Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.14-602-g01d5f3b
Failed boot tests (console logs at the end)
===========================================
sama5d35ek: FAIL: sama5_defconfig
Full Report
===========
da8xx_omapl_defconfig
---------------------
da850-evm 0 min 15.2 sec: PASS (Warnings: 1)
legacy,da850evm 0 min 14.4 sec: PASS (Warnings: 1)
omap2plus_defconfig
-------------------
legacy,3730xm 0 min 50.8 sec: PASS
am335x-boneblack 0 min 25.6 sec: PASS
omap3-beagle-xm 1 min 6.2 sec: PASS
legacy,3530beagle 0 min 42.6 sec: PASS (Warnings: 1)
omap4-panda 1 min 12.3 sec: PASS
omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1)
am335x-bone 0 min 27.6 sec: PASS
omap3-overo-storm-tobi 0 min 25.5 sec: PASS
omap5-uevm 1 min 0.3 sec: PASS (Warnings: 1)
omap4-panda-es 1 min 8.0 sec: PASS
legacy,3730storm 0 min 20.8 sec: PASS
legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1)
multi_lpae_defconfig
--------------------
omap5-uevm 1 min 50.1 sec: PASS (Warnings: 1)
sun7i-a20-cubieboard2 0 min 14.7 sec: PASS
tegra_defconfig
---------------
tegra30-beaver 0 min 17.1 sec: PASS
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS
imx6dl-wandboard,wand-solo 0 min 18.6 sec: PASS
imx6q-wandboard 0 min 17.3 sec: PASS
msm_defconfig
-------------
qcom-apq8074-dragonboard 0 min 15.5 sec: PASS
bcm_defconfig
-------------
bcm28155-ap 0 min 23.2 sec: PASS
sunxi_defconfig
---------------
sun7i-a20-cubieboard2 0 min 13.1 sec: PASS
sun4i-a10-cubieboard 0 min 17.4 sec: PASS
exynos_defconfig
----------------
exynos5250-arndale 0 min 30.7 sec: PASS
multi_v7_defconfig
------------------
ste-snowball 1 min 20.5 sec: PASS
tegra30-beaver 0 min 16.6 sec: PASS
am335x-boneblack 0 min 23.6 sec: PASS
omap3-beagle-xm 0 min 45.9 sec: PASS
sun7i-a20-cubieboard2 0 min 14.4 sec: PASS
armada-370-mirabox 0 min 24.3 sec: PASS
omap4-panda 0 min 51.9 sec: PASS
armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS
sun4i-a10-cubieboard 0 min 22.1 sec: PASS
bcm28155-ap 0 min 27.6 sec: PASS
omap3-overo-tobi 0 min 24.7 sec: PASS (Warnings: 1)
imx6dl-wandboard,wand-solo 0 min 17.9 sec: PASS
am335x-bone 0 min 26.2 sec: PASS
omap3-overo-storm-tobi 0 min 23.9 sec: PASS
omap5-uevm 1 min 43.1 sec: PASS (Warnings: 1)
imx6q-wandboard 0 min 17.2 sec: PASS
omap4-panda-es 0 min 53.3 sec: PASS
imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS
u8500_defconfig
---------------
ste-snowball 0 min 30.6 sec: PASS
sama5_defconfig
---------------
sama5d35ek 1 min 43.3 sec: FAIL
davinci_all_defconfig
---------------------
legacy,dm365evm 0 min 17.1 sec: PASS
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4 0 min 21.9 sec: PASS
armada-370-mirabox 0 min 20.1 sec: PASS
Console logs for failures
=========================
sama5_defconfig
---------------
sama5d35ek: FAIL: last 80 lines of boot log:
--------------------------------------------
atmel-ehci 700000.ehci: irq 51, io mem 0x00700000
atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.0+ ehci_hcd
usb usb1: SerialNumber: 700000.ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-atmel: OHCI Atmel driver
at91_ohci 600000.ohci: OHCI Host Controller
at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2
at91_ohci 600000.ohci: irq 51, io mem 0x00600000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.0+ ohci_hcd
usb usb2: SerialNumber: at91
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
atmel_usba_udc 500000.gadget: MMIO registers at 0xf8030000 mapped at e08a8000
atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at e2200000
g_serial gadget: Gadget Serial v2.4
g_serial gadget: g_serial ready
at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0
at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
i2c /dev entries driver
atmel_aes f8038000.aes: version: 0x135
atmel_aes f8038000.aes: Atmel AES - Using dma1chan0, dma1chan1 for DMA transfers
atmel_sha f8034000.sha: version: 0x410
atmel_sha f8034000.sha: using dma1chan2 for DMA transfers
atmel_sha f8034000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512
atmel_tdes f803c000.tdes: version: 0x701
atmel_tdes f803c000.tdes: using dma1chan3, dma1chan4 for DMA transfers
atmel_tdes f803c000.tdes: Atmel DES/TDES
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
iio iio:device0: Resolution used: 12 bits
iio iio:device0: not support touchscreen in the adc compatible string.
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
input: gpio_keys.6 as /devices/gpio_keys.6/input/input0
at91_rtc fffffeb0.rtc: setting system clock to 2007-01-01 00:00:10 UTC (1167609610)
atmel_mci f0000000.mmc: version: 0x505
atmel_mci f0000000.mmc: using dma0chan4 for DMA transfers
atmel_mci f0000000.mmc: Atmel MCI controller at 0xf0000000 irq 26, 1 slots
atmel_mci f8000000.mmc: version: 0x505
atmel_mci f8000000.mmc: using dma1chan5 for DMA transfers
atmel_mci f8000000.mmc: Atmel MCI controller at 0xf8000000 irq 32, 1 slots
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Waiting up to 110 more seconds for network.
Waiting up to 100 more seconds for network.
Waiting up to 90 more seconds for network.
Waiting up to 80 more seconds for network.
Waiting up to 70 more seconds for network.
Waiting up to 60 more seconds for network.
Waiting up to 50 more seconds for network.
Waiting up to 40 more seconds for network.
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 103.28 seconds.
# PYBOOT: Result: FAIL
Hi Russell,
Please pull fixes for ARM kprobes/uprobes big-endian support.
It is reworked initial Ben's series for big endian support [1].
Dropped patches that are not directly related to probes and rebased
series on top of Dave Long's ARM uprobes series. Current set of
patches is enough to have functional BE kprobes and uprobes.
One ARM kprobe test fails on Cortex-A15 boards (TC2 and Keystone2 EVM),
while it passes on Pandaboard. The issue is not related to this series
and already present since v3.13-rc7.
v1..v2: Rebased series on top of Dave Long's ARM uprobes series.
Now this series fixes both BE kprobes and BE uprobes.
Tested on Pandaboard ES and TI Keystone2 EVM.
pull req v1: http://www.spinics.net/lists/arm-kernel/msg300227.html
[1] http://www.spinics.net/lists/arm-kernel/msg285210.html
--->8
The following changes since commit c7edc9e326d53ca5ef9bed82de0740c6b107d55b:
ARM: add uprobes support (2014-03-18 16:39:40 -0400)
are available in the git repository at:
git://git.linaro.org/people/taras.kondratiuk/linux.git tags/for_russell/arm-be-probes
for you to fetch changes up to 41b5368f31f86a1c2be2bb16a1cf18d23f1223d4:
ARM: kprobes-test: Workaround GAS .align bug (2014-04-01 16:48:27 +0300)
----------------------------------------------------------------
Ben Dooks (4):
ARM: probes: fix instruction fetch order with <asm/opcodes.h>
ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses
ARM: kprobes-test: use <asm/opcodes.h> for ARM instruction building
ARM: kprobes-test: use <asm/opcodes.h> for Thumb instruction building
Taras Kondratiuk (1):
ARM: kprobes-test: Workaround GAS .align bug
arch/arm/kernel/kprobes-common.c | 4 +-
arch/arm/kernel/kprobes-test-arm.c | 603 +++++++++++++++++-----------------
arch/arm/kernel/kprobes-test-thumb.c | 447 ++++++++++++-------------
arch/arm/kernel/kprobes-test.c | 13 +-
arch/arm/kernel/kprobes-test.h | 2 +-
arch/arm/kernel/kprobes-thumb.c | 20 +-
arch/arm/kernel/kprobes.c | 9 +-
arch/arm/kernel/probes.c | 15 +-
8 files changed, 562 insertions(+), 551 deletions(-)
--
Taras Kondratiuk
This patchset reflect the DT changes for thermal framework change on
omap4 board, more specific, on panda ES board. It is used for thermal
framework testing to approve new thermal framework backport is working.
The patchset is on
git://git.linaro.org/kernel/linux-linaro-stable.git thermal-framework-test
Haojian give me lots help to find out missed patches. Thanks a lot!
Any comments are appreciated!
Thanks
Alex
[PATCH 1/7] arm: dts: add omap4 CPU thermal data
[PATCH 2/7] arm: dts: add omap4460 thermal data
[PATCH 3/7] ARM: omap dts syntax error fix
[PATCH 4/7] arm: dts: make OMAP4460 bandgap node to belong to OCP
[PATCH 5/7] ARM: 7758/1: introduce config HAS_BANDGAP
[PATCH 6/7] arm: dts: add cooling properties on omap4460 cpu node
[PATCH 7/7] thermal: ti-soc-thermal: use standard GPIO DT bindings