May 2020 - Linux-kselftest-mirror

[PATCH v2 net-next 0/3] ptp: Add adjust phase to support phase offset.

by vincent.cheng.xh＠renesas.com

From: Vincent Cheng <vincent.cheng.xh(a)renesas.com> This series adds adjust phase to the PTP Hardware Clock device interface. Some PTP hardware clocks have a write phase mode that has a built-in hardware filtering capability. The write phase mode utilizes a phase offset control word instead of a frequency offset control word. Add adjust phase function to take advantage of this capability. Changes since v1: - As suggested by Richard Cochran: 1. ops->adjphase is new so need to check for non-null function pointer. 2. Kernel coding style uses lower_case_underscores. 3. Use existing PTP clock API for delayed worker. Vincent Cheng (3): ptp: Add adjphase function to support phase offset control. ptp: Add adjust_phase to ptp_clock_caps capability. ptp: ptp_clockmatrix: Add adjphase() to support PHC write phase mode. drivers/ptp/ptp_chardev.c | 1 + drivers/ptp/ptp_clock.c | 3 ++ drivers/ptp/ptp_clockmatrix.c | 92 +++++++++++++++++++++++++++++++++++ drivers/ptp/ptp_clockmatrix.h | 8 ++- include/linux/ptp_clock_kernel.h | 6 ++- include/uapi/linux/ptp_clock.h | 4 +- tools/testing/selftests/ptp/testptp.c | 6 ++- 7 files changed, 114 insertions(+), 6 deletions(-) -- 2.7.4

2 years, 4 months

5
8
0 0

[PATCH V2 0/3] riscv: add support for restartable sequence

by Vincent Chen

Add RSEQ, restartable sequence, support and related selftest to RISCV. The Kconfig option HAVE_REGS_AND_STACK_ACCESS_API is also required by RSEQ because RSEQ will modify the content of pt_regs.sepc through instruction_pointer_set() during the fixup procedure. In order to select the config HAVE_REGS_AND_STACK_ACCESS_API, the missing APIs for accessing pt_regs are also added in this patch set. The relevant RSEQ tests in kselftest require the Binutils patch "RISC-V: Fix linker problems with TLS copy relocs" to avoid placing PREINIT_ARRAY and TLS variable of librseq.so at the same address. https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=3e7bd7f… A segmental fault will happen if binutils misses this patch. Patrick Stählin (1): riscv: add required functions to enable HAVE_REGS_AND_STACK_ACCESS_API Vincent Chen (2): riscv: Add support for restartable sequence rseq/selftests: Add support for riscv Changes since v1: 1. Use the correct register name to access pt_regs arch/riscv/Kconfig | 2 + arch/riscv/include/asm/ptrace.h | 29 +- arch/riscv/kernel/entry.S | 4 + arch/riscv/kernel/ptrace.c | 99 +++++ arch/riscv/kernel/signal.c | 2 + tools/testing/selftests/rseq/param_test.c | 23 ++ tools/testing/selftests/rseq/rseq-riscv.h | 622 ++++++++++++++++++++++++++++++ tools/testing/selftests/rseq/rseq.h | 2 + 8 files changed, 782 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/rseq/rseq-riscv.h -- 2.7.4

3 years, 5 months

3
8
0 0

[RFC PATCH 0/1] selftests/run_kselftest.sh: make each test individually selectable

by Hangbin Liu

Hi, this patch enhanced the run_kselftest.sh to make the tests individually selectable. I'm not sure the if I could add the reuslt in the patch commit, as the log is too long. So I just put the result to the cover-letter: Note: I use `tr -s "/-" "_"` to cover the path name in tests to function name. e.g. networking/timestamping -> networking_timestamping. I'm not sure if it's legal in Makefile. Before the patch: ]# ./kselftest_install.sh /tmp/kselftests ]# cat /tmp/kselftests/run_kselftest.sh #!/bin/sh BASE_DIR=$(realpath $(dirname $0)) cd $BASE_DIR . ./kselftest/runner.sh ROOT=$PWD if [ "$1" = "--summary" ]; then logfile=$BASE_DIR/output.log cat /dev/null > $logfile fi [ -w /dev/kmsg ] && echo "kselftest: Running tests in android" >> /dev/kmsg cd android run_many \ "run.sh" cd $ROOT ...<snip>... [ -w /dev/kmsg ] && echo "kselftest: Running tests in zram" >> /dev/kmsg cd zram run_many \ "zram.sh" cd $ROOT After the patch: ]# ./kselftest_install.sh /tmp/kselftests ]# cat /tmp/kselftests/run_kselftest.sh #!/bin/sh BASE_DIR=$(realpath $(dirname $0)) . ./kselftest/runner.sh TESTS="android ...<snip>... zram" run_android() { [ -w /dev/kmsg ] && echo "kselftest: Running tests in android" >> /dev/kmsg cd android run_many \ "run.sh" cd $ROOT } ...<snip>... run_zram() { [ -w /dev/kmsg ] && echo "kselftest: Running tests in zram" >> /dev/kmsg cd zram run_many \ "zram.sh" cd $ROOT } usage() { cat <<EOF usage: ${0##*/} OPTS -s | --summary Only print summary info and put detailed log in output.log -t | --tests Test name you want to run specifically -h | --help Show this usage info EOF } while true; do case "$1" in -s | --summary ) logfile=$BASE_DIR/output.log; cat /dev/null > $logfile; shift ;; -t | --tests ) TESTS=$2; shift 2 ;; -h | --help ) usage; exit 0;; "" ) break;; * ) usage; exit 1;; esac done cd $BASE_DIR ROOT=$PWD for test in $TESTS; do run_$test done Hangbin Liu (1): selftests/run_kselftest.sh: make each test individually selectable tools/testing/selftests/Makefile | 48 +++++++++++++++++++++++++------- tools/testing/selftests/lib.mk | 2 +- 2 files changed, 39 insertions(+), 11 deletions(-) -- 2.19.2

4 years, 3 months

3
8
0 0

[PATCH -next] selftests/seccomp: Use bitwise instead of arithmetic operator for flags

by Zou Wei

This silences the following coccinelle warning: "WARNING: sum of probable bitmasks, consider |" tools/testing/selftests/seccomp/seccomp_bpf.c:3131:17-18: WARNING: sum of probable bitmasks, consider | tools/testing/selftests/seccomp/seccomp_bpf.c:3133:18-19: WARNING: sum of probable bitmasks, consider | tools/testing/selftests/seccomp/seccomp_bpf.c:3134:18-19: WARNING: sum of probable bitmasks, consider | tools/testing/selftests/seccomp/seccomp_bpf.c:3135:18-19: WARNING: sum of probable bitmasks, consider | Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Zou Wei <zou_wei(a)huawei.com> --- tools/testing/selftests/seccomp/seccomp_bpf.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index 89fb3e0..1b4cdf3 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -3128,11 +3128,11 @@ TEST(get_metadata) static int user_trap_syscall(int nr, unsigned int flags) { struct sock_filter filter[] = { - BPF_STMT(BPF_LD+BPF_W+BPF_ABS, + BPF_STMT(BPF_LD|BPF_W|BPF_ABS, offsetof(struct seccomp_data, nr)), - BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, nr, 0, 1), - BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_USER_NOTIF), - BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW), + BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, nr, 0, 1), + BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_USER_NOTIF), + BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW), }; struct sock_fprog prog = { -- 2.6.2

4 years, 3 months

2
1
0 0

[v2] dma-buf: heaps: bugfix for selftest failure

by Leon He

From: Leon He <leon.he(a)unisoc.com> There are two errors in the dmabuf-heap selftest: 1. The 'char name[5]' was not initialized to zero, which will cause strcmp(name, "vgem") failed in check_vgem(). 2. The return value of test_alloc_errors() should be reversed, other- wise the while loop in main() will be broken. Signed-off-by: Leon He <leon.he(a)unisoc.com> --- tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c b/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c index cd5e1f6..836b185 100644 --- a/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c +++ b/tools/testing/selftests/dmabuf-heaps/dmabuf-heap.c @@ -22,7 +22,7 @@ static int check_vgem(int fd) { drm_version_t version = { 0 }; - char name[5]; + char name[5] = { 0 }; int ret; version.name_len = 4; @@ -357,7 +357,7 @@ static int test_alloc_errors(char *heap_name) if (heap_fd >= 0) close(heap_fd); - return ret; + return !ret; } int main(void) -- 2.7.4

4 years, 4 months

4
3
0 0

[PATCHv3] selftests/timers: Turn off timeout setting

by Po-Hsu Lin

The following 4 tests in timers can take longer than the default 45 seconds that added in commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") to run: * nsleep-lat - 2m7.350s * set-timer-lat - 2m0.66s * inconsistency-check - 1m45.074s * raw_skew - 2m0.013s Thus they will be marked as failed with the current 45s setting: not ok 3 selftests: timers: nsleep-lat # TIMEOUT not ok 4 selftests: timers: set-timer-lat # TIMEOUT not ok 6 selftests: timers: inconsistency-check # TIMEOUT not ok 7 selftests: timers: raw_skew # TIMEOUT Disable the timeout setting for timers can make these tests finish properly: ok 3 selftests: timers: nsleep-lat ok 4 selftests: timers: set-timer-lat ok 6 selftests: timers: inconsistency-check ok 7 selftests: timers: raw_skew https://bugs.launchpad.net/bugs/1864626 Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com> --- tools/testing/selftests/timers/Makefile | 1 + tools/testing/selftests/timers/settings | 1 + 2 files changed, 2 insertions(+) create mode 100644 tools/testing/selftests/timers/settings diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile index 7656c7c..0e73a16 100644 --- a/tools/testing/selftests/timers/Makefile +++ b/tools/testing/selftests/timers/Makefile @@ -13,6 +13,7 @@ DESTRUCTIVE_TESTS = alarmtimer-suspend valid-adjtimex adjtick change_skew \ TEST_GEN_PROGS_EXTENDED = $(DESTRUCTIVE_TESTS) +TEST_FILES := settings include ../lib.mk diff --git a/tools/testing/selftests/timers/settings b/tools/testing/selftests/timers/settings new file mode 100644 index 0000000..e7b9417 --- /dev/null +++ b/tools/testing/selftests/timers/settings @@ -0,0 +1 @@ +timeout=0 -- 2.7.4

4 years, 4 months

3
4
0 0

[PATCH 1/2] selftests/lkdtm: Don't clear dmesg when running tests

by Michael Ellerman

It is Very Rude to clear dmesg in test scripts. That's because the script may be part of a larger test run, and clearing dmesg potentially destroys the output of other tests. We can avoid using dmesg -c by saving the content of dmesg before the test, and then using diff to compare that to the dmesg afterward, producing a log with just the added lines. Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> --- tools/testing/selftests/lkdtm/run.sh | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/lkdtm/run.sh b/tools/testing/selftests/lkdtm/run.sh index dadf819148a4..0b409e187c7b 100755 --- a/tools/testing/selftests/lkdtm/run.sh +++ b/tools/testing/selftests/lkdtm/run.sh @@ -59,23 +59,25 @@ if [ -z "$expect" ]; then expect="call trace:" fi -# Clear out dmesg for output reporting -dmesg -c >/dev/null - # Prepare log for report checking -LOG=$(mktemp --tmpdir -t lkdtm-XXXXXX) +LOG=$(mktemp --tmpdir -t lkdtm-log-XXXXXX) +DMESG=$(mktemp --tmpdir -t lkdtm-dmesg-XXXXXX) cleanup() { - rm -f "$LOG" + rm -f "$LOG" "$DMESG" } trap cleanup EXIT +# Save existing dmesg so we can detect new content below +dmesg > "$DMESG" + # Most shells yell about signals and we're expecting the "cat" process # to usually be killed by the kernel. So we have to run it in a sub-shell # and silence errors. ($SHELL -c 'cat <(echo '"$test"') >'"$TRIGGER" 2>/dev/null) || true # Record and dump the results -dmesg -c >"$LOG" +dmesg | diff --changed-group-format='%>' --unchanged-group-format='' "$DMESG" - > "$LOG" || true + cat "$LOG" # Check for expected output if egrep -qi "$expect" "$LOG" ; then base-commit: 192ffb7515839b1cc8457e0a8c1e09783de019d3 -- 2.25.1

4 years, 6 months

5
12
0 0

[PATCH drivers/misc 0/4] lkdtm: Various clean ups

by Kees Cook

Hi Greg, Can you please apply these patches to your drivers/misc tree for LKDTM? It's mostly a collection of fixes and improvements and tweaks to the selftest integration. Thanks! -Kees Kees Cook (4): lkdtm: Avoid more compiler optimizations for bad writes lkdtm/heap: Avoid edge and middle of slabs selftests/lkdtm: Reset WARN_ONCE to avoid false negatives lkdtm: Make arch-specific tests always available drivers/misc/lkdtm/bugs.c | 45 +++++++++++++------------ drivers/misc/lkdtm/heap.c | 9 ++--- drivers/misc/lkdtm/lkdtm.h | 2 -- drivers/misc/lkdtm/perms.c | 22 ++++++++---- drivers/misc/lkdtm/usercopy.c | 7 ++-- tools/testing/selftests/lkdtm/run.sh | 6 ++++ tools/testing/selftests/lkdtm/tests.txt | 1 + 7 files changed, 56 insertions(+), 36 deletions(-) -- 2.25.1

4 years, 6 months

7
20
0 0

[PATCH v3 0/7] kunit: create a centralized executor to dispatch all KUnit tests

by Brendan Higgins

## TL;DR This patchset adds a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately along with a couple of new features that depend on it. Also, sorry for the delay in getting this new revision out. I have been really busy for the past couple weeks. ## What am I trying to do? Conceptually, I am trying to provide a mechanism by which test suites can be grouped together so that they can be reasoned about collectively. The last two of three patches in this series add features which depend on this: PATCH 5/7 Prints out a test plan[1] right before KUnit tests are run; this is valuable because it makes it possible for a test harness to detect whether the number of tests run matches the number of tests expected to be run, ensuring that no tests silently failed. The test plan includes a count of tests that will run. With the centralized executor, the tests are located in a single data structure and thus can be counted. PATCH 6/7 Add a new kernel command-line option which allows the user to specify that the kernel poweroff, halt, or reboot after completing all KUnit tests; this is very handy for running KUnit tests on UML or a VM so that the UML/VM process exits cleanly immediately after running all tests without needing a special initramfs. The centralized executor provides a definitive point when all tests have completed and the poweroff, halt, or reboot could occur. In addition, by dispatching tests from a single location, we can guarantee that all KUnit tests run after late_init is complete, which was a concern during the initial KUnit patchset review (this has not been a problem in practice, but resolving with certainty is nevertheless desirable). Other use cases for this exist, but the above features should provide an idea of the value that this could provide. ## Changes since last revision: - On patch 7/7, I added some additional wording around the kunit_shutdown command line option explaining that it runs after built-in tests as suggested by Frank. - On the coverletter, I improved some wording and added a missing link. I also specified the base-commit for the series. - Frank asked for some changes to the documentation; however, David is taking care of that in a separate patch[2], so I did not make those changes here. There will be some additional changes necessary after David's patch is applied. Alan Maguire (1): kunit: test: create a single centralized executor for all tests Brendan Higgins (5): vmlinux.lds.h: add linker section for KUnit test suites arch: um: add linker section for KUnit test suites init: main: add KUnit to kernel init kunit: test: add test plan to KUnit TAP format Documentation: Add kunit_shutdown to kernel-parameters.txt David Gow (1): kunit: Add 'kunit_shutdown' option .../admin-guide/kernel-parameters.txt | 8 ++ arch/um/include/asm/common.lds.S | 4 + include/asm-generic/vmlinux.lds.h | 8 ++ include/kunit/test.h | 82 ++++++++++++------- init/main.c | 4 + lib/kunit/Makefile | 3 +- lib/kunit/executor.c | 71 ++++++++++++++++ lib/kunit/test.c | 11 --- tools/testing/kunit/kunit_kernel.py | 2 +- tools/testing/kunit/kunit_parser.py | 76 ++++++++++++++--- .../test_is_test_passed-all_passed.log | 1 + .../test_data/test_is_test_passed-crash.log | 1 + .../test_data/test_is_test_passed-failure.log | 1 + 13 files changed, 218 insertions(+), 54 deletions(-) create mode 100644 lib/kunit/executor.c base-commit: a2f0b878c3ca531a1706cb2a8b079cea3b17bafc [1] https://github.com/isaacs/testanything.github.io/blob/tap14/tap-version-14-… [2] https://patchwork.kernel.org/patch/11383635/ -- 2.25.1.481.gfbce0eb801-goog

4 years, 6 months

7
19
0 0

[RESEND PATCH 0/3] selftests: lib.mk improvements

by Yauheni Kaliuta

Fix make[1]: execvp: /bin/sh: Argument list too long encountered with some shells and a couple of more potential problems in that part of code. Yauheni Kaliuta (3): selftests: do not use .ONESHELL selftests: fix condition in run_tests selftests: simplify run_tests tools/testing/selftests/lib.mk | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) -- 2.26.2

4 years, 6 months

2
5
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror May 2020