Welcome everyone again!
This is yet another quick update on Contiguous Memory Allocator patches. This version includes another set of code cleanups requested by Mel Gorman and a few minor bug fixes. I really hope that this version will be accepted for merging and future development will be handled by incremental patches.
ARM integration code has not been changed since v16. It provides implementation of the ideas that has been discussed during Linaro Sprint meeting in Cambourne, August 2011. Here are the details:
This version provides a solution for complete integration of CMA to DMA mapping subsystem on ARM architecture. The issue caused by double dma pages mapping and possible aliasing in coherent memory mapping has been finally resolved, both for GFP_ATOMIC case (allocations comes from coherent memory pool) and non-GFP_ATOMIC case (allocations comes from CMA managed areas).
For coherent, nommu, ARMv4 and ARMv5 systems the current DMA-mapping implementation has been kept.
For ARMv6+ systems, CMA has been enabled and a special pool of coherent memory for atomic allocations has been created. The size of this pool defaults to DEFAULT_CONSISTEN_DMA_SIZE/8, but can be changed with coherent_pool kernel parameter (if really required).
All atomic allocations are served from this pool. I've did a little simplification here, because there is no separate pool for writecombine memory - such requests are also served from coherent pool. I don't think that such simplification is a problem here - I found no driver that use dma_alloc_writecombine with GFP_ATOMIC flags.
All non-atomic allocation are served from CMA area. Kernel mappings are updated to reflect required memory attributes changes. This is possible because during early boot, all CMA area are remapped with 4KiB pages in kernel low-memory.
This version have been tested on Samsung S5PC110 based Goni machine and Exynos4 UniversalC210 board with various V4L2 multimedia drivers.
Coherent atomic allocations has been tested by manually enabling the dma bounce for the s3c-sdhci device.
All patches are prepared on top of Linux Kernel v3.3-rc2.
A few words for these who see CMA for the first time:
The Contiguous Memory Allocator (CMA) makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted.
The main difference from the similar frameworks is the fact that CMA allows to transparently reuse memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework will migrate system pages to create a required big chunk of physically contiguous memory.
For more information you can refer to nice LWN articles: http://lwn.net/Articles/447405/ and http://lwn.net/Articles/450286/ as well as links to previous versions of the CMA framework.
The CMA framework has been initially developed by Michal Nazarewicz at Samsung Poland R&D Center. Since version 9, I've taken over the development, because Michal has left the company. Since version v17 Michal is working again on CMA patches and the current version is the result of our joint open-source effort.
Best regards Marek Szyprowski Samsung Poland R&D Center
Links to previous versions of the patchset: v19: http://www.spinics.net/lists/linux-mm/msg29145.html v18: http://www.spinics.net/lists/linux-mm/msg28125.html v17: http://www.spinics.net/lists/arm-kernel/msg148499.html v16: http://www.spinics.net/lists/linux-mm/msg25066.html v15: http://www.spinics.net/lists/linux-mm/msg23365.html v14: http://www.spinics.net/lists/linux-media/msg36536.html v13: (internal, intentionally not released) v12: http://www.spinics.net/lists/linux-media/msg35674.html v11: http://www.spinics.net/lists/linux-mm/msg21868.html v10: http://www.spinics.net/lists/linux-mm/msg20761.html v9: http://article.gmane.org/gmane.linux.kernel.mm/60787 v8: http://article.gmane.org/gmane.linux.kernel.mm/56855 v7: http://article.gmane.org/gmane.linux.kernel.mm/55626 v6: http://article.gmane.org/gmane.linux.kernel.mm/55626 v5: (intentionally left out as CMA v5 was identical to CMA v4) v4: http://article.gmane.org/gmane.linux.kernel.mm/52010 v3: http://article.gmane.org/gmane.linux.kernel.mm/51573 v2: http://article.gmane.org/gmane.linux.kernel.mm/50986 v1: http://article.gmane.org/gmane.linux.kernel.mm/50669
Changelog:
v20: 1. Addressed even more comments from Mel Gorman and added his Acked-by tag on most of the core memory management patches.
2. Squashed a few minor fixes here and there (corrected alignment calculation for region limit, added adjusting low watermark level on reclaim, fixed return value of __alloc_contig_migrate_range function)
3. Removed problematic "mm: page_alloc: update migrate type of pages on pcp when isolating" patch and sligtly altered MIGRATE_CMA type handling what solved the problem
4. Rebased onto v3.3-rc2
v19: 1. Addressed another set of comments and suggestions from Mel Gorman, mainly related to breaking patches into smaller, single-feature related chunks and rewriting already existing functions in memory compaction code.
2. Reworked completely page reclaim code, removed it from split_free_page() and introduce direct call from alloc_contig_range().
3. Merged a fix from Mans Rullgard for correct cma area limit alignment.
4. Replaced broken "mm: page_alloc: set_migratetype_isolate: drain PCP prior to isolating" patch with "mm: page_alloc: update migrate type of pages on pcp when isolating" which is another attempt to solve this issue without touching free_pcppages_bulk().
5. Rebased onto v3.3-rc1
v18: 1. Addressed comments and suggestions from Mel Gorman related to changes in memory compaction code, most important points: - removed "mm: page_alloc: handle MIGRATE_ISOLATE in free_pcppages_bulk()" and moved all the logic to set_migratetype_isolate - see "mm: page_alloc: set_migratetype_isolate: drain PCP prior to isolating" patch - code in "mm: compaction: introduce isolate_{free,migrate}pages_range()" patch have been simplified and improved - removed "mm: mmzone: introduce zone_pfn_same_memmap()" patch
2. Fixed crash on initialization if HIGHMEM is available on ARM platforms
3. Fixed problems with allocation of contiguous memory if all free pages are occupied by page cache and reclaim is required.
4. Added a workaround for temporary migration failures (now CMA tries to allocate different memory block in such case), what heavily increased reliability of the CMA.
5. Minor cleanup here and there.
6. Rebased onto v3.2-rc7 kernel tree.
v17: 1. Replaced whole CMA core memory migration code to the new one kindly provided by Michal Nazarewicz. The new code is based on memory compaction framework not the memory hotplug, like it was before. This change has been suggested by Mel Godman.
2. Addressed most of the comments from Andrew Morton and Mel Gorman in the rest of the CMA code.
3. Fixed broken initialization on ARM systems with DMA zone enabled.
4. Rebased onto v3.2-rc2 kernel.
v16: 1. merged a fixup from Michal Nazarewicz to address comments from Dave Hansen about checking if pfns belong to the same memory zone
2. merged a fix from Michal Nazarewicz for incorrect handling of pages which belong to page block that is in MIGRATE_ISOLATE state, in very rare cases the migrate type of page block might have been changed from MIGRATE_CMA to MIGRATE_MOVABLE because of this bug
3. moved some common code to include/asm-generic
4. added support for x86 DMA-mapping framework for pci-dma hardware, CMA can be now even more widely tested on KVM/QEMU and a lot of common x86 boxes
5. rebased onto next-20111005 kernel tree, which includes changes in ARM DMA-mapping subsystem (CONSISTENT_DMA_SIZE removal)
6. removed patch for CMA s5p-fimc device private regions (served only as example) and provided the one that matches real life case - s5p-mfc device
v15: 1. fixed calculation of the total memory after activating CMA area (was broken from v12)
2. more code cleanup in drivers/base/dma-contiguous.c
3. added address limit for default CMA area
4. rewrote ARM DMA integration: - removed "ARM: DMA: steal memory for DMA coherent mappings" patch - kept current DMA mapping implementation for coherent, nommu and ARMv4/ARMv5 systems - enabled CMA for all ARMv6+ systems - added separate, small pool for coherent atomic allocations, defaults to CONSISTENT_DMA_SIZE/8, but can be changed with kernel parameter coherent_pool=[size]
v14: 1. Merged with "ARM: DMA: steal memory for DMA coherent mappings" patch, added support for GFP_ATOMIC allocations.
2. Added checks for NULL device pointer
v13: (internal, intentionally not released)
v12: 1. Fixed 2 nasty bugs in dma-contiguous allocator: - alignment argument was not passed correctly - range for dma_release_from_contiguous was not checked correctly
2. Added support for architecture specfic dma_contiguous_early_fixup() function
3. CMA and DMA-mapping integration for ARM architechture has been rewritten to take care of the memory aliasing issue that might happen for newer ARM CPUs (mapping of the same pages with different cache attributes is forbidden). TODO: add support for GFP_ATOMIC allocations basing on the "ARM: DMA: steal memory for DMA coherent mappings" patch and implement support for contiguous memory areas that are placed in HIGHMEM zone
v11: 1. Removed genalloc usage and replaced it with direct calls to bitmap_* functions, dropped patches that are not needed anymore (genalloc extensions)
2. Moved all contiguous area management code from mm/cma.c to drivers/base/dma-contiguous.c
3. Renamed cm_alloc/free to dma_alloc/release_from_contiguous
4. Introduced global, system wide (default) contiguous area configured with kernel config and kernel cmdline parameters
5. Simplified initialization to just one function: dma_declare_contiguous()
6. Added example of device private memory contiguous area
v10: 1. Rebased onto 3.0-rc2 and resolved all conflicts
2. Simplified CMA to be just a pure memory allocator, for use with platfrom/bus specific subsystems, like dma-mapping. Removed all device specific functions are calls.
3. Integrated with ARM DMA-mapping subsystem.
4. Code cleanup here and there.
5. Removed private context support.
v9: 1. Rebased onto 2.6.39-rc1 and resolved all conflicts
2. Fixed a bunch of nasty bugs that happened when the allocation failed (mainly kernel oops due to NULL ptr dereference).
3. Introduced testing code: cma-regions compatibility layer and videobuf2-cma memory allocator module.
v8: 1. The alloc_contig_range() function has now been separated from CMA and put in page_allocator.c. This function tries to migrate all LRU pages in specified range and then allocate the range using alloc_contig_freed_pages().
2. Support for MIGRATE_CMA has been separated from the CMA code. I have not tested if CMA works with ZONE_MOVABLE but I see no reasons why it shouldn't.
3. I have added a @private argument when creating CMA contexts so that one can reserve memory and not share it with the rest of the system. This way, CMA acts only as allocation algorithm.
v7: 1. A lot of functionality that handled driver->allocator_context mapping has been removed from the patchset. This is not to say that this code is not needed, it's just not worth posting everything in one patchset.
Currently, CMA is "just" an allocator. It uses it's own migratetype (MIGRATE_CMA) for defining ranges of pageblokcs which behave just like ZONE_MOVABLE but dispite the latter can be put in arbitrary places.
2. The migration code that was introduced in the previous version actually started working.
v6: 1. Most importantly, v6 introduces support for memory migration. The implementation is not yet complete though.
Migration support means that when CMA is not using memory reserved for it, page allocator can allocate pages from it. When CMA wants to use the memory, the pages have to be moved and/or evicted as to make room for CMA.
To make it possible it must be guaranteed that only movable and reclaimable pages are allocated in CMA controlled regions. This is done by introducing a MIGRATE_CMA migrate type that guarantees exactly that.
Some of the migration code is "borrowed" from Kamezawa Hiroyuki's alloc_contig_pages() implementation. The main difference is that thanks to MIGRATE_CMA migrate type CMA assumes that memory controlled by CMA are is always movable or reclaimable so that it makes allocation decisions regardless of the whether some pages are actually allocated and migrates them if needed.
The most interesting patches from the patchset that implement the functionality are:
09/13: mm: alloc_contig_free_pages() added 10/13: mm: MIGRATE_CMA migration type added 11/13: mm: MIGRATE_CMA isolation functions added 12/13: mm: cma: Migration support added [wip]
Currently, kernel panics in some situations which I am trying to investigate.
2. cma_pin() and cma_unpin() functions has been added (after a conversation with Johan Mossberg). The idea is that whenever hardware does not use the memory (no transaction is on) the chunk can be moved around. This would allow defragmentation to be implemented if desired. No defragmentation algorithm is provided at this time.
3. Sysfs support has been replaced with debugfs. I always felt unsure about the sysfs interface and when Greg KH pointed it out I finally got to rewrite it to debugfs.
v5: (intentionally left out as CMA v5 was identical to CMA v4)
v4: 1. The "asterisk" flag has been removed in favour of requiring that platform will provide a "*=<regions>" rule in the map attribute.
2. The terminology has been changed slightly renaming "kind" to "type" of memory. In the previous revisions, the documentation indicated that device drivers define memory kinds and now,
v3: 1. The command line parameters have been removed (and moved to a separate patch, the fourth one). As a consequence, the cma_set_defaults() function has been changed -- it no longer accepts a string with list of regions but an array of regions.
2. The "asterisk" attribute has been removed. Now, each region has an "asterisk" flag which lets one specify whether this region should by considered "asterisk" region.
3. SysFS support has been moved to a separate patch (the third one in the series) and now also includes list of regions.
v2: 1. The "cma_map" command line have been removed. In exchange, a SysFS entry has been created under kernel/mm/contiguous.
The intended way of specifying the attributes is a cma_set_defaults() function called by platform initialisation code. "regions" attribute (the string specified by "cma" command line parameter) can be overwritten with command line parameter; the other attributes can be changed during run-time using the SysFS entries.
2. The behaviour of the "map" attribute has been modified slightly. Currently, if no rule matches given device it is assigned regions specified by the "asterisk" attribute. It is by default built from the region names given in "regions" attribute.
3. Devices can register private regions as well as regions that can be shared but are not reserved using standard CMA mechanisms. A private region has no name and can be accessed only by devices that have the pointer to it.
4. The way allocators are registered has changed. Currently, a cma_allocator_register() function is used for that purpose. Moreover, allocators are attached to regions the first time memory is registered from the region or when allocator is registered which means that allocators can be dynamic modules that are loaded after the kernel booted (of course, it won't be possible to allocate a chunk of memory from a region if allocator is not loaded).
5. Index of new functions:
+static inline dma_addr_t __must_check +cma_alloc_from(const char *regions, size_t size, + dma_addr_t alignment)
+static inline int +cma_info_about(struct cma_info *info, const const char *regions)
+int __must_check cma_region_register(struct cma_region *reg);
+dma_addr_t __must_check +cma_alloc_from_region(struct cma_region *reg, + size_t size, dma_addr_t alignment);
+static inline dma_addr_t __must_check +cma_alloc_from(const char *regions, + size_t size, dma_addr_t alignment);
+int cma_allocator_register(struct cma_allocator *alloc);
Patches in this patchset:
Marek Szyprowski (6): mm: extract reclaim code from __alloc_pages_direct_reclaim() mm: trigger page reclaim in alloc_contig_range() to stabilize watermarks drivers: add Contiguous Memory Allocator X86: integrate CMA with DMA-mapping subsystem ARM: integrate CMA with DMA-mapping subsystem ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device
Michal Nazarewicz (9): mm: page_alloc: remove trailing whitespace mm: compaction: introduce isolate_migratepages_range(). mm: compaction: introduce map_pages() mm: compaction: introduce isolate_freepages_range() mm: compaction: export some of the functions mm: page_alloc: introduce alloc_contig_range() mm: page_alloc: change fallbacks array handling mm: mmzone: MIGRATE_CMA migration type added mm: page_isolation: MIGRATE_CMA isolation functions added
Documentation/kernel-parameters.txt | 9 + arch/Kconfig | 3 + arch/arm/Kconfig | 2 + arch/arm/include/asm/dma-contiguous.h | 16 ++ arch/arm/include/asm/mach/map.h | 1 + arch/arm/kernel/setup.c | 9 +- arch/arm/mm/dma-mapping.c | 368 ++++++++++++++++++++++++------ arch/arm/mm/init.c | 22 ++- arch/arm/mm/mm.h | 3 + arch/arm/mm/mmu.c | 31 ++- arch/arm/plat-s5p/dev-mfc.c | 51 +---- arch/x86/Kconfig | 1 + arch/x86/include/asm/dma-contiguous.h | 13 + arch/x86/include/asm/dma-mapping.h | 4 + arch/x86/kernel/pci-dma.c | 18 ++- arch/x86/kernel/pci-nommu.c | 8 +- arch/x86/kernel/setup.c | 2 + drivers/base/Kconfig | 89 +++++++ drivers/base/Makefile | 1 + drivers/base/dma-contiguous.c | 405 ++++++++++++++++++++++++++++++++ include/asm-generic/dma-contiguous.h | 27 ++ include/linux/device.h | 4 + include/linux/dma-contiguous.h | 110 +++++++++ include/linux/gfp.h | 12 + include/linux/mmzone.h | 38 +++- include/linux/page-isolation.h | 18 +- mm/Kconfig | 2 +- mm/Makefile | 3 +- mm/compaction.c | 418 +++++++++++++++++++++------------ mm/internal.h | 33 +++ mm/memory-failure.c | 2 +- mm/memory_hotplug.c | 6 +- mm/page_alloc.c | 377 ++++++++++++++++++++++++++--- mm/page_isolation.c | 15 +- mm/vmstat.c | 3 + 35 files changed, 1757 insertions(+), 367 deletions(-) create mode 100644 arch/arm/include/asm/dma-contiguous.h create mode 100644 arch/x86/include/asm/dma-contiguous.h create mode 100644 drivers/base/dma-contiguous.c create mode 100644 include/asm-generic/dma-contiguous.h create mode 100644 include/linux/dma-contiguous.h