linaro-kernel

linaro-kernel@lists.linaro.org

10094 discussions

next boot: 28 pass, 3 fail (next-20131101)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20131101 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig exynos5250-arndale: FAIL: exynos_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack FAIL: 0 min 41.2 sec omap3-beagle-xm PASS: 0 min 51.8 sec am335x-bone PASS: 0 min 26.5 sec omap4-panda PASS: 1 min 7.6 sec omap4-panda-es PASS: 1 min 3.5 sec omap3-tobi,3730storm PASS: 0 min 23.8 sec omap3-tobi,3530overo PASS: 0 min 21.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.7 sec imx6q-wandboard PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.8 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 33.4 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.5 sec tegra30-beaver PASS: 0 min 16.5 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 51.6 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 6.5 sec omap4-panda-es PASS: 1 min 3.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.9 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 19.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.7 sec omap3-tobi,3530overo PASS: 0 min 19.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 dhcp Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC c8:a0:30:b4:18:a4 HOST MAC de:ad:be:af:00:00 RNDIS ready ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 41.20 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 tmp/arndale-LgEThy/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.171 Filename 'tmp/arndale-LgEThy/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33005 (80ed hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.171:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 #bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb0ec Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.40 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.90 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

mainline boot: 31 pass, 0 fail (v3.12-rc7-79-g4f794ee)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc7-79-g4f794ee Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.6 sec omap3-beagle-xm PASS: 0 min 51.8 sec am335x-bone PASS: 0 min 26.1 sec omap4-panda PASS: 1 min 9.6 sec omap4-panda-es PASS: 1 min 3.2 sec omap3-tobi,3730storm PASS: 0 min 20.7 sec omap3-tobi,3530overo PASS: 0 min 21.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.3 sec tegra30-beaver PASS: 0 min 17.3 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 48.5 sec armada-370-mirabox PASS: 0 min 20.4 sec omap4-panda PASS: 0 min 58.9 sec omap4-panda-es PASS: 1 min 1.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 19.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 19.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 6 months

queue boot: 13 pass, 3 fail (v3.10.17-50-g47e02a3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.17-50-g47e02a3 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 51.9 sec am335x-bone PASS: 0 min 26.3 sec omap4-panda PASS: 1 min 4.6 sec omap4-panda-es PASS: 1 min 2.5 sec omap3-tobi,3730storm PASS: 0 min 35.6 sec omap3-tobi,3530overo PASS: 0 min 33.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 21.2 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.4 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.6 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 19.9 sec armada-370-mirabox FAIL: 0 min 17.9 sec sun4i-a10-cubieboard FAIL: 0 min 7.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275720>] (panic+0xa0/0x1e8) [<c0275720>] (panic+0xa0/0x1e8) from [<c0326110>] (mount_block_root+0x294/0x298) [<c0326110>] (mount_block_root+0x294/0x298) from [<c03262c4>] (prepare_namespace+0x14c/0x184) [<c03262c4>] (prepare_namespace+0x14c/0x184) from [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271484>] (kernel_init+0x8/0x158) [<c0271484>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.17-00050-g47e02a3 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c001234c>] (handle_IPI+0x108/0x130) [<c001234c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0355f70 to 0xc0355fb8) 5f60: c1d566d8 00000000 000000be 000000be 5f80: c037fa2c c035c4a8 c027cebc c0354000 c037fa2c c0354000 c0354000 c035c45c 5fa0: 0000001f c0355fb8 c000f070 c004f8e0 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) from [<c0325a3c>] (start_kernel+0x2c4/0x2d0) [<c0325a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 19.94 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.17-00050-g47e02a3 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275720>] (panic+0xa0/0x1e8) [<c0275720>] (panic+0xa0/0x1e8) from [<c0326110>] (mount_block_root+0x294/0x298) [<c0326110>] (mount_block_root+0x294/0x298) from [<c03262c4>] (prepare_namespace+0x14c/0x184) [<c03262c4>] (prepare_namespace+0x14c/0x184) from [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271484>] (kernel_init+0x8/0x158) [<c0271484>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.89 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.96 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

mainline boot: 31 pass, 0 fail (v3.12-rc7-65-g026f8f6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc7-65-g026f8f6 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 30.0 sec omap3-beagle-xm PASS: 0 min 50.7 sec am335x-bone PASS: 0 min 26.1 sec omap4-panda PASS: 1 min 10.0 sec omap4-panda-es PASS: 1 min 6.5 sec omap3-tobi,3730storm PASS: 0 min 23.4 sec omap3-tobi,3530overo PASS: 0 min 21.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.9 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 35.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.0 sec tegra30-beaver PASS: 0 min 14.2 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 51.5 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 2.1 sec omap4-panda-es PASS: 1 min 2.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 19.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 6 months

arm-soc boot: 30 pass, 1 fail (v3.12-rc5-895-gc1b35c6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.12-rc5-895-gc1b35c6 Failed boot tests (console logs at the end) =========================================== sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.7 sec omap3-beagle-xm PASS: 0 min 51.5 sec am335x-bone PASS: 0 min 26.4 sec omap4-panda PASS: 1 min 4.4 sec omap4-panda-es PASS: 1 min 9.4 sec omap3-tobi,3730storm PASS: 0 min 20.6 sec omap3-tobi,3530overo PASS: 0 min 21.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec imx6q-wandboard PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.5 sec tegra30-beaver PASS: 0 min 22.2 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 49.4 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 9.0 sec omap4-panda-es PASS: 1 min 8.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard FAIL: 0 min 7.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.95 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

next boot: 1 pass, 30 fail (next-20131031)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20131031 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap3-tobi,3730storm: FAIL: omap2plus_defconfig omap3-tobi,3530overo: FAIL: omap2plus_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack FAIL: 0 min 30.5 sec omap3-beagle-xm FAIL: 0 min 44.8 sec am335x-bone FAIL: 0 min 29.4 sec omap4-panda FAIL: 0 min 56.0 sec omap4-panda-es FAIL: 0 min 55.4 sec omap3-tobi,3730storm FAIL: 0 min 28.2 sec omap3-tobi,3530overo FAIL: 0 min 27.1 sec tegra_defconfig --------------- tegra30-beaver FAIL: 0 min 12.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 22.2 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.1 sec imx6q-wandboard FAIL: 0 min 20.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 28.9 sec armada-370-mirabox FAIL: 0 min 27.8 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 33.4 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 29.7 sec tegra30-beaver FAIL: 0 min 23.9 sec am335x-boneblack FAIL: 0 min 30.1 sec omap3-beagle-xm FAIL: 0 min 44.5 sec armada-370-mirabox FAIL: 0 min 28.6 sec omap4-panda FAIL: 0 min 55.3 sec omap4-panda-es FAIL: 0 min 57.3 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.4 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo FAIL: 0 min 21.2 sec am335x-bone FAIL: 0 min 28.9 sec imx6q-wandboard FAIL: 0 min 19.9 sec omap3-tobi,3730storm FAIL: 0 min 28.1 sec imx6dl-wandboard,wand-dual FAIL: 0 min 21.2 sec omap3-tobi,3530overo FAIL: 0 min 26.7 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 28.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- done Bytes transferred = 17911 (45f7 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 root=/dev/nfs nfsroot=192.168.1.2:/export/rootfs,nolock rw ip=dhcp U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.54 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/3730xm-dzheqm/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T ## 2 KiB/s done Bytes transferred = 14683 (395b hex) OMAP3 beagleboard.org #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff95a ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.82 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.35 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 2 KiB/s done Bytes transferred = 19948 (4dec hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.173:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f07deb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.97 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 2 KiB/s done Bytes transferred = 20188 (4edc hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.163:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f07edb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.44 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-fN5GAo/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *# 2 MiB/s done Bytes transferred = 14381 (382d hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff82c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.21 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ done Bytes transferred = 14381 (382d hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff6282c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.08 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 0.000000] 3f00: 00000000 c07a7ce0 fe206000 00000000 c084d1ec fe30e400 00000000 c078f3f8 [ 0.000000] 3f20: fe206030 00000007 00000001 c084d1ec c084d1ec c07e9370 c07b3f2c c084d210 [ 0.000000] 3f40: 00000000 c1862924 c07f263c 00000004 00000001 c07f244c c084d1a0 c07906bc [ 0.000000] 3f60: 00000001 00000002 00000004 00000000 00000000 00000000 c07ac018 c1862924 [ 0.000000] 3f80: c07ac018 c07b2000 c07a06d8 c07ba380 ffffffff c1868880 00000000 c078e61c [ 0.000000] 3fa0: c07ae2e0 c07ac264 c07ba380 c0803140 c07ba380 c07753c0 80000001 c07729a0 [ 0.000000] 3fc0: ffffffff ffffffff c0772578 00000000 00000000 c07a06d8 10c5387d c07ba3cc [ 0.000000] 3fe0: c07a06d4 c07bee10 8000406a 412fc099 00000000 80008074 00000000 00000000 [ 0.000000] [<c03c4aec>] (_clk_register+0x1a0/0x208) from [<c03c4b8c>] (clk_register+0x38/0x70) [ 0.000000] [<c03c4b8c>] (clk_register+0x38/0x70) from [<c03c5890>] (clk_register_gate+0xac/0x108) [ 0.000000] [<c03c5890>] (clk_register_gate+0xac/0x108) from [<c078f3f8>] (tegra_super_clk_gen4_init+0x1a4/0x2d0) [ 0.000000] [<c078f3f8>] (tegra_super_clk_gen4_init+0x1a4/0x2d0) from [<c07906bc>] (tegra30_clock_init+0x754/0xaf4) [ 0.000000] [<c07906bc>] (tegra30_clock_init+0x754/0xaf4) from [<c078e61c>] (of_clk_init+0x40/0x60) [ 0.000000] [<c078e61c>] (of_clk_init+0x40/0x60) from [<c07753c0>] (time_init+0x28/0x30) [ 0.000000] [<c07753c0>] (time_init+0x28/0x30) from [<c07729a0>] (start_kernel+0x1f8/0x340) [ 0.000000] [<c07729a0>] (start_kernel+0x1f8/0x340) from [<80008074>] (0x80008074) [ 0.000000] Code: e5886000 e5934014 e3540000 1affffb7 (e5970000) [ 0.000000] ---[ end trace 13adc9301e6db314 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 12.72 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.5 MiB/s done Bytes transferred = 33645 (836d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.179:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b36c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.17 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.4 MiB/s done Bytes transferred = 33645 (836d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.180:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b36c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.05 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 35284 (89d4 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.181:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4b1da0 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b9d3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.25 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2013-10-31 11:15:51 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2699697 Bytes = 2.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.86 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2013-10-31 11:15:23 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2696054 Bytes = 2.6 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.76 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 tmp/arndale-GPniWF/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.171 Filename 'tmp/arndale-GPniWF/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33005 (80ed hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.171:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb0ec Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.39 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ###################################################### done Bytes transferred = 3649556 (37b014 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.184:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3649492 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.67 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Bytes transferred = 20920 (51b8 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x376188 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830081b7 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 23.91 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- done Bytes transferred = 17911 (45f7 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 root=/dev/nfs nfsroot=192.168.1.2:/export/rootfs,nolock rw ip=dhcp U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.08 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/3730xm-Cwtkd0/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T ## 1000 Bytes/s done Bytes transferred = 14683 (395b hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org #bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff95a ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.46 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2013-10-31 11:02:08 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3639158 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.56 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 2 KiB/s done Bytes transferred = 19948 (4dec hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.173:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f07deb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.28 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 2 KiB/s done Bytes transferred = 20188 (4edc hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.163:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f07edb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.30 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2013-10-31 11:05:22 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3642801 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.38 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.92 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.4 MiB/s done Bytes transferred = 33645 (836d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.180:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b36c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.21 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.86 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 35284 (89d4 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.181:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x376188 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b9d3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.91 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-M_Vbyr/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *# 2 MiB/s done Bytes transferred = 14381 (382d hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff82c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.09 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.5 MiB/s done Bytes transferred = 33645 (836d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.179:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b36c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.19 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ done Bytes transferred = 14381 (382d hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff6282c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.69 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ### done Bytes transferred = 2897156 (2c3504 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.184:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2897092 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.25 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

queue boot: 25 pass, 0 fail (v3.11.6-62-ge5b2bf3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.11.6-62-ge5b2bf3 Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 52.8 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 3.3 sec omap4-panda-es PASS: 1 min 7.5 sec omap3-tobi,3730storm PASS: 0 min 20.7 sec omap3-tobi,3530overo PASS: 0 min 21.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 15.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 15.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ tegra30-beaver PASS: 0 min 17.3 sec omap3-beagle-xm PASS: 0 min 50.2 sec armada-370-mirabox PASS: 0 min 20.5 sec am335x-bone PASS: 0 min 33.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec omap4-panda PASS: 1 min 2.9 sec omap4-panda-es PASS: 1 min 2.2 sec omap3-tobi,3730storm PASS: 0 min 19.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 6 months

arm-soc boot: 31 pass, 0 fail (v3.12-rc5-885-g0a401bb)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.12-rc5-885-g0a401bb Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 0 min 51.0 sec am335x-bone PASS: 0 min 26.4 sec omap4-panda PASS: 1 min 4.3 sec omap4-panda-es PASS: 1 min 4.1 sec omap3-tobi,3730storm PASS: 0 min 20.3 sec omap3-tobi,3530overo PASS: 0 min 21.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.8 sec imx6q-wandboard PASS: 0 min 15.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.5 sec tegra30-beaver PASS: 0 min 17.1 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 52.0 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 6.0 sec omap4-panda-es PASS: 1 min 9.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 6 months

[PATCH] ASoC: pcm: Check for ops before deferencing them

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Ensure that we always check that an ops structure is present before we try to use it, improving the robustness of the system. Reported-by: Russell King <rmk+kernel(a)arm.linux.org.uk> Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/soc-pcm.c | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index d449872..d81b792 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -190,7 +190,7 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass); /* startup the audio subsystem */ - if (cpu_dai->driver->ops->startup) { + if (cpu_dai->driver->ops && cpu_dai->driver->ops->startup) { ret = cpu_dai->driver->ops->startup(substream, cpu_dai); if (ret < 0) { dev_err(cpu_dai->dev, "ASoC: can't open interface" @@ -208,7 +208,7 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) } } - if (codec_dai->driver->ops->startup) { + if (codec_dai->driver->ops && codec_dai->driver->ops->startup) { ret = codec_dai->driver->ops->startup(substream, codec_dai); if (ret < 0) { dev_err(codec_dai->dev, "ASoC: can't open codec" @@ -463,7 +463,7 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) } } - if (codec_dai->driver->ops->prepare) { + if (codec_dai->driver->ops && codec_dai->driver->ops->prepare) { ret = codec_dai->driver->ops->prepare(substream, codec_dai); if (ret < 0) { dev_err(codec_dai->dev, "ASoC: DAI prepare error: %d\n", @@ -472,7 +472,7 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) } } - if (cpu_dai->driver->ops->prepare) { + if (cpu_dai->driver->ops && cpu_dai->driver->ops->prepare) { ret = cpu_dai->driver->ops->prepare(substream, cpu_dai); if (ret < 0) { dev_err(cpu_dai->dev, "ASoC: DAI prepare error: %d\n", @@ -523,7 +523,7 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, } } - if (codec_dai->driver->ops->hw_params) { + if (codec_dai->driver->ops && codec_dai->driver->ops->hw_params) { ret = codec_dai->driver->ops->hw_params(substream, params, codec_dai); if (ret < 0) { dev_err(codec_dai->dev, "ASoC: can't set %s hw params:" @@ -532,7 +532,7 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, } } - if (cpu_dai->driver->ops->hw_params) { + if (cpu_dai->driver->ops && cpu_dai->driver->ops->hw_params) { ret = cpu_dai->driver->ops->hw_params(substream, params, cpu_dai); if (ret < 0) { dev_err(cpu_dai->dev, "ASoC: %s hw params failed: %d\n", @@ -559,11 +559,11 @@ out: return ret; platform_err: - if (cpu_dai->driver->ops->hw_free) + if (cpu_dai->driver->ops && cpu_dai->driver->ops->hw_free) cpu_dai->driver->ops->hw_free(substream, cpu_dai); interface_err: - if (codec_dai->driver->ops->hw_free) + if (codec_dai->driver->ops && codec_dai->driver->ops->hw_free) codec_dai->driver->ops->hw_free(substream, codec_dai); codec_err: @@ -600,10 +600,10 @@ static int soc_pcm_hw_free(struct snd_pcm_substream *substream) platform->driver->ops->hw_free(substream); /* now free hw params for the DAIs */ - if (codec_dai->driver->ops->hw_free) + if (codec_dai->driver->ops && codec_dai->driver->ops->hw_free) codec_dai->driver->ops->hw_free(substream, codec_dai); - if (cpu_dai->driver->ops->hw_free) + if (cpu_dai->driver->ops && cpu_dai->driver->ops->hw_free) cpu_dai->driver->ops->hw_free(substream, cpu_dai); mutex_unlock(&rtd->pcm_mutex); @@ -618,7 +618,7 @@ static int soc_pcm_trigger(struct snd_pcm_substream *substream, int cmd) struct snd_soc_dai *codec_dai = rtd->codec_dai; int ret; - if (codec_dai->driver->ops->trigger) { + if (codec_dai->driver->ops && codec_dai->driver->ops->trigger) { ret = codec_dai->driver->ops->trigger(substream, cmd, codec_dai); if (ret < 0) return ret; @@ -630,7 +630,7 @@ static int soc_pcm_trigger(struct snd_pcm_substream *substream, int cmd) return ret; } - if (cpu_dai->driver->ops->trigger) { + if (cpu_dai->driver->ops && cpu_dai->driver->ops->trigger) { ret = cpu_dai->driver->ops->trigger(substream, cmd, cpu_dai); if (ret < 0) return ret; @@ -647,19 +647,20 @@ static int soc_pcm_bespoke_trigger(struct snd_pcm_substream *substream, struct snd_soc_dai *codec_dai = rtd->codec_dai; int ret; - if (codec_dai->driver->ops->bespoke_trigger) { + if (codec_dai->driver->ops && + codec_dai->driver->ops->bespoke_trigger) { ret = codec_dai->driver->ops->bespoke_trigger(substream, cmd, codec_dai); if (ret < 0) return ret; } - if (platform->driver->bespoke_trigger) { + if (platform->driver->ops && platform->driver->bespoke_trigger) { ret = platform->driver->bespoke_trigger(substream, cmd); if (ret < 0) return ret; } - if (cpu_dai->driver->ops->bespoke_trigger) { + if (cpu_dai->driver->ops && cpu_dai->driver->ops->bespoke_trigger) { ret = cpu_dai->driver->ops->bespoke_trigger(substream, cmd, cpu_dai); if (ret < 0) return ret; @@ -684,10 +685,10 @@ static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream) if (platform->driver->ops && platform->driver->ops->pointer) offset = platform->driver->ops->pointer(substream); - if (cpu_dai->driver->ops->delay) + if (cpu_dai->driver->ops && cpu_dai->driver->ops->delay) delay += cpu_dai->driver->ops->delay(substream, cpu_dai); - if (codec_dai->driver->ops->delay) + if (codec_dai->driver->ops && codec_dai->driver->ops->delay) delay += codec_dai->driver->ops->delay(substream, codec_dai); if (platform->driver->delay) @@ -1673,7 +1674,7 @@ static int soc_pcm_ioctl(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_platform *platform = rtd->platform; - if (platform->driver->ops->ioctl) + if (platform->driver->ops && platform->driver->ops->ioctl) return platform->driver->ops->ioctl(substream, cmd, arg); return snd_pcm_lib_ioctl(substream, cmd, arg); } @@ -1934,8 +1935,8 @@ int soc_dpcm_be_digital_mute(struct snd_soc_pcm_runtime *fe, int mute) dev_dbg(be->dev, "ASoC: BE digital mute %s\n", be->dai_link->name); - if (drv->ops->digital_mute && dai->playback_active) - drv->ops->digital_mute(dai, mute); + if (drv->ops && drv->ops->digital_mute && dai->playback_active) + drv->ops->digital_mute(dai, mute); } return 0; @@ -2224,7 +2225,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dpcm_can_be_params); int snd_soc_platform_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_platform *platform) { - if (platform->driver->ops->trigger) + if (platform->driver->ops && platform->driver->ops->trigger) return platform->driver->ops->trigger(substream, cmd); return 0; } -- 1.8.4.rc3

11 years, 6 months

queue boot: 24 pass, 1 fail (v3.11.6-63-gd062644)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.11.6-63-gd062644 Failed boot tests (console logs at the end) =========================================== sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 53.1 sec am335x-bone PASS: 0 min 26.5 sec omap4-panda PASS: 1 min 3.4 sec omap4-panda-es PASS: 1 min 7.2 sec omap3-tobi,3730storm PASS: 0 min 23.6 sec omap3-tobi,3530overo PASS: 0 min 21.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 15.4 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 15.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.0 sec multi_v7_defconfig ------------------ tegra30-beaver PASS: 0 min 14.2 sec omap3-beagle-xm PASS: 0 min 49.9 sec armada-370-mirabox PASS: 0 min 20.5 sec am335x-bone PASS: 0 min 33.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec omap4-panda PASS: 1 min 3.9 sec omap4-panda-es PASS: 1 min 5.9 sec omap3-tobi,3730storm PASS: 0 min 22.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 20.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec Console logs for failures ========================= multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.90 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel