linaro-toolchain January 2013

linaro-toolchain@lists.linaro.org

22 participants
45 discussions

by Anup Kini

Hi All, I am trying to build OpenNI drivers and stuck with the following linker error. /usr/bin/ld: error: ../../Bin/Arm-Release/libOpenNI.so uses VFP register arguments, ./Arm-Release/XnBaseNode.o does not /usr/bin/ld: failed to merge target specific data of file ./Arm-Release/XnBaseNode.o /usr/bin/ld: error: ../../Bin/Arm-Release/libOpenNI.so uses VFP register arguments, ./Arm-Release/XnDump.o does not /usr/bin/ld: failed to merge target specific data of file ./Arm-Release/XnDump.o and many more of similar errors with VFP. System : ZYNC ZC702 board with ARM Cortex A9 dual core. OS: Linaro 12.04 LTS GCC - 4.6.3 Is there some flag i have to set in the Makefile to correct the Hard/Soft float type ? How do i figure out the correct one ? -- *Anup Kini *Systems Engineer**** * ------------------------------ * *Synapticon** * | Cyber-Physical System Solutions **** Direct:**** +49 7335 / 186 999 17**** Fax:**** +49 7335 / 186 999 1 **** **** synapticon.com <http://www.synapticon.com/> | @synapticon_co<https://twitter.com/#!/synapticon_co> **** Synapticon GmbH | Hohlbachweg 2 | 73344 Gruibingen, DE Secretary +49 7335 / 186 999 0 | General Manager: Nikolai Ensslen Registry Court Ulm HRB 725114 | USt-ID DE271647127**** This message and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Please notify the sender immediately if you have received this e-mail by mistake and delete it from your system.

11 years, 10 months

Possible toolchain bug with handling return value of read()

by Riku Voipio

Hi, The testcase at https://launchpadlibrarian.net/128616769/compare-test.c With aarch64: aarch64-oe-linux-gcc -o a-test ./compare-test.c ./a-test: fail ret: -1: Bad address With X86_64: gcc -o test ./compare-test.c ./test correct. ret: -1: Bad address setting -D_FILE_OFFSET_BITS=64 doesn't make a difference. This is with: gcc version 4.7.3 20121205 (prerelease) (Linaro GCC 4.7-2012.12) This was found while debugging: https://bugs.launchpad.net/linaro-aarch64/+bug/1099896 Riku

11 years, 10 months

[MINUTES] Toolchain Working Group Weekly Meeting 14/Jan/2013

by Matthew Gretton-Dann

All, The minutes for today's calls are here: https://wiki.linaro.org/WorkingGroups/ToolChain/Meetings/2013-01-14 Action items are: TODO: Matt to investigate EEMBC Office gs8 failures ONGOING: Matt to talk to Dave Pigott about HF builders TODO: Matt blueprint backport of binutils 2.23.1 - backport just needs merging TODO: Matt to blueprint options for reducing QEMU based cross test noise TODO: Matt to unreserve Michael Hope's reservations TODO: Matt to look at why Cortex-A9 softfloat bootstraps fail in Stage2. TODO: Zhenqiang to do GCC Release: https://wiki.linaro.org/WorkingGroups/ToolChain/GCC/ReleaseProcess TODO: Matt to do Cortex Strings release. TODO: Matt chase up EEMBC Networking License TODO: Matt chase up with morvek who is leading KVM Virtual team. TODO: All to think of proposals for GNU Tools Caudron The agenda for next week's call is here: https://wiki.linaro.org/WorkingGroups/ToolChain/Meetings/2013-01-21 Please feel free to add your own agenda items before hand. Thanks, Matt -- Matthew Gretton-Dann Toolchain Working Group, Linaro

11 years, 10 months

[Activity] Week 02

by Zhenqiang Chen

Summary: * Rebase and test the shrink-wrap patches. * Learn how branch cost impact on code generation. Details: 1. Rebase and test the shrink-wrap patches. * For pretend arguments, it is hard to generate correct dwarf info for case: * Add dwarf info for ldrd_pop. Testing is ongoing. * Expose an interface from regcpprog and do copy propagation for the entry block. Benchmark logs show there are much more functions can be shrink-wrapped. 2. Read codes and enhance ifcvt.c. * For IF-THEN-ELSE, if the last insn of then_bb or else_bb is ANY_RETURN_P, we can save one JUMP. In this, we'd keep max MAX_CONDITIONAL_EXECUTE, not "max *= 2". A patch is sent out for review. * Take the branch probability into account. Test is ongoing. 3. R/M toolchain related work. Plan: * Follow up the shrink-wrap dwarf info issue. * Investigate benchmarks which is impacted by different branch cost. Planed leaves: * Feb. 9 - 15: Chinese Spring Festival. Best Regards! -Zhenqiang

11 years, 10 months

[ACTIVITY] 7-11 January 2013

by Yvan Roux

== Progress == * Short week again (leading compilation courses) * Merge request review - finished 4.6 and 4.7 requests. * Boehm GC AArch64 support - Back on this topic == Next == * Continue Boehm GC activity

11 years, 10 months

[ACTIVITY] 7-11 Jan 2013

by Renato Golin Linaro

== This Week == * Livermore Loops - Test was badly adapted, failures were due to undefined behaviour - Removed from test-suite until a propper adaptation can be done - LTO and Static Analysis issues raised - http://llvm.org/bugs/show_bug.cgi?id=14851 - http://llvm.org/bugs/show_bug.cgi?id=14852 * LLVM Builds - Builds fine on Chromebook, same check-all failures as other ARM targets - test-suite fails, haven't had time to properly investigate - Getting a pandaboard to act as a buildbot - Creating a LAVA job to run often and on-demand internally * AArch64 in LLVM - reviewing lots of patches from ARM (Tim Northover) - full back-end just sent, will review over the weekend * Loop Vectorize - Some discussions with Tao Wang about cost models - Got some ideas on what are the best changes for LLVM's cost model - Not much on this front * EuroLLVM 2013 - Trying to define the level of sponsorship Linaro can provide - CFP will go out next week, committee created, conference confirmed * Commits http://llvm.org/viewvc/llvm-project?view=rev&revision=171642 http://llvm.org/viewvc/llvm-project?view=rev&revision=171859 == Next Week == * Get the LAVA job running - need account at people.linaro.org, RT created * Get at least one buildbot in sync with LLVM's lab * Get some traction on the cost model * Cambridge LLVM Social, liaise with ARM == Future == * Try to draft an LLVM story for Linaro (and understand why I'm here in the first place) ;) * Have builds with vectorization turned on

11 years, 10 months

[ACTIVITY] 7-11 January 2013

by Brice Dobry

== Blueprints == gcc-investigate-lra-for-arm == Progress == * Built "lra" gcc branch of gcc for x86 * Collected and compared SPEC benchmark results with and without LRA enabled * Bootstrapped ARM toolchain with last reported working revision from lra branch * Tracked down and resolved ICE * Bootstrapped ARM toolchain with head revision from lra branch * Tracked down and resolved another ICE * Verified two patches (from above ICEs) have no regressions on trunk * Began investigation into target hooks for LRA for ARM to improve performance * Admin * Connect registration and trip preparations == Next week == * Collect benchmark results from SPEC for LRA on ARM * Complete target hooks and benchmark again * Review roster

11 years, 10 months

[ACTIVITY] 7-11 January 2013

by Christophe Lyon

== Progress == * 64-bits ops in Neon: pinged patch proposal. * disable peeling/vectorzer cost model: initial benchmarking done wth cost-model on (now default). Received some results with cost model off, waiting for spec2k. * started looking at smin-umin idiom patch from Ramana. Rebased and launched build to make some benchmarking. * restarted working on local board setup for benchmarking * discussed bug reports on ARM-Neon instrinsics testsuite == Next == * handle 64-bits bitops in Neon feedback from upstream if any * analyze results of benchmarking with vectorizer cost model * analyze results of benchmarking with smin-umin idiom patch * continue board setup/update

11 years, 10 months

[ACTIVITY] 7-11 January 2013

by Matthew Gretton-Dann

== Blueprints == Initial Current Actual fix-gcc-multiarch-testing 31 Dec 2012 31 Jan 2013 == Progress == * Infrastructure * Investigations of why Cortex-A9 HF boards are failing * Admin * Booked tickets to Connect * 'Onboarding' prep for new starters and assignees * Cortex Strings * Applied patches == Next week == * Prepare Cortex Strings release * Ensure GCC backports are up to date. * Release week. * Catch up on outstanding cards. == Future == * Run HOT/COLD partitioning benchmarks * Analyse ARM results * On x86_64 to see what the actual benefit we could get * fix-gcc-multiarch-testing * Come up with strawman proposal for updating testsuite to handle testing with varying command-line options. -- Matthew Gretton-Dann Toolchain Working Group, Linaro

11 years, 10 months

Help on epilogue dwarf info

by Zhenqiang Chen

Hi, Would you please help on how to generate correct epilogue dwarf info? Without correct dwarf info, when shrink-wrap is enabled, it tends to ICE at dwarf2cfi.c: function maybe_record_trace_start. /* We ought to have the same state incoming to a given trace no matter how we arrive at the trace. Anything else means we've got some kind of optimization error. */ gcc_checking_assert (cfi_row_equal_p (cur_row, ti->beg_row)); Issues: 1) pretend_args The attached pretend_arg.c shows an example about pretend_args dwarf info push {r2, r3} .cfi_def_cfa_offset 8 .cfi_offset 2, -8 .cfi_offset 3, -4 use r3 push {r4, r5, lr} ... pop {r4, r5, lr} add sp, sp, #8 //No instruction here to restore r2 and r3 Can we RESTORE r2 and r3? * If we notes to RESTORE r2 and r3, it might lead to wrong info for GDB since no instruction restores them. * If we do not RESTORE them, the reg_save dwarf info will not be cleared. Then the dwarf check will fail when the function is shrink-wrapped. 2) frame_pointer_needed In prologue, we set fp like fp = sp + INT After this instruction, cfi_def_cfa_register is set to fp In epilogue. we have fp += INT sp = fp Can we reset cfi_def_cfa_register back to sp? * If we set it back to sp, how to handle it in arm_unwind_emit_set, which assumes sp can not be set from other register? /* A stack increment. */ if (GET_CODE (e1) != PLUS || !REG_P (XEXP (e1, 0)) || REGNO (XEXP (e1, 0)) != SP_REGNUM || !CONST_INT_P (XEXP (e1, 1))) abort (); * If we do not set it back, to get correct dwarf info for POP after "sp = fp", we have to add notes " sp = fp + INT" for dwarf-info while we have "sp = sp + INT" in the insn. Here is the workaround POP RTL example for the attached alloca,c: (insn/f 62 61 66 3 (parallel [ (set/f (reg/f:SI 13 sp) // sp = sp + 8 (plus:SI (reg/f:SI 13 sp) (const_int 8 [0x8]))) (set/f (reg:SI 3 r3) (mem/c:SI (reg/f:SI 13 sp) [3 S4 A32])) (set/f (reg/f:SI 7 r7) (mem/c:SI (plus:SI (reg/f:SI 13 sp) (const_int 4 [0x4])) [3 S4 A32])) ]) alloca.c:8 329 {*load_multiple_with_writeback} (expr_list:REG_UNUSED (reg:SI 3 r3) (expr_list:REG_CFA_ADJUST_CFA (set (reg/f:SI 13 sp) (plus:SI (reg/f:SI 7 r7) // sp = fp + 8 (const_int 8 [0x8]))) (expr_list:REG_CFA_RESTORE (reg/f:SI 7 r7) (expr_list:REG_CFA_RESTORE (reg:SI 3 r3) (nil)))))) (3) No idea for if (crtl->calls_eh_return) emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, gen_rtx_REG (SImode, ARM_EH_STACKADJ_REGNUM))); Currently I have no shrink-wrapped test case which crtl->calls_eh_return is true. Thanks! -Zhenqiang

11 years, 10 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain January 2013