Linaro-mm-sig May 2021

linaro-mm-sig@lists.linaro.org

19 participants
19 discussions

by Christian König

Hi guys, we are currently working an Freesync and direct scan out from system memory on AMD APUs in A+A laptops. On problem we stumbled over is that our display hardware needs to scan out from uncached system memory and we currently don't have a way to communicate that through DMA-buf. For our specific use case at hand we are going to implement something driver specific, but the question is should we have something more generic for this? After all the system memory access pattern is a PCIe extension and as such something generic. Regards, Christian.

2 years, 4 months

[PATCH -next] drm/nouveau: Remove set but not used variable 'dev'

by Baokun Li

Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/nouveau/nouveau_bo.c: In function 'nouveau_ttm_tt_populate': drivers/gpu/drm/nouveau/nouveau_bo.c:1258:17: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/nouveau/nouveau_bo.c: In function 'nouveau_ttm_tt_unpopulate': drivers/gpu/drm/nouveau/nouveau_bo.c:1281:17: warning: variable ‘dev’ set but not used [-Wunused-but-set-variable] It never used since introduction. Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- drivers/gpu/drm/nouveau/nouveau_bo.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 7a2624c0ba4c..51f9a2e6532e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -1254,7 +1254,6 @@ nouveau_ttm_tt_populate(struct ttm_device *bdev, { struct ttm_tt *ttm_dma = (void *)ttm; struct nouveau_drm *drm; - struct device *dev; bool slave = !!(ttm->page_flags & TTM_PAGE_FLAG_SG); if (ttm_tt_is_populated(ttm)) @@ -1267,7 +1266,6 @@ nouveau_ttm_tt_populate(struct ttm_device *bdev, } drm = nouveau_bdev(bdev); - dev = drm->dev->dev; return ttm_pool_alloc(&drm->ttm.bdev.pool, ttm, ctx); } @@ -1277,14 +1275,12 @@ nouveau_ttm_tt_unpopulate(struct ttm_device *bdev, struct ttm_tt *ttm) { struct nouveau_drm *drm; - struct device *dev; bool slave = !!(ttm->page_flags & TTM_PAGE_FLAG_SG); if (slave) return; drm = nouveau_bdev(bdev); - dev = drm->dev->dev; return ttm_pool_free(&drm->ttm.bdev.pool, ttm); } -- 2.25.4

3 years, 6 months

[PATCH v3] amdgpu: remove unreachable code

by Jiapeng Chong

In the function amdgpu_uvd_cs_msg(), every branch in the switch statement will have a return, so the code below the switch statement will not be executed. Eliminate the follow smatch warning: drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:845 amdgpu_uvd_cs_msg() warn: ignoring unreachable code. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- Changes in v2: -For the follow advice: https://lore.kernel.org/patchwork/patch/1435968/ drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index c6dbc08..35f6874 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -829,9 +829,8 @@ static int amdgpu_uvd_cs_msg(struct amdgpu_uvd_cs_ctx *ctx, default: DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type); - return -EINVAL; } - BUG(); + return -EINVAL; } -- 1.8.3.1

3 years, 6 months

[PATCH v4] dmabuf: Add the capability to expose DMA-BUF stats in sysfs

by Hridya Valsaraju

This patch allows statistics to be enabled for each DMA-BUF in sysfs by enabling the config CONFIG_DMABUF_SYSFS_STATS. The following stats will be exposed by the interface: /sys/kernel/dmabuf/buffers/<inode_number>/exporter_name /sys/kernel/dmabuf/buffers/<inode_number>/size /sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attach_uid>/device /sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attach_uid>/map_counter The inode_number is unique for each DMA-BUF and was added earlier [1] in order to allow userspace to track DMA-BUF usage across different processes. Currently, this information is exposed in /sys/kernel/debug/dma_buf/bufinfo. However, since debugfs is considered unsafe to be mounted in production, it is being duplicated in sysfs. Procfs also uses the proc/<pid>/fdinfo/<fd> file to expose some information about DMA-BUF fds. However, the existing procfs interfaces can only provide information about the buffers for which processes hold fds or have the buffers mmapped into their address space. The sysfs interface also exposes attachment statistics for each buffer. This information will be used to derive DMA-BUF per-exporter stats and per-device usage stats for Android Bug reports. The corresponding userspace changes can be found at [2]. Telemetry tools will also capture this information(along with other memory metrics) periodically as well as on important events like a foreground app kill (which might have been triggered by Low Memory Killer). It will also contribute to provide a snapshot of the system memory usage on other events such as OOM kills and Application Not Responding events. A shell script that can be run on a classic Linux environment to read out the DMA-BUF statistics can be found at [3](suggested by John Stultz). The patch contains the following major improvements over v1: 1) Each attachment is represented by its own directory to allow creating a symlink to the importing device and to also provide room for future expansion. 2) The number of distinct mappings of each attachment is exposed in a separate file. 3) The per-buffer statistics are now in /sys/kernel/dmabuf/buffers inorder to make the interface expandable in future. All of the improvements above are based on suggestions/feedback from Daniel Vetter and Christian König. [1]: https://lore.kernel.org/patchwork/patch/1088791/ [2]: https://android-review.googlesource.com/q/topic:%22dmabuf-sysfs%22+(status:… [3]: https://android-review.googlesource.com/c/platform/system/memory/libmeminfo… Signed-off-by: Hridya Valsaraju <hridya(a)google.com> Reported-by: kernel test robot <lkp(a)intel.com> --- Hi Daniel, I am sending the latest version of the DMA-BUF sysfs statistics patch to the list again as per your suggestion to restart the discussion on it :) Please do take a look and let me know your thoughts, thank you! Regards, Hridya Changes in v4: -Suppress uevents from kset creation to avoid waking up uevent listeners on DMA-BUF export/release. Changes in v3: -Fix a warning reported by the kernel test robot. Changes in v2: -Move statistics to /sys/kernel/dmabuf/buffers in oder to allow addition of other DMA-BUF-related sysfs stats in future. Based on feedback from Daniel Vetter. -Each attachment has its own directory to represent attaching devices as symlinks and to introduce map_count as a separate file. Based on feedback from Daniel Vetter and Christian König. Thank you both! -Commit messages updated to point to userspace code in AOSP that will read the DMA-BUF sysfs stats. .../ABI/testing/sysfs-kernel-dmabuf-buffers | 52 +++ drivers/dma-buf/Kconfig | 11 + drivers/dma-buf/Makefile | 1 + drivers/dma-buf/dma-buf-sysfs-stats.c | 300 ++++++++++++++++++ drivers/dma-buf/dma-buf-sysfs-stats.h | 62 ++++ drivers/dma-buf/dma-buf.c | 37 +++ include/linux/dma-buf.h | 20 ++ 7 files changed, 483 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-kernel-dmabuf-buffers create mode 100644 drivers/dma-buf/dma-buf-sysfs-stats.c create mode 100644 drivers/dma-buf/dma-buf-sysfs-stats.h diff --git a/Documentation/ABI/testing/sysfs-kernel-dmabuf-buffers b/Documentation/ABI/testing/sysfs-kernel-dmabuf-buffers new file mode 100644 index 000000000000..73a8c372b0f2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-dmabuf-buffers @@ -0,0 +1,52 @@ +What: /sys/kernel/dmabuf/buffers +Date: May 2021 +KernelVersion: v5.13 +Contact: Hridya Valsaraju <hridya(a)google.com> +Description: The /sys/kernel/dmabuf/buffers directory contains a + snapshot of the internal state of every DMA-BUF. + /sys/kernel/dmabuf/buffers/<inode_number> will contain the + statistics for the DMA-BUF with the unique inode number + <inode_number> +Users: kernel memory tuning/debugging tools + +What: /sys/kernel/dmabuf/buffers/<inode_number>/exporter_name +Date: May 2021 +KernelVersion: v5.13 +Contact: Hridya Valsaraju <hridya(a)google.com> +Description: This file is read-only and contains the name of the exporter of + the DMA-BUF. + +What: /sys/kernel/dmabuf/buffers/<inode_number>/size +Date: May 2021 +KernelVersion: v5.13 +Contact: Hridya Valsaraju <hridya(a)google.com> +Description: This file is read-only and specifies the size of the DMA-BUF in + bytes. + +What: /sys/kernel/dmabuf/buffers/<inode_number>/attachments +Date: May 2021 +KernelVersion: v5.13 +Contact: Hridya Valsaraju <hridya(a)google.com> +Description: This directory will contain subdirectories representing every + attachment of the DMA-BUF. + +What: /sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attachment_uid> +Date: May 2021 +KernelVersion: v5.13 +Contact: Hridya Valsaraju <hridya(a)google.com> +Description: This directory will contain information on the attaching device + and the number of current distinct device mappings. + +What: /sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attachment_uid>/device +Date: May 2021 +KernelVersion: v5.13 +Contact: Hridya Valsaraju <hridya(a)google.com> +Description: This file is read-only and is a symlink to the attaching devices's + sysfs entry. + +What: /sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attachment_uid>/map_counter +Date: May 2021 +KernelVersion: v5.13 +Contact: Hridya Valsaraju <hridya(a)google.com> +Description: This file is read-only and contains a map_counter indicating the + number of distinct device mappings of the attachment. diff --git a/drivers/dma-buf/Kconfig b/drivers/dma-buf/Kconfig index 4e16c71c24b7..9561e3d2d428 100644 --- a/drivers/dma-buf/Kconfig +++ b/drivers/dma-buf/Kconfig @@ -72,6 +72,17 @@ menuconfig DMABUF_HEAPS allows userspace to allocate dma-bufs that can be shared between drivers. +menuconfig DMABUF_SYSFS_STATS + bool "DMA-BUF sysfs statistics" + select DMA_SHARED_BUFFER + help + Choose this option to enable DMA-BUF sysfs statistics + in location /sys/kernel/dmabuf/buffers. + + /sys/kernel/dmabuf/buffers/<inode_number> will contain + statistics for the DMA-BUF with the unique inode number + <inode_number>. + source "drivers/dma-buf/heaps/Kconfig" endmenu diff --git a/drivers/dma-buf/Makefile b/drivers/dma-buf/Makefile index 995e05f609ff..40d81f23cacf 100644 --- a/drivers/dma-buf/Makefile +++ b/drivers/dma-buf/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_DMABUF_HEAPS) += heaps/ obj-$(CONFIG_SYNC_FILE) += sync_file.o obj-$(CONFIG_SW_SYNC) += sw_sync.o sync_debug.o obj-$(CONFIG_UDMABUF) += udmabuf.o +obj-$(CONFIG_DMABUF_SYSFS_STATS) += dma-buf-sysfs-stats.o dmabuf_selftests-y := \ selftest.o \ diff --git a/drivers/dma-buf/dma-buf-sysfs-stats.c b/drivers/dma-buf/dma-buf-sysfs-stats.c new file mode 100644 index 000000000000..45717c8108c8 --- /dev/null +++ b/drivers/dma-buf/dma-buf-sysfs-stats.c @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * DMA-BUF sysfs statistics. + * + * Copyright (C) 2021 Google LLC. + */ + +#include <linux/dma-buf.h> +#include <linux/dma-resv.h> +#include <linux/kobject.h> +#include <linux/printk.h> +#include <linux/slab.h> +#include <linux/sysfs.h> + +#include "dma-buf-sysfs-stats.h" + +#define to_dma_buf_entry_from_kobj(x) container_of(x, struct dma_buf_sysfs_entry, kobj) + +struct dma_buf_stats_attribute { + struct attribute attr; + ssize_t (*show)(struct dma_buf *dmabuf, + struct dma_buf_stats_attribute *attr, char *buf); +}; +#define to_dma_buf_stats_attr(x) container_of(x, struct dma_buf_stats_attribute, attr) + +static ssize_t dma_buf_stats_attribute_show(struct kobject *kobj, + struct attribute *attr, + char *buf) +{ + struct dma_buf_stats_attribute *attribute; + struct dma_buf_sysfs_entry *sysfs_entry; + struct dma_buf *dmabuf; + + attribute = to_dma_buf_stats_attr(attr); + sysfs_entry = to_dma_buf_entry_from_kobj(kobj); + dmabuf = sysfs_entry->dmabuf; + + if (!dmabuf || !attribute->show) + return -EIO; + + return attribute->show(dmabuf, attribute, buf); +} + +static const struct sysfs_ops dma_buf_stats_sysfs_ops = { + .show = dma_buf_stats_attribute_show, +}; + +static ssize_t exporter_name_show(struct dma_buf *dmabuf, + struct dma_buf_stats_attribute *attr, + char *buf) +{ + return sysfs_emit(buf, "%s\n", dmabuf->exp_name); +} + +static ssize_t size_show(struct dma_buf *dmabuf, + struct dma_buf_stats_attribute *attr, + char *buf) +{ + return sysfs_emit(buf, "%zu\n", dmabuf->size); +} + +static struct dma_buf_stats_attribute exporter_name_attribute = + __ATTR_RO(exporter_name); +static struct dma_buf_stats_attribute size_attribute = __ATTR_RO(size); + +static struct attribute *dma_buf_stats_default_attrs[] = { + &exporter_name_attribute.attr, + &size_attribute.attr, + NULL, +}; +ATTRIBUTE_GROUPS(dma_buf_stats_default); + +static void dma_buf_sysfs_release(struct kobject *kobj) +{ + struct dma_buf_sysfs_entry *sysfs_entry; + + sysfs_entry = to_dma_buf_entry_from_kobj(kobj); + kfree(sysfs_entry); +} + +static struct kobj_type dma_buf_ktype = { + .sysfs_ops = &dma_buf_stats_sysfs_ops, + .release = dma_buf_sysfs_release, + .default_groups = dma_buf_stats_default_groups, +}; + +#define to_dma_buf_attach_entry_from_kobj(x) container_of(x, struct dma_buf_attach_sysfs_entry, kobj) + +struct dma_buf_attach_stats_attribute { + struct attribute attr; + ssize_t (*show)(struct dma_buf_attach_sysfs_entry *sysfs_entry, + struct dma_buf_attach_stats_attribute *attr, char *buf); +}; +#define to_dma_buf_attach_stats_attr(x) container_of(x, struct dma_buf_attach_stats_attribute, attr) + +static ssize_t dma_buf_attach_stats_attribute_show(struct kobject *kobj, + struct attribute *attr, + char *buf) +{ + struct dma_buf_attach_stats_attribute *attribute; + struct dma_buf_attach_sysfs_entry *sysfs_entry; + + attribute = to_dma_buf_attach_stats_attr(attr); + sysfs_entry = to_dma_buf_attach_entry_from_kobj(kobj); + + if (!attribute->show) + return -EIO; + + return attribute->show(sysfs_entry, attribute, buf); +} + +static const struct sysfs_ops dma_buf_attach_stats_sysfs_ops = { + .show = dma_buf_attach_stats_attribute_show, +}; + +static ssize_t map_counter_show(struct dma_buf_attach_sysfs_entry *sysfs_entry, + struct dma_buf_attach_stats_attribute *attr, + char *buf) +{ + return sysfs_emit(buf, "%u\n", sysfs_entry->map_counter); +} + +static struct dma_buf_attach_stats_attribute map_counter_attribute = + __ATTR_RO(map_counter); + +static struct attribute *dma_buf_attach_stats_default_attrs[] = { + &map_counter_attribute.attr, + NULL, +}; +ATTRIBUTE_GROUPS(dma_buf_attach_stats_default); + +static void dma_buf_attach_sysfs_release(struct kobject *kobj) +{ + struct dma_buf_attach_sysfs_entry *sysfs_entry; + + sysfs_entry = to_dma_buf_attach_entry_from_kobj(kobj); + kfree(sysfs_entry); +} + +static struct kobj_type dma_buf_attach_ktype = { + .sysfs_ops = &dma_buf_attach_stats_sysfs_ops, + .release = dma_buf_attach_sysfs_release, + .default_groups = dma_buf_attach_stats_default_groups, +}; + +void dma_buf_attach_stats_teardown(struct dma_buf_attachment *attach) +{ + struct dma_buf_attach_sysfs_entry *sysfs_entry; + + sysfs_entry = attach->sysfs_entry; + if (!sysfs_entry) + return; + + sysfs_delete_link(&sysfs_entry->kobj, &attach->dev->kobj, "device"); + + kobject_del(&sysfs_entry->kobj); + kobject_put(&sysfs_entry->kobj); +} + +int dma_buf_attach_stats_setup(struct dma_buf_attachment *attach, + unsigned int uid) +{ + struct dma_buf_attach_sysfs_entry *sysfs_entry; + int ret; + struct dma_buf *dmabuf; + + if (!attach) + return -EINVAL; + + dmabuf = attach->dmabuf; + + sysfs_entry = kzalloc(sizeof(struct dma_buf_attach_sysfs_entry), + GFP_KERNEL); + if (!sysfs_entry) + return -ENOMEM; + + sysfs_entry->kobj.kset = dmabuf->sysfs_entry->attach_stats_kset; + + attach->sysfs_entry = sysfs_entry; + + ret = kobject_init_and_add(&sysfs_entry->kobj, &dma_buf_attach_ktype, + NULL, "%u", uid); + if (ret) + goto kobj_err; + + ret = sysfs_create_link(&sysfs_entry->kobj, &attach->dev->kobj, + "device"); + if (ret) + goto link_err; + + return 0; + +link_err: + kobject_del(&sysfs_entry->kobj); +kobj_err: + kobject_put(&sysfs_entry->kobj); + attach->sysfs_entry = NULL; + + return ret; +} +void dma_buf_stats_teardown(struct dma_buf *dmabuf) +{ + struct dma_buf_sysfs_entry *sysfs_entry; + + sysfs_entry = dmabuf->sysfs_entry; + if (!sysfs_entry) + return; + + kset_unregister(sysfs_entry->attach_stats_kset); + kobject_del(&sysfs_entry->kobj); + kobject_put(&sysfs_entry->kobj); +} + + +/* Statistics files do not need to send uevents. */ +static int dmabuf_sysfs_uevent_filter(struct kset *kset, struct kobject *kobj) +{ + return 0; +} + +static const struct kset_uevent_ops dmabuf_sysfs_no_uevent_ops = { + .filter = dmabuf_sysfs_uevent_filter, +}; + +static struct kset *dma_buf_stats_kset; +static struct kset *dma_buf_per_buffer_stats_kset; +int dma_buf_init_sysfs_statistics(void) +{ + dma_buf_stats_kset = kset_create_and_add("dmabuf", + &dmabuf_sysfs_no_uevent_ops, + kernel_kobj); + if (!dma_buf_stats_kset) + return -ENOMEM; + + dma_buf_per_buffer_stats_kset = kset_create_and_add("buffers", + &dmabuf_sysfs_no_uevent_ops, + &dma_buf_stats_kset->kobj); + if (!dma_buf_per_buffer_stats_kset) { + kset_unregister(dma_buf_stats_kset); + return -ENOMEM; + } + + return 0; +} + +void dma_buf_uninit_sysfs_statistics(void) +{ + kset_unregister(dma_buf_per_buffer_stats_kset); + kset_unregister(dma_buf_stats_kset); +} + +int dma_buf_stats_setup(struct dma_buf *dmabuf) +{ + struct dma_buf_sysfs_entry *sysfs_entry; + int ret; + struct kset *attach_stats_kset; + + if (!dmabuf || !dmabuf->file) + return -EINVAL; + + if (!dmabuf->exp_name) { + pr_err("exporter name must not be empty if stats needed\n"); + return -EINVAL; + } + + sysfs_entry = kzalloc(sizeof(struct dma_buf_sysfs_entry), GFP_KERNEL); + if (!sysfs_entry) + return -ENOMEM; + + sysfs_entry->kobj.kset = dma_buf_per_buffer_stats_kset; + sysfs_entry->dmabuf = dmabuf; + + dmabuf->sysfs_entry = sysfs_entry; + + /* create the directory for buffer stats */ + ret = kobject_init_and_add(&sysfs_entry->kobj, &dma_buf_ktype, NULL, + "%lu", file_inode(dmabuf->file)->i_ino); + if (ret) + goto err_sysfs_dmabuf; + + /* create the directory for attachment stats */ + attach_stats_kset = kset_create_and_add("attachments", + &dmabuf_sysfs_no_uevent_ops, + &sysfs_entry->kobj); + if (!attach_stats_kset) { + ret = -ENOMEM; + goto err_sysfs_attach; + } + + sysfs_entry->attach_stats_kset = attach_stats_kset; + + return 0; + +err_sysfs_attach: + kobject_del(&sysfs_entry->kobj); +err_sysfs_dmabuf: + kobject_put(&sysfs_entry->kobj); + dmabuf->sysfs_entry = NULL; + return ret; +} diff --git a/drivers/dma-buf/dma-buf-sysfs-stats.h b/drivers/dma-buf/dma-buf-sysfs-stats.h new file mode 100644 index 000000000000..5f4703249117 --- /dev/null +++ b/drivers/dma-buf/dma-buf-sysfs-stats.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * DMA-BUF sysfs statistics. + * + * Copyright (C) 2021 Google LLC. + */ + +#ifndef _DMA_BUF_SYSFS_STATS_H +#define _DMA_BUF_SYSFS_STATS_H + +#ifdef CONFIG_DMABUF_SYSFS_STATS + +int dma_buf_init_sysfs_statistics(void); +void dma_buf_uninit_sysfs_statistics(void); + +int dma_buf_stats_setup(struct dma_buf *dmabuf); +int dma_buf_attach_stats_setup(struct dma_buf_attachment *attach, + unsigned int uid); +static inline void dma_buf_update_attachment_map_count(struct dma_buf_attachment *attach, + int delta) +{ + struct dma_buf_attach_sysfs_entry *entry = attach->sysfs_entry; + + entry->map_counter += delta; +} +void dma_buf_stats_teardown(struct dma_buf *dmabuf); +void dma_buf_attach_stats_teardown(struct dma_buf_attachment *attach); +static inline unsigned int dma_buf_update_attach_uid(struct dma_buf *dmabuf) +{ + struct dma_buf_sysfs_entry *entry = dmabuf->sysfs_entry; + + return entry->attachment_uid++; +} +#else + +static inline int dma_buf_init_sysfs_statistics(void) +{ + return 0; +} + +static inline void dma_buf_uninit_sysfs_statistics(void) {} + +static inline int dma_buf_stats_setup(struct dma_buf *dmabuf) +{ + return 0; +} +static inline int dma_buf_attach_stats_setup(struct dma_buf_attachment *attach, + unsigned int uid) +{ + return 0; +} + +static inline void dma_buf_stats_teardown(struct dma_buf *dmabuf) {} +static inline void dma_buf_attach_stats_teardown(struct dma_buf_attachment *attach) {} +static inline void dma_buf_update_attachment_map_count(struct dma_buf_attachment *attach, + int delta) {} +static inline unsigned int dma_buf_update_attach_uid(struct dma_buf *dmabuf) +{ + return 0; +} +#endif +#endif // _DMA_BUF_SYSFS_STATS_H diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c index f264b70c383e..184dd7acb1ed 100644 --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c @@ -29,6 +29,8 @@ #include <uapi/linux/dma-buf.h> #include <uapi/linux/magic.h> +#include "dma-buf-sysfs-stats.h" + static inline int is_dma_buf_file(struct file *); struct dma_buf_list { @@ -79,6 +81,7 @@ static void dma_buf_release(struct dentry *dentry) if (dmabuf->resv == (struct dma_resv *)&dmabuf[1]) dma_resv_fini(dmabuf->resv); + dma_buf_stats_teardown(dmabuf); module_put(dmabuf->owner); kfree(dmabuf->name); kfree(dmabuf); @@ -580,6 +583,10 @@ struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info) file->f_mode |= FMODE_LSEEK; dmabuf->file = file; + ret = dma_buf_stats_setup(dmabuf); + if (ret) + goto err_sysfs; + mutex_init(&dmabuf->lock); INIT_LIST_HEAD(&dmabuf->attachments); @@ -589,6 +596,14 @@ struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info) return dmabuf; +err_sysfs: + /* + * Set file->f_path.dentry->d_fsdata to NULL so that when + * dma_buf_release() gets invoked by dentry_ops, it exits + * early before calling the release() dma_buf op. + */ + file->f_path.dentry->d_fsdata = NULL; + fput(file); err_dmabuf: kfree(dmabuf); err_module: @@ -723,6 +738,7 @@ dma_buf_dynamic_attach(struct dma_buf *dmabuf, struct device *dev, { struct dma_buf_attachment *attach; int ret; + unsigned int attach_uid; if (WARN_ON(!dmabuf || !dev)) return ERR_PTR(-EINVAL); @@ -748,8 +764,13 @@ dma_buf_dynamic_attach(struct dma_buf *dmabuf, struct device *dev, } dma_resv_lock(dmabuf->resv, NULL); list_add(&attach->node, &dmabuf->attachments); + attach_uid = dma_buf_update_attach_uid(dmabuf); dma_resv_unlock(dmabuf->resv); + ret = dma_buf_attach_stats_setup(attach, attach_uid); + if (ret) + goto err_sysfs; + /* When either the importer or the exporter can't handle dynamic * mappings we cache the mapping here to avoid issues with the * reservation object lock. @@ -776,6 +797,7 @@ dma_buf_dynamic_attach(struct dma_buf *dmabuf, struct device *dev, dma_resv_unlock(attach->dmabuf->resv); attach->sgt = sgt; attach->dir = DMA_BIDIRECTIONAL; + dma_buf_update_attachment_map_count(attach, 1 /* delta */); } return attach; @@ -792,6 +814,7 @@ dma_buf_dynamic_attach(struct dma_buf *dmabuf, struct device *dev, if (dma_buf_is_dynamic(attach->dmabuf)) dma_resv_unlock(attach->dmabuf->resv); +err_sysfs: dma_buf_detach(dmabuf, attach); return ERR_PTR(ret); } @@ -841,6 +864,7 @@ void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach) dma_resv_lock(attach->dmabuf->resv, NULL); __unmap_dma_buf(attach, attach->sgt, attach->dir); + dma_buf_update_attachment_map_count(attach, -1 /* delta */); if (dma_buf_is_dynamic(attach->dmabuf)) { dma_buf_unpin(attach); @@ -854,6 +878,7 @@ void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *attach) if (dmabuf->ops->detach) dmabuf->ops->detach(dmabuf, attach); + dma_buf_attach_stats_teardown(attach); kfree(attach); } EXPORT_SYMBOL_GPL(dma_buf_detach); @@ -993,6 +1018,9 @@ struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *attach, } #endif /* CONFIG_DMA_API_DEBUG */ + if (!IS_ERR(sg_table)) + dma_buf_update_attachment_map_count(attach, 1 /* delta */); + return sg_table; } EXPORT_SYMBOL_GPL(dma_buf_map_attachment); @@ -1030,6 +1058,8 @@ void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, if (dma_buf_is_dynamic(attach->dmabuf) && !IS_ENABLED(CONFIG_DMABUF_MOVE_NOTIFY)) dma_buf_unpin(attach); + + dma_buf_update_attachment_map_count(attach, -1 /* delta */); } EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment); @@ -1480,6 +1510,12 @@ static inline void dma_buf_uninit_debugfs(void) static int __init dma_buf_init(void) { + int ret; + + ret = dma_buf_init_sysfs_statistics(); + if (ret) + return ret; + dma_buf_mnt = kern_mount(&dma_buf_fs_type); if (IS_ERR(dma_buf_mnt)) return PTR_ERR(dma_buf_mnt); @@ -1495,5 +1531,6 @@ static void __exit dma_buf_deinit(void) { dma_buf_uninit_debugfs(); kern_unmount(dma_buf_mnt); + dma_buf_uninit_sysfs_statistics(); } __exitcall(dma_buf_deinit); diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index efdc56b9d95f..342585bd6dff 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -295,6 +295,9 @@ struct dma_buf_ops { * @poll: for userspace poll support * @cb_excl: for userspace poll support * @cb_shared: for userspace poll support + * @sysfs_entry: for exposing information about this buffer in sysfs. + * The attachment_uid member of @sysfs_entry is protected by dma_resv lock + * and is incremented on each attach. * * This represents a shared buffer, created by calling dma_buf_export(). The * userspace representation is a normal file descriptor, which can be created by @@ -330,6 +333,15 @@ struct dma_buf { __poll_t active; } cb_excl, cb_shared; +#ifdef CONFIG_DMABUF_SYSFS_STATS + /* for sysfs stats */ + struct dma_buf_sysfs_entry { + struct kobject kobj; + struct dma_buf *dmabuf; + unsigned int attachment_uid; + struct kset *attach_stats_kset; + } *sysfs_entry; +#endif }; /** @@ -379,6 +391,7 @@ struct dma_buf_attach_ops { * @importer_ops: importer operations for this attachment, if provided * dma_buf_map/unmap_attachment() must be called with the dma_resv lock held. * @importer_priv: importer specific attachment data. + * @sysfs_entry: For exposing information about this attachment in sysfs. * * This structure holds the attachment information between the dma_buf buffer * and its user device(s). The list contains one attachment struct per device @@ -399,6 +412,13 @@ struct dma_buf_attachment { const struct dma_buf_attach_ops *importer_ops; void *importer_priv; void *priv; +#ifdef CONFIG_DMABUF_SYSFS_STATS + /* for sysfs stats */ + struct dma_buf_attach_sysfs_entry { + struct kobject kobj; + unsigned int map_counter; + } *sysfs_entry; +#endif }; /** -- 2.31.1.818.g46aad6cb9e-goog

3 years, 6 months

Re: [Linaro-mm-sig] [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform

by Dillon Min

Hi Patrice On Mon, May 31, 2021 at 9:51 PM Patrice CHOTARD <patrice.chotard(a)foss.st.com> wrote: > > > > On 5/31/21 3:38 PM, Dillon Min wrote: > > Hi Patrice > > > > Thanks for your time to test my patch. > > > > On Mon, May 31, 2021 at 9:20 PM Patrice CHOTARD > > <patrice.chotard(a)foss.st.com> wrote: > >> > >> Hi Dillon > >> > >> > >> > >> On 5/14/21 1:02 PM, dillon.minfei(a)gmail.com wrote: > >>> From: Dillon Min <dillon.minfei(a)gmail.com> > >>> > >>> This seriese fix three i2c/clk bug for stm32 f4/f7 > >>> - kernel runing in sdram, i2c driver get data timeout > >>> - ltdc clk turn off after kernel console active > >>> - kernel hang in set ltdc clock rate > >>> > >>> clk bug found on stm32f429/f469-disco board > >>> > >>> Hi Patrice: > >>> below is the guide to verify the patch: > >>> > >>> setup test env with following files(link at below 'files link'): > >>> [1] u-boot-dtb.bin > >>> [2] rootfs zip file (used in kernel initramfs) > >>> [3] u-boot's mkimage to create itb file > >>> [4] kernel config file > >>> [5] my itb with-or-without i2c patch > >>> > >>> This patch based on kernel commit: > >>> 88b06399c9c766c283e070b022b5ceafa4f63f19 > >>> > >>> Note: > >>> panel-ilitek-ili9341.c is the driver which was submitted last year, but not > >>> get accepted. it's used to setup touch screen calibration, then test i2c. > >>> > >>> create itb file(please correct path of 'data'): > >>> ./mkimage -f stm32.its stm32.itb > >>> > >>> HW setup: > >>> console: > >>> PA9, PA10 > >>> usart0 > >>> serial@40011000 > >>> 115200 8n1 > >>> > >>> -- flash u-boot.bin to stm32f429-disco on PC > >>> $ sudo openocd -f board/stm32f429discovery.cfg -c \ > >>> '{PATH-TO-YOUR-UBOOT}/u-boot-dtb.bin 0x08000000 exit reset' > >>> > >>> -- setup kernel load bootargs at u-boot > >>> U-Boot > setenv bootargs 'console=tty0 console=ttySTM0,115200 > >>> root=/dev/ram rdinit=/linuxrc loglevel=8 fbcon=rotate:2' > >>> U-Boot > loady;bootm > >>> (download stm32.dtb or your kernel with itb format, or download zImage, dtb) > >>> > >> > >> > >> Thanks for these informations > >> I was able to load and boot DTB and uImage directly in SDRAM as you suggested, > >> i saw Linux logo and kernel log on the STM32F429-disco display, > >> but i can't reach the login. > >> > >> The last kernel log i got is : > >> > >> Starting kernel ... > >> > >> [ 0.000000] Booting Linux on physical CPU 0x0 > >> [ 0.000000] Linux version 5.13.0-rc1-00082-g9dbbd5cb6240-dirty (nxp11987(a)lmecxl0573.lme1 > >> [ 0.000000] CPU: ARMv7-M [410fc241] revision 1 (ARMv7M), cr=00000000 > >> [ 0.000000] CPU: unknown data cache, unknown instruction cache > >> [ 0.000000] OF: fdt: Machine model: STMicroelectronics STM32F429i-DISCO board > >> [ 0.000000] Zone ranges: > >> [ 0.000000] Normal [mem 0x0000000090000000-0x00000000907fffff] > >> [ 0.000000] Movable zone start for each node > >> [ 0.000000] Early memory node ranges > >> > >> [...] > >> > >> [ 2.637564] printk: console [ttySTM0] enabled > >> [ 2.747984] panel-ilitek-ili9341 spi0.1: get optional vcc failed > >> [ 2.758986] spi_stm32 40015000.spi: driver initialized > >> [ 2.795733] i2c /dev entries driver > >> [ 2.849955] stmpe-i2c 0-0041: stmpe811 detected, chip id: 0x811 > >> [ 2.922030] stmpe-ts stmpe-ts: DMA mask not set > >> [ 2.965729] input: stmpe-ts as /devices/platform/soc/40005c00.i2c/i2c-0/0-0041/stmpe-ts0 > >> [ 2.991570] stm32f4-i2c 40005c00.i2c: STM32F4 I2C driver registered > >> [ 3.058262] [drm] Initialized stm 1.0.0 20170330 for 40016800.display-controller on min0 > >> [ 3.665951] panel-ilitek-ili9341 spi0.1: initialized display rgb interface > >> [ 3.765208] Console: switching to colour frame buffer device 30x40 > >> [ 4.014269] stm32-display 40016800.display-controller: [drm] fb0: stmdrmfb frame buffere > >> [ 4.212737] Freeing unused kernel memory: 324K > >> [ 4.287300] This architecture does not have kernel memory protection. > >> [ 4.401202] Run /linuxrc as init process > >> [ 4.478622] with arguments: > >> [ 4.555069] /linuxrc > >> [ 4.595406] with environment: > >> [ 4.672213] HOME=/ > >> [ 4.712511] TERM=linux > >> [ 206.785289] random: crng init done > > > > I guess you didn't add the rootfs to uImage I sent you. > > I do use your rootfs > > > Could you post all the logs from u-boot startup to kernel log end. > > > U-Boot 2021.07-rc2 (May 28 2021 - 17:05:35 +0200) > > DRAM: 8 MiB > Flash: 2 MiB > Loading Environment from Flash... OK > In: serial@40011000 > Out: serial@40011000 > Err: serial@40011000 > Hit any key to stop autoboot: 0 > U-Boot > setenv bootargs 'console=tty0 console=ttySTM0,115200 root=/dev/ram rdinit=/lin' It seems bootargs are broken here. should be setenv bootargs 'console=tty0 console=ttySTM0,115200 root=/dev/ram rdinit=/linuxrc loglevel=8 fbcon=rotate:2' > U-Boot > > U-Boot > > U-Boot > setenv loadaddr 0x90400000 > U-Boot > loady > ## Ready for binary (ymodem) download to 0x90400000 at 115200 bps... > CxyzModem - CRC mode, 156(SOH)/0(STX)/0(CAN) packets, 7 retries > ## Total Size = 0x00004cad = 19629 Bytes > U-Boot > setenv loadaddr 0x90406000 > U-Boot > loady > ## Ready for binary (ymodem) download to 0x90406000 at 115200 bps... > C- CRC mode, 12453(SOH)/0(STX)/0(CAN) packets, 4 retries > ## Total Size = 0x00185140 = 1593664 Bytes > U-Boot > bootm 0x90406000 - 0x90400000 > ## Booting kernel from Legacy Image at 90406000 ... > Image Name: Linux-5.13.0-rc1-00082-g9dbbd5cb > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 1593600 Bytes = 1.5 MiB > Load Address: 90008000 > Entry Point: 90008000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 90400000 > Booting using the fdt blob at 0x90400000 > Loading Kernel Image > Loading Device Tree to 905b9000, end 905c0cac ... OK > > Starting kernel ... > > [ 0.000000] Booting Linux on physical CPU 0x0 > [ 0.000000] Linux version 5.13.0-rc1-00082-g9dbbd5cb6240-dirty (nxp11987(a)lmecxl0573.lme1 > [ 0.000000] CPU: ARMv7-M [410fc241] revision 1 (ARMv7M), cr=00000000 > [ 0.000000] CPU: unknown data cache, unknown instruction cache > [ 0.000000] OF: fdt: Machine model: STMicroelectronics STM32F429i-DISCO board > [ 0.000000] Zone ranges: > [ 0.000000] Normal [mem 0x0000000090000000-0x00000000907fffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000907fffff] > [ 0.000000] Initmem setup node 0 [mem 0x0000000090000000-0x00000000907fffff] > [ 0.000000] On node 0 totalpages: 2048 > [ 0.000000] Normal zone: 16 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 2048 pages, LIFO batch:0 > [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 2032 > [ 0.000000] Kernel command line: console=tty0 console=ttySTM0,115200 root=/dev/ram rdin2 ditto > [ 0.000000] Dentry cache hash table entries: 1024 (order: 0, 4096 bytes, linear) > [ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) > [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off > [ 0.000000] Memory: 5264K/8192K available (1372K kernel code, 302K rwdata, 516K rodata,) > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] rcu: Preemptible hierarchical RCU implementation. > [ 0.000000] rcu: RCU event tracing is enabled. > [ 0.000000] Trampoline variant of Tasks RCU enabled. > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. > [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 > [ 0.000000] /soc/interrupt-controller@40013c00: bank0 > [ 0.000000] random: get_random_bytes called from start_kernel+0x203/0x370 with crng_ini0 > [ 0.000000] clocksource: arm_system_timer: mask: 0xffffff max_cycles: 0xffffff, max_idls > [ 0.000000] ARM System timer initialized as clocksource > [ 0.000026] sched_clock: 32 bits at 90MHz, resolution 11ns, wraps every 23860929530ns > [ 0.000665] timer@40000c00: STM32 sched_clock registered > [ 0.001275] Switching to timer-based delay loop, resolution 11ns > [ 0.001712] timer@40000c00: STM32 delay timer registered > [ 0.002253] clocksource: timer@40000c00: mask: 0xffffffff max_cycles: 0xffffffff, max_is > [ 0.003076] /soc/timer@40000c00: STM32 clockevent driver initialized (32 bits) > [ 0.014135] Console: colour dummy device 80x30 > [ 0.062375] printk: console [tty0] enabled > [ 0.063843] Calibrating delay loop (skipped), value calculated using timer frequency.. ) > [ 0.066453] pid_max: default: 4096 minimum: 301 > [ 0.071393] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) > [ 0.073734] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) > [ 0.104759] rcu: Hierarchical SRCU implementation. > [ 0.111552] devtmpfs: initialized > [ 0.339332] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:s > [ 0.341835] pinctrl core: initialized pinctrl subsystem > [ 0.658423] stm32f429-pinctrl soc:pin-controller: No package detected, use default one > [ 0.680505] stm32f429-pinctrl soc:pin-controller: GPIOA bank added > [ 0.689824] stm32f429-pinctrl soc:pin-controller: GPIOB bank added > [ 0.699409] stm32f429-pinctrl soc:pin-controller: GPIOC bank added > [ 0.708775] stm32f429-pinctrl soc:pin-controller: GPIOD bank added > [ 0.718094] stm32f429-pinctrl soc:pin-controller: GPIOE bank added > [ 0.727535] stm32f429-pinctrl soc:pin-controller: GPIOF bank added > [ 0.736953] stm32f429-pinctrl soc:pin-controller: GPIOG bank added > [ 0.746404] stm32f429-pinctrl soc:pin-controller: GPIOH bank added > [ 0.756098] stm32f429-pinctrl soc:pin-controller: GPIOI bank added > [ 0.765436] stm32f429-pinctrl soc:pin-controller: GPIOJ bank added > [ 0.774870] stm32f429-pinctrl soc:pin-controller: GPIOK bank added > [ 0.776730] stm32f429-pinctrl soc:pin-controller: Pinctrl STM32 initialized > [ 0.997446] stm32-dma 40026000.dma-controller: STM32 DMA driver registered > [ 1.029604] stm32-dma 40026400.dma-controller: STM32 DMA driver registered > [ 1.043098] clocksource: Switched to clocksource timer@40000c00 > [ 1.358086] workingset: timestamp_bits=30 max_order=11 bucket_order=0 > [ 1.632751] io scheduler mq-deadline registered > [ 1.634287] io scheduler kyber registered > [ 1.650574] STM32 USART driver initialized > [ 1.661272] 40011000.serial: ttySTM0 at MMIO 0x40011000 (irq = 34, base_baud = 5625000)t > [ 2.603317] random: fast init done > [ 2.637564] printk: console [ttySTM0] enabled > [ 2.747984] panel-ilitek-ili9341 spi0.1: get optional vcc failed > [ 2.758986] spi_stm32 40015000.spi: driver initialized > [ 2.795733] i2c /dev entries driver > [ 2.849955] stmpe-i2c 0-0041: stmpe811 detected, chip id: 0x811 > [ 2.922030] stmpe-ts stmpe-ts: DMA mask not set > [ 2.965729] input: stmpe-ts as /devices/platform/soc/40005c00.i2c/i2c-0/0-0041/stmpe-ts0 > [ 2.991570] stm32f4-i2c 40005c00.i2c: STM32F4 I2C driver registered > [ 3.058262] [drm] Initialized stm 1.0.0 20170330 for 40016800.display-controller on min0 > [ 3.665951] panel-ilitek-ili9341 spi0.1: initialized display rgb interface > [ 3.765208] Console: switching to colour frame buffer device 30x40 > [ 4.014269] stm32-display 40016800.display-controller: [drm] fb0: stmdrmfb frame buffere > [ 4.212737] Freeing unused kernel memory: 324K > [ 4.287300] This architecture does not have kernel memory protection. > [ 4.401202] Run /linuxrc as init process > [ 4.478622] with arguments: > [ 4.555069] /linuxrc > [ 4.595406] with environment: > [ 4.672213] HOME=/ > [ 4.712511] TERM=linux > [ 206.785289] random: crng init done > > > > > > If possible, you can try my suggestion. > > - tar -jxf stm32_rootfs.tar.bz2 > > - add stm32_rootfs to your kernel config( enable initramfs) > > As explained above, that's what i did > > > - make O=YOUR_KERNEL_OUT zImage dtbs LOADADDR=0x90008000 > > > > > - create itb file (combine dtb and kernel, initramfs) by mkimage > > ./mkimage -f stm32.its stm32.itb > > I didn't use .itb file, but directly uImage loaded @0x90406000 and stm32f429-disco.dtb loaded @0x90400000 It's fine with manual load dtb and uImage. > > How do you generate .its file ? I refer to u-boot doc , U-BOOT-SOURCE/doc/uImage.FIT/kernel.its you can just change the PATH('data = ' filed) of my stm32.its. you can correct bootargs in u-boot, try again good luck. Thanks Best Regards Dillon > > > > (before above command, make sure you correct stm32.its adapt to your env) > > > > This process will make u-boot to load the kernel more simple. > > > > Thanks. > > > > Best Regards. > > Dillon > > > > > >> > >> > >> I can't test your I2C patch. > >> > >> Patrice > >> > >> > >>> -- setup ts_calibrate running env on stm32f429-disco > >>> / # export TSLIB_CONFFILE=/etc/ts.conf > >>> / # export TSLIB_TSDEVICE=/dev/input/event0 > >>> / # export TSLIB_CONSOLEDEVICE=none > >>> / # export TSLIB_FBDEVICE=/dev/fb0 > >>> > >>> -- clear screen > >>> / # ./fb > >>> > >>> -- run ts_calibrate > >>> / # ts_calibrate > >>> (you can calibrate touchscreen now, and get below errors) > >>> > >>> [ 113.942087] stmpe-i2c0-0041: failed to read regs 0x52: -110 > >>> [ 114.063598] stmpe-i2c 0-0041: failed to read reg 0x4b: -16 > >>> [ 114.185629] stmpe-i2c 0-0041: failed to read reg 0x40: -16 > >>> [ 114.307257] stmpe-i2c 0-0041: failed to write reg 0xb: -16 > >>> > >>> ... > >>> with i2c patch applied, you will find below logs: > >>> > >>> RAW---------------------> 3164 908 183 118.110884 > >>> TS_READ_RAW----> x = 3164, y =908, pressure = 183 > >>> RAW---------------------> 3166 922 126 118.138946 > >>> TS_READ_RAW----> x = 3166, y = 922, pressure = 126 > >>> .... > >>> > >>> files link: > >>> https://drive.google.com/drive/folders/1qNbjChcB6UGtKzne2F5x9_WG_sZFyo3o?us… > >>> > >>> > >>> > >>> > >>> Dillon Min (4): > >>> drm/panel: Add ilitek ili9341 panel driver > >>> i2c: stm32f4: Fix stmpe811 get xyz data timeout issue > >>> clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate > >>> clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after > >>> kernel startup > >>> > >>> drivers/clk/clk-stm32f4.c | 10 +- > >>> drivers/gpu/drm/panel/Kconfig | 12 + > >>> drivers/gpu/drm/panel/Makefile | 1 + > >>> drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1285 ++++++++++++++++++++++++++ > >>> drivers/i2c/busses/i2c-stm32f4.c | 12 +- > >>> 5 files changed, 1310 insertions(+), 10 deletions(-) > >>> create mode 100755 drivers/gpu/drm/panel/panel-ilitek-ili9341.c > >>>

3 years, 6 months

Re: [Linaro-mm-sig] [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform

by Dillon Min

Hi Patrice Thanks for your time to test my patch. On Mon, May 31, 2021 at 9:20 PM Patrice CHOTARD <patrice.chotard(a)foss.st.com> wrote: > > Hi Dillon > > > > On 5/14/21 1:02 PM, dillon.minfei(a)gmail.com wrote: > > From: Dillon Min <dillon.minfei(a)gmail.com> > > > > This seriese fix three i2c/clk bug for stm32 f4/f7 > > - kernel runing in sdram, i2c driver get data timeout > > - ltdc clk turn off after kernel console active > > - kernel hang in set ltdc clock rate > > > > clk bug found on stm32f429/f469-disco board > > > > Hi Patrice: > > below is the guide to verify the patch: > > > > setup test env with following files(link at below 'files link'): > > [1] u-boot-dtb.bin > > [2] rootfs zip file (used in kernel initramfs) > > [3] u-boot's mkimage to create itb file > > [4] kernel config file > > [5] my itb with-or-without i2c patch > > > > This patch based on kernel commit: > > 88b06399c9c766c283e070b022b5ceafa4f63f19 > > > > Note: > > panel-ilitek-ili9341.c is the driver which was submitted last year, but not > > get accepted. it's used to setup touch screen calibration, then test i2c. > > > > create itb file(please correct path of 'data'): > > ./mkimage -f stm32.its stm32.itb > > > > HW setup: > > console: > > PA9, PA10 > > usart0 > > serial@40011000 > > 115200 8n1 > > > > -- flash u-boot.bin to stm32f429-disco on PC > > $ sudo openocd -f board/stm32f429discovery.cfg -c \ > > '{PATH-TO-YOUR-UBOOT}/u-boot-dtb.bin 0x08000000 exit reset' > > > > -- setup kernel load bootargs at u-boot > > U-Boot > setenv bootargs 'console=tty0 console=ttySTM0,115200 > > root=/dev/ram rdinit=/linuxrc loglevel=8 fbcon=rotate:2' > > U-Boot > loady;bootm > > (download stm32.dtb or your kernel with itb format, or download zImage, dtb) > > > > > Thanks for these informations > I was able to load and boot DTB and uImage directly in SDRAM as you suggested, > i saw Linux logo and kernel log on the STM32F429-disco display, > but i can't reach the login. > > The last kernel log i got is : > > Starting kernel ... > > [ 0.000000] Booting Linux on physical CPU 0x0 > [ 0.000000] Linux version 5.13.0-rc1-00082-g9dbbd5cb6240-dirty (nxp11987(a)lmecxl0573.lme1 > [ 0.000000] CPU: ARMv7-M [410fc241] revision 1 (ARMv7M), cr=00000000 > [ 0.000000] CPU: unknown data cache, unknown instruction cache > [ 0.000000] OF: fdt: Machine model: STMicroelectronics STM32F429i-DISCO board > [ 0.000000] Zone ranges: > [ 0.000000] Normal [mem 0x0000000090000000-0x00000000907fffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > > [...] > > [ 2.637564] printk: console [ttySTM0] enabled > [ 2.747984] panel-ilitek-ili9341 spi0.1: get optional vcc failed > [ 2.758986] spi_stm32 40015000.spi: driver initialized > [ 2.795733] i2c /dev entries driver > [ 2.849955] stmpe-i2c 0-0041: stmpe811 detected, chip id: 0x811 > [ 2.922030] stmpe-ts stmpe-ts: DMA mask not set > [ 2.965729] input: stmpe-ts as /devices/platform/soc/40005c00.i2c/i2c-0/0-0041/stmpe-ts0 > [ 2.991570] stm32f4-i2c 40005c00.i2c: STM32F4 I2C driver registered > [ 3.058262] [drm] Initialized stm 1.0.0 20170330 for 40016800.display-controller on min0 > [ 3.665951] panel-ilitek-ili9341 spi0.1: initialized display rgb interface > [ 3.765208] Console: switching to colour frame buffer device 30x40 > [ 4.014269] stm32-display 40016800.display-controller: [drm] fb0: stmdrmfb frame buffere > [ 4.212737] Freeing unused kernel memory: 324K > [ 4.287300] This architecture does not have kernel memory protection. > [ 4.401202] Run /linuxrc as init process > [ 4.478622] with arguments: > [ 4.555069] /linuxrc > [ 4.595406] with environment: > [ 4.672213] HOME=/ > [ 4.712511] TERM=linux > [ 206.785289] random: crng init done I guess you didn't add the rootfs to uImage I sent you. Could you post all the logs from u-boot startup to kernel log end. If possible, you can try my suggestion. - tar -jxf stm32_rootfs.tar.bz2 - add stm32_rootfs to your kernel config( enable initramfs) - make O=YOUR_KERNEL_OUT zImage dtbs LOADADDR=0x90008000 - create itb file (combine dtb and kernel, initramfs) by mkimage ./mkimage -f stm32.its stm32.itb (before above command, make sure you correct stm32.its adapt to your env) This process will make u-boot to load the kernel more simple. Thanks. Best Regards. Dillon > > > I can't test your I2C patch. > > Patrice > > > > -- setup ts_calibrate running env on stm32f429-disco > > / # export TSLIB_CONFFILE=/etc/ts.conf > > / # export TSLIB_TSDEVICE=/dev/input/event0 > > / # export TSLIB_CONSOLEDEVICE=none > > / # export TSLIB_FBDEVICE=/dev/fb0 > > > > -- clear screen > > / # ./fb > > > > -- run ts_calibrate > > / # ts_calibrate > > (you can calibrate touchscreen now, and get below errors) > > > > [ 113.942087] stmpe-i2c0-0041: failed to read regs 0x52: -110 > > [ 114.063598] stmpe-i2c 0-0041: failed to read reg 0x4b: -16 > > [ 114.185629] stmpe-i2c 0-0041: failed to read reg 0x40: -16 > > [ 114.307257] stmpe-i2c 0-0041: failed to write reg 0xb: -16 > > > > ... > > with i2c patch applied, you will find below logs: > > > > RAW---------------------> 3164 908 183 118.110884 > > TS_READ_RAW----> x = 3164, y =908, pressure = 183 > > RAW---------------------> 3166 922 126 118.138946 > > TS_READ_RAW----> x = 3166, y = 922, pressure = 126 > > .... > > > > files link: > > https://drive.google.com/drive/folders/1qNbjChcB6UGtKzne2F5x9_WG_sZFyo3o?us… > > > > > > > > > > Dillon Min (4): > > drm/panel: Add ilitek ili9341 panel driver > > i2c: stm32f4: Fix stmpe811 get xyz data timeout issue > > clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate > > clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after > > kernel startup > > > > drivers/clk/clk-stm32f4.c | 10 +- > > drivers/gpu/drm/panel/Kconfig | 12 + > > drivers/gpu/drm/panel/Makefile | 1 + > > drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1285 ++++++++++++++++++++++++++ > > drivers/i2c/busses/i2c-stm32f4.c | 12 +- > > 5 files changed, 1310 insertions(+), 10 deletions(-) > > create mode 100755 drivers/gpu/drm/panel/panel-ilitek-ili9341.c > >

3 years, 6 months

[RFC] Add DMA_RESV_USAGE flags

by Christian König

We had a long outstanding problem in amdgpu that buffers exported to user drivers by DMA-buf serialize all command submissions using them. In other words we can't compose the buffer with different engines and then send it to another driver for display further processing. This was added to work around the fact that i915 didn't wanted to wait for shared fences in the dma_resv objects before displaying a buffer. Since this problem is now causing issues with Vulkan we need to find a better solution for that. The patch set here tries to do this by adding an usage flag to the shared fences noting when and how they should participate in implicit synchronization. Please review and/or comment, Christian.

3 years, 6 months

[PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform

by dillon.minfei＠gmail.com

From: Dillon Min <dillon.minfei(a)gmail.com> This seriese fix three i2c/clk bug for stm32 f4/f7 - kernel runing in sdram, i2c driver get data timeout - ltdc clk turn off after kernel console active - kernel hang in set ltdc clock rate clk bug found on stm32f429/f469-disco board Hi Patrice: below is the guide to verify the patch: setup test env with following files(link at below 'files link'): [1] u-boot-dtb.bin [2] rootfs zip file (used in kernel initramfs) [3] u-boot's mkimage to create itb file [4] kernel config file [5] my itb with-or-without i2c patch This patch based on kernel commit: 88b06399c9c766c283e070b022b5ceafa4f63f19 Note: panel-ilitek-ili9341.c is the driver which was submitted last year, but not get accepted. it's used to setup touch screen calibration, then test i2c. create itb file(please correct path of 'data'): ./mkimage -f stm32.its stm32.itb HW setup: console: PA9, PA10 usart0 serial@40011000 115200 8n1 -- flash u-boot.bin to stm32f429-disco on PC $ sudo openocd -f board/stm32f429discovery.cfg -c \ '{PATH-TO-YOUR-UBOOT}/u-boot-dtb.bin 0x08000000 exit reset' -- setup kernel load bootargs at u-boot U-Boot > setenv bootargs 'console=tty0 console=ttySTM0,115200 root=/dev/ram rdinit=/linuxrc loglevel=8 fbcon=rotate:2' U-Boot > loady;bootm (download stm32.dtb or your kernel with itb format, or download zImage, dtb) -- setup ts_calibrate running env on stm32f429-disco / # export TSLIB_CONFFILE=/etc/ts.conf / # export TSLIB_TSDEVICE=/dev/input/event0 / # export TSLIB_CONSOLEDEVICE=none / # export TSLIB_FBDEVICE=/dev/fb0 -- clear screen / # ./fb -- run ts_calibrate / # ts_calibrate (you can calibrate touchscreen now, and get below errors) [ 113.942087] stmpe-i2c0-0041: failed to read regs 0x52: -110 [ 114.063598] stmpe-i2c 0-0041: failed to read reg 0x4b: -16 [ 114.185629] stmpe-i2c 0-0041: failed to read reg 0x40: -16 [ 114.307257] stmpe-i2c 0-0041: failed to write reg 0xb: -16 ... with i2c patch applied, you will find below logs: RAW---------------------> 3164 908 183 118.110884 TS_READ_RAW----> x = 3164, y =908, pressure = 183 RAW---------------------> 3166 922 126 118.138946 TS_READ_RAW----> x = 3166, y = 922, pressure = 126 .... files link: https://drive.google.com/drive/folders/1qNbjChcB6UGtKzne2F5x9_WG_sZFyo3o?us… Dillon Min (4): drm/panel: Add ilitek ili9341 panel driver i2c: stm32f4: Fix stmpe811 get xyz data timeout issue clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup drivers/clk/clk-stm32f4.c | 10 +- drivers/gpu/drm/panel/Kconfig | 12 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1285 ++++++++++++++++++++++++++ drivers/i2c/busses/i2c-stm32f4.c | 12 +- 5 files changed, 1310 insertions(+), 10 deletions(-) create mode 100755 drivers/gpu/drm/panel/panel-ilitek-ili9341.c -- 2.7.4

3 years, 7 months

[PATCH 1/4] dma-buf: Require VM_PFNMAP vma for mmap

by Daniel Vetter

tldr; DMA buffers aren't normal memory, expecting that you can use them like that (like calling get_user_pages works, or that they're accounting like any other normal memory) cannot be guaranteed. Since some userspace only runs on integrated devices, where all buffers are actually all resident system memory, there's a huge temptation to assume that a struct page is always present and useable like for any more pagecache backed mmap. This has the potential to result in a uapi nightmare. To stop this gap require that DMA buffer mmaps are VM_PFNMAP, which blocks get_user_pages and all the other struct page based infrastructure for everyone. In spirit this is the uapi counterpart to the kernel-internal CONFIG_DMABUF_DEBUG. Motivated by a recent patch which wanted to swich the system dma-buf heap to vm_insert_page instead of vm_insert_pfn. v2: Jason brought up that we also want to guarantee that all ptes have the pte_special flag set, to catch fast get_user_pages (on architectures that support this). Allowing VM_MIXEDMAP (like VM_SPECIAL does) would still allow vm_insert_page, but limiting to VM_PFNMAP will catch that. >From auditing the various functions to insert pfn pte entires (vm_insert_pfn_prot, remap_pfn_range and all it's callers like dma_mmap_wc) it looks like VM_PFNMAP is already required anyway, so this should be the correct flag to check for. References: https://lore.kernel.org/lkml/CAKMK7uHi+mG0z0HUmNt13QCCvutuRVjpcR0NjRL12k-Wb… Acked-by: Christian König <christian.koenig(a)amd.com> Cc: Jason Gunthorpe <jgg(a)ziepe.ca> Cc: Suren Baghdasaryan <surenb(a)google.com> Cc: Matthew Wilcox <willy(a)infradead.org> Cc: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter(a)intel.com> Cc: Sumit Semwal <sumit.semwal(a)linaro.org> Cc: "Christian König" <christian.koenig(a)amd.com> Cc: linux-media(a)vger.kernel.org Cc: linaro-mm-sig(a)lists.linaro.org -- Resending this so I can test the next two patches for vgem/shmem in intel-gfx-ci. Last round failed somehow, but I can't repro that at all locally here. No immediate plans to merge this patch here since ttm isn't addressed yet (and there we have the hugepte issue, for which I don't think we have a clear consensus yet). -Daniel --- drivers/dma-buf/dma-buf.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c index eadd1eaa2fb5..dda583fb1f03 100644 --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c @@ -127,6 +127,7 @@ static struct file_system_type dma_buf_fs_type = { static int dma_buf_mmap_internal(struct file *file, struct vm_area_struct *vma) { struct dma_buf *dmabuf; + int ret; if (!is_dma_buf_file(file)) return -EINVAL; @@ -142,7 +143,11 @@ static int dma_buf_mmap_internal(struct file *file, struct vm_area_struct *vma) dmabuf->size >> PAGE_SHIFT) return -EINVAL; - return dmabuf->ops->mmap(dmabuf, vma); + ret = dmabuf->ops->mmap(dmabuf, vma); + + WARN_ON(!(vma->vm_flags & VM_PFNMAP)); + + return ret; } static loff_t dma_buf_llseek(struct file *file, loff_t offset, int whence) @@ -1244,6 +1249,8 @@ EXPORT_SYMBOL_GPL(dma_buf_end_cpu_access); int dma_buf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma, unsigned long pgoff) { + int ret; + if (WARN_ON(!dmabuf || !vma)) return -EINVAL; @@ -1264,7 +1271,11 @@ int dma_buf_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma, vma_set_file(vma, dmabuf->file); vma->vm_pgoff = pgoff; - return dmabuf->ops->mmap(dmabuf, vma); + ret = dmabuf->ops->mmap(dmabuf, vma); + + WARN_ON(!(vma->vm_flags & VM_PFNMAP)); + + return ret; } EXPORT_SYMBOL_GPL(dma_buf_mmap); -- 2.31.0

3 years, 7 months

[PATCH 00/34] Rid W=1 warnings from GPU

by Lee Jones

This set is part of a larger effort attempting to clean-up W=1 kernel builds, which are currently overwhelmingly riddled with niggly little warnings. Lee Jones (34): drm/amd/pm/inc/smu_v13_0: Move table into the only source file that uses it drm/amd/pm/swsmu/smu13/aldebaran_ppt: Remove unused variable 'ret' drm/amd/pm/powerplay/hwmgr/smu7_thermal: Provide function name for 'smu7_fan_ctrl_set_default_mode()' drm/amd/pm/powerplay/hwmgr/vega12_thermal: Provide function name drm/amd/pm/powerplay/hwmgr/vega12_hwmgr: Provide 'vega12_init_smc_table()' function name drm/amd/pm/powerplay/hwmgr/vega10_hwmgr: Kernel-doc headers must contain function names drm/amd/pm/powerplay/hwmgr/vega20_hwmgr: Provide function name 'vega20_init_smc_table()' drm/amd/display/dc/bios/command_table_helper: Fix function name for 'dal_cmd_table_helper_transmitter_bp_to_atom()' drm/amd/display/dc/bios/command_table_helper2: Fix function name 'dal_cmd_table_helper_transmitter_bp_to_atom2()' drm/amd/display/dc/bios/bios_parser: Fix formatting and misnaming issues drm/nouveau/nvkm/subdev/mc/tu102: Make functions called by reference static drm/amd/display/amdgpu_dm/amdgpu_dm: Functions must directly follow their headers drm/amd/display/dc/dce/dmub_outbox: Convert over to kernel-doc drm/amd/display/dc/gpio/gpio_service: Pass around correct dce_{version,environment} types drm/amd/display/dc/dce110/dce110_hw_sequencer: Include our own header drm/amd/display/dc/dce/dce_transform: Remove superfluous re-initialisation of DCFE_MEM_LIGHT_SLEEP_CNTL, drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT,MASK} drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT,MASK drm/amd/amdgpu/amdgpu_device: Make local function static drm/amd/display/amdgpu_dm/amdgpu_dm: Fix kernel-doc formatting issue drm/amd/display/dc/dce110/dce110_hw_sequencer: Include header containing our prototypes drm/amd/display/dc/core/dc: Convert function headers to kernel-doc drm/amd/display/dmub/src/dmub_srv_stat: Convert function header to kernel-doc drm/amd/display/modules/hdcp/hdcp_psp: Remove unused function 'mod_hdcp_hdcp1_get_link_encryption_status()' drm/xlnx/zynqmp_disp: Fix incorrectly named enum 'zynqmp_disp_layer_id' drm/xlnx/zynqmp_dp: Fix incorrectly name function 'zynqmp_dp_train()' drm/ttm/ttm_tt: Demote non-conformant kernel-doc header drm/panel/panel-raspberrypi-touchscreen: Demote kernel-doc abuse drm/panel/panel-sitronix-st7701: Demote kernel-doc abuse drm/vgem/vgem_drv: Standard comment blocks should not use kernel-doc format drm/exynos/exynos7_drm_decon: Fix incorrect naming of 'decon_shadow_protect_win()' drm/exynos/exynos_drm_ipp: Fix documentation for 'exynos_drm_ipp_get_{caps,res}_ioctl()' drm/vboxvideo/hgsmi_base: Place function names into headers drm/vboxvideo/modesetting: Provide function names for prototype headers drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +- .../gpu/drm/amd/display/dc/bios/bios_parser.c | 6 +-- .../display/dc/bios/command_table_helper.c | 2 +- .../display/dc/bios/command_table_helper2.c | 2 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 46 +++++-------------- .../drm/amd/display/dc/dce/dce_mem_input.h | 2 - .../drm/amd/display/dc/dce/dce_transform.h | 3 +- .../gpu/drm/amd/display/dc/dce/dmub_outbox.c | 17 ++----- .../display/dc/dce110/dce110_hw_sequencer.c | 3 ++ .../drm/amd/display/dc/gpio/gpio_service.c | 12 ++--- .../drm/amd/display/dmub/src/dmub_srv_stat.c | 19 +++----- .../display/include/gpio_service_interface.h | 4 +- .../drm/amd/display/modules/hdcp/hdcp_psp.c | 13 ------ drivers/gpu/drm/amd/pm/inc/smu_v13_0.h | 6 --- .../drm/amd/pm/powerplay/hwmgr/smu7_thermal.c | 8 ++-- .../drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c | 26 ++++++----- .../drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c | 2 +- .../amd/pm/powerplay/hwmgr/vega12_thermal.c | 3 +- .../drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c | 2 +- .../drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 9 +++- drivers/gpu/drm/exynos/exynos7_drm_decon.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 4 +- .../gpu/drm/nouveau/nvkm/subdev/mc/tu102.c | 6 +-- .../drm/panel/panel-raspberrypi-touchscreen.c | 2 +- drivers/gpu/drm/panel/panel-sitronix-st7701.c | 2 +- drivers/gpu/drm/ttm/ttm_tt.c | 2 +- drivers/gpu/drm/vboxvideo/hgsmi_base.c | 19 +++++--- drivers/gpu/drm/vboxvideo/modesetting.c | 20 ++++---- drivers/gpu/drm/vgem/vgem_drv.c | 2 +- drivers/gpu/drm/xlnx/zynqmp_disp.c | 2 +- drivers/gpu/drm/xlnx/zynqmp_dp.c | 2 +- 32 files changed, 107 insertions(+), 147 deletions(-) Cc: Adam Jackson <ajax(a)redhat.com> Cc: Ajay Kumar <ajaykumar.rs(a)samsung.com> Cc: Akshu Agarwal <akshua(a)gmail.com> Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: Alistair Popple <apopple(a)nvidia.com> Cc: amd-gfx(a)lists.freedesktop.org Cc: Ben Skeggs <bskeggs(a)redhat.com> Cc: Ben Widawsky <ben(a)bwidawsk.net> Cc: Christian Koenig <christian.koenig(a)amd.com> Cc: "Christian König" <christian.koenig(a)amd.com> Cc: Daniel Vetter <daniel(a)ffwll.ch> Cc: David Airlie <airlied(a)linux.ie> Cc: dri-devel(a)lists.freedesktop.org Cc: Eric Anholt <eric(a)anholt.net> Cc: Evan Quan <evan.quan(a)amd.com> Cc: Hans de Goede <hdegoede(a)redhat.com> Cc: Harry Wentland <harry.wentland(a)amd.com> Cc: Huang Rui <ray.huang(a)amd.com> Cc: Hyun Kwon <hyun.kwon(a)xilinx.com> Cc: Inki Dae <inki.dae(a)samsung.com> Cc: Jagan Teki <jagan(a)amarulasolutions.com> Cc: Joonyoung Shim <jy0922.shim(a)samsung.com> Cc: Jun Lei <Jun.Lei(a)amd.com> Cc: Kevin Wang <kevin1.wang(a)amd.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski(a)canonical.com> Cc: Kyungmin Park <kyungmin.park(a)samsung.com> Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Cc: Lee Jones <lee.jones(a)linaro.org> Cc: Leo Li <sunpeng.li(a)amd.com> Cc: linaro-mm-sig(a)lists.linaro.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-media(a)vger.kernel.org Cc: linux-samsung-soc(a)vger.kernel.org Cc: Marek Szyprowski <m.szyprowski(a)samsung.com> Cc: Mauro Rossi <issor.oruam(a)gmail.com> Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram(a)amd.com> Cc: Michal Simek <michal.simek(a)xilinx.com> Cc: nouveau(a)lists.freedesktop.org Cc: Philipp Zabel <p.zabel(a)pengutronix.de> Cc: Rodrigo Siqueira <Rodrigo.Siqueira(a)amd.com> Cc: Sam Ravnborg <sam(a)ravnborg.org> Cc: Seung-Woo Kim <sw0312.kim(a)samsung.com> Cc: Sumit Semwal <sumit.semwal(a)linaro.org> Cc: Thierry Reding <thierry.reding(a)gmail.com> -- 2.31.1

3 years, 7 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig May 2021