November 2022 - Linux-kselftest-mirror

[PATCH net-next v2 0/3] net: introduce rps_default_mask

by Paolo Abeni

Real-time setups try hard to ensure proper isolation between time critical applications and e.g. network processing performed by the network stack in softirq and RPS is used to move the softirq activity away from the isolated core. If the network configuration is dynamic, with netns and devices routinely created at run-time, enforcing the correct RPS setting on each newly created device allowing to transient bad configuration became complex. These series try to address the above, introducing a new sysctl knob: rps_default_mask. The new sysctl entry allows configuring a systemwide RPS mask, to be enforced since receive queue creation time without any fourther per device configuration required. Additionally, a simple self-test is introduced to check the rps_default_mask behavior. v1 -> v2: - fix sparse warning in patch 2/3 Paolo Abeni (3): net/sysctl: factor-out netdev_rx_queue_set_rps_mask() helper net/core: introduce default_rps_mask netns attribute self-tests: introduce self-tests for RPS default mask Documentation/admin-guide/sysctl/net.rst | 6 ++ include/linux/netdevice.h | 1 + net/core/net-sysfs.c | 73 +++++++++++-------- net/core/sysctl_net_core.c | 58 +++++++++++++++ tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 3 + .../testing/selftests/net/rps_default_mask.sh | 57 +++++++++++++++ 7 files changed, 169 insertions(+), 30 deletions(-) create mode 100755 tools/testing/selftests/net/rps_default_mask.sh -- 2.26.2

1 year, 8 months

4
12
0 0

[PATCH v4 00/17] IOMMUFD Generic interface

by Jason Gunthorpe

[ This has been in linux-next for a little while now, and we've completed the syzkaller run. 1300 hours of CPU time have been invested since the last report with no improvement in coverage or new detections. syzkaller coverage reached 69%(75%), and review of the misses show substantial amounts are WARN_ON's and other debugging which are not expected to be covered. ] iommufd is the user API to control the IOMMU subsystem as it relates to managing IO page tables that point at user space memory. It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO container) which is the VFIO specific interface for a similar idea. We see a broad need for extended features, some being highly IOMMU device specific: - Binding iommu_domain's to PASID/SSID - Userspace IO page tables, for ARM, x86 and S390 - Kernel bypassed invalidation of user page tables - Re-use of the KVM page table in the IOMMU - Dirty page tracking in the IOMMU - Runtime Increase/Decrease of IOPTE size - PRI support with faults resolved in userspace Many of these HW features exist to support VM use cases - for instance the combination of PASID, PRI and Userspace IO Page Tables allows an implementation of DMA Shared Virtual Addressing (vSVA) within a guest. Dirty tracking enables VM live migration with SRIOV devices and PASID support allow creating "scalable IOV" devices, among other things. As these features are fundamental to a VM platform they need to be uniformly exposed to all the driver families that do DMA into VMs, which is currently VFIO and VDPA. The pre-v1 series proposed re-using the VFIO type 1 data structure, however it was suggested that if we are doing this big update then we should also come with an improved data structure that solves the limitations that VFIO type1 has. Notably this addresses: - Multiple IOAS/'containers' and multiple domains inside a single FD - Single-pin operation no matter how many domains and containers use a page - A fine grained locking scheme supporting user managed concurrency for multi-threaded map/unmap - A pre-registration mechanism to optimize vIOMMU use cases by pre-pinning pages - Extended ioctl API that can manage these new objects and exposes domains directly to user space - domains are sharable between subsystems, eg VFIO and VDPA The bulk of this code is a new data structure design to track how the IOVAs are mapped to PFNs. iommufd intends to be general and consumable by any driver that wants to DMA to userspace. From a driver perspective it can largely be dropped in in-place of iommu_attach_device() and provides a uniform full feature set to all consumers. As this is a larger project this series is the first step. This series provides the iommfd "generic interface" which is designed to be suitable for applications like DPDK and VMM flows that are not optimized to specific HW scenarios. It is close to being a drop in replacement for the existing VFIO type 1 and supports existing qemu based VM flows. Several follow-on series are being prepared: - Patches integrating with qemu in native mode: https://github.com/yiliu1765/qemu/commits/qemu-iommufd-6.0-rc2 - A completed integration with VFIO now exists that covers "emulated" mdev use cases now, and can pass testing with qemu/etc in compatability mode: https://github.com/jgunthorpe/linux/commits/vfio_iommufd - A draft providing system iommu dirty tracking on top of iommufd, including iommu driver implementations: https://github.com/jpemartins/linux/commits/x86-iommufd This pairs with patches for providing a similar API to support VFIO-device tracking to give a complete vfio solution: https://lore.kernel.org/kvm/20220901093853.60194-1-yishaih@nvidia.com/ - Userspace page tables aka 'nested translation' for ARM and Intel iommu drivers: https://github.com/nicolinc/iommufd/commits/iommufd_nesting - "device centric" vfio series to expose the vfio_device FD directly as a normal cdev, and provide an extended API allowing dynamically changing the IOAS binding: https://github.com/yiliu1765/iommufd/commits/iommufd-v6.0-rc2-nesting-0901 - Drafts for PASID and PRI interfaces are included above as well Overall enough work is done now to show the merit of the new API design and at least draft solutions to many of the main problems. Several people have contributed directly to this work: Eric Auger, Joao Martins, Kevin Tian, Lu Baolu, Nicolin Chen, Yi L Liu. Many more have participated in the discussions that lead here, and provided ideas. Thanks to all! The v1/v2 iommufd series has been used to guide a large amount of preparatory work that has now been merged. The general theme is to organize things in a way that makes injecting iommufd natural: - VFIO live migration support with mlx5 and hisi_acc drivers. These series need a dirty tracking solution to be really usable. https://lore.kernel.org/kvm/20220224142024.147653-1-yishaih@nvidia.com/ https://lore.kernel.org/kvm/20220308184902.2242-1-shameerali.kolothum.thodi… - Significantly rework the VFIO gvt mdev and remove struct mdev_parent_ops https://lore.kernel.org/lkml/20220411141403.86980-1-hch@lst.de/ - Rework how PCIe no-snoop blocking works https://lore.kernel.org/kvm/0-v3-2cf356649677+a32-intel_no_snoop_jgg@nvidia… - Consolidate dma ownership into the iommu core code https://lore.kernel.org/linux-iommu/20220418005000.897664-1-baolu.lu@linux.… - Make all vfio driver interfaces use struct vfio_device consistently https://lore.kernel.org/kvm/0-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nv… - Remove the vfio_group from the kvm/vfio interface https://lore.kernel.org/kvm/0-v3-f7729924a7ea+25e33-vfio_kvm_no_group_jgg@n… - Simplify locking in vfio https://lore.kernel.org/kvm/0-v2-d035a1842d81+1bf-vfio_group_locking_jgg@nv… - Remove the vfio notifiter scheme that faces drivers https://lore.kernel.org/kvm/0-v4-681e038e30fd+78-vfio_unmap_notif_jgg@nvidi… - Improve the driver facing API for vfio pin/unpin pages to make the presence of struct page clear https://lore.kernel.org/kvm/20220723020256.30081-1-nicolinc@nvidia.com/ - Clean up in the Intel IOMMU driver https://lore.kernel.org/linux-iommu/20220301020159.633356-1-baolu.lu@linux.… https://lore.kernel.org/linux-iommu/20220510023407.2759143-1-baolu.lu@linux… https://lore.kernel.org/linux-iommu/20220514014322.2927339-1-baolu.lu@linux… https://lore.kernel.org/linux-iommu/20220706025524.2904370-1-baolu.lu@linux… https://lore.kernel.org/linux-iommu/20220702015610.2849494-1-baolu.lu@linux… - Rework s390 vfio drivers https://lore.kernel.org/kvm/20220707135737.720765-1-farman@linux.ibm.com/ - Normalize vfio ioctl handling https://lore.kernel.org/kvm/0-v2-0f9e632d54fb+d6-vfio_ioctl_split_jgg@nvidi… - VFIO API for dirty tracking (aka dma logging) managed inside a PCI device, with mlx5 implementation https://lore.kernel.org/kvm/20220901093853.60194-1-yishaih@nvidia.com - Introduce a struct device sysfs presence for struct vfio_device https://lore.kernel.org/kvm/20220901143747.32858-1-kevin.tian@intel.com/ - Complete restructuring the vfio mdev model https://lore.kernel.org/kvm/20220822062208.152745-1-hch@lst.de/ - Isolate VFIO container code in preperation for iommufd to provide an alternative implementation of it all https://lore.kernel.org/kvm/0-v1-a805b607f1fb+17b-vfio_container_split_jgg@… - Simplify and consolidate iommu_domain/device compatability checking https://lore.kernel.org/linux-iommu/cover.1666042872.git.nicolinc@nvidia.co… - Align iommu SVA support with the domain-centric model https://lore.kernel.org/all/20221031005917.45690-1-baolu.lu@linux.intel.com/ This is about 233 patches applied since March, thank you to everyone involved in all this work! Currently there are a number of supporting series still in progress: - DMABUF exporter support for VFIO to allow PCI P2P with VFIO https://lore.kernel.org/r/0-v2-472615b3877e+28f7-vfio_dma_buf_jgg@nvidia.com - Start to provide iommu_domain ops for POWER https://lore.kernel.org/all/20220714081822.3717693-1-aik@ozlabs.ru/ However, these are not necessary for this series to advance. This is on github: https://github.com/jgunthorpe/linux/commits/iommufd v4: - Rebase to v6.1-rc3, include the iommu branch with the needed EINVAL patch series and also the SVA rework - All bug fixes and comments with no API or behavioral changes - gvt tests are passing again - Syzkaller is no longer finding issues and achieved high coverage of 69%(75%) - Coverity has been run by two people - new "nth failure" test that systematically sweeps all error unwind paths looking for splats - All fixes noted in the mailing list If you sent an email and I didn't reply please ping it, I have lost it. - The selftest patch has been broken into three to make the additional modification to the main code clearer - The interdiff is 1.8k lines for the main code, with another 3k of test suite changes v3: https://lore.kernel.org/r/0-v3-402a7d6459de+24b-iommufd_jgg@nvidia.com - Rebase to v6.1-rc1 - Improve documentation - Use EXPORT_SYMBOL_NS - Fix W1, checkpatch stuff - Revise pages.c to resolve the FIXMEs. Create a interval_tree_double_span_iter which allows a simple expression of the previously problematic algorithms - Consistently use the word 'access' instead of user to refer to an access from an in-kernel user (eg vfio mdev) - Support two forms of rlimit accounting and make the vfio compatible one the default in compatability mode (following series) - Support old VFIO type1 by disabling huge pages and implementing a simple algorithm to split a struct iopt_area - Full implementation of access support, test coverage and optimizations - Complete COPY to be able to copy across contiguous areas. Improve all the algorithms around contiguous areas with a dedicated iterator - Functional ENFORCED_COHERENT support - Support multi-device groups - Lots of smaller changes (the interdiff is 5k lines) v2: https://lore.kernel.org/r/0-v2-f9436d0bde78+4bb-iommufd_jgg@nvidia.com - Rebase to v6.0-rc3 - Improve comments - Change to an iterative destruction approach to avoid cycles - Near rewrite of the vfio facing implementation, supported by a complete implementation on the vfio side - New IOMMU_IOAS_ALLOW_IOVAS API as discussed. Allows userspace to assert that ranges of IOVA must always be mappable. To be used by a VMM that has promised a guest a certain availability of IOVA. May help guide PPC's multi-window implementation. - Rework how unmap_iova works, user can unmap the whole ioas now - The no-snoop / wbinvd support is implemented - Bug fixes - Test suite improvements - Lots of smaller changes (the interdiff is 3k lines) v1: https://lore.kernel.org/r/0-v1-e79cd8d168e8+6-iommufd_jgg@nvidia.com Jason Gunthorpe (15): iommu: Add IOMMU_CAP_ENFORCE_CACHE_COHERENCY interval-tree: Add a utility to iterate over spans in an interval tree iommufd: File descriptor, context, kconfig and makefiles kernel/user: Allow user::locked_vm to be usable for iommufd iommufd: PFN handling for iopt_pages iommufd: Algorithms for PFN storage iommufd: Data structure to provide IOVA to PFN mapping iommufd: IOCTLs for the io_pagetable iommufd: Add a HW pagetable object iommufd: Add kAPI toward external drivers for physical devices iommufd: Add kAPI toward external drivers for kernel access iommufd: vfio container FD ioctl compatibility iommufd: Add a selftest iommufd: Add some fault injection points iommufd: Add additional invariant assertions Kevin Tian (1): iommufd: Document overview of iommufd Lu Baolu (1): iommu: Add device-centric DMA ownership interfaces .clang-format | 3 + Documentation/userspace-api/index.rst | 1 + .../userspace-api/ioctl/ioctl-number.rst | 1 + Documentation/userspace-api/iommufd.rst | 222 ++ MAINTAINERS | 12 + drivers/iommu/Kconfig | 1 + drivers/iommu/Makefile | 2 +- drivers/iommu/amd/iommu.c | 2 + drivers/iommu/intel/iommu.c | 16 +- drivers/iommu/iommu.c | 124 +- drivers/iommu/iommufd/Kconfig | 23 + drivers/iommu/iommufd/Makefile | 13 + drivers/iommu/iommufd/device.c | 748 +++++++ drivers/iommu/iommufd/double_span.h | 98 + drivers/iommu/iommufd/hw_pagetable.c | 57 + drivers/iommu/iommufd/io_pagetable.c | 1214 +++++++++++ drivers/iommu/iommufd/io_pagetable.h | 241 +++ drivers/iommu/iommufd/ioas.c | 390 ++++ drivers/iommu/iommufd/iommufd_private.h | 307 +++ drivers/iommu/iommufd/iommufd_test.h | 93 + drivers/iommu/iommufd/main.c | 419 ++++ drivers/iommu/iommufd/pages.c | 1884 +++++++++++++++++ drivers/iommu/iommufd/selftest.c | 853 ++++++++ drivers/iommu/iommufd/vfio_compat.c | 452 ++++ include/linux/interval_tree.h | 58 + include/linux/iommu.h | 17 + include/linux/iommufd.h | 102 + include/linux/sched/user.h | 2 +- include/uapi/linux/iommufd.h | 332 +++ kernel/user.c | 1 + lib/Kconfig | 4 + lib/interval_tree.c | 132 ++ tools/testing/selftests/Makefile | 1 + tools/testing/selftests/iommu/.gitignore | 3 + tools/testing/selftests/iommu/Makefile | 12 + tools/testing/selftests/iommu/config | 2 + tools/testing/selftests/iommu/iommufd.c | 1627 ++++++++++++++ .../selftests/iommu/iommufd_fail_nth.c | 580 +++++ tools/testing/selftests/iommu/iommufd_utils.h | 278 +++ 39 files changed, 10294 insertions(+), 33 deletions(-) create mode 100644 Documentation/userspace-api/iommufd.rst create mode 100644 drivers/iommu/iommufd/Kconfig create mode 100644 drivers/iommu/iommufd/Makefile create mode 100644 drivers/iommu/iommufd/device.c create mode 100644 drivers/iommu/iommufd/double_span.h create mode 100644 drivers/iommu/iommufd/hw_pagetable.c create mode 100644 drivers/iommu/iommufd/io_pagetable.c create mode 100644 drivers/iommu/iommufd/io_pagetable.h create mode 100644 drivers/iommu/iommufd/ioas.c create mode 100644 drivers/iommu/iommufd/iommufd_private.h create mode 100644 drivers/iommu/iommufd/iommufd_test.h create mode 100644 drivers/iommu/iommufd/main.c create mode 100644 drivers/iommu/iommufd/pages.c create mode 100644 drivers/iommu/iommufd/selftest.c create mode 100644 drivers/iommu/iommufd/vfio_compat.c create mode 100644 include/linux/iommufd.h create mode 100644 include/uapi/linux/iommufd.h create mode 100644 tools/testing/selftests/iommu/.gitignore create mode 100644 tools/testing/selftests/iommu/Makefile create mode 100644 tools/testing/selftests/iommu/config create mode 100644 tools/testing/selftests/iommu/iommufd.c create mode 100644 tools/testing/selftests/iommu/iommufd_fail_nth.c create mode 100644 tools/testing/selftests/iommu/iommufd_utils.h base-commit: 69e61edebea030f177de7a23b8d5d9b8c4a90bda -- 2.38.1

1 year, 9 months

9
73
0 0

[PATCH v3 00/21] arm64/sme: Support SME 2 and SME 2.1

by Mark Brown

Arm have recently released versions 2 and 2.1 of the SME extension. Among the features introduced by SME 2 is some new architectural state, the ZT0 register. This series adds support for this and all the other features of the new SME versions. Since the architecture has been designed with the possibility of adding further ZTn registers in mind the interfaces added for ZT0 are done with this possibility in mind. As ZT0 is a simple fixed size register these interfaces are all fairly simple, the main complication is that ZT0 is only accessible when PSTATE.ZA is enabled. The memory allocation that we already do for PSTATE.ZA is extended to include space for ZT0. Due to textual collisions especially around the addition of hwcaps this is based on the recently merged series "arm64: Support for 2022 data processing instructions" but there is no meaningful interaction. v3: - Rebase onto merged series for the 2022 architectur extensions. - Clarifications and typo fixes in the ABI documentation. v2: - Add missing initialisation of user->zt in signal context parsing. - Change the magic for ZT signal frames to 0x5a544e01 (ZTN0). Mark Brown (21): arm64/sme: Rename za_state to sme_state arm64: Document boot requirements for SME 2 arm64/sysreg: Update system registers for SME 2 and 2.1 arm64/sme: Document SME 2 and SME 2.1 ABI arm64/esr: Document ISS for ZT0 being disabled arm64/sme: Manually encode ZT0 load and store instructions arm64/sme: Enable host kernel to access ZT0 arm64/sme: Add basic enumeration for SME2 arm64/sme: Provide storage for ZT0 arm64/sme: Implement context switching for ZT0 arm64/sme: Implement signal handling for ZT arm64/sme: Implement ZT0 ptrace support arm64/sme: Add hwcaps for SME 2 and 2.1 features kselftest/arm64: Add a stress test program for ZT0 kselftest/arm64: Cover ZT in the FP stress test kselftest/arm64: Enumerate SME2 in the signal test utility code kselftest/arm64: Teach the generic signal context validation about ZT kselftest/arm64: Add test coverage for ZT register signal frames kselftest/arm64: Add SME2 coverage to syscall-abi kselftest/arm64: Add coverage of the ZT ptrace regset kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps Documentation/arm64/booting.rst | 10 + Documentation/arm64/elf_hwcaps.rst | 18 + Documentation/arm64/sme.rst | 52 ++- arch/arm64/include/asm/cpufeature.h | 6 + arch/arm64/include/asm/esr.h | 1 + arch/arm64/include/asm/fpsimd.h | 28 +- arch/arm64/include/asm/fpsimdmacros.h | 22 ++ arch/arm64/include/asm/hwcap.h | 6 + arch/arm64/include/asm/processor.h | 2 +- arch/arm64/include/uapi/asm/hwcap.h | 6 + arch/arm64/include/uapi/asm/sigcontext.h | 19 + arch/arm64/kernel/cpufeature.c | 27 ++ arch/arm64/kernel/cpuinfo.c | 6 + arch/arm64/kernel/entry-fpsimd.S | 30 +- arch/arm64/kernel/fpsimd.c | 53 ++- arch/arm64/kernel/hyp-stub.S | 6 + arch/arm64/kernel/idreg-override.c | 1 + arch/arm64/kernel/process.c | 21 +- arch/arm64/kernel/ptrace.c | 60 ++- arch/arm64/kernel/signal.c | 113 +++++- arch/arm64/tools/cpucaps | 1 + arch/arm64/tools/sysreg | 26 +- include/uapi/linux/elf.h | 1 + tools/testing/selftests/arm64/abi/hwcap.c | 115 ++++++ .../selftests/arm64/abi/syscall-abi-asm.S | 43 ++- .../testing/selftests/arm64/abi/syscall-abi.c | 40 +- tools/testing/selftests/arm64/fp/.gitignore | 2 + tools/testing/selftests/arm64/fp/Makefile | 5 + tools/testing/selftests/arm64/fp/fp-stress.c | 29 +- tools/testing/selftests/arm64/fp/sme-inst.h | 20 + tools/testing/selftests/arm64/fp/zt-ptrace.c | 365 ++++++++++++++++++ tools/testing/selftests/arm64/fp/zt-test.S | 324 ++++++++++++++++ .../testing/selftests/arm64/signal/.gitignore | 1 + .../selftests/arm64/signal/test_signals.h | 2 + .../arm64/signal/test_signals_utils.c | 3 + .../arm64/signal/testcases/testcases.c | 36 ++ .../arm64/signal/testcases/testcases.h | 1 + .../arm64/signal/testcases/zt_no_regs.c | 51 +++ .../arm64/signal/testcases/zt_regs.c | 85 ++++ 39 files changed, 1564 insertions(+), 73 deletions(-) create mode 100644 tools/testing/selftests/arm64/fp/zt-ptrace.c create mode 100644 tools/testing/selftests/arm64/fp/zt-test.S create mode 100644 tools/testing/selftests/arm64/signal/testcases/zt_no_regs.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/zt_regs.c base-commit: c5195b027d29bbaae0c9668704ab996773788d23 -- 2.30.2

1 year, 10 months

2
27
0 0

[PATCH v2 0/2] bpftool: improve error handing for missing .BTF section

by Changbin Du

v2: - remove vmlinux specific error info. - use builtin target .DELETE_ON_ERROR: to delete empty vmlinux.h Changbin Du (2): libbpf: show error info about missing ".BTF" section bpf: makefiles: do not generate empty vmlinux.h tools/bpf/bpftool/Makefile | 3 +++ tools/lib/bpf/btf.c | 1 + tools/perf/Makefile.perf | 2 ++ tools/testing/selftests/bpf/Makefile | 3 +++ 4 files changed, 9 insertions(+) -- 2.37.2

1 year, 10 months

2
7
0 0

[PATCH v4 0/5] Some improvements of resctrl selftest

by Shaopeng Tan

Hello, The aim of this patch series is to improve the resctrl selftest. Without these fixes, some unnecessary processing will be executed and test results will be confusing. There is no behavior change in test themselves. [patch 1] Make write_schemata() run to set up shemata with 100% allocation on first run in MBM test. [patch 2] The MBA test result message is always output as "ok", make output message to be "not ok" if MBA check result is failed. [patch 3] When a child process is created by fork(), the buffer of the parent process is also copied. Flush the buffer before executing fork(). [patch 4] Add a signal handler to cleanup properly before exiting the parent process if there is an error occurs after creating a child process with fork() in the CAT test. [patch 5] Before exiting each test CMT/CAT/MBM/MBA, clear test result files function cat/cmt/mbm/mba_test_cleanup() are called twice. Delete once. This patch series is based on Linux v6.1-rc5 Difference from v3: [patch 2] Rename "failed" to "ret" to avoid confusion. [patch 4] - Use sigaction(2) instead of signal(). - Add a description of using global bm_pid in commit message. - Add comments to clarify why let the child continue to its infinite loop after the write() failed. [patch 5] Ensure to run cat/cmt/mbm/mba_test_cleanup() to clear test result file before return if an error occurs. Pervious versions of this series: [v1] https://lore.kernel.org/lkml/20220914015147.3071025-1-tan.shaopeng@jp.fujit… [v2] https://lore.kernel.org/lkml/20221005013933.1486054-1-tan.shaopeng@jp.fujit… [v3] https://lore.kernel.org/lkml/20221101094341.3383073-1-tan.shaopeng@jp.fujit… Shaopeng Tan (5): selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test selftests/resctrl: Return MBA check result and make it to output message selftests/resctrl: Flush stdout file buffer before executing fork() selftests/resctrl: Cleanup properly when an error occurs in CAT test selftests/resctrl: Remove duplicate codes that clear each test result file tools/testing/selftests/resctrl/cat_test.c | 31 +++++++++++++------ tools/testing/selftests/resctrl/cmt_test.c | 7 ++--- tools/testing/selftests/resctrl/mba_test.c | 23 +++++++------- tools/testing/selftests/resctrl/mbm_test.c | 20 ++++++------ .../testing/selftests/resctrl/resctrl_tests.c | 4 --- tools/testing/selftests/resctrl/resctrl_val.c | 1 + tools/testing/selftests/resctrl/resctrlfs.c | 5 ++- 7 files changed, 50 insertions(+), 41 deletions(-) -- 2.27.0

1 year, 10 months

3
15
0 0

[PATCH v6 0/3] Implement IOCTL to get and/or the clear info about PTEs

by Muhammad Usama Anjum

Changes in v6: - Updated the interface and made cosmetic changes Original Cover Letter in v5: Hello, This patch series implements IOCTL on the pagemap procfs file to get the information about the page table entries (PTEs). The following operations are supported in this ioctl: - Get the information if the pages are soft-dirty, file mapped, present or swapped. - Clear the soft-dirty PTE bit of the pages. - Get and clear the soft-dirty PTE bit of the pages atomically. Soft-dirty PTE bit of the memory pages can be read by using the pagemap procfs file. The soft-dirty PTE bit for the whole memory range of the process can be cleared by writing to the clear_refs file. There are other methods to mimic this information entirely in userspace with poor performance: - The mprotect syscall and SIGSEGV handler for bookkeeping - The userfaultfd syscall with the handler for bookkeeping Some benchmarks can be seen here[1]. This series adds features that weren't present earlier: - There is no atomic get soft-dirty PTE bit status and clear operation possible. - The soft-dirty PTE bit of only a part of memory cannot be cleared. Historically, soft-dirty PTE bit tracking has been used in the CRIU project. The procfs interface is enough for finding the soft-dirty bit status and clearing the soft-dirty bit of all the pages of a process. We have the use case where we need to track the soft-dirty PTE bit for only specific pages on demand. We need this tracking and clear mechanism of a region of memory while the process is running to emulate the getWriteWatch() syscall of Windows. This syscall is used by games to keep track of dirty pages to process only the dirty pages. The information related to pages if the page is file mapped, present and swapped is required for the CRIU project[2][3]. The addition of the required mask, any mask, excluded mask and return masks are also required for the CRIU project[2]. The IOCTL returns the addresses of the pages which match the specific masks. The page addresses are returned in struct page_region in a compact form. The max_pages is needed to support a use case where user only wants to get a specific number of pages. So there is no need to find all the pages of interest in the range when max_pages is specified. The IOCTL returns when the maximum number of the pages are found. The max_pages is optional. If max_pages is specified, it must be equal or greater than the vec_size. This restriction is needed to handle worse case when one page_region only contains info of one page and it cannot be compacted. This is needed to emulate the Windows getWriteWatch() syscall. Some non-dirty pages get marked as dirty because of the kernel's internal activity (such as VMA merging as soft-dirty bit difference isn't considered while deciding to merge VMAs). The dirty bit of the pages is stored in the VMA flags and in the per page flags. If any of these two bits are set, the page is considered to be soft dirty. Suppose you have cleared the soft dirty bit of half of VMA which will be done by splitting the VMA and clearing soft dirty bit flag in the half VMA and the pages in it. Now kernel may decide to merge the VMAs again. So the half VMA becomes dirty again. This splitting/merging costs performance. The application receives a lot of pages which aren't dirty in reality but marked as dirty. Performance is lost again here. Also sometimes user doesn't want the newly allocated memory to be marked as dirty. PAGEMAP_NO_REUSED_REGIONS flag solves both the problems. It is used to not depend on the soft dirty flag in the VMA flags. So VMA splitting and merging doesn't happen. It only depends on the soft dirty bit of the individual pages. Thus by using this flag, there may be a scenerio such that the new memory regions which are just created, doesn't look dirty when seen with the IOCTL, but look dirty when seen from procfs. This seems okay as the user of this flag know the implication of using it. [1] https://lore.kernel.org/lkml/54d4c322-cd6e-eefd-b161-2af2b56aae24@collabora… [2] https://lore.kernel.org/all/YyiDg79flhWoMDZB@gmail.com/ [3] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com/ Regards, Muhammad Usama Anjum Muhammad Usama Anjum (3): fs/proc/task_mmu: update functions to clear the soft-dirty PTE bit fs/proc/task_mmu: Implement IOCTL to get and/or the clear info about PTEs selftests: vm: add pagemap ioctl tests fs/proc/task_mmu.c | 410 +++++++++++- include/uapi/linux/fs.h | 56 ++ tools/include/uapi/linux/fs.h | 56 ++ tools/testing/selftests/vm/.gitignore | 1 + tools/testing/selftests/vm/Makefile | 5 +- tools/testing/selftests/vm/pagemap_ioctl.c | 698 +++++++++++++++++++++ 6 files changed, 1193 insertions(+), 33 deletions(-) create mode 100644 tools/testing/selftests/vm/pagemap_ioctl.c -- 2.30.2

1 year, 10 months

5
18
0 0

[PATCH hid v12 00/15] Introduce eBPF support for HID devices

by Benjamin Tissoires

Hi, and here comes the v12 of the HID-BPF series. Again, for a full explanation of HID-BPF, please refer to the last patch in this series (15/15). This revision contains most notably few fixes from the various kernel CI bots. I also took Alexei's review into account, and we do not pollute tools/include with useless hid headers. I also removed most of the last checkpatch complains about adding external kfunc declarations in C files. And this led me to also show in samples/ how we can link together 2 BPF object files. Impressive how easy it is :) Cheers, Benjamin Benjamin Tissoires (15): HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is HID: Kconfig: split HID support and hid-core compilation HID: initial BPF implementation selftests: add tests for the HID-bpf initial implementation HID: bpf jmp table: simplify the logic of cleaning up programs HID: bpf: allocate data memory for device_event BPF programs selftests/hid: add test to change the report size HID: bpf: introduce hid_hw_request() selftests/hid: add tests for bpf_hid_hw_request HID: bpf: allow to change the report descriptor selftests/hid: add report descriptor fixup tests selftests/hid: Add a test for BPF_F_INSERT_HEAD samples/hid: add new hid BPF example samples/hid: add Surface Dial example Documentation: add HID-BPF docs Documentation/hid/hid-bpf.rst | 512 +++++++++++ Documentation/hid/index.rst | 1 + MAINTAINERS | 3 + drivers/Makefile | 2 +- drivers/hid/Kconfig | 18 +- drivers/hid/Makefile | 2 + drivers/hid/amd-sfh-hid/Kconfig | 2 +- drivers/hid/bpf/Kconfig | 17 + drivers/hid/bpf/Makefile | 11 + drivers/hid/bpf/entrypoints/Makefile | 93 ++ drivers/hid/bpf/entrypoints/README | 4 + drivers/hid/bpf/entrypoints/entrypoints.bpf.c | 34 + .../hid/bpf/entrypoints/entrypoints.lskel.h | 330 +++++++ drivers/hid/bpf/hid_bpf_dispatch.c | 531 +++++++++++ drivers/hid/bpf/hid_bpf_dispatch.h | 28 + drivers/hid/bpf/hid_bpf_jmp_table.c | 565 ++++++++++++ drivers/hid/hid-core.c | 34 +- drivers/hid/i2c-hid/Kconfig | 4 +- include/linux/hid.h | 5 + include/linux/hid_bpf.h | 163 ++++ samples/hid/.gitignore | 8 + samples/hid/Makefile | 250 ++++++ samples/hid/Makefile.target | 75 ++ samples/hid/hid_bpf_attach.bpf.c | 18 + samples/hid/hid_bpf_attach.h | 14 + samples/hid/hid_bpf_helpers.h | 21 + samples/hid/hid_mouse.bpf.c | 112 +++ samples/hid/hid_mouse.c | 155 ++++ samples/hid/hid_surface_dial.bpf.c | 134 +++ samples/hid/hid_surface_dial.c | 226 +++++ tools/testing/selftests/Makefile | 1 + tools/testing/selftests/hid/.gitignore | 4 + tools/testing/selftests/hid/Makefile | 233 +++++ tools/testing/selftests/hid/config | 20 + tools/testing/selftests/hid/hid_bpf.c | 845 ++++++++++++++++++ tools/testing/selftests/hid/progs/hid.c | 196 ++++ .../selftests/hid/progs/hid_bpf_helpers.h | 21 + 37 files changed, 4682 insertions(+), 10 deletions(-) create mode 100644 Documentation/hid/hid-bpf.rst create mode 100644 drivers/hid/bpf/Kconfig create mode 100644 drivers/hid/bpf/Makefile create mode 100644 drivers/hid/bpf/entrypoints/Makefile create mode 100644 drivers/hid/bpf/entrypoints/README create mode 100644 drivers/hid/bpf/entrypoints/entrypoints.bpf.c create mode 100644 drivers/hid/bpf/entrypoints/entrypoints.lskel.h create mode 100644 drivers/hid/bpf/hid_bpf_dispatch.c create mode 100644 drivers/hid/bpf/hid_bpf_dispatch.h create mode 100644 drivers/hid/bpf/hid_bpf_jmp_table.c create mode 100644 include/linux/hid_bpf.h create mode 100644 samples/hid/.gitignore create mode 100644 samples/hid/Makefile create mode 100644 samples/hid/Makefile.target create mode 100644 samples/hid/hid_bpf_attach.bpf.c create mode 100644 samples/hid/hid_bpf_attach.h create mode 100644 samples/hid/hid_bpf_helpers.h create mode 100644 samples/hid/hid_mouse.bpf.c create mode 100644 samples/hid/hid_mouse.c create mode 100644 samples/hid/hid_surface_dial.bpf.c create mode 100644 samples/hid/hid_surface_dial.c create mode 100644 tools/testing/selftests/hid/.gitignore create mode 100644 tools/testing/selftests/hid/Makefile create mode 100644 tools/testing/selftests/hid/config create mode 100644 tools/testing/selftests/hid/hid_bpf.c create mode 100644 tools/testing/selftests/hid/progs/hid.c create mode 100644 tools/testing/selftests/hid/progs/hid_bpf_helpers.h -- 2.36.1

1 year, 10 months

7
32
0 0

[V1 PATCH 0/6] selftests: KVM: selftests for fd-based private memory

by Vishal Annapurve

This series implements selftests targeting the feature floated by Chao via: https://lore.kernel.org/linux-mm/20221109041358.GA118963@chaop.bj.intel.com… Below changes aim to test the fd based approach for guest private memory in context of normal (non-confidential) VMs executing on non-confidential platforms. private_mem_test.c file adds selftest to access private memory from the guest via private/shared accesses and checking if the contents can be leaked to/accessed by vmm via shared memory view before/after conversions. Updates in V1 (Compared to RFC v3 patches): 1) Incorporated suggestions from Sean around simplifying KVM changes 2) Addressed comments from Sean 3) Added private mem test with shared memory backed by 2MB hugepages. RFC v3 series: https://lore.kernel.org/lkml/20220819174659.2427983-1-vannapurve@google.com… This series has dependency on following patches: 1) V9 series patches from Chao mentioned above. Github link for the patches posted as part of this series: https://github.com/vishals4gh/linux/commits/priv_memfd_selftests-v1 Vishal Annapurve (6): KVM: x86: Add support for testing private memory KVM: Selftests: Add support for private memory KVM: selftests: x86: Add IS_ALIGNED/IS_PAGE_ALIGNED helpers KVM: selftests: x86: Execute VMs with private memory KVM: selftests: Add get_free_huge_2m_pages KVM: selftests: x86: Add selftest for private memory arch/x86/kvm/mmu/mmu.c | 4 + arch/x86/kvm/mmu/mmu_internal.h | 4 +- tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 2 + .../selftests/kvm/include/kvm_util_base.h | 15 +- .../testing/selftests/kvm/include/test_util.h | 5 + .../kvm/include/x86_64/private_mem.h | 37 +++ .../selftests/kvm/include/x86_64/processor.h | 1 + tools/testing/selftests/kvm/lib/kvm_util.c | 58 ++++- tools/testing/selftests/kvm/lib/test_util.c | 30 +++ .../selftests/kvm/lib/x86_64/private_mem.c | 211 ++++++++++++++++++ .../selftests/kvm/x86_64/private_mem_test.c | 190 ++++++++++++++++ virt/kvm/Kconfig | 4 + virt/kvm/kvm_main.c | 2 +- 14 files changed, 555 insertions(+), 9 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/x86_64/private_mem.h create mode 100644 tools/testing/selftests/kvm/lib/x86_64/private_mem.c create mode 100644 tools/testing/selftests/kvm/x86_64/private_mem_test.c -- 2.38.1.431.g37b22c650d-goog

1 year, 10 months

6
15
0 0

[PATCH] selftests/tpm2: Split async tests call to separate shell script runner

by Nícolas F. R. A. Prado

When the async test case was introduced, despite being a completely independent test case, the command to run it was added to the same shell script as the smoke test case. Since a shell script implicitly returns the error code from the last run command, this effectively caused the script to only return as error code the result from the async test case, hiding the smoke test result (which could then only be seen from the python unittest logs). Move the async test case call to its own shell script runner to avoid the aforementioned issue. This also makes the output clearer to read, since each kselftest KTAP result now matches with one python unittest report. While at it, also make it so the async test case is skipped if /dev/tpmrm0 doesn't exist, since commit 8335adb8f9d3 ("selftests: tpm: add async space test with noneexisting handle") added a test that relies on it. Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> --- tools/testing/selftests/tpm2/Makefile | 2 +- tools/testing/selftests/tpm2/test_async.sh | 10 ++++++++++ tools/testing/selftests/tpm2/test_smoke.sh | 1 - 3 files changed, 11 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/tpm2/test_async.sh diff --git a/tools/testing/selftests/tpm2/Makefile b/tools/testing/selftests/tpm2/Makefile index 1a5db1eb8ed5..a9bf9459fb25 100644 --- a/tools/testing/selftests/tpm2/Makefile +++ b/tools/testing/selftests/tpm2/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) include ../lib.mk -TEST_PROGS := test_smoke.sh test_space.sh +TEST_PROGS := test_smoke.sh test_space.sh test_async.sh TEST_PROGS_EXTENDED := tpm2.py tpm2_tests.py diff --git a/tools/testing/selftests/tpm2/test_async.sh b/tools/testing/selftests/tpm2/test_async.sh new file mode 100755 index 000000000000..43bf5bd772fd --- /dev/null +++ b/tools/testing/selftests/tpm2/test_async.sh @@ -0,0 +1,10 @@ +#!/bin/sh +# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +[ -e /dev/tpm0 ] || exit $ksft_skip +[ -e /dev/tpmrm0 ] || exit $ksft_skip + +python3 -m unittest -v tpm2_tests.AsyncTest diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 3e5ff29ee1dd..58af963e5b55 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -7,4 +7,3 @@ ksft_skip=4 [ -e /dev/tpm0 ] || exit $ksft_skip python3 -m unittest -v tpm2_tests.SmokeTest -python3 -m unittest -v tpm2_tests.AsyncTest -- 2.38.1

1 year, 10 months

3
2
0 0

fw_fallback.sh test failed in Debian 11

by Zhou, Jie2X

hi, fw_fallback.sh test failed. The error may caused by failed to write /sys/devices/virtual/misc/test_firmware/trigger_request. diff firmware/fw_fallback.sh_org firmware/fw_fallback.sh 165c164,165 < echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null & --- > echo "echo -n \"nope-$NAME\" >\"$DIR\"/trigger_request &" > echo -n "nope-$NAME" >"$DIR"/trigger_request & # Test request_partial_firmware_into_buf() off=1 size=6 nofile: OK # Test request_partial_firmware_into_buf() off=2 size=10 nofile: OK # echo -n "nope-test-firmware.bin" >"/sys/devices/virtual/misc/test_firmware"/trigger_request & # ./fw_fallback.sh: line 165: echo: write error: No such file or directory # ./fw_fallback.sh: fallback mechanism immediately cancelled $ echo -n "nope-test-firmware.bin" >/sys/devices/virtual/misc/test_firmware/trigger_request -bash: echo: write error: No such file or directory test OS: Debian 11 test kernel: v6.1-rc6 test output: # ./fw_fallback.sh: fallback mechanism immediately cancelled # # The file never appeared: /sys/devices/virtual/misc/test_firmware/nope-test-firmware.bin/loading # # This might be a distribution udev rule setup by your distribution # to immediately cancel all fallback requests, this must be # removed before running these tests. To confirm look for # a firmware rule like /lib/udev/rules.d/50-firmware.rules # and see if you have something like this: # # SUBSYSTEM=="firmware", ACTION=="add", ATTR{loading}="-1" # # If you do remove this file or comment out this line before # proceeding with these tests. not ok 1 selftests: firmware: fw_run_tests.sh # exit=1 There is not /lib/udev/rules.d/50-firmware.rules in Debian 11. How can fw_run_tests.sh run successfully in Debian 11? best regards,

1 year, 10 months

4
10
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror November 2022