[TCWG CI] 450.soplex grew in size by 2% after gcc: Avoid invalid loop transformations in jump threading registry.

After gcc commit 4a960d548b7d7d942f316c5295f6d849b74214f5 Author: Aldy Hernandez aldyh@redhat.com

Avoid invalid loop transformations in jump threading registry.

the following benchmarks grew in size by more than 1%: - 450.soplex grew in size by 2% from 207260 to 211436 bytes

Below reproducer instructions can be used to re-build both "first_bad" and "last_good" cross-toolchains used in this bisection. Naturally, the scripts will fail when triggerring benchmarking jobs if you don't have access to Linaro TCWG CI.

For your convenience, we have uploaded tarballs with pre-processed source and assembly files at: - First_bad save-temps: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar... - Last_good save-temps: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar... - Baseline save-temps: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar...

Configuration: - Benchmark: SPEC CPU2006 - Toolchain: GCC + Glibc + GNU Linker - Version: all components were built from their tip of trunk - Target: aarch64-linux-gnu - Compiler flags: -Os -flto - Hardware: APM Mustang 8x X-Gene1

This benchmarking CI is work-in-progress, and we welcome feedback and suggestions at linaro-toolchain@lists.linaro.org . In our improvement plans is to add support for SPEC CPU2017 benchmarks and provide "perf report/annotate" data behind these reports.

THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT.

This commit has regressed these CI configurations: - tcwg_bmk_gnu_apm/gnu-master-aarch64-spec2k6-Os_LTO

First_bad build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar... Last_good build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar... Baseline build: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar... Even more details: https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar...

Reproduce builds: <cut> mkdir investigate-gcc-4a960d548b7d7d942f316c5295f6d849b74214f5 cd investigate-gcc-4a960d548b7d7d942f316c5295f6d849b74214f5

# Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts

# Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar... --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar... --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_bmk_ci_gnu-bisect-tcwg_bmk_apm-gnu-master-aar... --fail chmod +x artifacts/test.sh

# Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_bmk-build.sh @@ artifacts/manifests/build-baseline.sh

# Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/

cd gcc

# Reproduce first_bad build git checkout --detach 4a960d548b7d7d942f316c5295f6d849b74214f5 ../artifacts/test.sh

# Reproduce last_good build git checkout --detach 29c92857039d0a105281be61c10c9e851aaeea4a ../artifacts/test.sh

cd .. </cut>

Full commit (up to 1000 lines): <cut> commit 4a960d548b7d7d942f316c5295f6d849b74214f5 Author: Aldy Hernandez aldyh@redhat.com Date: Thu Sep 23 10:59:24 2021 +0200

Avoid invalid loop transformations in jump threading registry.

My upcoming improvements to the forward jump threader make it thread more aggressively. In investigating some "regressions", I noticed that it has always allowed threading through empty latches and across loop boundaries. As we have discussed recently, this should be avoided until after loop optimizations have run their course.

Note that this wasn't much of a problem before because DOM/VRP couldn't find these opportunities, but with a smarter solver, we trip over them more easily.

Because the forward threader doesn't have an independent localized cost model like the new threader (profitable_path_p), it is difficult to catch these things at discovery. However, we can catch them at registration time, with the added benefit that all the threaders (forward and backward) can share the handcuffs.

This patch is an adaptation of what we do in the backward threader, but it is not meant to catch everything we do there, as some of the restrictions there are due to limitations of the different block copiers (for example, the generic copier does not re-use existing threading paths).

We could ideally remove the now redundant bits in profitable_path_p, but I would prefer not to for two reasons. First, the backward threader uses profitable_path_p as it discovers paths to avoid discovering paths in unprofitable directions. Second, I would like to merge all the forward cost restrictions into the profitability class in the backward threader, not the other way around. Alas, that reshuffling will have to wait for the next release.

As usual, there are quite a few tests that needed adjustments. It seems we were quite happily threading improper scenarios. With most of them, as can be seen in pr77445-2.c, we're merely shifting the threading to after loop optimizations.

Tested on x86-64 Linux.

gcc/ChangeLog:

* tree-ssa-threadupdate.c (jt_path_registry::cancel_invalid_paths): New. (jt_path_registry::register_jump_thread): Call cancel_invalid_paths. * tree-ssa-threadupdate.h (class jt_path_registry): Add cancel_invalid_paths.

gcc/testsuite/ChangeLog:

* gcc.dg/tree-ssa/20030714-2.c: Adjust. * gcc.dg/tree-ssa/pr66752-3.c: Adjust. * gcc.dg/tree-ssa/pr77445-2.c: Adjust. * gcc.dg/tree-ssa/ssa-dom-thread-18.c: Adjust. * gcc.dg/tree-ssa/ssa-dom-thread-7.c: Adjust. * gcc.dg/vect/bb-slp-16.c: Adjust. --- gcc/testsuite/gcc.dg/tree-ssa/20030714-2.c | 7 ++- gcc/testsuite/gcc.dg/tree-ssa/pr66752-3.c | 19 ++++--- gcc/testsuite/gcc.dg/tree-ssa/pr77445-2.c | 4 +- gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-18.c | 4 +- gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-7.c | 4 +- gcc/testsuite/gcc.dg/vect/bb-slp-16.c | 7 --- gcc/tree-ssa-threadupdate.c | 67 ++++++++++++++++++----- gcc/tree-ssa-threadupdate.h | 1 + 8 files changed, 78 insertions(+), 35 deletions(-)

diff --git a/gcc/testsuite/gcc.dg/tree-ssa/20030714-2.c b/gcc/testsuite/gcc.dg/tree-ssa/20030714-2.c index eb663f2ff5b..9585ff11307 100644 --- a/gcc/testsuite/gcc.dg/tree-ssa/20030714-2.c +++ b/gcc/testsuite/gcc.dg/tree-ssa/20030714-2.c @@ -32,7 +32,8 @@ get_alias_set (t) } }

-/* There should be exactly three IF conditionals if we thread jumps - properly. */ -/* { dg-final { scan-tree-dump-times "if " 3 "dom2"} } */ +/* There should be exactly 4 IF conditionals if we thread jumps + properly. There used to be 3, but one thread was crossing + loops. */ +/* { dg-final { scan-tree-dump-times "if " 4 "dom2"} } */

diff --git a/gcc/testsuite/gcc.dg/tree-ssa/pr66752-3.c b/gcc/testsuite/gcc.dg/tree-ssa/pr66752-3.c index e1464e21170..922a331b217 100644 --- a/gcc/testsuite/gcc.dg/tree-ssa/pr66752-3.c +++ b/gcc/testsuite/gcc.dg/tree-ssa/pr66752-3.c @@ -1,5 +1,5 @@ /* { dg-do compile } */ -/* { dg-options "-O2 -fdump-tree-thread1-details -fdump-tree-dce2" } */ +/* { dg-options "-O2 -fdump-tree-thread1-details -fdump-tree-thread3" } */

extern int status, pt; extern int count; @@ -32,10 +32,15 @@ foo (int N, int c, int b, int *a) pt--; }

-/* There are 4 jump threading opportunities, all of which will be - realized, which will eliminate testing of FLAG, completely. */ -/* { dg-final { scan-tree-dump-times "Registering jump" 4 "thread1"} } */ +/* There are 2 jump threading opportunities (which don't cross loops), + all of which will be realized, which will eliminate testing of + FLAG, completely. */ +/* { dg-final { scan-tree-dump-times "Registering jump" 2 "thread1"} } */

-/* There should be no assignments or references to FLAG, verify they're - eliminated as early as possible. */ -/* { dg-final { scan-tree-dump-not "if .flag" "dce2"} } */ +/* We used to remove references to FLAG by DCE2, but this was + depending on early threaders threading through loop boundaries + (which we shouldn't do). However, the late threading passes, which + run after loop optimizations , can successfully eliminate the + references to FLAG. Verify that ther are no references by the late + threading passes. */ +/* { dg-final { scan-tree-dump-not "if .flag" "thread3"} } */ diff --git a/gcc/testsuite/gcc.dg/tree-ssa/pr77445-2.c b/gcc/testsuite/gcc.dg/tree-ssa/pr77445-2.c index f9fc212f49e..01a0f1f197d 100644 --- a/gcc/testsuite/gcc.dg/tree-ssa/pr77445-2.c +++ b/gcc/testsuite/gcc.dg/tree-ssa/pr77445-2.c @@ -123,8 +123,8 @@ enum STATES FMS( u8 **in , u32 *transitions) { aarch64 has the highest CASE_VALUES_THRESHOLD in GCC. It's high enough to change decisions in switch expansion which in turn can expose new jump threading opportunities. Skip the later tests on aarch64. */ -/* { dg-final { scan-tree-dump "Jumps threaded: 1[1-9]" "thread1" } } */ -/* { dg-final { scan-tree-dump-times "Invalid sum" 4 "thread1" } } */ +/* { dg-final { scan-tree-dump "Jumps threaded: 9" "thread1" } } */ +/* { dg-final { scan-tree-dump-times "Invalid sum" 1 "thread1" } } */ /* { dg-final { scan-tree-dump-not "optimizing for size" "thread1" } } */ /* { dg-final { scan-tree-dump-not "optimizing for size" "thread2" } } */ /* { dg-final { scan-tree-dump-not "optimizing for size" "thread3" { target { ! aarch64*-*-* } } } } */ diff --git a/gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-18.c b/gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-18.c index 60d4f76f076..2d78d045516 100644 --- a/gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-18.c +++ b/gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-18.c @@ -21,5 +21,7 @@ condition.

All the cases are picked up by VRP1 as jump threads. */ -/* { dg-final { scan-tree-dump-times "Registering jump" 6 "thread1" } } */ + +/* There used to be 6 jump threads found by thread1, but they all + depended on threading through distinct loops in ethread. */ /* { dg-final { scan-tree-dump-times "Threaded" 2 "vrp1" } } */ diff --git a/gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-7.c b/gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-7.c index e3d4b311c03..16abcde5053 100644 --- a/gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-7.c +++ b/gcc/testsuite/gcc.dg/tree-ssa/ssa-dom-thread-7.c @@ -1,8 +1,8 @@ /* { dg-do compile } */ /* { dg-options "-O2 -fdump-tree-thread1-stats -fdump-tree-thread2-stats -fdump-tree-dom2-stats -fdump-tree-thread3-stats -fdump-tree-dom3-stats -fdump-tree-vrp2-stats -fno-guess-branch-probability" } */

-/* { dg-final { scan-tree-dump "Jumps threaded: 18" "thread1" } } */ -/* { dg-final { scan-tree-dump "Jumps threaded: 8" "thread3" { target { ! aarch64*-*-* } } } } */ +/* { dg-final { scan-tree-dump "Jumps threaded: 12" "thread1" } } */ +/* { dg-final { scan-tree-dump "Jumps threaded: 5" "thread3" { target { ! aarch64*-*-* } } } } */ /* { dg-final { scan-tree-dump-not "Jumps threaded" "dom2" } } */

/* aarch64 has the highest CASE_VALUES_THRESHOLD in GCC. It's high enough diff --git a/gcc/testsuite/gcc.dg/vect/bb-slp-16.c b/gcc/testsuite/gcc.dg/vect/bb-slp-16.c index 664e93e9b60..e68a9b62535 100644 --- a/gcc/testsuite/gcc.dg/vect/bb-slp-16.c +++ b/gcc/testsuite/gcc.dg/vect/bb-slp-16.c @@ -1,8 +1,5 @@ /* { dg-require-effective-target vect_int } */

-/* See note below as to why we disable threading. */ -/* { dg-additional-options "-fdisable-tree-thread1" } */ - #include <stdarg.h> #include "tree-vect.h"

@@ -30,10 +27,6 @@ main1 (int dummy) *pout++ = *pin++ + a; *pout++ = *pin++ + a; *pout++ = *pin++ + a; - /* In some architectures like ppc64, jump threading may thread - the iteration where i==0 such that we no longer optimize the - BB. Another alternative to disable jump threading would be - to wrap the read from `i' into a function returning i. */ if (arr[i] = i) a = i; else diff --git a/gcc/tree-ssa-threadupdate.c b/gcc/tree-ssa-threadupdate.c index baac11280fa..2b9b8f81274 100644 --- a/gcc/tree-ssa-threadupdate.c +++ b/gcc/tree-ssa-threadupdate.c @@ -2757,6 +2757,58 @@ fwd_jt_path_registry::update_cfg (bool may_peel_loop_headers) return retval; }

+bool +jt_path_registry::cancel_invalid_paths (vec<jump_thread_edge *> &path) +{ + gcc_checking_assert (!path.is_empty ()); + edge taken_edge = path[path.length () - 1]->e; + loop_p loop = taken_edge->src->loop_father; + bool seen_latch = false; + bool path_crosses_loops = false; + + for (unsigned int i = 0; i < path.length (); i++) + { + edge e = path[i]->e; + + if (e == NULL) + { + // NULL outgoing edges on a path can happen for jumping to a + // constant address. + cancel_thread (&path, "Found NULL edge in jump threading path"); + return true; + } + + if (loop->latch == e->src || loop->latch == e->dest) + seen_latch = true; + + // The first entry represents the block with an outgoing edge + // that we will redirect to the jump threading path. Thus we + // don't care about that block's loop father. + if ((i > 0 && e->src->loop_father != loop) + || e->dest->loop_father != loop) + path_crosses_loops = true; + + if (flag_checking && !m_backedge_threads) + gcc_assert ((path[i]->e->flags & EDGE_DFS_BACK) == 0); + } + + if (cfun->curr_properties & PROP_loop_opts_done) + return false; + + if (seen_latch && empty_block_p (loop->latch)) + { + cancel_thread (&path, "Threading through latch before loop opts " + "would create non-empty latch"); + return true; + } + if (path_crosses_loops) + { + cancel_thread (&path, "Path crosses loops"); + return true; + } + return false; +} + /* Register a jump threading opportunity. We queue up all the jump threading opportunities discovered by a pass and update the CFG and SSA form all at once. @@ -2776,19 +2828,8 @@ jt_path_registry::register_jump_thread (vec<jump_thread_edge *> *path) return false; }

- /* First make sure there are no NULL outgoing edges on the jump threading - path. That can happen for jumping to a constant address. */ - for (unsigned int i = 0; i < path->length (); i++) - { - if ((*path)[i]->e == NULL) - { - cancel_thread (path, "Found NULL edge in jump threading path"); - return false; - } - - if (flag_checking && !m_backedge_threads) - gcc_assert (((*path)[i]->e->flags & EDGE_DFS_BACK) == 0); - } + if (cancel_invalid_paths (*path)) + return false;

if (dump_file && (dump_flags & TDF_DETAILS)) dump_jump_thread_path (dump_file, *path, true); diff --git a/gcc/tree-ssa-threadupdate.h b/gcc/tree-ssa-threadupdate.h index 8b48a671212..d68795c9f27 100644 --- a/gcc/tree-ssa-threadupdate.h +++ b/gcc/tree-ssa-threadupdate.h @@ -75,6 +75,7 @@ protected: unsigned long m_num_threaded_edges; private: virtual bool update_cfg (bool peel_loop_headers) = 0; + bool cancel_invalid_paths (vec<jump_thread_edge *> &path); jump_thread_path_allocator m_allocator; // True if threading through back edges is allowed. This is only // allowed in the generic copier in the backward threader. </cut>