From: Jason Gunthorpe jgg@nvidia.com
Reflect latest changes in p2p implementation to support DMABUF lifecycle.
Signed-off-by: Leon Romanovsky leonro@nvidia.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com --- Documentation/driver-api/pci/p2pdma.rst | 95 +++++++++++++++++++++++++-------- 1 file changed, 72 insertions(+), 23 deletions(-)
diff --git a/Documentation/driver-api/pci/p2pdma.rst b/Documentation/driver-api/pci/p2pdma.rst index d0b241628cf1..69adea45f73e 100644 --- a/Documentation/driver-api/pci/p2pdma.rst +++ b/Documentation/driver-api/pci/p2pdma.rst @@ -9,22 +9,47 @@ between two devices on the bus. This type of transaction is henceforth called Peer-to-Peer (or P2P). However, there are a number of issues that make P2P transactions tricky to do in a perfectly safe way.
-One of the biggest issues is that PCI doesn't require forwarding -transactions between hierarchy domains, and in PCIe, each Root Port -defines a separate hierarchy domain. To make things worse, there is no -simple way to determine if a given Root Complex supports this or not. -(See PCIe r4.0, sec 1.3.1). Therefore, as of this writing, the kernel -only supports doing P2P when the endpoints involved are all behind the -same PCI bridge, as such devices are all in the same PCI hierarchy -domain, and the spec guarantees that all transactions within the -hierarchy will be routable, but it does not require routing -between hierarchies. - -The second issue is that to make use of existing interfaces in Linux, -memory that is used for P2P transactions needs to be backed by struct -pages. However, PCI BARs are not typically cache coherent so there are -a few corner case gotchas with these pages so developers need to -be careful about what they do with them. +For PCIe the routing of TLPs is well defined up until they reach a host bridge +or root port. If the path includes PCIe switches then based on the ACS settings +the transaction can route entirely within the PCIe hierarchy and never reach the +root port. The kernel will evaluate the PCIe topology and always permit P2P +in these well defined cases. + +However, if the P2P transaction reaches the host bridge then it might have to +hairpin back out the same root port, be routed inside the CPU SOC to another +PCIe root port, or routed internally to the SOC. + +As this is not well defined or well supported in real HW the kernel defaults to +blocking such routing. There is an allow list to allow detecting known-good HW, +in which case P2P between any two PCIe devices will be permitted. + +Since P2P inherently is doing transactions between two devices it requires two +drivers to be co-operating inside the kernel. The providing driver has to convey +its MMIO to the consuming driver. To meet the driver model lifecycle rules the +MMIO must have all DMA mapping removed, all CPU accesses prevented, all page +table mappings undone before the providing driver completes remove(). + +This requires the providing and consuming driver to actively work together to +guarantee that the consuming driver has stopped using the MMIO during a removal +cycle. This is done by either a synchronous invalidation shutdown or waiting +for all usage refcounts to reach zero. + +At the lowest level the P2P subsystem offers a naked struct p2p_provider that +delegates lifecycle management to the providing driver. It is expected that +drivers using this option will wrap their MMIO memory in DMABUF and use DMABUF +to provide an invalidation shutdown. These MMIO pages have no struct page, and +if used with mmap() must create special PTEs. As such there are very few +kernel uAPIs that can accept pointers to them, in particular they cannot be used +with read()/write(), including O_DIRECT. + +Building on this, the subsystem offers a layer to wrap the MMIO in a ZONE_DEVICE +pgmap of MEMORY_DEVICE_PCI_P2PDMA to create struct pages. The lifecycle of +pgmap ensures that when the pgmap is destroyed all other drivers have stopped +using the MMIO. This option works with O_DIRECT flows, in some cases, if the +underlying subsystem supports handling MEMORY_DEVICE_PCI_P2PDMA through +FOLL_PCI_P2PDMA. The use of FOLL_LONGTERM is prevented. As this relies on pgmap +it also relies on architecture support along with alignment and minimum size +limitations.
Driver Writer's Guide @@ -114,14 +139,38 @@ allocating scatter-gather lists with P2P memory. Struct Page Caveats -------------------
-Driver writers should be very careful about not passing these special -struct pages to code that isn't prepared for it. At this time, the kernel -interfaces do not have any checks for ensuring this. This obviously -precludes passing these pages to userspace. +While the MEMORY_DEVICE_PCI_P2PDMA pages can be installed in VMAs, +pin_user_pages() and related will not return them unless FOLL_PCI_P2PDMA is set.
-P2P memory is also technically IO memory but should never have any side -effects behind it. Thus, the order of loads and stores should not be important -and ioreadX(), iowriteX() and friends should not be necessary. +The MEMORY_DEVICE_PCI_P2PDMA pages require care to support in the kernel. The +KVA is still MMIO and must still be accessed through the normal +readX()/writeX()/etc helpers. Direct CPU access (e.g. memcpy) is forbidden, just +like any other MMIO mapping. While this will actually work on some +architectures, others will experience corruption or just crash in the kernel. +Supporting FOLL_PCI_P2PDMA in a subsystem requires scrubbing it to ensure no CPU +access happens. + + +Usage With DMABUF +================= + +DMABUF provides an alternative to the above struct page based +client/provider/orchestrator system. In this mode the exporting driver will wrap +some of its MMIO in a DMABUF and give the DMABUF FD to userspace. + +Userspace can then pass the FD to an importing driver which will ask the +exporting driver to map it. + +In this case the initiator and target pci_devices are known and the P2P subsystem +is used to determine the mapping type. The phys_addr_t based DMA API is used to +establish the dma_addr_t. + +Lifecycle is controlled by DMABUF move_notify(), when the exporting driver wants +to remove() it must deliver an invalidation shutdown to all DMABUF importing +drivers through move_notify() and synchronously DMA unmap all the MMIO. + +No importing driver can continue to have a DMA map to the MMIO after the +exporting driver has destroyed its p2p_provider.
P2P DMA Support Library