Linaro-mm-sig March 2013

linaro-mm-sig@lists.linaro.org

19 participants
13 discussions

[PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls

by Marek Szyprowski

dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag, regardless the flags provided by the caller. This causes excessive pruning of emergency memory pools without any good reason. This patch changes the code to correctly use gfp flags provided by the dmapool caller. This should solve the dmapool usage on ARM architecture, where GFP_ATOMIC DMA allocations can be served only from the special, very limited memory pool. Reported-by: Soren Moch <smoch(a)web.de> Reported-by: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> --- mm/dmapool.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) diff --git a/mm/dmapool.c b/mm/dmapool.c index c5ab33b..86de9b2 100644 --- a/mm/dmapool.c +++ b/mm/dmapool.c @@ -62,8 +62,6 @@ struct dma_page { /* cacheable header for 'allocation' bytes */ unsigned int offset; }; -#define POOL_TIMEOUT_JIFFIES ((100 /* msec */ * HZ) / 1000) - static DEFINE_MUTEX(pools_lock); static ssize_t @@ -227,7 +225,6 @@ static struct dma_page *pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags) memset(page->vaddr, POOL_POISON_FREED, pool->allocation); #endif pool_initialise_page(pool, page); - list_add(&page->page_list, &pool->page_list); page->in_use = 0; page->offset = 0; } else { @@ -315,30 +312,21 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags, might_sleep_if(mem_flags & __GFP_WAIT); spin_lock_irqsave(&pool->lock, flags); - restart: list_for_each_entry(page, &pool->page_list, page_list) { if (page->offset < pool->allocation) goto ready; } - page = pool_alloc_page(pool, GFP_ATOMIC); - if (!page) { - if (mem_flags & __GFP_WAIT) { - DECLARE_WAITQUEUE(wait, current); - __set_current_state(TASK_UNINTERRUPTIBLE); - __add_wait_queue(&pool->waitq, &wait); - spin_unlock_irqrestore(&pool->lock, flags); + /* pool_alloc_page() might sleep, so temporarily drop &pool->lock */ + spin_unlock_irqrestore(&pool->lock, flags); - schedule_timeout(POOL_TIMEOUT_JIFFIES); + page = pool_alloc_page(pool, mem_flags); + if (!page) + return NULL; - spin_lock_irqsave(&pool->lock, flags); - __remove_wait_queue(&pool->waitq, &wait); - goto restart; - } - retval = NULL; - goto done; - } + spin_lock_irqsave(&pool->lock, flags); + list_add(&page->page_list, &pool->page_list); ready: page->in_use++; offset = page->offset; @@ -348,7 +336,6 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags, #ifdef DMAPOOL_DEBUG memset(retval, POOL_POISON_ALLOCATED, pool->size); #endif - done: spin_unlock_irqrestore(&pool->lock, flags); return retval; } -- 1.7.9.5

11 years, 7 months

[RFC/PATCH 0/5] Contiguous Memory Allocator and get_user_pages()

by Marek Szyprowski

Hello, Contiguous Memory Allocator is very sensitive about migration failures of the individual pages. A single page, which causes permanent migration failure can break large conitguous allocations and cause the failure of a multimedia device driver. One of the known issues with migration of CMA pages are the problems of migrating the anonymous user pages, for which the others called get_user_pages(). This takes a reference to the given user pages to let kernel to operate directly on the page content. This is usually used for preventing swaping out the page contents and doing direct DMA to/from userspace. To solving this issue requires preventing locking of the pages, which are placed in CMA regions, for a long time. Our idea is to migrate anonymous page content before locking the page in get_user_pages(). This cannot be done automatically, as get_user_pages() interface is used very often for various operations, which usually last for a short period of time (like for example exec syscall). We have added a new flag indicating that the given get_user_space() call will grab pages for a long time, thus it is suitable to use the migration workaround in such cases. The proposed extensions is used by V4L2/VideoBuf2 (drivers/media/v4l2-core/videobuf2-dma-contig.c), but that is not the only place which might benefit from it, like any driver which use DMA to userspace with get_user_pages(). This one is provided to demonstrate the use case. I would like to hear some comments on the presented approach. What do you think about it? Is there a chance to get such workaround merged at some point to mainline? Best regards Marek Szyprowski Samsung Poland R&D Center Patch summary: Marek Szyprowski (5): mm: introduce migrate_replace_page() for migrating page to the given target mm: get_user_pages: use static inline mm: get_user_pages: use NON-MOVABLE pages when FOLL_DURABLE flag is set mm: get_user_pages: migrate out CMA pages when FOLL_DURABLE flag is set media: vb2: use FOLL_DURABLE and __get_user_pages() to avoid CMA migration issues drivers/media/v4l2-core/videobuf2-dma-contig.c | 8 +- include/linux/highmem.h | 12 ++- include/linux/migrate.h | 5 + include/linux/mm.h | 76 ++++++++++++- mm/internal.h | 12 +++ mm/memory.c | 136 +++++++++++------------- mm/migrate.c | 59 ++++++++++ 7 files changed, 225 insertions(+), 83 deletions(-) -- 1.7.9.5

11 years, 7 months

[PATCH v2 1/3] arch: make __mutex_fastpath_lock_retval return whether fastpath succeeded or not.

by Maarten Lankhorst

This will allow me to call functions that have multiple arguments if fastpath fails. This is required to support ticket mutexes, because they need to be able to pass an extra argument to the fail function. Originally I duplicated the functions, by adding __mutex_fastpath_lock_retval_arg. This ended up being just a duplication of the existing function, so a way to test if fastpath was called ended up being better. This also cleaned up the reservation mutex patch some by being able to call an atomic_set instead of atomic_xchg, and making it easier to detect if the wrong unlock function was previously used. Signed-off-by: Maarten Lankhorst <maarten.lankhorst(a)canonical.com> --- arch/ia64/include/asm/mutex.h | 10 ++++------ arch/powerpc/include/asm/mutex.h | 10 ++++------ arch/sh/include/asm/mutex-llsc.h | 4 ++-- arch/x86/include/asm/mutex_32.h | 11 ++++------- arch/x86/include/asm/mutex_64.h | 11 ++++------- include/asm-generic/mutex-dec.h | 10 ++++------ include/asm-generic/mutex-null.h | 2 +- include/asm-generic/mutex-xchg.h | 10 ++++------ kernel/mutex.c | 32 ++++++++++++++------------------ 9 files changed, 41 insertions(+), 59 deletions(-) diff --git a/arch/ia64/include/asm/mutex.h b/arch/ia64/include/asm/mutex.h index bed73a6..f41e66d 100644 --- a/arch/ia64/include/asm/mutex.h +++ b/arch/ia64/include/asm/mutex.h @@ -29,17 +29,15 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns. + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(ia64_fetchadd4_acq(count, -1) != 1)) - return fail_fn(count); + return -1; return 0; } diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h index 5399f7e..127ab23 100644 --- a/arch/powerpc/include/asm/mutex.h +++ b/arch/powerpc/include/asm/mutex.h @@ -82,17 +82,15 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns. + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(__mutex_dec_return_lock(count) < 0)) - return fail_fn(count); + return -1; return 0; } diff --git a/arch/sh/include/asm/mutex-llsc.h b/arch/sh/include/asm/mutex-llsc.h index 090358a..dad29b6 100644 --- a/arch/sh/include/asm/mutex-llsc.h +++ b/arch/sh/include/asm/mutex-llsc.h @@ -37,7 +37,7 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) } static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { int __done, __res; @@ -51,7 +51,7 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) : "t"); if (unlikely(!__done || __res != 0)) - __res = fail_fn(count); + __res = -1; return __res; } diff --git a/arch/x86/include/asm/mutex_32.h b/arch/x86/include/asm/mutex_32.h index 03f90c8..b7f6b34 100644 --- a/arch/x86/include/asm/mutex_32.h +++ b/arch/x86/include/asm/mutex_32.h @@ -42,17 +42,14 @@ do { \ * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if it - * wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or 1 otherwise. */ -static inline int __mutex_fastpath_lock_retval(atomic_t *count, - int (*fail_fn)(atomic_t *)) +static inline int __mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(atomic_dec_return(count) < 0)) - return fail_fn(count); + return -1; else return 0; } diff --git a/arch/x86/include/asm/mutex_64.h b/arch/x86/include/asm/mutex_64.h index 68a87b0..2c543ff 100644 --- a/arch/x86/include/asm/mutex_64.h +++ b/arch/x86/include/asm/mutex_64.h @@ -37,17 +37,14 @@ do { \ * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ -static inline int __mutex_fastpath_lock_retval(atomic_t *count, - int (*fail_fn)(atomic_t *)) +static inline int __mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(atomic_dec_return(count) < 0)) - return fail_fn(count); + return -1; else return 0; } diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h index f104af7..d4f9fb4 100644 --- a/include/asm-generic/mutex-dec.h +++ b/include/asm-generic/mutex-dec.h @@ -28,17 +28,15 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if - * it wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns. + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(atomic_dec_return(count) < 0)) - return fail_fn(count); + return -1; return 0; } diff --git a/include/asm-generic/mutex-null.h b/include/asm-generic/mutex-null.h index e1bbbc7..efd6206 100644 --- a/include/asm-generic/mutex-null.h +++ b/include/asm-generic/mutex-null.h @@ -11,7 +11,7 @@ #define _ASM_GENERIC_MUTEX_NULL_H #define __mutex_fastpath_lock(count, fail_fn) fail_fn(count) -#define __mutex_fastpath_lock_retval(count, fail_fn) fail_fn(count) +#define __mutex_fastpath_lock_retval(count, fail_fn) (-1) #define __mutex_fastpath_unlock(count, fail_fn) fail_fn(count) #define __mutex_fastpath_trylock(count, fail_fn) fail_fn(count) #define __mutex_slowpath_needs_to_unlock() 1 diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h index c04e0db..f169ec0 100644 --- a/include/asm-generic/mutex-xchg.h +++ b/include/asm-generic/mutex-xchg.h @@ -39,18 +39,16 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) * __mutex_fastpath_lock_retval - try to take the lock by moving the count * from 1 to a 0 value * @count: pointer of type atomic_t - * @fail_fn: function to call if the original value was not 1 * - * Change the count from 1 to a value lower than 1, and call <fail_fn> if it - * wasn't 1 originally. This function returns 0 if the fastpath succeeds, - * or anything the slow path function returns + * Change the count from 1 to a value lower than 1. This function returns 0 + * if the fastpath succeeds, or -1 otherwise. */ static inline int -__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) +__mutex_fastpath_lock_retval(atomic_t *count) { if (unlikely(atomic_xchg(count, 0) != 1)) if (likely(atomic_xchg(count, -1) != 1)) - return fail_fn(count); + return -1; return 0; } diff --git a/kernel/mutex.c b/kernel/mutex.c index 52f2301..84a5f07 100644 --- a/kernel/mutex.c +++ b/kernel/mutex.c @@ -351,10 +351,10 @@ __mutex_unlock_slowpath(atomic_t *lock_count) * mutex_lock_interruptible() and mutex_trylock(). */ static noinline int __sched -__mutex_lock_killable_slowpath(atomic_t *lock_count); +__mutex_lock_killable_slowpath(struct mutex *lock); static noinline int __sched -__mutex_lock_interruptible_slowpath(atomic_t *lock_count); +__mutex_lock_interruptible_slowpath(struct mutex *lock); /** * mutex_lock_interruptible - acquire the mutex, interruptible @@ -372,12 +372,12 @@ int __sched mutex_lock_interruptible(struct mutex *lock) int ret; might_sleep(); - ret = __mutex_fastpath_lock_retval - (&lock->count, __mutex_lock_interruptible_slowpath); - if (!ret) + ret = __mutex_fastpath_lock_retval(&lock->count); + if (likely(!ret)) { mutex_set_owner(lock); - - return ret; + return 0; + } else + return __mutex_lock_interruptible_slowpath(lock); } EXPORT_SYMBOL(mutex_lock_interruptible); @@ -387,12 +387,12 @@ int __sched mutex_lock_killable(struct mutex *lock) int ret; might_sleep(); - ret = __mutex_fastpath_lock_retval - (&lock->count, __mutex_lock_killable_slowpath); - if (!ret) + ret = __mutex_fastpath_lock_retval(&lock->count); + if (likely(!ret)) { mutex_set_owner(lock); - - return ret; + return 0; + } else + return __mutex_lock_killable_slowpath(lock); } EXPORT_SYMBOL(mutex_lock_killable); @@ -405,18 +405,14 @@ __mutex_lock_slowpath(atomic_t *lock_count) } static noinline int __sched -__mutex_lock_killable_slowpath(atomic_t *lock_count) +__mutex_lock_killable_slowpath(struct mutex *lock) { - struct mutex *lock = container_of(lock_count, struct mutex, count); - return __mutex_lock_common(lock, TASK_KILLABLE, 0, NULL, _RET_IP_); } static noinline int __sched -__mutex_lock_interruptible_slowpath(atomic_t *lock_count) +__mutex_lock_interruptible_slowpath(struct mutex *lock) { - struct mutex *lock = container_of(lock_count, struct mutex, count); - return __mutex_lock_common(lock, TASK_INTERRUPTIBLE, 0, NULL, _RET_IP_); } #endif

11 years, 8 months

[PATCH v2 0/2] dma-buf: Add support for debugfs

by Sumit Semwal

The patch series adds a much-missed support for debugfs to dma-buf framework. Based on the feedback received on v1 of this patch series, support is also added to allow exporters to provide name-strings that will prove useful while debugging. Some more magic can be added for more advanced debugging, but we'll leave that for the time being. Best regards, ~Sumit. Sumit Semwal (2): dma-buf: replace dma_buf_export() with dma_buf_export_named() dma-buf: Add debugfs support Documentation/dma-buf-sharing.txt | 13 ++- drivers/base/dma-buf.c | 173 ++++++++++++++++++++++++++++++++++++- include/linux/dma-buf.h | 16 +++- 3 files changed, 193 insertions(+), 9 deletions(-) -- 1.7.10.4

11 years, 9 months

[PATCH v10 0/2] Add CMA heap for ION memory manager

by Benjamin Gaignard

The goal of those patches is to allow ION clients (drivers or userland applications) to use Contiguous Memory Allocator (CMA). To get more info about CMA: http://lists.linaro.org/pipermail/linaro-mm-sig/2012-February/001328.html patches version 10: - stop adding private field in ion_heap structure - put ion_heap into struct ion_cma_heap patches version 9: - rebased on Android kernel - make cma heap able to support ION_FLAG_CACHED flag patches version 8: - fix memory leak when release sg_table - remove virt_to_phys from ion_cma_phys patches version 7: - rebased on Android kernel - fix ion Makefile - add ion_cma_map_kernel function - remove CONFIG_CMA compilation flags from ion_heap.c patches version 6: - add private field in ion_platform_heap to pass the device linked with CMA. - rework CMA heap to use private field. - prepare CMA heap for incoming dma_common_get_sgtable function http://lists.linaro.org/pipermail/linaro-mm-sig/2012-June/002109.html - simplify ion-ux500 driver. patches version 5: - port patches on android kernel 3.4 where ION use dmabuf - add ion_cma_heap_map_dma and ion_cma_heap_unmap_dma functions patches version 4: - add ION_HEAP_TYPE_DMA heap type in ion_heap_type enum. - CMA heap is now a "native" ION heap. - add ion_heap_create_full function to keep backward compatibilty. - clean up included files in CMA heap - ux500-ion is using ion_heap_create_full instead of ion_heap_create patches version 3: - add a private field in ion_heap structure instead of expose ion_device structure to all heaps - ion_cma_heap is no more a platform driver - ion_cma_heap use ion_heap private field to store the device pointer and make the link with reserved CMA regions - provide ux500-ion driver and configuration file for snowball board to give an example of how use CMA heaps patches version 2: - fix comments done by Andy Green Benjamin Gaignard (2): gpu: ion: fix ion_platform_data definition gpu: ion: add CMA heap drivers/gpu/ion/Makefile | 1 + drivers/gpu/ion/ion_cma_heap.c | 234 ++++++++++++++++++++++++++++++++++++++++ drivers/gpu/ion/ion_heap.c | 6 ++ drivers/gpu/ion/ion_priv.h | 14 +++ include/linux/ion.h | 5 +- 5 files changed, 259 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/ion/ion_cma_heap.c -- 1.7.10

11 years, 9 months

[PATCH v9 0/3] Add CMA heap for ION memory manager

by Benjamin Gaignard

The goal of those patches is to allow ION clients (drivers or userland applications) to use Contiguous Memory Allocator (CMA). To get more info about CMA: http://lists.linaro.org/pipermail/linaro-mm-sig/2012-February/001328.html patches version 9: - rebased on Android kernel - make cma heap able to support ION_FLAG_CACHED flag patches version 8: - fix memory leak when release sg_table - remove virt_to_phys from ion_cma_phys patches version 7: - rebased on Android kernel - fix ion Makefile - add ion_cma_map_kernel function - remove CONFIG_CMA compilation flags from ion_heap.c patches version 6: - add private field in ion_platform_heap to pass the device linked with CMA. - rework CMA heap to use private field. - prepare CMA heap for incoming dma_common_get_sgtable function http://lists.linaro.org/pipermail/linaro-mm-sig/2012-June/002109.html - simplify ion-ux500 driver. patches version 5: - port patches on android kernel 3.4 where ION use dmabuf - add ion_cma_heap_map_dma and ion_cma_heap_unmap_dma functions patches version 4: - add ION_HEAP_TYPE_DMA heap type in ion_heap_type enum. - CMA heap is now a "native" ION heap. - add ion_heap_create_full function to keep backward compatibilty. - clean up included files in CMA heap - ux500-ion is using ion_heap_create_full instead of ion_heap_create patches version 3: - add a private field in ion_heap structure instead of expose ion_device structure to all heaps - ion_cma_heap is no more a platform driver - ion_cma_heap use ion_heap private field to store the device pointer and make the link with reserved CMA regions - provide ux500-ion driver and configuration file for snowball board to give an example of how use CMA heaps patches version 2: - fix comments done by Andy Green Benjamin Gaignard (3): gpu: ion: fix ion_platform_data definition gpu: ion: add private field in ion_heap and ion_platform_heap structure gpu: ion: add CMA heap drivers/gpu/ion/Makefile | 1 + drivers/gpu/ion/ion_cma_heap.c | 221 ++++++++++++++++++++++++++++++++++++++++ drivers/gpu/ion/ion_heap.c | 7 ++ drivers/gpu/ion/ion_priv.h | 16 +++ include/linux/ion.h | 5 +- 5 files changed, 249 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/ion/ion_cma_heap.c -- 1.7.10

11 years, 9 months

[PATCH 0/2] Device Tree support for CMA (Contiguous Memory Allocator)

by Marek Szyprowski

Hello, Here is my initial proposal for device tree integration for Contiguous Memory Allocator. The code is quite straightforward, however I expect that the memory bindings require some discussion. The proposed bindings allows to define contiguous memory regions of specified base address and size. Then, the defined regions can be assigned to the given device(s) by adding a property with a phanle to the defined contiguous memory region. From the device tree perspective that's all. Once the bindings are added, all the memory allocations from dma-mapping subsystem will be served from the defined contiguous memory regions. Contiguous Memory Allocator is a framework, which lets to provide a large contiguous memory buffers for (usually a multimedia) devices. The contiguous memory is reserved during early boot and then shared with kernel, which is allowed to allocate it for movable pages. Then, when device driver requests a contigouous buffer, the framework migrates movable pages out of contiguous region and gives it to the driver. When device driver frees the buffer, it is added to kernel memory pool again. For more information, please refer to commit c64be2bb1c6eb43c838b2c6d57 ("drivers: add Contiguous Memory Allocator") and d484864dd96e1830e76895 (CMA merge commit). Best regards Marek Szyprowski Samsung Poland R&D Center Patch summary: Marek Szyprowski (2): drivers: dma-contiguous: clean source code and prepare for device tree drivers: dma-contiguous: add initialization from device tree Documentation/devicetree/bindings/memory.txt | 101 ++++++++++ arch/arm/boot/dts/skeleton.dtsi | 7 +- drivers/base/dma-contiguous.c | 278 +++++++++++++++++++------- include/asm-generic/dma-contiguous.h | 4 +- include/linux/dma-contiguous.h | 32 ++- 5 files changed, 338 insertions(+), 84 deletions(-) create mode 100644 Documentation/devicetree/bindings/memory.txt -- 1.7.9.5

11 years, 9 months

lists.linaro.org maintenance completed

by IT Services

This is to let you know that the migration of lists.linaro.org has been successfully completed. As per the email I sent on Wednesday, it may take some time for the new address of the server to be seen by your computer. You can check this by trying to connect to the web site: http://lists.linaro.org/ If you are able to connect and you do not get an error, this means you are connecting to the new server and you can send email to the lists. If you experience any problems after the weekend and you find that you still cannot connect to the server, please reply to this email to let us know. Regards Philip IT Services Manager Linaro

11 years, 9 months

Planned maintenance - lists.linaro.org

by IT Services

Hello You are receiving this email because you are subscribed to one or more mailing lists provided by the lists.linaro.org server. IT Services are announcing planned maintenance for this server scheduled for *Friday 15th March 2013, starting at 2pm GMT*. The purpose of the work is to move the service to another server. There will be some disruption during this maintenance. In order to ensure that you do not accidentally try to use the service while it is being moved, the current server will be shut down at 2pm. A further email will be sent on Friday afternoon to confirm that the migration of the service is completed. However, due to the way servers are found, it may take a while before your computer is able to connect to the relocated service. After the old server has been shut down, email sent to any of the lists will be queued, but it is possible that the sending server will still trying to deliver the email to the old server rather than the new one when it is started. It is therefore *strongly* recommended that you do not send any email to an @lists.linaro.org email address until you can connect to the new service, which you will be able to test by trying to use a web browser to connect to http://lists.linaro.org after you receive the email confirming that the migration has been completed. Since the old service will be shut down, if you are able to connect, you can be sure you have connected to the new service. If by Monday you are still unable to connect to the service or you are not able to send email to an @lists.linaro.org email address, please send an email to its(a)linaro.org. Thank you. Regards Philip IT Services Manager Linaro

11 years, 9 months

[PATCH] ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation

by Marek Szyprowski

Atomic pool should always be allocated from DMA zone if such zone is available in the system to avoid issues caused by limited dma mask of any of the devices used for making an atomic allocation. Reported-by: Krzysztof Halasa <khc(a)pm.waw.pl> Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> --- arch/arm/mm/dma-mapping.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c7e3759..e9db6b4 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -342,6 +342,7 @@ static int __init atomic_pool_init(void) { struct dma_pool *pool = &atomic_pool; pgprot_t prot = pgprot_dmacoherent(pgprot_kernel); + gfp_t gfp = GFP_KERNEL | GFP_DMA; unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; @@ -361,8 +362,8 @@ static int __init atomic_pool_init(void) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else - ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, - &page, atomic_pool_init); + ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page, + atomic_pool_init); if (ptr) { int i; -- 1.7.9.5

11 years, 9 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-mm-sig March 2013