linaro-kernel

linaro-kernel@lists.linaro.org

10095 discussions

mainline boot: 64 boots: 63 pass, 1 fail (v3.16-rc1-112-g894e552)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1-112-g894e552 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.8 sec: PASS da850-evm 0 min 15.7 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.0 sec: PASS tegra30-beaver 0 min 24.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 18.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS omap5-uevm 1 min 42.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.2 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.3 sec: PASS armada-370-mirabox 0 min 26.0 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 40.6 sec: PASS am335x-boneblack 0 min 22.7 sec: PASS omap3-beagle-xm 0 min 48.6 sec: PASS legacy,3530beagle 0 min 27.6 sec: PASS (Warnings: 1) omap4-panda 0 min 57.1 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.4 sec: PASS am335x-bone 0 min 24.5 sec: PASS omap3-overo-storm-tobi 0 min 25.4 sec: PASS omap5-uevm 0 min 56.3 sec: PASS (Warnings: 1) omap3-n900 0 min 18.1 sec: PASS legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.7 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS sun7i-a20-cubieboard2 0 min 13.2 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 29.1 sec: PASS am335x-bone 0 min 24.2 sec: PASS tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS omap4-panda 0 min 51.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS ste-snowball 1 min 12.0 sec: PASS tegra30-beaver 0 min 22.1 sec: PASS omap3-n900 0 min 20.1 sec: PASS qcom-apq8074-dragonboard 0 min 25.6 sec: PASS bcm28155-ap 0 min 27.4 sec: PASS omap3-overo-tobi 0 min 26.4 sec: PASS omap3-overo-storm-tobi 0 min 25.7 sec: PASS omap3-beagle-xm 0 min 56.5 sec: PASS exynos5420-arndale-octa 0 min 40.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.2 sec: PASS omap5-uevm 1 min 39.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 57.3 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 36.8 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 12.0 sec: PASS sun4i-a10-cubieboard 0 min 14.8 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.7 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.9 sec: PASS exynos5250-arndale 0 min 30.1 sec: PASS exynos5410-smdk5410 0 min 27.6 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 16.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.1 sec: PASS imx6q-wandboard 0 min 14.3 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.6 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.4 sec: PASS armada-370-mirabox 0 min 23.1 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.8 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.493377] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.501251] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.509155] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.521087] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.528381] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.539886] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.548431] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.560363] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.567687] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.579162] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.586975] HS USB OTG: no transceiver configured [ 3.591705] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.599548] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.607452] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.619384] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.626708] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.638183] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.646728] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.658630] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.665954] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677429] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.685272] HS USB OTG: no transceiver configured [ 3.689971] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.697814] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.705749] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.717681] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.725006] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736480] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.744995] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.756927] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.764251] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775726] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.783538] HS USB OTG: no transceiver configured [ 3.788238] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.796112] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.804016] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.62 seconds. # PYBOOT: Result: FAIL

11 years

mainline boot: 64 boots: 63 pass, 1 fail (v3.16-rc1-110-g3d09c62)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1-110-g3d09c62 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.3 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS omap5-uevm 1 min 39.3 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 38.5 sec: PASS am335x-boneblack 0 min 22.3 sec: PASS omap3-beagle-xm 0 min 53.5 sec: PASS legacy,3530beagle 0 min 23.4 sec: PASS (Warnings: 1) omap4-panda 0 min 53.0 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.9 sec: PASS am335x-bone 0 min 24.0 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 53.0 sec: PASS (Warnings: 1) omap3-n900 0 min 17.4 sec: PASS legacy,n900 0 min 16.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.9 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 22.0 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 28.7 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 0 min 56.4 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 14.5 sec: PASS tegra30-beaver 0 min 21.4 sec: PASS omap3-n900 0 min 16.2 sec: PASS qcom-apq8074-dragonboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 25.6 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap3-beagle-xm 0 min 48.0 sec: PASS exynos5420-arndale-octa 0 min 39.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 39.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.3 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.9 sec: PASS sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.0 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.2 sec: PASS exynos5250-arndale 0 min 30.3 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.7 sec: PASS imx6q-wandboard 0 min 26.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.9 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.0 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 25.6 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.513092] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.521057] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.532989] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.540283] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.551757] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.560363] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.572296] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.579589] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.591064] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.598876] HS USB OTG: no transceiver configured [ 3.603607] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.611450] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.619384] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.631286] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.638610] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.650085] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.658660] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.670593] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.677917] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.689392] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.697204] HS USB OTG: no transceiver configured [ 3.701934] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.709777] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.717712] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.729644] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.736968] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.748443] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.757049] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.768951] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.776275] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.787780] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.795593] HS USB OTG: no transceiver configured [ 3.800292] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.808135] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.816101] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.828033] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.90 seconds. # PYBOOT: Result: FAIL

11 years

next boot: 64 boots: 62 pass, 2 fail (next-20140619)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140619 Failed boot tests (console logs at the end) =========================================== exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.0 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.8 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.3 sec: PASS omap5-uevm 1 min 42.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.2 sec: PASS (Warnings: 1) arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.8 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 38.2 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 50.4 sec: PASS legacy,3530beagle 0 min 28.9 sec: PASS (Warnings: 1) omap4-panda 0 min 53.6 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.1 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap5-uevm 0 min 58.7 sec: PASS (Warnings: 1) omap3-n900 0 min 17.4 sec: PASS legacy,n900 0 min 17.4 sec: PASS (Warnings: 2) omap4-panda-es 0 min 53.4 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.5 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS (Warnings: 1) am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 20.5 sec: PASS exynos5410-smdk5410 0 min 29.1 sec: PASS (Warnings: 3) am335x-bone 0 min 28.6 sec: PASS tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 54.4 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 11.7 sec: PASS tegra30-beaver 0 min 19.7 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 18.7 sec: PASS bcm28155-ap 0 min 27.4 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 54.3 sec: PASS exynos5420-arndale-octa 0 min 43.1 sec: PASS (Warnings: 7) armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 41.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.9 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 30.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.4 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.7 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.4 sec: FAIL (Warnings: 7) exynos5250-arndale 0 min 30.2 sec: PASS exynos5410-smdk5410 0 min 27.7 sec: PASS (Warnings: 3) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 23.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 1 min 46.0 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 17.201588] mmcblk0: p1 p2 p3 p4 [ 17.204756] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00bc088 [ 17.212294] Internal error: : 8 [#2] PREEMPT SMP ARM [ 17.217231] Modules linked in: [ 17.220267] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D W 3.16.0-rc1-next-20140619 #1 [ 17.229111] Workqueue: kmmcd mmc_rescan [ 17.232917] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 17.238295] PC is at rescan_partitions+0xb4/0x290 [ 17.242969] LR is at 0xf00bc000 [ 17.246089] pc : [<c01b0648>] lr : [<f00bc000>] psr: 20000113 [ 17.246089] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 17.257526] r10: 00000000 r9 : ed582400 r8 : ed4cc200 [ 17.262725] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 17.269223] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 17.275724] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 17.283002] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 17.288721] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 17.295047] Stack: (0xef0b5c80 to 0xef0b6000) [ 17.299382] 5c80: c054b37c 00000001 ef0b4000 c038b250 00000001 c0526578 ed717598 c0526448 [ 17.307528] 5ca0: eec24380 ed717468 eec24330 eec24280 00000000 ed717468 00000000 00000000 [ 17.315673] 5cc0: 00000000 eec24280 ed4cc200 eec24290 00000001 00000000 00000000 c00e3e04 [ 17.323818] 5ce0: c00e2804 00000000 00000000 00000001 eec24280 00000000 ed4cc270 ed4cc20c [ 17.331964] 5d00: 00000000 ed717380 00000003 c00e4068 c0528794 00000001 00000003 c038c6f0 [ 17.340109] 5d20: c0528794 c00e2d7c ef0b5d34 c0223228 ed4cc240 00000001 eec24280 ed4cc200 [ 17.348254] 5d40: ed4cc270 ed4cc20c 00000000 ed717380 00000003 c01ae560 c01ad3ac ed4cc200 [ 17.356400] 5d60: 00000080 0b300000 00000002 ef19e400 ef19d800 ef198800 ef198800 ef198abc [ 17.364546] 5d80: c02bccb4 ef19d800 ef198800 ef19d988 ef0b5dd6 c02bdbb8 00000056 ef19d86c [ 17.372691] 5da0: 00000003 ef19e400 ef19d800 c02be7e8 00000003 ef0b5dd6 00000008 ed5a0000 [ 17.380837] 5dc0: c046a178 ef198a98 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 17.388981] 5de0: 00000001 ef19d808 c058d0a8 00000000 c054b304 00000001 00000000 c054afb0 [ 17.397127] 5e00: ef013c00 c02b30fc c02b30e4 c0226ccc 00000000 ef19d808 c0226e7c ef19cc08 [ 17.405273] 5e20: 00000000 c02254a8 ef319698 ed555c44 ef19d808 ef19d83c c054aed0 c0226ba8 [ 17.413419] 5e40: ef19d808 ef19d808 c054aed0 c0226318 ef19d808 00000000 ef19d810 c0224980 [ 17.421564] 5e60: ef013c00 c03851c4 c047cddc ef0b5e84 00061a80 ef19d800 ef19d808 c047cd88 [ 17.429710] 5e80: 00061a80 c03b580c 00000000 c02b351c c047cd88 c045488c c047cd44 00000001 [ 17.437855] 5ea0: ef19cc00 00000000 ef19cc00 c02b5f84 00061a80 40ff8080 00000000 ef19cde~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.42 seconds. # PYBOOT: Warnings: 7 # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503814] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511688] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519592] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531524] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538818] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550292] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558837] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570770] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.578063] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589569] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597381] HS USB OTG: no transceiver configured [ 3.602081] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609924] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617858] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629791] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.637115] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648590] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.657104] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.669036] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676361] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687835] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695678] HS USB OTG: no transceiver configured [ 3.700378] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.708221] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.716156] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.728088] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735412] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746887] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755432] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.767333] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774658] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.786132] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793975] HS USB OTG: no transceiver configured [ 3.798675] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806518] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814453] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.52 seconds. # PYBOOT: Result: FAIL

11 years

next boot: 64 boots: 59 pass, 5 fail (next-20140618)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140618 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ste-snowball: FAIL: arm-u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y armada-370-mirabox: FAIL: arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 14.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS omap5-uevm 1 min 37.5 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.1 sec: PASS (Warnings: 1) arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 21.9 sec: FAIL armada-370-mirabox 0 min 19.1 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 39.7 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS omap3-beagle-xm 0 min 50.4 sec: PASS legacy,3530beagle 0 min 27.7 sec: PASS (Warnings: 1) omap4-panda 0 min 53.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.6 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 58.1 sec: PASS (Warnings: 1) omap3-n900 0 min 16.8 sec: PASS legacy,n900 0 min 16.9 sec: PASS (Warnings: 2) omap4-panda-es 0 min 49.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS (Warnings: 1) am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 13.1 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 30.7 sec: PASS (Warnings: 3) am335x-bone 0 min 23.6 sec: PASS tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.4 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS ste-snowball 1 min 11.4 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 19.6 sec: PASS bcm28155-ap 0 min 26.3 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS omap3-overo-storm-tobi 0 min 25.9 sec: PASS omap3-beagle-xm 0 min 50.1 sec: PASS exynos5420-arndale-octa 0 min 41.3 sec: PASS (Warnings: 7) armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS omap5-uevm 1 min 41.7 sec: PASS (Warnings: 1) omap4-panda-es 0 min 48.8 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 37.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.9 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 11.4 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.4 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: PASS (Warnings: 7) exynos5250-arndale 0 min 30.3 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS (Warnings: 3) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.6 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: FAIL armada-370-mirabox 0 min 19.4 sec: FAIL arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ hub 2-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) rtc-mv d0010300.rtc: internal RTC not ticking request_module: runaway loop modprobe binfmt-4c46 rtc-s35390a 1-0030: rtc core: registered rtc-s35390a as rtc0 orion_wdt: Initial timeout 171 sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver of-flash f0000000.nor: do_map_probe() failed TCP: cubic registered input: soc:internal-regs:gpio_keys as /devices/soc/soc:internal-regs/soc:internal-regs:gpio_keys/input/input0 rtc-s35390a 1-0030: setting system clock to 2014-06-18 06:10:56 UTC (1403071856) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0584000 - c05ba000) Failed to execute /init (error -8) Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-next-20140618 #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c0427790>] (dump_stack+0x74/0x90) [<c0427790>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xee87dfa8 to 0xee87dff0) dfa0: eefe03d8 00000000 00000cd0 00000000 ee87c000 c05c449c dfc0: c042ed88 c05f9e55 c05f9e55 562f5842 00000001 00000000 00000000 ee87dff0 dfe0: c000f168 c004eaf8 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004eaf8>] (cpu_startup_entry+0xe8/0x140) [<c004eaf8>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 21.91 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- orion-ehci d0051000.usb: EHCI Host Controller orion-ehci d0051000.usb: new USB bus registered, assigned bus number 2 orion-ehci d0051000.usb: irq 26, io mem 0xd0051000 orion-ehci d0051000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 request_module: runaway loop modprobe binfmt-4c46 orion_wdt: Initial timeout 229 sec usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered rtc-mv d0010300.rtc: setting system clock to 2014-06-17 11:54:10 UTC (1403006050) ALSA device list: No soundcards found. Freeing unused kernel memory: 216K (c0584000 - c05ba000) request_module: runaway loop modprobe binfmt-4c46 Failed to execute /init (error -8) mmc0: new high speed SDIO card at address 0001 mwifiex_sdio mmc0:0001:1: Direct firmware load failed with error -2 mwifiex_sdio mmc0:0001:1: Falling back to user helper Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 19.09 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503540] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511413] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519317] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531219] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538543] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550018] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558563] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570495] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577819] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589294] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597106] HS USB OTG: no transceiver configured [ 3.601837] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609680] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617584] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629516] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636840] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648315] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656829] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668762] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676086] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687561] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695404] HS USB OTG: no transceiver configured [ 3.700103] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707946] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715881] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727783] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735107] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746582] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755096] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.767028] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774353] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785827] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793670] HS USB OTG: no transceiver configured [ 3.798370] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806213] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814147] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.57 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 2.517500] NET: Registered protocol family 29 [ 2.521973] can: raw protocol (rev 20120528) [ 2.526266] can: broadcast manager protocol (rev 20120528 t) [ 2.531958] can: netlink gateway (rev 20130117) max_hops=1 [ 2.537714] Key type dns_resolver registered [ 2.542068] ThumbEE CPU extension supported. [ 2.546371] Registering SWP/SWPB emulation handler [ 2.552088] input: soc:internal-regs:gpio_keys as /devices/soc/soc:internal-regs/soc:internal-regs:gpio_keys/input/input0 [ 2.563269] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.570754] ALSA device list: [ 2.573730] No soundcards found. [ 2.577857] Freeing unused kernel memory: 660K (c0acb000 - c0b70000) [ 2.600397] Failed to execute /init (error -8) [ 2.613426] Starting init: /sbin/init exists but couldn't execute it (error -8) [ 2.629145] Starting init: /bin/sh exists but couldn't execute it (error -8) [ 2.636367] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 2.649530] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-next-20140618 #1 [ 2.657054] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 2.664824] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 2.672068] [<c080659c>] (dump_stack) from [<c08040f4>] (panic+0x90/0x21c) [ 2.678969] [<c08040f4>] (panic) from [<c0801e6c>] (kernel_init+0xc8/0xec) [ 2.685865] [<c0801e6c>] (kernel_init) from [<c020e9b8>] (ret_from_fork+0x14/0x3c) [ 2.693457] CPU1: stopping [ 2.696175] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.16.0-rc1-next-20140618 #1 [ 2.703685] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 2.711453] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 2.718696] [<c080659c>] (dump_stack) from [<c021429c>] (handle_IPI+0x138/0x174) [ 2.726113] [<c021429c>] (handle_IPI) from [<c02087f0>] (armada_370_xp_handle_irq+0xb0/0xcc) [ 2.734575] [<c02087f0>] (armada_370_xp_handle_irq) from [<c0212100>] (__irq_svc+0x40/0x50) [ 2.742946] Exception stack(0xea079f98 to 0xea079fe0) [ 2.748010] 9f80: ffffffed 00000000 [ 2.756209] 9fa0: ffffffed 00000000 c0b7a4c4 c0b7a458 00000000 00000000 c0b6eda8 0000004c [ 2.764409] 9fc0: 00000000 ea078000 00000000 ea079fe0 c020f4e4 c027b13c 60000313 ffffffff [ 2.772613] [<c0212100>] (__irq_svc) from [<c027b13c>] (cpu_startup_entry+0x1c8/0x208) [ 2.780553] [<c027b13c>] (cpu_startup_entry) from [<00208ac8>] (0x208ac8) [ 2.787362] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 23.61 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- [ 1.433806] orion_wdt: Initial timeout 229 sec [ 1.439113] sdhci: Secure Digital Host Controller Interface driver [ 1.445321] sdhci: Copyright(c) Pierre Ossman [ 1.477964] Synopsys Designware Multimedia Card Interface Driver [ 1.484374] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.490671] usbcore: registered new interface driver usbhid [ 1.496272] usbhid: USB HID core driver [ 1.502985] TCP: cubic registered [ 1.506320] NET: Registered protocol family 17 [ 1.510802] can: controller area network core (rev 20120528 abi 9) [ 1.517075] NET: Registered protocol family 29 [ 1.521555] can: raw protocol (rev 20120528) [ 1.525854] can: broadcast manager protocol (rev 20120528 t) [ 1.531542] can: netlink gateway (rev 20130117) max_hops=1 [ 1.537362] Key type dns_resolver registered [ 1.541735] ThumbEE CPU extension supported. [ 1.546038] Registering SWP/SWPB emulation handler [ 1.551881] rtc-mv d0010300.rtc: setting system clock to 2014-06-17 11:52:47 UTC (1403005967) [ 1.561071] ALSA device list: [ 1.564063] No soundcards found. [ 1.568278] Freeing unused kernel memory: 660K (c0acb000 - c0b70000) [ 1.585201] request_module: runaway loop modprobe binfmt-4c46 [ 1.601312] request_module: runaway loop modprobe binfmt-4c46 [ 1.607364] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 1.616761] Failed to execute /init (error -8) [ 1.629760] mmc0: new high speed SDIO card at address 0001 [ 1.639521] Starting init: /sbin/init exists but couldn't execute it (error -8) [ 1.656623] Starting init: /bin/sh exists but couldn't execute it (error -8) [ 1.663757] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 1.676910] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0-rc1-next-20140618 #1 [ 1.684436] [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [ 1.692203] [<c021160c>] (show_stack) from [<c080659c>] (dump_stack+0x78/0x94) [ 1.699442] [<c080659c>] (dump_stack) from [<c08040f4>] (panic+0x90/0x21c) [ 1.706342] [<c08040f4>] (panic) from [<c0801e6c>] (kernel_init+0xc8/0xec) [ 1.713234] [<c0801e6c>] (kernel_init) from [<c020e9b8>] (ret_from_fork+0x14/0x3c) [ 1.720822] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 19.42 seconds. # PYBOOT: Result: FAIL

11 years

[PATCH 0/3] hrtimer: Fix missing dynticks kick

by Viresh Kumar

Hi, In lowres mode, hrtimers are serviced by the tick. But when a hrtimer is enqueued on a idle or full dynticks target, we need to kick it in order to make it reconsider the next tick to schedule, to correctly handle the hrtimer's expiring time. Now while this kick is correctly performed for periodic timers, hrtimers were a bit neglected. get_nohz_timer_target() doesn't return a remote idle target but there is a small race window here. The elected target has all the time to turn dynticks idle between the call to get_nohz_timer_target() and the locking of its base. Hence a risk that we enqueue a hrtimer on a dynticks idle destination without kicking it. As a result, the hrtimer might be serviced too late in the future. Also a target elected by get_nohz_timer_target() can be in full dynticks mode and thus require to be kicked as well. And unlike idle dynticks, this concern both local and remote targets. This patchset should fix all these issues. git://git.linaro.org/people/viresh.kumar/linux.git missing-kick Similar problems with timers were fixed and sent to LKML earlier: https://lkml.org/lkml/2014/6/12/588 (Yeah, I stole logs from there :) ) Viresh Kumar (3): hrtimer: Store cpu-number in 'struct hrtimer_cpu_base' hrtimer: Kick lowres dynticks targets on hrtimer_start*() calls hrtimers: don't check hres_active before calling hrtimer_reprogram() include/linux/hrtimer.h | 2 ++ kernel/hrtimer.c | 49 +++++++++++++++++++++++++++---------------------- 2 files changed, 29 insertions(+), 22 deletions(-) -- 2.0.0.rc2

11 years

mainline boot: 64 boots: 62 pass, 2 fail (v3.16-rc1-17-ge99cfa2)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1-17-ge99cfa2 Failed boot tests (console logs at the end) =========================================== exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.0 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 17.5 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 38.6 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS armada-370-mirabox 0 min 20.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 44.2 sec: PASS am335x-boneblack 0 min 22.3 sec: PASS omap3-beagle-xm 0 min 48.2 sec: PASS legacy,3530beagle 0 min 25.5 sec: PASS (Warnings: 1) omap4-panda 0 min 53.0 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.3 sec: PASS am335x-bone 0 min 23.9 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 0 min 57.0 sec: PASS (Warnings: 1) omap3-n900 0 min 17.3 sec: PASS legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 51.7 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.9 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.6 sec: PASS sun4i-a10-cubieboard 0 min 17.4 sec: PASS exynos5410-smdk5410 0 min 29.4 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-370-mirabox 0 min 21.9 sec: PASS omap4-panda 0 min 56.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 14.8 sec: PASS ste-snowball 1 min 11.6 sec: PASS tegra30-beaver 0 min 19.7 sec: PASS omap3-n900 0 min 16.0 sec: PASS qcom-apq8074-dragonboard 0 min 19.4 sec: PASS bcm28155-ap 0 min 26.7 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS omap3-overo-storm-tobi 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 51.4 sec: PASS exynos5420-arndale-octa 0 min 40.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS omap5-uevm 1 min 40.9 sec: PASS (Warnings: 1) omap4-panda-es 0 min 56.0 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.4 sec: PASS sun4i-a10-cubieboard 0 min 11.5 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.4 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.6 sec: FAIL exynos5250-arndale 0 min 29.7 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS imx6q-wandboard 0 min 14.0 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.8 sec: PASS armada-370-mirabox 0 min 23.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.246636] of_get_named_gpiod_flags exited with status 0 [ 16.250762] mmcblk0: p1 p2 p3 p4 [ 16.253931] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.261468] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.266404] Modules linked in: [ 16.269441] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.16.0-rc1-00017-ge99cfa2 #1 [ 16.278371] Workqueue: kmmcd mmc_rescan [ 16.282177] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.287554] PC is at rescan_partitions+0xb4/0x290 [ 16.292228] LR is at 0xf00b8000 [ 16.295350] pc : [<c01afea8>] lr : [<f00b8000>] psr: 20000113 [ 16.295350] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 16.306786] r10: 00000000 r9 : ef354040 r8 : ed687200 [ 16.311986] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.318485] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.324984] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.332264] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.337982] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.344308] Stack: (0xef0b5c80 to 0xef0b6000) [ 16.348644] 5c80: c0548484 00000001 ef0b4000 c03890b8 00000001 c05245b8 ed597598 c0524488 [ 16.356789] 5ca0: eec24380 ed597468 eec24330 eec24280 00000000 ed597468 00000000 00000000 [ 16.364933] 5cc0: 00000000 eec24280 ed687200 eec24290 00000001 00000000 00000000 c00e3ae0 [ 16.373079] 5ce0: c00e24e0 00000000 00000000 00000001 eec24280 00000000 ed687270 ed68720c [ 16.381224] 5d00: 00000000 ed597380 00000003 c00e3d44 c0526794 00000001 00000003 c038a538 [ 16.389370] 5d20: c0526794 c00e2a58 ef0b5d34 c0222584 ed687240 00000001 eec24280 ed687200 [ 16.397515] 5d40: ed687270 ed68720c 00000000 ed597380 00000003 c01addc0 c01acc14 ed687200 [ 16.405662] 5d60: 00000080 0b300000 00000002 ed698c00 ed69c000 ed699400 ed699400 ed6996bc [ 16.413807] 5d80: c02bb9f4 ed69c000 ed699400 ed69c188 ef0b5dd6 c02bc8f8 00000056 ed69c06c [ 16.421952] 5da0: 00000003 ed698c00 ed69c000 c02bd528 00000003 ef0b5dd6 00000008 ed696708 [ 16.430097] 5dc0: c04673bc ed699698 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.438243] 5de0: 00000001 ed69c008 c058a11c 00000000 c054840c 00000001 00000000 c05480b8 [ 16.446389] 5e00: ef013c00 c02b1e78 c02b1e60 c0226028 00000000 ed69c008 c02261d8 ed699008 [ 16.454533] 5e20: 00000000 c0224804 ef335698 ef207f44 ed69c008 ed69c03c c0547fd8 c0225f04 [ 16.462679] 5e40: ed69c008 ed69c008 c0547fd8 c0225674 ed69c008 00000000 ed69c010 c0223cdc [ 16.470825] 5e60: ef013c00 c0383030 c0479de4 ef0b5e84 00061a80 ed69c000 ed69c008 c0479d90 [ 16.478971] 5e80: 00061a80 c03b3794 00000000 c02b2298 c0479d90 c0451bc0 c0479d4c 00000001 [ 16.487116] 5ea0: ed699000 00000000 ed699000 c02b4ce4 00061a80 40ff8080 0000000~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.64 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503356] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511199] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519104] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531036] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538330] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.549835] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558349] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570281] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577606] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589080] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.596893] HS USB OTG: no transceiver configured [ 3.601623] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609466] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617370] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629302] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636627] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648101] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656616] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668548] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.675872] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687347] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695159] HS USB OTG: no transceiver configured [ 3.699859] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707733] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715667] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727569] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.734893] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746398] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.754913] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.766845] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774139] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785644] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793457] HS USB OTG: no transceiver configured [ 3.798156] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.805999] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.813934] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.50 seconds. # PYBOOT: Result: FAIL

11 years

[PATCH 3.13 108/212] hrtimer: Set expiry time before switch_hrtimer_base()

by Kamal Mostafa

3.13.11.4 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Viresh Kumar <viresh.kumar(a)linaro.org> commit 84ea7fe37908254c3bd90910921f6e1045c1747a upstream. switch_hrtimer_base() calls hrtimer_check_target() which ensures that we do not migrate a timer to a remote cpu if the timer expires before the current programmed expiry time on that remote cpu. But __hrtimer_start_range_ns() calls switch_hrtimer_base() before the new expiry time is set. So the sanity check in hrtimer_check_target() is operating on stale or even uninitialized data. Update expiry time before calling switch_hrtimer_base(). [ tglx: Rewrote changelog once again ] Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Cc: linaro-kernel(a)lists.linaro.org Cc: linaro-networking(a)linaro.org Cc: fweisbec(a)gmail.com Cc: arvind.chauhan(a)arm.com Link: http://lkml.kernel.org/r/81999e148745fc51bbcd0615823fbab9b2e87e23.139988225… Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Kamal Mostafa <kamal(a)canonical.com> --- kernel/hrtimer.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 6de65d8..aa14922 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1002,11 +1002,8 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, /* Remove an active timer from the queue: */ ret = remove_hrtimer(timer, base); - /* Switch the timer base, if necessary: */ - new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED); - if (mode & HRTIMER_MODE_REL) { - tim = ktime_add_safe(tim, new_base->get_time()); + tim = ktime_add_safe(tim, base->get_time()); /* * CONFIG_TIME_LOW_RES is a temporary way for architectures * to signal that they simply return xtime in @@ -1021,6 +1018,9 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, hrtimer_set_expires_range_ns(timer, tim, delta_ns); + /* Switch the timer base, if necessary: */ + new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED); + timer_stats_hrtimer_set_start_info(timer); leftmost = enqueue_hrtimer(timer, new_base); -- 1.9.1

11 years

[3.13.y.z extended stable] Patch "hrtimer: Set expiry time before switch_hrtimer_base()" has been added to staging queue

by Kamal Mostafa

This is a note to let you know that I have just added a patch titled hrtimer: Set expiry time before switch_hrtimer_base() to the linux-3.13.y-queue branch of the 3.13.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/lin… This patch is scheduled to be released in version 3.13.11.4. If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.13.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Kamal ------ >From 314b53cb66cf64991bc729b453bf5521baa952df Mon Sep 17 00:00:00 2001 From: Viresh Kumar <viresh.kumar(a)linaro.org> Date: Mon, 12 May 2014 13:42:29 +0530 Subject: hrtimer: Set expiry time before switch_hrtimer_base() commit 84ea7fe37908254c3bd90910921f6e1045c1747a upstream. switch_hrtimer_base() calls hrtimer_check_target() which ensures that we do not migrate a timer to a remote cpu if the timer expires before the current programmed expiry time on that remote cpu. But __hrtimer_start_range_ns() calls switch_hrtimer_base() before the new expiry time is set. So the sanity check in hrtimer_check_target() is operating on stale or even uninitialized data. Update expiry time before calling switch_hrtimer_base(). [ tglx: Rewrote changelog once again ] Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Cc: linaro-kernel(a)lists.linaro.org Cc: linaro-networking(a)linaro.org Cc: fweisbec(a)gmail.com Cc: arvind.chauhan(a)arm.com Link: http://lkml.kernel.org/r/81999e148745fc51bbcd0615823fbab9b2e87e23.139988225… Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Kamal Mostafa <kamal(a)canonical.com> --- kernel/hrtimer.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 6de65d8..aa14922 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1002,11 +1002,8 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, /* Remove an active timer from the queue: */ ret = remove_hrtimer(timer, base); - /* Switch the timer base, if necessary: */ - new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED); - if (mode & HRTIMER_MODE_REL) { - tim = ktime_add_safe(tim, new_base->get_time()); + tim = ktime_add_safe(tim, base->get_time()); /* * CONFIG_TIME_LOW_RES is a temporary way for architectures * to signal that they simply return xtime in @@ -1021,6 +1018,9 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, hrtimer_set_expires_range_ns(timer, tim, delta_ns); + /* Switch the timer base, if necessary: */ + new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED); + timer_stats_hrtimer_set_start_info(timer); leftmost = enqueue_hrtimer(timer, new_base); -- 1.9.1

11 years

next boot: 64 boots: 63 pass, 1 fail (next-20140617)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140617 Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.0 sec: PASS da850-evm 0 min 14.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.8 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.1 sec: PASS omap5-uevm 1 min 42.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS (Warnings: 1) arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.4 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS omap3-beagle-xm 0 min 45.3 sec: PASS legacy,3530beagle 0 min 27.4 sec: PASS (Warnings: 1) omap4-panda 0 min 54.2 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 22.7 sec: PASS am335x-bone 0 min 24.0 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 0 min 52.4 sec: PASS (Warnings: 1) omap3-n900 0 min 16.7 sec: PASS legacy,n900 0 min 16.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.6 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.8 sec: PASS legacy,3530overo 0 min 20.9 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.7 sec: PASS (Warnings: 1) am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 13.1 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 32.2 sec: PASS (Warnings: 3) am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-370-mirabox 0 min 21.9 sec: PASS omap4-panda 0 min 52.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.1 sec: PASS ste-snowball 1 min 11.5 sec: PASS tegra30-beaver 0 min 21.3 sec: PASS omap3-n900 0 min 16.5 sec: PASS qcom-apq8074-dragonboard 0 min 18.6 sec: PASS bcm28155-ap 0 min 24.9 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 50.2 sec: PASS exynos5420-arndale-octa 0 min 42.2 sec: PASS (Warnings: 7) armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS omap5-uevm 1 min 44.4 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.8 sec: PASS (Warnings: 1) sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.5 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.2 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 40.6 sec: PASS (Warnings: 7) exynos5250-arndale 0 min 29.6 sec: PASS exynos5410-smdk5410 0 min 27.6 sec: PASS (Warnings: 3) arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.0 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 50.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.4 sec: PASS armada-370-mirabox 0 min 22.6 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503570] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511413] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519317] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531249] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538543] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550048] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558563] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570495] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577789] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589294] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597106] HS USB OTG: no transceiver configured [ 3.601806] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609649] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617584] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629516] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636810] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648315] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656829] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668731] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676055] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687530] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695373] HS USB OTG: no transceiver configured [ 3.700073] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.707916] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715850] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727783] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735076] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746582] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755096] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.766998] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774322] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785797] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793640] HS USB OTG: no transceiver configured [ 3.798339] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806182] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814117] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.53 seconds. # PYBOOT: Result: FAIL

11 years

mainline boot: 64 boots: 62 pass, 2 fail (v3.16-rc1-1-g68986c9)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.16-rc1-1-g68986c9 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.9 sec: PASS da850-evm 0 min 14.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS tegra30-beaver 0 min 20.8 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.0 sec: PASS omap5-uevm 1 min 40.1 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 13.0 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.4 sec: FAIL armada-370-mirabox 0 min 20.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 35.8 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 44.2 sec: PASS legacy,3530beagle 0 min 22.6 sec: PASS (Warnings: 1) omap4-panda 0 min 49.4 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.3 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 21.1 sec: PASS omap5-uevm 0 min 49.7 sec: PASS (Warnings: 1) omap3-n900 0 min 16.7 sec: PASS legacy,n900 0 min 17.0 sec: PASS (Warnings: 1) omap4-panda-es 0 min 48.6 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.4 sec: PASS legacy,3530overo 0 min 20.9 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 14.8 sec: PASS am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 52.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.1 sec: PASS ste-snowball 1 min 14.7 sec: PASS tegra30-beaver 0 min 17.2 sec: PASS omap3-n900 0 min 16.1 sec: PASS qcom-apq8074-dragonboard 0 min 19.0 sec: PASS bcm28155-ap 0 min 25.5 sec: PASS omap3-overo-tobi 0 min 22.4 sec: PASS omap3-overo-storm-tobi 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 44.6 sec: PASS exynos5420-arndale-octa 0 min 40.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 36.8 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.5 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 32.7 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.3 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.4 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: PASS exynos5250-arndale 0 min 29.7 sec: PASS exynos5410-smdk5410 0 min 27.7 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.5 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.6 sec: PASS armada-370-mirabox 0 min 23.0 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.4 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 55048012 02109471 [<c0186a38>] (_set_bit) from [<c01c9d5c>] (n_tty_set_termios+0x234/0x348) [<c01c9d5c>] (n_tty_set_termios) from [<c01c9f5c>] (n_tty_open+0xec/0x114) [<c01c9f5c>] (n_tty_open) from [<c01cd9b8>] (tty_ldisc_open+0x3c/0x78) [<c01cd9b8>] (tty_ldisc_open) from [<c01ce134>] (tty_ldisc_setup+0x18/0x5c) [<c01ce134>] (tty_ldisc_setup) from [<c01c6da8>] (tty_init_dev+0x94/0x184) [<c01c6da8>] (tty_init_dev) from [<c01c76b4>] (tty_open+0x2d0/0x5a8) [<c01c76b4>] (tty_open) from [<c00af400>] (chrdev_open+0xc4/0x184) [<c00af400>] (chrdev_open) from [<c00a9b24>] (do_dentry_open.isra.12+0x1b0/0x2f0) [<c00a9b24>] (do_dentry_open.isra.12) from [<c00a9d34>] (finish_open+0x20/0x38) [<c00a9d34>] (finish_open) from [<c00b7e08>] (do_last.isra.41+0x5a4/0xb50) [<c00b7e08>] (do_last.isra.41) from [<c00b8468>] (path_openat+0xb4/0x5c8) [<c00b8468>] (path_openat) from [<c00b8c80>] (do_filp_open+0x2c/0x80) [<c00b8c80>] (do_filp_open) from [<c00aac8c>] (do_sys_open+0x110/0x1cc) [<c00aac8c>] (do_sys_open) from [<c0581cb0>] (kernel_init_freeable+0x128/0x1c8) [<c0581cb0>] (kernel_init_freeable) from [<c0422f78>] (kernel_init+0x8/0xec) [<c0422f78>] (kernel_init) from [<c000e638>] (ret_from_fork+0x14/0x3c) Code: 00f091f5 1233a0e1 9f2f91e1 032082e1 (920f81e1) ---[ end trace 712f6fee5e845cf0 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc1-00001-g68986c9 #1 [<c0014b04>] (unwind_backtrace) from [<c0010eb0>] (show_stack+0x10/0x14) [<c0010eb0>] (show_stack) from [<c0425f40>] (dump_stack+0x74/0x90) [<c0425f40>] (dump_stack) from [<c00139dc>] (handle_IPI+0x134/0x170) [<c00139dc>] (handle_IPI) from [<c0008650>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c0008650>] (armada_370_xp_handle_irq) from [<c0011980>] (__irq_svc+0x40/0x50) Exception stack(0xed87dfa8 to 0xed87dff0) dfa0: edfd53d8 00000000 00000d30 00000000 ed87c000 c05c049c dfc0: c042cd88 c05f4fd5 c05f4fd5 562f5842 00000001 00000000 00000000 ed87dff0 dfe0: c000f168 c004eba8 60000313 ffffffff [<c0011980>] (__irq_svc) from [<c004eba8>] (cpu_startup_entry+0xe8/0x140) [<c004eba8>] (cpu_startup_entry) from [<00008768>] (0x8768) ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 23.42 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.502990] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.510955] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.522857] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.530181] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.541656] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.550262] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.562194] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.569488] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.580963] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.588775] HS USB OTG: no transceiver configured [ 3.593505] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.601348] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.609283] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.621215] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.628509] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.639984] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.648590] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.660522] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.667816] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.679321] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.687133] HS USB OTG: no transceiver configured [ 3.691833] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.699676] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.707611] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.719543] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.726867] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.738342] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.746948] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.758850] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.766174] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.777679] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.785491] HS USB OTG: no transceiver configured [ 3.790191] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.798034] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.805999] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.817901] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.46 seconds. # PYBOOT: Result: FAIL

11 years

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel