security mechanisms to prevent memfd_create calls without MFD_NOEXEC on systems where it is known that executable memfds are not necessary. This patch series adds a new MFD_NOEXEC flag for memfd_create(), which allows creation of non-executable memfds, and as part of the implementation of this new flag, it also adds a new F_SEAL_EXEC seal, which will prevent modification of any of the execute bits of a sealed memfd. I am not sure if this is the best way to implement the desired behavior (for example, the F_SEAL_EXEC seal is really more of an implementation detail and feels a bit clunky to expose), so suggestions are welcome for alternate approaches. Daniel Verkamp (4): mm/memfd: add F_SEAL_EXEC mm/memfd: add MFD_NOEXEC flag to memfd_create selftests/memfd: add tests for F_SEAL_EXEC selftests/memfd: add tests for MFD_NOEXEC include/uapi/linux/fcntl.h | 1 + include/uapi/linux/memfd.h | 1 + mm/memfd.c | 12 ++- mm/shmem.c | 6 ++ tools/testing/selftests/memfd/memfd_test.c | 114 +++++++++++++++++++++ 5 files changed, 133 insertions(+), 1 deletion(-) -- 2.35.1.1094.g7c7d902a7c-goog

2 years, 2 months

3
10
0 0

[PATCH] selftests/ftrace: func_event_triggers: fix typo in user message

by Randy Dunlap

Correct typo of "it's" to "it". Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- linux-next-20211224.orig/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc +++ linux-next-20211224/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc @@ -85,7 +85,7 @@ run_enable_disable() { echo $check_disable > $EVENT_ENABLE done sleep $SLEEP_TIME - echo " make sure it's still works" + echo " make sure it still works" test_event_enabled $check_enable_star reset_ftrace_filter

2 years, 3 months

2
2
0 0

Re: [PATCH 2/2] kvm: rename KVM_MAX_VCPU_ID to, KVM_MAX_VCPU_IDS

by Christian Zigotzky

Hello Juergen, Hello All, Since the RC1 of kernel 5.13, -smp 2 and -smp 4 don't work with a virtual e5500 QEMU KVM-HV machine anymore. [1] I see in the serial console, that the uImage doesn't load. I use the following QEMU command for booting: qemu-system-ppc64 -M ppce500 -cpu e5500 -enable-kvm -m 1024 -kernel uImage -drive format=raw,file=MintPPC32-X5000.img,index=0,if=virtio -netdev user,id=mynet0 -device virtio-net,netdev=mynet0 -append "rw root=/dev/vda" -device virtio-vga -device virtio-mouse-pci -device virtio-keyboard-pci -device pci-ohci,id=newusb -device usb-audio,bus=newusb.0 -smp 4 The kernels boot without KVM-HV. Summary for KVM-HV: -smp 1 -> works -smp 2 -> doesn't work -smp 3 -> works -smp 4 -> doesn't work I used -smp 4 before the RC1 of kernel 5.13 because my FSL P5040 BookE machine [2] has 4 cores. Does this patch solve this issue? [3] Thanks, Christian [1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2021-May/229103.html [2] http://wiki.amiga.org/index.php?title=X5000 [3] https://lists.ozlabs.org/pipermail/linuxppc-dev/2021-September/234152.html

2 years, 3 months

1
1
0 0

[PATCH] Documentation: kunit: eliminate code-block warnings

by Randy Dunlap

Fix Sphinx complaints about code-block directive missing an argument. For start.rst, add "none" since that is already heavily used in that file. For run_wrapper.rst, use the simpler "::" literal block instead. dev-tools/kunit/start.rst:83: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:17: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:23: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:31: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:51: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:57: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:78: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:85: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:109: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:116: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:124: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:139: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:162: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. Fixes: c48b9ef1f794 ("Documentation: KUnit: Rewrite getting started") Fixes: 46201d47d6c4 ("Documentation: kunit: Reorganize documentation related to running tests") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Brendan Higgins <brendanhiggins(a)google.com> Cc: linux-kselftest(a)vger.kernel.org Cc: kunit-dev(a)googlegroups.com Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: linux-doc(a)vger.kernel.org Cc: Harinder Singh <sharinder(a)google.com> Cc: Tim Bird <tim.bird(a)sony.com> --- Documentation/dev-tools/kunit/run_wrapper.rst | 24 ++++++++-------- Documentation/dev-tools/kunit/start.rst | 2 - 2 files changed, 13 insertions(+), 13 deletions(-) --- linux-next-20220331.orig/Documentation/dev-tools/kunit/run_wrapper.rst +++ linux-next-20220331/Documentation/dev-tools/kunit/run_wrapper.rst @@ -14,13 +14,13 @@ tests, and formats the test results. Run command: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run We should see the following: -.. code-block:: +:: Generating .config... Building KUnit kernel... @@ -28,7 +28,7 @@ We should see the following: We may want to use the following options: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all @@ -48,13 +48,13 @@ test configs for certain subsystems. To use a different ``.kunitconfig`` file (such as one provided to test a particular subsystem), pass it as an option: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig To view kunit_tool flags (optional command-line arguments), run: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --help @@ -75,14 +75,14 @@ certain code blocks, arch configs and so To create a ``.kunitconfig``, using the KUnit ``defconfig``: -.. code-block:: +:: cd $PATH_TO_LINUX_REPO cp tools/testing/kunit/configs/default.config .kunit/.kunitconfig We can then add any other Kconfig options. For example: -.. code-block:: +:: CONFIG_LIST_KUNIT_TEST=y @@ -106,14 +106,14 @@ can run part of the KUnit build process When running kunit_tool, from a ``.kunitconfig``, we can generate a ``.config`` by using the ``config`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py config To build a KUnit kernel from the current ``.config``, we can use the ``build`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py build @@ -121,7 +121,7 @@ If we already have built UML kernel with can run the kernel, and display the test results with the ``exec`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py exec @@ -136,7 +136,7 @@ format. When running tests, kunit_tool p a summary. To see the raw test results in TAP format, we can pass the ``--raw_output`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --raw_output @@ -159,7 +159,7 @@ By passing a bash style glob filter to t commands, we can run a subset of the tests built into a kernel . For example: if we only want to run KUnit resource tests, use: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run 'kunit-resource*' --- linux-next-20220331.orig/Documentation/dev-tools/kunit/start.rst +++ linux-next-20220331/Documentation/dev-tools/kunit/start.rst @@ -80,7 +80,7 @@ Running Tests (KUnit Wrapper) If everything worked correctly, you should see the following: -.. code-block:: +.. code-block:: none Generating .config ... Building KUnit Kernel ...

2 years, 3 months

4
7
0 0

[PATCH 0/2] selftests/x86: AMX-related test improvements

by Chang S. Bae

A couple of test updates are included: * With this option [1,2], the kernel's altstack check becomes stringent. The x86 sigaltstack test is ignorant about this. Adjust the test now. This check was established [3] to ensure every AMX task's altstack is sufficient (regardless of that option) [4]. * The AMX test wrongly fails on non-AMX machines. Fix the code to skip the test instead. The series is available in this repository: git://github.com/intel/amx-linux.git selftest [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Doc… [3] 3aac3ebea08f ("x86/signal: Implement sigaltstack size validation") [4] 4b7ca609a33d ("x86/signal: Use fpu::__state_user_size for sigalt stack validation") Chang S. Bae (2): selftests/x86/signal: Adjust the test to the kernel's altstack check selftests/x86/amx: Fix the test to avoid failure when AMX is unavailable tools/testing/selftests/x86/amx.c | 42 +++++++++++++++++------ tools/testing/selftests/x86/sigaltstack.c | 12 ++++++- 2 files changed, 42 insertions(+), 12 deletions(-) base-commit: f443e374ae131c168a065ea1748feac6b2e76613 -- 2.17.1

2 years, 4 months

2
7
0 0

[PATCH v12 00/40] arm64/sme: Initial support for the Scalable Matrix Extension

by Mark Brown

This series provides initial support for the ARMv9 Scalable Matrix Extension (SME). SME takes the approach used for vectors in SVE and extends this to provide architectural support for matrix operations. A more detailed overview can be found in [1]. For the kernel SME can be thought of as a series of features which are intended to be used together by applications but operate mostly orthogonally: - The ZA matrix register. - Streaming mode, in which ZA can be accessed and a subset of SVE features are available. - A second vector length, used for streaming mode SVE and ZA and controlled using a similar interface to that for SVE. - TPIDR2, a new userspace controllable system register intended for use by the C library for storing context related to the ZA ABI. A substantial part of the series is dedicated to refactoring the existing SVE support so that we don't need to duplicate code for handling vector lengths and the SVE registers, this involves creating an array of vector types and making the users take the vector type as a parameter. I'm not 100% happy with this but wasn't able to come up with anything better, duplicating code definitely felt like a bad idea so this felt like the least bad thing. If this approach makes sense to people it might make sense to split this off into a separate series and/or merge it while the rest is pending review to try to make things a little more digestable, the series is very large so it'd probably make things easier to digest if some of the preparatory refactoring could be merged before the rest is ready. One feature of the architecture of particular note is that switching to and from streaming mode may change the size of and invalidate the contents of the SVE registers, and when in streaming mode the FFR is not accessible. This complicates aspects of the ABI like signal handling and ptrace. This initial implementation is mainly intended to get the ABI in place, there are several areas which will be worked on going forwards - some of these will be blockers, others could be handled in followup serieses: - SME is currently not supported for KVM guests, this will be done as a followup series. A host system can use SME and run KVM guests but SME is not available in the guests. - The KVM host support is done in a very simplistic way, were anyone to attempt to use it in production there would be performance impacts on hosts with SME support. As part of this we also add enumeration of fine grained traps. - There is not currently ptrace or signal support TPIDR2, this will be done as a followup series. - No support is currently provided for scheduler control of SME or SME applications, given the size of the SME register state the context switch overhead may be noticable so this may be needed especially for real time applications. Similar concerns already exist for larger SVE vector lengths but are amplified for SME, particularly as the vector length increases. - There has been no work on optimising the performance of anything the kernel does. It is not expected that any systems will be encountered that support SME but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9. The code attempts to handle any such systems that are encountered but this hasn't been tested extensively. v12: - Fix some typos in the ABI document. - Print a message when we skip a vector length in the signal tests. - Add note of earliest toolchain versions with SME to manual encodings for future reference now that's landed. - Drop reference to PCS in sme.rst, it's not referenced and one of the links was broken. - Encode smstop and smstart as sysregs in the kernel. - Don't redundantly flush the SVE register state when loading FPSIMD state with SME enabled for the task, the architecture will do this for us. - Introduce and use task_get_cur_vl() to get the vector length for the currently active SVE registers. - Fix support for !FA64 mode in signal and syscall tests. - Simplify instruction sequence for ssve_regs signal test. - Actually include the ZA signal test in the patch set. v11: - Rebase onto v5.17-rc3. - Provide a sme-inst.h to collect manual encodings in kselftest. v10: - Actually do the rebase of fixups from the previous version into relevant patches. v9: - Remove defensive programming around IS_ENABLED() and FGT in KVM code. - Fix naming of TPIDR2 FGT register bit. - Add patches making handling of floating point register bits more consistent (also sent as separate series). - Drop now unused enumeration of fine grained traps. v8: - Rebase onto v5.17-rc1. - Support interoperation with KVM, SME is disabled for KVM guests with minimal handling for cleaning up SME state when entering and leaving the guest. - Document and implement that signal handlers are invoked with ZA and streaming mode disabled. - Use the RDSVL instruction introduced in EAC2 of the architecture to obtain the streaming mode vector length during enumeration, ZA state loading/saving and in test programs. - Store a pointer to SVCR in fpsimd_last_state and use it in fpsimd_save() for interoperation with KVM. - Add a test case sme_trap_no_sm checking that we generate a SIGILL when using an instruction that requires streaming mode without enabling it. - Add basic ZA context form validation to testcases helper library. - Move signal tests over to validating streaming VL from ZA information. - Pulled in patch removing ARRAY_SIZE() so that kselftest builds cleanly and to avoid trivial conflicts. v7: - Rebase onto v5.16-rc3. - Reduce indentation when supporting custom triggers for signal tests as suggested by Catalin. - Change to specifying a width for all CPU features rather than adding single bit specific infrastructure. - Don't require zeroing of non-shared SVE state during syscalls. v6: - Rebase onto v5.16-rc1. - Return to disabling TIF_SVE on kernel entry even if we have SME state, this avoids the need for KVM to handle the case where TIF_SVE is set on guest entry. - Add syscall-abi.h to SME updates to syscall-abi, mistakenly omitted from commit. v5: - Rebase onto currently merged SVE and kselftest patches. - Add support for the FA64 option, introduced in the recently published EAC1 update to the specification. - Pull in test program for the syscall ABI previously sent separately with some revisions and add coverage for the SME ABI. - Fix checking for options with 1 bit fields in ID_AA64SMFR0_EL1. - Minor fixes and clarifications to the ABI documentation. v4: - Rebase onto merged patches. - Remove an uneeded NULL check in vec_proc_do_default_vl(). - Include patch to factor out utility routines in kselftests written in assembler. - Specify -ffreestanding when building TPIDR2 test. v3: - Skip FFR rather than predicate registers in sve_flush_live(). - Don't assume a bool is all zeros in sve_flush_live() as per AAPCS. - Don't redundantly specify a zero index when clearing FFR. v2: - Fix several issues with !SME and !SVE configurations. - Preserve TPIDR2 when creating a new thread/process unless CLONE_SETTLS is set. - Report traps due to using features in an invalid mode as SIGILL. - Spell out streaming mode behaviour in SVE ABI documentation more directly. - Document TPIDR2 in the ABI document. - Use SMSTART and SMSTOP rather than read/modify/write sequences. - Rework logic for exiting streaming mode on syscall. - Don't needlessly initialise SVCR on access trap. - Always restore SME VL for userspace if SME traps are disabled. - Only yield to encourage preemption every 128 iterations in za-test, otherwise do a getpid(), and validate SVCR after syscall. - Leave streaming mode disabled except when reading the vector length in za-test, and disable ZA after detecting a mismatch. - Add SME support to vlset. - Clarifications and typo fixes in comments. - Move sme_alloc() forward declaration back a patch. [1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-… Mark Brown (40): arm64: Define CPACR_EL1_FPEN similarly to other floating point controls arm64: Always use individual bits in CPACR floating point enables arm64: cpufeature: Always specify and use a field width for capabilities kselftest/arm64: Remove local ARRAY_SIZE() definitions kselftest/arm64: signal: Allow tests to be incompatible with features arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/sme: Provide Kconfig for SME kselftest/arm64: Add manual encodings for SME instructions kselftest/arm64: sme: Add SME support to vlset kselftest/arm64: Add tests for TPIDR2 kselftest/arm64: Extend vector configuration API tests to cover SME kselftest/arm64: sme: Provide streaming mode SVE stress test kselftest/arm64: signal: Handle ZA signal context in core code kselftest/arm64: Add stress test for SME ZA context switching kselftest/arm64: signal: Add SME signal handling tests kselftest/arm64: Add streaming SVE to SVE ptrace tests kselftest/arm64: Add coverage for the ZA ptrace interface kselftest/arm64: Add SME support to syscall ABI test Documentation/arm64/elf_hwcaps.rst | 33 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 427 +++++++++++++ Documentation/arm64/sve.rst | 70 ++- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpufeature.h | 25 + arch/arm64/include/asm/el2_setup.h | 64 +- arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 110 +++- arch/arm64/include/asm/fpsimdmacros.h | 87 +++ arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 5 +- arch/arm64/include/asm/kvm_host.h | 4 + arch/arm64/include/asm/processor.h | 26 +- arch/arm64/include/asm/sysreg.h | 71 ++- arch/arm64/include/asm/thread_info.h | 2 + arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 ++- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 273 +++++++-- arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 36 ++ arch/arm64/kernel/fpsimd.c | 565 ++++++++++++++++-- arch/arm64/kernel/process.c | 28 +- arch/arm64/kernel/ptrace.c | 356 +++++++++-- arch/arm64/kernel/signal.c | 188 +++++- arch/arm64/kernel/syscall.c | 29 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 43 +- arch/arm64/kvm/hyp/include/hyp/switch.h | 4 +- arch/arm64/kvm/hyp/nvhe/switch.c | 30 + arch/arm64/kvm/hyp/vhe/switch.c | 15 +- arch/arm64/kvm/sys_regs.c | 9 +- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 9 +- .../selftests/arm64/abi/syscall-abi-asm.S | 79 ++- .../testing/selftests/arm64/abi/syscall-abi.c | 205 ++++++- .../testing/selftests/arm64/abi/syscall-abi.h | 15 + tools/testing/selftests/arm64/abi/tpidr2.c | 298 +++++++++ tools/testing/selftests/arm64/fp/.gitignore | 4 + tools/testing/selftests/arm64/fp/Makefile | 12 +- tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 + tools/testing/selftests/arm64/fp/rdvl.S | 10 + tools/testing/selftests/arm64/fp/rdvl.h | 1 + tools/testing/selftests/arm64/fp/sme-inst.h | 51 ++ tools/testing/selftests/arm64/fp/ssve-stress | 59 ++ tools/testing/selftests/arm64/fp/sve-ptrace.c | 13 +- tools/testing/selftests/arm64/fp/sve-test.S | 20 + tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 + tools/testing/selftests/arm64/fp/vlset.c | 10 +- tools/testing/selftests/arm64/fp/za-ptrace.c | 354 +++++++++++ tools/testing/selftests/arm64/fp/za-stress | 59 ++ tools/testing/selftests/arm64/fp/za-test.S | 388 ++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 3 + .../selftests/arm64/signal/test_signals.h | 5 + .../arm64/signal/test_signals_utils.c | 40 +- .../arm64/signal/test_signals_utils.h | 2 + .../testcases/fake_sigreturn_sme_change_vl.c | 92 +++ .../arm64/signal/testcases/sme_trap_no_sm.c | 38 ++ .../signal/testcases/sme_trap_non_streaming.c | 45 ++ .../arm64/signal/testcases/sme_trap_za.c | 36 ++ .../selftests/arm64/signal/testcases/sme_vl.c | 68 +++ .../arm64/signal/testcases/ssve_regs.c | 133 +++++ .../arm64/signal/testcases/testcases.c | 36 ++ .../arm64/signal/testcases/testcases.h | 3 +- .../arm64/signal/testcases/za_regs.c | 128 ++++ 73 files changed, 4711 insertions(+), 250 deletions(-) create mode 100644 Documentation/arm64/sme.rst create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.h create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c create mode 100644 tools/testing/selftests/arm64/fp/sme-inst.h create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/za-stress create mode 100644 tools/testing/selftests/arm64/fp/za-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_no_sm.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_non_streaming.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/za_regs.c base-commit: dfd42facf1e4ada021b939b4e19c935dcdd55566 -- 2.30.2

2 years, 4 months

5
56
0 0

[PATCH v9 0/6] test_sysfs: add new selftest for sysfs

by Luis Chamberlain

On this v9 I've dropped the generic sysfs deadlock fix given Ming Lei has provided alternative fixes for the zram driver without incurring a generic lock *and* we don't yet have full assessment of how wide spread the deadlock case might be in the kernel. A full assessment effort is still underway using Coccinelle with iteration support, however that effort will take a bit more time to complete. We can re-evaluate the value of a generic fix later after the assessment is complete. This series now just adds the test_sysfs selftest and failure injection support for it on kernfs. The most valuable tests are those which confirm that once a kernfs active reference is obtained with kernfs_get_active() the pointers used there are still valid, and so using sysfs ops *are* safe if we race against module removal. Likewise it also confirms how module removal will *wait* for these ops to complete if a kernfs node is already active. This v9 series also addresses feedback mostly provided by Kees Cook and Greg. I also made a few changes to the test_sysfs driver to account for changes in the block layer. I also improved the kernfs failure injection tests with documentation of how they work and to account for the real expected return value of a write before the kernfs active reference is obtained. Upstream commit 8e141f9eb803e ("block: drain file system I/O on del_gendisk") has revealed that small minor induced delays on del_gendisk() can make a few writes succeed if the delays used are small. So we clarify the logic of why writes could either fail or succeed before the kernfs active reference is taken. These changes also availble on this tree: https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux-next.git/log/?… v9: * rebased onto linux-next tag next-20211029 * add Reviewed-by tags for the SPDX change, and the drivers which get the tag for it * drop the generic sysfs deadlock fix for now as the scope of how wide spread the issue is still needs to be assessed * drop the zram patches as they are replaced by Ming Lei's fixes * drop already merged patches * try_module_get() docs: enhanced using feedback from Kees Cook. I extended the documention to make it clear that if proper care is not taken the use of this routine could crash the kernel. * kernfs: move failure injection knobs under /sys/kernel/debug/fail_kernfs as suggested by Kees Cook * kernfs: rename failure injection file to fault_inject.c as suggested by Kees Cook * kernfs: split up documentation of failure injection knobs as suggested by Kees Cook * kernfs: move the wait into debug call, and use a simple one liner may_wait() calls to make the changes much less intrusive and more readable as suggested by Kees Cook * kernfs: drop __func__ uses as suggested by Kees Cook * test_sysfs: use sizeof() instead of open coded 16 as suggested by Kees Cook * test_sysfs: use sysfs_emit as suggested by Kees Cook * test_sysfs: drop boiler place license as suggested by Greg KH * test_sysfs: use depends instead of select as suggested by Kees Cook * test_sysfs: drop #ifdefery as suggested by Kees Cook * test_sysfs: clarified that the use of a lock on rmmod which causes a deadlock is something drivers should avoid, and its why we leave the test disabled. * test_sysfs: now that device_add_disk() returns an error, use the new error return code, otherwise this is going to prevent us from eventually embracing __must_check() on that call on the block layer. * test_syfs: testdev_submit_bio() needed to change data types as now it returns void. * test_sysfs: enhance kernfs failure injection tests with documenation and correct the expected return value for writes Luis Chamberlain (6): LICENSES: Add the copyleft-next-0.3.1 license testing: use the copyleft-next-0.3.1 SPDX tag selftests: add tests_sysfs module kernfs: add initial failure injection support test_sysfs: add support to use kernfs failure injection kernel/module: add documentation for try_module_get() .../fault-injection/fault-injection.rst | 50 + LICENSES/dual/copyleft-next-0.3.1 | 237 +++ MAINTAINERS | 9 +- fs/kernfs/Makefile | 1 + fs/kernfs/fault_inject.c | 93 ++ fs/kernfs/file.c | 9 + fs/kernfs/kernfs-internal.h | 70 + include/linux/kernfs.h | 5 + include/linux/module.h | 37 +- lib/Kconfig.debug | 23 + lib/Makefile | 1 + lib/test_kmod.c | 12 +- lib/test_sysctl.c | 12 +- lib/test_sysfs.c | 913 +++++++++++ tools/testing/selftests/kmod/kmod.sh | 13 +- tools/testing/selftests/sysctl/sysctl.sh | 12 +- tools/testing/selftests/sysfs/Makefile | 12 + tools/testing/selftests/sysfs/config | 5 + tools/testing/selftests/sysfs/settings | 1 + tools/testing/selftests/sysfs/sysfs.sh | 1411 +++++++++++++++++ 20 files changed, 2878 insertions(+), 48 deletions(-) create mode 100644 LICENSES/dual/copyleft-next-0.3.1 create mode 100644 fs/kernfs/fault_inject.c create mode 100644 lib/test_sysfs.c create mode 100644 tools/testing/selftests/sysfs/Makefile create mode 100644 tools/testing/selftests/sysfs/config create mode 100644 tools/testing/selftests/sysfs/settings create mode 100755 tools/testing/selftests/sysfs/sysfs.sh -- 2.30.2

2 years, 4 months

9
35
0 0

[PATCH v3 0/4] KVM: s390: selftests: Provide TAP output in tests

by Thomas Huth

This patch series is motivated by Shuah's suggestion here: https://lore.kernel.org/kvm/d576d8f7-980f-3bc6-87ad-5a6ae45609b8@linuxfound… Many s390x KVM selftests do not output any information about which tests have been run, so it's hard to say whether a test binary contains a certain sub-test or not. To improve this situation let's add some TAP output via the kselftest.h interface to these tests, so that it easier to understand what has been executed or not. v3: - Added comments / fixed cosmetics according to Janosch's and Janis' reviews of the v2 series - Added Reviewed-by tags from the v2 series v2: - Reworked the extension checking in the first patch - Make sure to always print the TAP 13 header in the second patch - Reworked the SKIP printing in the third patch Thomas Huth (4): KVM: s390: selftests: Use TAP interface in the memop test KVM: s390: selftests: Use TAP interface in the sync_regs test KVM: s390: selftests: Use TAP interface in the tprot test KVM: s390: selftests: Use TAP interface in the reset test tools/testing/selftests/kvm/s390x/memop.c | 90 +++++++++++++++---- tools/testing/selftests/kvm/s390x/resets.c | 38 ++++++-- .../selftests/kvm/s390x/sync_regs_test.c | 87 +++++++++++++----- tools/testing/selftests/kvm/s390x/tprot.c | 29 ++++-- 4 files changed, 193 insertions(+), 51 deletions(-) -- 2.27.0

2 years, 4 months

2
6
0 0

[PATCH RESEND] selftests/damon: add damon to selftests root Makefile

by Yuanchu Xie

Currently the damon selftests are not built with the rest of the selftests. We add damon to the list of targets. Fixes: b348eb7abd09 ("mm/damon: add user space selftests") Reviewed-by: SeongJae Park <sj(a)kernel.org> Signed-off-by: Yuanchu Xie <yuanchu(a)google.com> --- tools/testing/selftests/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index d08fe4cfe811..ffe453760a12 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -9,6 +9,7 @@ TARGETS += clone3 TARGETS += core TARGETS += cpufreq TARGETS += cpu-hotplug +TARGETS += damon TARGETS += drivers/dma-buf TARGETS += efivarfs TARGETS += exec -- 2.35.1.265.g69c8d7142f-goog

2 years, 4 months

4
15
0 0

[PATCH] selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"

by Colin Ian King

There are a few spelling mistakes in error messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/powerpc/security/spectre_v2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/powerpc/security/spectre_v2.c b/tools/testing/selftests/powerpc/security/spectre_v2.c index d42ca8c676c3..e832605442bb 100644 --- a/tools/testing/selftests/powerpc/security/spectre_v2.c +++ b/tools/testing/selftests/powerpc/security/spectre_v2.c @@ -183,7 +183,7 @@ int spectre_v2_test(void) // These should all not affect userspace branch prediction if (miss_percent > 15) { printf("Branch misses > 15%% unexpected in this configuration!\n"); - printf("Possible mis-match between reported & actual mitigation\n"); + printf("Possible mismatch between reported & actual mitigation\n"); /* * Such a mismatch may be caused by a guest system * reporting as vulnerable when the host is mitigated. @@ -201,14 +201,14 @@ int spectre_v2_test(void) // This seems to affect userspace branch prediction a bit? if (miss_percent > 25) { printf("Branch misses > 25%% unexpected in this configuration!\n"); - printf("Possible mis-match between reported & actual mitigation\n"); + printf("Possible mismatch between reported & actual mitigation\n"); return 1; } break; case COUNT_CACHE_DISABLED: if (miss_percent < 95) { printf("Branch misses < 20%% unexpected in this configuration!\n"); - printf("Possible mis-match between reported & actual mitigation\n"); + printf("Possible mismatch between reported & actual mitigation\n"); return 1; } break; -- 2.35.1

2 years, 4 months

2
1
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror April 2022