April 2020 - Linux-kselftest-mirror

[PATCH v3 0/7] firmware: add partial read support in request_firmware_into_buf

by Scott Branden

This patch series adds partial read support in request_firmware_into_buf. In order to accept the enhanced API it has been requested that kernel selftests and upstreamed driver utilize the API enhancement and so are included in this patch series. Also in this patch series is the addition of a new Broadcom VK driver utilizing the new request_firmware_into_buf enhanced API. Changes from v2: - remove unnecessary code and mutex locks in lib/test_firmware.c - remove VK_IOCTL_ACCESS_BAR support from driver and use pci sysfs instead - remove bitfields - remove Kconfig default m - adjust formatting and some naming based on feedback - fix error handling conditions - use appropriate return codes - use memcpy_toio instead of direct access to PCIE bar - Scott Branden (7): fs: introduce kernel_pread_file* support firmware: add offset to request_firmware_into_buf test_firmware: add partial read support for request_firmware_into_buf firmware: test partial file reads of request_firmware_into_buf bcm-vk: add bcm_vk UAPI misc: bcm-vk: add Broadcom VK driver MAINTAINERS: bcm-vk: add maintainer for Broadcom VK Driver MAINTAINERS | 7 + drivers/base/firmware_loader/firmware.h | 5 + drivers/base/firmware_loader/main.c | 52 +- drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/bcm-vk/Kconfig | 41 + drivers/misc/bcm-vk/Makefile | 12 + drivers/misc/bcm-vk/bcm_vk.h | 406 +++++ drivers/misc/bcm-vk/bcm_vk_dev.c | 1179 ++++++++++++++ drivers/misc/bcm-vk/bcm_vk_legacy.c | 89 ++ drivers/misc/bcm-vk/bcm_vk_msg.c | 1420 +++++++++++++++++ drivers/misc/bcm-vk/bcm_vk_msg.h | 215 +++ drivers/misc/bcm-vk/bcm_vk_sg.c | 271 ++++ drivers/misc/bcm-vk/bcm_vk_sg.h | 60 + drivers/misc/bcm-vk/bcm_vk_tty.c | 323 ++++ drivers/soc/qcom/mdt_loader.c | 7 +- fs/exec.c | 96 +- include/linux/firmware.h | 8 +- include/linux/fs.h | 20 + include/uapi/linux/misc/bcm_vk.h | 99 ++ lib/test_firmware.c | 144 +- .../selftests/firmware/fw_filesystem.sh | 80 + 22 files changed, 4487 insertions(+), 49 deletions(-) create mode 100644 drivers/misc/bcm-vk/Kconfig create mode 100644 drivers/misc/bcm-vk/Makefile create mode 100644 drivers/misc/bcm-vk/bcm_vk.h create mode 100644 drivers/misc/bcm-vk/bcm_vk_dev.c create mode 100644 drivers/misc/bcm-vk/bcm_vk_legacy.c create mode 100644 drivers/misc/bcm-vk/bcm_vk_msg.c create mode 100644 drivers/misc/bcm-vk/bcm_vk_msg.h create mode 100644 drivers/misc/bcm-vk/bcm_vk_sg.c create mode 100644 drivers/misc/bcm-vk/bcm_vk_sg.h create mode 100644 drivers/misc/bcm-vk/bcm_vk_tty.c create mode 100644 include/uapi/linux/misc/bcm_vk.h -- 2.17.1

4 years, 8 months

1
6
0 0

[bug report] kunit: test: add support for test abort

by Dan Carpenter

Hello Brendan Higgins, The patch 5f3e06208920: "kunit: test: add support for test abort" from Sep 23, 2019, leads to the following static checker warning: lib/kunit/try-catch.c:93 kunit_try_catch_run() misplaced newline? ' # %s: Unknown error: %d lib/kunit/try-catch.c 58 void kunit_try_catch_run(struct kunit_try_catch *try_catch, void *context) 59 { 60 DECLARE_COMPLETION_ONSTACK(try_completion); 61 struct kunit *test = try_catch->test; 62 struct task_struct *task_struct; 63 int exit_code, time_remaining; 64 65 try_catch->context = context; 66 try_catch->try_completion = &try_completion; 67 try_catch->try_result = 0; 68 task_struct = kthread_run(kunit_generic_run_threadfn_adapter, 69 try_catch, 70 "kunit_try_catch_thread"); 71 if (IS_ERR(task_struct)) { 72 try_catch->catch(try_catch->context); 73 return; 74 } 75 76 time_remaining = wait_for_completion_timeout(&try_completion, 77 kunit_test_timeout()); 78 if (time_remaining == 0) { 79 kunit_err(test, "try timed out\n"); ^^ The kunit_log() macro adds its own newline. Most of the callers add a newline. It should be the callers add a newline because that's how everything else works in the kernel. The dev_printk() stuff will sometimes add a newline, but never a duplicate newline. In other words, it's slightly complicated. But basically the caller should add a newline. 80 try_catch->try_result = -ETIMEDOUT; 81 } 82 83 exit_code = try_catch->try_result; 84 85 if (!exit_code) 86 return; 87 88 if (exit_code == -EFAULT) 89 try_catch->try_result = 0; 90 else if (exit_code == -EINTR) 91 kunit_err(test, "wake_up_process() was never called\n"); ^^ 92 else if (exit_code) 93 kunit_err(test, "Unknown error: %d\n", exit_code); ^^ 94 95 try_catch->catch(try_catch->context); 96 } regards, dan carpenter

4 years, 8 months

2
1
0 0

[PATCH v2 1/4] selftests: kmod: Use variable NAME in kmod_test_0001()

by Tiezhu Yang

Use the variable NAME instead of "\000" directly in kmod_test_0001(). Acked-by: Luis Chamberlain <mcgrof(a)kernel.org> Signed-off-by: Tiezhu Yang <yangtiezhu(a)loongson.cn> --- v2: - just add Acked-by tag tools/testing/selftests/kmod/kmod.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh index 3702dbc..da60c3b 100755 --- a/tools/testing/selftests/kmod/kmod.sh +++ b/tools/testing/selftests/kmod/kmod.sh @@ -341,7 +341,7 @@ kmod_test_0001_driver() kmod_defaults_driver config_num_threads 1 - printf '\000' >"$DIR"/config_test_driver + printf $NAME >"$DIR"/config_test_driver config_trigger ${FUNCNAME[0]} config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND } @@ -352,7 +352,7 @@ kmod_test_0001_fs() kmod_defaults_fs config_num_threads 1 - printf '\000' >"$DIR"/config_test_fs + printf $NAME >"$DIR"/config_test_fs config_trigger ${FUNCNAME[0]} config_expect_result ${FUNCNAME[0]} -EINVAL } -- 2.1.0

4 years, 8 months

2
6
0 0

[RESEND v2 0/4] Fix some issues about kmod

by Tiezhu Yang

Tiezhu Yang (4): selftests: kmod: Use variable NAME in kmod_test_0001() kmod: Remove redundant "be an" in the comment kmod: Return directly if module name is empty in request_module() test_kmod: Avoid potential double free in trigger_config_run_type() kernel/kmod.c | 10 +++++++--- lib/test_kmod.c | 2 +- tools/testing/selftests/kmod/kmod.sh | 4 ++-- 3 files changed, 10 insertions(+), 6 deletions(-) -- 2.1.0

4 years, 8 months

1
4
0 0

[PATCH][next] selftests: khugepaged: fix spelling mistake "compount" -> "compound"

by Colin King

From: Colin Ian King <colin.king(a)canonical.com> There are three spelling mistakes in various messages. Fix these. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- tools/testing/selftests/vm/khugepaged.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/vm/khugepaged.c b/tools/testing/selftests/vm/khugepaged.c index 490055290d7f..35f0bfa77ce8 100644 --- a/tools/testing/selftests/vm/khugepaged.c +++ b/tools/testing/selftests/vm/khugepaged.c @@ -654,14 +654,14 @@ static void collapse_single_pte_entry_compound(void) fail("Fail"); madvise(p, hpage_pmd_size, MADV_NOHUGEPAGE); - printf("Split huge page leaving single PTE mapping compount page..."); + printf("Split huge page leaving single PTE mapping compound page..."); madvise(p + page_size, hpage_pmd_size - page_size, MADV_DONTNEED); if (!check_huge(p)) success("OK"); else fail("Fail"); - if (wait_for_scan("Collapse PTE table with single PTE mapping compount page", p)) + if (wait_for_scan("Collapse PTE table with single PTE mapping compound page", p)) fail("Timeout"); else if (check_huge(p)) success("OK"); @@ -685,7 +685,7 @@ static void collapse_full_of_compound(void) else fail("Fail"); - printf("Split huge page leaving single PTE page table full of compount pages..."); + printf("Split huge page leaving single PTE page table full of compound pages..."); madvise(p, page_size, MADV_NOHUGEPAGE); madvise(p, hpage_pmd_size, MADV_NOHUGEPAGE); if (!check_huge(p)) -- 2.25.1

4 years, 8 months

2
1
0 0

[PATCH 1/4] selftests: kmod: Use variable NAME in kmod_test_0001()

by Tiezhu Yang

Use the variable NAME instead of "\000" directly in kmod_test_0001(). Signed-off-by: Tiezhu Yang <yangtiezhu(a)loongson.cn> --- tools/testing/selftests/kmod/kmod.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh index 3702dbc..da60c3b 100755 --- a/tools/testing/selftests/kmod/kmod.sh +++ b/tools/testing/selftests/kmod/kmod.sh @@ -341,7 +341,7 @@ kmod_test_0001_driver() kmod_defaults_driver config_num_threads 1 - printf '\000' >"$DIR"/config_test_driver + printf $NAME >"$DIR"/config_test_driver config_trigger ${FUNCNAME[0]} config_expect_result ${FUNCNAME[0]} MODULE_NOT_FOUND } @@ -352,7 +352,7 @@ kmod_test_0001_fs() kmod_defaults_fs config_num_threads 1 - printf '\000' >"$DIR"/config_test_fs + printf $NAME >"$DIR"/config_test_fs config_trigger ${FUNCNAME[0]} config_expect_result ${FUNCNAME[0]} -EINVAL } -- 2.1.0

4 years, 8 months

2
12
0 0

Re: [PATCH 4/4] test_kmod: Avoid potential double free in trigger_config_run_type()

by Markus Elfring

> It should set config->test_fs instead of config->test_driver as NULL > after kfree_const(config->test_fs) to avoid potential double free. I suggest to improve this change description. * How do you think about a wording variant like the following? Reset the member “test_fs” of the test configuration after a call of the function “kfree_const” to a null pointer so that a double memory release will not be performed. * Would you like to add the tag “Fixes”? Regards, Markus

4 years, 8 months

2
1
0 0

[PATCH] tools/testing/selftests/vm: Remove duplicate headers

by jagdsh.linux＠gmail.com

From: Jagadeesh Pagadala <jagdsh.linux(a)gmail.com> Code cleanup: Remove duplicate headers which are included twice. Signed-off-by: Jagadeesh Pagadala <jagdsh.linux(a)gmail.com> --- tools/testing/selftests/vm/mremap_dontunmap.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/vm/mremap_dontunmap.c b/tools/testing/selftests/vm/mremap_dontunmap.c index ee06cb0..3a7b5ef 100644 --- a/tools/testing/selftests/vm/mremap_dontunmap.c +++ b/tools/testing/selftests/vm/mremap_dontunmap.c @@ -11,7 +11,6 @@ #include <stdio.h> #include <stdlib.h> #include <string.h> -#include <stdlib.h> #include <unistd.h> #include "../kselftest.h" -- 1.8.3.1

4 years, 8 months

1
0
0 0

[PATCH] tools/testing/selftests/powerpc/tm: Remove duplicate headers

by jagdsh.linux＠gmail.com

From: Jagadeesh Pagadala <jagdsh.linux(a)gmail.com> Code cleanup: Remove duplicate headers which are included twice. Signed-off-by: Jagadeesh Pagadala <jagdsh.linux(a)gmail.com> --- tools/testing/selftests/powerpc/tm/tm-poison.c | 1 - tools/testing/selftests/powerpc/tm/tm-vmx-unavail.c | 1 - 2 files changed, 2 deletions(-) diff --git a/tools/testing/selftests/powerpc/tm/tm-poison.c b/tools/testing/selftests/powerpc/tm/tm-poison.c index 9775584..f0257c6 100644 --- a/tools/testing/selftests/powerpc/tm/tm-poison.c +++ b/tools/testing/selftests/powerpc/tm/tm-poison.c @@ -20,7 +20,6 @@ #include <sched.h> #include <sys/types.h> #include <signal.h> -#include <inttypes.h> #include "tm.h" diff --git a/tools/testing/selftests/powerpc/tm/tm-vmx-unavail.c b/tools/testing/selftests/powerpc/tm/tm-vmx-unavail.c index e2a0c07..9ef37a9 100644 --- a/tools/testing/selftests/powerpc/tm/tm-vmx-unavail.c +++ b/tools/testing/selftests/powerpc/tm/tm-vmx-unavail.c @@ -17,7 +17,6 @@ #include <pthread.h> #include <sys/mman.h> #include <unistd.h> -#include <pthread.h> #include "tm.h" #include "utils.h" -- 1.8.3.1

4 years, 8 months

1
0
0 0

[PATCH] tools/testing/selftests/powerpc/mm: Remove duplicate headers

by jagdsh.linux＠gmail.com

From: Jagadeesh Pagadala <jagdsh.linux(a)gmail.com> Code cleanup: Remove duplicate headers which are included twice. Signed-off-by: Jagadeesh Pagadala <jagdsh.linux(a)gmail.com> --- tools/testing/selftests/powerpc/mm/tlbie_test.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/powerpc/mm/tlbie_test.c b/tools/testing/selftests/powerpc/mm/tlbie_test.c index f85a093..48344a7 100644 --- a/tools/testing/selftests/powerpc/mm/tlbie_test.c +++ b/tools/testing/selftests/powerpc/mm/tlbie_test.c @@ -33,7 +33,6 @@ #include <sched.h> #include <time.h> #include <stdarg.h> -#include <sched.h> #include <pthread.h> #include <signal.h> #include <sys/prctl.h> -- 1.8.3.1

4 years, 8 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror April 2020