You just want not to use " --enable-multiarch".
Thanks,
Andrew Pinski
________________________________ From: linaro-toolchain-bounces@lists.linaro.org linaro-toolchain-bounces@lists.linaro.org on behalf of Diane Holt holt.diane@gmail.com Sent: Wednesday, March 05, 2014 2:33 PM To: Zhenqiang Chen Cc: Linaro Toolchain Subject: Re: Building 4.8 without multilib
On the other hand, disabling multilib didn't accomplish what I wanted. What I want is for things to be where they used to be, with regard to /lib, /usr/lib, /usr/include, and include/C++ -- I don't want that extra arm-linux-gnueabi subdir under those. Granted, I can re-organize things once I've got the toolchain built, but it would be nice not to have to go through all that, since it's a bit of a pain to do (it's not just moving files, but re-doing symlinks as well). That's what I hoped --disable-multilib would do -- keep things simple and not create those extra subdirs. Is there no way now to not have that happen?
Thanks, Diane
On Wed, Mar 5, 2014 at 2:21 PM, Diane Holt <holt.diane@gmail.commailto:holt.diane@gmail.com> wrote: I don't build eglibc -- I use a prebuilt one. But that does look to have been the issue. The one I used before was 2.12.1, so I tried a later one (2.15) and things worked.
Thanks very much, Diane
On Tue, Mar 4, 2014 at 10:09 PM, Zhenqiang Chen <zhenqiang.chen@linaro.orgmailto:zhenqiang.chen@linaro.org> wrote: How do you build your eglibc/glibc?
Can you share your gcc config for me to reproduce it?
Thanks! -Zhenqiang
On 5 March 2014 10:49, Diane Holt <holt.diane@gmail.commailto:holt.diane@gmail.com> wrote:
Sorry, but I'm not sure I understand either of these replies. I'm trying to find a way to be able to build with --disable-multilib. When I build with multilib enabled, it succeeds just fine.
Thanks, Diane
On Tue, Mar 4, 2014 at 6:37 PM, Ryan Arnold <ryan.arnold@linaro.orgmailto:ryan.arnold@linaro.org> wrote:
On Wed, Mar 5, 2014 at 8:01 AM, Diane Holt <holt.diane@gmail.commailto:holt.diane@gmail.com> wrote:
Is that supposed to be possible? When I add --disable-multilib to the configure options, the build fails on the install, because it hasn't built any of src/gcc-linaro-4.8-2014.02/libgcc:
/bin/sh ../../../../src/gcc-linaro-4.8-2014.02/libgcc/../mkinstalldirs
/home/ubuntu/work483/build/sysroot/home/ubuntu/opt/cross-gcc-linaro/lib/gcc/arm-linux-gnueabi/4.8.3 /usr/bin/install -c -m 644 libgcc_eh.a
/home/ubuntu/work483/build/sysroot/home/ubuntu/opt/cross-gcc-linaro/lib/gcc/arm-linux-gnueabi/4.8.3/ /usr/bin/install: cannot stat `libgcc_eh.a': No such file or directory make[3]: *** [install-shared] Error 1 make[3]: Leaving directory `/home/ubuntu/work483/build/gcc/arm-linux-gnueabi/libgcc' make[2]: *** [install-target-libgcc] Error 2 make[2]: Leaving directory `/home/ubuntu/work483/build/gcc' make[1]: *** [install] Error 2 make[1]: Leaving directory `/home/ubuntu/work483/build/gcc' make: *** [stamp/gcc-install] Error 2
I don't want or need multilib, so I'd rather build the toolchain without it, but before I try to make that happen, I wanted to make sure it's supposed to be able to get built correctly that way.
Thanks, Diane
Diane,
I ran into this issue as well, and believe that it's related to your sysroot lacking the proper soft-float headers and/or missing kernel headers.
This means that your sysroots include/ directory needs to be prepared for multi-lib headers before you do a multi-lib enabled gcc build.
So, what I did was identify the multi-lib configurations that are enabled when I selected a particular --target.
Take that information and build the kernel headers for all configurations and install those headers into the sysroot include directory.
Then build a glibc version for each configuration and install the headers into the sysroot.
Then you might need to inform GCC where the include directories are (though a properly formatted multi-lib sysroot should be automatically detected when you pass the sysroot switch).
Zhenqiang Chen knows about this process a bit better than I do.
-- Ryan S. Arnold Linaro Toolchain Working Group www.linaro.orghttp://www.linaro.org/