linaro-kernel

linaro-kernel@lists.linaro.org

10095 discussions

[PATCH v2 0/7] Add DT nodes for FIMD and DP controller for Exynos5420 SoC

by Vikas Sajjan

This patchset adds DT nodes for FIMD and DP controller for Exynos5420 based SMDK. It moves all common properties of FIMD and DP controller DT node specific to Exynos5 Socs like 5250 and 5420 to exynos5.dtsi file. It also adds required PM domain DT nodes for exynos5420. Is rebased on branch kgene's "for-next" https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/log/?h… The DP PHY DT Node is based on Jingoo Han's inflight patchset at http://comments.gmane.org/gmane.linux.drivers.video-input-infrastructure/66… changes since v1: - Addressed comments given by Tomasz Figa <tomasz.figa(a)gmail.com> and Ajay kumar <ajaynumb(a)gmail.com> Vikas Sajjan (6): ARM: dts: Move display-timimg information inside FIMD DT node for exynos5250 ARM: dts: Update FIMD DT node for Exynos5 SoCs ARM: dts: Add FIMD DT node to exynos5420 DTS files ARM: dts: Update DP controller DT Node for Exynos5 based SoCs ARM: dts: Add DP controller DT node to exynos5420 SoC ARM: dts: Add pin state information for DP HPD support to Exynos5420 Yadwinder Singh Brar (1): ARM: dts: Add basic PM domains for EXYNOS5420 arch/arm/boot/dts/exynos5.dtsi | 21 +++++++++++ arch/arm/boot/dts/exynos5250-arndale.dts | 4 ++- arch/arm/boot/dts/exynos5250-smdk5250.dts | 32 +++++++++-------- arch/arm/boot/dts/exynos5250.dtsi | 28 ++++++--------- arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 ++++ arch/arm/boot/dts/exynos5420-smdk5420.dts | 31 ++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi | 55 +++++++++++++++++++++++++++++ 7 files changed, 145 insertions(+), 33 deletions(-) -- 1.7.9.5

12 years

[PATCH] regulator: core: Split devres code out into a separate file

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Cut down on the size of core.c a bit more and ensure that the devres versions of things don't do too much peering inside the internals of the APIs they wrap. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/regulator/Makefile | 2 +- drivers/regulator/core.c | 252 +------------------------------------------ drivers/regulator/devres.c | 252 +++++++++++++++++++++++++++++++++++++++++++ drivers/regulator/internal.h | 38 +++++++ 4 files changed, 292 insertions(+), 252 deletions(-) create mode 100644 drivers/regulator/devres.c create mode 100644 drivers/regulator/internal.h diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 185cce2..69db4c8 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -3,7 +3,7 @@ # -obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o helpers.o +obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o helpers.o devres.o obj-$(CONFIG_OF) += of_regulator.o obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 02d2ccc..02af90e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -36,6 +36,7 @@ #include <trace/events/regulator.h> #include "dummy.h" +#include "internal.h" #define rdev_crit(rdev, fmt, ...) \ pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) @@ -82,25 +83,6 @@ struct regulator_enable_gpio { unsigned int ena_gpio_invert:1; }; -/* - * struct regulator - * - * One for each consumer device. - */ -struct regulator { - struct device *dev; - struct list_head list; - unsigned int always_on:1; - unsigned int bypass:1; - int uA_load; - int min_uV; - int max_uV; - char *supply_name; - struct device_attribute dev_attr; - struct regulator_dev *rdev; - struct dentry *debugfs; -}; - static int _regulator_is_enabled(struct regulator_dev *rdev); static int _regulator_disable(struct regulator_dev *rdev); static int _regulator_get_voltage(struct regulator_dev *rdev); @@ -1334,50 +1316,6 @@ out: return regulator; } -enum { - NORMAL_GET, - EXCLUSIVE_GET, - OPTIONAL_GET, -}; - -static void devm_regulator_release(struct device *dev, void *res) -{ - regulator_put(*(struct regulator **)res); -} - -static struct regulator *_devm_regulator_get(struct device *dev, const char *id, - int get_type) -{ - struct regulator **ptr, *regulator; - - ptr = devres_alloc(devm_regulator_release, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return ERR_PTR(-ENOMEM); - - switch (get_type) { - case NORMAL_GET: - regulator = regulator_get(dev, id); - break; - case EXCLUSIVE_GET: - regulator = regulator_get_exclusive(dev, id); - break; - case OPTIONAL_GET: - regulator = regulator_get_optional(dev, id); - break; - default: - regulator = ERR_PTR(-EINVAL); - } - - if (!IS_ERR(regulator)) { - *ptr = regulator; - devres_add(dev, ptr); - } else { - devres_free(ptr); - } - - return regulator; -} - /** * regulator_get - lookup and obtain a reference to a regulator. * @dev: device for regulator "consumer" @@ -1398,21 +1336,6 @@ struct regulator *regulator_get(struct device *dev, const char *id) EXPORT_SYMBOL_GPL(regulator_get); /** - * devm_regulator_get - Resource managed regulator_get() - * @dev: device for regulator "consumer" - * @id: Supply name or regulator ID. - * - * Managed regulator_get(). Regulators returned from this function are - * automatically regulator_put() on driver detach. See regulator_get() for more - * information. - */ -struct regulator *devm_regulator_get(struct device *dev, const char *id) -{ - return _devm_regulator_get(dev, id, NORMAL_GET); -} -EXPORT_SYMBOL_GPL(devm_regulator_get); - -/** * regulator_get_exclusive - obtain exclusive access to a regulator. * @dev: device for regulator "consumer" * @id: Supply name or regulator ID. @@ -1440,22 +1363,6 @@ struct regulator *regulator_get_exclusive(struct device *dev, const char *id) EXPORT_SYMBOL_GPL(regulator_get_exclusive); /** - * devm_regulator_get_exclusive - Resource managed regulator_get_exclusive() - * @dev: device for regulator "consumer" - * @id: Supply name or regulator ID. - * - * Managed regulator_get_exclusive(). Regulators returned from this function - * are automatically regulator_put() on driver detach. See regulator_get() for - * more information. - */ -struct regulator *devm_regulator_get_exclusive(struct device *dev, - const char *id) -{ - return _devm_regulator_get(dev, id, EXCLUSIVE_GET); -} -EXPORT_SYMBOL_GPL(devm_regulator_get_exclusive); - -/** * regulator_get_optional - obtain optional access to a regulator. * @dev: device for regulator "consumer" * @id: Supply name or regulator ID. @@ -1484,22 +1391,6 @@ struct regulator *regulator_get_optional(struct device *dev, const char *id) } EXPORT_SYMBOL_GPL(regulator_get_optional); -/** - * devm_regulator_get_optional - Resource managed regulator_get_optional() - * @dev: device for regulator "consumer" - * @id: Supply name or regulator ID. - * - * Managed regulator_get_optional(). Regulators returned from this - * function are automatically regulator_put() on driver detach. See - * regulator_get_optional() for more information. - */ -struct regulator *devm_regulator_get_optional(struct device *dev, - const char *id) -{ - return _devm_regulator_get(dev, id, OPTIONAL_GET); -} -EXPORT_SYMBOL_GPL(devm_regulator_get_optional); - /* Locks held by regulator_put() */ static void _regulator_put(struct regulator *regulator) { @@ -1541,35 +1432,6 @@ void regulator_put(struct regulator *regulator) } EXPORT_SYMBOL_GPL(regulator_put); -static int devm_regulator_match(struct device *dev, void *res, void *data) -{ - struct regulator **r = res; - if (!r || !*r) { - WARN_ON(!r || !*r); - return 0; - } - return *r == data; -} - -/** - * devm_regulator_put - Resource managed regulator_put() - * @regulator: regulator to free - * - * Deallocate a regulator allocated with devm_regulator_get(). Normally - * this function will not need to be called and the resource management - * code will ensure that the resource is freed. - */ -void devm_regulator_put(struct regulator *regulator) -{ - int rc; - - rc = devres_release(regulator->dev, devm_regulator_release, - devm_regulator_match, regulator); - if (rc != 0) - WARN_ON(rc); -} -EXPORT_SYMBOL_GPL(devm_regulator_put); - /* Manage enable GPIO list. Same GPIO pin can be shared among regulators */ static int regulator_ena_gpio_request(struct regulator_dev *rdev, const struct regulator_config *config) @@ -2911,52 +2773,6 @@ err: } EXPORT_SYMBOL_GPL(regulator_bulk_get); -/** - * devm_regulator_bulk_get - managed get multiple regulator consumers - * - * @dev: Device to supply - * @num_consumers: Number of consumers to register - * @consumers: Configuration of consumers; clients are stored here. - * - * @return 0 on success, an errno on failure. - * - * This helper function allows drivers to get several regulator - * consumers in one operation with management, the regulators will - * automatically be freed when the device is unbound. If any of the - * regulators cannot be acquired then any regulators that were - * allocated will be freed before returning to the caller. - */ -int devm_regulator_bulk_get(struct device *dev, int num_consumers, - struct regulator_bulk_data *consumers) -{ - int i; - int ret; - - for (i = 0; i < num_consumers; i++) - consumers[i].consumer = NULL; - - for (i = 0; i < num_consumers; i++) { - consumers[i].consumer = devm_regulator_get(dev, - consumers[i].supply); - if (IS_ERR(consumers[i].consumer)) { - ret = PTR_ERR(consumers[i].consumer); - dev_err(dev, "Failed to get supply '%s': %d\n", - consumers[i].supply, ret); - consumers[i].consumer = NULL; - goto err; - } - } - - return 0; - -err: - for (i = 0; i < num_consumers && consumers[i].consumer; i++) - devm_regulator_put(consumers[i].consumer); - - return ret; -} -EXPORT_SYMBOL_GPL(devm_regulator_bulk_get); - static void regulator_bulk_enable_async(void *data, async_cookie_t cookie) { struct regulator_bulk_data *bulk = data; @@ -3492,44 +3308,6 @@ clean: } EXPORT_SYMBOL_GPL(regulator_register); -static void devm_rdev_release(struct device *dev, void *res) -{ - regulator_unregister(*(struct regulator_dev **)res); -} - -/** - * devm_regulator_register - Resource managed regulator_register() - * @regulator_desc: regulator to register - * @config: runtime configuration for regulator - * - * Called by regulator drivers to register a regulator. Returns a - * valid pointer to struct regulator_dev on success or an ERR_PTR() on - * error. The regulator will automaticall be released when the device - * is unbound. - */ -struct regulator_dev *devm_regulator_register(struct device *dev, - const struct regulator_desc *regulator_desc, - const struct regulator_config *config) -{ - struct regulator_dev **ptr, *rdev; - - ptr = devres_alloc(devm_rdev_release, sizeof(*ptr), - GFP_KERNEL); - if (!ptr) - return ERR_PTR(-ENOMEM); - - rdev = regulator_register(regulator_desc, config); - if (!IS_ERR(rdev)) { - *ptr = rdev; - devres_add(dev, ptr); - } else { - devres_free(ptr); - } - - return rdev; -} -EXPORT_SYMBOL_GPL(devm_regulator_register); - /** * regulator_unregister - unregister regulator * @rdev: regulator to unregister @@ -3559,34 +3337,6 @@ void regulator_unregister(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(regulator_unregister); -static int devm_rdev_match(struct device *dev, void *res, void *data) -{ - struct regulator_dev **r = res; - if (!r || !*r) { - WARN_ON(!r || !*r); - return 0; - } - return *r == data; -} - -/** - * devm_regulator_unregister - Resource managed regulator_unregister() - * @regulator: regulator to free - * - * Unregister a regulator registered with devm_regulator_register(). - * Normally this function will not need to be called and the resource - * management code will ensure that the resource is freed. - */ -void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev) -{ - int rc; - - rc = devres_release(dev, devm_rdev_release, devm_rdev_match, rdev); - if (rc != 0) - WARN_ON(rc); -} -EXPORT_SYMBOL_GPL(devm_regulator_unregister); - /** * regulator_suspend_prepare - prepare regulators for system wide suspend * @state: system suspend state diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c new file mode 100644 index 0000000..5891212 --- /dev/null +++ b/drivers/regulator/devres.c @@ -0,0 +1,252 @@ +/* + * devres.c -- Voltage/Current Regulator framework devres implementation. + * + * Copyright 2013 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/driver.h> +#include <linux/module.h> + +#include "internal.h" + +enum { + NORMAL_GET, + EXCLUSIVE_GET, + OPTIONAL_GET, +}; + +static void devm_regulator_release(struct device *dev, void *res) +{ + regulator_put(*(struct regulator **)res); +} + +static struct regulator *_devm_regulator_get(struct device *dev, const char *id, + int get_type) +{ + struct regulator **ptr, *regulator; + + ptr = devres_alloc(devm_regulator_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + switch (get_type) { + case NORMAL_GET: + regulator = regulator_get(dev, id); + break; + case EXCLUSIVE_GET: + regulator = regulator_get_exclusive(dev, id); + break; + case OPTIONAL_GET: + regulator = regulator_get_optional(dev, id); + break; + default: + regulator = ERR_PTR(-EINVAL); + } + + if (!IS_ERR(regulator)) { + *ptr = regulator; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return regulator; +} + +/** + * devm_regulator_get - Resource managed regulator_get() + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Managed regulator_get(). Regulators returned from this function are + * automatically regulator_put() on driver detach. See regulator_get() for more + * information. + */ +struct regulator *devm_regulator_get(struct device *dev, const char *id) +{ + return _devm_regulator_get(dev, id, NORMAL_GET); +} +EXPORT_SYMBOL_GPL(devm_regulator_get); + +/** + * devm_regulator_get_exclusive - Resource managed regulator_get_exclusive() + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Managed regulator_get_exclusive(). Regulators returned from this function + * are automatically regulator_put() on driver detach. See regulator_get() for + * more information. + */ +struct regulator *devm_regulator_get_exclusive(struct device *dev, + const char *id) +{ + return _devm_regulator_get(dev, id, EXCLUSIVE_GET); +} +EXPORT_SYMBOL_GPL(devm_regulator_get_exclusive); + +/** + * devm_regulator_get_optional - Resource managed regulator_get_optional() + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Managed regulator_get_optional(). Regulators returned from this + * function are automatically regulator_put() on driver detach. See + * regulator_get_optional() for more information. + */ +struct regulator *devm_regulator_get_optional(struct device *dev, + const char *id) +{ + return _devm_regulator_get(dev, id, OPTIONAL_GET); +} +EXPORT_SYMBOL_GPL(devm_regulator_get_optional); + +static int devm_regulator_match(struct device *dev, void *res, void *data) +{ + struct regulator **r = res; + if (!r || !*r) { + WARN_ON(!r || !*r); + return 0; + } + return *r == data; +} + +/** + * devm_regulator_put - Resource managed regulator_put() + * @regulator: regulator to free + * + * Deallocate a regulator allocated with devm_regulator_get(). Normally + * this function will not need to be called and the resource management + * code will ensure that the resource is freed. + */ +void devm_regulator_put(struct regulator *regulator) +{ + int rc; + + rc = devres_release(regulator->dev, devm_regulator_release, + devm_regulator_match, regulator); + if (rc != 0) + WARN_ON(rc); +} +EXPORT_SYMBOL_GPL(devm_regulator_put); + +/** + * devm_regulator_bulk_get - managed get multiple regulator consumers + * + * @dev: Device to supply + * @num_consumers: Number of consumers to register + * @consumers: Configuration of consumers; clients are stored here. + * + * @return 0 on success, an errno on failure. + * + * This helper function allows drivers to get several regulator + * consumers in one operation with management, the regulators will + * automatically be freed when the device is unbound. If any of the + * regulators cannot be acquired then any regulators that were + * allocated will be freed before returning to the caller. + */ +int devm_regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret; + + for (i = 0; i < num_consumers; i++) + consumers[i].consumer = NULL; + + for (i = 0; i < num_consumers; i++) { + consumers[i].consumer = devm_regulator_get(dev, + consumers[i].supply); + if (IS_ERR(consumers[i].consumer)) { + ret = PTR_ERR(consumers[i].consumer); + dev_err(dev, "Failed to get supply '%s': %d\n", + consumers[i].supply, ret); + consumers[i].consumer = NULL; + goto err; + } + } + + return 0; + +err: + for (i = 0; i < num_consumers && consumers[i].consumer; i++) + devm_regulator_put(consumers[i].consumer); + + return ret; +} +EXPORT_SYMBOL_GPL(devm_regulator_bulk_get); + +static void devm_rdev_release(struct device *dev, void *res) +{ + regulator_unregister(*(struct regulator_dev **)res); +} + +/** + * devm_regulator_register - Resource managed regulator_register() + * @regulator_desc: regulator to register + * @config: runtime configuration for regulator + * + * Called by regulator drivers to register a regulator. Returns a + * valid pointer to struct regulator_dev on success or an ERR_PTR() on + * error. The regulator will automaticall be released when the device + * is unbound. + */ +struct regulator_dev *devm_regulator_register(struct device *dev, + const struct regulator_desc *regulator_desc, + const struct regulator_config *config) +{ + struct regulator_dev **ptr, *rdev; + + ptr = devres_alloc(devm_rdev_release, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + rdev = regulator_register(regulator_desc, config); + if (!IS_ERR(rdev)) { + *ptr = rdev; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return rdev; +} +EXPORT_SYMBOL_GPL(devm_regulator_register); + +static int devm_rdev_match(struct device *dev, void *res, void *data) +{ + struct regulator_dev **r = res; + if (!r || !*r) { + WARN_ON(!r || !*r); + return 0; + } + return *r == data; +} + +/** + * devm_regulator_unregister - Resource managed regulator_unregister() + * @regulator: regulator to free + * + * Unregister a regulator registered with devm_regulator_register(). + * Normally this function will not need to be called and the resource + * management code will ensure that the resource is freed. + */ +void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev) +{ + int rc; + + rc = devres_release(dev, devm_rdev_release, devm_rdev_match, rdev); + if (rc != 0) + WARN_ON(rc); +} +EXPORT_SYMBOL_GPL(devm_regulator_unregister); diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h new file mode 100644 index 0000000..84bbda1 --- /dev/null +++ b/drivers/regulator/internal.h @@ -0,0 +1,38 @@ +/* + * internal.h -- Voltage/Current Regulator framework internal code + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * Copyright 2008 SlimLogic Ltd. + * + * Author: Liam Girdwood <lrg(a)slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __REGULATOR_INTERNAL_H +#define __REGULATOR_INTERNAL_H + +/* + * struct regulator + * + * One for each consumer device. + */ +struct regulator { + struct device *dev; + struct list_head list; + unsigned int always_on:1; + unsigned int bypass:1; + int uA_load; + int min_uV; + int max_uV; + char *supply_name; + struct device_attribute dev_attr; + struct regulator_dev *rdev; + struct dentry *debugfs; +}; + +#endif -- 1.8.4.rc3

12 years

next-20130912 boot: 21 pass, 1 fail (next-20130912)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: next-20130912 Git describe: next-20130912 Commit: c2bbc01ff5 Add linux-next specific files for 20130912 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: arm-omap2plus_defconfig Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 15.0 sec arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 11.5 sec omap3-beagle-xm PASS: 0 min 48.8 sec am335x-bone PASS: 0 min 33.4 sec sun4i-a10-cubieboard PASS: 0 min 14.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 43.7 sec omap4-panda PASS: 1 min 3.5 sec imx6q-wandboard PASS: 0 min 15.6 sec omap3-tobi,3730storm PASS: 0 min 40.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.8 sec omap3-beagle PASS: 1 min 5.8 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 34.5 sec arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 51.9 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.5 sec omap4-panda FAIL: 0 min 0.0 sec omap4-panda-es PASS: 1 min 11.0 sec omap3-tobi,3730storm PASS: 0 min 41.6 sec omap3-beagle PASS: 0 min 51.2 sec Console logs for failures ========================= arm-omap2plus_defconfig ----------------------- omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- [ 2.649475] mmc0: new high speed SD card at address aaaa [ 2.657531] mmcblk0: mmc0:aaaa SD02G 1.84 GiB [ 2.667602] mmcblk0: p1 p2 [ 20.983398] EXT4-fs (mmcblk0p2): recovery complete [ 20.998321] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 21.007171] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 21.015777] devtmpfs: mounted [ 21.020141] Freeing unused kernel memory: 392K (c0750000 - c07b2000) [ 21.559326] init: ureadahead main process (790) terminated with status 5 mountall: Disconnected from Plymouth mount.nfs: Failed to resolve server paris: System error mountall: mount /test [1560] terminated with status 32 * Setting sensors limits [80G [74G[ OK ] * Loading cpufreq kernel modules... [80G Last login: Wed Sep 11 14:52:39 UTC 2013 on tty1 [74G[ OK ] Welcome to Linaro 13.08 (GNU/Linux 3.11.0-next-20130912 armv7l) * Documentation: https://wiki.linaro.org/ * CPUFreq Utilities: Setting ondemand CPUFreq governor... [80G * disabled, governor not available... [80G root@linaro-developer:~# [74G[ OK ] ~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL

12 years

next-20130912 build: 0 failures 17 warnings (next-20130912)

by Kevin Hilman build bot

Automated build results for all ARM defconfigs. Summarizes all build errors, warnings and section mismatches followed by a per-defconfig summary. Tree/Branch: next-20130912 Git describe: next-20130912 Commit: c2bbc01ff5 Add linux-next specific files for 20130912 Build Time: 106 min 36 sec Passed: 129 / 129 (100.00 %) Failed: 0 / 129 ( 0.00 %) Errors: 0 Warnings: 17 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): arm-spitz_defconfig: 1 warnings 0 mismatches arm-mini2440_defconfig: 1 warnings 0 mismatches arm-multi_v7_defconfig+lpae.config: 16 warnings 0 mismatches arm-iop13xx_defconfig: 1 warnings 0 mismatches arm-corgi_defconfig: 1 warnings 0 mismatches arm-iop32x_defconfig: 1 warnings 0 mismatches ------------------------------------------------------------------------------- Warnings Summary: 17 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm-spitz_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-mini2440_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v7_defconfig+lpae.config : PASS, 0 errors, 16 warnings, 0 section mismatches Warnings: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ------------------------------------------------------------------------------- arm-iop13xx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-corgi_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-iop32x_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm-realview-smp_defconfig arm-at91rm9200_defconfig arm-pcm027_defconfig arm-rmk-omap3430-ldp.config arm-bcm2835_defconfig arm-ixp4xx_defconfig arm-dove_defconfig arm-nuc950_defconfig arm-ebsa110_defconfig arm-at91sam9261_9g10_defconfig arm-omap2plus_defconfig arm-bockw_defconfig arm-hackkit_defconfig arm-cns3420vb_defconfig arm-u300_defconfig arm-bcm_defconfig arm-exynos_defconfig arm-imx_v4_v5_defconfig arm-zeus_defconfig arm-rmk-sa11x0-neponset.config arm-davinci_all_defconfig arm-badge4_defconfig arm-exynos_defconfig+lpae.config arm-nuc960_defconfig arm-shark_defconfig arm-allnoconfig arm-em_x270_defconfig arm-armadillo800eva_defconfig arm-trizeps4_defconfig arm-acs5k_defconfig arm-rmk-realview.config arm-at91sam9260_9g20_defconfig arm-lpc32xx_defconfig arm-rmk-omap4430-ldp-allnoconfig.config arm-rmk-versatile.config arm-vexpress_defconfig arm-ape6evm_defconfig arm-netx_defconfig arm-socfpga_defconfig arm-orion5x_defconfig arm-cm_x2xx_defconfig arm-da8xx_omapl_defconfig arm-omap2plus_defconfig+pm.config arm-at91x40_defconfig arm-cerfcube_defconfig arm-versatile_defconfig arm-am200epdkit_defconfig arm-rmk-omap3430-ldp-allnoconfig.config arm-simpad_defconfig arm-pxa910_defconfig arm-acs5k_tiny_defconfig arm-xcep_defconfig arm-s5pv210_defconfig arm-at91_dt_defconfig arm-palmz72_defconfig arm-ezx_defconfig arm-imote2_defconfig arm-netwinder_defconfig arm-iop33x_defconfig arm-rmk-pxa.config arm-assabet_defconfig arm-magician_defconfig arm-mainstone_defconfig arm-s5pc100_defconfig arm-lager_defconfig arm-spear3xx_defconfig arm-shannon_defconfig arm-at91sam9g45_defconfig arm-prima2_defconfig arm-jornada720_defconfig arm-s3c2410_defconfig arm-pxa255-idp_defconfig arm-h3600_defconfig arm-colibri_pxa270_defconfig arm-nhk8815_defconfig arm-nuc910_defconfig arm-viper_defconfig arm-colibri_pxa300_defconfig arm-pleb_defconfig arm-mmp2_defconfig arm-spear6xx_defconfig arm-eseries_pxa_defconfig arm-ks8695_defconfig arm-raumfeld_defconfig arm-integrator_defconfig arm-footbridge_defconfig arm-pxa168_defconfig arm-multi_v7_defconfig arm-s5p64x0_defconfig arm-rpc_defconfig arm-mxs_defconfig arm-pxa3xx_defconfig arm-omap1_defconfig arm-kzm9d_defconfig arm-rmk-vexpress-ct9x4.config arm-ep93xx_defconfig arm-keystone_defconfig arm-at91sam9rl_defconfig arm-lubbock_defconfig arm-s3c6400_defconfig arm-imx_v6_v7_defconfig arm-at91sam9263_defconfig arm-mackerel_defconfig arm-clps711x_defconfig arm-collie_defconfig arm-tegra_defconfig arm-lart_defconfig arm-marzen_defconfig arm-kzm9g_defconfig arm-tct_hammer_defconfig arm-mv78xx0_defconfig arm-realview_defconfig arm-msm_defconfig arm-u8500_defconfig arm-cm_x300_defconfig arm-h5000_defconfig arm-kirkwood_defconfig arm-mvebu_defconfig arm-lpd270_defconfig arm-rmk-omap4430-ldp.config arm-sama5_defconfig arm-neponset_defconfig arm-spear13xx_defconfig

12 years

[PATCH] ARM: signal: sigreturn_codes fix build breakage for old arch

by Victor Kamensky

Hi Ben, Dave, Russell, This is addtion to previously posted patch 'ARM: signal: sigreturn_codes should be endian neutral' http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/195176.ht… Ben, who graciously agreed to include my above V3 version of patch into his BE series, reported that above patch breaks build of some old architectures. I believe I am able to reproduce the issue using rpc_defconfig. Build fails with messages like these (full gcc invocation could be found below in Apendix 1): arch/arm/kernel/sigreturn_codes.S: Assembler messages: arch/arm/kernel/sigreturn_codes.S:46: Error: selected processor does not support THUMB opcodes arch/arm/kernel/sigreturn_codes.S:47: Error: selected processor does not support Thumb mode `movs r7,#((0x900000+119)-0x900000)' <snip> When I proposed first version of the patch using asm/opcodes.h macros http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/191543.ht… we discussed that it is better to use separate assembler file with right asm mnemonics and let toolchain to do right thing - byte swapping instructions depending on endianity. It was highlighted the assumption is that we have sufficiently thumb-capable tools. In sigreturn_codes.S I explicitly used asm '.thumb' directive. However I failed to realize that even toolchain is thumb-capable it depends on -march=XXX gcc command line option whether gas takes .thumb opcodes or not. For architectures below v6, non t variants (like -march=armv3 used by rpc_defconfig) it fails to compile .S file with .thumb directive in it. Please see below Apendix 2 for small examples. To fix the issue I considered several options. I created fix patch with my preferred choice, which follows this cover letter, but I am looking for other folks feedback and opinions and/or maybe suggestions for other better ways to address it. Switch arch with explicity .arch asm directive ---------------------------------------------- The idea of this approach is to switch arm architecture explicitly with '.arch' asm directive inside of sigreturn_codes.S if arch that set by Makefile is too low Diff will look like this: diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S index c888c43..3c5d0f2 100644 --- a/arch/arm/kernel/sigreturn_codes.S +++ b/arch/arm/kernel/sigreturn_codes.S @@ -30,6 +30,17 @@ * snippets. */ +#if __LINUX_ARM_ARCH__ <= 4 + /* + * Note we manually set minimally required arch that supports + * required thumb opcodes for early arch versions. It is OK + * for this file to be used in combination with other + * lower arch variants, since these code snippets are only + * used as input data. + */ + .arch armv4t +#endif + .section .rodata .global sigreturn_codes .type sigreturn_codes, #object Note with this approach if modern abi is used and explicit '.arch armv4t' is used, gas generate "File Attributes" that contain 'Tag_CPU_name: "4T"' and 'Tag_CPU_arch: v4T' tag records. I would like not to have mismatch with other object file so '.arch armv4t' usage is conditional - only for old arch values. Note for rpc_defconfig test case old '-mabi=apcs-gnu' option is used, and in this case no "File Attributes" is generated. Although mixing .o file with different Tag_CPU_arch tags may not be big issue as long as valuea are compatible. I do see in CONFIG_ARCH_MULTIPLATFORM case .o files with 'Tag_CPU_arch: v6K' are mixed with object files with 'Tag_CPU_arch: v7'. This is my preferred approach. Complete proposed diff follows this cover letter. Conditional compilation based on __LINUX_ARM_ARCH__ value --------------------------------------------------------- Use '#if __LINUX_ARM_ARCH__ >= 6' condition around .thumb asm sequences, if not, fallback to constructing opcode manually as original sigretun_codes did. Code will look something like this: +#if __LINUX_ARM_ARCH__ >= 5 .thumb movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) swi #0 +#else + /* + * gas will not take .thumb opcodes for older arch, + * construct them manually + */ + .long (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE)) +#endif this approach is safe bet but manually generated opcodes seems to be step backward Use asm/opcodes.h macros ------------------------ With this approach we can abandon use of separate .S file and use macros from <asm/opcodes.h>. Effectively it will back out my v3 version of patch and apply v1 version as I posted here: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/191543.ht… Any other suggestions? ---------------------- Testing ------- I tested LE and BE pandaboard in Linaro tree and BE patch series. Original LTP ./rt_sigactionNN tests have been run. Tested build of rpc_defconfig which has CONFIG_CPU_32v3 and exhibited build problem. Beyond that I struggle to find old machine that would fail to build. Also I looked at kirkwood_defconfig there was no issue with original patch, it is CONFIG_CPU_32v5 which implies -march=armv5te or -march=armv4t, both OK with .thumb integrator_defconfig there was no issue with original patch, it is CONFIG_CPU_32v4t which implies -march=armv4t, which is OK with .thumb ixp4xx_defconfig there was no issue with original patch, it is CONFIG_CPU_32v5 and it is in CONFIG_CPU_BIG_ENDIAN=y (BE32). This is compiled with -march=armv5te. sigreturn_codes look OK. Before original patch thumb instrs were swapped. Any other suggestions for old boards configs to test? Apendix 1 full failed compile line ---------------------------------- arm-linux-gnueabihf-gcc -Wp,-MD,arch/arm/kernel/.sigreturn_codes.o.d \ -nostdinc -isystem /run/media/kamensky/wd/linaro/gcc-linaro-arm-linux-gnueabihf-4.7-2013.01-20130125_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.7.3/include \ -I/run/media/kamensky/wd/linaro/linux-linaro-core-tracking/091013/linux-linaro-tracking-be/arch/arm/include -Iarch/arm/include/generated \ -Iinclude -I/run/media/kamensky/wd/linaro/linux-linaro-core-tracking/091013/linux-linaro-tracking-be/arch/arm/include/uapi -Iarch/arm/include/generated/uapi \ -I/run/media/kamensky/wd/linaro/linux-linaro-core-tracking/091013/linux-linaro-tracking-be/include/uapi -Iinclude/generated/uapi -include \ /run/media/kamensky/wd/linaro/linux-linaro-core-tracking/091013/linux-linaro-tracking-be/include/linux/kconfig.h -D__KERNEL__ -mlittle-endian \ -Iarch/arm/mach-rpc/include -D__ASSEMBLY__ -mabi=apcs-gnu -mno-thumb-interwork -marm -D__LINUX_ARM_ARCH__=3 -march=armv3 -mtune=strongarm110 \ -include asm/unified.h -msoft-float -gdwarf-2 -c -o arch/arm/kernel/sigreturn_codes.o arch/arm/kernel/sigreturn_codes.S arch/arm/kernel/sigreturn_codes.S: Assembler messages: arch/arm/kernel/sigreturn_codes.S:46: Error: selected processor does not support THUMB opcodes arch/arm/kernel/sigreturn_codes.S:47: Error: selected processor does not support Thumb mode `movs r7,#((0x900000+119)-0x900000)' <snip> Apendix 2 -march and .thumb simple test case -------------------------------------------- [kamensky@kamensky-w530 linux-linaro-tracking-be]$ cat t.S sigreturn_codes: .thumb movs r7, #157 [kamensky@kamensky-w530 linux-linaro-tracking-be]$ arm-linux-gnueabihf-gcc -nostdinc -mlittle-endian -mno-thumb-interwork -mabi=apcs-gnu -marm -march=armv3 -msoft-float -c -o t.o t.S t.S: Assembler messages: t.S:2: Error: selected processor does not support THUMB opcodes t.S:3: Error: selected processor does not support Thumb mode `movs r7,#157' [kamensky@kamensky-w530 linux-linaro-tracking-be]$ arm-linux-gnueabihf-gcc -nostdinc -mlittle-endian -mno-thumb-interwork -mabi=apcs-gnu -marm -march=armv5 -msoft-float -c -o t.o t.S t.S: Assembler messages: t.S:2: Error: selected processor does not support THUMB opcodes t.S:3: Error: selected processor does not support Thumb mode `movs r7,#157' [kamensky@kamensky-w530 linux-linaro-tracking-be]$ arm-linux-gnueabihf-gcc -nostdinc -mlittle-endian -mno-thumb-interwork -mabi=apcs-gnu -marm -march=armv6 -msoft-float -c -o t.o t.S [kamensky@kamensky-w530 linux-linaro-tracking-be]$ arm-linux-gnueabihf-gcc -nostdinc -mlittle-endian -mno-thumb-interwork -mabi=apcs-gnu -march=armv7 -msoft-float -c -o t.o t.S Thanks, Victor Victor Kamensky (1): ARM: signal: sigreturn_codes fix build breakage for old arch arch/arm/kernel/sigreturn_codes.S | 11 +++++++++++ 1 file changed, 11 insertions(+) -- 1.8.1.4

12 years

linus/HEAD boot: 21 pass, 1 fail (v3.11-9420-gd5d04bb)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/HEAD Git describe: v3.11-9420-gd5d04bb Commit: d5d04bb48f Bye, bye, WfW flag Failed boot tests (console logs at the end) =========================================== exynos5250-arndale: FAIL: arm-exynos_defconfig Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 15.0 sec arm-multi_v7_defconfig ---------------------- omap4-panda-es PASS: 1 min 7.7 sec omap3-beagle-xm PASS: 0 min 51.9 sec am335x-bone PASS: 0 min 33.3 sec sun4i-a10-cubieboard PASS: 0 min 11.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 40.7 sec omap4-panda PASS: 0 min 59.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 40.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-beagle PASS: 0 min 56.3 sec arm-exynos_defconfig -------------------- exynos5250-arndale FAIL: 0 min 0.0 sec arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 52.3 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.4 sec omap4-panda PASS: 1 min 3.7 sec omap4-panda-es PASS: 1 min 10.5 sec omap3-tobi,3730storm PASS: 0 min 41.3 sec omap3-beagle PASS: 0 min 52.0 sec Console logs for failures ========================= arm-exynos_defconfig -------------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- ARNDALE5250 # setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ARNDALE5250 # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' ARNDALE5250 # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi ARNDALE5250 # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found ARNDALE5250 # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no ARNDALE5250 # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 ~$off # PYBOOT: Exception: u-boot: ERROR: timed-out getting DHCP address. # PYBOOT: Time: 0.00 seconds. # PYBOOT: Result: FAIL

12 years

linus/HEAD build: 4 failures 20 warnings (v3.11-9420-gd5d04bb)

by Kevin Hilman build bot

Automated build results for all ARM defconfigs. Summarizes all build errors, warnings and section mismatches followed by a per-defconfig summary. Tree/Branch: linus/HEAD Git describe: v3.11-9420-gd5d04bb Commit: d5d04bb48f Bye, bye, WfW flag Build Time: 45 min 21 sec Passed: 125 / 129 ( 96.90 %) Failed: 4 / 129 ( 3.10 %) Errors: 3 Warnings: 20 Section Mismatches: 0 Failed defconfigs: arm-lager_defconfig arm-raumfeld_defconfig arm-cm_x300_defconfig arm-pxa3xx_defconfig Errors: arm-lager_defconfig arch/arm/mach-shmobile/board-lager.c:99:2: error: unknown field ‘register_type’ specified in initializer arch/arm/mach-shmobile/board-lager.c:99:19: error: ‘SH_ETH_REG_FAST_RCAR’ undeclared here (not in a function) arm-raumfeld_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] arm-cm_x300_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] arm-pxa3xx_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): arm-spitz_defconfig: 2 warnings 0 mismatches arm-ezx_defconfig: 1 warnings 0 mismatches arm-davinci_all_defconfig: 1 warnings 0 mismatches arm-imote2_defconfig: 1 warnings 0 mismatches arm-mini2440_defconfig: 1 warnings 0 mismatches arm-multi_v7_defconfig+lpae.config: 16 warnings 0 mismatches arm-iop32x_defconfig: 1 warnings 0 mismatches arm-iop13xx_defconfig: 1 warnings 0 mismatches arm-corgi_defconfig: 2 warnings 0 mismatches arm-ebsa110_defconfig: 1 warnings 0 mismatches arm-raumfeld_defconfig: 1 warnings 0 mismatches arm-pxa3xx_defconfig: 1 warnings 0 mismatches arm-zeus_defconfig: 1 warnings 0 mismatches arm-cm_x2xx_defconfig: 1 warnings 0 mismatches arm-em_x270_defconfig: 1 warnings 0 mismatches arm-da8xx_omapl_defconfig: 1 warnings 0 mismatches ------------------------------------------------------------------------------- Errors summary: 3 3 drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] 1 arch/arm/mach-shmobile/board-lager.c:99:2: error: unknown field ‘register_type’ specified in initializer 1 arch/arm/mach-shmobile/board-lager.c:99:19: error: ‘SH_ETH_REG_FAST_RCAR’ undeclared here (not in a function) Warnings Summary: 20 9 arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 drivers/i2c/busses/i2c-davinci.c:665:2: warning: passing argument 1 of ‘dev_get_platdata’ from incompatible pointer type [enabled by default] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] 1 arch/arm/mach-ebsa110/core.c:225:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm-spitz_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-ezx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-davinci_all_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: drivers/i2c/busses/i2c-davinci.c:665:2: warning: passing argument 1 of ‘dev_get_platdata’ from incompatible pointer type [enabled by default] ------------------------------------------------------------------------------- arm-imote2_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-mini2440_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v7_defconfig+lpae.config : PASS, 0 errors, 16 warnings, 0 section mismatches Warnings: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ------------------------------------------------------------------------------- arm-iop32x_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-iop13xx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-lager_defconfig : FAIL, 2 errors, 0 warnings, 0 section mismatches Errors: arch/arm/mach-shmobile/board-lager.c:99:2: error: unknown field ‘register_type’ specified in initializer arch/arm/mach-shmobile/board-lager.c:99:19: error: ‘SH_ETH_REG_FAST_RCAR’ undeclared here (not in a function) ------------------------------------------------------------------------------- arm-corgi_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-ebsa110_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/mach-ebsa110/core.c:225:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] ------------------------------------------------------------------------------- arm-raumfeld_defconfig : FAIL, 1 errors, 1 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-cm_x300_defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- arm-pxa3xx_defconfig : FAIL, 1 errors, 1 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-zeus_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-cm_x2xx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-em_x270_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-da8xx_omapl_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: drivers/i2c/busses/i2c-davinci.c:665:2: warning: passing argument 1 of ‘dev_get_platdata’ from incompatible pointer type [enabled by default] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm-realview-smp_defconfig arm-at91rm9200_defconfig arm-pcm027_defconfig arm-rmk-omap3430-ldp.config arm-bcm2835_defconfig arm-ixp4xx_defconfig arm-dove_defconfig arm-nuc950_defconfig arm-at91sam9261_9g10_defconfig arm-omap2plus_defconfig arm-bockw_defconfig arm-hackkit_defconfig arm-cns3420vb_defconfig arm-u300_defconfig arm-bcm_defconfig arm-exynos_defconfig arm-rmk-sa11x0-neponset.config arm-badge4_defconfig arm-exynos_defconfig+lpae.config arm-nuc960_defconfig arm-shark_defconfig arm-allnoconfig arm-armadillo800eva_defconfig arm-colibri_pxa300_defconfig arm-acs5k_defconfig arm-rmk-realview.config arm-at91sam9260_9g20_defconfig arm-lpc32xx_defconfig arm-rmk-omap4430-ldp-allnoconfig.config arm-rmk-versatile.config arm-vexpress_defconfig arm-ape6evm_defconfig arm-netx_defconfig arm-socfpga_defconfig arm-orion5x_defconfig arm-omap2plus_defconfig+pm.config arm-at91x40_defconfig arm-cerfcube_defconfig arm-versatile_defconfig arm-am200epdkit_defconfig arm-rmk-omap3430-ldp-allnoconfig.config arm-simpad_defconfig arm-pxa910_defconfig arm-acs5k_tiny_defconfig arm-xcep_defconfig arm-s5pv210_defconfig arm-at91_dt_defconfig arm-palmz72_defconfig arm-netwinder_defconfig arm-iop33x_defconfig arm-rmk-pxa.config arm-assabet_defconfig arm-magician_defconfig arm-mainstone_defconfig arm-s5pc100_defconfig arm-spear3xx_defconfig arm-shannon_defconfig arm-at91sam9g45_defconfig arm-prima2_defconfig arm-jornada720_defconfig arm-s3c2410_defconfig arm-pxa255-idp_defconfig arm-h3600_defconfig arm-colibri_pxa270_defconfig arm-nhk8815_defconfig arm-viper_defconfig arm-trizeps4_defconfig arm-pleb_defconfig arm-mmp2_defconfig arm-spear6xx_defconfig arm-eseries_pxa_defconfig arm-ks8695_defconfig arm-imx_v4_v5_defconfig arm-integrator_defconfig arm-footbridge_defconfig arm-pxa168_defconfig arm-multi_v7_defconfig arm-s5p64x0_defconfig arm-rpc_defconfig arm-mxs_defconfig arm-nuc910_defconfig arm-omap1_defconfig arm-kzm9d_defconfig arm-rmk-vexpress-ct9x4.config arm-ep93xx_defconfig arm-keystone_defconfig arm-at91sam9rl_defconfig arm-lubbock_defconfig arm-s3c6400_defconfig arm-imx_v6_v7_defconfig arm-at91sam9263_defconfig arm-mackerel_defconfig arm-clps711x_defconfig arm-collie_defconfig arm-tegra_defconfig arm-lart_defconfig arm-marzen_defconfig arm-kzm9g_defconfig arm-tct_hammer_defconfig arm-mv78xx0_defconfig arm-realview_defconfig arm-msm_defconfig arm-u8500_defconfig arm-h5000_defconfig arm-kirkwood_defconfig arm-mvebu_defconfig arm-lpd270_defconfig arm-rmk-omap4430-ldp.config arm-sama5_defconfig arm-neponset_defconfig arm-spear13xx_defconfig

12 years

linus/HEAD boot: 0 pass, 0 fail (v3.11-9419-g1ae276a)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/HEAD Git describe: v3.11-9419-g1ae276a Commit: 1ae276a911 Merge tag 'ecryptfs-3.12-rc1-crypt-ctx' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

12 years

linus/HEAD build: 4 failures 20 warnings (v3.11-9419-g1ae276a)

by Kevin Hilman build bot

Automated build results for all ARM defconfigs. Summarizes all build errors, warnings and section mismatches followed by a per-defconfig summary. Tree/Branch: linus/HEAD Git describe: v3.11-9419-g1ae276a Commit: 1ae276a911 Merge tag 'ecryptfs-3.12-rc1-crypt-ctx' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Build Time: 46 min 35 sec Passed: 125 / 129 ( 96.90 %) Failed: 4 / 129 ( 3.10 %) Errors: 3 Warnings: 20 Section Mismatches: 0 Failed defconfigs: arm-lager_defconfig arm-raumfeld_defconfig arm-cm_x300_defconfig arm-pxa3xx_defconfig Errors: arm-lager_defconfig arch/arm/mach-shmobile/board-lager.c:99:2: error: unknown field ‘register_type’ specified in initializer arch/arm/mach-shmobile/board-lager.c:99:19: error: ‘SH_ETH_REG_FAST_RCAR’ undeclared here (not in a function) arm-raumfeld_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] arm-cm_x300_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] arm-pxa3xx_defconfig drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): arm-spitz_defconfig: 2 warnings 0 mismatches arm-ezx_defconfig: 1 warnings 0 mismatches arm-davinci_all_defconfig: 1 warnings 0 mismatches arm-imote2_defconfig: 1 warnings 0 mismatches arm-mini2440_defconfig: 1 warnings 0 mismatches arm-multi_v7_defconfig+lpae.config: 16 warnings 0 mismatches arm-iop32x_defconfig: 1 warnings 0 mismatches arm-iop13xx_defconfig: 1 warnings 0 mismatches arm-corgi_defconfig: 2 warnings 0 mismatches arm-ebsa110_defconfig: 1 warnings 0 mismatches arm-raumfeld_defconfig: 1 warnings 0 mismatches arm-pxa3xx_defconfig: 1 warnings 0 mismatches arm-zeus_defconfig: 1 warnings 0 mismatches arm-cm_x2xx_defconfig: 1 warnings 0 mismatches arm-em_x270_defconfig: 1 warnings 0 mismatches arm-da8xx_omapl_defconfig: 1 warnings 0 mismatches ------------------------------------------------------------------------------- Errors summary: 3 3 drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] 1 arch/arm/mach-shmobile/board-lager.c:99:2: error: unknown field ‘register_type’ specified in initializer 1 arch/arm/mach-shmobile/board-lager.c:99:19: error: ‘SH_ETH_REG_FAST_RCAR’ undeclared here (not in a function) Warnings Summary: 20 9 arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 drivers/i2c/busses/i2c-davinci.c:665:2: warning: passing argument 1 of ‘dev_get_platdata’ from incompatible pointer type [enabled by default] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] 1 drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] 1 arch/arm/mach-ebsa110/core.c:225:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm-spitz_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-ezx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-davinci_all_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: drivers/i2c/busses/i2c-davinci.c:665:2: warning: passing argument 1 of ‘dev_get_platdata’ from incompatible pointer type [enabled by default] ------------------------------------------------------------------------------- arm-imote2_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-mini2440_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v7_defconfig+lpae.config : PASS, 0 errors, 16 warnings, 0 section mismatches Warnings: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1092:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-sdma.c:1166:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:579:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:593:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:603:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:930:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/dma/imx-dma.c:960:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat] drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘dma_addr_t’ [-Wformat] drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ------------------------------------------------------------------------------- arm-iop32x_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-iop13xx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-lager_defconfig : FAIL, 2 errors, 0 warnings, 0 section mismatches Errors: arch/arm/mach-shmobile/board-lager.c:99:2: error: unknown field ‘register_type’ specified in initializer arch/arm/mach-shmobile/board-lager.c:99:19: error: ‘SH_ETH_REG_FAST_RCAR’ undeclared here (not in a function) ------------------------------------------------------------------------------- arm-corgi_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-ebsa110_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/mach-ebsa110/core.c:225:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] ------------------------------------------------------------------------------- arm-raumfeld_defconfig : FAIL, 1 errors, 1 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-cm_x300_defconfig : FAIL, 1 errors, 0 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- arm-pxa3xx_defconfig : FAIL, 1 errors, 1 warnings, 0 section mismatches Errors: drivers/mtd/nand/pxa3xx_nand.c:1325:2: error: implicit declaration of function ‘pxa3xx_nand_get_variant’ [-Werror=implicit-function-declaration] Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-zeus_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-cm_x2xx_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-em_x270_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: arch/arm/plat-pxa/ssp.c:145:17: warning: ‘dma_spec.args[0]’ may be used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-da8xx_omapl_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: drivers/i2c/busses/i2c-davinci.c:665:2: warning: passing argument 1 of ‘dev_get_platdata’ from incompatible pointer type [enabled by default] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm-realview-smp_defconfig arm-at91rm9200_defconfig arm-pcm027_defconfig arm-rmk-omap3430-ldp.config arm-bcm2835_defconfig arm-ixp4xx_defconfig arm-dove_defconfig arm-nuc950_defconfig arm-at91sam9261_9g10_defconfig arm-omap2plus_defconfig arm-bockw_defconfig arm-hackkit_defconfig arm-cns3420vb_defconfig arm-u300_defconfig arm-bcm_defconfig arm-exynos_defconfig arm-rmk-sa11x0-neponset.config arm-badge4_defconfig arm-exynos_defconfig+lpae.config arm-nuc960_defconfig arm-shark_defconfig arm-allnoconfig arm-armadillo800eva_defconfig arm-colibri_pxa300_defconfig arm-acs5k_defconfig arm-rmk-realview.config arm-at91sam9260_9g20_defconfig arm-lpc32xx_defconfig arm-rmk-omap4430-ldp-allnoconfig.config arm-rmk-versatile.config arm-vexpress_defconfig arm-ape6evm_defconfig arm-netx_defconfig arm-socfpga_defconfig arm-orion5x_defconfig arm-omap2plus_defconfig+pm.config arm-at91x40_defconfig arm-cerfcube_defconfig arm-versatile_defconfig arm-am200epdkit_defconfig arm-rmk-omap3430-ldp-allnoconfig.config arm-simpad_defconfig arm-pxa910_defconfig arm-acs5k_tiny_defconfig arm-xcep_defconfig arm-s5pv210_defconfig arm-at91_dt_defconfig arm-palmz72_defconfig arm-netwinder_defconfig arm-iop33x_defconfig arm-rmk-pxa.config arm-assabet_defconfig arm-magician_defconfig arm-mainstone_defconfig arm-s5pc100_defconfig arm-spear3xx_defconfig arm-shannon_defconfig arm-at91sam9g45_defconfig arm-prima2_defconfig arm-jornada720_defconfig arm-s3c2410_defconfig arm-pxa255-idp_defconfig arm-h3600_defconfig arm-colibri_pxa270_defconfig arm-nhk8815_defconfig arm-viper_defconfig arm-trizeps4_defconfig arm-pleb_defconfig arm-mmp2_defconfig arm-spear6xx_defconfig arm-eseries_pxa_defconfig arm-ks8695_defconfig arm-imx_v4_v5_defconfig arm-integrator_defconfig arm-footbridge_defconfig arm-pxa168_defconfig arm-multi_v7_defconfig arm-s5p64x0_defconfig arm-rpc_defconfig arm-mxs_defconfig arm-nuc910_defconfig arm-omap1_defconfig arm-kzm9d_defconfig arm-rmk-vexpress-ct9x4.config arm-ep93xx_defconfig arm-keystone_defconfig arm-at91sam9rl_defconfig arm-lubbock_defconfig arm-s3c6400_defconfig arm-imx_v6_v7_defconfig arm-at91sam9263_defconfig arm-mackerel_defconfig arm-clps711x_defconfig arm-collie_defconfig arm-tegra_defconfig arm-lart_defconfig arm-marzen_defconfig arm-kzm9g_defconfig arm-tct_hammer_defconfig arm-mv78xx0_defconfig arm-realview_defconfig arm-msm_defconfig arm-u8500_defconfig arm-h5000_defconfig arm-kirkwood_defconfig arm-mvebu_defconfig arm-lpd270_defconfig arm-rmk-omap4430-ldp.config arm-sama5_defconfig arm-neponset_defconfig arm-spear13xx_defconfig

12 years

linus/HEAD boot: 0 pass, 0 fail (v3.11-9411-gc2d9572)

by Kevin Hilman build bot

12 years

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel