Linaro-mm-sig December 2024

linaro-mm-sig@lists.linaro.org

11 participants
22 discussions

Re: [PATCH v4 0/6] TEE subsystem for restricted dma-buf allocations

by Dmitry Baryshkov

On Tue, Dec 24, 2024 at 10:32:41AM +0100, Lukas Wunner wrote: > On Tue, Dec 24, 2024 at 10:28:31AM +0100, Lukas Wunner wrote: > > I did raise a concern about this to the maintainer, but to no avail: > > https://lore.kernel.org/r/Z1Kym1-9ka8kGHrM@wunner.de/ > > Sorry, wrong link. This is the one I meant to copy-paste... :( > > https://lore.kernel.org/r/Z0rPxCGdD7r8HFKb@wunner.de/ Herbert asked a logical question, which got no response from your side. -- With best wishes Dmitry

7 hours, 37 minutes

Re: [PATCH v4 0/6] TEE subsystem for restricted dma-buf allocations

by Sumit Garg

Hi Simona, On Wed, 18 Dec 2024 at 16:36, Simona Vetter <simona.vetter(a)ffwll.ch> wrote: > > On Tue, Dec 17, 2024 at 11:07:36AM +0100, Jens Wiklander wrote: > > Hi, > > > > This patch set allocates the restricted DMA-bufs via the TEE subsystem. > > > > The TEE subsystem handles the DMA-buf allocations since it is the TEE > > (OP-TEE, AMD-TEE, TS-TEE, or perhaps a future QCOMTEE) which sets up the > > restrictions for the memory used for the DMA-bufs. > > > > I've added a new IOCTL, TEE_IOC_RSTMEM_ALLOC, to allocate the restricted > > DMA-bufs. This IOCTL reaches the backend TEE driver, allowing it to choose > > how to allocate the restricted physical memory. > > > > TEE_IOC_RSTMEM_ALLOC takes in addition to a size and flags parameters also > > a use-case parameter. This is used by the backend TEE driver to decide on > > allocation policy and which devices should be able to access the memory. > > > > Three use-cases (Secure Video Playback, Trusted UI, and Secure Video > > Recording) has been identified so far to serve as examples of what can be > > expected. More use-cases can be added in userspace ABI, but it's up to the > > backend TEE drivers to provide the implementation. > > > > Each use-case has it's own restricted memory pool since different use-cases > > requires isolation from different parts of the system. A restricted memory > > pool can be based on a static carveout instantiated while probing the TEE > > backend driver, or dynamically allocated from CMA and made restricted as > > needed by the TEE. > > > > This can be tested on QEMU with the following steps: > > repo init -u https://github.com/jenswi-linaro/manifest.git -m qemu_v8.xml \ > > -b prototype/sdp-v4 > > repo sync -j8 > > cd build > > make toolchains -j$(nproc) > > make SPMC_AT_EL=1 all -j$(nproc) > > make SPMC_AT_EL=1 run-only > > # login and at the prompt: > > xtest --sdp-basic > > > > The SPMC_AT_EL=1 parameter configures the build with FF-A and an SPMC at > > S-EL1 inside OP-TEE. The parameter can be changed into SPMC_AT_EL=n to test > > without FF-A using the original SMC ABI instead. Please remember to do > > %rm -rf ../trusted-firmware-a/build/qemu > > for TF-A to be rebuilt properly using the new configuration. > > > > https://optee.readthedocs.io/en/latest/building/prerequisites.html > > list dependencies needed to build the above. > > > > The tests are pretty basic, mostly checking that a Trusted Application in > > the secure world can access and manipulate the memory. There are also some > > negative tests for out of bounds buffers etc. > > I think I've dropped this on earlier encrypted dma-buf discussions for > TEE, but can't find one right now ... Thanks for raising this query. > > Do we have some open source userspace for this? To my knowledge we have > two implementations of encrypted/content protected dma-buf in upstream > right now in the amd and intel gpu drivers, and unless I'm mistaken they > both have some minimal userspace supporting EXT_protected_textures: First of all to clarify the support Jens is adding here for allocating restricted shared memory allocation in TEE subsystem is meant to be generic and not specific to only secure media pipeline use-case. Then here we not only have open source test applications but rather open source firmware too (OP-TEE as a Trusted OS) [1] supporting this as a core feature where we maintain a stable and extensible ABI among the kernel and the OP-TEE core. Restricted memory is a feature enforced by hardware specific firewalls where a particular TEE implementation governs which particular block of memory is accessible to a particular peripheral or a CPU running in a higher privileged mode than the Linux kernel. There can be numeric use-cases surrounding that as follows: - Secure media pipeline where the contents gets decrypted and stored in a restricted buffer which are then accessible only to media display pipeline peripherals. - Trusted user interface where a peripheral takes input from the user and stores it in a restricted buffer which then is accessible to TEE implementation only. - Another possible use-case can be for the TEE implementation to store key material in a restricted buffer which is only accessible to the hardware crypto accelerator. I am sure there will be more use-cases related to this feature but those will only be possible once we provide a stable and extensible restricted memory interface among the Linux user-space and the secure world user-space (normally referred to as Trusted Applications). [1] https://github.com/OP-TEE/optee_os/pull/7159 > > https://github.com/KhronosGroup/OpenGL-Registry/blob/main/extensions/EXT/EX… > > It's not great, but it does just barely clear the bar in my opinion. I > guess something in gstreamer or similar video pipeline framework would > also do the job. > > Especially with the context of the uapi discussion in the v1/RFC thread I > think we need more than a bare-bones testcase to make sure this works in > actual use. Currently the TEE subsystem already supports a stable ABI for shared memory allocator among Linux user-space and secure world user-space here [2]. And the stable ABI for restricted memory is also along the same lines meant to be a vendor neutral abstraction for the user-space access. The current test cases not only test the interface but also perform regression tests too. I am also in favour of end to end open source use-cases. But I fear without progressing in a step wise manner as with this proposal we would rather force developers to upstream all the software pieces in one go which will be kind of a chicken and egg situation. I am sure once this feature lands Mediatek folks will be interested to port their secure video playback patchset [3] on top of it. Similarly other silicon vendors like NXP, Qcom etc. will be motivated to do the same. [2] https://docs.kernel.org/userspace-api/tee.html [3] https://lore.kernel.org/linux-arm-kernel/20240515112308.10171-1-yong.wu@med… -Sumit > > Cheers, Sima > > > > > Thanks, > > Jens > > > > Changes since V3: > > * Make the use_case and flags field in struct tee_shm u32's instead of > > u16's > > * Add more description for TEE_IOC_RSTMEM_ALLOC in the header file > > * Import namespace DMA_BUF in module tee, reported by lkp(a)intel.com > > * Added a note in the commit message for "optee: account for direction > > while converting parameters" why it's needed > > * Factor out dynamic restricted memory allocation from > > "optee: support restricted memory allocation" into two new commits > > "optee: FF-A: dynamic restricted memory allocation" and > > "optee: smc abi: dynamic restricted memory allocation" > > * Guard CMA usage with #ifdef CONFIG_CMA, effectively disabling dynamic > > restricted memory allocate if CMA isn't configured > > > > Changes since the V2 RFC: > > * Based on v6.12 > > * Replaced the flags for SVP and Trusted UID memory with a u32 field with > > unique id for each use case > > * Added dynamic allocation of restricted memory pools > > * Added OP-TEE ABI both with and without FF-A for dynamic restricted memory > > * Added support for FF-A with FFA_LEND > > > > Changes since the V1 RFC: > > * Based on v6.11 > > * Complete rewrite, replacing the restricted heap with TEE_IOC_RSTMEM_ALLOC > > > > Changes since Olivier's post [2]: > > * Based on Yong Wu's post [1] where much of dma-buf handling is done in > > the generic restricted heap > > * Simplifications and cleanup > > * New commit message for "dma-buf: heaps: add Linaro restricted dmabuf heap > > support" > > * Replaced the word "secure" with "restricted" where applicable > > > > Jens Wiklander (6): > > tee: add restricted memory allocation > > optee: account for direction while converting parameters > > optee: sync secure world ABI headers > > optee: support restricted memory allocation > > optee: FF-A: dynamic restricted memory allocation > > optee: smc abi: dynamic restricted memory allocation > > > > drivers/tee/Makefile | 1 + > > drivers/tee/optee/Makefile | 1 + > > drivers/tee/optee/call.c | 10 +- > > drivers/tee/optee/core.c | 1 + > > drivers/tee/optee/ffa_abi.c | 178 +++++++++++++- > > drivers/tee/optee/optee_ffa.h | 27 ++- > > drivers/tee/optee/optee_msg.h | 65 ++++- > > drivers/tee/optee/optee_private.h | 75 ++++-- > > drivers/tee/optee/optee_smc.h | 71 +++++- > > drivers/tee/optee/rpc.c | 31 ++- > > drivers/tee/optee/rstmem.c | 388 ++++++++++++++++++++++++++++++ > > drivers/tee/optee/smc_abi.c | 213 ++++++++++++++-- > > drivers/tee/tee_core.c | 38 ++- > > drivers/tee/tee_private.h | 2 + > > drivers/tee/tee_rstmem.c | 201 ++++++++++++++++ > > drivers/tee/tee_shm.c | 2 + > > drivers/tee/tee_shm_pool.c | 69 +++++- > > include/linux/tee_core.h | 15 ++ > > include/linux/tee_drv.h | 2 + > > include/uapi/linux/tee.h | 44 +++- > > 20 files changed, 1358 insertions(+), 76 deletions(-) > > create mode 100644 drivers/tee/optee/rstmem.c > > create mode 100644 drivers/tee/tee_rstmem.c > > > > > > base-commit: fac04efc5c793dccbd07e2d59af9f90b7fc0dca4 > > -- > > 2.43.0 > > > > -- > Simona Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch

11 hours, 2 minutes

[PATCH v4 0/6] TEE subsystem for restricted dma-buf allocations

by Jens Wiklander

Hi, This patch set allocates the restricted DMA-bufs via the TEE subsystem. The TEE subsystem handles the DMA-buf allocations since it is the TEE (OP-TEE, AMD-TEE, TS-TEE, or perhaps a future QCOMTEE) which sets up the restrictions for the memory used for the DMA-bufs. I've added a new IOCTL, TEE_IOC_RSTMEM_ALLOC, to allocate the restricted DMA-bufs. This IOCTL reaches the backend TEE driver, allowing it to choose how to allocate the restricted physical memory. TEE_IOC_RSTMEM_ALLOC takes in addition to a size and flags parameters also a use-case parameter. This is used by the backend TEE driver to decide on allocation policy and which devices should be able to access the memory. Three use-cases (Secure Video Playback, Trusted UI, and Secure Video Recording) has been identified so far to serve as examples of what can be expected. More use-cases can be added in userspace ABI, but it's up to the backend TEE drivers to provide the implementation. Each use-case has it's own restricted memory pool since different use-cases requires isolation from different parts of the system. A restricted memory pool can be based on a static carveout instantiated while probing the TEE backend driver, or dynamically allocated from CMA and made restricted as needed by the TEE. This can be tested on QEMU with the following steps: repo init -u https://github.com/jenswi-linaro/manifest.git -m qemu_v8.xml \ -b prototype/sdp-v4 repo sync -j8 cd build make toolchains -j$(nproc) make SPMC_AT_EL=1 all -j$(nproc) make SPMC_AT_EL=1 run-only # login and at the prompt: xtest --sdp-basic The SPMC_AT_EL=1 parameter configures the build with FF-A and an SPMC at S-EL1 inside OP-TEE. The parameter can be changed into SPMC_AT_EL=n to test without FF-A using the original SMC ABI instead. Please remember to do %rm -rf ../trusted-firmware-a/build/qemu for TF-A to be rebuilt properly using the new configuration. https://optee.readthedocs.io/en/latest/building/prerequisites.html list dependencies needed to build the above. The tests are pretty basic, mostly checking that a Trusted Application in the secure world can access and manipulate the memory. There are also some negative tests for out of bounds buffers etc. Thanks, Jens Changes since V3: * Make the use_case and flags field in struct tee_shm u32's instead of u16's * Add more description for TEE_IOC_RSTMEM_ALLOC in the header file * Import namespace DMA_BUF in module tee, reported by lkp(a)intel.com * Added a note in the commit message for "optee: account for direction while converting parameters" why it's needed * Factor out dynamic restricted memory allocation from "optee: support restricted memory allocation" into two new commits "optee: FF-A: dynamic restricted memory allocation" and "optee: smc abi: dynamic restricted memory allocation" * Guard CMA usage with #ifdef CONFIG_CMA, effectively disabling dynamic restricted memory allocate if CMA isn't configured Changes since the V2 RFC: * Based on v6.12 * Replaced the flags for SVP and Trusted UID memory with a u32 field with unique id for each use case * Added dynamic allocation of restricted memory pools * Added OP-TEE ABI both with and without FF-A for dynamic restricted memory * Added support for FF-A with FFA_LEND Changes since the V1 RFC: * Based on v6.11 * Complete rewrite, replacing the restricted heap with TEE_IOC_RSTMEM_ALLOC Changes since Olivier's post [2]: * Based on Yong Wu's post [1] where much of dma-buf handling is done in the generic restricted heap * Simplifications and cleanup * New commit message for "dma-buf: heaps: add Linaro restricted dmabuf heap support" * Replaced the word "secure" with "restricted" where applicable Jens Wiklander (6): tee: add restricted memory allocation optee: account for direction while converting parameters optee: sync secure world ABI headers optee: support restricted memory allocation optee: FF-A: dynamic restricted memory allocation optee: smc abi: dynamic restricted memory allocation drivers/tee/Makefile | 1 + drivers/tee/optee/Makefile | 1 + drivers/tee/optee/call.c | 10 +- drivers/tee/optee/core.c | 1 + drivers/tee/optee/ffa_abi.c | 178 +++++++++++++- drivers/tee/optee/optee_ffa.h | 27 ++- drivers/tee/optee/optee_msg.h | 65 ++++- drivers/tee/optee/optee_private.h | 75 ++++-- drivers/tee/optee/optee_smc.h | 71 +++++- drivers/tee/optee/rpc.c | 31 ++- drivers/tee/optee/rstmem.c | 388 ++++++++++++++++++++++++++++++ drivers/tee/optee/smc_abi.c | 213 ++++++++++++++-- drivers/tee/tee_core.c | 38 ++- drivers/tee/tee_private.h | 2 + drivers/tee/tee_rstmem.c | 201 ++++++++++++++++ drivers/tee/tee_shm.c | 2 + drivers/tee/tee_shm_pool.c | 69 +++++- include/linux/tee_core.h | 15 ++ include/linux/tee_drv.h | 2 + include/uapi/linux/tee.h | 44 +++- 20 files changed, 1358 insertions(+), 76 deletions(-) create mode 100644 drivers/tee/optee/rstmem.c create mode 100644 drivers/tee/tee_rstmem.c base-commit: fac04efc5c793dccbd07e2d59af9f90b7fc0dca4 -- 2.43.0

3 days, 7 hours

Re: [PATCH] drm/sched: Document run_job() refcount hazard

by Christian König

Am 20.12.24 um 15:51 schrieb Danilo Krummrich: > On Fri, Dec 20, 2024 at 03:11:34PM +0100, Philipp Stanner wrote: >> On Fri, 2024-12-20 at 14:25 +0100, Christian König wrote: >>> Am 20.12.24 um 14:18 schrieb Danilo Krummrich: >>>> On Fri, Dec 20, 2024 at 01:53:34PM +0100, Christian König wrote: >>>>> Am 20.12.24 um 13:45 schrieb Philipp Stanner: >>>>>> diff --git a/drivers/gpu/drm/scheduler/sched_main.c >>>>>> b/drivers/gpu/drm/scheduler/sched_main.c >>>>>> index 7ce25281c74c..d6f8df39d848 100644 >>>>>> --- a/drivers/gpu/drm/scheduler/sched_main.c >>>>>> +++ b/drivers/gpu/drm/scheduler/sched_main.c >>>>>> + * >>>>>> + * @sched_job: the job to run >>>>>> + * >>>>>> + * Returns: dma_fence the driver must signal once the >>>>>> hardware has >>>>>> + * completed the job ("hardware fence"). >>>>>> + * >>>>>> + * Note that the scheduler expects to 'inherit' its >>>>>> own reference to >>>>>> + * this fence from the callback. It does not invoke an >>>>>> extra >>>>>> + * dma_fence_get() on it. Consequently, this callback >>>>>> must return a >>>>>> + * fence whose refcount is at least 2: One for the >>>>>> scheduler's >>>>>> + * reference returned here, another one for the >>>>>> reference kept by the >>>>>> + * driver. >>>>> Well the driver actually doesn't need any extra reference. The >>>>> scheduler >>>>> just needs to guarantee that this reference isn't dropped before >>>>> it is >>>>> signaled. >>>> I think he means the reference the driver's fence context has to >>>> have in order >>>> to signal that thing eventually. >>> Yeah, but this is usually a weak reference. IIRC most drivers don't >>> increment the reference count for the reference they keep to signal a >>> fence. >>> >>> It's expected that the consumers of the dma_fence keep the fence >>> alive >>> at least until it is signaled. >> So are you saying that the driver having an extra reference (without >> having obtained it with dma_fence_get()) is not an issue because the >> driver is the one who will signal the fence [and then be done with it]? > It's never a "real" issue if you have multiple pointers to a reference counted > object as long as you can ensure that you hold at least one reference for the > time you have pointers to the object. Well, I'm not saying that this isn't an issue. I'm just pointing out that this is the current practice :) > But, that's bad design. For every pointer to an object a separate reference > should be taken. Yeah, completely agree. Weak references are usually a bad idea if you don't absolutely need them for something. Regards, Christian.

4 days, 2 hours

Re: [PATCH] drm/sched: Document run_job() refcount hazard

by Christian König

Am 20.12.24 um 14:18 schrieb Danilo Krummrich: > On Fri, Dec 20, 2024 at 01:53:34PM +0100, Christian König wrote: >> Am 20.12.24 um 13:45 schrieb Philipp Stanner: >>> From: Philipp Stanner <pstanner(a)redhat.com> >>> >>> drm_sched_backend_ops.run_job() returns a dma_fence for the scheduler. >>> That fence is signalled by the driver once the hardware completed the >>> associated job. The scheduler does not increment the reference count on >>> that fence, but implicitly expects to inherit this fence from run_job(). >>> >>> This is relatively subtle and prone to misunderstandings. >>> >>> This implies that, to keep a reference for itself, a driver needs to >>> call dma_fence_get() in addition to dma_fence_init() in that callback. >>> >>> It's further complicated by the fact that the scheduler even decrements >>> the refcount in drm_sched_run_job_work() since it created a new >>> reference in drm_sched_fence_scheduled(). It does, however, still use >>> its pointer to the fence after calling dma_fence_put() - which is safe >>> because of the aforementioned new reference, but actually still violates >>> the refcounting rules. >>> >>> Improve the explanatory comment for that decrement. >>> >>> Move the call to dma_fence_put() to the position behind the last usage >>> of the fence. >>> >>> Document the necessity to increment the reference count in >>> drm_sched_backend_ops.run_job(). >>> >>> Cc: Christian König <christian.koenig(a)amd.com> >>> Cc: Tvrtko Ursulin <tursulin(a)ursulin.net> >>> Cc: Andrey Grodzovsky <andrey.grodzovsky(a)amd.com> >>> Signed-off-by: Philipp Stanner <pstanner(a)redhat.com> >>> --- >>> drivers/gpu/drm/scheduler/sched_main.c | 10 +++++++--- >>> include/drm/gpu_scheduler.h | 20 ++++++++++++++++---- >>> 2 files changed, 23 insertions(+), 7 deletions(-) >>> >>> diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c >>> index 7ce25281c74c..d6f8df39d848 100644 >>> --- a/drivers/gpu/drm/scheduler/sched_main.c >>> +++ b/drivers/gpu/drm/scheduler/sched_main.c >>> + * >>> + * @sched_job: the job to run >>> + * >>> + * Returns: dma_fence the driver must signal once the hardware has >>> + * completed the job ("hardware fence"). >>> + * >>> + * Note that the scheduler expects to 'inherit' its own reference to >>> + * this fence from the callback. It does not invoke an extra >>> + * dma_fence_get() on it. Consequently, this callback must return a >>> + * fence whose refcount is at least 2: One for the scheduler's >>> + * reference returned here, another one for the reference kept by the >>> + * driver. >> Well the driver actually doesn't need any extra reference. The scheduler >> just needs to guarantee that this reference isn't dropped before it is >> signaled. > I think he means the reference the driver's fence context has to have in order > to signal that thing eventually. Yeah, but this is usually a weak reference. IIRC most drivers don't increment the reference count for the reference they keep to signal a fence. It's expected that the consumers of the dma_fence keep the fence alive at least until it is signaled. That's why we have this nice warning in dma_fence_release(). On the other hand I completely agree it would be more defensive if drivers increment the reference count for the reference they keep for signaling. So if we want to document that the fence reference count should at least be 2 we somehow need to enforce this with a warning for example. Regards, Christian. > >> Regards, >> Christian. >> >>> */ >>> struct dma_fence *(*run_job)(struct drm_sched_job *sched_job);

4 days, 4 hours

Re: [PATCH] drm/sched: Document run_job() refcount hazard

by Christian König

Am 20.12.24 um 13:45 schrieb Philipp Stanner: > From: Philipp Stanner <pstanner(a)redhat.com> > > drm_sched_backend_ops.run_job() returns a dma_fence for the scheduler. > That fence is signalled by the driver once the hardware completed the > associated job. The scheduler does not increment the reference count on > that fence, but implicitly expects to inherit this fence from run_job(). > > This is relatively subtle and prone to misunderstandings. > > This implies that, to keep a reference for itself, a driver needs to > call dma_fence_get() in addition to dma_fence_init() in that callback. > > It's further complicated by the fact that the scheduler even decrements > the refcount in drm_sched_run_job_work() since it created a new > reference in drm_sched_fence_scheduled(). It does, however, still use > its pointer to the fence after calling dma_fence_put() - which is safe > because of the aforementioned new reference, but actually still violates > the refcounting rules. > > Improve the explanatory comment for that decrement. > > Move the call to dma_fence_put() to the position behind the last usage > of the fence. > > Document the necessity to increment the reference count in > drm_sched_backend_ops.run_job(). > > Cc: Christian König <christian.koenig(a)amd.com> > Cc: Tvrtko Ursulin <tursulin(a)ursulin.net> > Cc: Andrey Grodzovsky <andrey.grodzovsky(a)amd.com> > Signed-off-by: Philipp Stanner <pstanner(a)redhat.com> > --- > drivers/gpu/drm/scheduler/sched_main.c | 10 +++++++--- > include/drm/gpu_scheduler.h | 20 ++++++++++++++++---- > 2 files changed, 23 insertions(+), 7 deletions(-) > > diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c > index 7ce25281c74c..d6f8df39d848 100644 > --- a/drivers/gpu/drm/scheduler/sched_main.c > +++ b/drivers/gpu/drm/scheduler/sched_main.c > @@ -1218,15 +1218,19 @@ static void drm_sched_run_job_work(struct work_struct *w) > drm_sched_fence_scheduled(s_fence, fence); > > if (!IS_ERR_OR_NULL(fence)) { > - /* Drop for original kref_init of the fence */ > - dma_fence_put(fence); > - > r = dma_fence_add_callback(fence, &sched_job->cb, > drm_sched_job_done_cb); > if (r == -ENOENT) > drm_sched_job_done(sched_job, fence->error); > else if (r) > DRM_DEV_ERROR(sched->dev, "fence add callback failed (%d)\n", r); > + > + /* > + * s_fence took a new reference to fence in the call to > + * drm_sched_fence_scheduled() above. The reference passed by > + * run_job() above is now not needed any longer. Drop it. > + */ > + dma_fence_put(fence); > } else { > drm_sched_job_done(sched_job, IS_ERR(fence) ? > PTR_ERR(fence) : 0); > diff --git a/include/drm/gpu_scheduler.h b/include/drm/gpu_scheduler.h > index 95e17504e46a..a1f5c9a14278 100644 > --- a/include/drm/gpu_scheduler.h > +++ b/include/drm/gpu_scheduler.h > @@ -420,10 +420,22 @@ struct drm_sched_backend_ops { > struct drm_sched_entity *s_entity); > > /** > - * @run_job: Called to execute the job once all of the dependencies > - * have been resolved. This may be called multiple times, if > - * timedout_job() has happened and drm_sched_job_recovery() > - * decides to try it again. > + * @run_job: Called to execute the job once all of the dependencies > + * have been resolved. This may be called multiple times, if > + * timedout_job() has happened and drm_sched_job_recovery() decides to > + * try it again. Maybe we should improve that here as well while at it. That drm_sched_job_recovery() can call this multiple times actually goes against the dma_fence rules since drivers can't easily allocate a new HW fence. Something like "The deprecated drm_sched_job_recovery() function might call this again, but it is strongly advised to not be used because it violates dma_fence memory allocations rules." On the other hand can of course be a separate patch. > + * > + * @sched_job: the job to run > + * > + * Returns: dma_fence the driver must signal once the hardware has > + * completed the job ("hardware fence"). > + * > + * Note that the scheduler expects to 'inherit' its own reference to > + * this fence from the callback. It does not invoke an extra > + * dma_fence_get() on it. Consequently, this callback must return a > + * fence whose refcount is at least 2: One for the scheduler's > + * reference returned here, another one for the reference kept by the > + * driver. Well the driver actually doesn't need any extra reference. The scheduler just needs to guarantee that this reference isn't dropped before it is signaled. Regards, Christian. > */ > struct dma_fence *(*run_job)(struct drm_sched_job *sched_job); >

4 days, 4 hours

[PATCH 6.1 633/772] dma-fence: Use kernels sort for merging fences

by Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> commit fe52c649438b8489c9456681d93a9b3de3d38263 upstream. One alternative to the fix Christian proposed in https://lore.kernel.org/dri-devel/20241024124159.4519-3-christian.koenig@am… is to replace the rather complex open coded sorting loops with the kernel standard sort followed by a context squashing pass. Proposed advantage of this would be readability but one concern Christian raised was that there could be many fences, that they are typically mostly sorted, and so the kernel's heap sort would be much worse by the proposed algorithm. I had a look running some games and vkcube to see what are the typical number of input fences. Tested scenarios: 1) Hogwarts Legacy under Gamescope 450 calls per second to __dma_fence_unwrap_merge. Percentages per number of fences buckets, before and after checking for signalled status, sorting and flattening: N Before After 0 0.91% 1 69.40% 2-3 28.72% 9.4% (90.6% resolved to one fence) 4-5 0.93% 6-9 0.03% 10+ 2) Cyberpunk 2077 under Gamescope 1050 calls per second, amounting to 0.01% CPU time according to perf top. N Before After 0 1.13% 1 52.30% 2-3 40.34% 55.57% 4-5 1.46% 0.50% 6-9 2.44% 10+ 2.34% 3) vkcube under Plasma 90 calls per second. N Before After 0 1 2-3 100% 0% (Ie. all resolved to a single fence) 4-5 6-9 10+ In the case of vkcube all invocations in the 2-3 bucket were actually just two input fences. >From these numbers it looks like the heap sort should not be a disadvantage, given how the dominant case is <= 2 input fences which heap sort solves with just one compare and swap. (And for the case of one input fence we have a fast path in the previous patch.) A complementary possibility is to implement a different sorting algorithm under the same API as the kernel's sort() and so keep the simplicity, potentially moving the new sort under lib/ if it would be found more widely useful. v2: * Hold on to fence references and reduce commentary. (Christian) * Record and use latest signaled timestamp in the 2nd loop too. * Consolidate zero or one fences fast paths. v3: * Reverse the seqno sort order for a simpler squashing pass. (Christian) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> Fixes: 245a4a7b531c ("dma-buf: generalize dma_fence unwrap & merging v3") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3617 Cc: Christian König <christian.koenig(a)amd.com> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Cc: Sumit Semwal <sumit.semwal(a)linaro.org> Cc: Gustavo Padovan <gustavo(a)padovan.org> Cc: Friedrich Vock <friedrich.vock(a)gmx.de> Cc: linux-media(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linaro-mm-sig(a)lists.linaro.org Cc: <stable(a)vger.kernel.org> # v6.0+ Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Christian König <christian.koenig(a)amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241115102153.1980-3-tursuli… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma-buf/dma-fence-unwrap.c | 128 ++++++++++++++--------------- 1 file changed, 61 insertions(+), 67 deletions(-) diff --git a/drivers/dma-buf/dma-fence-unwrap.c b/drivers/dma-buf/dma-fence-unwrap.c index b19d0adf6086..6345062731f1 100644 --- a/drivers/dma-buf/dma-fence-unwrap.c +++ b/drivers/dma-buf/dma-fence-unwrap.c @@ -12,6 +12,7 @@ #include <linux/dma-fence-chain.h> #include <linux/dma-fence-unwrap.h> #include <linux/slab.h> +#include <linux/sort.h> /* Internal helper to start new array iteration, don't use directly */ static struct dma_fence * @@ -59,6 +60,25 @@ struct dma_fence *dma_fence_unwrap_next(struct dma_fence_unwrap *cursor) } EXPORT_SYMBOL_GPL(dma_fence_unwrap_next); + +static int fence_cmp(const void *_a, const void *_b) +{ + struct dma_fence *a = *(struct dma_fence **)_a; + struct dma_fence *b = *(struct dma_fence **)_b; + + if (a->context < b->context) + return -1; + else if (a->context > b->context) + return 1; + + if (dma_fence_is_later(b, a)) + return 1; + else if (dma_fence_is_later(a, b)) + return -1; + + return 0; +} + /* Implementation for the dma_fence_merge() marco, don't use directly */ struct dma_fence *__dma_fence_unwrap_merge(unsigned int num_fences, struct dma_fence **fences, @@ -67,8 +87,7 @@ struct dma_fence *__dma_fence_unwrap_merge(unsigned int num_fences, struct dma_fence_array *result; struct dma_fence *tmp, **array; ktime_t timestamp; - unsigned int i; - size_t count; + int i, j, count; count = 0; timestamp = ns_to_ktime(0); @@ -96,80 +115,55 @@ struct dma_fence *__dma_fence_unwrap_merge(unsigned int num_fences, if (!array) return NULL; - /* - * This trashes the input fence array and uses it as position for the - * following merge loop. This works because the dma_fence_merge() - * wrapper macro is creating this temporary array on the stack together - * with the iterators. - */ - for (i = 0; i < num_fences; ++i) - fences[i] = dma_fence_unwrap_first(fences[i], &iter[i]); - count = 0; - do { - unsigned int sel; - -restart: - tmp = NULL; - for (i = 0; i < num_fences; ++i) { - struct dma_fence *next; - - while (fences[i] && dma_fence_is_signaled(fences[i])) - fences[i] = dma_fence_unwrap_next(&iter[i]); - - next = fences[i]; - if (!next) - continue; - - /* - * We can't guarantee that inpute fences are ordered by - * context, but it is still quite likely when this - * function is used multiple times. So attempt to order - * the fences by context as we pass over them and merge - * fences with the same context. - */ - if (!tmp || tmp->context > next->context) { - tmp = next; - sel = i; - - } else if (tmp->context < next->context) { - continue; - - } else if (dma_fence_is_later(tmp, next)) { - fences[i] = dma_fence_unwrap_next(&iter[i]); - goto restart; + for (i = 0; i < num_fences; ++i) { + dma_fence_unwrap_for_each(tmp, &iter[i], fences[i]) { + if (!dma_fence_is_signaled(tmp)) { + array[count++] = dma_fence_get(tmp); } else { - fences[sel] = dma_fence_unwrap_next(&iter[sel]); - goto restart; + ktime_t t = dma_fence_timestamp(tmp); + + if (ktime_after(t, timestamp)) + timestamp = t; } } - - if (tmp) { - array[count++] = dma_fence_get(tmp); - fences[sel] = dma_fence_unwrap_next(&iter[sel]); - } - } while (tmp); - - if (count == 0) { - tmp = dma_fence_allocate_private_stub(ktime_get()); - goto return_tmp; } - if (count == 1) { - tmp = array[0]; - goto return_tmp; - } + if (count == 0 || count == 1) + goto return_fastpath; - result = dma_fence_array_create(count, array, - dma_fence_context_alloc(1), - 1, false); - if (!result) { - for (i = 0; i < count; i++) + sort(array, count, sizeof(*array), fence_cmp, NULL); + + /* + * Only keep the most recent fence for each context. + */ + j = 0; + for (i = 1; i < count; i++) { + if (array[i]->context == array[j]->context) dma_fence_put(array[i]); - tmp = NULL; - goto return_tmp; + else + array[++j] = array[i]; } - return &result->base; + count = ++j; + + if (count > 1) { + result = dma_fence_array_create(count, array, + dma_fence_context_alloc(1), + 1, false); + if (!result) { + for (i = 0; i < count; i++) + dma_fence_put(array[i]); + tmp = NULL; + goto return_tmp; + } + return &result->base; + } + +return_fastpath: + if (count == 0) + tmp = dma_fence_allocate_private_stub(timestamp); + else + tmp = array[0]; return_tmp: kfree(array); -- 2.47.1

1 week, 5 days

[PATCH 6.1 632/772] dma-fence: Fix reference leak on fence merge failure path

by Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> commit 949291c5314009b4f6e252391edbb40fdd5d5414 upstream. Release all fence references if the output dma-fence-array could not be allocated. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> Fixes: 245a4a7b531c ("dma-buf: generalize dma_fence unwrap & merging v3") Cc: Christian König <christian.koenig(a)amd.com> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Cc: Sumit Semwal <sumit.semwal(a)linaro.org> Cc: Gustavo Padovan <gustavo(a)padovan.org> Cc: Friedrich Vock <friedrich.vock(a)gmx.de> Cc: linux-media(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linaro-mm-sig(a)lists.linaro.org Cc: <stable(a)vger.kernel.org> # v6.0+ Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Christian König <christian.koenig(a)amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241115102153.1980-2-tursuli… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma-buf/dma-fence-unwrap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/dma-buf/dma-fence-unwrap.c b/drivers/dma-buf/dma-fence-unwrap.c index 628af51c81af..b19d0adf6086 100644 --- a/drivers/dma-buf/dma-fence-unwrap.c +++ b/drivers/dma-buf/dma-fence-unwrap.c @@ -164,6 +164,8 @@ struct dma_fence *__dma_fence_unwrap_merge(unsigned int num_fences, dma_fence_context_alloc(1), 1, false); if (!result) { + for (i = 0; i < count; i++) + dma_fence_put(array[i]); tmp = NULL; goto return_tmp; } -- 2.47.1

1 week, 5 days

[PATCH 6.6 175/356] dma-fence: Use kernels sort for merging fences

by Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> commit fe52c649438b8489c9456681d93a9b3de3d38263 upstream. One alternative to the fix Christian proposed in https://lore.kernel.org/dri-devel/20241024124159.4519-3-christian.koenig@am… is to replace the rather complex open coded sorting loops with the kernel standard sort followed by a context squashing pass. Proposed advantage of this would be readability but one concern Christian raised was that there could be many fences, that they are typically mostly sorted, and so the kernel's heap sort would be much worse by the proposed algorithm. I had a look running some games and vkcube to see what are the typical number of input fences. Tested scenarios: 1) Hogwarts Legacy under Gamescope 450 calls per second to __dma_fence_unwrap_merge. Percentages per number of fences buckets, before and after checking for signalled status, sorting and flattening: N Before After 0 0.91% 1 69.40% 2-3 28.72% 9.4% (90.6% resolved to one fence) 4-5 0.93% 6-9 0.03% 10+ 2) Cyberpunk 2077 under Gamescope 1050 calls per second, amounting to 0.01% CPU time according to perf top. N Before After 0 1.13% 1 52.30% 2-3 40.34% 55.57% 4-5 1.46% 0.50% 6-9 2.44% 10+ 2.34% 3) vkcube under Plasma 90 calls per second. N Before After 0 1 2-3 100% 0% (Ie. all resolved to a single fence) 4-5 6-9 10+ In the case of vkcube all invocations in the 2-3 bucket were actually just two input fences. >From these numbers it looks like the heap sort should not be a disadvantage, given how the dominant case is <= 2 input fences which heap sort solves with just one compare and swap. (And for the case of one input fence we have a fast path in the previous patch.) A complementary possibility is to implement a different sorting algorithm under the same API as the kernel's sort() and so keep the simplicity, potentially moving the new sort under lib/ if it would be found more widely useful. v2: * Hold on to fence references and reduce commentary. (Christian) * Record and use latest signaled timestamp in the 2nd loop too. * Consolidate zero or one fences fast paths. v3: * Reverse the seqno sort order for a simpler squashing pass. (Christian) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> Fixes: 245a4a7b531c ("dma-buf: generalize dma_fence unwrap & merging v3") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3617 Cc: Christian König <christian.koenig(a)amd.com> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Cc: Sumit Semwal <sumit.semwal(a)linaro.org> Cc: Gustavo Padovan <gustavo(a)padovan.org> Cc: Friedrich Vock <friedrich.vock(a)gmx.de> Cc: linux-media(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linaro-mm-sig(a)lists.linaro.org Cc: <stable(a)vger.kernel.org> # v6.0+ Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Christian König <christian.koenig(a)amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241115102153.1980-3-tursuli… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma-buf/dma-fence-unwrap.c | 126 +++++++++++++++++-------------------- 1 file changed, 60 insertions(+), 66 deletions(-) --- a/drivers/dma-buf/dma-fence-unwrap.c +++ b/drivers/dma-buf/dma-fence-unwrap.c @@ -12,6 +12,7 @@ #include <linux/dma-fence-chain.h> #include <linux/dma-fence-unwrap.h> #include <linux/slab.h> +#include <linux/sort.h> /* Internal helper to start new array iteration, don't use directly */ static struct dma_fence * @@ -59,6 +60,25 @@ struct dma_fence *dma_fence_unwrap_next( } EXPORT_SYMBOL_GPL(dma_fence_unwrap_next); + +static int fence_cmp(const void *_a, const void *_b) +{ + struct dma_fence *a = *(struct dma_fence **)_a; + struct dma_fence *b = *(struct dma_fence **)_b; + + if (a->context < b->context) + return -1; + else if (a->context > b->context) + return 1; + + if (dma_fence_is_later(b, a)) + return 1; + else if (dma_fence_is_later(a, b)) + return -1; + + return 0; +} + /* Implementation for the dma_fence_merge() marco, don't use directly */ struct dma_fence *__dma_fence_unwrap_merge(unsigned int num_fences, struct dma_fence **fences, @@ -67,8 +87,7 @@ struct dma_fence *__dma_fence_unwrap_mer struct dma_fence_array *result; struct dma_fence *tmp, **array; ktime_t timestamp; - unsigned int i; - size_t count; + int i, j, count; count = 0; timestamp = ns_to_ktime(0); @@ -96,80 +115,55 @@ struct dma_fence *__dma_fence_unwrap_mer if (!array) return NULL; - /* - * This trashes the input fence array and uses it as position for the - * following merge loop. This works because the dma_fence_merge() - * wrapper macro is creating this temporary array on the stack together - * with the iterators. - */ - for (i = 0; i < num_fences; ++i) - fences[i] = dma_fence_unwrap_first(fences[i], &iter[i]); - count = 0; - do { - unsigned int sel; - -restart: - tmp = NULL; - for (i = 0; i < num_fences; ++i) { - struct dma_fence *next; - - while (fences[i] && dma_fence_is_signaled(fences[i])) - fences[i] = dma_fence_unwrap_next(&iter[i]); - - next = fences[i]; - if (!next) - continue; - - /* - * We can't guarantee that inpute fences are ordered by - * context, but it is still quite likely when this - * function is used multiple times. So attempt to order - * the fences by context as we pass over them and merge - * fences with the same context. - */ - if (!tmp || tmp->context > next->context) { - tmp = next; - sel = i; - - } else if (tmp->context < next->context) { - continue; - - } else if (dma_fence_is_later(tmp, next)) { - fences[i] = dma_fence_unwrap_next(&iter[i]); - goto restart; + for (i = 0; i < num_fences; ++i) { + dma_fence_unwrap_for_each(tmp, &iter[i], fences[i]) { + if (!dma_fence_is_signaled(tmp)) { + array[count++] = dma_fence_get(tmp); } else { - fences[sel] = dma_fence_unwrap_next(&iter[sel]); - goto restart; + ktime_t t = dma_fence_timestamp(tmp); + + if (ktime_after(t, timestamp)) + timestamp = t; } } + } - if (tmp) { - array[count++] = dma_fence_get(tmp); - fences[sel] = dma_fence_unwrap_next(&iter[sel]); - } - } while (tmp); + if (count == 0 || count == 1) + goto return_fastpath; - if (count == 0) { - tmp = dma_fence_allocate_private_stub(ktime_get()); - goto return_tmp; - } + sort(array, count, sizeof(*array), fence_cmp, NULL); - if (count == 1) { - tmp = array[0]; - goto return_tmp; + /* + * Only keep the most recent fence for each context. + */ + j = 0; + for (i = 1; i < count; i++) { + if (array[i]->context == array[j]->context) + dma_fence_put(array[i]); + else + array[++j] = array[i]; } + count = ++j; - result = dma_fence_array_create(count, array, - dma_fence_context_alloc(1), - 1, false); - if (!result) { - for (i = 0; i < count; i++) - dma_fence_put(array[i]); - tmp = NULL; - goto return_tmp; + if (count > 1) { + result = dma_fence_array_create(count, array, + dma_fence_context_alloc(1), + 1, false); + if (!result) { + for (i = 0; i < count; i++) + dma_fence_put(array[i]); + tmp = NULL; + goto return_tmp; + } + return &result->base; } - return &result->base; + +return_fastpath: + if (count == 0) + tmp = dma_fence_allocate_private_stub(timestamp); + else + tmp = array[0]; return_tmp: kfree(array);

1 week, 5 days

[PATCH 6.6 174/356] dma-fence: Fix reference leak on fence merge failure path

by Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> commit 949291c5314009b4f6e252391edbb40fdd5d5414 upstream. Release all fence references if the output dma-fence-array could not be allocated. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> Fixes: 245a4a7b531c ("dma-buf: generalize dma_fence unwrap & merging v3") Cc: Christian König <christian.koenig(a)amd.com> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Cc: Sumit Semwal <sumit.semwal(a)linaro.org> Cc: Gustavo Padovan <gustavo(a)padovan.org> Cc: Friedrich Vock <friedrich.vock(a)gmx.de> Cc: linux-media(a)vger.kernel.org Cc: dri-devel(a)lists.freedesktop.org Cc: linaro-mm-sig(a)lists.linaro.org Cc: <stable(a)vger.kernel.org> # v6.0+ Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Christian König <christian.koenig(a)amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241115102153.1980-2-tursuli… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma-buf/dma-fence-unwrap.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/dma-buf/dma-fence-unwrap.c +++ b/drivers/dma-buf/dma-fence-unwrap.c @@ -164,6 +164,8 @@ restart: dma_fence_context_alloc(1), 1, false); if (!result) { + for (i = 0; i < count; i++) + dma_fence_put(array[i]); tmp = NULL; goto return_tmp; }

1 week, 5 days

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig December 2024