Linaro-mm-sig May 2024

linaro-mm-sig@lists.linaro.org

27 participants
53 discussions

[RFC PATCH] dma-buf/dma-fence: Use a successful read_trylock() annotation for dma_fence_begin_signalling()

by Thomas Hellström

Condsider the following call sequence: /* Upper layer */ dma_fence_begin_signalling(); lock(tainted_shared_lock); /* Driver callback */ dma_fence_begin_signalling(); ... The driver might here use a utility that is annotated as intended for the dma-fence signalling critical path. Now if the upper layer isn't correctly annotated yet for whatever reason, resulting in /* Upper layer */ lock(tainted_shared_lock); /* Driver callback */ dma_fence_begin_signalling(); We will receive a false lockdep locking order violation notification from dma_fence_begin_signalling(). However entering a dma-fence signalling critical section itself doesn't block and could not cause a deadlock. So use a successful read_trylock() annotation instead for dma_fence_begin_signalling(). That will make sure that the locking order is correctly registered in the first case, and doesn't register any locking order in the second case. The alternative is of course to make sure that the "Upper layer" is always correctly annotated. But experience shows that's not easily achievable in all cases. Signed-off-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> --- drivers/dma-buf/dma-fence.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma-buf/dma-fence.c b/drivers/dma-buf/dma-fence.c index f177c56269bb..17f632768ef9 100644 --- a/drivers/dma-buf/dma-fence.c +++ b/drivers/dma-buf/dma-fence.c @@ -308,8 +308,8 @@ bool dma_fence_begin_signalling(void) if (in_atomic()) return true; - /* ... and non-recursive readlock */ - lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _RET_IP_); + /* ... and non-recursive successful read_trylock */ + lock_acquire(&dma_fence_lockdep_map, 0, 1, 1, 1, NULL, _RET_IP_); return false; } @@ -340,7 +340,7 @@ void __dma_fence_might_wait(void) lock_map_acquire(&dma_fence_lockdep_map); lock_map_release(&dma_fence_lockdep_map); if (tmp) - lock_acquire(&dma_fence_lockdep_map, 0, 0, 1, 1, NULL, _THIS_IP_); + lock_acquire(&dma_fence_lockdep_map, 0, 1, 1, 1, NULL, _THIS_IP_); } #endif -- 2.39.2

3 months

[PATCH v5 0/9] dma-buf: heaps: Add restricted heap

by Yong Wu

The purpose of this patchset is for MediaTek secure video playback, and also to enable other potential uses of this in the future. The 'restricted dma-heap' will be used to allocate dma_buf objects that reference memory in the secure world that is inaccessible/unmappable by the non-secure (i.e. kernel/userspace) world. That memory will be used by the secure/ trusted world to store secure information (i.e. decrypted media content). The dma_bufs allocated from the kernel will be passed to V4L2 for video decoding (as input and output). They will also be used by the drm system for rendering of the content. This patchset adds two MediaTek restricted heaps and they will be used in v4l2[1] and drm[2]. 1) restricted_mtk_cm: secure chunk memory for MediaTek SVP (Secure Video Path). The buffer is reserved for the secure world after bootup and it is used for vcodec's ES/working buffer; 2) restricted_mtk_cma: secure CMA memory for MediaTek SVP. This buffer is dynamically reserved for the secure world and will be got when we start playing secure videos. Once the security video playing is complete, the CMA will be released. This heap is used for the vcodec's frame buffer. [1] https://lore.kernel.org/linux-mediatek/20240412090851.24999-1-yunfei.dong@m… [2] https://lore.kernel.org/linux-mediatek/20240403102701.369-1-shawn.sung@medi… Change note: v5: 1) Reconstruct TEE commands to allow the kernel to obtain the PA of the TEE buffer to initialize a valid sg table. 2) Previously, PA was hidden from the kernel. Then the kernel checks if this is restricted buffer by "if (sg_page(sg) == NULL)". In this version, we will add a new explicit interface (sg_dma_is_restricted) for users to determine whether this is a restricted buffer. 3) some words improve, like using "rheap". Rebase on v6.9-rc7. v4: https://lore.kernel.org/linux-mediatek/20240112092014.23999-1-yong.wu@media… 1) Rename the heap name from "secure" to "restricted". suggested from Simon/Pekka. There are still several "secure" string in MTK file since we use ARM platform in which we call this "secure world"/ "secure command". v3: https://lore.kernel.org/linux-mediatek/20231212024607.3681-1-yong.wu@mediat… 1) Separate the secure heap to a common file(secure_heap.c) and mtk special file (secure_heap_mtk.c), and put all the tee related code into our special file. 2) About dt-binding, Add "mediatek," prefix since this is Mediatek TEE firmware definition. 3) Remove the normal CMA heap which is a draft for qcom. Rebase on v6.7-rc1. v2: https://lore.kernel.org/linux-mediatek/20231111111559.8218-1-yong.wu@mediat… 1) Move John's patches into the vcodec patchset since they use the new dma heap interface directly. https://lore.kernel.org/linux-mediatek/20231106120423.23364-1-yunfei.dong@m… 2) Reword the dt-binding description. 3) Rename the heap name from mtk_svp to secure_mtk_cm. This means the current vcodec/DRM upstream code doesn't match this. 4) Add a normal CMA heap. currently it should be a draft version. 5) Regarding the UUID, I still use hard code, but put it in a private data which allow the others could set their own UUID. What's more, UUID is necessary for the session with TEE. If we don't have it, we can't communicate with the TEE, including the get_uuid interface, which tries to make uuid more generic, not working. If there is other way to make UUID more general, please free to tell me. v1: https://lore.kernel.org/linux-mediatek/20230911023038.30649-1-yong.wu@media… Base on v6.6-rc1. Yong Wu (9): dt-bindings: reserved-memory: Add mediatek,dynamic-restricted-region scatterlist: Add a flag for the restricted memory lib/scatterlist: Add sg_dup_table dma-buf: heaps: Initialize a restricted heap dma-buf: heaps: restricted_heap: Add private heap ops dma-buf: heaps: restricted_heap: Add dma_ops dma-buf: heaps: restricted_heap: Add MediaTek restricted heap and heap_init dma-buf: heaps: restricted_heap_mtk: Add TEE memory service call dma_buf: heaps: restricted_heap_mtk: Add a new CMA heap .../mediatek,dynamic-restricted-region.yaml | 43 ++ drivers/dma-buf/heaps/Kconfig | 16 + drivers/dma-buf/heaps/Makefile | 4 +- drivers/dma-buf/heaps/restricted_heap.c | 219 +++++++++ drivers/dma-buf/heaps/restricted_heap.h | 45 ++ drivers/dma-buf/heaps/restricted_heap_mtk.c | 423 ++++++++++++++++++ drivers/dma-buf/heaps/system_heap.c | 27 +- include/linux/scatterlist.h | 36 ++ lib/scatterlist.c | 26 ++ 9 files changed, 812 insertions(+), 27 deletions(-) create mode 100644 Documentation/devicetree/bindings/reserved-memory/mediatek,dynamic-restricted-region.yaml create mode 100644 drivers/dma-buf/heaps/restricted_heap.c create mode 100644 drivers/dma-buf/heaps/restricted_heap.h create mode 100644 drivers/dma-buf/heaps/restricted_heap_mtk.c -- 2.18.0

4 months

[PATCH 0/8] dma-buf: heaps: Support carved-out heaps and ECC related-flags

by Maxime Ripard

Hi, This series is the follow-up of the discussion that John and I had a few months ago here: https://lore.kernel.org/all/CANDhNCquJn6bH3KxKf65BWiTYLVqSd9892-xtFDHHqqyrr… The initial problem we were discussing was that I'm currently working on a platform which has a memory layout with ECC enabled. However, enabling the ECC has a number of drawbacks on that platform: lower performance, increased memory usage, etc. So for things like framebuffers, the trade-off isn't great and thus there's a memory region with ECC disabled to allocate from for such use cases. After a suggestion from John, I chose to start using heap allocations flags to allow for userspace to ask for a particular ECC setup. This is then backed by a new heap type that runs from reserved memory chunks flagged as such, and the existing DT properties to specify the ECC properties. We could also easily extend this mechanism to support more flags, or through a new ioctl to discover which flags a given heap supports. I submitted a draft PR to the DT schema for the bindings used in this PR: https://github.com/devicetree-org/dt-schema/pull/138 Let me know what you think, Maxime Signed-off-by: Maxime Ripard <mripard(a)kernel.org> --- Maxime Ripard (8): dma-buf: heaps: Introduce a new heap for reserved memory of: Add helper to retrieve ECC memory bits dma-buf: heaps: Import uAPI header dma-buf: heaps: Add ECC protection flags dma-buf: heaps: system: Remove global variable dma-buf: heaps: system: Handle ECC flags dma-buf: heaps: cma: Handle ECC flags dma-buf: heaps: carveout: Handle ECC flags drivers/dma-buf/dma-heap.c | 4 + drivers/dma-buf/heaps/Kconfig | 8 + drivers/dma-buf/heaps/Makefile | 1 + drivers/dma-buf/heaps/carveout_heap.c | 330 ++++++++++++++++++++++++++++++++++ drivers/dma-buf/heaps/cma_heap.c | 10 ++ drivers/dma-buf/heaps/system_heap.c | 29 ++- include/linux/dma-heap.h | 2 + include/linux/of.h | 25 +++ include/uapi/linux/dma-heap.h | 5 +- 9 files changed, 407 insertions(+), 7 deletions(-) --- base-commit: a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6 change-id: 20240515-dma-buf-ecc-heap-28a311d2c94e Best regards, -- Maxime Ripard <mripard(a)kernel.org>

5 months, 2 weeks

Re: [PATCH v6 0/7] Add mediate-drm secure flow for SVP

by mripard＠kernel.org

On Tue, May 28, 2024 at 07:15:34AM GMT, Jason-JH Lin (林睿祥) wrote: > Hi Maxime, > > On Mon, 2024-05-27 at 16:06 +0200, Maxime Ripard wrote: > > Hi, > > > > On Sun, May 26, 2024 at 07:29:21AM GMT, Jason-JH.Lin wrote: > > > From: Jason-jh Lin <jason-jh.lin(a)mediatek.corp-partner.google.com> > > > > > > Memory Definitions: > > > secure memory - Memory allocated in the TEE (Trusted Execution > > > Environment) which is inaccessible in the REE (Rich Execution > > > Environment, i.e. linux kernel/userspace). > > > secure handle - Integer value which acts as reference to 'secure > > > memory'. Used in communication between TEE and REE to reference > > > 'secure memory'. > > > secure buffer - 'secure memory' that is used to store decrypted, > > > compressed video or for other general purposes in the TEE. > > > secure surface - 'secure memory' that is used to store graphic > > > buffers. > > > > > > Memory Usage in SVP: > > > The overall flow of SVP starts with encrypted video coming in from > > > an > > > outside source into the REE. The REE will then allocate a 'secure > > > buffer' and send the corresponding 'secure handle' along with the > > > encrypted, compressed video data to the TEE. The TEE will then > > > decrypt > > > the video and store the result in the 'secure buffer'. The REE will > > > then allocate a 'secure surface'. The REE will pass the 'secure > > > handles' for both the 'secure buffer' and 'secure surface' into the > > > TEE for video decoding. The video decoder HW will then decode the > > > contents of the 'secure buffer' and place the result in the 'secure > > > surface'. The REE will then attach the 'secure surface' to the > > > overlay > > > plane for rendering of the video. > > > > > > Everything relating to ensuring security of the actual contents of > > > the > > > 'secure buffer' and 'secure surface' is out of scope for the REE > > > and > > > is the responsibility of the TEE. > > > > > > DRM driver handles allocation of gem objects that are backed by a > > > 'secure > > > surface' and for displaying a 'secure surface' on the overlay > > > plane. > > > This introduces a new flag for object creation called > > > DRM_MTK_GEM_CREATE_RESTRICTED which indicates it should be a > > > 'secure > > > surface'. All changes here are in MediaTek specific code. > > > --- > > > TODO: > > > 1) Drop MTK_DRM_IOCTL_GEM_CREATE and use DMA_HEAP_IOCTL_ALLOC in > > > userspace > > > 2) DRM driver use secure mailbox channel to handle normal and > > > secure flow > > > 3) Implement setting mmsys routing table in the secure world series > > > > I'm not sure what you mean here. Why are you trying to upstream > > something that still needs to be removed from your patch series? > > > Because their is too much patches need to be fixed in this series, so I > list down the remaining TODO items and send to review for the other > patches. > > Sorry for the bothering, I'll drop this at the next version. If you don't intend to use it, we just shouldn't add it. Removing the TODO item doesn't make sense, even more so if heaps should be the way you handle this. > > Also, I made some comments on the previous version that have been > > entirely ignored and still apply on this version: > > > https://lore.kernel.org/dri-devel/20240415-guppy-of-perpetual-current-3a797… > > > > I lost that mail in my mailbox, so I didn't reply at that time. > I have imported that mail and replied to you. Hope you don't mind :) I haven't received that answer Maxime

6 months, 3 weeks

Re: [RFC PATCH] dma-buf: align fd_flags and heap_flags with dma_heap_allocation_data

by John Stultz

On Wed, May 22, 2024 at 2:02 AM Barry Song <21cnbao(a)gmail.com> wrote: > > From: Barry Song <v-songbaohua(a)oppo.com> > > dma_heap_allocation_data defines the UAPI as follows: > > struct dma_heap_allocation_data { > __u64 len; > __u32 fd; > __u32 fd_flags; > __u64 heap_flags; > }; > > However, dma_heap_buffer_alloc() casts them into unsigned int. It's unclear > whether this is intentional or what the purpose is, but it can be quite > confusing for users. > > Adding to the confusion, dma_heap_ops.allocate defines both of these as > unsigned long. Fortunately, since dma_heap_ops is not part of the UAPI, > it is less of a concern. > > struct dma_heap_ops { > struct dma_buf *(*allocate)(struct dma_heap *heap, > unsigned long len, > unsigned long fd_flags, > unsigned long heap_flags); > }; > > I am sending this RFC in hopes of clarifying these confusions. > > If the goal is to constrain both flags to 32 bits while ensuring the struct > is aligned to 64 bits, it would have been more suitable to define > dma_heap_allocation_data accordingly from the beginning, like so: > > struct dma_heap_allocation_data { > __u64 len; > __u32 fd; > __u32 fd_flags; > __u32 heap_flags; > __u32 padding; > }; So here, if I recall, the intent was to keep 64bits for potential future heap_flags. But your point above that we're inconsistent with types in the non UAPI arguments is valid. So I think your patch makes sense. Thanks for raising this issue! Acked-by: John Stultz <jstultz(a)google.com>

6 months, 4 weeks

[PATCH] dma-buf: add a warning when drv try to reserve 0 fence slots

by Christian König

When dma_resv_reserve_fences() is called with num_fences=0 it usually means that a driver or other component messed up its calculation how many fences are needed. Warn in that situation. When no fence are needed the function shouldn't be called in the first place. Signed-off-by: Christian König <christian.koenig(a)amd.com> --- drivers/dma-buf/dma-resv.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/dma-buf/dma-resv.c b/drivers/dma-buf/dma-resv.c index e2869fb31140..5f8d010516f0 100644 --- a/drivers/dma-buf/dma-resv.c +++ b/drivers/dma-buf/dma-resv.c @@ -186,6 +186,13 @@ int dma_resv_reserve_fences(struct dma_resv *obj, unsigned int num_fences) dma_resv_assert_held(obj); + /* Driver and component code should never call this function with + * num_fences=0. If they do it usually points to bugs when calculating + * the number of needed fences dynamically. + */ + if (WARN_ON(!num_fences)) + return -EINVAL; + old = dma_resv_fences_list(obj); if (old && old->max_fences) { if ((old->num_fences + num_fences) <= old->max_fences) -- 2.34.1

6 months, 4 weeks

Re: [PATCH] udmabuf: add CONFIG_MMU dependency

by David Hildenbrand

Am 28.05.24 um 15:31 schrieb Arnd Bergmann: > From: Arnd Bergmann <arnd(a)arndb.de> > > There is no !CONFIG_MMU version of vmf_insert_pfn(): > > arm-linux-gnueabi-ld: drivers/dma-buf/udmabuf.o: in function `udmabuf_vm_fault': > udmabuf.c:(.text+0xaa): undefined reference to `vmf_insert_pfn' > > Fixes: f7254e043ff1 ("udmabuf: use vmf_insert_pfn and VM_PFNMAP for handling mmap") > Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> > --- > drivers/dma-buf/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/dma-buf/Kconfig b/drivers/dma-buf/Kconfig > index e4dc53a36428..b46eb8a552d7 100644 > --- a/drivers/dma-buf/Kconfig > +++ b/drivers/dma-buf/Kconfig > @@ -35,6 +35,7 @@ config UDMABUF > default n > depends on DMA_SHARED_BUFFER > depends on MEMFD_CREATE || COMPILE_TEST > + depends on MMU > help > A driver to let userspace turn memfd regions into dma-bufs. > Qemu can use this to create host dmabufs for guest framebuffers. Acked-by: David Hildenbrand <david(a)redhat.com> -- Thanks, David / dhildenb

6 months, 4 weeks

Re: [PATCH v4 1/3] dt-bindings: mailbox: Add mediatek,gce-props.yaml

by AngeloGioacchino Del Regno

Il 26/05/24 17:04, Jason-JH Lin (林睿祥) ha scritto: > Hi Angelo, Jassi, > > Could you help me apply this series? > Thanks! > That's not me, it's Jassi - green light from me, btw. Cheers, Angelo > Regards, > Jason-JH.Lin > > On Wed, 2024-01-24 at 09:57 +0100, AngeloGioacchino Del Regno wrote: >> Il 24/01/24 02:14, Jason-JH.Lin ha scritto: >>> Add mediatek,gce-props.yaml for common GCE properties that is used >>> for >>> both mailbox providers and consumers. We place the common property >>> "mediatek,gce-events" in this binding currently. >>> >>> The property "mediatek,gce-events" is used for GCE event ID >>> corresponding >>> to a hardware event signal sent by the hardware or a software >>> driver. >>> If the mailbox providers or consumers want to manipulate the value >>> of >>> the event ID, they need to know the specific event ID. >>> >>> Signed-off-by: Jason-JH.Lin <jason-jh.lin(a)mediatek.com> >>> Reviewed-by: Conor Dooley <conor.dooley(a)microchip.com> >> >> Reviewed-by: AngeloGioacchino Del Regno < >> angelogioacchino.delregno(a)collabora.com> >> >

6 months, 4 weeks

Re: [PATCH v2] dma-buf: handle testing kthreads creation failure

by T.J. Mercier

On Wed, May 22, 2024 at 11:14 AM Fedor Pchelkin <pchelkin(a)ispras.ru> wrote: > > kthread creation may possibly fail inside race_signal_callback(). In > such a case stop the already started threads, put the already taken > references to them and return with error code. > > Found by Linux Verification Center (linuxtesting.org). > > Fixes: 2989f6451084 ("dma-buf: Add selftests for dma-fence") > Cc: stable(a)vger.kernel.org > Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru> Reviewed-by: T.J. Mercier <tjmercier(a)google.com> > --- > v2: use kthread_stop_put() to actually put the last reference as > T.J. Mercier noticed; > link to v1: https://lore.kernel.org/lkml/20240522122326.696928-1-pchelkin@ispras.ru/ > > drivers/dma-buf/st-dma-fence.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/dma-buf/st-dma-fence.c b/drivers/dma-buf/st-dma-fence.c > index b7c6f7ea9e0c..6a1bfcd0cc21 100644 > --- a/drivers/dma-buf/st-dma-fence.c > +++ b/drivers/dma-buf/st-dma-fence.c > @@ -540,6 +540,12 @@ static int race_signal_callback(void *arg) > t[i].before = pass; > t[i].task = kthread_run(thread_signal_callback, &t[i], > "dma-fence:%d", i); > + if (IS_ERR(t[i].task)) { > + ret = PTR_ERR(t[i].task); > + while (--i >= 0) > + kthread_stop_put(t[i].task); > + return ret; > + } > get_task_struct(t[i].task); > } > > -- > 2.39.2 >

7 months

[PATCH v6 0/7] Add mediate-drm secure flow for SVP

by Jason-JH.Lin

From: Jason-jh Lin <jason-jh.lin(a)mediatek.corp-partner.google.com> Memory Definitions: secure memory - Memory allocated in the TEE (Trusted Execution Environment) which is inaccessible in the REE (Rich Execution Environment, i.e. linux kernel/userspace). secure handle - Integer value which acts as reference to 'secure memory'. Used in communication between TEE and REE to reference 'secure memory'. secure buffer - 'secure memory' that is used to store decrypted, compressed video or for other general purposes in the TEE. secure surface - 'secure memory' that is used to store graphic buffers. Memory Usage in SVP: The overall flow of SVP starts with encrypted video coming in from an outside source into the REE. The REE will then allocate a 'secure buffer' and send the corresponding 'secure handle' along with the encrypted, compressed video data to the TEE. The TEE will then decrypt the video and store the result in the 'secure buffer'. The REE will then allocate a 'secure surface'. The REE will pass the 'secure handles' for both the 'secure buffer' and 'secure surface' into the TEE for video decoding. The video decoder HW will then decode the contents of the 'secure buffer' and place the result in the 'secure surface'. The REE will then attach the 'secure surface' to the overlay plane for rendering of the video. Everything relating to ensuring security of the actual contents of the 'secure buffer' and 'secure surface' is out of scope for the REE and is the responsibility of the TEE. DRM driver handles allocation of gem objects that are backed by a 'secure surface' and for displaying a 'secure surface' on the overlay plane. This introduces a new flag for object creation called DRM_MTK_GEM_CREATE_RESTRICTED which indicates it should be a 'secure surface'. All changes here are in MediaTek specific code. --- TODO: 1) Drop MTK_DRM_IOCTL_GEM_CREATE and use DMA_HEAP_IOCTL_ALLOC in userspace 2) DRM driver use secure mailbox channel to handle normal and secure flow 3) Implement setting mmsys routing table in the secure world series --- Based on 3 series: [1] v3 dma-buf: heaps: Add MediaTek secure heap - https://patchwork.kernel.org/project/linux-mediatek/list/?series=809023 [2] v6 media: mediatek: add driver to support secure video decoder - https://patchwork.kernel.org/project/linux-mediatek/list/?series=853689 [3] v6 Add CMDQ secure driver for SVP - https://patchwork.kernel.org/project/linux-mediatek/list/?series=855884 --- Change in v6: 1. Rebase to linux-next then rebased on 3 series [1][2][3] 2. Remove some parameter and security settings in normal world 3. Drop secure port related patches 4. Fix some build error and warning Changes in v5: 1. Sync the local changes Changes in v4: 1. Rebase on mediatek-drm-next(278640d4d74cd) and fix the conflicts 2. This series is based on 20240129063025.29251-1-yunfei.dong(a)mediatek.com 3. This series is based on 20240322052829.9893-1-shawn.sung(a)mediatek.com 4. This series is based on 20240403065603.21920-1-shawn.sung(a)mediatek.com Changes in v3: 1. fix kerneldoc problems 2. fix typo in title and commit message 3. adjust naming for secure variable 4. add the missing part for is_suecure plane implementation 5. use BIT_ULL macro to replace bit shifting 6. move modification of ovl_adaptor part to the correct patch 7. add TODO list in commit message 8. add commit message for using share memory to store execute count Changes in v2: 1. remove the DRIVER_RDNDER flag for mtk_drm_ioctl 2. move cmdq_insert_backup_cookie into client driver 3. move secure gce node define from mt8195-cherry.dtsi to mt8195.dtsi --- CK Hu (1): drm/mediatek: Add interface to allocate MediaTek GEM buffer Jason-JH.Lin (6): drm/mediatek/uapi: Add DRM_MTK_GEM_CREATE_RESTRICTED flag drm/mediatek: Add secure buffer control flow to mtk_drm_gem drm/mediatek: Add secure identify flag and funcution to mtk_drm_plane drm/mediatek: Add mtk_ddp_sec_write() to config secure buffer info drm/mediatek: Add secure flow support to mediatek-drm drm/mediatek: Add cmdq_insert_backup_cookie before secure pkt finalize drivers/gpu/drm/mediatek/mtk_crtc.c | 263 +++++++++++++++++- drivers/gpu/drm/mediatek/mtk_crtc.h | 1 + drivers/gpu/drm/mediatek/mtk_ddp_comp.c | 14 + drivers/gpu/drm/mediatek/mtk_ddp_comp.h | 5 + drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 9 +- .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 1 + drivers/gpu/drm/mediatek/mtk_drm_drv.c | 13 +- drivers/gpu/drm/mediatek/mtk_gem.c | 114 ++++++++ drivers/gpu/drm/mediatek/mtk_gem.h | 12 + drivers/gpu/drm/mediatek/mtk_mdp_rdma.c | 8 +- drivers/gpu/drm/mediatek/mtk_mdp_rdma.h | 1 + drivers/gpu/drm/mediatek/mtk_plane.c | 25 ++ drivers/gpu/drm/mediatek/mtk_plane.h | 2 + include/uapi/drm/mediatek_drm.h | 47 ++++ 14 files changed, 500 insertions(+), 15 deletions(-) create mode 100644 include/uapi/drm/mediatek_drm.h -- 2.18.0

7 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig May 2024