linaro-toolchain

linaro-toolchain@lists.linaro.org

2 participants
5705 discussions

by Rob Savoye

== Progress == * Attended Connect, did presentation and other stuff. * Left Connect early to attend the Gnu Tool Cauldron. Ran BOF on testing the toolchain, attended many talks including the one on Graphite. * Worked on modularizing cbuildv2 package parsing into functions so bzr,svn,git URLs and tarball snapshots from toolchain64 work the same. * Added LLVM support to cbuildv2, Clang and the testsuites only work if built separately for now. * Reproduced build problem Viswanath was having with crosstool, Zhenqiang knew the missing package(s) that kept C++ builds from working. * Built fsf 4.7 and 4.8 as well as Linaro GCC releases for July on Panda board. * Got spec200 benchmarks working on panda, ran them for the above branches and releases. == Plans == * Help Charlie come up to speed on building GCC. * Run more benchmarks on the above branches and do graphs on performance. * See why for me on a panda, all the tests fail with make check. * Find time to work on cbuild2 so Charlie can beta test it sometime soon. - rob -

12 years, 9 months

[ACTIVITY] Week 29

by Zhenqiang Chen

== Issues == * None == Progress == * Enable multi-arch for Linaro aarch64-linux-gnu build. - Configure gcc with --enable-multiarch. - Backport eglibc patches for rtlddir. - Configure eglibc to set libdir, slibdir and rtlddir. * Follow up the patch for pr57637. * Reassociate X == CST1 || X == CST2 if popcount (CST2 - CST1) == 1 into ((X - CST1) & ~(CST2 - CST1)) == 0. - Test is ongoing. * Rebase conditional compare changes to trunk. == Leave == * July 17. == Plan == * Send out the conditional compare changes for Linaro internal review.

12 years, 9 months

[ACTIVITY] Week 29

by Renato Golin

== Progress == Short week (3 days) * Divmod - Finished most of the work, patch upstream (r186390) - Trying to lower remainder as divmod without sacrificing the div+mod merge during legalization * Buildbots - One panda fails even at 920MHz, replaced with a new one - Using decent power supplies now, should work a whole week - Lab config is messed up, need to start from scratch - Failed at 920MHz with decent power supply - Giving up on Pandas as buildbots... * Background - Not many code reviews last two weeks, as Connect and the Pandas took most of my spare time - Test-suite's Lencod bug fixed upstream, no more need of dirty hacks on stack offset calculation == Plan == * Continue on divmod lowering, finding a way to merge Custom with Expand lowering, so not to break the div+rem merge during legalization, but still lower divmod as Custom. 64-bit types still use them. * Study cross-compilation issues in Clang and LLVM, prepare a document on how it works (or not), and what paths we can take to make it better in the short/medium term. * Follow up on Phoronix results and CBuild2 benchmarks, time allowing

12 years, 9 months

[ACTIVITY] Week 29

by Will Newton

== Progress == * Investigating glibc stack guard support * Developed initial patches * Raised ABI issue * More malloc work * Integrated tcmalloc into benchmark framework * Improved benchmark repeatability * Added Python benchmark script and graphing script * Respin and commit gdb TLS testsuite patch (my gdb patch queue now empty) * Committed two of Omair's gdb patches == Issues == * None. == Plan == * Produce some malloc benchmark graphs * Progress the stack guard work * Start writing some malloc code -- Will Newton Toolchain Working Group, Linaro

12 years, 9 months

[ACTIVITY] report week 28, 29

by Peter Maydell

Progress: * attended Linaro Connect (wk 28) * sent pull requests for target-arm/arm-devs queues * resent virtio-mmio patchset; this is now ready for commit and I will send a pullreq with it in next week * finished off a cleanup of linux-user to remove the support for configuring targets without threading support * resorted todo list against cards * started on getting v7 mach-virt into shape for upstreaming -- PMM

12 years, 9 months

Support for ARMV5te

by Ratheendran R

Hi All, I am new to linaro. so would like to know more about linaro. Is linero alternative to yocto project. does the tool chain support armv5te based SOC. Ratheendran

12 years, 9 months

Overheating Pandas

by Renato Golin

Hi Folks, I'm running two buildbots here at home and am getting consistent failures from the Pandas because of overheating. I've set up a monitor that will tell me the current CPU temperature and the allowed maximum, and when the bot passes 90%, it shuts itself off. The problem is that I'm running with heat-sinks and the boards are on top of three fans, so there really isn't much more I can do to solve this problem. I personally think this is a hardware problem, since everything is in the same die, CPU, GPU and RAM, and the physical dimensions of the chip are quite small. I remember when Intel started overheating (around 486DX66) and the die was huge (more head dissipation), plus RAM and GPU were separate, and it still needed a hefty heat-sink. It's true that gates are far smaller today, but it's not true that a dual core 1.3GHz + GPU + RAM will produce less heat on a small die than a 66KHz CPU on a huge die, so why anyone think it's a good idea to release a 1+GHz chip without *any* form of heat dissipation is beyond my comprehension. Manufacturers only got away with it, so far, because people rarely use 100% of the CPU power for extended periods of time, because ARM devices end up as set-top boxes, mobile phones and tablets. However, even those devices will heat up when playing 2 h films or games, and they do have some form of heat sink. We, at the toolchain group, make things worse by using 100% CPU, 24 / 7, something that Panda boards, or Arndales were not designed to do. However, with ARM moving into the server space, their designs will have to be re-thought, and what a better place than Linaro for making sure we get it right? For the time being, I believe we *must* have air conditioning in the Lab all the time, and we *must* have heat-sinks on every board, and we *must* monitor the CPU temperature of the boards, at least until we're comfortable that they're not failing all the time. Can we make a temperature monitor (like the one attached) a default feature on Linaro Ubuntu distributions? We could dump that info to the syslog/dmesg whenever it crosses the (say) 75% threshold, and report more often when it crosses the 95%, possibly dumping the processe(s) that are consuming more CPU at the time, to enable post-mortem debugging. cheers, --renato As a side note, the quad-A9 ODroid does ship with a massive heat-sink, which also serves as a fancy case. Quite clever, really.

12 years, 9 months

[SPAM] $99 A9 desktop

by Renato Golin

http://arstechnica.com/information-technology/2013/07/99-arm-based-pc-runs-… + Quad-core-A9 @ 1.2GHz + 4GB RAM + 512GB SDD + 2 x GBit Ethernet + <8W total power http://utilite-computer.com/web/utilite-specifications The complete system will be a lot more than $99, but still, I don't think it'll be more than $500. Maybe, this will be more stable than Panda boards for toolchain testing? cheers, --renato

12 years, 10 months

How to make gcc generate optimized code for statically linked TLS

by Vitali Sokhin

Hello, I use gcc-linaro-aarch64-linux-gnu-4.8 to compile my C code with thread-local variables. Here is an example of my C code: __thread u32 threadedVar; void test(void) { threadedVar = 0xDEAD; } gcc produces the following assembly to access my threaded variable: threadedVar = 0xDEAD; 72b0: d00000c0 adrp x0, 21000 72b4: f945ac00 ldr x0, [x0,#2904] 72b8: d503201f nop 72bc: d503201f nop 72c0: d53bd041 mrs x1, tpidr_el0 72c4: 529bd5a2 movz w2, #0xdead 72c8: b8206822 str w2, [x1,x0] This assembly fits dynamically linked code, but in my case I have statically linked application that does not load any additional modules. Since I have exactly one TLS block containing all thread-local variable gcc should be able to calculate the offset at link time. Can I make gcc to produce the following assembly ? threadedVar = 0xDEAD; 72c0: d53bd041 mrs x1, tpidr_el0 72c4: 529bd5a2 movz w2, #0xdead 72c8: b8206822 str w2, [x1,#offset_to_threadedVar] Thank you, Vitali

12 years, 10 months

How to make gcc generate optimized code for statically linked TLS

by Vitali Sokhin

12 years, 10 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain