linaro-toolchain

linaro-toolchain@lists.linaro.org

5659 discussions

Start a nNew thread

[Linaro-TCWG-CI] glibc-2.38.9000-226-g582383b37d: FAIL: 1 regressions: 2 progressions on arm

by ci_notify＠linaro.org

2 years

[Linaro-TCWG-CI] glibc-2.38.9000-225-g02976a4a4b: FAIL: 45 regressions on arm

by ci_notify＠linaro.org

2 years

[ACTIVITY] Report for week #44

by Thiago Jung Bauermann

Hello, # TCWG CI - Working on Abe change to always add detected flaky tests to the flaky.xfail file, even if they are already present in the baseline results. Sent a few versions of Gerrit review request already. # [GNU-981] FEAT_GCS (Guarded Control Stack) support in GDB - Prepared environment to develop and test GDB: built Linux kernel from Mark Brown's arm64-gcs branch and booted it in an Arm FVP supporting the feature. Successfully ran native GDB in it to debug a program (though I didn't use any GCS feature for this test). -- Thiago

2 years

[Linaro-TCWG-CI] v8.1.0-2321-gee95fae075: FAIL: 25 regressions on aarch64

by ci_notify＠linaro.org

2 years

[ACTIVITY] report week ending 3 Nov

by Peter Maydell

Progress: * UM-2 [QEMU upstream maintainership] - investigated and fixed a few bugs in FEAT_MOPS; patches sent - reviewed patch fixing bug in virt ACPI table for debug UART; added the necessary update-the-reference-files patches for 'make check'. Debugged why it broke console output on Linux -- turns out that Linux has a bug where acpi_parse_spcr() and pl011_console_match() disagree about how the former should tell the latter "use 16-bit MMIO"... We'll work around this by having the ACPI table report 32-bit MMIO; Raspberry Pi 4 firmware on real hardware already does that, so it should be a safe choice. - sent patch fixing failure to report BTI GP state correctly when doing a two-stage page table walk - code review and assembly of a pull request (softfreeze next week...) * QEMU-292 [ARMv8.3 FEAT_NV, Nested Virtualization] - got to a (hopefully) code-complete but untested state; will probably put this to one side for the moment leading up to softfreeze - tracked down the kernel and kvmtool patchsets that will be needed to test this (they are not upstream yet) thanks -- PMM

2 years

[Linaro-TCWG-CI] gcc-14-5059-gd880e093d92: Failure on aarch64

by ci_notify＠linaro.org

Dear contributor, our automatic CI has detected problems related to your patch(es). Please find some details below. If you have any questions, please follow up on linaro-toolchain(a)lists.linaro.org mailing list, Libera's #linaro-tcwg channel, or ping your favourite Linaro toolchain developer on the usual project channel. In CI config tcwg_kernel/gnu-master-aarch64-mainline-allyesconfig after: | commit gcc-14-5059-gd880e093d92 | Author: Martin Uecker <uecker(a)tugraz.at> | Date: Thu Jul 27 13:36:05 2023 +0200 | | c: Add Walloc-size to warn about insufficient size in allocations [PR71219] | | Add option Walloc-size that warns about allocations that have | insufficient storage for the target type of the pointer the | storage is assigned to. Added to Wextra. | | PR c/71219 | ... 14 lines of the commit log omitted. Results changed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 22669 # First few build errors in logs: # 00:33:49 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c:241:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]’} with size ‘8’ [-Werror=alloc-size] # 00:33:49 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c:327:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]’} with size ‘8’ [-Werror=alloc-size] # 00:33:49 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:368:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]’} with size ‘8’ [-Werror=alloc-size] # 00:33:49 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:465:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]’} with size ‘8’ [-Werror=alloc-size] # 00:33:50 make[6]: *** [scripts/Makefile.build:243: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.o] Error 1 # 00:33:52 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.c:203:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]’} with size ‘8’ [-Werror=alloc-size] # 00:33:53 make[6]: *** [scripts/Makefile.build:243: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.o] Error 1 # 00:33:53 make[6]: *** [scripts/Makefile.build:243: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.o] Error 1 # 00:33:56 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c:144:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]’} with size ‘8’ [-Werror=alloc-size] # 00:33:57 make[6]: *** [scripts/Makefile.build:243: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.o] Error 1 From # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 22751 # linux build successful: all The configuration of this build is: CI config tcwg_kernel/gnu-master-aarch64-mainline-allyesconfig -----------------8<--------------------------8<--------------------------8<-------------------------- The information below can be used to reproduce a debug environment: Current build : https://ci.linaro.org/job/tcwg_kernel--gnu-master-aarch64-mainline-allyesco… Reference build : https://ci.linaro.org/job/tcwg_kernel--gnu-master-aarch64-mainline-allyesco… Reproduce last good and first bad builds: https://git-us.linaro.org/toolchain/ci/interesting-commits.git/plain/gcc/sh… Full commit : https://github.com/gcc-mirror/gcc/commit/d880e093d92084f55b10626610ef059fd9… Latest bug report status : https://linaro.atlassian.net/browse/GNU-990 List of configurations that regressed due to this commit : * tcwg_kernel ** gnu-master-aarch64-mainline-allyesconfig *** Failure *** https://git-us.linaro.org/toolchain/ci/interesting-commits.git/plain/gcc/sh… *** https://ci.linaro.org/job/tcwg_kernel--gnu-master-aarch64-mainline-allyesco…

2 years

Re: [Linaro-TCWG-CI] v6.6-rc1-17-g1c6fdbd8f246: Failure on arm

by Nick Desaulniers

On Wed, Nov 1, 2023 at 7:42 AM <ci_notify(a)linaro.org> wrote: > > Dear contributor, our automatic CI has detected problems related to your patch(es). Please find some details below. If you have any questions, please follow up on linaro-toolchain(a)lists.linaro.org mailing list, Libera's #linaro-tcwg channel, or ping your favourite Linaro toolchain developer on the usual project channel. > > In CI config tcwg_kernel/llvm-master-arm-mainline-allmodconfig after: ok, so ARCH=arm allmodconfig on mainline... > > | commit v6.6-rc1-17-g1c6fdbd8f246 > | Author: Kent Overstreet <kent.overstreet(a)gmail.com> > | Date: Thu Mar 16 22:18:50 2017 -0800 > | > | bcachefs: Initial commit > | > | Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write > | filesystem with every feature you could possibly want. > | > | Website: https://bcachefs.org > | > | ... 1 lines of the commit log omitted. > > Results changed to > # reset_artifacts: > -10 > # build_abe binutils: > -9 > # build_kernel_llvm: > -5 > # build_abe qemu: > -2 > # linux_n_obj: > 23730 > # First few build errors in logs: > > # 00:23:16 fs/bcachefs/btree_cache.h:45:43: error: array index 0 is past the end of the array (that has type 'const __u64[0]' (aka 'const unsigned long long[0]')) [-Werror,-Warray-bounds] > # 00:23:17 fs/bcachefs/alloc.c:332:9: error: call to undeclared function 'COUNT_ARGS'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] ^ $ file fs/bcachefs/alloc.c fs/bcachefs/alloc.c: cannot open `fs/bcachefs/alloc.c' (No such file or directory) > # 00:23:17 make[4]: *** [scripts/Makefile.build:243: fs/bcachefs/alloc.o] Error 1 > # 00:23:29 fs/bcachefs/btree_cache.h:45:43: error: array index 0 is past the end of the array (that has type 'const __u64[0]' (aka 'const unsigned long long[0]')) [-Werror,-Warray-bounds] > # 00:23:30 make[4]: *** [scripts/Makefile.build:243: fs/bcachefs/bset.o] Error 1 ^ $ make LLVM=1 ARCH=arm allmodconfig fs/bcachefs/bset.o CC [M] fs/bcachefs/bset.o $ > # 00:23:33 fs/bcachefs/btree_cache.h:45:43: error: array index 0 is past the end of the array (that has type 'const __u64[0]' (aka 'const unsigned long long[0]')) [-Werror,-Warray-bounds] > # 00:23:33 fs/bcachefs/btree_cache.h:45:43: error: array index 0 is past the end of the array (that has type 'const __u64[0]' (aka 'const unsigned long long[0]')) [-Werror,-Warray-bounds] > # 00:23:33 fs/bcachefs/btree_cache.c:67:9: error: array index 0 is past the end of the array (that has type 'const __u64[0]' (aka 'const unsigned long long[0]')) [-Werror,-Warray-bounds] > # 00:23:33 fs/bcachefs/btree_cache.c:120:2: error: array index 0 is past the end of the array (that has type '__u64[0]' (aka 'unsigned long long[0]')) [-Werror,-Warray-bounds] > # 00:23:33 fs/bcachefs/btree_cache.c:201:6: error: array index 0 is past the end of the array (that has type 'const __u64[0]' (aka 'const unsigned long long[0]')) [-Werror,-Warray-bounds] $ make LLVM=1 ARCH=arm allmodconfig fs/bcachefs/btree_cache.o CC [M] fs/bcachefs/btree_cache.o $ ... what's up with this report? > > From > # reset_artifacts: > -10 > # build_abe binutils: > -9 > # build_kernel_llvm: > -5 > # build_abe qemu: > -2 > # linux_n_obj: > 32815 > # linux build successful: > all > # linux boot successful: > boot > > The configuration of this build is: > CI config tcwg_kernel/llvm-master-arm-mainline-allmodconfig > > -----------------8<--------------------------8<--------------------------8<-------------------------- > The information below can be used to reproduce a debug environment: > > Current build : https://ci.linaro.org/job/tcwg_kernel--llvm-master-arm-mainline-allmodconfi… > Reference build : https://ci.linaro.org/job/tcwg_kernel--llvm-master-arm-mainline-allmodconfi… > > Reproduce last good and first bad builds: https://git-us.linaro.org/toolchain/ci/interesting-commits.git/plain/linux/… > > Full commit : https://git.linaro.org/kernel-org/linux.git/commit/?id=1c6fdbd8f2465ddfb73a… > > Latest bug report status : https://linaro.atlassian.net/browse/LLVM-1015 > > List of configurations that regressed due to this commit : > * tcwg_kernel > ** llvm-master-arm-mainline-allmodconfig > *** Failure > *** https://git-us.linaro.org/toolchain/ci/interesting-commits.git/plain/linux/… > *** https://ci.linaro.org/job/tcwg_kernel--llvm-master-arm-mainline-allmodconfi… -- Thanks, ~Nick Desaulniers

2 years

Re: [Linaro-TCWG-CI] gcc-14-5032-ge3da1d7bb28: Failure on arm

by Maxim Kuvyrkov

Hi Richard, This patch also breaks profiled_bootstrap on aarch64-linux-gnu, which may be easier to reproduce, see [1]. [1] https://git-us.linaro.org/toolchain/ci/interesting-commits.git/plain/gcc/sh… Regards, -- Maxim Kuvyrkov https://www.linaro.org > On Nov 1, 2023, at 15:46, ci_notify(a)linaro.org wrote: > > Dear contributor, our automatic CI has detected problems related to your patch(es). Please find some details below. If you have any questions, please follow up on linaro-toolchain(a)lists.linaro.org mailing list, Libera's #linaro-tcwg channel, or ping your favourite Linaro toolchain developer on the usual project channel. > > In bootstrap_build master-arm-bootstrap_profiled_lto_lean after: > > | commit gcc-14-5032-ge3da1d7bb28 > | Author: Richard Biener <rguenther(a)suse.de> > | Date: Tue Oct 31 10:13:13 2023 +0100 > | > | tree-optimization/112305 - SCEV cprop and conditional undefined overflow > | > | The following adjusts final value replacement to also rewrite the > | replacement to defined overflow behavior if there's conditionally > | evaluated stmts (with possibly undefined overflow), not only when > | we "folded casts". The patch hooks into expression_expensive for > | this. > | ... 10 lines of the commit log omitted. > > Results changed to > # reset_artifacts: > -10 > # true: > 0 > # build_abe bootstrap_profiled_lto_lean: > # FAILED > # First few build errors in logs: > # 01:55:54 /home/tcwg-buildslave/workspace/tcwg_gnu_4/abe/snapshots/gcc.git~master/libiberty/regex.c:5549: internal compiler error: Segmentation fault > # 01:55:54 make[4]: *** [/tmp/ccj2LJs3.mk:380: /tmp/ccIWXeRO.ltrans126.ltrans.o] Error 1 > # 01:57:45 lto-wrapper: fatal error: make returned 2 exit status > # 01:57:46 /usr/bin/ld: error: lto-wrapper failed > # 01:57:46 collect2: error: ld returned 1 exit status > # 01:57:46 make[3]: *** [/home/tcwg-buildslave/workspace/tcwg_gnu_4/abe/snapshots/gcc.git~master/gcc/cp/Make-lang.in:145: cc1plus] Error 1 > # 01:57:46 make[2]: *** [Makefile:5260: all-stagefeedback-gcc] Error 2 > # 01:57:46 make[1]: *** [Makefile:26669: stagefeedback-bubble] Error 2 > # 01:57:46 make: *** [Makefile:26689: profiledbootstrap] Error 2 > # 00:06:15 make[3]: [Makefile:1822: armv8l-unknown-linux-gnueabihf/bits/largefile-config.h] Error 1 (ignored) > # 00:47:56 make[3]: [Makefile:1822: armv8l-unknown-linux-gnueabihf/bits/largefile-config.h] Error 1 (ignored) > # 01:09:35 make[3]: [Makefile:1822: armv8l-unknown-linux-gnueabihf/bits/largefile-config.h] Error 1 (ignored) > # 01:14:05 /home/tcwg-buildslave/workspace/tcwg_gnu_4/abe/snapshots/gcc.git~master/libiberty/regex.c:5549:1: internal compiler error: Segmentation fault > # 01:14:05 /home/tcwg-buildslave/workspace/tcwg_gnu_4/abe/snapshots/gcc.git~master/libiberty/regex.c:5549:1: internal compiler error: Segmentation fault > # 01:14:05 /home/tcwg-buildslave/workspace/tcwg_gnu_4/abe/snapshots/gcc.git~master/libiberty/regex.c:5549:1: internal compiler error: Segmentation fault > # 01:14:05 make[4]: *** [/tmp/ccCI7mJj.mk:20: /tmp/ccH1y1BV.ltrans6.ltrans.o] Error 1 > # 01:14:05 make[4]: *** [/tmp/cciXJOsB.mk:20: /tmp/ccaXf4f5.ltrans6.ltrans.o] Error 1 > # 01:14:05 make[4]: *** [/tmp/cccYndDm.mk:20: /tmp/cc6tlPuq.ltrans6.ltrans.o] Error 1 > # 01:14:07 lto-wrapper: fatal error: make returned 2 exit status > > From > # reset_artifacts: > -10 > # true: > 0 > # build_abe bootstrap_profiled_lto_lean: > 1 > > The configuration of this build is: > CI config tcwg_bootstrap_build/master-arm-bootstrap_profiled_lto_lean > > -----------------8<--------------------------8<--------------------------8<-------------------------- > The information below can be used to reproduce a debug environment: > > Current build : https://ci.linaro.org/job/tcwg_bootstrap_build--master-arm-bootstrap_profil… > Reference build : https://ci.linaro.org/job/tcwg_bootstrap_build--master-arm-bootstrap_profil… > > Reproduce last good and first bad builds: https://git-us.linaro.org/toolchain/ci/interesting-commits.git/plain/gcc/sh… > > Full commit : https://github.com/gcc-mirror/gcc/commit/e3da1d7bb288c8c864f0284bc4bc5877b4… > > Latest bug report status : https://linaro.atlassian.net/browse/GNU-989 > > List of configurations that regressed due to this commit : > * tcwg_bootstrap_build > ** master-arm-bootstrap_profiled_lto_lean > *** Failure > *** https://git-us.linaro.org/toolchain/ci/interesting-commits.git/plain/gcc/sh… > *** https://ci.linaro.org/job/tcwg_bootstrap_build--master-arm-bootstrap_profil…

2 years

[ACTIVITY] Report for week #43

by Philippe Mathieu-Daudé

Progress: * QEMU-610 [Remove qemu_get_cpu() from hardware models] - Big rework of Cortex-A MPCore models. A common class is now used and various duplicated code from ARM boards got removed. Possible follow-up with QEMU-601 [Implement TYPE_CORTEXR52_PRIV].

2 years, 1 month

[ACTIVITY] Report for week #43

by Thiago Jung Bauermann

Hello, # [GNU-981] FEAT_GCS (Guarded Control Stack) support in GDB - Started working on this feature. Currently adding ptrace and core file support for the NT_ARM_GCS regset. # Upstream community - Implemented fix for ‘--with-auto-load-dir’ and ‘--with-auto-load-safe-path’ configure options on Windows (since Eli mentioned it earlier this month) and posted “[PATCH] gdb/configure.ac: Fix auto-load options to work with Windows path separator”. -- Thiago

2 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain