On 10/11/11 10:04, Loïc Minier wrote:
HeyWhen building u-boot for an ARMv5T platform (versatileqemu_config), the Ubuntu-packaged Linaro cross-toolchain isn't suitable because it only offers an ARMv7T2 libgcc. But I'd like the build to fail when that happens rather than silently generating an u-boot.bin which will trigger a SIGILL when it hits the first non-ARMv5T instruction.
I heard that gcc/ld are supposed to check this, but I'm not sure how it's supposed to work; perhaps the way u-boot does its final link prevents this from working properly?
I tried building u-boot as follows: make O=obj-broken \ CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm \ OPTFLAGS="-marm -march=armv5te" \ versatileqemu_config
make O=obj-broken \ CROSS_COMPILE=arm-linux-gnueabi- ARCH=arm \ OPTFLAGS="-marm -march=armv5te" \ -j2The final link looks like this: UNDEF_SYM=`arm-linux-gnueabi-objdump -x /home/lool/git/denx/u-boot/obj-v-broken/board/armltd/versatile/libversatile.o /home/lool/git/denx/u-boot/obj-v-broken/api/libapi.o /home/lool/git/denx/u-boot/obj-v-broken/arch/arm/cpu/arm926ejs/libarm926ejs.o /home/lool/git/denx/u-boot/obj-v-broken/arch/arm/cpu/arm926ejs/versatile/libversatile.o /home/lool/git/denx/u-boot/obj-v-broken/arch/arm/lib/libarm.o /home/lool/git/denx/u-boot/obj-v-broken/common/libcommon.o /home/lool/git/denx/u-boot/obj-v-broken/disk/libdisk.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/bios_emulator/libatibiosemu.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/block/libblock.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/dma/libdma.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/fpga/libfpga.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/gpio/libgpio.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/hwmon/libhwmon.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/i2c/libi2c.o /home/lool/git/denx
/u-boot/obj-v-broken/drivers/input/libinput.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/misc/libmisc.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/mmc/libmmc.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/mtd/libmtd.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/mtd/nand/libnand.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/mtd/onenand/libonenand.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/mtd/spi/libspi_flash.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/mtd/ubi/libubi.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/net/libnet.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/net/phy/libphy.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/pci/libpci.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/pcmcia/libpcmcia.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/power/libpower.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/rtc/librtc.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/serial/libserial.o /home/lool/git/denx/u-boot/obj-v-bro ken/drivers/spi/libspi.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/twserial/libtws.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/usb/eth/libusb_eth.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/usb/gadget/libusb_gadget.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/usb/host/libusb_host.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/usb/musb/libusb_musb.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/usb/phy/libusb_phy.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/video/libvideo.o /home/lool/git/denx/u-boot/obj-v-broken/drivers/watchdog/libwatchdog.o /home/lool/git/denx/u-boot/obj-v-broken/fs/cramfs/libcramfs.o /home/lool/git/denx/u-boot/obj-v-broken/fs/ext2/libext2fs.o /home/lool/git/denx/u-boot/obj-v-broken/fs/fat/libfat.o /home/lool/git/denx/u-boot/obj-v-broken/fs/fdos/libfdos.o /home/lool/git/denx/u-boot/obj-v-broken/fs/jffs2/libjffs2.o /home/lool/git/denx/u-boot/obj-v-broken/fs/reiserfs/libreiserfs.o /home/lool/git/denx/u-boot/obj-v-broken/fs/ubi fs/libubifs.o /home/lool/git/denx/u-boot/obj-v-broken/fs/yaffs2/libyaffs2.o /home/lool/git/denx/u-boot/obj-v-broken/lib/libfdt/libfdt.o /home/lool/git/denx/u-boot/obj-v-broken/lib/libgeneric.o /home/lool/git/denx/u-boot/obj-v-broken/lib/lzma/liblzma.o /home/lool/git/denx/u-boot/obj-v-broken/lib/lzo/liblzo.o /home/lool/git/denx/u-boot/obj-v-broken/lib/zlib/libz.o /home/lool/git/denx/u-boot/obj-v-broken/net/libnet.o /home/lool/git/denx/u-boot/obj-v-broken/post/libpost.o | sed -n -e 's/.*(__u_boot_cmd_.*)/-u\1/p'|sort|uniq`; cd /home/lool/git/denx/u-boot/obj-v-broken && arm-linux-gnueabi-ld -pie -T /home/lool/git/denx/u-boot/obj-v-broken/u-boot.lds -Bstatic -Ttext 0x10000 $UNDEF_SYM arch/arm/cpu/arm926ejs/start.o --start-group api/libapi.o arch/arm/cpu/arm926ejs/libarm926ejs.o arch/arm/cpu/arm926ejs/versatile/libversatile.o arch/arm/lib/libarm.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/ libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o net/libnet.o post/libpost.o board/armltd/versatile/libversatile.o --end-group /home/lool/git/denx/u-boot/obj-v-broken/arch/arm/lib/eabi_compat.o -L /usr/lib/gcc/arm-linux-gnueabi/4.6.1 -lgcc -Map u-boot.map -o u-boot
I verified that all the .o files passed above have Tag_CPU_name: "5TE" in their arm-linux-gnueabi-readelf -A output; the only problematic file is -lgcc.
Note that the final link is done with arm-linux-gnueabi-ld and doesn't set any architecture; I changed it manually to use gcc and pass the -marm -march=armv5te, and had to set -nostdlib too when using gcc: arm-linux-gnueabi-gcc -marm -march=armv5te -nostdlib -pie -T /home/lool/git/denx/u-boot/obj-v-broken/u-boot.lds -Bstatic -Ttext 0x10000 $UNDEF_SYM arch/arm/cpu/arm926ejs/start.o -Wl,--start-group api/libapi.o arch/arm/cpu/arm926ejs/libarm926ejs.o arch/arm/cpu/arm926ejs/versatile/libversatile.o arch/arm/lib/libarm.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o drivers/usb/
gadget/libusb_gadget.o drivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o drivers/video/libvideo.o drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o net/libnet.o post/libpost.o board/armltd/versatile/libversatile.o -Wl,--end-group /home/lool/git/denx/u-boot/obj-v-broken/arch/arm/lib/eabi_compat.o -L /usr/lib/gcc/arm-linux-gnueabi/4.6.1 -lgcc -Wl,-Map u-boot.map -o u-boot
But this command works and produces an u-boot ELF which has Tag_CPU_name: "7-A".
The build attributes were never intended to be used in executables; the format is too expensive to decode in most situations. Instead the ABI specification included an optional PHEADER that had a highly simplified indication of the executable compatibility of an image (essentially the architecture). Unfortunately this has never been added to GNU Binutils.
See PT_ARM_ARCHEXT in the ARM ELF specification (available from infocenter).
R.
How would I break the build when libgcc isn't ARMv5T?
Thanks,
-- Richard Earnshaw Email: Richard.Earnshaw@arm.com Engineering Manager Phone: +44 1223 400569 (Direct + VoiceMail) OpenSource Tools Switchboard: +44 1223 400400 ARM Ltd Fax: +44 1223 400410 110 Fulbourn Rd Web: http://www.arm.com/ Cambridge, UK. CB1 9NJ
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.