LAVA

Dashboard ▾

Image Reports

Filters

Bundle Streams

Data Views

Reports

Graphics

Kernel CI

Scheduler ▾

Status

Jobs

Reports

API ▾

Available Methods

Authentication Tokens

Documentation

PDSW Power
▾

My profile

Sign out

You are here:

Job information

Submitted by:

pdsw-power

Requested type:

vexpress-tc2

Description:

bls-release-test-tc2

Status:

Running

Priority:

Medium

On device:

pdswlava-vetc2-2

Submitted at:

Feb. 14, 2013, 9:45 p.m.

Started at:

Feb. 14, 2013, 9:45 p.m.

Finished at:

not finished

Views

Summary

Complete log

Definition

Dispatcher log file - 186
Download as text
file

<LAVA_DISPATCHER>2013-02-14 09:45:05 PM INFO: Attempting to connect to device

Trying 10.1.82.21...
Connected to pdtl-tt1.cambridge.arm.com.
Escape character is '^]'.

<LAVA_DISPATCHER>2013-02-14 09:45:15 PM INFO: Matched <class 'pexpect.TIMEOUT'> which means all-good
<LAVA_DISPATCHER>2013-02-14 09:45:15 PM INFO: [ACTION-B] deploy_linaro_android_image is started with {u'boot': u'http://pdsw-ci.cambridge.arm.com/downloads/releases/13.02/android/RC1/boot.tar.bz2', u'data': u'http://pdsw-ci.cambridge.arm.com/downloads/releases/13.02/android/RC1/userdata.tar.bz2', u'system': u'http://pdsw-ci.cambridge.arm.com/downloads/releases/13.02/android/RC1/system.tar.bz2'}
<LAVA_DISPATCHER>2013-02-14 09:45:15 PM INFO: Booting the system master image
<LAVA_DISPATCHER>2013-02-14 09:45:15 PM INFO: Perform soft reboot the system

skip 437 lines to next
log entry →
root@linaro# reboot
[10722.023006] SysRq : Emergency Remount R/O
[10722.069897] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[10722.093048] Emergency Remount complete
[10722.147957] Disabling non-boot CPUs ...
[10722.169378] CPU1: shutdown
[10722.188336] CPU2: shutdown
[10722.206058] CPU3: shutdown
[10722.223016] IRQ32 no longer affine to CPU4
[10722.223034] IRQ33 no longer affine to CPU4
[10722.223050] IRQ34 no longer affine to CPU4
[10722.223065] IRQ35 no longer affine to CPU4
[10722.223080] IRQ36 no longer affine to CPU4
[10722.223095] IRQ37 no longer affine to CPU4
[10722.223110] IRQ38 no longer affine to CPU4
[10722.223125] IRQ39 no longer affine to CPU4
[10722.223140] IRQ40 no longer affine to CPU4
[10722.223155] IRQ41 no longer affine to CPU4
[10722.224236] CPU4: shutdown
[10722.355453] Restarting system.
Rebooting...
Disabling debug USB.
Switching off ATX PSU.
Board powered down, rebooting...

ARM V2M Firmware v3.1.1
Build Date: Aug 20 2012

Date: Thu 14 Feb 2013
Time: 21:45:45

Powering up system...
Daughterboard fitted to site 1.

Switching on ATXPSU...
ATX3V3: ON
VIOset: 1.8V
MBtemp: 34 degC

Configuring motherboard (rev D, var A)...
IOFPGA config: PASSED
MUXFPGA config: PASSED
OSC CLK config: PASSED

Testing SMC devices (FPGA build 255)...
SRAM 32MB test: PASSED
VRAM 8MB test: PASSED
LAN9118 test: PASSED
USB & OTG test: PASSED
KMI1/KMI2 test: PASSED
MMC & SD test: PASSED
DVI image test: PASSED
AACI AC97 test: PASSED
CF card test: PASSED
UART port test: PASSED
MAC addrs test: PASSED

Reading Site 1 Board File \SITE1\HBI0249A\board.txt
DB1 JTAG configuration complete.
Setting DB1 OSCCLKS...
DB1.0 DCC 0 SPI configuration complete.

Writing SCC 0x40610007 with 0xFF00FF00
Writing SCC 0x40610046 with 0x01CD1011
Writing SCC 0x406101C0 with 0x0032F003
Writing SCC 0x40610048 with 0x022F1010
Writing SCC 0x40610049 with 0x0011710D
Writing SCC 0x4061004A with 0x022F1010
Writing SCC 0x4061004B with 0x0011710D
Writing SCC 0x4061004C with 0x022F1010
Writing SCC 0x4061004D with 0x0011710D
Writing SCC 0x4061004E with 0x022F1010
Writing SCC 0x4061004F with 0x0011710D
Writing SCC 0x40610300 with 0x00000005
Writing SCC 0x40610301 with 0x060E0356
Writing SCC 0x40610302 with 0x00000000
Writing SCC 0x40610303 with 0x00000000
Writing SCC 0x40610304 with 0x384061A8
Writing SCC 0x40610305 with 0x38407530
Writing SCC 0x40610306 with 0x384088B8
Writing SCC 0x40610307 with 0x38409C40
Writing SCC 0x40610308 with 0x3840AFC8
Writing SCC 0x40610309 with 0x3840C350
Writing SCC 0x4061030A with 0x3CF0D6D8
Writing SCC 0x4061030B with 0x41A0EA60
Writing SCC 0x4061030C with 0x3840445C
Writing SCC 0x4061030D with 0x38404E20
Writing SCC 0x4061030E with 0x384061A8
Writing SCC 0x4061030F with 0x38407530
Writing SCC 0x40610310 with 0x384088B8
Writing SCC 0x40610311 with 0x38409C40
Writing SCC 0x40610312 with 0x3CF0AFC8
Writing SCC 0x40610313 with 0x41A0C350
DB1.0 DCC 0 SCC configuration complete.

DB SMB clock enabled.
Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...
Testing SMB clock...
Configuring MUXFPGA for MB.
Setting DVI mode for VGA.
Releasing Daughterboard resets.
Switching MCC log to UART1.

ARM Versatile Express Boot Monitor
Version: V5.1.9
Build Date: Dec 3 2012
Daughterboard Site 1: V2P-CA15_A7 Cortex A15
Daughterboard Site 2: Not Used
Running boot script from flash - BOOTSCRIPT
UEFI firmware (version built at 16:38:55 on Dec 3 2012)
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0x81000180
Info: 2GB Test Chip 2 detected.
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBFAB7240
Loading DxeCore at 0x00BFAB7000 EntryPoint=0x00BFAB7241
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBFAB7000
HOBLIST address in DXE = 0xBF8C9010
Memory Allocation 0x00000004 0xBFFEB000 - 0xBFFEBFFF
Memory Allocation 0x00000004 0xBFFE3000 - 0xBFFEAFFF
Memory Allocation 0x00000004 0xBFFE2000 - 0xBFFE2FFF
Memory Allocation 0x00000004 0xBFFE1000 - 0xBFFE1FFF
Memory Allocation 0x00000004 0xBFFE0000 - 0xBFFE0FFF
Memory Allocation 0x00000004 0xBFFDF000 - 0xBFFDFFFF
Memory Allocation 0x00000004 0xBFFEC000 - 0xC0003FFF
Memory Allocation 0x00000004 0xBFFCF000 - 0xBFFDEFFF
Memory Allocation 0x00000004 0xBFD57000 - 0xBFFCEFFF
Memory Allocation 0x00000004 0xBFAE0000 - 0xBFD56FFF
Memory Allocation 0x00000004 0xBFAB7000 - 0xBFADFFFF
Memory Allocation 0x00000003 0xBFAB7000 - 0xBFADFFFF
FV Hob 0x81000000 - 0x810AFFFF
FV Hob 0xBFAE0000 - 0xBFD55FFF
FV2 Hob 0xBFAE0000 - 0xBFD55FFF
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0xBFA5D240
Loading driver at 0x000BFA5D000 EntryPoint=0x000BFA5D26D ArmCpuDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0xBFA75240
Loading driver at 0x000BFA75000 EntryPoint=0x000BFA7526D RuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0xBFA51240
Loading driver at 0x000BFA51000 EntryPoint=0x000BFA5126D SecurityStubDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0xBFA44240
Loading driver at 0x000BFA44000 EntryPoint=0x000BFA4426D FaultTolerantWriteDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0xBAAA3240
Loading driver at 0x000BAAA3000 EntryPoint=0x000BAAA326D Reset.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0xBAA97240
Loading driver at 0x000BAA97000 EntryPoint=0x000BAA9726D RealTimeClock.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0xBFA27240
Loading driver at 0x000BFA27000 EntryPoint=0x000BFA2726D HiiDatabase.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/SerialDxe/SerialDxe/DEBUG/SerialDxe.dll 0xBFA1D240
Loading driver at 0x000BFA1D000 EntryPoint=0x000BFA1D26D SerialDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe/DEBUG/SP805WatchdogDxe.dll 0xBFA11240
Loading driver at 0x000BFA11000 EntryPoint=0x000BFA1126D SP805WatchdogDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe/DEBUG/AcpiTableDxe.dll 0xBFA00240
Loading driver at 0x000BFA00000 EntryPoint=0x000BFA0026D AcpiTableDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll 0xBF9F0240
Loading driver at 0x000BF9F0000 EntryPoint=0x000BF9F026D DevicePathDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/ArmVeNorFlashDxe.dll 0xBF9E2240
Loading driver at 0x000BF9E2000 EntryPoint=0x000BF9E226D ArmVeNorFlashDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll 0xBAA84240
Loading driver at 0x000BAA84000 EntryPoint=0x000BAA8426D VariableRuntimeDxe.efi
Variable driver failed to add EFI_MEMORY_RUNTIME attribute to Flash.
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0xBF9D7240
Loading driver at 0x000BF9D7000 EntryPoint=0x000BF9D726D MetronomeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/PL390Gic/PL390GicDxe/DEBUG/PL390GicDxe.dll 0xBF9CB240
Loading driver at 0x000BF9CB000 EntryPoint=0x000BF9CB26D PL390GicDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcdGraphicsOutputDxe/DEBUG/HdLcdGraphicsDxe.dll 0xBF9BC240
Loading driver at 0x000BF9BC000 EntryPoint=0x000BF9BC26D HdLcdGraphicsDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/Universal/MmcDxe/MmcDxe/DEBUG/MmcDxe.dll 0xBF9AB240
Loading driver at 0x000BF9AB000 EntryPoint=0x000BF9AB26D MmcDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe/DEBUG/PL180MciDxe.dll 0xBF99F240
Loading driver at 0x000BF99F000 EntryPoint=0x000BF99F26D PL180MciDxe.efi
Card is SD2.0 => Supports high capacity
High capacity card.
- PrintOCR Ocr (0xC0FF8000)
- Card operating voltage: 2.7 to 3.6
- AccessMode: Block Mode (0x2)
- PowerUp
- PrintCID
- Manufacturing date: 6/12
- Product serial number: 0x29B317D
- Product revision: 128
- OEM ID: DS
- PrintRCA: 0xAAAA0520
- Status: 0x520
- RCA: 0xAAAA
- PrintCSD Version 2.00/High Capacity
- Supported card command class: 0x5B5
- Speed: 3.0 10Mbit/s
- Maximum Read Data Block: 512
- Maximum Write Data Block: 512
- Format(0): Hard disk-like file system with partition table
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Bds/Bds/DEBUG/ArmPlatformBds.dll 0xBF985240
Loading driver at 0x000BF985000 EntryPoint=0x000BF98526D ArmPlatformBds.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll 0xBAA7C240
Loading driver at 0x000BAA7C000 EntryPoint=0x000BAA7C26D CapsuleRuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe/DEBUG/MonotonicCounterRuntimeDxe.dll 0xBAA74240
Loading driver at 0x000BAA74000 EntryPoint=0x000BAA7426D MonotonicCounterRuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll 0xBF97A240
Loading driver at 0x000BF97A000 EntryPoint=0x000BF97A26D ArmTimerDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll 0xBF96D240
Loading driver at 0x000BF96D000 EntryPoint=0x000BF96D26D ConPlatformDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe/DEBUG/ConSplitterDxe.dll 0xBF95C240
Loading driver at 0x000BF95C000 EntryPoint=0x000BF95C26D ConSplitterDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe/DEBUG/GraphicsConsoleDxe.dll 0xBF948240
Loading driver at 0x000BF948000 EntryPoint=0x000BF94826D GraphicsConsoleDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll 0xBF936240
Loading driver at 0x000BF936000 EntryPoint=0x000BF93626D TerminalDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll 0xBF92A240
Loading driver at 0x000BF92A000 EntryPoint=0x000BF92A26D DiskIoDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll 0xBF91A240
Loading driver at 0x000BF91A000 EntryPoint=0x000BF91A26D PartitionDxe.efi
add-symbol-file /home/olimar01/edk2/Build/Fat/RELEASE_RVCTLINUX/ARM/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll 0xBF916240
Loading driver at 0x000BF916000 EntryPoint=0x000BF9196A1 Fat.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0xBF90E240
Loading driver at 0x000BF90E000 EntryPoint=0x000BF90E26D Engl[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[0m[35m[40m[2J[01;01H[=3h[2J[01;01H[0m[37m[40m[2J[01;01H[=3h[2J[01;01H[0m[35m[40m[0m[37m[40mThe default boot selection will start in 10 seconds 9 seconds 8 seconds 7 seconds 6 seconds 5 seconds 4 seconds 3 seconds 2 seconds 1 seconds
PEI 487 ms
DXE 8183 ms
BDS 16943 ms
Total Time = 25613 ms

Starting the kernel:

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0-rc8+ (ryan@qpc) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Mon Dec 10 15:59:55 GMT 2012
[ 0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: ARM-Versatile Express, model: V2P-CA15_CA7
[ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c13a1000 s14464 r8192 d14208 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
[ 0.000000] Kernel command line: console=ttyAMA0,38400,n8 root=/dev/mmcblk0p2 rootwait ro mem=1024M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 1025992k/1025992k available, 22584k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05a2358 (5737 kB)
[ 0.000000] .init : 0xc05a3000 - 0xc05df880 ( 243 kB)
[ 0.000000] .data : 0xc05e0000 - 0xc062c628 ( 306 kB)
[ 0.000000] .bss : 0xc062c64c - 0xc0b89e18 (5494 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=5.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Using SP804 '/smb/motherboard/iofpga@3,00000000/timer@110000' as a clock & events source
[ 0.000000] Architected local timer running at 24.00MHz (virt).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000559] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000575] pid_max: default: 32768 minimum: 301
[ 0.000959] Security Framework initialized
[ 0.001015] AppArmor: AppArmor initialized
[ 0.001124] Mount-cache hash table entries: 512
[ 0.004236] CPU: Testing write buffer coherency: ok
[ 0.004315] ftrace: allocating 20454 entries in 40 pages
[ 0.026192] CPU0: update cpu_power 1441
[ 0.026204] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.026248] Setting up static identity map for 0x803e03b0 - 0x803e03fc
[ 0.029096] vexpress_spc loaded at f0008000
[ 0.029107] TC2 power management initialized
[ 0.032375] CPU1: Booted secondary processor
[ 0.032387] CPU1: update cpu_power 1441
[ 0.032392] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.035032] CPU2: Booted secondary processor
[ 0.035060] CPU2: update cpu_power 606
[ 0.035068] CPU2: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.037271] CPU3: Booted secondary processor
[ 0.037284] CPU3: update cpu_power 606
[ 0.037291] CPU3: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.039177] CPU4: Booted secondary processor
[ 0.039191] CPU4: update cpu_power 606
[ 0.039198] CPU4: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.039301] Brought up 5 CPUs
[ 0.039353] SMP: Total of 5 processors activated (240.00 BogoMIPS).
[ 0.039803] CPU0 packing on CPU2
[ 0.039825] CPU1 packing on CPU2
[ 0.039845] CPU2 packing on CPU2
[ 0.039864] CPU3 packing on CPU2
[ 0.039884] CPU4 packing on CPU2
[ 0.042869] devtmpfs: initialized
[ 0.057588] sched: registering cpufreq notifiers for scale-invariant loads
[ 0.063415] regulator-dummy: no parameters
[ 0.065303] NET: Registered protocol family 16
[ 0.065959] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.101453] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.101468] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.101489] Serial: AMBA PL011 UART driver
[ 0.102209] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37) is a PL011 rev2
[ 1.478684] console [ttyAMA0] enabled
[ 1.491378] 1c0a0000.uart: ttyAMA1 at MMIO 0x1c0a0000 (irq = 38) is a PL011 rev2
[ 1.514326] 1c0b0000.uart: ttyAMA2 at MMIO 0x1c0b0000 (irq = 39) is a PL011 rev2
[ 1.537307] 1c0c0000.uart: ttyAMA3 at MMIO 0x1c0c0000 (irq = 40) is a PL011 rev2
[ 1.560548] hw perfevents: enabled with CCI PMU driver, 5 counters available
[ 1.581903] CCI loaded at f0060000
[ 1.639392] bio: create slab <bio-0> at 0
[ 1.653386] 3V3: 3300 mV
[ 1.663689] SCSI subsystem initialized
[ 1.676678] usbcore: registered new interface driver usbfs
[ 1.693533] usbcore: registered new interface driver hub
[ 1.709954] usbcore: registered new device driver usb
[ 1.727982] Advanced Linux Sound Architecture Driver Initialized.
[ 1.749792] NetLabel: Initializing
[ 1.760169] NetLabel: domain hash size = 128
[ 1.773393] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.788626] NetLabel: unlabeled traffic allowed by default
[ 1.805438] Switching to clocksource arch_sys_counter
[ 1.888493] AppArmor: AppArmor Filesystem Enabled
[ 1.940723] NET: Registered protocol family 2
[ 1.955541] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.981144] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 2.025977] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.046106] TCP: reno registered
[ 2.055825] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 2.073985] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 2.094071] NET: Registered protocol family 1
[ 2.108256] RPC: Registered named UNIX socket transport module.
[ 2.126033] RPC: Registered udp transport module.
[ 2.140140] RPC: Registered tcp transport module.
[ 2.154239] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.174374] Trying to unpack rootfs image as initramfs...
[ 2.332841] Freeing initrd memory: 1492K
[ 2.345239] hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 7 counters available
[ 2.369892] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available
[ 2.398346] audit: initializing netlink socket (disabled)
[ 2.414723] type=2000 audit(2.400:1): initialized
[ 2.432860] bounce pool size: 64 pages
[ 2.444798] VFS: Disk quotas dquot_6.5.2
[ 2.456783] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.481394] NFS: Registering the id_resolver key type
[ 2.496972] Key type id_resolver registered
[ 2.509524] Key type id_legacy registered
[ 2.521646] jffs2: version 2.2. (NAND) (SUMMARY) �� 2001-2006 Red Hat, Inc.
[ 2.544686] Btrfs loaded
[ 2.552312] msgmni has been set to 1478
[ 2.566502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.588747] io scheduler noop registered
[ 2.600504] io scheduler deadline registered
[ 2.613416] io scheduler cfq registered (default)
[ 2.635501] hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
[ 2.654846] hdlcd 2b000000.hdlcd: using 1024x768-16@60 mode
[ 2.700035] Console: switching to colour frame buffer device 128x48
[ 2.800876] A15 Vcore: 800 <--> 1050 mV at 895 mV
[ 2.830872] A7 Vcore: 800 <--> 1050 mV at 894 mV
[ 2.860871] VIO: at 1801 mV
[ 3.139592] brd: module loaded
[ 3.154981] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 3.175196] smsc911x: Driver version 2008-10-21
[ 3.204486] libphy: smsc911x-mdio: probed
[ 3.216759] smsc911x 1a000000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1a000000.etherne:01, irq=-1)
[ 3.250967] smsc911x 1a000000.ethernet eth0: MAC Address: 00:02:f7:00:48:95
[ 3.273331] nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
[ 3.292981] nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
[ 3.516027] nxp-isp1760 1b000000.usb: bus width: 32, oc: digital
[ 3.554098] nxp-isp1760 1b000000.usb: irq 48, io mem 0x1b000000
[ 3.572056] nxp-isp1760 1b000000.usb: USB ISP 1761 HW rev. 1 started
[ 3.594839] hub 1-0:1.0: USB hub found
[ 3.606303] hub 1-0:1.0: 1 port detected
[ 3.619558] Initializing USB Mass Storage driver...
[ 3.634612] usbcore: registered new interface driver usb-storage
[ 3.652625] USB Mass Storage support registered.
[ 3.669156] mousedev: PS/2 mouse device common for all mice
[ 3.688624] rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
[ 3.714898] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email-masked]
[ 3.741036] CPUFreq for CPU 0 initialized
[ 3.754748] CPUFreq for CPU 2 initialized
[ 3.768038] cpuidle: using governor ladder
[ 3.780339] cpuidle: using governor menu
[ 3.793074] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000 irq 41,42 (pio)
[ 3.854993] usbcore: registered new interface driver usbhid
[ 3.871730] usbhid: USB HID core driver
[ 3.880984] nxp-isp1760 1b000000.usb: port 1 high speed
[ 3.914799] aaci-pl041 1c040000.aaci: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43
[ 3.919623] mmc0: new SDHC card at address aaaa
[ 3.921203] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
[ 3.953166] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[ 3.979759] aaci-pl041 1c040000.aaci: FIFO 512 entries
[ 3.979819] usb 1-1: new high-speed USB device number 2 using nxp-isp1760
[ 4.017675] oprofile: using timer interrupt.
[ 4.030961] nxp-isp1760 1b000000.usb: port 1 high speed
[ 4.031125] TCP: cubic registered
[ 4.031130] Initializing XFRM netlink socket
[ 4.069552] NET: Registered protocol family 10
[ 4.084744] sit: IPv6 over IPv4 tunneling driver
[ 4.100380] NET: Registered protocol family 17
[ 4.113773] NET: Registered protocol family 15
[ 4.127372] Key type dns_resolver registered
[ 4.140240] VFP support v0.3: [ 4.143601] hub 1-1:1.0: USB hub found
[ 4.143763] hub 1-1:1.0: 3 ports detected
implementor 41 architecture 2 part 30 variant 7 rev 1
[ 4.186504] Registering SWP/SWPB emulation handler
[ 4.200917] CPUidle for CPU0 registered
[ 4.212633] CPUidle for CPU1 registered
[ 4.224273] CPUidle for CPU2 registered
[ 4.236079] CPUidle for CPU3 registered
[ 4.247811] CPUidle for CPU4 registered
[ 4.281495] rtc-pl031 1c170000.rtc: setting system clock to 2013-02-14 21:46:39 UTC (1360878399)
[ 4.308173] ALSA device list:
[ 4.317061] #0: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43
[ 4.337676] Freeing init memory: 240K
Loading, please wait...
[ 4.536507] udevd[1068]: starting version 175
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
[ 4.681038] atkbd serio0: keyboard reset failed on 1c060000.kmi
[ 5.920939] atkbd serio1: keyboard reset failed on 1c070000.kmi
Begin: Running /scripts/local-premount ... done.
FATAL: Could not load /lib/modules/3.7.0-rc8+/modules.dep: No such file or directory
[ 10.056767] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
auto-serial-console start/running, process 1612

Last login: Thu Feb 14 21:47:20 UTC 2013 on tty1
Welcome to Linaro 12.10 (GNU/Linux 3.7.0-rc8+ armv7l)

* Documentation: https://wiki.linaro.org/
root@master:~# export PS1="root@master [rc=$(echo \$?)]# "

root@master [rc=0]# <LAVA_DISPATCHER>2013-02-14 09:47:33 PM INFO: Waiting for network to come up

LC_ALL=C ping -W4 -c1 10.1.82.59
PING 10.1.82.59 (10.1.82.59) 56(84) bytes of data.
64 bytes from 10.1.82.59: icmp_req=1 ttl=64 time=0.775 ms

--- 10.1.82.59 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.775/0.775/0.775/0.000 ms
root@master [rc=0]# ifconfig eth0 | grep 'inet addr' | awk -F: '{print $2}' |awk '{print "<" $1 ">"}'
<10.1.82.33>
root@master [rc=0]# echo "device_version=$(lava-master-image-info --master-image -hwpack | sed 's/[^0-9-]//g; s/^-\+//')/$(lava-master-image-info --master-image- rootfs | sed 's/[^0-9-]//g; s/^-\+//')"
device_version=20121022-378/20121022-276

root@master [rc=0]# <LAVA_DISPATCHER>2013-02-14 09:47:51 PM INFO: System is in master image now
<LAVA_DISPATCHER>2013-02-14 09:47:51 PM INFO: Downloading image: http://pdsw-ci.cambridge.arm.com/downloads/releases/13.02/android/RC1/boot.tar.bz2
<LAVA_DISPATCHER>2013-02-14 09:47:52 PM INFO: Downloading image: http://pdsw-ci.cambridge.arm.com/downloads/releases/13.02/android/RC1/system.tar.bz2
<LAVA_DISPATCHER>2013-02-14 09:48:07 PM INFO: Downloading image: http://pdsw-ci.cambridge.arm.com/downloads/releases/13.02/android/RC1/userdata.tar.bz2

root@master [rc=0]# <LAVA_DISPATCHER>2013-02-14 09:48:08 PM INFO: Format testboot and testrootfs partitions

umount /dev/disk/by-label/testrootfs
umount: /dev/disk/by-label/testrootfs: not mounted
root@master [rc=1]# mkfs -t ext4 -q /dev/disk/by-label/testrootfs -L testrootfs
root@master [rc=0]# umount /dev/disk/by-label/testboot
umount: /dev/disk/by-label/testboot: not mounted
root@master [rc=1]# mkfs.vfat /dev/disk/by-label/testboot -n testboot
mkfs.vfat 3.0.12 (29 Oct 2011)

root@master [rc=0]# <LAVA_DISPATCHER>2013-02-14 10:01:03 PM INFO: Deploying test boot filesystem

skip 669 lines to
next log entry →
mkdir -p /mnt/lava/boot
root@master [rc=0]# mount /dev/disk/by-label/testboot /mnt/lava/boot
root@master [rc=0]# wget --no-check-certificate --no-proxy --connect-timeout=30 -S --progress=dot -e dotbytes=2M -O- http://10.1.82.59/images/tmpuVqvJv/boot.tar .bz2 | tar --warning=no-timestamp --numeric-owner -C /mnt/lava -xjf -
--2013-02-14 22:01:55-- http://10.1.82.59/images/tmpuVqvJv/boot.tar.bz2
Connecting to 10.1.82.59:80... connected.
HTTP request sent, awaiting response...
HTTP/1.1 200 OK
Date: Thu, 14 Feb 2013 22:01:24 GMT
Server: Apache/2.2.22 (Ubuntu)
Last-Modified: Thu, 14 Feb 2013 21:47:52 GMT
ETag: "2a0fec-988d69-4d5b635f397f4"
Accept-Ranges: bytes
Content-Length: 9997673
Keep-Alive: timeout=5, max=100
Connection: Keep-Alive
Content-Type: application/x-bzip2
Length: 9997673 (9.5M) [application/x-bzip2]
Saving to: `STDOUT'

0K .... 100% 1.50M=6.4s

2013-02-14 22:02:01 (1.50 MB/s) - written to stdout [9997673/9997673]

root@master [rc=0]# mkdir -p ~/tmp/
root@master [rc=0]# mv /mnt/lava/boot/uInitrd ~/tmp
root@master [rc=0]# cd ~/tmp/
root@master [rc=0]# dd if=uInitrd of=uInitrd.data ibs=64 skip=1
3546+1 records in
443+1 records out
227006 bytes (227 kB) copied, 0.109682 s, 2.1 MB/s
root@master [rc=0]# mv uInitrd.data ramdisk.cpio.gz
root@master [rc=0]# gzip -d -f ramdisk.cpio.gz; cpio -i -F ramdisk.cpio
755 blocks
root@master [rc=0]# sed -i "/export PATH/a \ \ \ \ export PS1 'root@linaro# '" i nit.rc
root@master [rc=0]# ls init.partitions.rc > /dev/null
ls: cannot access init.partitions.rc: No such file or directory
root@master [rc=2]# ls fstab.partitions > /dev/null
ls: cannot access fstab.partitions: No such file or directory
root@master [rc=2]# ls init.rc > /dev/null
root@master [rc=0]# sed -i "/\/dev\/block\/mmcblk0p3/d" init.rc
root@master [rc=0]# sed -i "s/mmcblk0p5/mmcblk0p6/g" init.rc
root@master [rc=0]# sed -i "s/mmcblk0p2/mmcblk0p5/g" init.rc
root@master [rc=0]# cat init.rc
# Copyright (C) 2012 The Android Open Source Project
#
# IMPORTANT: Do not create world writable files or directories.
# This is a common source of Android security bugs.
#

import /init.usb.rc
import /init.${ro.hardware}.rc
import /init.trace.rc
import /init.partitions.rc

on early-init
# Set init and its forked children's oom_adj.
write /proc/1/oom_adj -16

# Set the security context for the init process.
# This should occur before anything else (e.g. ueventd) is started.
setcon u:r:init:s0

start ueventd

# create mountpoints
mkdir /mnt 0775 root system
mkdir /mnt/sdcard 0000 system system

on init

sysclktz 0

loglevel 3

# setup the global environment
export PATH /sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
export PS1 'root@linaro# '
export LD_LIBRARY_PATH /vendor/lib:/system/lib
export ANDROID_BOOTLOGO 1
export ANDROID_ROOT /system
export ANDROID_ASSETS /system/app
export ANDROID_DATA /data
export ANDROID_STORAGE /storage
export ASEC_MOUNTPOINT /mnt/asec
export LOOP_MOUNTPOINT /mnt/obb
export BOOTCLASSPATH /system/framework/core.jar:/system/framework/core-junit.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/telephony-common.jar:/system/framework/mms-common.jar:/system/framework/android.policy.jar:/system/framework/services.jar:/system/framework/apache-xml.jar

# Backward compatibility
symlink /system/etc /etc
symlink /sys/kernel/debug /d

# Right now vendor lives on the same filesystem as system,
# but someday that may change.
symlink /system/vendor /vendor

# Create cgroup mount point for cpu accounting
mkdir /acct
mount cgroup none /acct cpuacct
mkdir /acct/uid

# Backwards compat (no longer there in stock ICS or JB)
symlink /mnt/sdcard /sdcard

mkdir /system
mkdir /data 0771 system system
mkdir /cache 0770 system cache
mkdir /config 0500 root root

# See storage config details at http://source.android.com/tech/storage/
mkdir /mnt/shell 0700 shell shell
mkdir /storage 0050 root sdcard_r

# Directory for putting things only root should see.
mkdir /mnt/secure 0700 root root
# Create private mountpoint so we can MS_MOVE from staging
mount tmpfs tmpfs /mnt/secure mode=0700,uid=0,gid=0

# Directory for staging bindmounts
mkdir /mnt/secure/staging 0700 root root

# Directory-target for where the secure container
# imagefile directory will be bind-mounted
mkdir /mnt/secure/asec 0700 root root

# Secure container public mount points.
mkdir /mnt/asec 0700 root system
mount tmpfs tmpfs /mnt/asec mode=0755,gid=1000

# Filesystem image public mount points.
mkdir /mnt/obb 0700 root system
mount tmpfs tmpfs /mnt/obb mode=0755,gid=1000

write /proc/sys/kernel/panic_on_oops 1
write /proc/sys/kernel/hung_task_timeout_secs 0
write /proc/cpu/alignment 4
write /proc/sys/kernel/sched_latency_ns 10000000
write /proc/sys/kernel/sched_wakeup_granularity_ns 2000000
write /proc/sys/kernel/sched_compat_yield 1
write /proc/sys/kernel/sched_child_runs_first 0
write /proc/sys/kernel/randomize_va_space 2
write /proc/sys/kernel/kptr_restrict 2
write /proc/sys/kernel/dmesg_restrict 1
write /proc/sys/vm/mmap_min_addr 32768
write /proc/sys/kernel/sched_rt_runtime_us 950000
write /proc/sys/kernel/sched_rt_period_us 1000000

# Create cgroup mount points for process groups
mkdir /dev/cpuctl
mount cgroup none /dev/cpuctl cpu
chown system system /dev/cpuctl
chmod 0660 /dev/cpuctl
chown system system /dev/cpuctl/tasks
chmod 0660 /dev/cpuctl/tasks
write /dev/cpuctl/cpu.shares 1024
write /dev/cpuctl/cpu.rt_runtime_us 950000
write /dev/cpuctl/cpu.rt_period_us 1000000

mkdir /dev/cpuctl/apps
chown system system /dev/cpuctl/apps/tasks
chmod 0666 /dev/cpuctl/apps/tasks
write /dev/cpuctl/apps/cpu.shares 1024
write /dev/cpuctl/apps/cpu.rt_runtime_us 800000
write /dev/cpuctl/apps/cpu.rt_period_us 1000000

mkdir /dev/cpuctl/apps/bg_non_interactive
chown system system /dev/cpuctl/apps/bg_non_interactive/tasks
chmod 0666 /dev/cpuctl/apps/bg_non_interactive/tasks
# 5.0 %
write /dev/cpuctl/apps/bg_non_interactive/cpu.shares 52
write /dev/cpuctl/apps/bg_non_interactive/cpu.rt_runtime_us 700000
write /dev/cpuctl/apps/bg_non_interactive/cpu.rt_period_us 1000000

# Allow everybody to read the xt_qtaguid resource tracking misc dev.
# This is needed by any process that uses socket tagging.
chmod 0644 /dev/xt_qtaguid

on post-fs
# once everything is setup, no need to modify /
# Stock ICS/JB uses ro remount, let's not do that while debugging
mount rootfs rootfs / rw remount
# mount shared so changes propagate into child namespaces
mount rootfs rootfs / shared rec
mount tmpfs tmpfs /mnt/secure private rec

# We chown/chmod /cache again so because mount is run as root + defaults
chown system cache /cache
chmod 0770 /cache
# We restorecon /cache in case the cache partition has been reset.
restorecon /cache

# This may have been created by the recovery system with odd permissions
chown system cache /cache/recovery
chmod 0770 /cache/recovery
# This may have been created by the recovery system with the wrong context.
restorecon /cache/recovery

#change permissions on vmallocinfo so we can grab it from bugreports
chown root log /proc/vmallocinfo
chmod 0440 /proc/vmallocinfo

chown root log /proc/slabinfo
chmod 0440 /proc/slabinfo

#change permissions on kmsg & sysrq-trigger so bugreports can grab kthread stacks
chown root system /proc/kmsg
chmod 0440 /proc/kmsg
chown root system /proc/sysrq-trigger
chmod 0220 /proc/sysrq-trigger
chown system log /proc/last_kmsg
chmod 0440 /proc/last_kmsg

# create the lost+found directories, so as to enforce our permissions
mkdir /cache/lost+found 0770 root root

on post-fs-data
# We chown/chmod /data again so because mount is run as root + defaults
chown system system /data
chmod 0771 /data
# We restorecon /data in case the userdata partition has been reset.
restorecon /data

# Set access for camera
chmod 0666 /dev/video0

# Create dump dir and collect dumps.
# Do this before we mount cache so eventually we can use cache for
# storing dumps on platforms which do not have a dedicated dump partition.
mkdir /data/dontpanic 0750 root log

# Collect apanic data, free resources and re-arm trigger
copy /proc/apanic_console /data/dontpanic/apanic_console
chown root log /data/dontpanic/apanic_console
chmod 0640 /data/dontpanic/apanic_console

copy /proc/apanic_threads /data/dontpanic/apanic_threads
chown root log /data/dontpanic/apanic_threads
chmod 0640 /data/dontpanic/apanic_threads

write /proc/apanic_console 1

# create basic filesystem structure
mkdir /data/misc 01771 system misc
mkdir /data/misc/adb 02750 system shell
mkdir /data/misc/bluedroid 0770 bluetooth net_bt_stack
mkdir /data/misc/bluetooth 0770 system system
mkdir /data/misc/gatord 0700 root root
mkdir /data/misc/keystore 0700 keystore keystore
mkdir /data/misc/keychain 0771 system system
mkdir /data/misc/sms 0770 system radio
mkdir /data/misc/vpn 0770 system vpn
mkdir /data/misc/systemkeys 0700 system system
mkdir /data/misc/vpn/profiles 0770 system system
# give system access to wpa_supplicant.conf for backup and restore
mkdir /data/misc/wifi 0770 wifi wifi
mkdir /data/misc/wifi/sockets 0770 wifi wifi
chmod 0660 /data/misc/wifi/wpa_supplicant.conf
mkdir /data/local 0751 root root

# For security reasons, /data/local/tmp should always be empty.
# Do not place files or directories in /data/local/tmp
mkdir /data/local/tmp 0771 shell shell
mkdir /data/data 0771 system system
mkdir /data/app-private 0771 system system
mkdir /data/app-asec 0700 root root
mkdir /data/app-lib 0771 system system
mkdir /data/app 0771 system system
mkdir /data/property 0700 root root
mkdir /data/ssh 0750 root shell
mkdir /data/ssh/empty 0700 root root

# Setup paths used for socket communication with the dhcp daemon (dhcpd)
mkdir /data/misc/dhcp 0770 dhcp dhcp
chown dhcp dhcp /data/misc/dhcp

# create dalvik-cache, so as to enforce our permissions
mkdir /data/dalvik-cache 0771 system system
# fix permissions if dalvik-cache was there before
chown system system /data/dalvik-cache
chmod 0771 /data/dalvik-cache

# create resource-cache and double-check the perms
mkdir /data/resource-cache 0771 system system
chown system system /data/resource-cache
chmod 0771 /data/resource-cache

# create the lost+found directories, so as to enforce our permissions
mkdir /data/lost+found 0770 root root
mkdir /cache/list+found 0770 root root

# Fix permissions in case lost+found existed before
chown root root /data/lost+found
chmod 0770 /data/lost+found
chown root root /cache/lost+found
chmod 0770 /cache/lost+found

# create directory for DRM plug-ins - give drm the read/write access to
# the following directory.
mkdir /data/drm 0770 drm drm

# If there is no fs-post-data action in the init.<device>.rc file, you
# must uncomment this line, otherwise encrypted filesystems
# won't work.
# Set indication (checked by vold) that we have finished this action
#setprop vold.post_fs_data_done 1

on boot
# basic network init
ifup lo
hostname localhost
domainname localdomain

# set RLIMIT_NICE to allow priorities from 19 to -20
setrlimit 13 40 40

# Define the oom_adj values for the classes of processes that can be
# killed by the kernel. These are used in ActivityManagerService.
setprop ro.FOREGROUND_APP_ADJ 0
setprop ro.VISIBLE_APP_ADJ 1
setprop ro.PERCEPTIBLE_APP_ADJ 2
setprop ro.HEAVY_WEIGHT_APP_ADJ 3
setprop ro.SECONDARY_SERVER_ADJ 4
setprop ro.BACKUP_APP_ADJ 5
setprop ro.HOME_APP_ADJ 6
setprop ro.HIDDEN_APP_MIN_ADJ 7
setprop ro.EMPTY_APP_ADJ 15

# Define the memory thresholds at which the above process classes will
# be killed. These numbers are in pages (4k).
setprop ro.FOREGROUND_APP_MEM 2048
setprop ro.VISIBLE_APP_MEM 3072
setprop ro.PERCEPTIBLE_APP_MEM 4096
setprop ro.HEAVY_WEIGHT_APP_MEM 4096
setprop ro.SECONDARY_SERVER_MEM 6144
setprop ro.BACKUP_APP_MEM 6144
setprop ro.HOME_APP_MEM 6144
setprop ro.HIDDEN_APP_MEM 7168
setprop ro.EMPTY_APP_MEM 8192

# Write value must be consistent with the above properties.
# Note that the driver ony supports 6 slots so we have combined some of
# the classes into the same memory level; the associated processes of higher
# classes will still be killed first.
write /sys/module/lowmemorykiller/parameters/adj 0,1,2,4,7,15

# Memory management. Basic kernel parameters, and allow the high
# level system server to be able to adjust the kernel OOM driver
# parameters to match how it is managing things.
write /proc/sys/vm/overcommit_memory 1
write /proc/sys/vm/min_free_order_shift 4
write /sys/module/lowmemorykiller/parameters/minfree 2048,3072,4096,6144,7168,8192
chown root system /sys/module/lowmemorykiller/parameters/adj
chmod 0664 /sys/module/lowmemorykiller/parameters/adj
chown root system /sys/module/lowmemorykiller/parameters/minfree
chmod 0664 /sys/module/lowmemorykiller/parameters/minfree

# userspace configuration for adb
write /sys/class/android_usb/android0/enable 0
write /sys/class/android_usb/android0/functions adb,acm
write /sys/class/android_usb/android0/f_acm/instances 2
write /sys/class/android_usb/android0/enable 1

# Set init forked children's oom_adj
write /proc/1/oom_score_adj -16

# Tweak background writeout
write /proc/sys/vm/dirty_expire_centisecs 200
write /proc/sys/vm/dirty_background_ratio 5

# Permissions for System Server and daemons.
chown radio system /sys/android_power/state
chown radio system /sys/android_power/request_state
chown radio system /sys/android_power/acquire_full_wake_lock
chown radio system /sys/android_power/acquire_partial_wake_lock
chown radio system /sys/android_power/release_wake_lock
chown system system /sys/power/autosleep
chown system system /sys/power/state
chown system system /sys/power/wakeup_count
chown radio system /sys/power/wake_lock
chown radio system /sys/power/wake_unlock
chmod 0660 /sys/power/state
chmod 0660 /sys/power/wake_lock
chmod 0660 /sys/power/wake_unlock

chown system system /sys/devices/system/cpu/cpufreq/interactive/timer_rate
chmod 0660 /sys/devices/system/cpu/cpufreq/interactive/timer_rate
chown system system /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
chmod 0660 /sys/devices/system/cpu/cpufreq/interactive/min_sample_time
chown system system /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
chmod 0660 /sys/devices/system/cpu/cpufreq/interactive/hispeed_freq
chown system system /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
chmod 0660 /sys/devices/system/cpu/cpufreq/interactive/go_hispeed_load
chown system system /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
chmod 0660 /sys/devices/system/cpu/cpufreq/interactive/above_hispeed_delay
chown system system /sys/devices/system/cpu/cpufreq/interactive/boost
chmod 0660 /sys/devices/system/cpu/cpufreq/interactive/boost
chown system system /sys/devices/system/cpu/cpufreq/interactive/boostpulse
chown system system /sys/devices/system/cpu/cpufreq/interactive/input_boost
chmod 0660 /sys/devices/system/cpu/cpufreq/interactive/input_boost

# Assume SMP uses shared cpufreq policy for all CPUs
chown system system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
chmod 0660 /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq

chown system system /sys/class/timed_output/vibrator/enable
chown system system /sys/class/leds/keyboard-backlight/brightness
chown system system /sys/class/leds/lcd-backlight/brightness
chown system system /sys/class/leds/button-backlight/brightness
chown system system /sys/class/leds/jogball-backlight/brightness
chown system system /sys/class/leds/red/brightness
chown system system /sys/class/leds/green/brightness
chown system system /sys/class/leds/blue/brightness
chown system system /sys/class/leds/red/device/grpfreq
chown system system /sys/class/leds/red/device/grppwm
chown system system /sys/class/leds/red/device/blink
chown system system /sys/class/leds/red/brightness
chown system system /sys/class/leds/green/brightness
chown system system /sys/class/leds/blue/brightness
chown system system /sys/class/leds/red/device/grpfreq
chown system system /sys/class/leds/red/device/grppwm
chown system system /sys/class/leds/red/device/blink
chown system system /sys/class/timed_output/vibrator/enable
chown system system /sys/module/sco/parameters/disable_esco
chown system system /sys/kernel/ipv4/tcp_wmem_min
chown system system /sys/kernel/ipv4/tcp_wmem_def
chown system system /sys/kernel/ipv4/tcp_wmem_max
chown system system /sys/kernel/ipv4/tcp_rmem_min
chown system system /sys/kernel/ipv4/tcp_rmem_def
chown system system /sys/kernel/ipv4/tcp_rmem_max
chown root radio /proc/cmdline

# Load gator module
insmod /system/modules/gator.ko

# Define TCP buffer sizes for various networks
# ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax,
setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,110208
setprop net.tcp.buffersize.wifi 524288,1048576,2097152,262144,524288,1048576
setprop net.tcp.buffersize.lte 524288,1048576,2097152,262144,524288,1048576
setprop net.tcp.buffersize.umts 4094,87380,110208,4096,16384,110208
setprop net.tcp.buffersize.hspa 4094,87380,262144,4096,16384,262144
setprop net.tcp.buffersize.hsupa 4094,87380,262144,4096,16384,262144
setprop net.tcp.buffersize.hsdpa 4094,87380,262144,4096,16384,262144
setprop net.tcp.buffersize.hspap 4094,87380,1220608,4096,16384,1220608
setprop net.tcp.buffersize.edge 4093,26280,35040,4096,16384,35040
setprop net.tcp.buffersize.gprs 4092,8760,11680,4096,8760,11680
setprop net.tcp.buffersize.evdo 4094,87380,262144,4096,16384,262144

# Set this property so surfaceflinger is not started by system_init
setprop system_init.startsurfaceflinger 0

class_start core
class_start main

on nonencrypted
class_start late_start

on charger
class_start charger

on property:vold.decrypt=trigger_reset_main
class_reset main

on property:vold.decrypt=trigger_load_persist_props
load_persist_props

on property:vold.decrypt=trigger_post_fs_data
trigger post-fs-data

on property:vold.decrypt=trigger_restart_min_framework
class_start main

on property:vold.decrypt=trigger_restart_framework
class_start main
class_start late_start

on property:vold.decrypt=trigger_shutdown_framework
class_reset late_start
class_reset main

## Daemon processes to be run by init.
##
service ueventd /sbin/ueventd
class core
critical
seclabel u:r:ueventd:s0

on property:selinux.reload_policy=1
restart ueventd
restart installd

service console /system/bin/sh
class core
console
#disabled
#user shell
group log

on property:ro.debuggable=1
start console

#on property:ro.secure=0
# start console

# adbd is controlled via property triggers in init.<platform>.usb.rc
service adbd /sbin/adbd
class core
socket adbd stream 660 system system
disabled
seclabel u:r:adbd:s0

# Let's also start adb based on persist.service.adb.enable
on property:persist.service.adb.enable=1
start adbd

on property:persist.service.adb.enable=0
stop adbd

service dhcpcd_eth0 /system/bin/dhcpcd -dABKL
class main
group dhcp
disabled
oneshot

# adbd on at boot in emulator
on property:ro.kernel.qemu=1
start adbd

service servicemanager /system/bin/servicemanager
class core
user system
group system
critical
onrestart restart zygote
onrestart restart media
onrestart restart surfaceflinger
onrestart restart drm

service vold /system/bin/vold
class core
socket vold stream 0660 root mount
ioprio be 2

service netd /system/bin/netd
class main
socket netd stream 0660 root system
socket dnsproxyd stream 0660 root inet
socket mdns stream 0660 root system

service debuggerd /system/bin/debuggerd
class main

service ril-daemon /system/bin/rild
class main
socket rild stream 660 root radio
socket rild-debug stream 660 radio system
user root
group radio cache inet misc audio log

service surfaceflinger /system/bin/surfaceflinger
class main
user system
group graphics drmrpc
onrestart restart zygote

service zygote /system/bin/app_process -Xzygote /system/bin --zygote --start-system-server
class main
socket zygote stream 660 root system
onrestart write /sys/android_power/request_state wake
onrestart write /sys/power/state on
onrestart restart media
onrestart restart netd

service drm /system/bin/drmserver
class main
user drm
group drm system inet drmrpc

service media /system/bin/mediaserver
class main
user media
group audio camera inet net_bt net_bt_admin net_bw_acct drmrpc
ioprio rt 4

service bootanim /system/bin/bootanimation
class main
user graphics
group graphics
disabled
oneshot

service installd /system/bin/installd
class main
socket installd stream 600 system system

service flash_recovery /system/etc/install-recovery.sh
class main
oneshot

service racoon /system/bin/racoon
class main
socket racoon stream 600 system system
# IKE uses UDP port 500. Racoon will setuid to vpn after binding the port.
group vpn net_admin inet
disabled
oneshot

service mtpd /system/bin/mtpd
class main
socket mtpd stream 600 system system
user vpn
group vpn net_admin inet net_raw
disabled
oneshot

service keystore /system/bin/keystore /data/misc/keystore
class main
user keystore
group keystore drmrpc
socket keystore stream 666

service dumpstate /system/bin/dumpstate -s
class main
socket dumpstate stream 0660 shell log
disabled
oneshot

service sshd /system/bin/start-ssh
class main
disabled

service mdnsd /system/bin/mdnsd
class main
user mdnsr
group inet net_raw
socket mdnsd stream 0660 mdnsr inet
disabled
oneshot

service gatord /system/bin/gatord -c /data/misc/gatord/configuration.xml
class main
user root
root@master [rc=0]# ls fstab.arm-versatileexpress > /dev/null
root@master [rc=0]# sed -i "/\/dev\/block\/mmcblk0p3/d" fstab.arm-versatileexpre ss
root@master [rc=0]# sed -i "s/mmcblk0p5/mmcblk0p6/g" fstab.arm-versatileexpress
root@master [rc=0]# sed -i "s/mmcblk0p2/mmcblk0p5/g" fstab.arm-versatileexpress
root@master [rc=0]# cat fstab.arm-versatileexpress
# Android fstab file.
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK

/dev/block/mmcblk0p6 /system ext4 ro wait
/dev/block/mmcblk0p6 /data ext4 noatime,nosuid,nodev,nomblk_io_submit,errors=panic wait
root@master [rc=0]# cpio -i -t -F ramdisk.cpio | cpio -o -H newc | g zip > ramdisk_new.cpio.gz
755 blocks
755 blocks
root@master [rc=0]# mkimage -A arm -O linux -T ramdisk -n "Android Ramdisk Image " -d ramdisk_new.cpio.gz uInitrd
Image Name: Android Ramdisk Image
Created: Thu Feb 14 22:03:20 2013
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 227238 Bytes = 221.91 kB = 0.22 MB
Load Address: 00000000
Entry Point: 00000000
root@master [rc=0]# cd -
/root
root@master [rc=0]# mv ~/tmp/uInitrd /mnt/lava/boot/uInitrd
root@master [rc=0]# rm -rf ~/tmp
root@master [rc=0]# umount /mnt/lava/boot

root@master [rc=0]# <LAVA_DISPATCHER>2013-02-14 10:03:01 PM INFO: Deploying the system filesystem

skip 78 lines to next
log entry →
mkdir -p /mnt/lava/system
root@master [rc=0]# mount /dev/disk/by-label/testrootfs /mnt/lava/system
root@master [rc=0]# wget --no-check-certificate --no-proxy --connect-timeout=30 -S --progress=dot -e dotbytes=2M -O- http://10.1.82.59/images/tmpuVqvJv/system.t ar.bz2 | tar --warning=no-timestamp --numeric-owner -C /mnt/lava -xjf -
--2013-02-14 22:03:53-- http://10.1.82.59/images/tmpuVqvJv/system.tar.bz2
Connecting to 10.1.82.59:80... connected.
HTTP request sent, awaiting response...
HTTP/1.1 200 OK
Date: Thu, 14 Feb 2013 22:03:23 GMT
Server: Apache/2.2.22 (Ubuntu)
Last-Modified: Thu, 14 Feb 2013 21:48:07 GMT
ETag: "2a0fed-a812495-4d5b636d9e114"
Accept-Ranges: bytes
Content-Length: 176235669
Keep-Alive: timeout=5, max=100
Connection: Keep-Alive
Content-Type: application/x-bzip2
Length: 176235669 (168M) [application/x-bzip2]
Saving to: `STDOUT'

0K .......... .......... .......... .......... .......... 59% 551K 2m7s
102400K .......... .......... .......... .... 100% 291K=7m5s

2013-02-14 22:10:58 (405 KB/s) - written to stdout [176235669/176235669]

root@master [rc=0]# ls /dev/disk/by-label/userdata > /dev/null
root@master [rc=0]# ls /dev/disk/by-label/sdcard > /dev/null
root@master [rc=0]# ls /mnt/lava/system/etc/vold.fstab > /dev/null
root@master [rc=0]# sed -i "s@dev_mount sdcard /storage/sdcard0 6 @dev_mount sdc ard /storage/sdcard0 7 @" /mnt/lava/system/etc/vold.fstab
root@master [rc=0]# cat /mnt/lava/system/etc/vold.fstab
## Vold 2.0 Generic fstab
## - San Mehat ([email-masked])
##

#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################

dev_mount sdcard /mnt/sdcard 7 /block/mmcblk0/device
root@master [rc=0]# ls /mnt/lava//system/bin/disablesuspend.sh > /dev/null
root@master [rc=0]# sed -i "s/^PS1=.*$/PS1='root@linaro# '/" /mnt/lava/system/et c/mkshrc
root@master [rc=0]# umount /mnt/lava/system
root@master [rc=0]# ls /dev/disk/by-label/userdata > /dev/null
root@master [rc=0]# umount /dev/disk/by-label/userdata
umount: /dev/disk/by-label/userdata: not mounted
root@master [rc=1]# mkfs.ext4 -q /dev/disk/by-label/userdata -L userdata
root@master [rc=0]# udevadm trigger
root@master [rc=0]# mkdir -p /mnt/lava/data
root@master [rc=0]# mount /dev/disk/by-label/userdata /mnt/lava/data
root@master [rc=0]# wget --no-check-certificate --no-proxy --connect-timeout=30 -S --progress=dot -e dotbytes=2M -O- http://10.1.82.59/images/tmpuVqvJv/userdata .tar.bz2 | tar --warning=no-timestamp --numeric-owner -C /mnt/lava -xjf -
--2013-02-14 22:27:53-- http://10.1.82.59/images/tmpuVqvJv/userdata.tar.bz2
Connecting to 10.1.82.59:80... connected.
HTTP request sent, awaiting response...
HTTP/1.1 200 OK
Date: Thu, 14 Feb 2013 22:27:22 GMT
Server: Apache/2.2.22 (Ubuntu)
Last-Modified: Thu, 14 Feb 2013 21:48:07 GMT
ETag: "2a0fee-a5f29-4d5b636db2934"
Accept-Ranges: bytes
Content-Length: 679721
Keep-Alive: timeout=5, max=100
Connection: Keep-Alive
Content-Type: application/x-bzip2
Length: 679721 (664K) [application/x-bzip2]
Saving to: `STDOUT'

0K 100% 1.00M=0.6s

2013-02-14 22:27:53 (1.00 MB/s) - written to stdout [679721/679721]

root@master [rc=0]# umount /mnt/lava/data
root@master [rc=0]# ls /dev/disk/by-label/userdata > /dev/null
root@master [rc=0]# ls /dev/disk/by-label/sdcard > /dev/null

root@master [rc=0]# <LAVA_DISPATCHER>2013-02-14 10:27:41 PM INFO: Reformatting Linaro Android sdcard filesystem

mkfs.vfat /dev/disk/by-label/sdcard -n sdcard
mkfs.vfat 3.0.12 (29 Oct 2011)
root@master [rc=0]# udevadm trigger

root@master [rc=0]# <LAVA_DISPATCHER>2013-02-14 10:30:07 PM INFO: [ACTION-E] deploy_linaro_android_image is finished successfully.
<LAVA_DISPATCHER>2013-02-14 10:30:07 PM INFO: [ACTION-B] boot_linaro_android_image is started with {}
<LAVA_DISPATCHER>2013-02-14 10:30:07 PM INFO: ensuring ADB port is ready
<LAVA_DISPATCHER>2013-02-14 10:30:07 PM INFO: boot_cmds attribute: boot_cmds_android
<LAVA_DISPATCHER>2013-02-14 10:30:07 PM INFO: Perform soft reboot the system

^C
root@master [rc=130]# reboot

Broadcast message from root@master
(/dev/ttyAMA0) at 22:30 ...

The system is going down for reboot NOW!
root@master [rc=0]# udevd[1853]: '/sbin/blkid -o udev -p /dev/mmcblk0p3' [1946] terminated by signal 15 (Terminated)

* Asking all remaining processes to terminate... [80G [74G[ OK ]
* All processes ended within 1 seconds.... [80G [74G[ OK ]
* Deconfiguring network interfaces... [80G [74G[ OK ]
* Deactivating swap... [80G [74G[ OK ]
umount: /run/lock: not mounted
umount: /run/shm: not mounted
* Will now restart
[ 2642.818345]
[ 2642.822797] ======================================================
[ 2642.841299] [ INFO: possible circular locking dependency detected ]
[ 2642.860067] 3.7.0-rc8+ #1 Not tainted
[ 2642.871017] -------------------------------------------------------
[ 2642.889782] reboot/2109 is trying to acquire lock:
[ 2642.904119] (s_active#27){++++.+}, at: [<c010174f>] sysfs_remove_dir+0x5b/0x78
[ 2642.926064]
[ 2642.926064] but task is already holding lock:
[ 2642.943526] (&per_cpu(cpu_policy_rwsem, cpu)){+.+.+.}, at: [<c02e8bb3>] lock_policy_rwsem_write+0x27/0x6c
[ 2642.972486]
[ 2642.972486] which lock already depends on the new lock.
[ 2642.972486]
[ 2642.996982]
[ 2642.996982] the existing dependency chain (in reverse order) is:
[ 2643.019393]
-> #1 (&per_cpu(cpu_policy_rwsem, cpu)){+.+.+.}:
[ 2643.036888] [<c005cc3f>] lock_acquire+0x5f/0xbc
[ 2643.052283] [<c03dea07>] down_write+0x27/0x34
[ 2643.067153] [<c02e8bb3>] lock_policy_rwsem_write+0x27/0x6c
[ 2643.085408] [<c02e8c47>] store+0x23/0x60
[ 2643.098975] [<c0100319>] sysfs_write_file+0xad/0xf8
[ 2643.115409] [<c00bb325>] vfs_write+0x69/0xcc
[ 2643.130019] [<c00bb4d3>] sys_write+0x2f/0x50
[ 2643.144629] [<c000cc81>] ret_fast_syscall+0x1/0x52
[ 2643.160802]
-> #0 (s_active#27){++++.+}:
[ 2643.173095] [<c005c493>] __lock_acquire+0x10af/0x14e4
[ 2643.190050] [<c005cc3f>] lock_acquire+0x5f/0xbc
[ 2643.205442] [<c0101399>] sysfs_addrm_finish+0xbd/0x120
[ 2643.222656] [<c010174f>] sysfs_remove_dir+0x5b/0x78
[ 2643.239087] [<c02531c3>] kobject_del+0xb/0x28
[ 2643.253961] [<c025321f>] kobject_release+0x3f/0x50
[ 2643.270133] [<c02e83bb>] cpufreq_cpu_put+0xf/0x24
[ 2643.286048] [<c02e94dd>] __cpufreq_remove_dev+0x1a9/0x1c4
[ 2643.304271] [<c03d98bd>] cpufreq_cpu_callback+0x41/0x4c
[ 2643.321845] [<c0037d21>] notifier_call_chain+0x45/0x58
[ 2643.339218] [<c001e4e3>] __cpu_notify+0x1f/0x34
[ 2643.354613] [<c03d2a99>] _cpu_down+0x65/0x1ac
[ 2643.369483] [<c001e713>] disable_nonboot_cpus+0x4b/0xa4
[ 2643.386957] [<c002b2df>] kernel_restart+0x13/0x3c
[ 2643.402870] [<c002b417>] sys_reboot+0x103/0x160
[ 2643.418262] [<c000cc81>] ret_fast_syscall+0x1/0x52
[ 2643.434436]
[ 2643.434436] other info that might help us debug this:
[ 2643.434436]
[ 2643.458411] Possible unsafe locking scenario:
[ 2643.458411]
[ 2643.476134] CPU0 CPU1
[ 2643.489689] ---- ----
[ 2643.503244] lock(&per_cpu(cpu_policy_rwsem, cpu));
[ 2643.518116] lock(s_active#27);
[ 2643.535342] lock(&per_cpu(cpu_policy_rwsem, cpu));
[ 2643.557767] lock(s_active#27);
[ 2643.567439]
[ 2643.567439] *** DEADLOCK ***
[ 2643.567439]
[ 2643.585166] 4 locks held by reboot/2109:
[ 2643.596898] #0: (reboot_mutex){+.+.+.}, at: [<c002b3a1>] sys_reboot+0x8d/0x160
[ 2643.619095] #1: (cpu_add_remove_lock){+.+.+.}, at: [<c001e6db>] disable_nonboot_cpus+0x13/0xa4
[ 2643.645459] #2: (cpu_hotplug.lock){+.+.+.}, at: [<c001e55b>] cpu_hotplug_begin+0x23/0x40
[ 2643.670259] #3: (&per_cpu(cpu_policy_rwsem, cpu)){+.+.+.}, at: [<c02e8bb3>] lock_policy_rwsem_write+0x27/0x6c
[ 2643.700526]
[ 2643.700526] stack backtrace:
[ 2643.713576] [<c0012101>] (unwind_backtrace+0x1/0x9c) from [<c03da771>] (print_circular_bug+0x1b1/0x1fc)
[ 2643.741826] [<c03da771>] (print_circular_bug+0x1b1/0x1fc) from [<c005c493>] (__lock_acquire+0x10af/0x14e4)
[ 2643.770933] [<c005c493>] (__lock_acquire+0x10af/0x14e4) from [<c005cc3f>] (lock_acquire+0x5f/0xbc)
[ 2643.797781] [<c005cc3f>] (lock_acquire+0x5f/0xbc) from [<c0101399>] (sysfs_addrm_finish+0xbd/0x120)
[ 2643.824890] [<c0101399>] (sysfs_addrm_finish+0xbd/0x120) from [<c010174f>] (sysfs_remove_dir+0x5b/0x78)
[ 2643.853039] [<c010174f>] (sysfs_remove_dir+0x5b/0x78) from [<c02531c3>] (kobject_del+0xb/0x28)
[ 2643.878845] [<c02531c3>] (kobject_del+0xb/0x28) from [<c025321f>] (kobject_release+0x3f/0x50)
[ 2643.904393] [<c025321f>] (kobject_release+0x3f/0x50) from [<c02e83bb>] (cpufreq_cpu_put+0xf/0x24)
[ 2643.930981] [<c02e83bb>] (cpufreq_cpu_put+0xf/0x24) from [<c02e94dd>] (__cpufreq_remove_dev+0x1a9/0x1c4)
[ 2643.959390] [<c02e94dd>] (__cpufreq_remove_dev+0x1a9/0x1c4) from [<c03d98bd>] (cpufreq_cpu_callback+0x41/0x4c)
[ 2643.989362] [<c03d98bd>] (cpufreq_cpu_callback+0x41/0x4c) from [<c0037d21>] (notifier_call_chain+0x45/0x58)
[ 2644.018554] [<c0037d21>] (notifier_call_chain+0x45/0x58) from [<c001e4e3>] (__cpu_notify+0x1f/0x34)
[ 2644.045662] [<c001e4e3>] (__cpu_notify+0x1f/0x34) from [<c03d2a99>] (_cpu_down+0x65/0x1ac)
[ 2644.070424] [<c03d2a99>] (_cpu_down+0x65/0x1ac) from [<c001e713>] (disable_nonboot_cpus+0x4b/0xa4)
[ 2644.097272] [<c001e713>] (disable_nonboot_cpus+0x4b/0xa4) from [<c002b2df>] (kernel_restart+0x13/0x3c)
[ 2644.125160] [<c002b2df>] (kernel_restart+0x13/0x3c) from [<c002b417>] (sys_reboot+0x103/0x160)
[ 2644.150967] [<c002b417>] (sys_reboot+0x103/0x160) from [<c000cc81>] (ret_fast_syscall+0x1/0x52)
[ 2644.178439] CPU0 packing on CPU-1
[ 2644.188402] CPU4 packing on CPU-1
[ 2644.198417] CPU0 packing on CPU-1
[ 2644.214726] CPU4: shutdown
[ 2644.223721] Restarting system.
Rebooting...
Disabling debug USB.
Switching off ATX PSU.
Board powered down, rebooting...

ARM V2M Firmware v3.1.1
Build Date: Aug 20 2012

Date: Thu 14 Feb 2013
Time: 22:30:54

Powering up system...
Daughterboard fitted to site 1.

Switching on ATXPSU...
ATX3V3: ON
VIOset: 1.8V
MBtemp: 34 degC

Configuring motherboard (rev D, var A)...
IOFPGA config: PASSED
MUXFPGA config: PASSED
OSC CLK config: PASSED

Testing SMC devices (FPGA build 255)...
SRAM 32MB test: PASSED
VRAM 8MB test: PASSED
LAN9118 test: PASSED
USB & OTG test: PASSED
KMI1/KMI2 test: PASSED
MMC & SD test: PASSED
DVI image test: PASSED
AACI AC97 test: PASSED
CF card test: PASSED
UART port test: PASSED
MAC addrs test: PASSED

Reading Site 1 Board File \SITE1\HBI0249A\board.txt
DB1 JTAG configuration complete.
Setting DB1 OSCCLKS...
DB1.0 DCC 0 SPI configuration complete.

Writing SCC 0x40610007 with 0xFF00FF00
Writing SCC 0x40610046 with 0x01CD1011
Writing SCC 0x406101C0 with 0x0032F003
Writing SCC 0x40610048 with 0x022F1010
Writing SCC 0x40610049 with 0x0011710D
Writing SCC 0x4061004A with 0x022F1010
Writing SCC 0x4061004B with 0x0011710D
Writing SCC 0x4061004C with 0x022F1010
Writing SCC 0x4061004D with 0x0011710D
Writing SCC 0x4061004E with 0x022F1010
Writing SCC 0x4061004F with 0x0011710D
Writing SCC 0x40610300 with 0x00000005
Writing SCC 0x40610301 with 0x060E0356
Writing SCC 0x40610302 with 0x00000000
Writing SCC 0x40610303 with 0x00000000
Writing SCC 0x40610304 with 0x384061A8
Writing SCC 0x40610305 with 0x38407530
Writing SCC 0x40610306 with 0x384088B8
Writing SCC 0x40610307 with 0x38409C40
Writing SCC 0x40610308 with 0x3840AFC8
Writing SCC 0x40610309 with 0x3840C350
Writing SCC 0x4061030A with 0x3CF0D6D8
Writing SCC 0x4061030B with 0x41A0EA60
Writing SCC 0x4061030C with 0x3840445C
Writing SCC 0x4061030D with 0x38404E20
Writing SCC 0x4061030E with 0x384061A8
Writing SCC 0x4061030F with 0x38407530
Writing SCC 0x40610310 with 0x384088B8
Writing SCC 0x40610311 with 0x38409C40
Writing SCC 0x40610312 with 0x3CF0AFC8
Writing SCC 0x40610313 with 0x41A0C350
DB1.0 DCC 0 SCC configuration complete.

DB SMB clock enabled.
Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...Waiting for SITE1 CB_READY...
Testing SMB clock...
Configuring MUXFPGA for MB.
Setting DVI mode for VGA.
Releasing Daughterboard resets.
Switching MCC log to UART1.

ARM Versatile Express Boot Monitor
Version: V5.1.9
Build Date: Dec 3 2012
Daughterboard Site 1: V2P-CA15_A7 Cortex A15
Daughterboard Site 2: Not Used
Running boot script from flash - BOOTSCRIPT
UEFI firmware (version built at 16:38:55 on Dec 3 2012)
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0x81000180
Info: 2GB Test Chip 2 detected.
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBFAB7240
Loading DxeCore at 0x00BFAB7000 EntryPoint=0x00BFAB7241
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xBFAB7000
HOBLIST address in DXE = 0xBF8C9010
Memory Allocation 0x00000004 0xBFFEB000 - 0xBFFEBFFF
Memory Allocation 0x00000004 0xBFFE3000 - 0xBFFEAFFF
Memory Allocation 0x00000004 0xBFFE2000 - 0xBFFE2FFF
Memory Allocation 0x00000004 0xBFFE1000 - 0xBFFE1FFF
Memory Allocation 0x00000004 0xBFFE0000 - 0xBFFE0FFF
Memory Allocation 0x00000004 0xBFFDF000 - 0xBFFDFFFF
Memory Allocation 0x00000004 0xBFFEC000 - 0xC0003FFF
Memory Allocation 0x00000004 0xBFFCF000 - 0xBFFDEFFF
Memory Allocation 0x00000004 0xBFD57000 - 0xBFFCEFFF
Memory Allocation 0x00000004 0xBFAE0000 - 0xBFD56FFF
Memory Allocation 0x00000004 0xBFAB7000 - 0xBFADFFFF
Memory Allocation 0x00000003 0xBFAB7000 - 0xBFADFFFF
FV Hob 0x81000000 - 0x810AFFFF
FV Hob 0xBFAE0000 - 0xBFD55FFF
FV2 Hob 0xBFAE0000 - 0xBFD55FFF
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0xBFA5D240
Loading driver at 0x000BFA5D000 EntryPoint=0x000BFA5D26D ArmCpuDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0xBFA75240
Loading driver at 0x000BFA75000 EntryPoint=0x000BFA7526D RuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0xBFA51240
Loading driver at 0x000BFA51000 EntryPoint=0x000BFA5126D SecurityStubDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0xBFA44240
Loading driver at 0x000BFA44000 EntryPoint=0x000BFA4426D FaultTolerantWriteDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe/DEBUG/Reset.dll 0xBAAA3240
Loading driver at 0x000BAAA3000 EntryPoint=0x000BAAA326D Reset.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0xBAA97240
Loading driver at 0x000BAA97000 EntryPoint=0x000BAA9726D RealTimeClock.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0xBFA27240
Loading driver at 0x000BFA27000 EntryPoint=0x000BFA2726D HiiDatabase.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/SerialDxe/SerialDxe/DEBUG/SerialDxe.dll 0xBFA1D240
Loading driver at 0x000BFA1D000 EntryPoint=0x000BFA1D26D SerialDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe/DEBUG/SP805WatchdogDxe.dll 0xBFA11240
Loading driver at 0x000BFA11000 EntryPoint=0x000BFA1126D SP805WatchdogDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe/DEBUG/AcpiTableDxe.dll 0xBFA00240
Loading driver at 0x000BFA00000 EntryPoint=0x000BFA0026D AcpiTableDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll 0xBF9F0240
Loading driver at 0x000BF9F0000 EntryPoint=0x000BF9F026D DevicePathDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/ArmVeNorFlashDxe.dll 0xBF9E2240
Loading driver at 0x000BF9E2000 EntryPoint=0x000BF9E226D ArmVeNorFlashDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll 0xBAA84240
Loading driver at 0x000BAA84000 EntryPoint=0x000BAA8426D VariableRuntimeDxe.efi
Variable driver failed to add EFI_MEMORY_RUNTIME attribute to Flash.
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0xBF9D7240
Loading driver at 0x000BF9D7000 EntryPoint=0x000BF9D726D MetronomeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/PL390Gic/PL390GicDxe/DEBUG/PL390GicDxe.dll 0xBF9CB240
Loading driver at 0x000BF9CB000 EntryPoint=0x000BF9CB26D PL390GicDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/HdLcdGraphicsOutputDxe/DEBUG/HdLcdGraphicsDxe.dll 0xBF9BC240
Loading driver at 0x000BF9BC000 EntryPoint=0x000BF9BC26D HdLcdGraphicsDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/EmbeddedPkg/Universal/MmcDxe/MmcDxe/DEBUG/MmcDxe.dll 0xBF9AB240
Loading driver at 0x000BF9AB000 EntryPoint=0x000BF9AB26D MmcDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe/DEBUG/PL180MciDxe.dll 0xBF99F240
Loading driver at 0x000BF99F000 EntryPoint=0x000BF99F26D PL180MciDxe.efi
Card is SD2.0 => Supports high capacity
High capacity card.
- PrintOCR Ocr (0xC0FF8000)
- Card operating voltage: 2.7 to 3.6
- AccessMode: Block Mode (0x2)
- PowerUp
- PrintCID
- Manufacturing date: 6/12
- Product serial number: 0x29B317D
- Product revision: 128
- OEM ID: DS
- PrintRCA: 0xAAAA0520
- Status: 0x520
- RCA: 0xAAAA
- PrintCSD Version 2.00/High Capacity
- Supported card command class: 0x5B5
- Speed: 3.0 10Mbit/s
- Maximum Read Data Block: 512
- Maximum Write Data Block: 512
- Format(0): Hard disk-like file system with partition table
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPlatformPkg/Bds/Bds/DEBUG/ArmPlatformBds.dll 0xBF985240
Loading driver at 0x000BF985000 EntryPoint=0x000BF98526D ArmPlatformBds.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll 0xBAA7C240
Loading driver at 0x000BAA7C000 EntryPoint=0x000BAA7C26D CapsuleRuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe/DEBUG/MonotonicCounterRuntimeDxe.dll 0xBAA74240
Loading driver at 0x000BAA74000 EntryPoint=0x000BAA7426D MonotonicCounterRuntimeDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll 0xBF97A240
Loading driver at 0x000BF97A000 EntryPoint=0x000BF97A26D ArmTimerDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll 0xBF96D240
Loading driver at 0x000BF96D000 EntryPoint=0x000BF96D26D ConPlatformDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe/DEBUG/ConSplitterDxe.dll 0xBF95C240
Loading driver at 0x000BF95C000 EntryPoint=0x000BF95C26D ConSplitterDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe/DEBUG/GraphicsConsoleDxe.dll 0xBF948240
Loading driver at 0x000BF948000 EntryPoint=0x000BF94826D GraphicsConsoleDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll 0xBF936240
Loading driver at 0x000BF936000 EntryPoint=0x000BF93626D TerminalDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll 0xBF92A240
Loading driver at 0x000BF92A000 EntryPoint=0x000BF92A26D DiskIoDxe.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll 0xBF91A240
Loading driver at 0x000BF91A000 EntryPoint=0x000BF91A26D PartitionDxe.efi
add-symbol-file /home/olimar01/edk2/Build/Fat/RELEASE_RVCTLINUX/ARM/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll 0xBF916240
Loading driver at 0x000BF916000 EntryPoint=0x000BF9196A1 Fat.efi
add-symbol-file /linaro/lt/uefi/uefi-next.git/edk2/Build/ArmVExpress-CTA15-A7/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0xBF90E240
Loading driver at 0x000BF90E000 EntryPoint=0x000BF90E26D Engl[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[0m[35m[40m[2J[01;01H[=3h[2J[01;01H[0m[37m[40m[2J[01;01H[=3h[2J[01;01H[0m[35m[40m[0m[37m[40mThe default boot selection will start in 10 seconds
[1] LAVA Master Image
- VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x2000,0x1A000)/zimage.iks
- Initrd: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x2000,0x1A000)/uInitrd
- Arguments: console=ttyAMA0,38400,n8 root=/dev/mmcblk0p2 rootwait ro mem=1024M
- FDT: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(1,MBR,0x00000000,0x2000,0x1A000)/tc2_dtb.bin
- LoaderType: Linux kernel with Local FDT
[2] LAVA Ubuntu Test Image
- VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/uImage
- Initrd: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/uInitrd
- Arguments: console=ttyAMA0,38400n8 root=/dev/mmcblk0p5 rootwait ro mem=1024M
- FDT: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/v2p-ca15-tc2.dtb
- LoaderType: Linux kernel with Local FDT
[3] LAVA Android Test Image
- VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/uImage
- Initrd: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/uInitrd
- Arguments: console=tty0 console=ttyAMA0,38400n8 rootwait ro init=/init androidboot.console=ttyAMA0
- FDT: VenHw(09831032-6FA3-4484-AF4F-0A000A8D3A82)/HD(3,MBR,0x00000000,0x200000,0x20000)/v2p-ca15-tc2.dtb
- LoaderType: Linux kernel with Local FDT
-----------------------
Global FDT Config
- VenHw(1F15DA3C-37FF-4070-B471-BB4AF12A724A)/MemoryMapped(0x0,0xE800000,0xE803000)
-----------------------
[a] Boot Manager
[b] Shell
Start: 3
PEI 487 ms
DXE 8166 ms
BDS 12758 ms
Total Time = 21412 ms

Starting the kernel:

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-rc7-26523-g2dc54c9 (pdswauto@cz3211bj25) (gcc version 4.7.2 20120910 (prerelease) (crosstool-NG linaro-1.13.1-2012.09-20120921 - Linaro GCC 2012.09) ) #1 SMP Wed Feb 13 15:48:27 GMT 2013
[ 0.000000] CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: ARM-Versatile Express, model: V2P-CA15_CA7
[ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1b9f000 s14720 r8192 d13952 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520191
[ 0.000000] Kernel command line: console=tty0 console=ttyAMA0,38400n8 rootwait ro init=/init androidboot.console=ttyAMA0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Memory: 2032MB = 2032MB total
[ 0.000000] Memory: 2051272k/2051272k available, 45876k reserved, 1302528K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc059a528 (5706 kB)
[ 0.000000] .init : 0xc059b000 - 0xc05d5980 ( 235 kB)
[ 0.000000] .data : 0xc05d6000 - 0xc0620630 ( 298 kB)
[ 0.000000] .bss : 0xc0620630 - 0xc0b78728 (5473 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=5.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Using SP804 '/smb/motherboard/iofpga@3,00000000/timer@110000' as a clock & events source
[ 0.000000] Architected local timer running at 24.00MHz (virt).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.002874] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.002926] pid_max: default: 32768 minimum: 301
[ 0.003399] Mount-cache hash table entries: 512
[ 0.013305] CPU: Testing write buffer coherency: ok
[ 0.013405] ftrace: allocating 19897 entries in 39 pages
[ 0.035217] CPU0: update cpu_power 1441
[ 0.035241] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.035295] Setting up static identity map for 0x803c7730 - 0x803c777c
[ 0.038153] vexpress_spc loaded at f0008000
[ 0.038173] TC2 power management initialized
[ 0.041311] CPU1: Booted secondary processor
[ 0.041323] CPU1: update cpu_power 1441
[ 0.041328] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.043865] CPU2: Booted secondary processor
[ 0.043892] CPU2: update cpu_power 606
[ 0.043899] CPU2: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.046021] CPU3: Booted secondary processor
[ 0.046034] CPU3: update cpu_power 606
[ 0.046041] CPU3: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.047898] CPU4: Booted secondary processor
[ 0.047911] CPU4: update cpu_power 606
[ 0.047918] CPU4: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.048022] Brought up 5 CPUs
[ 0.048282] SMP: Total of 5 processors activated (240.00 BogoMIPS).
[ 0.064154] sched: registering cpufreq notifiers for scale-invariant loads
[ 0.070183] regulator-dummy: no parameters
[ 0.072313] NET: Registered protocol family 16
[ 0.073001] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.078022] hw perfevents: enabled with CCI PMU driver, 5 counters available
[ 0.078271] CCI loaded at f0060000
[ 0.107951] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.107997] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.108057] Serial: AMBA PL011 UART driver
[ 0.108806] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37) is a PL011 rev2
[ 1.486354] console [ttyAMA0] enabled
[ 1.498614] 1c0a0000.uart: ttyAMA1 at MMIO 0x1c0a0000 (irq = 38) is a PL011 rev2
[ 1.521708] 1c0b0000.uart: ttyAMA2 at MMIO 0x1c0b0000 (irq = 39) is a PL011 rev2
[ 1.544684] 1c0c0000.uart: ttyAMA3 at MMIO 0x1c0c0000 (irq = 40) is a PL011 rev2
[ 1.612407] bio: create slab <bio-0> at 0
[ 1.626297] 3V3: 3300 mV
[ 1.636570] SCSI subsystem initialized
[ 1.649405] usbcore: registered new interface driver usbfs
[ 1.666223] usbcore: registered new interface driver hub
[ 1.682580] usbcore: registered new device driver usb
[ 1.700653] Advanced Linux Sound Architecture Driver Initialized.
[ 1.722217] Switching to clocksource arch_sys_counter
[ 1.836386] NET: Registered protocol family 2
[ 1.851280] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.872786] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 1.895424] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.914761] TCP: reno registered
[ 1.924475] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 1.942637] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 1.962780] NET: Registered protocol family 1
[ 1.976920] RPC: Registered named UNIX socket transport module.
[ 1.994713] RPC: Registered udp transport module.
[ 2.008836] RPC: Registered tcp transport module.
[ 2.022949] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.043004] Trying to unpack rootfs image as initramfs...
[ 2.080777] Freeing initrd memory: 220K
[ 2.092777] hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 7 counters available
[ 2.117599] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available
[ 2.149770] bounce pool size: 64 pages
[ 2.161738] VFS: Disk quotas dquot_6.5.2
[ 2.173760] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.198252] NFS: Registering the id_resolver key type
[ 2.213797] Key type id_resolver registered
[ 2.226366] Key type id_legacy registered
[ 2.238515] jffs2: version 2.2. (NAND) (SUMMARY) �� 2001-2006 Red Hat, Inc.
[ 2.260403] fuse init (API version 7.20)
[ 2.273856] Btrfs loaded
[ 2.281496] msgmni has been set to 1462
[ 2.295704] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.317979] io scheduler noop registered
[ 2.329763] io scheduler deadline registered
[ 2.342690] io scheduler cfq registered (default)
[ 2.364709] hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
[ 2.384075] hdlcd 2b000000.hdlcd: using 1024x768-16@60 mode
[ 2.426461] Console: switching to colour frame buffer device 128x48
[ 2.527702] A15 Vcore: 800 <--> 1050 mV at 893 mV
[ 2.557699] A7 Vcore: 800 <--> 1050 mV at 894 mV
[ 2.587698] VIO: at 1800 mV
[ 2.797586] brd: module loaded
[ 2.818835] loop: module loaded
[ 2.831140] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.851705] smsc911x: Driver version 2008-10-21
[ 2.871249] libphy: smsc911x-mdio: probed
[ 2.883594] smsc911x 1a000000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1a000000.etherne:01, irq=-1)
[ 2.917993] smsc911x 1a000000.ethernet eth0: MAC Address: 00:02:f7:00:48:95
[ 2.940565] nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
[ 2.960316] nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
[ 3.183461] nxp-isp1760 1b000000.usb: bus width: 32, oc: digital
[ 3.224931] nxp-isp1760 1b000000.usb: irq 48, io mem 0x1b000000
[ 3.246238] nxp-isp1760 1b000000.usb: USB ISP 1761 HW rev. 1 started
[ 3.271808] hub 1-0:1.0: USB hub found
[ 3.286639] hub 1-0:1.0: 1 port detected
[ 3.303140] Initializing USB Mass Storage driver...
[ 3.321538] usbcore: registered new interface driver usb-storage
[ 3.342934] USB Mass Storage support registered.
[ 3.362466] mousedev: PS/2 mouse device common for all mice
[ 3.385395] rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
[ 3.414669] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email-masked]
[ 3.444427] arm_big_little: CPU 0 initialized
[ 3.462575] arm_big_little: CPU 2 initialized
[ 3.480194] arm_big_little: bL_cpufreq_register: Registered platform driver: vexpress-bL
[ 3.507227] cpuidle: using governor ladder
[ 3.522194] cpuidle: using governor menu
[ 3.537478] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000 irq 41,42 (pio)
[ 3.567772] nxp-isp1760 1b000000.usb: port 1 high speed
[ 3.603876] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.625783] usbcore: registered new interface driver usbhid
[ 3.636444] mmc0: new SDHC card at address aaaa
[ 3.637815] usb 1-1: new high-speed USB device number 2 using nxp-isp1760
[ 3.638158] mmcblk0: mmc0:aaaa SU16G 14.8 GiB
[ 3.691554] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[ 3.697741] nxp-isp1760 1b000000.usb: port 1 high speed
[ 3.735091] usbhid: USB HID core driver
[ 3.750404] ashmem: initialized
[ 3.763022] logger: created 256K log 'log_main'
[ 3.779931] hub 1-1:1.0: USB hub found
[ 3.780056] logger: created 256K log 'log_events'
[ 3.780497] logger: created 256K log 'log_radio'
[ 3.780943] logger: created 256K log 'log_system'
[ 3.797859] aaci-pl041 1c040000.aaci: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43
[ 3.797866] aaci-pl041 1c040000.aaci: FIFO 512 entries
[ 3.800220] oprofile: using timer interrupt.
[ 3.905295] TCP: cubic registered
[ 3.905525] hub 1-1:1.0: 3 ports detected
[ 3.932582] Initializing XFRM netlink socket
[ 3.948425] NET: Registered protocol family 10
[ 3.966262] NET: Registered protocol family 17
[ 3.982136] NET: Registered protocol family 15
[ 3.998186] Key type dns_resolver registered
[ 4.013524] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 1
[ 4.039074] Registering SWP/SWPB emulation handler
[ 4.057529] rtc-pl031 1c170000.rtc: setting system clock to 2013-02-14 22:31:34 UTC (1360881094)
[ 4.086677] CPUidle for CPU0 registered
[ 4.100978] CPUidle for CPU1 registered
[ 4.115178] CPUidle for CPU2 registered
[ 4.129331] CPUidle for CPU3 registered
[ 4.143710] CPUidle for CPU4 registered
[ 4.158175] ALSA device list:
[ 4.169468] #0: ARM AC'97 Interface PL041 rev0 at 0x1c040000, irq 43
[ 4.193470] Freeing init memory: 232K
[ 4.215737] init: could not import file '/init.partitions.rc' from '/init.rc'
[ 4.238204] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 4.387775] atkbd serio0: keyboard reset failed on 1c060000.kmi
[ 5.647752] atkbd serio1: keyboard reset failed on 1c070000.kmi
[ 6.239501] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.265593] fs_mgr: Cannot mount filesystem on /dev/block/mmcblk0p6 at /data
[ 6.286806] init: fs_mgr_mount_all returned an error
[ 6.358184] init: cannot find '/system/bin/sh', disabling 'console'
[ 6.377158] init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
[ 6.402207] init: cannot find '/system/bin/vold', disabling 'vold'
[ 6.420794] init: cannot find '/system/bin/netd', disabling 'netd'
[ 6.439350] init: cannot find '/system/bin/debuggerd', disabling 'debuggerd'
[ 6.460488] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 6.480582] init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger'
[ 6.504337] init: cannot find '/system/bin/app_process', disabling 'zygote'
[ 6.525233] init: cannot find '/system/bin/drmserver', disabling 'drm'
[ 6.544814] init: cannot find '/system/bin/mediaserver', disabling 'media'
[ 6.565436] init: cannot find '/system/bin/installd', disabling 'installd'
[ 6.586106] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 6.611172] init: cannot find '/system/bin/keystore', disabling 'keystore'
[ 6.631787] init: cannot find '/system/bin/gatord', disabling 'gatord'
[ 6.651870] init: cannot find '/system/bin/faketsd', disabling 'faketsd'
[ 6.653036] init: cannot execve('/sbin/set_irq_affinity.sh'): No such file or directory
[ 6.696217] init: cannot find '/system/bin/netcfg', disabling 'netcfghack'
[ 6.850761] init: cannot find '/system/bin/sh', disabling 'console'

LAVA version

Report a bug

Source Code

Validate HTML

LAVA Server is free software developed by Linaro. It is distributed under the terms of the
GNU Affero General Public
License version 3.
You have the right to obtain source code of
any server side installations of this software that you interact
with..