From: Leon Romanovsky leonro@nvidia.com

Update the pci_p2pdma_bus_addr_map() function to take a direct pointer to the p2pdma_provider structure instead of the pci_p2pdma_map_state. This simplifies the API by removing the need for callers to extract the provider from the state structure.

The change updates all callers across the kernel (block layer, IOMMU, DMA direct, and HMM) to pass the provider pointer directly, making the code more explicit and reducing unnecessary indirection. This also removes the runtime warning check since callers now have direct control over which provider they use.

Tested-by: Alex Mastro amastro@fb.com Tested-by: Nicolin Chen nicolinc@nvidia.com Signed-off-by: Leon Romanovsky leonro@nvidia.com --- block/blk-mq-dma.c | 2 +- drivers/iommu/dma-iommu.c | 4 ++-- include/linux/pci-p2pdma.h | 7 +++---- kernel/dma/direct.c | 4 ++-- mm/hmm.c | 2 +- 5 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/block/blk-mq-dma.c b/block/blk-mq-dma.c index 449950029872..a1b623744b2f 100644 --- a/block/blk-mq-dma.c +++ b/block/blk-mq-dma.c @@ -85,7 +85,7 @@ static inline bool blk_can_dma_map_iova(struct request *req,

static bool blk_dma_map_bus(struct blk_dma_iter *iter, struct phys_vec *vec) { - iter->addr = pci_p2pdma_bus_addr_map(&iter->p2pdma, vec->paddr); + iter->addr = pci_p2pdma_bus_addr_map(iter->p2pdma.mem, vec->paddr); iter->len = vec->len; return true; } diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index 7944a3af4545..e52d19d2e833 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -1439,8 +1439,8 @@ int iommu_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, * as a bus address, __finalise_sg() will copy the dma * address into the output segment. */ - s->dma_address = pci_p2pdma_bus_addr_map(&p2pdma_state, - sg_phys(s)); + s->dma_address = pci_p2pdma_bus_addr_map( + p2pdma_state.mem, sg_phys(s)); sg_dma_len(s) = sg->length; sg_dma_mark_bus_address(s); continue; diff --git a/include/linux/pci-p2pdma.h b/include/linux/pci-p2pdma.h index 1400f3ad4299..9516ef97b17a 100644 --- a/include/linux/pci-p2pdma.h +++ b/include/linux/pci-p2pdma.h @@ -181,16 +181,15 @@ pci_p2pdma_state(struct pci_p2pdma_map_state *state, struct device *dev, /** * pci_p2pdma_bus_addr_map - Translate a physical address to a bus address * for a PCI_P2PDMA_MAP_BUS_ADDR transfer. - * @state: P2P state structure + * @provider: P2P provider structure * @paddr: physical address to map * * Map a physically contiguous PCI_P2PDMA_MAP_BUS_ADDR transfer. */ static inline dma_addr_t -pci_p2pdma_bus_addr_map(struct pci_p2pdma_map_state *state, phys_addr_t paddr) +pci_p2pdma_bus_addr_map(struct p2pdma_provider *provider, phys_addr_t paddr) { - WARN_ON_ONCE(state->map != PCI_P2PDMA_MAP_BUS_ADDR); - return paddr + state->mem->bus_offset; + return paddr + provider->bus_offset; }

#endif /* _LINUX_PCI_P2P_H */ diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 1f9ee9759426..d8b3dfc598b2 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -479,8 +479,8 @@ int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, int nents, } break; case PCI_P2PDMA_MAP_BUS_ADDR: - sg->dma_address = pci_p2pdma_bus_addr_map(&p2pdma_state, - sg_phys(sg)); + sg->dma_address = pci_p2pdma_bus_addr_map( + p2pdma_state.mem, sg_phys(sg)); sg_dma_mark_bus_address(sg); continue; default: diff --git a/mm/hmm.c b/mm/hmm.c index 87562914670a..9bf0b831a029 100644 --- a/mm/hmm.c +++ b/mm/hmm.c @@ -811,7 +811,7 @@ dma_addr_t hmm_dma_map_pfn(struct device *dev, struct hmm_dma_map *map, break; case PCI_P2PDMA_MAP_BUS_ADDR: pfns[idx] |= HMM_PFN_P2PDMA_BUS | HMM_PFN_DMA_MAPPED; - return pci_p2pdma_bus_addr_map(p2pdma_state, paddr); + return pci_p2pdma_bus_addr_map(p2pdma_state->mem, paddr); default: return DMA_MAPPING_ERROR; }

From: Leon Romanovsky leonro@nvidia.com

Provide an access to pci_p2pdma_map_type() function to allow subsystems to determine the appropriate mapping type for P2PDMA transfers between a provider and target device.

The pci_p2pdma_map_type() function is the core P2P layer version of the existing public, but struct page focused, pci_p2pdma_state() function. It returns the same result. It is required to use the p2p subsystem from drivers that don't use the struct page layer.

Like __pci_p2pdma_update_state() it is not an exported function. The idea is that only subsystem code will implement mapping helpers for taking in phys_addr_t lists, this is deliberately not made accessible to every driver to prevent abuse.

Following patches will use this function to implement a shared DMA mapping helper for DMABUF.

Tested-by: Alex Mastro amastro@fb.com Tested-by: Nicolin Chen nicolinc@nvidia.com Signed-off-by: Leon Romanovsky leonro@nvidia.com --- drivers/pci/p2pdma.c | 14 ++++++-- include/linux/pci-p2pdma.h | 85 +++++++++++++++++++++++++--------------------- 2 files changed, 58 insertions(+), 41 deletions(-)

diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c index 664ea3272d73..11526e3c83fc 100644 --- a/drivers/pci/p2pdma.c +++ b/drivers/pci/p2pdma.c @@ -1056,8 +1056,18 @@ void pci_p2pmem_publish(struct pci_dev *pdev, bool publish) } EXPORT_SYMBOL_GPL(pci_p2pmem_publish);

-static enum pci_p2pdma_map_type -pci_p2pdma_map_type(struct p2pdma_provider *provider, struct device *dev) +/** + * pci_p2pdma_map_type - Determine the mapping type for P2PDMA transfers + * @provider: P2PDMA provider structure + * @dev: Target device for the transfer + * + * Determines how peer-to-peer DMA transfers should be mapped between + * the provider and the target device. The mapping type indicates whether + * the transfer can be done directly through PCI switches or must go + * through the host bridge. + */ +enum pci_p2pdma_map_type pci_p2pdma_map_type(struct p2pdma_provider *provider, + struct device *dev) { enum pci_p2pdma_map_type type = PCI_P2PDMA_MAP_NOT_SUPPORTED; struct pci_dev *pdev = to_pci_dev(provider->owner); diff --git a/include/linux/pci-p2pdma.h b/include/linux/pci-p2pdma.h index e307c9380d46..1e499a8e0099 100644 --- a/include/linux/pci-p2pdma.h +++ b/include/linux/pci-p2pdma.h @@ -26,6 +26,45 @@ struct p2pdma_provider { u64 bus_offset; };

+enum pci_p2pdma_map_type { + /* + * PCI_P2PDMA_MAP_UNKNOWN: Used internally as an initial state before + * the mapping type has been calculated. Exported routines for the API + * will never return this value. + */ + PCI_P2PDMA_MAP_UNKNOWN = 0, + + /* + * Not a PCI P2PDMA transfer. + */ + PCI_P2PDMA_MAP_NONE, + + /* + * PCI_P2PDMA_MAP_NOT_SUPPORTED: Indicates the transaction will + * traverse the host bridge and the host bridge is not in the + * allowlist. DMA Mapping routines should return an error when + * this is returned. + */ + PCI_P2PDMA_MAP_NOT_SUPPORTED, + + /* + * PCI_P2PDMA_MAP_BUS_ADDR: Indicates that two devices can talk to + * each other directly through a PCI switch and the transaction will + * not traverse the host bridge. Such a mapping should program + * the DMA engine with PCI bus addresses. + */ + PCI_P2PDMA_MAP_BUS_ADDR, + + /* + * PCI_P2PDMA_MAP_THRU_HOST_BRIDGE: Indicates two devices can talk + * to each other, but the transaction traverses a host bridge on the + * allowlist. In this case, a normal mapping either with CPU physical + * addresses (in the case of dma-direct) or IOVA addresses (in the + * case of IOMMUs) should be used to program the DMA engine. + */ + PCI_P2PDMA_MAP_THRU_HOST_BRIDGE, +}; + #ifdef CONFIG_PCI_P2PDMA int pcim_p2pdma_init(struct pci_dev *pdev); struct p2pdma_provider *pcim_p2pdma_provider(struct pci_dev *pdev, int bar); @@ -45,6 +84,8 @@ int pci_p2pdma_enable_store(const char *page, struct pci_dev **p2p_dev, bool *use_p2pdma); ssize_t pci_p2pdma_enable_show(char *page, struct pci_dev *p2p_dev, bool use_p2pdma); +enum pci_p2pdma_map_type pci_p2pdma_map_type(struct p2pdma_provider *provider, + struct device *dev); #else /* CONFIG_PCI_P2PDMA */ static inline int pcim_p2pdma_init(struct pci_dev *pdev) { @@ -106,6 +147,11 @@ static inline ssize_t pci_p2pdma_enable_show(char *page, { return sprintf(page, "none\n"); } +static inline enum pci_p2pdma_map_type +pci_p2pdma_map_type(struct p2pdma_provider *provider, struct device *dev) +{ + return PCI_P2PDMA_MAP_NOT_SUPPORTED; +} #endif /* CONFIG_PCI_P2PDMA */

@@ -120,45 +166,6 @@ static inline struct pci_dev *pci_p2pmem_find(struct device *client) return pci_p2pmem_find_many(&client, 1); }

-enum pci_p2pdma_map_type { - /* - * PCI_P2PDMA_MAP_UNKNOWN: Used internally as an initial state before - * the mapping type has been calculated. Exported routines for the API - * will never return this value. - */ - PCI_P2PDMA_MAP_UNKNOWN = 0, - - /* - * Not a PCI P2PDMA transfer. - */ - PCI_P2PDMA_MAP_NONE, - - /* - * PCI_P2PDMA_MAP_NOT_SUPPORTED: Indicates the transaction will - * traverse the host bridge and the host bridge is not in the - * allowlist. DMA Mapping routines should return an error when - * this is returned. - */ - PCI_P2PDMA_MAP_NOT_SUPPORTED, - - /* - * PCI_P2PDMA_MAP_BUS_ADDR: Indicates that two devices can talk to - * each other directly through a PCI switch and the transaction will - * not traverse the host bridge. Such a mapping should program - * the DMA engine with PCI bus addresses. - */ - PCI_P2PDMA_MAP_BUS_ADDR, - - /* - * PCI_P2PDMA_MAP_THRU_HOST_BRIDGE: Indicates two devices can talk - * to each other, but the transaction traverses a host bridge on the - * allowlist. In this case, a normal mapping either with CPU physical - * addresses (in the case of dma-direct) or IOVA addresses (in the - * case of IOMMUs) should be used to program the DMA engine. - */ - PCI_P2PDMA_MAP_THRU_HOST_BRIDGE, -}; - struct pci_p2pdma_map_state { struct p2pdma_provider *mem; enum pci_p2pdma_map_type map;

From: Leon Romanovsky leonro@nvidia.com

Add dma_buf_map() and dma_buf_unmap() helpers to convert an array of MMIO physical address ranges into scatter-gather tables with proper DMA mapping.

These common functions are a starting point and support any PCI drivers creating mappings from their BAR's MMIO addresses. VFIO is one case, as shortly will be RDMA. We can review existing DRM drivers to refactor them separately. We hope this will evolve into routines to help common DRM that include mixed CPU and MMIO mappings.

Compared to the dma_map_resource() abuse this implementation handles the complicated PCI P2P scenarios properly, especially when an IOMMU is enabled:

- Direct bus address mapping without IOVA allocation for PCI_P2PDMA_MAP_BUS_ADDR, using pci_p2pdma_bus_addr_map(). This happens if the IOMMU is enabled but the PCIe switch ACS flags allow transactions to avoid the host bridge.

Further, this handles the slightly obscure, case of MMIO with a phys_addr_t that is different from the physical BAR programming (bus offset). The phys_addr_t is converted to a dma_addr_t and accommodates this effect. This enables certain real systems to work, especially on ARM platforms.

- Mapping through host bridge with IOVA allocation and DMA_ATTR_MMIO attribute for MMIO memory regions (PCI_P2PDMA_MAP_THRU_HOST_BRIDGE). This happens when the IOMMU is enabled and the ACS flags are forcing all traffic to the IOMMU - ie for virtualization systems.

- Cases where P2P is not supported through the host bridge/CPU. The P2P subsystem is the proper place to detect this and block it.

Helper functions fill_sg_entry() and calc_sg_nents() handle the scatter-gather table construction, splitting large regions into UINT_MAX-sized chunks to fit within sg->length field limits.

Since the physical address based DMA API forbids use of the CPU list of the scatterlist this will produce a mangled scatterlist that has a fully zero-length and NULL'd CPU list. The list is 0 length, all the struct page pointers are NULL and zero sized. This is stronger and more robust than the existing mangle_sg_table() technique. It is a future project to migrate DMABUF as a subsystem away from using scatterlist for this data structure.

Tested-by: Alex Mastro amastro@fb.com Tested-by: Nicolin Chen nicolinc@nvidia.com Signed-off-by: Leon Romanovsky leonro@nvidia.com --- drivers/dma-buf/dma-buf.c | 235 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/dma-buf.h | 18 ++++ 2 files changed, 253 insertions(+)

diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c index 2bcf9ceca997..cb55dff1dad5 100644 --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c @@ -1254,6 +1254,241 @@ void dma_buf_unmap_attachment_unlocked(struct dma_buf_attachment *attach, } EXPORT_SYMBOL_NS_GPL(dma_buf_unmap_attachment_unlocked, "DMA_BUF");

+static struct scatterlist *fill_sg_entry(struct scatterlist *sgl, size_t length, + dma_addr_t addr) +{ + unsigned int len, nents; + int i; + + nents = DIV_ROUND_UP(length, UINT_MAX); + for (i = 0; i < nents; i++) { + len = min_t(size_t, length, UINT_MAX); + length -= len; + /* + * DMABUF abuses scatterlist to create a scatterlist + * that does not have any CPU list, only the DMA list. + * Always set the page related values to NULL to ensure + * importers can't use it. The phys_addr based DMA API + * does not require the CPU list for mapping or unmapping. + */ + sg_set_page(sgl, NULL, 0, 0); + sg_dma_address(sgl) = addr + i * UINT_MAX; + sg_dma_len(sgl) = len; + sgl = sg_next(sgl); + } + + return sgl; +} + +static unsigned int calc_sg_nents(struct dma_iova_state *state, + struct dma_buf_phys_vec *phys_vec, + size_t nr_ranges, size_t size) +{ + unsigned int nents = 0; + size_t i; + + if (!state || !dma_use_iova(state)) { + for (i = 0; i < nr_ranges; i++) + nents += DIV_ROUND_UP(phys_vec[i].len, UINT_MAX); + } else { + /* + * In IOVA case, there is only one SG entry which spans + * for whole IOVA address space, but we need to make sure + * that it fits sg->length, maybe we need more. + */ + nents = DIV_ROUND_UP(size, UINT_MAX); + } + + return nents; +} + +/** + * struct dma_buf_dma - holds DMA mapping information + * @sgt: Scatter-gather table + * @state: DMA IOVA state relevant in IOMMU-based DMA + * @size: Total size of DMA transfer + */ +struct dma_buf_dma { + struct sg_table sgt; + struct dma_iova_state *state; + size_t size; +}; + +/** + * dma_buf_map - Returns the scatterlist table of the attachment from arrays + * of physical vectors. This funciton is intended for MMIO memory only. + * @attach: [in] attachment whose scatterlist is to be returned + * @provider: [in] p2pdma provider + * @phys_vec: [in] array of physical vectors + * @nr_ranges: [in] number of entries in phys_vec array + * @size: [in] total size of phys_vec + * @dir: [in] direction of DMA transfer + * + * Returns sg_table containing the scatterlist to be returned; returns ERR_PTR + * on error. May return -EINTR if it is interrupted by a signal. + * + * On success, the DMA addresses and lengths in the returned scatterlist are + * PAGE_SIZE aligned. + * + * A mapping must be unmapped by using dma_buf_unmap(). + */ +struct sg_table *dma_buf_map(struct dma_buf_attachment *attach, + struct p2pdma_provider *provider, + struct dma_buf_phys_vec *phys_vec, + size_t nr_ranges, size_t size, + enum dma_data_direction dir) +{ + unsigned int nents, mapped_len = 0; + struct dma_buf_dma *dma; + struct scatterlist *sgl; + dma_addr_t addr; + size_t i; + int ret; + + dma_resv_assert_held(attach->dmabuf->resv); + + if (WARN_ON(!attach || !attach->dmabuf || !provider)) + /* This function is supposed to work on MMIO memory only */ + return ERR_PTR(-EINVAL); + + dma = kzalloc(sizeof(*dma), GFP_KERNEL); + if (!dma) + return ERR_PTR(-ENOMEM); + + switch (pci_p2pdma_map_type(provider, attach->dev)) { + case PCI_P2PDMA_MAP_BUS_ADDR: + /* + * There is no need in IOVA at all for this flow. + */ + break; + case PCI_P2PDMA_MAP_THRU_HOST_BRIDGE: + dma->state = kzalloc(sizeof(*dma->state), GFP_KERNEL); + if (!dma->state) { + ret = -ENOMEM; + goto err_free_dma; + } + + dma_iova_try_alloc(attach->dev, dma->state, 0, size); + break; + default: + ret = -EINVAL; + goto err_free_dma; + } + + nents = calc_sg_nents(dma->state, phys_vec, nr_ranges, size); + ret = sg_alloc_table(&dma->sgt, nents, GFP_KERNEL | __GFP_ZERO); + if (ret) + goto err_free_state; + + sgl = dma->sgt.sgl; + + for (i = 0; i < nr_ranges; i++) { + if (!dma->state) { + addr = pci_p2pdma_bus_addr_map(provider, + phys_vec[i].paddr); + } else if (dma_use_iova(dma->state)) { + ret = dma_iova_link(attach->dev, dma->state, + phys_vec[i].paddr, 0, + phys_vec[i].len, dir, + DMA_ATTR_MMIO); + if (ret) + goto err_unmap_dma; + + mapped_len += phys_vec[i].len; + } else { + addr = dma_map_phys(attach->dev, phys_vec[i].paddr, + phys_vec[i].len, dir, + DMA_ATTR_MMIO); + ret = dma_mapping_error(attach->dev, addr); + if (ret) + goto err_unmap_dma; + } + + if (!dma->state || !dma_use_iova(dma->state)) + sgl = fill_sg_entry(sgl, phys_vec[i].len, addr); + } + + if (dma->state && dma_use_iova(dma->state)) { + WARN_ON_ONCE(mapped_len != size); + ret = dma_iova_sync(attach->dev, dma->state, 0, mapped_len); + if (ret) + goto err_unmap_dma; + + sgl = fill_sg_entry(sgl, mapped_len, dma->state->addr); + } + + dma->size = size; + + /* + * No CPU list included — set orig_nents = 0 so others can detect + * this via SG table (use nents only). + */ + dma->sgt.orig_nents = 0; + + + /* + * SGL must be NULL to indicate that SGL is the last one + * and we allocated correct number of entries in sg_alloc_table() + */ + WARN_ON_ONCE(sgl); + return &dma->sgt; + +err_unmap_dma: + if (!i || !dma->state) { + ; /* Do nothing */ + } else if (dma_use_iova(dma->state)) { + dma_iova_destroy(attach->dev, dma->state, mapped_len, dir, + DMA_ATTR_MMIO); + } else { + for_each_sgtable_dma_sg(&dma->sgt, sgl, i) + dma_unmap_phys(attach->dev, sg_dma_address(sgl), + sg_dma_len(sgl), dir, DMA_ATTR_MMIO); + } + sg_free_table(&dma->sgt); +err_free_state: + kfree(dma->state); +err_free_dma: + kfree(dma); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_NS_GPL(dma_buf_map, "DMA_BUF"); + +/** + * dma_buf_unmap - unmaps the buffer + * @attach: [in] attachment to unmap buffer from + * @sgt: [in] scatterlist info of the buffer to unmap + * @direction: [in] direction of DMA transfer + * + * This unmaps a DMA mapping for @attached obtained by dma_buf_map(). + */ +void dma_buf_unmap(struct dma_buf_attachment *attach, struct sg_table *sgt, + enum dma_data_direction dir) +{ + struct dma_buf_dma *dma = container_of(sgt, struct dma_buf_dma, sgt); + int i; + + dma_resv_assert_held(attach->dmabuf->resv); + + if (!dma->state) { + ; /* Do nothing */ + } else if (dma_use_iova(dma->state)) { + dma_iova_destroy(attach->dev, dma->state, dma->size, dir, + DMA_ATTR_MMIO); + } else { + struct scatterlist *sgl; + + for_each_sgtable_dma_sg(sgt, sgl, i) + dma_unmap_phys(attach->dev, sg_dma_address(sgl), + sg_dma_len(sgl), dir, DMA_ATTR_MMIO); + } + + sg_free_table(sgt); + kfree(dma->state); + kfree(dma); + +} +EXPORT_SYMBOL_NS_GPL(dma_buf_unmap, "DMA_BUF"); + /** * dma_buf_move_notify - notify attachments that DMA-buf is moving * diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index d58e329ac0e7..545ba27a5040 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -22,6 +22,7 @@ #include <linux/fs.h> #include <linux/dma-fence.h> #include <linux/wait.h> +#include <linux/pci-p2pdma.h>

struct device; struct dma_buf; @@ -530,6 +531,16 @@ struct dma_buf_export_info { void *priv; };

+/** + * struct dma_buf_phys_vec - describe continuous chunk of memory + * @paddr: physical address of that chunk + * @len: Length of this chunk + */ +struct dma_buf_phys_vec { + phys_addr_t paddr; + size_t len; +}; + /** * DEFINE_DMA_BUF_EXPORT_INFO - helper macro for exporters * @name: export-info name @@ -609,4 +620,11 @@ int dma_buf_vmap_unlocked(struct dma_buf *dmabuf, struct iosys_map *map); void dma_buf_vunmap_unlocked(struct dma_buf *dmabuf, struct iosys_map *map); struct dma_buf *dma_buf_iter_begin(void); struct dma_buf *dma_buf_iter_next(struct dma_buf *dmbuf); +struct sg_table *dma_buf_map(struct dma_buf_attachment *attach, + struct p2pdma_provider *provider, + struct dma_buf_phys_vec *phys_vec, + size_t nr_ranges, size_t size, + enum dma_data_direction dir); +void dma_buf_unmap(struct dma_buf_attachment *attach, struct sg_table *sgt, + enum dma_data_direction dir); #endif /* __DMA_BUF_H__ */

From: Vivek Kasireddy vivek.kasireddy@intel.com

There is no need to share the main device pointer (struct vfio_device *) with all the feature functions as they only need the core device pointer. Therefore, extract the core device pointer once in the caller (vfio_pci_core_ioctl_feature) and share it instead.

Signed-off-by: Vivek Kasireddy vivek.kasireddy@intel.com Tested-by: Alex Mastro amastro@fb.com Tested-by: Nicolin Chen nicolinc@nvidia.com Signed-off-by: Leon Romanovsky leonro@nvidia.com --- drivers/vfio/pci/vfio_pci_core.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c index 7dcf5439dedc..ca9a95716a85 100644 --- a/drivers/vfio/pci/vfio_pci_core.c +++ b/drivers/vfio/pci/vfio_pci_core.c @@ -299,11 +299,9 @@ static int vfio_pci_runtime_pm_entry(struct vfio_pci_core_device *vdev, return 0; }

-static int vfio_pci_core_pm_entry(struct vfio_device *device, u32 flags, +static int vfio_pci_core_pm_entry(struct vfio_pci_core_device *vdev, u32 flags, void __user *arg, size_t argsz) { - struct vfio_pci_core_device *vdev = - container_of(device, struct vfio_pci_core_device, vdev); int ret;

ret = vfio_check_feature(flags, argsz, VFIO_DEVICE_FEATURE_SET, 0); @@ -320,12 +318,10 @@ static int vfio_pci_core_pm_entry(struct vfio_device *device, u32 flags, }

static int vfio_pci_core_pm_entry_with_wakeup( - struct vfio_device *device, u32 flags, + struct vfio_pci_core_device *vdev, u32 flags, struct vfio_device_low_power_entry_with_wakeup __user *arg, size_t argsz) { - struct vfio_pci_core_device *vdev = - container_of(device, struct vfio_pci_core_device, vdev); struct vfio_device_low_power_entry_with_wakeup entry; struct eventfd_ctx *efdctx; int ret; @@ -376,11 +372,9 @@ static void vfio_pci_runtime_pm_exit(struct vfio_pci_core_device *vdev) up_write(&vdev->memory_lock); }

-static int vfio_pci_core_pm_exit(struct vfio_device *device, u32 flags, +static int vfio_pci_core_pm_exit(struct vfio_pci_core_device *vdev, u32 flags, void __user *arg, size_t argsz) { - struct vfio_pci_core_device *vdev = - container_of(device, struct vfio_pci_core_device, vdev); int ret;

ret = vfio_check_feature(flags, argsz, VFIO_DEVICE_FEATURE_SET, 0); @@ -1473,11 +1467,10 @@ long vfio_pci_core_ioctl(struct vfio_device *core_vdev, unsigned int cmd, } EXPORT_SYMBOL_GPL(vfio_pci_core_ioctl);

-static int vfio_pci_core_feature_token(struct vfio_device *device, u32 flags, - uuid_t __user *arg, size_t argsz) +static int vfio_pci_core_feature_token(struct vfio_pci_core_device *vdev, + u32 flags, uuid_t __user *arg, + size_t argsz) { - struct vfio_pci_core_device *vdev = - container_of(device, struct vfio_pci_core_device, vdev); uuid_t uuid; int ret;

@@ -1504,16 +1497,19 @@ static int vfio_pci_core_feature_token(struct vfio_device *device, u32 flags, int vfio_pci_core_ioctl_feature(struct vfio_device *device, u32 flags, void __user *arg, size_t argsz) { + struct vfio_pci_core_device *vdev = + container_of(device, struct vfio_pci_core_device, vdev); + switch (flags & VFIO_DEVICE_FEATURE_MASK) { case VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY: - return vfio_pci_core_pm_entry(device, flags, arg, argsz); + return vfio_pci_core_pm_entry(vdev, flags, arg, argsz); case VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP: - return vfio_pci_core_pm_entry_with_wakeup(device, flags, + return vfio_pci_core_pm_entry_with_wakeup(vdev, flags, arg, argsz); case VFIO_DEVICE_FEATURE_LOW_POWER_EXIT: - return vfio_pci_core_pm_exit(device, flags, arg, argsz); + return vfio_pci_core_pm_exit(vdev, flags, arg, argsz); case VFIO_DEVICE_FEATURE_PCI_VF_TOKEN: - return vfio_pci_core_feature_token(device, flags, arg, argsz); + return vfio_pci_core_feature_token(vdev, flags, arg, argsz); default: return -ENOTTY; }

From: Leon Romanovsky leonro@nvidia.com

Add support for exporting PCI device MMIO regions through dma-buf, enabling safe sharing of non-struct page memory with controlled lifetime management. This allows RDMA and other subsystems to import dma-buf FDs and build them into memory regions for PCI P2P operations.

The implementation provides a revocable attachment mechanism using dma-buf move operations. MMIO regions are normally pinned as BARs don't change physical addresses, but access is revoked when the VFIO device is closed or a PCI reset is issued. This ensures kernel self-defense against potentially hostile userspace.

Currently VFIO can take MMIO regions from the device's BAR and map them into a PFNMAP VMA with special PTEs. This mapping type ensures the memory cannot be used with things like pin_user_pages(), hmm, and so on. In practice only the user process CPU and KVM can safely make use of these VMA. When VFIO shuts down these VMAs are cleaned by unmap_mapping_range() to prevent any UAF of the MMIO beyond driver unbind.

However, VFIO type 1 has an insecure behavior where it uses follow_pfnmap_*() to fish a MMIO PFN out of a VMA and program it back into the IOMMU. This has a long history of enabling P2P DMA inside VMs, but has serious lifetime problems by allowing a UAF of the MMIO after the VFIO driver has been unbound.

Introduce DMABUF as a new safe way to export a FD based handle for the MMIO regions. This can be consumed by existing DMABUF importers like RDMA or DRM without opening an UAF. A following series will add an importer to iommufd to obsolete the type 1 code and allow safe UAF-free MMIO P2P in VM cases.

DMABUF has a built in synchronous invalidation mechanism called move_notify. VFIO keeps track of all drivers importing its MMIO and can invoke a synchronous invalidation callback to tell the importing drivers to DMA unmap and forget about the MMIO pfns. This process is being called revoke. This synchronous invalidation fully prevents any lifecycle problems. VFIO will do this before unbinding its driver ensuring there is no UAF of the MMIO beyond the driver lifecycle.

Further, VFIO has additional behavior to block access to the MMIO during things like Function Level Reset. This is because some poor platforms may experience a MCE type crash when touching MMIO of a PCI device that is undergoing a reset. Today this is done by using unmap_mapping_range() on the VMAs. Extend that into the DMABUF world and temporarily revoke the MMIO from the DMABUF importers during FLR as well. This will more robustly prevent an errant P2P from possibly upsetting the platform.

A DMABUF FD is a preferred handle for MMIO compared to using something like a pgmap because: - VFIO is supported, including its P2P feature, on archs that don't support pgmap - PCI devices have all sorts of BAR sizes, including ones smaller than a section so a pgmap cannot always be created - It is undesirable to waste a lot of memory for struct pages, especially for a case like a GPU with ~100GB of BAR size - We want a synchronous revoke semantic to support FLR with light hardware requirements

Use the P2P subsystem to help generate the DMA mapping. This is a significant upgrade over the abuse of dma_map_resource() that has historically been used by DMABUF exporters. Experience with an OOT version of this patch shows that real systems do need this. This approach deals with all the P2P scenarios: - Non-zero PCI bus_offset - ACS flags routing traffic to the IOMMU - ACS flags that bypass the IOMMU - though vfio noiommu is required to hit this.

There will be further work to formalize the revoke semantic in DMABUF. For now this acts like a move_notify dynamic exporter where importer fault handling will get a failure when they attempt to map. This means that only fully restartable fault capable importers can import the VFIO DMABUFs. A future revoke semantic should open this up to more HW as the HW only needs to invalidate, not handle restartable faults.

Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Vivek Kasireddy vivek.kasireddy@intel.com Signed-off-by: Leon Romanovsky leonro@nvidia.com --- drivers/vfio/pci/Kconfig | 3 + drivers/vfio/pci/Makefile | 1 + drivers/vfio/pci/vfio_pci.c | 5 + drivers/vfio/pci/vfio_pci_config.c | 22 ++- drivers/vfio/pci/vfio_pci_core.c | 18 ++- drivers/vfio/pci/vfio_pci_dmabuf.c | 315 +++++++++++++++++++++++++++++++++++++ drivers/vfio/pci/vfio_pci_priv.h | 23 +++ include/linux/vfio_pci_core.h | 42 +++++ include/uapi/linux/vfio.h | 28 ++++ 9 files changed, 452 insertions(+), 5 deletions(-)

diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig index 2b0172f54665..2b9fca00e9e8 100644 --- a/drivers/vfio/pci/Kconfig +++ b/drivers/vfio/pci/Kconfig @@ -55,6 +55,9 @@ config VFIO_PCI_ZDEV_KVM

To enable s390x KVM vfio-pci extensions, say Y.

+config VFIO_PCI_DMABUF + def_bool y if VFIO_PCI_CORE && PCI_P2PDMA && DMA_SHARED_BUFFER + source "drivers/vfio/pci/mlx5/Kconfig"

source "drivers/vfio/pci/hisilicon/Kconfig" diff --git a/drivers/vfio/pci/Makefile b/drivers/vfio/pci/Makefile index cf00c0a7e55c..53f59226ae01 100644 --- a/drivers/vfio/pci/Makefile +++ b/drivers/vfio/pci/Makefile @@ -2,6 +2,7 @@

vfio-pci-core-y := vfio_pci_core.o vfio_pci_intrs.o vfio_pci_rdwr.o vfio_pci_config.o vfio-pci-core-$(CONFIG_VFIO_PCI_ZDEV_KVM) += vfio_pci_zdev.o +vfio-pci-core-$(CONFIG_VFIO_PCI_DMABUF) += vfio_pci_dmabuf.o obj-$(CONFIG_VFIO_PCI_CORE) += vfio-pci-core.o

vfio-pci-y := vfio_pci.o diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index ac10f14417f2..6d41cf26b539 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -147,6 +147,10 @@ static const struct vfio_device_ops vfio_pci_ops = { .pasid_detach_ioas = vfio_iommufd_physical_pasid_detach_ioas, };

+static const struct vfio_pci_device_ops vfio_pci_dev_ops = { + .get_dmabuf_phys = vfio_pci_core_get_dmabuf_phys, +}; + static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct vfio_pci_core_device *vdev; @@ -161,6 +165,7 @@ static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) return PTR_ERR(vdev);

dev_set_drvdata(&pdev->dev, vdev); + vdev->pci_ops = &vfio_pci_dev_ops; ret = vfio_pci_core_register_device(vdev); if (ret) goto out_put_vdev; diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c index 8f02f236b5b4..1f6008eabf23 100644 --- a/drivers/vfio/pci/vfio_pci_config.c +++ b/drivers/vfio/pci/vfio_pci_config.c @@ -589,10 +589,12 @@ static int vfio_basic_config_write(struct vfio_pci_core_device *vdev, int pos, virt_mem = !!(le16_to_cpu(*virt_cmd) & PCI_COMMAND_MEMORY); new_mem = !!(new_cmd & PCI_COMMAND_MEMORY);

- if (!new_mem) + if (!new_mem) { vfio_pci_zap_and_down_write_memory_lock(vdev); - else + vfio_pci_dma_buf_move(vdev, true); + } else { down_write(&vdev->memory_lock); + }

/* * If the user is writing mem/io enable (new_mem/io) and we @@ -627,6 +629,8 @@ static int vfio_basic_config_write(struct vfio_pci_core_device *vdev, int pos, *virt_cmd &= cpu_to_le16(~mask); *virt_cmd |= cpu_to_le16(new_cmd & mask);

+ if (__vfio_pci_memory_enabled(vdev)) + vfio_pci_dma_buf_move(vdev, false); up_write(&vdev->memory_lock); }

@@ -707,12 +711,16 @@ static int __init init_pci_cap_basic_perm(struct perm_bits *perm) static void vfio_lock_and_set_power_state(struct vfio_pci_core_device *vdev, pci_power_t state) { - if (state >= PCI_D3hot) + if (state >= PCI_D3hot) { vfio_pci_zap_and_down_write_memory_lock(vdev); - else + vfio_pci_dma_buf_move(vdev, true); + } else { down_write(&vdev->memory_lock); + }

vfio_pci_set_power_state(vdev, state); + if (__vfio_pci_memory_enabled(vdev)) + vfio_pci_dma_buf_move(vdev, false); up_write(&vdev->memory_lock); }

@@ -900,7 +908,10 @@ static int vfio_exp_config_write(struct vfio_pci_core_device *vdev, int pos,

if (!ret && (cap & PCI_EXP_DEVCAP_FLR)) { vfio_pci_zap_and_down_write_memory_lock(vdev); + vfio_pci_dma_buf_move(vdev, true); pci_try_reset_function(vdev->pdev); + if (__vfio_pci_memory_enabled(vdev)) + vfio_pci_dma_buf_move(vdev, false); up_write(&vdev->memory_lock); } } @@ -982,7 +993,10 @@ static int vfio_af_config_write(struct vfio_pci_core_device *vdev, int pos,

if (!ret && (cap & PCI_AF_CAP_FLR) && (cap & PCI_AF_CAP_TP)) { vfio_pci_zap_and_down_write_memory_lock(vdev); + vfio_pci_dma_buf_move(vdev, true); pci_try_reset_function(vdev->pdev); + if (__vfio_pci_memory_enabled(vdev)) + vfio_pci_dma_buf_move(vdev, false); up_write(&vdev->memory_lock); } } diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c index 142b84b3f225..51a3bcc26f8b 100644 --- a/drivers/vfio/pci/vfio_pci_core.c +++ b/drivers/vfio/pci/vfio_pci_core.c @@ -287,6 +287,8 @@ static int vfio_pci_runtime_pm_entry(struct vfio_pci_core_device *vdev, * semaphore. */ vfio_pci_zap_and_down_write_memory_lock(vdev); + vfio_pci_dma_buf_move(vdev, true); + if (vdev->pm_runtime_engaged) { up_write(&vdev->memory_lock); return -EINVAL; @@ -370,6 +372,8 @@ static void vfio_pci_runtime_pm_exit(struct vfio_pci_core_device *vdev) */ down_write(&vdev->memory_lock); __vfio_pci_runtime_pm_exit(vdev); + if (__vfio_pci_memory_enabled(vdev)) + vfio_pci_dma_buf_move(vdev, false); up_write(&vdev->memory_lock); }

@@ -690,6 +694,8 @@ void vfio_pci_core_close_device(struct vfio_device *core_vdev) #endif vfio_pci_core_disable(vdev);

+ vfio_pci_dma_buf_cleanup(vdev); + mutex_lock(&vdev->igate); if (vdev->err_trigger) { eventfd_ctx_put(vdev->err_trigger); @@ -1222,7 +1228,10 @@ static int vfio_pci_ioctl_reset(struct vfio_pci_core_device *vdev, */ vfio_pci_set_power_state(vdev, PCI_D0);

+ vfio_pci_dma_buf_move(vdev, true); ret = pci_try_reset_function(vdev->pdev); + if (__vfio_pci_memory_enabled(vdev)) + vfio_pci_dma_buf_move(vdev, false); up_write(&vdev->memory_lock);

return ret; @@ -1511,6 +1520,8 @@ int vfio_pci_core_ioctl_feature(struct vfio_device *device, u32 flags, return vfio_pci_core_pm_exit(vdev, flags, arg, argsz); case VFIO_DEVICE_FEATURE_PCI_VF_TOKEN: return vfio_pci_core_feature_token(vdev, flags, arg, argsz); + case VFIO_DEVICE_FEATURE_DMA_BUF: + return vfio_pci_core_feature_dma_buf(vdev, flags, arg, argsz); default: return -ENOTTY; } @@ -2095,6 +2106,7 @@ int vfio_pci_core_init_dev(struct vfio_device *core_vdev) ret = pcim_p2pdma_init(vdev->pdev); if (ret && ret != -EOPNOTSUPP) return ret; + INIT_LIST_HEAD(&vdev->dmabufs); init_rwsem(&vdev->memory_lock); xa_init(&vdev->ctx);

@@ -2459,6 +2471,7 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set, break; }

+ vfio_pci_dma_buf_move(vdev, true); vfio_pci_zap_bars(vdev); }

@@ -2487,8 +2500,11 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,

err_undo: list_for_each_entry_from_reverse(vdev, &dev_set->device_list, - vdev.dev_set_list) + vdev.dev_set_list) { + if (__vfio_pci_memory_enabled(vdev)) + vfio_pci_dma_buf_move(vdev, false); up_write(&vdev->memory_lock); + }

list_for_each_entry(vdev, &dev_set->device_list, vdev.dev_set_list) pm_runtime_put(&vdev->pdev->dev); diff --git a/drivers/vfio/pci/vfio_pci_dmabuf.c b/drivers/vfio/pci/vfio_pci_dmabuf.c new file mode 100644 index 000000000000..cbf502b14e3c --- /dev/null +++ b/drivers/vfio/pci/vfio_pci_dmabuf.c @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2025, NVIDIA CORPORATION & AFFILIATES. + */ +#include <linux/dma-buf.h> +#include <linux/pci-p2pdma.h> +#include <linux/dma-resv.h> + +#include "vfio_pci_priv.h" + +MODULE_IMPORT_NS("DMA_BUF"); + +struct vfio_pci_dma_buf { + struct dma_buf *dmabuf; + struct vfio_pci_core_device *vdev; + struct list_head dmabufs_elm; + size_t size; + struct dma_buf_phys_vec *phys_vec; + struct p2pdma_provider *provider; + u32 nr_ranges; + u8 revoked : 1; +}; + +static int vfio_pci_dma_buf_attach(struct dma_buf *dmabuf, + struct dma_buf_attachment *attachment) +{ + struct vfio_pci_dma_buf *priv = dmabuf->priv; + + if (!attachment->peer2peer) + return -EOPNOTSUPP; + + if (priv->revoked) + return -ENODEV; + + return 0; +} + +static struct sg_table * +vfio_pci_dma_buf_map(struct dma_buf_attachment *attachment, + enum dma_data_direction dir) +{ + struct vfio_pci_dma_buf *priv = attachment->dmabuf->priv; + + dma_resv_assert_held(priv->dmabuf->resv); + + if (priv->revoked) + return ERR_PTR(-ENODEV); + + return dma_buf_map(attachment, priv->provider, priv->phys_vec, + priv->nr_ranges, priv->size, dir); +} + +static void vfio_pci_dma_buf_unmap(struct dma_buf_attachment *attachment, + struct sg_table *sgt, + enum dma_data_direction dir) +{ + dma_buf_unmap(attachment, sgt, dir); +} + +static void vfio_pci_dma_buf_release(struct dma_buf *dmabuf) +{ + struct vfio_pci_dma_buf *priv = dmabuf->priv; + + /* + * Either this or vfio_pci_dma_buf_cleanup() will remove from the list. + * The refcount prevents both. + */ + if (priv->vdev) { + down_write(&priv->vdev->memory_lock); + list_del_init(&priv->dmabufs_elm); + up_write(&priv->vdev->memory_lock); + vfio_device_put_registration(&priv->vdev->vdev); + } + kfree(priv->phys_vec); + kfree(priv); +} + +static const struct dma_buf_ops vfio_pci_dmabuf_ops = { + .attach = vfio_pci_dma_buf_attach, + .map_dma_buf = vfio_pci_dma_buf_map, + .unmap_dma_buf = vfio_pci_dma_buf_unmap, + .release = vfio_pci_dma_buf_release, +}; + +int vfio_pci_core_fill_phys_vec(struct dma_buf_phys_vec *phys_vec, + struct vfio_region_dma_range *dma_ranges, + size_t nr_ranges, phys_addr_t start, + phys_addr_t len) +{ + phys_addr_t max_addr; + unsigned int i; + + max_addr = start + len; + for (i = 0; i < nr_ranges; i++) { + phys_addr_t end; + + if (!dma_ranges[i].length) + return -EINVAL; + + if (check_add_overflow(start, dma_ranges[i].offset, + &phys_vec[i].paddr) || + check_add_overflow(phys_vec[i].paddr, + dma_ranges[i].length, &end)) + return -EOVERFLOW; + if (end > max_addr) + return -EINVAL; + + phys_vec[i].len = dma_ranges[i].length; + } + return 0; +} +EXPORT_SYMBOL_GPL(vfio_pci_core_fill_phys_vec); + +int vfio_pci_core_get_dmabuf_phys(struct vfio_pci_core_device *vdev, + struct p2pdma_provider **provider, + unsigned int region_index, + struct dma_buf_phys_vec *phys_vec, + struct vfio_region_dma_range *dma_ranges, + size_t nr_ranges) +{ + struct pci_dev *pdev = vdev->pdev; + + *provider = pcim_p2pdma_provider(pdev, region_index); + if (!*provider) + return -EINVAL; + + return vfio_pci_core_fill_phys_vec( + phys_vec, dma_ranges, nr_ranges, + pci_resource_start(pdev, region_index), + pci_resource_len(pdev, region_index)); +} +EXPORT_SYMBOL_GPL(vfio_pci_core_get_dmabuf_phys); + +static int validate_dmabuf_input(struct vfio_device_feature_dma_buf *dma_buf, + struct vfio_region_dma_range *dma_ranges, + size_t *lengthp) +{ + size_t length = 0; + u32 i; + + for (i = 0; i < dma_buf->nr_ranges; i++) { + u64 offset = dma_ranges[i].offset; + u64 len = dma_ranges[i].length; + + if (!len || !PAGE_ALIGNED(offset) || !PAGE_ALIGNED(len)) + return -EINVAL; + + if (check_add_overflow(length, len, &length)) + return -EINVAL; + } + + /* + * dma_iova_try_alloc() will WARN on if userspace proposes a size that + * is too big, eg with lots of ranges. + */ + if ((u64)(length) & DMA_IOVA_USE_SWIOTLB) + return -EINVAL; + + *lengthp = length; + return 0; +} + +int vfio_pci_core_feature_dma_buf(struct vfio_pci_core_device *vdev, u32 flags, + struct vfio_device_feature_dma_buf __user *arg, + size_t argsz) +{ + struct vfio_device_feature_dma_buf get_dma_buf = {}; + struct vfio_region_dma_range *dma_ranges; + DEFINE_DMA_BUF_EXPORT_INFO(exp_info); + struct vfio_pci_dma_buf *priv; + size_t length; + int ret; + + if (!vdev->pci_ops->get_dmabuf_phys) + return -EOPNOTSUPP; + + ret = vfio_check_feature(flags, argsz, VFIO_DEVICE_FEATURE_GET, + sizeof(get_dma_buf)); + if (ret != 1) + return ret; + + if (copy_from_user(&get_dma_buf, arg, sizeof(get_dma_buf))) + return -EFAULT; + + if (!get_dma_buf.nr_ranges || get_dma_buf.flags) + return -EINVAL; + + /* + * For PCI the region_index is the BAR number like everything else. + */ + if (get_dma_buf.region_index >= VFIO_PCI_ROM_REGION_INDEX) + return -ENODEV; + + dma_ranges = memdup_array_user(&arg->dma_ranges, get_dma_buf.nr_ranges, + sizeof(*dma_ranges)); + if (IS_ERR(dma_ranges)) + return PTR_ERR(dma_ranges); + + ret = validate_dmabuf_input(&get_dma_buf, dma_ranges, &length); + if (ret) + goto err_free_ranges; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto err_free_ranges; + } + priv->phys_vec = kcalloc(get_dma_buf.nr_ranges, sizeof(*priv->phys_vec), + GFP_KERNEL); + if (!priv->phys_vec) { + ret = -ENOMEM; + goto err_free_priv; + } + + priv->vdev = vdev; + priv->nr_ranges = get_dma_buf.nr_ranges; + priv->size = length; + ret = vdev->pci_ops->get_dmabuf_phys(vdev, &priv->provider, + get_dma_buf.region_index, + priv->phys_vec, dma_ranges, + priv->nr_ranges); + if (ret) + goto err_free_phys; + + kfree(dma_ranges); + dma_ranges = NULL; + + if (!vfio_device_try_get_registration(&vdev->vdev)) { + ret = -ENODEV; + goto err_free_phys; + } + + exp_info.ops = &vfio_pci_dmabuf_ops; + exp_info.size = priv->size; + exp_info.flags = get_dma_buf.open_flags; + exp_info.priv = priv; + + priv->dmabuf = dma_buf_export(&exp_info); + if (IS_ERR(priv->dmabuf)) { + ret = PTR_ERR(priv->dmabuf); + goto err_dev_put; + } + + /* dma_buf_put() now frees priv */ + INIT_LIST_HEAD(&priv->dmabufs_elm); + down_write(&vdev->memory_lock); + dma_resv_lock(priv->dmabuf->resv, NULL); + priv->revoked = !__vfio_pci_memory_enabled(vdev); + list_add_tail(&priv->dmabufs_elm, &vdev->dmabufs); + dma_resv_unlock(priv->dmabuf->resv); + up_write(&vdev->memory_lock); + + /* + * dma_buf_fd() consumes the reference, when the file closes the dmabuf + * will be released. + */ + ret = dma_buf_fd(priv->dmabuf, get_dma_buf.open_flags); + if (ret < 0) + goto err_dma_buf; + return ret; + +err_dma_buf: + dma_buf_put(priv->dmabuf); +err_dev_put: + vfio_device_put_registration(&vdev->vdev); +err_free_phys: + kfree(priv->phys_vec); +err_free_priv: + kfree(priv); +err_free_ranges: + kfree(dma_ranges); + return ret; +} + +void vfio_pci_dma_buf_move(struct vfio_pci_core_device *vdev, bool revoked) +{ + struct vfio_pci_dma_buf *priv; + struct vfio_pci_dma_buf *tmp; + + lockdep_assert_held_write(&vdev->memory_lock); + + list_for_each_entry_safe(priv, tmp, &vdev->dmabufs, dmabufs_elm) { + if (!get_file_active(&priv->dmabuf->file)) + continue; + + if (priv->revoked != revoked) { + dma_resv_lock(priv->dmabuf->resv, NULL); + priv->revoked = revoked; + dma_buf_move_notify(priv->dmabuf); + dma_resv_unlock(priv->dmabuf->resv); + } + dma_buf_put(priv->dmabuf); + } +} + +void vfio_pci_dma_buf_cleanup(struct vfio_pci_core_device *vdev) +{ + struct vfio_pci_dma_buf *priv; + struct vfio_pci_dma_buf *tmp; + + down_write(&vdev->memory_lock); + list_for_each_entry_safe(priv, tmp, &vdev->dmabufs, dmabufs_elm) { + if (!get_file_active(&priv->dmabuf->file)) + continue; + + dma_resv_lock(priv->dmabuf->resv, NULL); + list_del_init(&priv->dmabufs_elm); + priv->vdev = NULL; + priv->revoked = true; + dma_buf_move_notify(priv->dmabuf); + dma_resv_unlock(priv->dmabuf->resv); + vfio_device_put_registration(&vdev->vdev); + fput(priv->dmabuf->file); + } + up_write(&vdev->memory_lock); +} diff --git a/drivers/vfio/pci/vfio_pci_priv.h b/drivers/vfio/pci/vfio_pci_priv.h index a9972eacb293..28a405f8b97c 100644 --- a/drivers/vfio/pci/vfio_pci_priv.h +++ b/drivers/vfio/pci/vfio_pci_priv.h @@ -107,4 +107,27 @@ static inline bool vfio_pci_is_vga(struct pci_dev *pdev) return (pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA; }

+#ifdef CONFIG_VFIO_PCI_DMABUF +int vfio_pci_core_feature_dma_buf(struct vfio_pci_core_device *vdev, u32 flags, + struct vfio_device_feature_dma_buf __user *arg, + size_t argsz); +void vfio_pci_dma_buf_cleanup(struct vfio_pci_core_device *vdev); +void vfio_pci_dma_buf_move(struct vfio_pci_core_device *vdev, bool revoked); +#else +static inline int +vfio_pci_core_feature_dma_buf(struct vfio_pci_core_device *vdev, u32 flags, + struct vfio_device_feature_dma_buf __user *arg, + size_t argsz) +{ + return -ENOTTY; +} +static inline void vfio_pci_dma_buf_cleanup(struct vfio_pci_core_device *vdev) +{ +} +static inline void vfio_pci_dma_buf_move(struct vfio_pci_core_device *vdev, + bool revoked) +{ +} +#endif + #endif diff --git a/include/linux/vfio_pci_core.h b/include/linux/vfio_pci_core.h index f541044e42a2..c9466ba323fa 100644 --- a/include/linux/vfio_pci_core.h +++ b/include/linux/vfio_pci_core.h @@ -26,6 +26,8 @@

struct vfio_pci_core_device; struct vfio_pci_region; +struct p2pdma_provider; +struct dma_buf_phys_vec;

struct vfio_pci_regops { ssize_t (*rw)(struct vfio_pci_core_device *vdev, char __user *buf, @@ -49,9 +51,48 @@ struct vfio_pci_region { u32 flags; };

+struct vfio_pci_device_ops { + int (*get_dmabuf_phys)(struct vfio_pci_core_device *vdev, + struct p2pdma_provider **provider, + unsigned int region_index, + struct dma_buf_phys_vec *phys_vec, + struct vfio_region_dma_range *dma_ranges, + size_t nr_ranges); +}; + +#if IS_ENABLED(CONFIG_VFIO_PCI_DMABUF) +int vfio_pci_core_fill_phys_vec(struct dma_buf_phys_vec *phys_vec, + struct vfio_region_dma_range *dma_ranges, + size_t nr_ranges, phys_addr_t start, + phys_addr_t len); +int vfio_pci_core_get_dmabuf_phys(struct vfio_pci_core_device *vdev, + struct p2pdma_provider **provider, + unsigned int region_index, + struct dma_buf_phys_vec *phys_vec, + struct vfio_region_dma_range *dma_ranges, + size_t nr_ranges); +#else +static inline int +vfio_pci_core_fill_phys_vec(struct dma_buf_phys_vec *phys_vec, + struct vfio_region_dma_range *dma_ranges, + size_t nr_ranges, phys_addr_t start, + phys_addr_t len) +{ + return -EINVAL; +} +static inline int vfio_pci_core_get_dmabuf_phys( + struct vfio_pci_core_device *vdev, struct p2pdma_provider **provider, + unsigned int region_index, struct dma_buf_phys_vec *phys_vec, + struct vfio_region_dma_range *dma_ranges, size_t nr_ranges) +{ + return -EOPNOTSUPP; +} +#endif + struct vfio_pci_core_device { struct vfio_device vdev; struct pci_dev *pdev; + const struct vfio_pci_device_ops *pci_ops; void __iomem *barmap[PCI_STD_NUM_BARS]; bool bar_mmap_supported[PCI_STD_NUM_BARS]; u8 *pci_config_map; @@ -94,6 +135,7 @@ struct vfio_pci_core_device { struct vfio_pci_core_device *sriov_pf_core_dev; struct notifier_block nb; struct rw_semaphore memory_lock; + struct list_head dmabufs; };

/* Will be exported for vfio pci drivers usage */ diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 75100bf009ba..ac2329f24141 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -14,6 +14,7 @@

#include <linux/types.h> #include <linux/ioctl.h> +#include <linux/stddef.h>

#define VFIO_API_VERSION 0

@@ -1478,6 +1479,33 @@ struct vfio_device_feature_bus_master { }; #define VFIO_DEVICE_FEATURE_BUS_MASTER 10

+/** + * Upon VFIO_DEVICE_FEATURE_GET create a dma_buf fd for the + * regions selected. + * + * open_flags are the typical flags passed to open(2), eg O_RDWR, O_CLOEXEC, + * etc. offset/length specify a slice of the region to create the dmabuf from. + * nr_ranges is the total number of (P2P DMA) ranges that comprise the dmabuf. + * + * flags should be 0. + * + * Return: The fd number on success, -1 and errno is set on failure. + */ +#define VFIO_DEVICE_FEATURE_DMA_BUF 11 + +struct vfio_region_dma_range { + __u64 offset; + __u64 length; +}; + +struct vfio_device_feature_dma_buf { + __u32 region_index; + __u32 open_flags; + __u32 flags; + __u32 nr_ranges; + struct vfio_region_dma_range dma_ranges[] __counted_by(nr_ranges); +}; + /* -------- API for Type1 VFIO IOMMU -------- */

/**