linaro-toolchain

linaro-toolchain@lists.linaro.org

4 participants
5691 discussions

by Michael Hope

Hi there. I've updated the list of potential Summit sessions based on yesterdays call. Could people please check the Sessions table on https://wiki.linaro.org/WorkingGroups/ToolChain/Meetings/2010-10-18 and flesh out the agenda for sessions that have your name against them. The agenda should be five to ten discussion points, preferably of things that are not well understood and could use input from the group. There's a good discussion on what to expect at a Summit here: http://oubiwann.blogspot.com/2010/10/q-the-ubuntu-developer-summits.html You can check the already-approved sessions here: http://summit.ubuntu.com/uds-n/ Feel free to join in to any other sessions you might find interesting. There will be quite a few people with diverse backgrounds there, including ~80 people from Linaro, ~400 from Ubuntu, ~200 from the community, and ~200 remote. The overlap between Toolchain and Ubuntu interests might not be great, so I'll make sure a common work room is available for idle time. -- Michael

15 years, 5 months

Flavoured toolchains anyone?

by Marcin Juszkiewicz

Some of Linaro developers works with ARM devices older then ARMv7-a architecture. Other people experiments with hard-float ABI. Each of them has to rebuild toolchain for own use and that means playing with components to have them build properly. But it is no more - I made some patches and armel-cross-toolchain-base since 1.53 version + newer source packages for gcc-4.[45]-armel-cross have support for "debian/flavour" file which allows to set some flags related to toolchain build. So far supported things are: - ARM architecture - float ABI - FPU mode - Thumb mode This feature is not merged into regular Ubuntu packages yet as this is work in progress which needs to be cleaned first. http://people.linaro.org/~hrw/armel-cross-toolchain/ has all source packages needed. Regards, -- JID: hrw(a)jabber.org Website: http://marcin.juszkiewicz.com.pl/ LinkedIn: http://www.linkedin.com/in/marcinjuszkiewicz

15 years, 5 months

Flavoured toolchains anyone?

by Marcin Juszkiewicz

15 years, 5 months

NEON vectorization: use of specialized load/store instructions

by Julian Brown

I meant to send this to the "external" Linaro toolchain mailing list, not the internal CS one. Apologies to those who receive it twice! In a follow-up message, Joseph Myers pointed out a post he'd written previously on the same subject: http://gcc.gnu.org/ml/gcc-patches/2010-06/msg00409.html In further followups (at the risk of misrepresenting Joseph & Paul Brook's opinions!), there seemed to be general agreement that a scheme something like that outlined below, with "permuting" loads/stores and some way of handling multiple in-register layouts for vectors seems like it will be a necessary addition to the vectorizer, going forward. Julian Begin forwarded message: Date: Thu, 7 Oct 2010 16:45:17 +0100 From: Julian Brown <julian(a)codesourcery.com> To: Ira Rosen <IRAR(a)il.ibm.com> Cc: Tejas Belagod <Tejas.Belagod(a)arm.com>, Linaro List <gnu-linaro-tools(a)codesourcery.com> Subject: [gnu-linaro-tools] NEON vectorization: use of specialized load/store instructions Hi, We're having some system issues, so I thought I'd take the chance to write down some things I've been thinking about re: utilising the NEON load/store instructions more effectively. I've also attempted to summarize the problems with big-endian mode. All unverified as of yet, so please take with a pinch of salt :-). Comments appreciated. It's been a while since I last thought about some of this stuff... Cheers, Julian Use of specialized load instructions ==================================== To provide good support for NEON's element and structure load/store instructions, GCC lacks support for a couple of key features: 1. A good way of representing a set of two, three or four vector registers (either D- or Q-sized), possibly with non-unit stride. 2. A generalised mapping between memory locations and lane numbers. To start with point 1: currently the element and structure load/store instructions are only supported via intrinsics. These are specified to load and store as if going via an array embedded in a union, i.e.: typedef struct int8x8x2_t { int8x8_t val[2]; } int8x8x2_t; __extension__ static __inline int8x8x2_t __attribute__ ((__always_inline__)) vld2_s8 (const int8_t * __a) { union { int8x8x2_t __i; __builtin_neon_ti __o; } __rv; __rv.__o = __builtin_neon_vld2v8qi ((const __builtin_neon_qi *) __a); return __rv.__i; } Even for a trivial test program, e.g.: #include <arm_neon.h> int foo (int8_t *x) { int8x8x2_t result = vld2_s8 (x); return vget_lane_s8 (result.val[0], 1); } We will generate code like so: sub sp, sp, #32 vld2.8 {d16-d17}, [r0] mov r3, sp vstmia sp, {d16-d17} add ip, sp, #16 ldmia r3, {r0, r1, r2, r3} stmia ip, {r0, r1, r2, r3} fldd d16, [sp, #16] vmov.s8 r0, d16[1] add sp, sp, #32 bx lr I.e., rather than being used directly, the registers loaded by vld2 will always be spilled to the stack then reloaded. This obviously reduces the usefulness of these intrinsics by a large factor. With some planning, it'd be good to find a powerful enough solution to this problem so that the same representation for multiple registers can be used by the autovectorizer as well as the intrinsic-handling code. (One difficulty is that the "foo.val[X]" interface should still be available to user code. There's probably no need for "val" to literally be an array, though other representations would require front-end changes). Assuming it's hard for the register allocator to deal with highly-constrained situations like requiring four consecutive registers, one (ugly) possibility might be to run a pass before register allocation, looking for "big" multi-register vectors and pre-allocating them to hard registers. Even using a fixed allocation of a single set of registers (e.g. make it so that all multi-reg loads/stores larger than a Q register must use d0-d7, or whatever) would probably give better code than what we produce at present, in most cases. Now, point 2. To start with, an aside: AIUI, there is currently an assumption in the vectoriser code that increasing element numbers in vector registers correspond to increasing addresses when those registers are loaded from and stored to memory (as if the vector was a short array, or alternatively as if a union of the vector register and an array of element-types had the same numberings for lanes and array indices corresponding to the same elements). Unfortunately that is only true for NEON in little-endian mode: in big-endian mode, the story is more complicated, for reasons I will try to explain. To remain compliant with the soft-float variant of the ARM EABI, we must pass vector register arguments in ARM registers (or the stack), not vector registers. This means that we must be very careful with the ordering of elements for values passed to functions. Consider the trivial function: int __attribute__((noinline)) qux (int16x8_t x) { x = vaddq_s16 (x, x); return vgetq_lane_s16 (x, 1); } This is compiled by GCC to the following (slightly unimpressively): vmov d18, r1, r0 @ v8hi vmov d19, r3, r2 vmov d20, r1, r0 @ v8hi vmov d21, r3, r2 vadd.i16 q8, q9, q10 vmov.s16 r0, d16[1] bx lr Which may then be called like, e.g.: ldmia sp, {r0-r3} blx qux So: notice that we're careful that when vector values are transferred from NEON registers to core registers, the same result will be transferred to/from memory when we use ldm/stm (core registers) or vldm/vstm (vector registers) -- i.e. we might use "vldm rX, {d18-d19}", storing d18 and d19 in consecutive increasing addresses, or "ldmia rX, {r0-r3}", again with consecutive registers in increasing memory locations, and we get the same outcome. The fact that we can use the multiple-register loads/stores is also important for spilling/reloading between vector and core registers, which inevitably happens occasionally. Notice also that when we call the above function like so: typedef union { int16x8_t quadvec; int16_t half[8]; } u; int foo (int8_t *x) { u bar; int i; for (i = 0; i < 8; i++) bar.half[i] = i; qux (bar.quadvec); } The value returned from "qux" is NOT 2 (1+1), as it would be if we were accessing the value at index 1 in the superimposed array in the union "u". The vgetq_lane_s16 call still interprets the array as if it had been loaded in little-endian element order. But we don't get the result we would have if the vector had been interpreted in purely big-endian order either (i.e. 12, 6+6)! In fact from the perspective of the element numbering used by vgetq_lane_s16, the vector elements we see for each of the (equal) operands of the "vadd" instruction in the qux function are: equiv. core register lane number (at function entry) value ----------- -------------------- ----- [0] high part of r1 3 [1] low part of r1 2 [2] high part of r0 1 [3] low part of r0 0 [4] high part of r3 7 [5] low part of r3 6 [6] high part of r2 5 [7] low part of r2 4 So the value returned will be 2+2, 4. Now, coming back to the vectorizer. Current practice means that increasing element numbers should correspond to increasing memory locations: i.e., that "array ordering" is in effect, just as in the call to vgetq_lane_s16 in the above example. This leads to an anomaly: it means that when the vectorizer asks for a particular element, it will generally get a different one. Most of the time we get away with this, since the vectorizer mostly deals with "opaque" vectors which are operated on element-wise: i.e. we only deal with data at the granularity of whole vectors, so it doesn't matter which order the elements are in. The ARM implementations of reduction operations fortuitously calculate the results across all elements simultaneously, so when one of those elements is extracted, we still get the right answer. One notable exception to this though is the movmisalign<mode> patterns: these are implemented using the vld1 and vst1 instructions, which load elements in "array" order (increasing elements from increasing memory locations), even in big-endian mode. Since vectors loaded using those instructions are "incompatible" with the above scheme, such misaligned accesses are simply disabled in big-endian mode. Of course, generally, sticking with the current non-solution in big-endian mode is not sustainable (and is probably already broken in various cases). So it might be worth thinking about whether supporting big-endian mode properly, as well as handling the more complex load and store element/structure instructions, can be done using some generalised solution. I'm thinking (without having much idea about how feasible such an idea is) of something along the lines of a function (in the mathematical sense) attached to each vector value manipulated by the vectorizer, to map that value's element numberings to and from memory offsets. So then the quad-word vector of 16-bit elements discussed above would look like, in big-endian mode: foo, {6, 4, 2, 0, 14, 12, 10, 8} Whereas in little-endian mode (or in big-endian mode, for vectors loaded using vld1), it would look like: foo, {0, 2, 4, 6, 8, 10, 12, 14} And then, perhaps more interestingly, a vector loaded using e.g. a "multiple 3-element structures" load, vld3.16 {d1, d2, d3}, [rN] Might look like (in either endianness, assuming we can represent a vector of such size in our hypothetical scheme): foo, {0, 6, 12, 18, 2, 8, 14, 20, 4, 10, 16, 22} Though it's not clear that such a scheme would be powerful enough to represent the whole range of element/structure loads/stores available (you'd probably need to be able to specify skipped or don't-care elements to do that, at least).

15 years, 5 months

Plan of CS304: Thumb2 tuning investigation

by Yao Qi

First of all, the goal of this work is about investigation on speed improvement on linaro gcc 4.5. Finally, the output/result of this work is to list all possible recommendations/actions to improve speed on linaro 4.5. Comments to this plan are welcome. So far, we can improve speed in three ways, 1. Backport patches from FSF GCC 4.6. Note that we don't want to backport the whole 4.6. 2. Benchmark with FSF GCC 4.5.0. Fix performance regressions if there are on linaro gcc 4.5. Output is the reason of performance regression, or even further, give recommendations on how to fix it. 3. Study the code generated by other ARM compilers, and give recommendations on how to improve GCC to do better job. I'll describe these three ways in details in the following sections, - Backport patches from FSF GCC 4.6 I went through gcc-patches archive, and select several patches that are helpful to code improvements. 1 ifcvt optimization. Target independent. http://gcc.gnu.org/ml/gcc-patches/2010-04/msg00832.html 2 redundant register move for sign extending. Thumb2. http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43137 3. PR 45335 Use ldrd and strd to access two consecutive words. Not yet approved. http://gcc.gnu.org/ml/gcc-patches/2010-09/msg00059.html 4. Fix an if statement in arm_rtx_costs_1. http://gcc.gnu.org/ml/gcc-patches/2010-07/msg02096.html 5. Reduce code duplication for Thumb2 move patterns http://gcc.gnu.org/ml/gcc-patches/2010-07/msg00624.html 6. ARM ldm/stm peepholes http://gcc.gnu.org/ml/gcc-patches/2010-07/msg00512.html 7. PR44999 Replace "and r0, r0, #255" with uxtb in thumb2 http://gcc.gnu.org/ml/gcc-patches/2010-07/msg01700.html 8. Improve optimization to transform TST into LSLS http://gcc.gnu.org/ml/gcc-patches/2010-06/msg02518.html 9. Fix bswap patterns for ARM / Thumb and Thumb2. http://gcc.gnu.org/ml/gcc-patches/2010-01/msg01238.html - Fix speed regression I found speed regression on EEMBC on linaro 4.5, compared with FSF GCC 4.5.0, and I'll investigate why speed regression happens on these cases. Here is a table below about speed regression compared between FSF GCC 4.5.0 and Linaro GCC 4.5 (revno:99398) O2 O3 puwmod01, -5.5 -3.5 bitmnp01, -7.9 -0.7 routelookup, -6.4 -8.2 conven00data_1, -7.2 -5.8 conven00data_2, -8.1 -7.3 conven00data_3, -6.6 -5.5 viterb00data_1, -1.7 +5.9 viterb00data_2, -4.3 +2.6 viterb00data_3, -2.3 +1.8 viterb00data_4, -5.3 -0.3 - Study the code generated by other ARM compilers. In this part, I'll study the binary generated by other ARM compilers, and try to teach GCC smart enough to do the same thing. This piece of work is quite open, and hard to estimate how much output we could get. -- Yao Qi CodeSourcery yao(a)codesourcery.com (650) 331-3385 x739

15 years, 5 months

Gcc test suite failures

by Nicolas Pitre

People here might want to have a look at this bug: http://gcc.gnu.org/bugzilla/show_bg.cgi?id=45979 Note that the heap randomization feature added to the kernel was part of a Linaro security blueprint. Nicolas

15 years, 5 months

Linaro Toolchain 2010.10 release

by Michael Hope

The Linaro Toolchain Working Group is pleased to announce the 2010.10 consolidation release including Linaro GCC 4.4, Linaro GCC 4.5, and the first version of Linaro GDB 7.2. Linaro GDB 7.2 2010.10-0 is the first release in the 7.2 series. Based off the latest GDB 7.2, it includes a number of ARM-focused bug fixes and enhancements. Interesting changes include: * Backtraces in Thumb-2 code are significantly improved * Much better prologue and epilogue parsing * Improved software watchpoint support * Many test suite tidy-ups Linaro GCC 4.5 is the third release in the 4.5 series. Based off the latest GCC 4.5.1+svn, it includes many ARM-focused performance improvements and bug fixes. Linaro GCC 4.4 is the fourth release in the 4.4 series. Based off the latest GCC 4.4.5, it fixes many of the issues found during building Ubuntu over the last few months. Interesting changes include: * Linaro GCC 4.4 is now based off FSF GCC 4.4.5 * Cortex A8 and Cortex A9 scheduler NEON improvements * Better code generation for constant addresses with inline assembly * Better code for copying small constant strings * Various correctness improvements Downloads are available from the Linaro GCC and GDB pages on Launchpad: https://launchpad.net/gcc-linaro https://launchpad.net/gdb-linaro -- Michael

15 years, 5 months

DCC device driver and gdb server

by Øyvind Harboe

Hi all, I was wondering someone knows about a ARM DCC (debug communications channel) device driver. The idea is to run gdbserver on /dev/dcc such that application debugging does not hog a serial/ethernet port. I'd modify OpenOCD to forward the DCC onto a TCP/IP port to connect GDB to the gdbserver. -- Øyvind Harboe US toll free 1-866-980-3434 / International +47 51 63 25 00 http://www.zylin.com/zy1000.html ARM7 ARM9 ARM11 XScale Cortex JTAG debugger and flash programmer

15 years, 5 months

New Linaro Toolchain meeting covering American timezones

by Michael Hope

(cc'ed to linaro-toolchain, bcc'ed to others who may be interested) I'm considering adding a new Linaro Toolchain meeting to cover people in the North/South American timezones. We've got quite a few people in that area who are interested in the toolchain but can't make the current 0900 UTC calls. How about a weekly half-hour call on Wednesdays at 1800 UTC? Once daylight savings drops out on the 7th of November, this would be 1000 Sacramento/PST, 1200 Houston/CST, and a reasonable evening time for those in Europe who wish to join. This will be a technical call and can cover topics such as status updates, release plans, reported problems, and any input from toolchain users. Please send me an email if you are interested, -- Michael

15 years, 6 months

System directories when cross-compiling

by Michael Hope

Hi Marcin. Would you consider passing --enable-poison-system-directories to the cross compiler configure? This makes the '-Wpoison-system-directories' option available which warns you if the cross compiler picks up a library or header file from /usr instead of the cross-build environment. I'm talking with someone who's looking at using the Linaro compiler and had a strange error due to picking up the host crtn.o. Having this warning would of tracked down the problem faster. -- Michael

15 years, 6 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain