Please try my hack based on Linaro crosstool-ng Canadian windows build.

1) wget http://cbuild.validation.linaro.org/snapshots/crosstool-ng-linaro-1.13.1-4.8-2014.02.tar.bz2
2) tar -xf crosstool-ng-linaro-1.13.1-4.8-2014.02.tar.bz2
3) cd crosstool-ng-linaro-1.13.1-4.8-2014.02
4) sed -i 's/i586-mingw32msvc/arm-linux-gnueabihf/g' contrib/linaro/build.mk
5) sed -i 's/libiconv//g' steps.mk (libiconv is only for Windows)
6) make -f contrib/linaro/build.mk

Finally you will get a toolchain at

./builds/arm-linux-gnueabi-win32/install

(Please ignore the fails at the end to package windows staffs. )

Good luck!
-Zhenqiang

On 11 April 2014 10:18, Anwej Alam <anwej.alam@upheave.in> wrote:
> Dear Chen,
>
> Thanks for your reply.
>
> Yes, I am cross compiling gcc for ARM native GCC compiler. I will follow the
> canadian build and i am also going to try linao
> crosstool-ng for the same.
>
> Please suggest the steps for same.
>
> Thanks in Advance
>
> -br,
> Anwej
> 9958333456
>
>
> On Fri, Apr 11, 2014 at 7:43 AM, Anwej Alam <anwej.alam@upheave.in> wrote:
>>
>> Dear Yvan,
>>
>> I am going to adopt crosstool-ng option. I will update you the status
>> soon.
>> Thank you so much for you support. Let me try first.
>>
>>
>> On Fri, Apr 11, 2014 at 6:41 AM, Zhenqiang Chen
>> <zhenqiang.chen@linaro.org> wrote:
>>>
>>> It seams to me you want a "cross-native" build. The process is similar
>>> with "canadian" build. If you want to try linaro crosstool-ng, I will
>>> give you some instructions.
>>>
>>> -Zhenqiang
>>>
>>> On 11 April 2014 01:41, Anwej Alam <anwej.alam@upheave.in> wrote:
>>> > Dear Sir,
>>> >
>>> > Thank you so much for your reply.
>>> >
>>> > I would like to tell you the exact scenario of my end. I have a SBC
>>> > (nViDia
>>> > Tegra 2) which have The Angstrom Linux Distro without GCC compiler.
>>> > Currently i have a host PC (i686 and Ubuntu 12.04) on which i  cross
>>> > compiles the application for nViDia Tegra 2 and then transfer the
>>> > executable
>>> > to SBC. but now i want to build and compile application on nViDia Tegra
>>> > 2
>>> > itself. for than I need a native GCC compiler on SBC (nViDia Tegra 2).
>>> >
>>> > So, Sir please suggest the method to solve my problem.
>>> >
>>> > Thanks in Advance
>>> >
>>> > -br,
>>> > Anwej
>>> > 9968333456
>>> >
>>> >
>>> > On Thu, Apr 10, 2014 at 10:53 PM, Yvan Roux <yvan.roux@linaro.org>
>>> > wrote:
>>> >>
>>> >> Hi Anwej,
>>> >>
>>> >> these are the right options for an ARM compiler, but you have to tell
>>> >> gcc that you want to build a compiler on an x86 platform that will be
>>> >> use on an ARM one to produce ARM executable, to do so you have to
>>> >> specify the target triplet of the flags --build, --host and --target,
>>> >> but to build the compiler you will also need to build the binutils,
>>> >> and the libc (and if you build for loinux you need the kernel headers
>>> >> as well).  This why kugan suggested to use crosstool-ng (I guess the
>>> >> Linaro wiki page you have seen is about building a native ARM one)
>>> >>
>>> >> Rgds,
>>> >> Yvan
>>> >>
>>> >> On 10 April 2014 19:05, Anwej Alam <anwej.alam@upheave.in> wrote:
>>> >> > I am referring below link for gcc configuration options.
>>> >> >
>>> >> > http://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html
>>> >> >
>>> >> >
>>> >> > On Thu, Apr 10, 2014 at 11:52 AM, Anwej Alam <anwej.alam@upheave.in>
>>> >> > wrote:
>>> >> >>
>>> >> >> Dear Yvan,
>>> >> >>
>>> >> >> Thanks for your reply.
>>> >> >> We are trying to build native gcc compiler for CPU: nViDia Tegra 2
>>> >> >> which
>>> >> >> has ARMv7-a, Cortex-A9 core. We are using host machine as i686 and
>>> >> >> OS:
>>> >> >> ubuntu 12.04.
>>> >> >>
>>> >> >> -br,
>>> >> >> Anwej
>>> >> >> 9958333456
>>> >> >>
>>> >> >>
>>> >> >> On Wed, Apr 9, 2014 at 9:13 PM, Yvan Roux <yvan.roux@linaro.org>
>>> >> >> wrote:
>>> >> >>>
>>> >> >>> Hi Anwej,
>>> >> >>>
>>> >> >>> what kind of machine are you building on? my guess is that you try
>>> >> >>> to
>>> >> >>> do a native build whereas it is a cross one that you need.
>>> >> >>>
>>> >> >>> rgds,
>>> >> >>> Yvan
>>> >> >>>
>>> >> >>> On 9 April 2014 16:32, Anwej Alam <anwej.alam@upheave.in> wrote:
>>> >> >>> > Dear Sir,
>>> >> >>> >
>>> >> >>> > Thanks for you page. it is really very helpful to us.
>>> >> >>> > We are facing a problem during compiling GCC for our ARMv7-a
>>> >> >>> > Cortex-a9.
>>> >> >>> > We are using following option:
>>> >> >>> >
>>> >> >>> > 1.
>>> >> >>> > ../gcc-linaro*/configure --disable-bootstrap
>>> >> >>> > --enable-languages=c,c++
>>> >> >>> > --with-mode=thumb --with-arch=armv7-a --with-tune=cortex-a9
>>> >> >>> > --with-float=hard --with-fpu=vpfv3-d16
>>> >> >>> > --prefix=$home/gcc/gcc-linaro
>>> >> >>> >
>>> >> >>> > 2.
>>> >> >>> > make -j`getconf _NPROCESSORS_ONLN`
>>> >> >>> >
>>> >> >>> > after 2 step we are getting following error:
>>> >> >>> >
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > checking whether putc_unlocked is declared... yes
>>> >> >>> > checking whether getrlimit is declared... yes
>>> >> >>> > checking whether setrlimit is declared... yes
>>> >> >>> > checking whether getrusage is declared... yes
>>> >> >>> > checking whether ldgetname is declared... no
>>> >> >>> > checking whether times is declared... yes
>>> >> >>> > checking whether sigaltstack is declared... yes
>>> >> >>> > checking whether madvise is declared... yes
>>> >> >>> > checking for struct tms... yes
>>> >> >>> > checking for clock_t... yes
>>> >> >>> > checking for F_SETLKW... yes
>>> >> >>> > checking if mkdir takes one argument... no
>>> >> >>> > Unknown CPU given in --with-arch=armv7-a.
>>> >> >>> > make[1]: *** [configure-gcc] Error 1
>>> >> >>> > make[1]: Leaving directory `/home/anwej/src/build'
>>> >> >>> > make: *** [all] Error 2
>>> >> >>> >
>>> >> >>> > Please suggest the solution. where is the problem and what will
>>> >> >>> > be
>>> >> >>> > our
>>> >> >>> > next
>>> >> >>> > steps.
>>> >> >>> >
>>> >> >>> > Thanks in advance.
>>> >> >>> >
>>> >> >>> > -best regards
>>> >> >>> > Anwej Alam
>>> >> >>> > Ph: +91.995.833.3456
>>> >> >>> >
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > _______________________________________________
>>> >> >>> > linaro-toolchain mailing list
>>> >> >>> > linaro-toolchain@lists.linaro.org
>>> >> >>> > http://lists.linaro.org/mailman/listinfo/linaro-toolchain
>>> >> >>> >
>>> >> >>
>>> >> >>
>>> >> >>
>>> >> >>
>>> >> >> --
>>> >> >> -best regards
>>> >> >> Anwej Alam
>>> >> >> Engineer, System Design
>>> >> >> Upheave Systems Pvt. Ltd.
>>> >> >> C-78, 1st Floor, Sec-2 Noida-201301
>>> >> >> Ph: +91.995.833.3456
>>> >> >>       +91.901.573.3456
>>> >> >> Mail to: anwej.alam@upheave.in
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> > --
>>> >> > -best regards
>>> >> > Anwej Alam
>>> >> > Engineer, System Design
>>> >> > Upheave Systems Pvt. Ltd.
>>> >> > C-78, 1st Floor, Sec-2 Noida-201301
>>> >> > Ph: +91.995.833.3456
>>> >> >       +91.901.573.3456
>>> >> > Mail to: anwej.alam@upheave.in
>>> >
>>> >
>>> >
>>> >
>>> > --
>>> > -best regards
>>> > Anwej Alam
>>> > Engineer, System Design
>>> > Upheave Systems Pvt. Ltd.
>>> > C-78, 1st Floor, Sec-2 Noida-201301
>>> > Ph: +91.995.833.3456
>>> >       +91.901.573.3456
>>> > Mail to: anwej.alam@upheave.in
>>> >
>>> > _______________________________________________
>>> > linaro-toolchain mailing list
>>> > linaro-toolchain@lists.linaro.org
>>> > http://lists.linaro.org/mailman/listinfo/linaro-toolchain
>>> >
>>
>>
>>
>>
>> --
>> -best regards
>> Anwej Alam
>> Engineer, System Design
>> Upheave Systems Pvt. Ltd.
>> C-78, 1st Floor, Sec-2 Noida-201301
>> Ph: +91.995.833.3456
>>       +91.901.573.3456
>> Mail to: anwej.alam@upheave.in
>
>
>
>
> --
> -best regards
> Anwej Alam
> Engineer, System Design
> Upheave Systems Pvt. Ltd.
> C-78, 1st Floor, Sec-2 Noida-201301
> Ph: +91.995.833.3456
>       +91.901.573.3456
> Mail to: anwej.alam@upheave.in