- linaro-kernel - lists.linaro.org

[PATCH V3] PM / OPP: Use - instead of @ for DT entries

by Viresh Kumar

Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski <krzk(a)kernel.org> Reported-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> Suggested-by: Mark Rutland <mark.rutland(a)arm.com> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Acked-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> (sunxi) Reviewed-by: Chanwoo Choi <cw00.choi(a)samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk(a)kernel.org> Acked-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> (uniphier) Acked-by: Rob Herring <robh(a)kernel.org> Acked-by: Tony Lindgren <tony(a)atomide.com> --- V2->V3: - Rebased over 4.11-rc7 and fixed a merge conflict for sun8i. .../devicetree/bindings/cpufreq/ti-cpufreq.txt | 20 +++---- .../devicetree/bindings/devfreq/exynos-bus.txt | 46 +++++++-------- Documentation/devicetree/bindings/opp/opp.txt | 38 ++++++------- arch/arm/boot/dts/am4372.dtsi | 10 ++-- arch/arm/boot/dts/exynos3250.dtsi | 46 +++++++-------- arch/arm/boot/dts/exynos4210.dtsi | 32 +++++------ arch/arm/boot/dts/exynos4412-prime.dtsi | 4 +- arch/arm/boot/dts/exynos4412.dtsi | 66 +++++++++++----------- arch/arm/boot/dts/exynos5420.dtsi | 40 ++++++------- arch/arm/boot/dts/exynos5800.dtsi | 56 +++++++++--------- arch/arm/boot/dts/pxa25x.dtsi | 8 +-- arch/arm/boot/dts/pxa27x.dtsi | 14 ++--- arch/arm/boot/dts/sun8i-a33.dtsi | 6 +- arch/arm/boot/dts/uniphier-pro5.dtsi | 32 +++++------ arch/arm/boot/dts/uniphier-pxs2.dtsi | 16 +++--- arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 48 ++++++++-------- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 50 ++++++++-------- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 14 ++--- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 32 +++++------ arch/arm64/boot/dts/zte/zx296718.dtsi | 10 ++-- 20 files changed, 294 insertions(+), 294 deletions(-) diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt index ba0e15ad5bd9..0c38e4b8fc51 100644 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -63,64 +63,64 @@ cpu0_opp_table: opp-table { * because they can not be enabled simultaneously on a * single SoC. */ - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0x06 0x0010>; opp-suspend; }; - opp100@275000000 { + opp100-275000000 { opp-hz = /bits/ 64 <275000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0x00FF>; opp-suspend; }; - opp100@300000000 { + opp100-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0020>; opp-suspend; }; - opp100@500000000 { + opp100-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0040>; }; - opp120@600000000 { + opp120-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x06 0x0080>; }; - oppturbo@720000000 { + oppturbo-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x01 0xFFFF>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x06 0x0100>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0x04 0x0200>; diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt index d085ef90d27c..f8e946471a58 100644 --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt @@ -202,23 +202,23 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; @@ -292,23 +292,23 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <900000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; opp-microvolt = <900000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <1000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -318,19 +318,19 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; }; @@ -339,19 +339,19 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; }; }; @@ -360,13 +360,13 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 63725498bd20..e36d261b9ba6 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -186,20 +186,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; clock-latency-ns = <290000>; @@ -265,20 +265,20 @@ independently. * independently. */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000; @@ -341,20 +341,20 @@ DVFS state together. compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000>; @@ -367,20 +367,20 @@ DVFS state together. compatible = "operating-points-v2"; opp-shared; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1050000 1045000 1055000>; opp-microamp = <95000>; clock-latency-ns = <400000>; opp-suspend; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1075000>; opp-microamp = <100000>; clock-latency-ns = <400000>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1100000 1010000 1110000>; opp-microamp = <95000>; @@ -409,7 +409,7 @@ Example 4: Handling multiple regulators compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000>, /* Supply 0 */ <960000>, /* Supply 1 */ @@ -422,7 +422,7 @@ Example 4: Handling multiple regulators /* OR */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>, /* Supply 0 */ <965000 960000 975000>, /* Supply 1 */ @@ -435,7 +435,7 @@ Example 4: Handling multiple regulators /* OR */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>, /* Supply 0 */ <965000 960000 975000>, /* Supply 1 */ @@ -467,7 +467,7 @@ Example 5: opp-supported-hw status = "okay"; opp-shared; - opp@600000000 { + opp-600000000 { /* * Supports all substrate and process versions for 0xF * cuts, i.e. only first four cuts. @@ -478,7 +478,7 @@ Example 5: opp-supported-hw ... }; - opp@800000000 { + opp-800000000 { /* * Supports: * - cuts: only one, 6th cut (represented by 6th bit). @@ -510,7 +510,7 @@ Example 5: opp-supported-hw compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt-slow = <915000 900000 925000>; opp-microvolt-fast = <975000 970000 985000>; @@ -518,7 +518,7 @@ Example 5: opp-supported-hw opp-microamp-fast = <71000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ <925000 910000 935000>; /* Supply vcc1 */ diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 97fcaf415de1..1532ffe1de63 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -60,32 +60,32 @@ cpu0_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0xFF 0x01>; opp-suspend; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0xFF 0x04>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0xFF 0x08>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0xFF 0x10>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0xFF 0x20>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 9c28ef4508e0..590ee442d0ae 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -745,23 +745,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; @@ -835,23 +835,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <900000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; opp-microvolt = <900000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <1000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -861,19 +861,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; }; @@ -882,19 +882,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; }; }; @@ -903,13 +903,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index f9408188f97f..3678d5b44d80 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -335,15 +335,15 @@ compatible = "operating-points-v2"; opp-shared; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1025000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <1050000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1150000>; }; @@ -353,13 +353,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; @@ -368,10 +368,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@5000000 { + opp-5000000 { opp-hz = /bits/ 64 <5000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -380,10 +380,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@10000000 { + opp-10000000 { opp-hz = /bits/ 64 <10000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; }; @@ -392,13 +392,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; }; @@ -407,13 +407,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index e75bc170c89c..a67bd953d754 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -20,12 +20,12 @@ }; &cpu0_opp_table { - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; }; - opp@1704000000 { + opp-1704000000 { opp-hz = /bits/ 64 <1704000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 235bbb69ad7c..ce240d0198b3 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -76,73 +76,73 @@ compatible = "operating-points-v2"; opp-shared; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <925000>; clock-latency-ns = <200000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <950000>; clock-latency-ns = <200000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <975000>; clock-latency-ns = <200000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <987500>; clock-latency-ns = <200000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; clock-latency-ns = <200000>; opp-suspend; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1037500>; clock-latency-ns = <200000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1087500>; clock-latency-ns = <200000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1137500>; clock-latency-ns = <200000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1187500>; clock-latency-ns = <200000>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1250000>; clock-latency-ns = <200000>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1287500>; clock-latency-ns = <200000>; }; - cpu0_opp_1500: opp@1500000000 { + cpu0_opp_1500: opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; @@ -433,23 +433,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <900000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <900000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <900000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <950000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1050000>; }; @@ -459,16 +459,16 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; }; @@ -525,19 +525,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <900000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <925000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <950000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -547,10 +547,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; @@ -559,10 +559,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; }; @@ -571,10 +571,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7dc9dc82afd8..5cd6c7389d51 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -49,62 +49,62 @@ cluster_a15_opp_table: opp_table0 { compatible = "operating-points-v2"; opp-shared; - opp@1800000000 { + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1250000>; clock-latency-ns = <140000>; }; - opp@1700000000 { + opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <1212500>; clock-latency-ns = <140000>; }; - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1175000>; clock-latency-ns = <140000>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1137500>; clock-latency-ns = <140000>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1112500>; clock-latency-ns = <140000>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1062500>; clock-latency-ns = <140000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1037500>; clock-latency-ns = <140000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1012500>; clock-latency-ns = <140000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = < 987500>; clock-latency-ns = <140000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = < 962500>; clock-latency-ns = <140000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = < 937500>; clock-latency-ns = <140000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = < 912500>; clock-latency-ns = <140000>; @@ -114,42 +114,42 @@ cluster_a7_opp_table: opp_table1 { compatible = "operating-points-v2"; opp-shared; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1275000>; clock-latency-ns = <140000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1212500>; clock-latency-ns = <140000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1162500>; clock-latency-ns = <140000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1112500>; clock-latency-ns = <140000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1062500>; clock-latency-ns = <140000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1025000>; clock-latency-ns = <140000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <975000>; clock-latency-ns = <140000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <937500>; clock-latency-ns = <140000>; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index 8213016803e5..9ddb6bacac5a 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -24,60 +24,60 @@ }; &cluster_a15_opp_table { - opp@1700000000 { + opp-1700000000 { opp-microvolt = <1250000>; }; - opp@1600000000 { + opp-1600000000 { opp-microvolt = <1250000>; }; - opp@1500000000 { + opp-1500000000 { opp-microvolt = <1100000>; }; - opp@1400000000 { + opp-1400000000 { opp-microvolt = <1100000>; }; - opp@1300000000 { + opp-1300000000 { opp-microvolt = <1100000>; }; - opp@1200000000 { + opp-1200000000 { opp-microvolt = <1000000>; }; - opp@1100000000 { + opp-1100000000 { opp-microvolt = <1000000>; }; - opp@1000000000 { + opp-1000000000 { opp-microvolt = <1000000>; }; - opp@900000000 { + opp-900000000 { opp-microvolt = <1000000>; }; - opp@800000000 { + opp-800000000 { opp-microvolt = <900000>; }; - opp@700000000 { + opp-700000000 { opp-microvolt = <900000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; @@ -85,46 +85,46 @@ }; &cluster_a7_opp_table { - opp@1300000000 { + opp-1300000000 { opp-microvolt = <1250000>; }; - opp@1200000000 { + opp-1200000000 { opp-microvolt = <1250000>; }; - opp@1100000000 { + opp-1100000000 { opp-microvolt = <1250000>; }; - opp@1000000000 { + opp-1000000000 { opp-microvolt = <1100000>; }; - opp@900000000 { + opp-900000000 { opp-microvolt = <1100000>; }; - opp@800000000 { + opp-800000000 { opp-microvolt = <1100000>; }; - opp@700000000 { + opp-700000000 { opp-microvolt = <1000000>; }; - opp@600000000 { + opp-600000000 { opp-microvolt = <1000000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1000000>; clock-latency-ns = <140000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1000000>; clock-latency-ns = <140000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index f9f4726396a0..95d59be97213 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -93,22 +93,22 @@ pxa250_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@99532800 { + opp-99532800 { opp-hz = /bits/ 64 <99532800>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@199065600 { + opp-199065600 { opp-hz = /bits/ 64 <199065600>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@298598400 { + opp-298598400 { opp-hz = /bits/ 64 <298598400>; opp-microvolt = <1100000 1045000 1650000>; clock-latency-ns = <20>; }; - opp@398131200 { + opp-398131200 { opp-hz = /bits/ 64 <398131200>; opp-microvolt = <1300000 1235000 1650000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index e0fab48ba6fa..5f1d6da02a4c 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -141,37 +141,37 @@ pxa270_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@104000000 { + opp-104000000 { opp-hz = /bits/ 64 <104000000>; opp-microvolt = <900000 900000 1705000>; clock-latency-ns = <20>; }; - opp@156000000 { + opp-156000000 { opp-hz = /bits/ 64 <156000000>; opp-microvolt = <1000000 1000000 1705000>; clock-latency-ns = <20>; }; - opp@208000000 { + opp-208000000 { opp-hz = /bits/ 64 <208000000>; opp-microvolt = <1180000 1180000 1705000>; clock-latency-ns = <20>; }; - opp@312000000 { + opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <1250000 1250000 1705000>; clock-latency-ns = <20>; }; - opp@416000000 { + opp-416000000 { opp-hz = /bits/ 64 <416000000>; opp-microvolt = <1350000 1350000 1705000>; clock-latency-ns = <20>; }; - opp@520000000 { + opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-microvolt = <1450000 1450000 1705000>; clock-latency-ns = <20>; }; - opp@624000000 { + opp-624000000 { opp-hz = /bits/ 64 <624000000>; opp-microvolt = <1550000 1550000 1705000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 306af6cadf26..a2c555d6475c 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -49,19 +49,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@816000000 { + opp-816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1008000000 { + opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000>; clock-latency-ns = <244144>; /* 8 32k periods */ diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index dbc5e5333163..22ef2842be3a 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -77,67 +77,67 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@116667000 { + opp-116667000 { opp-hz = /bits/ 64 <116667000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@175000000 { + opp-175000000 { opp-hz = /bits/ 64 <175000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@233334000 { + opp-233334000 { opp-hz = /bits/ 64 <233334000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@466667000 { + opp-466667000 { opp-hz = /bits/ 64 <466667000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@933334000 { + opp-933334000 { opp-hz = /bits/ 64 <933334000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index e9e031d63c1a..acaaa2187843 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -97,35 +97,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index c42dc39c3223..ec11343dc528 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -94,27 +94,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1075000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <975000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <962500>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <950000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <937500>; }; @@ -123,19 +123,19 @@ bus_g2d_266_opp_table: opp_table3 { compatible = "operating-points-v2"; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -143,13 +143,13 @@ bus_gscl_opp_table: opp_table4 { compatible = "operating-points-v2"; - opp@333000000 { + opp-333000000 { opp-hz = /bits/ 64 <333000000>; }; - opp@222000000 { + opp-222000000 { opp-hz = /bits/ 64 <222000000>; }; - opp@166500000 { + opp-166500000 { opp-hz = /bits/ 64 <166500000>; }; }; @@ -158,22 +158,22 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -181,16 +181,16 @@ bus_noc2_opp_table: opp_table6 { compatible = "operating-points-v2"; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 16072c1c3ed3..727f36abf3d4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -119,43 +119,43 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <900000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <925000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <950000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <975000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1050000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1075000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1112500>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1112500>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1150000>; }; @@ -165,63 +165,63 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <900000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <900000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <912500>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <912500>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <937500>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1012500>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1037500>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1062500>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1087500>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1125000>; }; - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1137500>; }; - opp@1700000000 { + opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <1175000>; }; - opp@1800000000 { + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1212500>; }; - opp@1900000000 { + opp-1900000000 { opp-hz = /bits/ 64 <1900000000>; opp-microvolt = <1262500>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index da881f5b6ed4..0f2bee028ab0 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -89,31 +89,31 @@ compatible = "operating-points-v2"; opp-shared; - opp@245000000 { + opp-245000000 { opp-hz = /bits/ 64 <245000000>; clock-latency-ns = <300>; }; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@490000000 { + opp-490000000 { opp-hz = /bits/ 64 <490000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@653334000 { + opp-653334000 { opp-hz = /bits/ 64 <653334000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@980000000 { + opp-980000000 { opp-hz = /bits/ 64 <980000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index a6b3a70dae83..19f782408d54 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -116,35 +116,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@275000000 { + opp-275000000 { opp-hz = /bits/ 64 <275000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@550000000 { + opp-550000000 { opp-hz = /bits/ 64 <550000000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@733334000 { + opp-733334000 { opp-hz = /bits/ 64 <733334000>; clock-latency-ns = <300>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <300>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; clock-latency-ns = <300>; }; @@ -154,35 +154,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@275000000 { + opp-275000000 { opp-hz = /bits/ 64 <275000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@550000000 { + opp-550000000 { opp-hz = /bits/ 64 <550000000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@733334000 { + opp-733334000 { opp-hz = /bits/ 64 <733334000>; clock-latency-ns = <300>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <300>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index b850b2cd0adc..2c7dc69987df 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -118,27 +118,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <500000>; }; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; clock-latency-ns = <500000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <500000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <500000>; }; - opp@1188000000 { + opp-1188000000 { opp-hz = /bits/ 64 <1188000000>; clock-latency-ns = <500000>; }; -- 2.12.0.432.g71c3a4f4ba37

8 years, 1 month

3
2
0 0

next-20170419 build: 0 failures 1 warnings (next-20170419)

by Build bot for Mark Brown

Tree/Branch: next-20170419 Git describe: next-20170419 Commit: 3ea52566d0 Add linux-next specific files for 20170419 Build Time: 116 min 53 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 1 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-allmodconfig ------------------------------------------------------------------------------- Warnings Summary: 1 2 ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc7-29-g005882e)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc7-29-g005882e Commit: 005882e53d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Build Time: 112 min 36 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc7-12-gfb5e215)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc7-12-gfb5e215 Commit: fb5e2154b7 Merge tag 'trace-v4.11-rc5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Build Time: 177 min 50 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

v3.18.49 build: 0 failures 29 warnings (v3.18.49)

by Build bot for Mark Brown

Tree/Branch: v3.18.49 Git describe: v3.18.49 Commit: e6ff2eed0d Linux 3.18.49 Build Time: 124 min 10 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 29 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 10 warnings 0 mismatches : arm64-allmodconfig 4 warnings 0 mismatches : arm-multi_v7_defconfig 21 warnings 0 mismatches : arm-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 1 warnings 0 mismatches : x86_64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 29 6 ../drivers/tty/sysrq.c:956:33: warning: array subscript is above array bounds [-Warray-bounds] 2 ../include/linux/dynamic_debug.h:78:3: warning: unsupported argument to '__builtin_return_address' 2 ../fs/nfs/nfs4proc.c:3062:10: warning: switch condition has boolean value [-Wswitch-bool] 2 ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 2 ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] 1 ../include/uapi/linux/swab.h:13:15: warning: integer overflow in expression [-Woverflow] 1 ../include/linux/kernel.h:707:17: warning: comparison of distinct pointer types lacks a cast 1 ../fs/btrfs/extent_io.c:2166:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/usb/gadget/function/f_ncm.c:203:0: warning: "NCAPS" redefined 1 ../drivers/staging/vt6655/device_main.c:2997:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/staging/bcm/CmHost.c:1564:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/staging/bcm/CmHost.c:1546:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/staging/bcm/CmHost.c:1503:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/pci/host/pcie-xilinx.c:154:22: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=] 1 ../drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:467:46: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:307:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:303:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 ../drivers/net/ethernet/dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! [-Wcpp] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/iommu/intel-iommu.c:1762:25: warning: unused variable 'drhd' [-Wunused-variable] 1 ../drivers/infiniband/ulp/iser/iser_verbs.c:1206:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/infiniband/ulp/iser/iser_verbs.c:1201:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/infiniband/ulp/iser/iser_verbs.c:1175:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/infiniband/ulp/iser/iser_verbs.c:1174:33: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/infiniband/hw/qib/qib_qp.c:44:0: warning: "BITS_PER_PAGE" redefined 1 ../drivers/block/drbd/drbd_bitmap.c:483:0: warning: "BITS_PER_PAGE_MASK" redefined 1 ../drivers/block/drbd/drbd_bitmap.c:482:0: warning: "BITS_PER_PAGE" redefined 1 ../arch/arm/mach-cns3xxx/pcie.c:313:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 10 warnings, 0 section mismatches Warnings: ../drivers/block/drbd/drbd_bitmap.c:482:0: warning: "BITS_PER_PAGE" redefined ../drivers/block/drbd/drbd_bitmap.c:483:0: warning: "BITS_PER_PAGE_MASK" redefined ../drivers/infiniband/hw/qib/qib_qp.c:44:0: warning: "BITS_PER_PAGE" redefined ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] ../drivers/net/ethernet/dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! [-Wcpp] ../drivers/staging/bcm/CmHost.c:1503:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/staging/bcm/CmHost.c:1546:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/staging/bcm/CmHost.c:1564:3: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] ../drivers/usb/gadget/function/f_ncm.c:203:0: warning: "NCAPS" redefined ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: ../fs/nfs/nfs4proc.c:3062:10: warning: switch condition has boolean value [-Wswitch-bool] ../drivers/tty/sysrq.c:956:33: warning: array subscript is above array bounds [-Warray-bounds] ../drivers/tty/sysrq.c:956:33: warning: array subscript is above array bounds [-Warray-bounds] ../drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:1478:8: warning: 'skb' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 21 warnings, 0 section mismatches Warnings: ../arch/arm/mach-cns3xxx/pcie.c:313:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../fs/btrfs/extent_io.c:2166:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../fs/nfs/nfs4proc.c:3062:10: warning: switch condition has boolean value [-Wswitch-bool] ../include/linux/kernel.h:707:17: warning: comparison of distinct pointer types lacks a cast ../drivers/infiniband/ulp/iser/iser_verbs.c:1174:33: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/infiniband/ulp/iser/iser_verbs.c:1175:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/infiniband/ulp/iser/iser_verbs.c:1201:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/infiniband/ulp/iser/iser_verbs.c:1206:14: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../include/linux/dynamic_debug.h:78:3: warning: unsupported argument to '__builtin_return_address' ../include/linux/dynamic_debug.h:78:3: warning: unsupported argument to '__builtin_return_address' ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/pci/host/pcie-xilinx.c:154:22: warning: format '%d' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=] ../drivers/net/ethernet/dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined [-Wcpp] ../drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:303:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:307:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ../drivers/net/ethernet/mellanox/mlx5/core/debugfs.c:467:46: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/tty/sysrq.c:956:33: warning: array subscript is above array bounds [-Warray-bounds] ../drivers/tty/sysrq.c:956:33: warning: array subscript is above array bounds [-Warray-bounds] ../include/uapi/linux/swab.h:13:15: warning: integer overflow in expression [-Woverflow] ../drivers/staging/vt6655/device_main.c:2997:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/tty/sysrq.c:956:33: warning: array subscript is above array bounds [-Warray-bounds] ../drivers/tty/sysrq.c:956:33: warning: array subscript is above array bounds [-Warray-bounds] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/iommu/intel-iommu.c:1762:25: warning: unused variable 'drhd' [-Wunused-variable] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

v4.9.23 build: 0 failures 0 warnings (v4.9.23)

by Build bot for Mark Brown

Tree/Branch: v4.9.23 Git describe: v4.9.23 Commit: c3582cc56e Linux 4.9.23 Build Time: 95 min 26 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

next-20170418 build: 0 failures 2 warnings (next-20170418)

by Build bot for Mark Brown

Tree/Branch: next-20170418 Git describe: next-20170418 Commit: 495ff9e5a9 Add linux-next specific files for 20170418 Build Time: 196 min 49 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 2 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-allmodconfig ------------------------------------------------------------------------------- Warnings Summary: 2 2 ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] 1 ../drivers/net/ethernet/faraday/ftgmac100.c:1048:12: warning: 'ftgmac100_nway_reset' defined but not used [-Wunused-function] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/net/ethernet/faraday/ftgmac100.c:1048:12: warning: 'ftgmac100_nway_reset' defined but not used [-Wunused-function] ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig

8 years, 1 month

1
0
0 0

[PATCH V2] PM / OPP: Use - instead of @ for DT entries

by Viresh Kumar

Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski <krzk(a)kernel.org> Reported-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> Suggested-by: Mark Rutland <mark.rutland(a)arm.com> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Acked-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> (sunxi) Reviewed-by: Chanwoo Choi <cw00.choi(a)samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk(a)kernel.org> --- V2: - Added more *-by tags. - Included TI DT and example files as well. .../devicetree/bindings/cpufreq/ti-cpufreq.txt | 20 +++---- .../devicetree/bindings/devfreq/exynos-bus.txt | 46 +++++++-------- Documentation/devicetree/bindings/opp/opp.txt | 38 ++++++------- arch/arm/boot/dts/am4372.dtsi | 10 ++-- arch/arm/boot/dts/exynos3250.dtsi | 46 +++++++-------- arch/arm/boot/dts/exynos4210.dtsi | 32 +++++------ arch/arm/boot/dts/exynos4412-prime.dtsi | 4 +- arch/arm/boot/dts/exynos4412.dtsi | 66 +++++++++++----------- arch/arm/boot/dts/exynos5420.dtsi | 40 ++++++------- arch/arm/boot/dts/exynos5800.dtsi | 56 +++++++++--------- arch/arm/boot/dts/pxa25x.dtsi | 8 +-- arch/arm/boot/dts/pxa27x.dtsi | 14 ++--- arch/arm/boot/dts/sun8i-a33.dtsi | 8 +-- arch/arm/boot/dts/uniphier-pro5.dtsi | 32 +++++------ arch/arm/boot/dts/uniphier-pxs2.dtsi | 16 +++--- arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 48 ++++++++-------- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 50 ++++++++-------- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 14 ++--- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 32 +++++------ arch/arm64/boot/dts/zte/zx296718.dtsi | 10 ++-- 20 files changed, 295 insertions(+), 295 deletions(-) diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt index ba0e15ad5bd9..0c38e4b8fc51 100644 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt @@ -63,64 +63,64 @@ cpu0_opp_table: opp-table { * because they can not be enabled simultaneously on a * single SoC. */ - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0x06 0x0010>; opp-suspend; }; - opp100@275000000 { + opp100-275000000 { opp-hz = /bits/ 64 <275000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0x00FF>; opp-suspend; }; - opp100@300000000 { + opp100-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0020>; opp-suspend; }; - opp100@500000000 { + opp100-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0x06 0x0040>; }; - opp120@600000000 { + opp120-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x01 0xFFFF>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0x06 0x0080>; }; - oppturbo@720000000 { + oppturbo-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x01 0xFFFF>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0x06 0x0100>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0x04 0x0200>; diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt index d085ef90d27c..f8e946471a58 100644 --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt @@ -202,23 +202,23 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; @@ -292,23 +292,23 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <900000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; opp-microvolt = <900000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <1000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -318,19 +318,19 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; }; @@ -339,19 +339,19 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; }; }; @@ -360,13 +360,13 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 63725498bd20..e36d261b9ba6 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -186,20 +186,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; clock-latency-ns = <290000>; @@ -265,20 +265,20 @@ independently. * independently. */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000; @@ -341,20 +341,20 @@ DVFS state together. compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000>; @@ -367,20 +367,20 @@ DVFS state together. compatible = "operating-points-v2"; opp-shared; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1050000 1045000 1055000>; opp-microamp = <95000>; clock-latency-ns = <400000>; opp-suspend; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1075000>; opp-microamp = <100000>; clock-latency-ns = <400000>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1100000 1010000 1110000>; opp-microamp = <95000>; @@ -409,7 +409,7 @@ Example 4: Handling multiple regulators compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000>, /* Supply 0 */ <960000>, /* Supply 1 */ @@ -422,7 +422,7 @@ Example 4: Handling multiple regulators /* OR */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>, /* Supply 0 */ <965000 960000 975000>, /* Supply 1 */ @@ -435,7 +435,7 @@ Example 4: Handling multiple regulators /* OR */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>, /* Supply 0 */ <965000 960000 975000>, /* Supply 1 */ @@ -467,7 +467,7 @@ Example 5: opp-supported-hw status = "okay"; opp-shared; - opp@600000000 { + opp-600000000 { /* * Supports all substrate and process versions for 0xF * cuts, i.e. only first four cuts. @@ -478,7 +478,7 @@ Example 5: opp-supported-hw ... }; - opp@800000000 { + opp-800000000 { /* * Supports: * - cuts: only one, 6th cut (represented by 6th bit). @@ -510,7 +510,7 @@ Example 5: opp-supported-hw compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt-slow = <915000 900000 925000>; opp-microvolt-fast = <975000 970000 985000>; @@ -518,7 +518,7 @@ Example 5: opp-supported-hw opp-microamp-fast = <71000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ <925000 910000 935000>; /* Supply vcc1 */ diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 97fcaf415de1..1532ffe1de63 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -60,32 +60,32 @@ cpu0_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp50@300000000 { + opp50-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <950000 931000 969000>; opp-supported-hw = <0xFF 0x01>; opp-suspend; }; - opp100@600000000 { + opp100-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1100000 1078000 1122000>; opp-supported-hw = <0xFF 0x04>; }; - opp120@720000000 { + opp120-720000000 { opp-hz = /bits/ 64 <720000000>; opp-microvolt = <1200000 1176000 1224000>; opp-supported-hw = <0xFF 0x08>; }; - oppturbo@800000000 { + oppturbo-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1260000 1234800 1285200>; opp-supported-hw = <0xFF 0x10>; }; - oppnitro@1000000000 { + oppnitro-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1325000 1298500 1351500>; opp-supported-hw = <0xFF 0x20>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 9c28ef4508e0..590ee442d0ae 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -745,23 +745,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; @@ -835,23 +835,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <900000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; opp-microvolt = <900000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <1000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -861,19 +861,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; }; @@ -882,19 +882,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; }; }; @@ -903,13 +903,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index f9408188f97f..3678d5b44d80 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -335,15 +335,15 @@ compatible = "operating-points-v2"; opp-shared; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1025000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <1050000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1150000>; }; @@ -353,13 +353,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; @@ -368,10 +368,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@5000000 { + opp-5000000 { opp-hz = /bits/ 64 <5000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -380,10 +380,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@10000000 { + opp-10000000 { opp-hz = /bits/ 64 <10000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; }; @@ -392,13 +392,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; }; @@ -407,13 +407,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index e75bc170c89c..a67bd953d754 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -20,12 +20,12 @@ }; &cpu0_opp_table { - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; }; - opp@1704000000 { + opp-1704000000 { opp-hz = /bits/ 64 <1704000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 235bbb69ad7c..ce240d0198b3 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -76,73 +76,73 @@ compatible = "operating-points-v2"; opp-shared; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <925000>; clock-latency-ns = <200000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <950000>; clock-latency-ns = <200000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <975000>; clock-latency-ns = <200000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <987500>; clock-latency-ns = <200000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; clock-latency-ns = <200000>; opp-suspend; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1037500>; clock-latency-ns = <200000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1087500>; clock-latency-ns = <200000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1137500>; clock-latency-ns = <200000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1187500>; clock-latency-ns = <200000>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1250000>; clock-latency-ns = <200000>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1287500>; clock-latency-ns = <200000>; }; - cpu0_opp_1500: opp@1500000000 { + cpu0_opp_1500: opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; @@ -433,23 +433,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <900000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <900000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <900000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <950000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1050000>; }; @@ -459,16 +459,16 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; }; @@ -525,19 +525,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <900000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <925000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <950000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -547,10 +547,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; @@ -559,10 +559,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; }; @@ -571,10 +571,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7dc9dc82afd8..5cd6c7389d51 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -49,62 +49,62 @@ cluster_a15_opp_table: opp_table0 { compatible = "operating-points-v2"; opp-shared; - opp@1800000000 { + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1250000>; clock-latency-ns = <140000>; }; - opp@1700000000 { + opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <1212500>; clock-latency-ns = <140000>; }; - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1175000>; clock-latency-ns = <140000>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1137500>; clock-latency-ns = <140000>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1112500>; clock-latency-ns = <140000>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1062500>; clock-latency-ns = <140000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1037500>; clock-latency-ns = <140000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1012500>; clock-latency-ns = <140000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = < 987500>; clock-latency-ns = <140000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = < 962500>; clock-latency-ns = <140000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = < 937500>; clock-latency-ns = <140000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = < 912500>; clock-latency-ns = <140000>; @@ -114,42 +114,42 @@ cluster_a7_opp_table: opp_table1 { compatible = "operating-points-v2"; opp-shared; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1275000>; clock-latency-ns = <140000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1212500>; clock-latency-ns = <140000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1162500>; clock-latency-ns = <140000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1112500>; clock-latency-ns = <140000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1062500>; clock-latency-ns = <140000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1025000>; clock-latency-ns = <140000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <975000>; clock-latency-ns = <140000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <937500>; clock-latency-ns = <140000>; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index 8213016803e5..9ddb6bacac5a 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -24,60 +24,60 @@ }; &cluster_a15_opp_table { - opp@1700000000 { + opp-1700000000 { opp-microvolt = <1250000>; }; - opp@1600000000 { + opp-1600000000 { opp-microvolt = <1250000>; }; - opp@1500000000 { + opp-1500000000 { opp-microvolt = <1100000>; }; - opp@1400000000 { + opp-1400000000 { opp-microvolt = <1100000>; }; - opp@1300000000 { + opp-1300000000 { opp-microvolt = <1100000>; }; - opp@1200000000 { + opp-1200000000 { opp-microvolt = <1000000>; }; - opp@1100000000 { + opp-1100000000 { opp-microvolt = <1000000>; }; - opp@1000000000 { + opp-1000000000 { opp-microvolt = <1000000>; }; - opp@900000000 { + opp-900000000 { opp-microvolt = <1000000>; }; - opp@800000000 { + opp-800000000 { opp-microvolt = <900000>; }; - opp@700000000 { + opp-700000000 { opp-microvolt = <900000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; @@ -85,46 +85,46 @@ }; &cluster_a7_opp_table { - opp@1300000000 { + opp-1300000000 { opp-microvolt = <1250000>; }; - opp@1200000000 { + opp-1200000000 { opp-microvolt = <1250000>; }; - opp@1100000000 { + opp-1100000000 { opp-microvolt = <1250000>; }; - opp@1000000000 { + opp-1000000000 { opp-microvolt = <1100000>; }; - opp@900000000 { + opp-900000000 { opp-microvolt = <1100000>; }; - opp@800000000 { + opp-800000000 { opp-microvolt = <1100000>; }; - opp@700000000 { + opp-700000000 { opp-microvolt = <1000000>; }; - opp@600000000 { + opp-600000000 { opp-microvolt = <1000000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1000000>; clock-latency-ns = <140000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1000000>; clock-latency-ns = <140000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index f9f4726396a0..95d59be97213 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -93,22 +93,22 @@ pxa250_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@99532800 { + opp-99532800 { opp-hz = /bits/ 64 <99532800>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@199065600 { + opp-199065600 { opp-hz = /bits/ 64 <199065600>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@298598400 { + opp-298598400 { opp-hz = /bits/ 64 <298598400>; opp-microvolt = <1100000 1045000 1650000>; clock-latency-ns = <20>; }; - opp@398131200 { + opp-398131200 { opp-hz = /bits/ 64 <398131200>; opp-microvolt = <1300000 1235000 1650000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index e0fab48ba6fa..5f1d6da02a4c 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -141,37 +141,37 @@ pxa270_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@104000000 { + opp-104000000 { opp-hz = /bits/ 64 <104000000>; opp-microvolt = <900000 900000 1705000>; clock-latency-ns = <20>; }; - opp@156000000 { + opp-156000000 { opp-hz = /bits/ 64 <156000000>; opp-microvolt = <1000000 1000000 1705000>; clock-latency-ns = <20>; }; - opp@208000000 { + opp-208000000 { opp-hz = /bits/ 64 <208000000>; opp-microvolt = <1180000 1180000 1705000>; clock-latency-ns = <20>; }; - opp@312000000 { + opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <1250000 1250000 1705000>; clock-latency-ns = <20>; }; - opp@416000000 { + opp-416000000 { opp-hz = /bits/ 64 <416000000>; opp-microvolt = <1350000 1350000 1705000>; clock-latency-ns = <20>; }; - opp@520000000 { + opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-microvolt = <1450000 1450000 1705000>; clock-latency-ns = <20>; }; - opp@624000000 { + opp-624000000 { opp-hz = /bits/ 64 <624000000>; opp-microvolt = <1550000 1550000 1705000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 0467fb365bfc..7c7f8d8abfa0 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -49,25 +49,25 @@ compatible = "operating-points-v2"; opp-shared; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@816000000 { + opp-816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1008000000 { + opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index dbc5e5333163..22ef2842be3a 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -77,67 +77,67 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@116667000 { + opp-116667000 { opp-hz = /bits/ 64 <116667000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@175000000 { + opp-175000000 { opp-hz = /bits/ 64 <175000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@233334000 { + opp-233334000 { opp-hz = /bits/ 64 <233334000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@466667000 { + opp-466667000 { opp-hz = /bits/ 64 <466667000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@933334000 { + opp-933334000 { opp-hz = /bits/ 64 <933334000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index e9e031d63c1a..acaaa2187843 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -97,35 +97,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index c42dc39c3223..ec11343dc528 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -94,27 +94,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1075000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <975000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <962500>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <950000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <937500>; }; @@ -123,19 +123,19 @@ bus_g2d_266_opp_table: opp_table3 { compatible = "operating-points-v2"; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -143,13 +143,13 @@ bus_gscl_opp_table: opp_table4 { compatible = "operating-points-v2"; - opp@333000000 { + opp-333000000 { opp-hz = /bits/ 64 <333000000>; }; - opp@222000000 { + opp-222000000 { opp-hz = /bits/ 64 <222000000>; }; - opp@166500000 { + opp-166500000 { opp-hz = /bits/ 64 <166500000>; }; }; @@ -158,22 +158,22 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -181,16 +181,16 @@ bus_noc2_opp_table: opp_table6 { compatible = "operating-points-v2"; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 16072c1c3ed3..727f36abf3d4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -119,43 +119,43 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <900000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <925000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <950000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <975000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1050000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1075000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1112500>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1112500>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1150000>; }; @@ -165,63 +165,63 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <900000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <900000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <912500>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <912500>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <937500>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1012500>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1037500>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1062500>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1087500>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1125000>; }; - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1137500>; }; - opp@1700000000 { + opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <1175000>; }; - opp@1800000000 { + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1212500>; }; - opp@1900000000 { + opp-1900000000 { opp-hz = /bits/ 64 <1900000000>; opp-microvolt = <1262500>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index da881f5b6ed4..0f2bee028ab0 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -89,31 +89,31 @@ compatible = "operating-points-v2"; opp-shared; - opp@245000000 { + opp-245000000 { opp-hz = /bits/ 64 <245000000>; clock-latency-ns = <300>; }; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@490000000 { + opp-490000000 { opp-hz = /bits/ 64 <490000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@653334000 { + opp-653334000 { opp-hz = /bits/ 64 <653334000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@980000000 { + opp-980000000 { opp-hz = /bits/ 64 <980000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index a6b3a70dae83..19f782408d54 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -116,35 +116,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@275000000 { + opp-275000000 { opp-hz = /bits/ 64 <275000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@550000000 { + opp-550000000 { opp-hz = /bits/ 64 <550000000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@733334000 { + opp-733334000 { opp-hz = /bits/ 64 <733334000>; clock-latency-ns = <300>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <300>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; clock-latency-ns = <300>; }; @@ -154,35 +154,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@275000000 { + opp-275000000 { opp-hz = /bits/ 64 <275000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@550000000 { + opp-550000000 { opp-hz = /bits/ 64 <550000000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@733334000 { + opp-733334000 { opp-hz = /bits/ 64 <733334000>; clock-latency-ns = <300>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <300>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index b850b2cd0adc..2c7dc69987df 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -118,27 +118,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <500000>; }; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; clock-latency-ns = <500000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <500000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <500000>; }; - opp@1188000000 { + opp-1188000000 { opp-hz = /bits/ 64 <1188000000>; clock-latency-ns = <500000>; }; -- 2.12.0.432.g71c3a4f4ba37

8 years, 1 month

5
9
0 0

v4.4.62 build: 0 failures 0 warnings (v4.4.62)

by Build bot for Mark Brown

Tree/Branch: v4.4.62 Git describe: v4.4.62 Commit: a80c068fbf Linux 4.4.62 Build Time: 147 min 27 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

v4.10.11 build: 0 failures 0 warnings (v4.10.11)

by Build bot for Mark Brown

Tree/Branch: v4.10.11 Git describe: v4.10.11 Commit: 4c031101dc Linux 4.10.11 Build Time: 99 min 36 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

v4.11-rc7 build: 0 failures 0 warnings (v4.11-rc7)

by Build bot for Mark Brown

Tree/Branch: v4.11-rc7 Git describe: v4.11-rc7 Commit: 4f7d029b9b Linux 4.11-rc7 Build Time: 112 min 27 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-202-g4853886)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-202-g4853886 Commit: 48538861b9 Merge tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Build Time: 113 min 16 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-200-gd5ff081)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-200-gd5ff081 Commit: d5ff0814fd Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Build Time: 113 min 14 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-193-g403a39f)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-193-g403a39f Commit: 403a39f8b0 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Build Time: 112 min 29 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-180-g1bf4b12)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-180-g1bf4b12 Commit: 1bf4b1268e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Build Time: 112 min 57 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-142-g9117439)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-142-g9117439 Commit: 91174391bf Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Build Time: 112 min 25 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-112-g82f1faa)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-112-g82f1faa Commit: 82f1faa867 Merge tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux Build Time: 112 min 56 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

[PATCH v4 0/2] iio: stm32 trigger: Add quadrature device and counter

by Benjamin Gaignard

A first encoder IIO driver (104-quad-8) with a count channel already exist. STM32 driver have the same type of feature but with different counting modes. Some parts, like counting direction (up/down) could be generalized so move the corresponding documentation from driver file to sysfs-bus-iio. version 4: - fix indentation in documentation - reword triggered description version 3: - fix typo in documentation - change some functions names version 2: - since iio: Generalize counting direction modes commit of version has being pushed in iio.git testing branch I have remove it from this serie. - split the original attribute in 2: one for quadrature modes and one for enable modes. - add scale info - change modes to more generic names to be able to merge them with 104-quad-8 in the futur. Benjamin Gaignard (2): iio: stm32 trigger: Add quadrature encoder device iio: stm32 trigger: Add counter enable modes .../ABI/testing/sysfs-bus-iio-timer-stm32 | 71 ++++- drivers/iio/trigger/stm32-timer-trigger.c | 314 ++++++++++++++++++++- include/linux/mfd/stm32-timers.h | 2 + 3 files changed, 377 insertions(+), 10 deletions(-) -- 1.9.1

8 years, 1 month

3
6
0 0

master build: 0 failures 0 warnings (v4.11-rc6-78-ga232591)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-78-ga232591 Commit: a232591ba2 Merge branch 'akpm' (patches from Andrew) Build Time: 112 min 34 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-66-gd8a6e3a)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-66-gd8a6e3a Commit: d8a6e3aed9 ia64: restore symbol versions for symbols defined in assembly Build Time: 112 min 42 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

v3.12.73 build: 1 failures 179 warnings (v3.12.73)

by Build bot for Mark Brown

Tree/Branch: v3.12.73 Git describe: v3.12.73 Commit: ef474b4406 Linux 3.12.73 Build Time: 26 min 13 sec Passed: 7 / 8 ( 87.50 %) Failed: 1 / 8 ( 12.50 %) Errors: 9 Warnings: 179 Section Mismatches: 0 Failed defconfigs: arm64-allmodconfig Errors: arm64-allmodconfig /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 146 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 37 warnings 0 mismatches : arm-allmodconfig 8 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 9 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known 1 /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known Warnings Summary: 179 2 /home/broonie/build/linux-stable/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable/kernel/cpu.c:185:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 /home/broonie/build/linux-stable/include/linux/ftrace.h:615:40: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] 2 /home/broonie/build/linux-stable/include/linux/ftrace.h:614:40: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] 2 /home/broonie/build/linux-stable/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 2 /home/broonie/build/linux-stable/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] 2 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8991.c:526:38: warning: 'wm8991_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8991.c:126:27: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8991.c:106:27: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8990.c:527:38: warning: 'wm8990_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8990.c:126:35: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8990.c:118:35: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8988.c:273:30: warning: 'wm8988_rline_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8974.c:202:38: warning: 'wm8974_mic_boost_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8974.c:198:38: warning: 'wm8974_aux_boost_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8900.c:451:38: warning: 'wm8900_dapm_routput2_control' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8900.c:448:38: warning: 'wm8900_dapm_loutput2_control' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/wm8737.c:116:30: warning: 'high_3d' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/tlv320aic23.c:56:30: warning: 'tlv320aic23_rec_src' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/ml26124.c:71:35: warning: 'ngth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/max98090.c:876:30: warning: 'max98090_pa2en_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/max98090.c:872:30: warning: 'max98090_pa1en_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/max98090.c:389:35: warning: 'max98090_alc_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/max98090.c:387:35: warning: 'max98090_sidetone_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/cs42l73.c:383:38: warning: 'xsp_output_mux' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/soc/codecs/cs42l73.c:380:38: warning: 'vsp_output_mux' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/sound/pci/ac97/ac97_codec.c:613:38: warning: 'snd_ac97_controls_master_mono' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/net/wireless/nl80211.c:393:1: warning: 'nl80211_wowlan_tcp_policy' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/net/wireless/nl80211.c:380:1: warning: 'nl80211_wowlan_policy' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/net/sched/sch_choke.c:589:37: warning: 'choke_class_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/net/netfilter/xt_recent.c:103:37: warning: 'recent_old_fops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/net/mac80211/debugfs_sta.c:35:37: warning: 'sta_aid_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/net/mac80211/debugfs.c:70:23: warning: 'rate_ctrl_alg_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/net/ipv4/arp.c:152:31: warning: 'arp_broken_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/net/dcb/dcbnl.c:183:32: warning: 'dcbnl_ieee_app' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/kernel/modsign_pubkey.c:28:31: warning: 'annoy_ccache' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/fs/ncpfs/dir.c:860:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/fs/fscache/object.c:34:25: warning: 'fscache_osm_CREATE_OBJECT' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/fs/cifs/netmisc.c:133:40: warning: 'mapping_table_ERRHRD' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/fs/cifs/cifsacl.c:43:30: warning: 'sid_user' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/fs/afs/cmservice.c:78:35: warning: 'afs_SRXCBProbeUuid' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/xen-fbfront.c:588:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] 1 /home/broonie/build/linux-stable/drivers/video/backlight/s6e63m0.c:331:29: warning: 'seq_elvss_off' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/s6e63m0.c:317:29: warning: 'seq_acl_off' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/lms501kf03.c:96:28: warning: 'seq_up_dn' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/lms501kf03.c:100:28: warning: 'seq_sleep_in' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:92:29: warning: 'seq_swreset' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:414:29: warning: 'seq_el_on' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:402:29: warning: 'seq_els_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:390:29: warning: 'seq_gls_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:378:29: warning: 'seq_sd_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:366:29: warning: 'seq_gam_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:356:29: warning: 'seq_vbl_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:346:29: warning: 'seq_vbh_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:334:29: warning: 'seq_vint_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:324:29: warning: 'seq_vmos_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:314:29: warning: 'seq_vgl_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:304:29: warning: 'seq_vgh_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:294:29: warning: 'seq_vreg1_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:284:29: warning: 'seq_vl3_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:274:29: warning: 'seq_vci1_2nd_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:264:29: warning: 'seq_vl2_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:254:29: warning: 'seq_vl1_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:244:29: warning: 'seq_vci1_1st_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:212:29: warning: 'seq_pwr_ctrl' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:187:29: warning: 'seq_apon' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/usb/serial/garmin_gps.c:205:28: warning: 'PRIVATE_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/usb/serial/garmin_gps.c:199:28: warning: 'GARMIN_STOP_PVT_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/usb/serial/garmin_gps.c:197:28: warning: 'GARMIN_START_PVT_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/usb/serial/garmin_gps.c:195:28: warning: 'GARMIN_APP_LAYER_REPLY' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/usb/gadget/nokia.c:45:19: warning: 'product_nokia' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/usb/gadget/mv_udc_core.c:62:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/usb/gadget/mv_u3d_core.c:39:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/usb/gadget/gmidi.c:47:19: warning: 'shortname' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6656/usbpipe.c:174:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/staging/vt6656/usbpipe.c:115:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/staging/vt6656/mib.c:385:4: warning: this 'else' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/staging/vt6656/main_usb.c:1210:7: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/staging/vt6656/iwctl.c:1825:25: warning: 'iwctl_private_handler' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6656/bssdb.c:506:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/staging/rtl8712/rtl871x_ioctl_linux.c:69:27: warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/staging/rtl8712/ieee80211.c:78:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2190:42: warning: array subscript is above array bounds [-Warray-bounds] 1 /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2188:45: warning: iteration 14 invokes undefined behavior [-Waggressive-loop-optimizations] 1 /home/broonie/build/linux-stable/drivers/staging/frontier/tranzport.c:276:2: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1461:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1336:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/regulator/pcap-regulator.c:93:27: warning: 'SW3_table' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types] 1 /home/broonie/build/linux-stable/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable/drivers/net/wireless/ti/wlcore/spi.c:321:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/rtlwifi/efuse.c:38:31: warning: 'RTL8712_SDIO_EFUSE_TABLE' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/rtlwifi/efuse.c:34:17: warning: 'MAX_PGPKT_SIZE' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c:520:17: warning: 'rtl8225z2_tx_power_ofdm' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/libertas_tf/main.c:30:19: warning: 'lbtf_driver_version' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9298:18: warning: 'papd_cal_scalars_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9231:18: warning: 'papd_comp_epsilon_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9164:18: warning: 'papd_cal_scalars_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9097:18: warning: 'papd_comp_epsilon_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c:1521:33: warning: 'dot11lcnphytbl_rx_gain_info_rev1' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:483:19: warning: 'retry_limit' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c:36:19: warning: 'brcmf_version' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/usb/r815x.c:197:33: warning: 'r8152_info' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] 1 /home/broonie/build/linux-stable/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/drivers/misc/bh1770glc.c:184:17: warning: 'prox_curr_ma' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/misc/apds990x.c:191:17: warning: 'ir_currents' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/media/usb/usbvision/usbvision-core.c:94:18: warning: 'min_imgheight' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/usb/usbvision/usbvision-core.c:93:18: warning: 'min_imgwidth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/usb/usbvision/usbvision-core.c:92:18: warning: 'max_imgheight' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/usb/usbvision/usbvision-core.c:91:18: warning: 'max_imgwidth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/usb/gspca/ov519.c:375:37: warning: 'ovfx2_cif_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/usb/gspca/ov519.c:363:37: warning: 'ovfx2_vga_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/tuners/r820t.c:349:18: warning: 'r820t_mixer_gain_steps' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/tuners/r820t.c:345:18: warning: 'r820t_lna_gain_steps' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable/drivers/media/dvb-frontends/drxk_hard.c:2223:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/media/dvb-frontends/drxd_hard.c:2695:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/media/dvb-frontends/drxd_hard.c:2635:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable/drivers/media/dvb-frontends/dib0090.c:852:18: warning: 'rf_ramp_pwm_sband' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/media/dvb-frontends/dib0090.c:800:18: warning: 'bb_ramp_pwm_boost' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/input/misc/xen-kbdfront.c:257:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] 1 /home/broonie/build/linux-stable/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/iio/adc/ad7793.c:449:37: warning: 'ad7797_attribute_group' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/hwmon/nct6775.c:580:18: warning: 'NCT6106_REG_TOLERANCE_H' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1042:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:383:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:380:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:377:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 9 errors, 146 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known /home/broonie/build/linux-stable/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known Warnings: /home/broonie/build/linux-stable/kernel/cpu.c:185:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/include/linux/ftrace.h:614:40: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] /home/broonie/build/linux-stable/include/linux/ftrace.h:615:40: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] /home/broonie/build/linux-stable/fs/afs/cmservice.c:78:35: warning: 'afs_SRXCBProbeUuid' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/kernel/modsign_pubkey.c:28:31: warning: 'annoy_ccache' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] /home/broonie/build/linux-stable/sound/pci/ac97/ac97_codec.c:613:38: warning: 'snd_ac97_controls_master_mono' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/cs42l73.c:383:38: warning: 'xsp_output_mux' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/cs42l73.c:380:38: warning: 'vsp_output_mux' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/max98090.c:876:30: warning: 'max98090_pa2en_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/max98090.c:872:30: warning: 'max98090_pa1en_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/max98090.c:389:35: warning: 'max98090_alc_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/max98090.c:387:35: warning: 'max98090_sidetone_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/ml26124.c:71:35: warning: 'ngth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/tlv320aic23.c:56:30: warning: 'tlv320aic23_rec_src' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/fs/cifs/netmisc.c:133:40: warning: 'mapping_table_ERRHRD' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1042:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/sound/soc/codecs/wm8737.c:116:30: warning: 'high_3d' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/fs/cifs/cifsacl.c:43:30: warning: 'sid_user' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8900.c:451:38: warning: 'wm8900_dapm_routput2_control' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8900.c:448:38: warning: 'wm8900_dapm_loutput2_control' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8974.c:202:38: warning: 'wm8974_mic_boost_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8974.c:198:38: warning: 'wm8974_aux_boost_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8988.c:273:30: warning: 'wm8988_rline_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8990.c:527:38: warning: 'wm8990_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8990.c:126:35: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8990.c:118:35: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/sound/soc/codecs/wm8991.c:526:38: warning: 'wm8991_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8991.c:126:27: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/sound/soc/codecs/wm8991.c:106:27: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/net/dcb/dcbnl.c:183:32: warning: 'dcbnl_ieee_app' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/iio/adc/ad7793.c:449:37: warning: 'ad7797_attribute_group' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/hwmon/nct6775.c:580:18: warning: 'NCT6106_REG_TOLERANCE_H' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] /home/broonie/build/linux-stable/fs/fscache/object.c:34:25: warning: 'fscache_osm_CREATE_OBJECT' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/input/misc/xen-kbdfront.c:257:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable/fs/ncpfs/dir.c:860:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/net/mac80211/debugfs.c:70:23: warning: 'rate_ctrl_alg_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/net/mac80211/debugfs_sta.c:35:37: warning: 'sta_aid_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/dvb-frontends/drxd_hard.c:2635:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/media/dvb-frontends/drxd_hard.c:2695:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/media/dvb-frontends/drxk_hard.c:2223:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/net/netfilter/xt_recent.c:103:37: warning: 'recent_old_fops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/dvb-frontends/dib0090.c:852:18: warning: 'rf_ramp_pwm_sband' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/dvb-frontends/dib0090.c:800:18: warning: 'bb_ramp_pwm_boost' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/misc/bh1770glc.c:184:17: warning: 'prox_curr_ma' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/misc/apds990x.c:191:17: warning: 'ir_currents' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/media/tuners/r820t.c:349:18: warning: 'r820t_mixer_gain_steps' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/tuners/r820t.c:345:18: warning: 'r820t_lna_gain_steps' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/net/sched/sch_choke.c:589:37: warning: 'choke_class_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types] /home/broonie/build/linux-stable/drivers/media/usb/gspca/ov519.c:375:37: warning: 'ovfx2_cif_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/usb/gspca/ov519.c:363:37: warning: 'ovfx2_vga_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/regulator/pcap-regulator.c:93:27: warning: 'SW3_table' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/net/wireless/nl80211.c:393:1: warning: 'nl80211_wowlan_tcp_policy' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/net/wireless/nl80211.c:380:1: warning: 'nl80211_wowlan_policy' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/usb/usbvision/usbvision-core.c:94:18: warning: 'min_imgheight' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/usb/usbvision/usbvision-core.c:93:18: warning: 'min_imgwidth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/usb/usbvision/usbvision-core.c:92:18: warning: 'max_imgheight' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/media/usb/usbvision/usbvision-core.c:91:18: warning: 'max_imgwidth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1336:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-atmel.c:1461:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/net/usb/r815x.c:197:33: warning: 'r8152_info' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c:36:19: warning: 'brcmf_version' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:483:19: warning: 'retry_limit' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/staging/frontier/tranzport.c:276:2: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/net/wireless/libertas_tf/main.c:30:19: warning: 'lbtf_driver_version' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c:1521:33: warning: 'dot11lcnphytbl_rx_gain_info_rev1' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9298:18: warning: 'papd_cal_scalars_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9231:18: warning: 'papd_comp_epsilon_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9164:18: warning: 'papd_cal_scalars_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9097:18: warning: 'papd_comp_epsilon_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c:520:17: warning: 'rtl8225z2_tx_power_ofdm' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/rtlwifi/efuse.c:38:31: warning: 'RTL8712_SDIO_EFUSE_TABLE' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/net/wireless/rtlwifi/efuse.c:34:17: warning: 'MAX_PGPKT_SIZE' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:414:29: warning: 'seq_el_on' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:402:29: warning: 'seq_els_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:390:29: warning: 'seq_gls_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:378:29: warning: 'seq_sd_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:366:29: warning: 'seq_gam_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:356:29: warning: 'seq_vbl_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:346:29: warning: 'seq_vbh_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:334:29: warning: 'seq_vint_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:324:29: warning: 'seq_vmos_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:314:29: warning: 'seq_vgl_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:304:29: warning: 'seq_vgh_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:294:29: warning: 'seq_vreg1_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:284:29: warning: 'seq_vl3_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:274:29: warning: 'seq_vci1_2nd_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:264:29: warning: 'seq_vl2_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:254:29: warning: 'seq_vl1_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:244:29: warning: 'seq_vci1_1st_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:212:29: warning: 'seq_pwr_ctrl' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:187:29: warning: 'seq_apon' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/ld9040.c:92:29: warning: 'seq_swreset' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/lms501kf03.c:100:28: warning: 'seq_sleep_in' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/lms501kf03.c:96:28: warning: 'seq_up_dn' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/s6e63m0.c:331:29: warning: 'seq_elvss_off' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/video/backlight/s6e63m0.c:317:29: warning: 'seq_acl_off' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/usb/gadget/gmidi.c:47:19: warning: 'shortname' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/usb/gadget/nokia.c:45:19: warning: 'product_nokia' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/usb/gadget/mv_udc_core.c:62:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/net/wireless/ti/wlcore/spi.c:321:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/usb/gadget/mv_u3d_core.c:39:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable/drivers/video/xen-fbfront.c:588:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable/drivers/staging/rtl8712/rtl871x_ioctl_linux.c:69:27: warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/staging/rtl8712/ieee80211.c:78:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2188:45: warning: iteration 14 invokes undefined behavior [-Waggressive-loop-optimizations] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2190:42: warning: array subscript is above array bounds [-Warray-bounds] /home/broonie/build/linux-stable/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/vt6656/main_usb.c:1210:7: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/usb/serial/garmin_gps.c:205:28: warning: 'PRIVATE_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/usb/serial/garmin_gps.c:199:28: warning: 'GARMIN_STOP_PVT_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/usb/serial/garmin_gps.c:197:28: warning: 'GARMIN_START_PVT_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/usb/serial/garmin_gps.c:195:28: warning: 'GARMIN_APP_LAYER_REPLY' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/staging/vt6656/bssdb.c:506:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/staging/vt6656/mib.c:385:4: warning: this 'else' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/staging/vt6656/iwctl.c:1825:25: warning: 'iwctl_private_handler' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/drivers/staging/vt6656/usbpipe.c:115:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable/drivers/staging/vt6656/usbpipe.c:174:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 37 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:377:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:380:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable/drivers/ata/pata_hpt366.c:383:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] /home/broonie/build/linux-stable/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] /home/broonie/build/linux-stable/drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable/drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable/kernel/cpu.c:185:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] /home/broonie/build/linux-stable/include/linux/ftrace.h:614:40: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] /home/broonie/build/linux-stable/include/linux/ftrace.h:615:40: warning: calling '__builtin_return_address' with a nonzero argument is unsafe [-Wframe-address] /home/broonie/build/linux-stable/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] /home/broonie/build/linux-stable/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable/net/ipv4/arp.c:152:31: warning: 'arp_broken_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig x86_64-defconfig

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-65-g2760078)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-65-g2760078 Commit: 2760078203 Merge tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Build Time: 146 min 8 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-62-gee921c7)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-62-gee921c7 Commit: ee921c762c Merge tag 'drm-fixes-for-v4.11-rc7' of git://people.freedesktop.org/~airlied/linux Build Time: 168 min 27 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

next-20170413 build: 0 failures 3 warnings (next-20170413)

by Build bot for Mark Brown

Tree/Branch: next-20170413 Git describe: next-20170413 Commit: f4fa27cbc0 Add linux-next specific files for 20170413 Build Time: 218 min 26 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 3 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v5_defconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 1 warnings 0 mismatches : x86_64-defconfig 3 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 3 6 ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast 2 ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] 1 ../drivers/net/ethernet/faraday/ftgmac100.c:1048:12: warning: 'ftgmac100_nway_reset' defined but not used [-Wunused-function] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../drivers/net/ethernet/faraday/ftgmac100.c:1048:12: warning: 'ftgmac100_nway_reset' defined but not used [-Wunused-function] ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig arm-multi_v4t_defconfig

8 years, 1 month

1
0
0 0

[PATCH V2 0/3] sched: Minor cleanups

by Viresh Kumar

Hi, Avoid reinitializing memory which is already set to zero. V1->V2: - Don't remove field initializers from 2nd and 3rd patch. - Drop 4th patch (sched: core: drop useless expression from sched_init()). -- viresh Viresh Kumar (3): sched: topology: drop memset() from init_rootdomain() sched: cpudeadline: don't re-initialize struct cpudl sched: cpupri: don't re-initialize struct cpupri kernel/sched/cpudeadline.c | 1 - kernel/sched/cpupri.c | 2 -- kernel/sched/topology.c | 4 +--- 3 files changed, 1 insertion(+), 6 deletions(-) -- 2.12.0.432.g71c3a4f4ba37

8 years, 1 month

1
3
0 0

v4.10.10 build: 0 failures 0 warnings (v4.10.10)

by Build bot for Mark Brown

Tree/Branch: v4.10.10 Git describe: v4.10.10 Commit: e6925852d5 Linux 4.10.10 Build Time: 99 min 38 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

[RFC 0/9] cpufreq: schedutil: Allow remote wakeups

by Viresh Kumar

Hi, This is based of the work done by Steve Muckle [1] before he left Linaro and most of the patches are still under his authorship. I have done couple of improvements (detailed in individual patches) and removed the late callback support [2] as I wasn't sure of the value it adds. We can include it separately if others feel it is required. This series is based on pm/linux-next with patches [3] and [4] applied on top of it. With Android UI and benchmarks the latency of cpufreq response to certain scheduling events can become very critical. Currently, callbacks into schedutil are only made from the scheduler if the target CPU of the event is the same as the current CPU. This means there are certain situations where a target CPU may not run schedutil for some time. One testcase to show this behavior is where a task starts running on CPU0, then a new task is also spawned on CPU0 by a task on CPU1. If the system is configured such that new tasks should receive maximum demand initially, this should result in CPU0 increasing frequency immediately. Because of the above mentioned limitation though this does not occur. This is verified using ftrace with the sample [5] application. This patchset updates the scheduler to call cpufreq callbacks for remote CPUs as well and updates schedutil governor to deal with it. An additional flag is added to cpufreq policies to avoid sending IPIs to remote CPUs to update the frequency, if CPUs on the platform can change frequency of any other CPU. This series is tested with couple of usecases (Android: hackbench, recentfling, galleryfling, vellamo, Ubuntu: hackbench) on ARM hikey board (64 bit octa-core, single policy). Only galleryfling showed minor improvements, while others didn't had much deviation. The reason being that this patchset only targets a corner case, where following are required to be true to improve performance and that doesn't happen too often with these tests: - Task is migrated to another CPU. - The task has maximum demand initially, and should take the CPU to higher OPPs. - And the target CPU doesn't call into schedutil until the next tick, without this patchset. -- viresh [1] https://git.linaro.org/people/steve.muckle/kernel.git/log/?h=pmwg-integrati… [2] https://git.linaro.org/people/steve.muckle/kernel.git/commit/?h=pmwg-integr… [3] https://marc.info/?l=linux-kernel&m=148766093718487&w=2 [4] https://marc.info/?l=linux-kernel&m=148903231720432&w=2 [5] http://pastebin.com/7LkMSRxE Steve Muckle (8): sched: cpufreq: add cpu to update_util_data irq_work: add irq_work_queue_on for !CONFIG_SMP sched: cpufreq: extend irq work to support fast switches sched: cpufreq: remove smp_processor_id() in remote paths sched: cpufreq: detect, process remote callbacks cpufreq: governor: support scheduler cpufreq callbacks on remote CPUs intel_pstate: ignore scheduler cpufreq callbacks on remote CPUs sched: cpufreq: enable remote sched cpufreq callbacks Viresh Kumar (1): cpufreq: Add dvfs_possible_from_any_cpu policy flag drivers/cpufreq/cpufreq-dt.c | 1 + drivers/cpufreq/cpufreq_governor.c | 2 +- drivers/cpufreq/intel_pstate.c | 3 ++ include/linux/cpufreq.h | 9 +++++ include/linux/irq_work.h | 7 ++++ include/linux/sched/cpufreq.h | 1 + kernel/sched/cpufreq.c | 1 + kernel/sched/cpufreq_schedutil.c | 80 +++++++++++++++++++++++++++++--------- kernel/sched/fair.c | 6 ++- kernel/sched/sched.h | 3 +- 10 files changed, 90 insertions(+), 23 deletions(-) -- 2.7.1.410.g6faf27b

8 years, 1 month

3
25
0 0

v4.9.22 build: 0 failures 0 warnings (v4.9.22)

by Build bot for Mark Brown

Tree/Branch: v4.9.22 Git describe: v4.9.22 Commit: cf2586e60e Linux 4.9.22 Build Time: 95 min 55 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

v4.4.61 build: 0 failures 0 warnings (v4.4.61)

by Build bot for Mark Brown

Tree/Branch: v4.4.61 Git describe: v4.4.61 Commit: ec5e61608a Linux 4.4.61 Build Time: 110 min 57 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

next-20170412 build: 0 failures 2 warnings (next-20170412)

by Build bot for Mark Brown

Tree/Branch: next-20170412 Git describe: next-20170412 Commit: 1267f8fa29 Add linux-next specific files for 20170412 Build Time: 280 min 43 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 2 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v5_defconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 1 warnings 0 mismatches : x86_64-defconfig 2 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 2 6 ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast 2 ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig arm-multi_v4t_defconfig

8 years, 1 month

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc6-29-gb9b3322)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-29-gb9b3322 Commit: b9b3322f13 Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit Build Time: 283 min 8 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

[PATCH 00/17] thermal: cpu_cooling: improve interaction with cpufreq core

by Viresh Kumar

Hi Guys, The cpu_cooling driver is designed to use CPU frequency scaling to avoid high thermal states for a platform. But it wasn't glued really well with cpufreq core. This series tries to improve interactions between cpufreq core and cpu_cooling driver and does some fixes/cleanups to the cpu_cooling driver. I am a bit confused about which tree this series should go through, PM or thermal. This series has dependency on few other patches which are already merged in the PM [1] tree and thermal [2] tree. As this is 4.12 material, all of this should go through only one tree to avoid conflicts. I assume that one of Rafael and Rui have to drop the existing patch(es) from their trees and let the other one apply all of these. I would let you guys decide on that. Sorry for the trouble. I have tested it on ARM 32 (exynos) and 64 bit (hikey) boards and have pushed them for 0-day build bot and kernel CI testing as well. We should know if something is broken with these. @Javi: It would be good if you can give them a test, specially because of your work on the "power" specific bits in the driver. Pushed here as well: git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git thermal/cooling -- viresh [1] https://marc.info/?l=linux-kernel&m=148946890403271&w=2 [2] https://marc.info/?l=linux-kernel&m=148644060126593&w=2 Viresh Kumar (17): thermal: cpu_cooling: Avoid accessing potentially freed structures thermal: cpu_cooling: rearrange globals thermal: cpu_cooling: Replace cpufreq_device with cpufreq_dev thermal: cpu_cooling: replace cool_dev with cdev thermal: cpu_cooling: remove cpufreq_cooling_get_level() thermal: cpu_cooling: get rid of a variable in cpufreq_set_cur_state() thermal: cpu_cooling: use cpufreq_policy to register cooling device cpufreq: create cpufreq_table_count_valid_entries() thermal: cpu_cooling: store cpufreq policy thermal: cpu_cooling: OPPs are registered for all CPUs thermal: cpu_cooling: get rid of 'allowed_cpus' thermal: cpu_cooling: merge frequency and power tables thermal: cpu_cooling: create structure for idle time stats thermal: cpu_cooling: get_level() can't fail thermal: cpu_cooling: don't store cpu_dev in cpufreq_dev thermal: cpu_cooling: 'freq' can't be zero in cpufreq_state2power() thermal: cpu_cooling: Rearrange struct cpufreq_cooling_device drivers/cpufreq/arm_big_little.c | 2 +- drivers/cpufreq/cpufreq-dt.c | 2 +- drivers/cpufreq/cpufreq_stats.c | 13 +- drivers/cpufreq/dbx500-cpufreq.c | 2 +- drivers/cpufreq/mt8173-cpufreq.c | 4 +- drivers/cpufreq/qoriq-cpufreq.c | 3 +- drivers/thermal/cpu_cooling.c | 530 ++++++++------------- drivers/thermal/imx_thermal.c | 22 +- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 22 +- include/linux/cpu_cooling.h | 32 +- include/linux/cpufreq.h | 14 + 11 files changed, 272 insertions(+), 374 deletions(-) -- 2.7.1.410.g6faf27b

8 years, 1 month

2
23
0 0

v4.4.60-rt73 build: 0 failures 0 warnings (v4.4.60-rt73)

by Build bot for Mark Brown

Tree/Branch: v4.4.60-rt73 Git describe: v4.4.60-rt73 Commit: 85ea85d2fb Linux 4.4.60-rt73 Build Time: 87 min 32 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

v3.2.88-rt126 build: 2 failures 34 warnings (v3.2.88-rt126)

by Build bot for Mark Brown

Tree/Branch: v3.2.88-rt126 Git describe: v3.2.88-rt126 Commit: ed036322e8 Linux 3.2.88-rt126 Build Time: 0 min 4 sec Passed: 2 / 4 ( 50.00 %) Failed: 2 / 4 ( 50.00 %) Errors: 4 Warnings: 34 Section Mismatches: 0 Failed defconfigs: arm-allmodconfig arm-allnoconfig Errors: arm-allnoconfig /home/broonie/build/linux-stable-rt/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 9 warnings 0 mismatches : x86_64-allnoconfig 2 warnings 0 mismatches : arm-allmodconfig 19 warnings 0 mismatches : arm-allnoconfig 11 warnings 0 mismatches : x86_64-defconfig ------------------------------------------------------------------------------- Errors summary: 4 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) Warnings Summary: 34 2 /home/broonie/build/linux-stable-rt/mm/slub.c:4473:11: warning: 'x' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 /home/broonie/build/linux-stable-rt/mm/slub.c:1291:6: warning: unused variable 'idx' [-Wunused-variable] 2 /home/broonie/build/linux-stable-rt/mm/slub.c:1291:11: warning: unused variable 'order' [-Wunused-variable] 2 /home/broonie/build/linux-stable-rt/fs/namespace.c:2561:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 /home/broonie/build/linux-stable-rt/fs/namespace.c:2561:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 /home/broonie/build/linux-stable-rt/drivers/usb/host/ohci-dbg.c:77:11: warning: the comparison will always evaluate as 'true' for the address of 'next' will never be NULL [-Waddress] 2 .config:27:warning: symbol value '' invalid for PHYS_OFFSET 1 /home/broonie/build/linux-stable-rt/kernel/sched.c:1895:13: warning: 'update_idle_cpu_load' declared 'static' but never defined [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/include/linux/blkdev.h:1291:39: warning: statement with no effect [-Wunused-value] 1 /home/broonie/build/linux-stable-rt/fs/compat_ioctl.c:611:38: warning: typedef 'SS' locally defined but not used [-Wunused-local-typedefs] 1 /home/broonie/build/linux-stable-rt/drivers/gpu/drm/i915/i915_drv.c:975:0: warning: "NEEDS_FORCE_WAKE" redefined 1 /home/broonie/build/linux-stable-rt/drivers/acpi/acpica/nsrepair.c:199:21: warning: 'new_object' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 /home/broonie/build/linux-stable-rt/arch/x86/kernel/quirks.c:407:21: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 /home/broonie/build/linux-stable-rt/arch/x86/kernel/quirks.c:367:4: warning: 'd' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 /home/broonie/build/linux-stable-rt/arch/x86/kernel/quirks.c:361:4: warning: 'b' is used uninitialized in this function [-Wuninitialized] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:342:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:272:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:265:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:131:35: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:127:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:121:3: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:120:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:114:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/swab.h:25:28: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/processor.h:82:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/processor.h:102:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/irqflags.h:11:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/fpstate.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/cachetype.h:33:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/cachetype.h:28:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/cacheflush.h:196:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/cacheflush.h:194:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/bitops.h:217:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] 1 /home/broonie/build/linux-stable-rt/arch/arm/include/asm/atomic.h:30:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- x86_64-allnoconfig : PASS, 0 errors, 9 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/kernel/sched.c:1895:13: warning: 'update_idle_cpu_load' declared 'static' but never defined [-Wunused-function] /home/broonie/build/linux-stable-rt/arch/x86/kernel/quirks.c:361:4: warning: 'b' is used uninitialized in this function [-Wuninitialized] /home/broonie/build/linux-stable-rt/arch/x86/kernel/quirks.c:367:4: warning: 'd' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable-rt/arch/x86/kernel/quirks.c:407:21: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable-rt/fs/namespace.c:2561:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable-rt/fs/namespace.c:2561:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable-rt/mm/slub.c:1291:11: warning: unused variable 'order' [-Wunused-variable] /home/broonie/build/linux-stable-rt/mm/slub.c:1291:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/mm/slub.c:4473:11: warning: 'x' may be used uninitialized in this function [-Wmaybe-uninitialized] ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:27:warning: symbol value '' invalid for PHYS_OFFSET .config:27:warning: symbol value '' invalid for PHYS_OFFSET ------------------------------------------------------------------------------- arm-allnoconfig : FAIL, 4 errors, 19 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable-rt/arch/arm/include/asm/div64.h:77:7: error: '__LINUX_ARM_ARCH__' undeclared (first use in this function) /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-cache.h:129:2: error: #error Unknown cache maintenance model /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-df.h:107:2: error: #error Unknown data abort handler type /home/broonie/build/linux-stable-rt/arch/arm/include/asm/glue-pf.h:54:2: error: #error Unknown prefetch abort handler type Warnings: /home/broonie/build/linux-stable-rt/arch/arm/include/asm/irqflags.h:11:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:114:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:120:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:121:3: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:127:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:131:35: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:265:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:272:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/system.h:342:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/bitops.h:217:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/swab.h:25:28: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/fpstate.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/processor.h:82:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/processor.h:102:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/atomic.h:30:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/cachetype.h:28:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/cachetype.h:33:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/cacheflush.h:194:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /home/broonie/build/linux-stable-rt/arch/arm/include/asm/cacheflush.h:196:7: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 11 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/fs/namespace.c:2561:8: warning: 'kernel_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable-rt/fs/namespace.c:2561:8: warning: 'kernel_type' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable-rt/mm/slub.c:1291:11: warning: unused variable 'order' [-Wunused-variable] /home/broonie/build/linux-stable-rt/mm/slub.c:1291:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/mm/slub.c:4473:11: warning: 'x' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable-rt/drivers/acpi/acpica/nsrepair.c:199:21: warning: 'new_object' may be used uninitialized in this function [-Wmaybe-uninitialized] /home/broonie/build/linux-stable-rt/fs/compat_ioctl.c:611:38: warning: typedef 'SS' locally defined but not used [-Wunused-local-typedefs] /home/broonie/build/linux-stable-rt/drivers/gpu/drm/i915/i915_drv.c:975:0: warning: "NEEDS_FORCE_WAKE" redefined /home/broonie/build/linux-stable-rt/include/linux/blkdev.h:1291:39: warning: statement with no effect [-Wunused-value] /home/broonie/build/linux-stable-rt/drivers/usb/host/ohci-dbg.c:77:11: warning: the comparison will always evaluate as 'true' for the address of 'next' will never be NULL [-Waddress] /home/broonie/build/linux-stable-rt/drivers/usb/host/ohci-dbg.c:77:11: warning: the comparison will always evaluate as 'true' for the address of 'next' will never be NULL [-Waddress] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches:

8 years, 1 month

1
0
0 0

v3.12.72-rt97 build: 1 failures 186 warnings (v3.12.72-rt97)

by Build bot for Mark Brown

Tree/Branch: v3.12.72-rt97 Git describe: v3.12.72-rt97 Commit: a679546705 Linux 3.12.72-rt97 Build Time: 29 min 25 sec Passed: 7 / 8 ( 87.50 %) Failed: 1 / 8 ( 12.50 %) Errors: 9 Warnings: 186 Section Mismatches: 0 Failed defconfigs: arm64-allmodconfig Errors: arm64-allmodconfig /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 5 warnings 0 mismatches : arm64-allnoconfig 152 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v7_defconfig 2 warnings 0 mismatches : x86_64-defconfig 38 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm-allnoconfig 1 warnings 0 mismatches : x86_64-allnoconfig 14 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 9 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known 1 /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known Warnings Summary: 186 8 /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] 3 /home/broonie/build/linux-stable-rt/mm/swap.c:50:30: warning: 'swapvec_lock' defined but not used [-Wunused-const-variable=] 3 /home/broonie/build/linux-stable-rt/mm/swap.c:49:30: warning: 'rotate_lock' defined but not used [-Wunused-const-variable=] 3 /home/broonie/build/linux-stable-rt/lib/radix-tree.c:97:30: warning: 'radix_tree_preloads_lock' defined but not used [-Wunused-const-variable=] 3 /home/broonie/build/linux-stable-rt/kernel/workqueue.c:333:30: warning: 'pendingb_lock' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/ipv4/tcp_ipv4.c:576:30: warning: 'tcp_sk_lock' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/ipv4/icmp.c:208:30: warning: 'icmp_sk_lock' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/core/skbuff.c:358:30: warning: 'netdev_alloc_lock' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] 2 /home/broonie/build/linux-stable-rt/kernel/cpu.c:468:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] 2 /home/broonie/build/linux-stable-rt/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 /home/broonie/build/linux-stable-rt/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 2 /home/broonie/build/linux-stable-rt/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] 2 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] 2 /home/broonie/build/linux-stable-rt/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:526:38: warning: 'wm8991_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:126:27: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:106:27: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:527:38: warning: 'wm8990_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:126:35: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:118:35: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8988.c:273:30: warning: 'wm8988_rline_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8974.c:202:38: warning: 'wm8974_mic_boost_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8974.c:198:38: warning: 'wm8974_aux_boost_controls' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8900.c:451:38: warning: 'wm8900_dapm_routput2_control' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8900.c:448:38: warning: 'wm8900_dapm_loutput2_control' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8737.c:116:30: warning: 'high_3d' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/tlv320aic23.c:56:30: warning: 'tlv320aic23_rec_src' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/ml26124.c:71:35: warning: 'ngth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:876:30: warning: 'max98090_pa2en_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:872:30: warning: 'max98090_pa1en_enum' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:389:35: warning: 'max98090_alc_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:387:35: warning: 'max98090_sidetone_tlv' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/cs42l73.c:383:38: warning: 'xsp_output_mux' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/soc/codecs/cs42l73.c:380:38: warning: 'vsp_output_mux' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/sound/pci/ac97/ac97_codec.c:613:38: warning: 'snd_ac97_controls_master_mono' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/wireless/nl80211.c:393:1: warning: 'nl80211_wowlan_tcp_policy' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/wireless/nl80211.c:380:1: warning: 'nl80211_wowlan_policy' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/net/sched/sch_choke.c:589:37: warning: 'choke_class_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/netfilter/xt_recent.c:103:37: warning: 'recent_old_fops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/mac80211/debugfs_sta.c:35:37: warning: 'sta_aid_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/mac80211/debugfs.c:70:23: warning: 'rate_ctrl_alg_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/ipv4/arp.c:152:31: warning: 'arp_broken_ops' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/net/dcb/dcbnl.c:183:32: warning: 'dcbnl_ieee_app' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/kernel/modsign_pubkey.c:28:31: warning: 'annoy_ccache' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/fs/ncpfs/dir.c:860:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/fs/fscache/object.c:34:25: warning: 'fscache_osm_CREATE_OBJECT' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/fs/cifs/netmisc.c:133:40: warning: 'mapping_table_ERRHRD' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/fs/cifs/cifsacl.c:43:30: warning: 'sid_user' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/fs/afs/cmservice.c:78:35: warning: 'afs_SRXCBProbeUuid' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/xen-fbfront.c:588:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/s6e63m0.c:331:29: warning: 'seq_elvss_off' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/s6e63m0.c:317:29: warning: 'seq_acl_off' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/lms501kf03.c:96:28: warning: 'seq_up_dn' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/lms501kf03.c:100:28: warning: 'seq_sleep_in' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:92:29: warning: 'seq_swreset' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:414:29: warning: 'seq_el_on' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:402:29: warning: 'seq_els_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:390:29: warning: 'seq_gls_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:378:29: warning: 'seq_sd_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:366:29: warning: 'seq_gam_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:356:29: warning: 'seq_vbl_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:346:29: warning: 'seq_vbh_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:334:29: warning: 'seq_vint_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:324:29: warning: 'seq_vmos_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:314:29: warning: 'seq_vgl_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:304:29: warning: 'seq_vgh_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:294:29: warning: 'seq_vreg1_amp_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:284:29: warning: 'seq_vl3_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:274:29: warning: 'seq_vci1_2nd_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:264:29: warning: 'seq_vl2_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:254:29: warning: 'seq_vl1_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:244:29: warning: 'seq_vci1_1st_en' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:212:29: warning: 'seq_pwr_ctrl' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:187:29: warning: 'seq_apon' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:205:28: warning: 'PRIVATE_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:199:28: warning: 'GARMIN_STOP_PVT_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:197:28: warning: 'GARMIN_START_PVT_REQ' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:195:28: warning: 'GARMIN_APP_LAYER_REPLY' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/gadget/nokia.c:45:19: warning: 'product_nokia' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/gadget/mv_udc_core.c:62:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/gadget/mv_u3d_core.c:39:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/usb/gadget/gmidi.c:47:19: warning: 'shortname' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/thermal/x86_pkg_temp_thermal.c:414:1: warning: no return statement in function returning non-void [-Wreturn-type] 1 /home/broonie/build/linux-stable-rt/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/usbpipe.c:174:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/usbpipe.c:115:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/mib.c:385:4: warning: this 'else' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/main_usb.c:1210:7: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/iwctl.c:1825:25: warning: 'iwctl_private_handler' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/bssdb.c:506:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8712/rtl871x_ioctl_linux.c:69:27: warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8712/ieee80211.c:78:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2190:42: warning: array subscript is above array bounds [-Warray-bounds] 1 /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2188:45: warning: iteration 14 invokes undefined behavior [-Waggressive-loop-optimizations] 1 /home/broonie/build/linux-stable-rt/drivers/staging/frontier/tranzport.c:276:2: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 /home/broonie/build/linux-stable-rt/drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 /home/broonie/build/linux-stable-rt/drivers/spi/spi-atmel.c:1461:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/spi/spi-atmel.c:1336:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] 1 /home/broonie/build/linux-stable-rt/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/regulator/pcap-regulator.c:93:27: warning: 'SW3_table' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types] 1 /home/broonie/build/linux-stable-rt/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/ti/wlcore/spi.c:321:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtlwifi/efuse.c:38:31: warning: 'RTL8712_SDIO_EFUSE_TABLE' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtlwifi/efuse.c:34:17: warning: 'MAX_PGPKT_SIZE' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c:520:17: warning: 'rtl8225z2_tx_power_ofdm' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/libertas_tf/main.c:30:19: warning: 'lbtf_driver_version' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9298:18: warning: 'papd_cal_scalars_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9231:18: warning: 'papd_comp_epsilon_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9164:18: warning: 'papd_cal_scalars_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9097:18: warning: 'papd_comp_epsilon_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c:1521:33: warning: 'dot11lcnphytbl_rx_gain_info_rev1' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:483:19: warning: 'retry_limit' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c:36:19: warning: 'brcmf_version' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/usb/r815x.c:197:33: warning: 'r8152_info' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] 1 /home/broonie/build/linux-stable-rt/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] 1 /home/broonie/build/linux-stable-rt/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/drivers/misc/bh1770glc.c:184:17: warning: 'prox_curr_ma' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/misc/apds990x.c:191:17: warning: 'ir_currents' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:94:18: warning: 'min_imgheight' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:93:18: warning: 'min_imgwidth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:92:18: warning: 'max_imgheight' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:91:18: warning: 'max_imgwidth' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/gspca/ov519.c:375:37: warning: 'ovfx2_cif_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/usb/gspca/ov519.c:363:37: warning: 'ovfx2_vga_mode' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/tuners/r820t.c:349:18: warning: 'r820t_mixer_gain_steps' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/tuners/r820t.c:345:18: warning: 'r820t_lna_gain_steps' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxk_hard.c:2223:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxd_hard.c:2695:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxd_hard.c:2635:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/dib0090.c:852:18: warning: 'rf_ramp_pwm_sband' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/dib0090.c:800:18: warning: 'bb_ramp_pwm_boost' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/input/misc/xen-kbdfront.c:257:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] 1 /home/broonie/build/linux-stable-rt/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/iio/adc/ad7793.c:449:37: warning: 'ad7797_attribute_group' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/hwmon/nct6775.c:580:18: warning: 'NCT6106_REG_TOLERANCE_H' defined but not used [-Wunused-const-variable=] 1 /home/broonie/build/linux-stable-rt/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1042:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] 1 /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:383:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:380:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:377:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] 1 /home/broonie/build/linux-stable-rt/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 /home/broonie/build/linux-stable-rt/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/swap.c:50:30: warning: 'swapvec_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/swap.c:49:30: warning: 'rotate_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/workqueue.c:333:30: warning: 'pendingb_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/lib/radix-tree.c:97:30: warning: 'radix_tree_preloads_lock' defined but not used [-Wunused-const-variable=] ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 9 errors, 152 warnings, 0 section mismatches Errors: /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl330_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__nmk_i2c_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__amba_kmi_idtable_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__mmci_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl030_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl031_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl022_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl010_ids_device_table' isn't known /home/broonie/build/linux-stable-rt/include/linux/module.h:139:40: error: storage size of '__mod_amba__pl011_ids_device_table' isn't known Warnings: /home/broonie/build/linux-stable-rt/kernel/cpu.c:468:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/mm/swap.c:50:30: warning: 'swapvec_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/swap.c:49:30: warning: 'rotate_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/workqueue.c:333:30: warning: 'pendingb_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/fs/afs/cmservice.c:78:35: warning: 'afs_SRXCBProbeUuid' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/modsign_pubkey.c:28:31: warning: 'annoy_ccache' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] /home/broonie/build/linux-stable-rt/sound/pci/ac97/ac97_codec.c:613:38: warning: 'snd_ac97_controls_master_mono' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/cs42l73.c:383:38: warning: 'xsp_output_mux' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/cs42l73.c:380:38: warning: 'vsp_output_mux' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:876:30: warning: 'max98090_pa2en_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:872:30: warning: 'max98090_pa1en_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:389:35: warning: 'max98090_alc_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/max98090.c:387:35: warning: 'max98090_sidetone_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/ml26124.c:71:35: warning: 'ngth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/lib/radix-tree.c:97:30: warning: 'radix_tree_preloads_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/tlv320aic23.c:56:30: warning: 'tlv320aic23_rec_src' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1042:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable-rt/drivers/dma/amba-pl08x.c:1694:3: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Wformat=] /home/broonie/build/linux-stable-rt/fs/cifs/netmisc.c:133:40: warning: 'mapping_table_ERRHRD' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/dma/pl330.c:2317:21: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/fs/cifs/cifsacl.c:43:30: warning: 'sid_user' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8737.c:116:30: warning: 'high_3d' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8900.c:451:38: warning: 'wm8900_dapm_routput2_control' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8900.c:448:38: warning: 'wm8900_dapm_loutput2_control' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/gpio/gpio-mcp23s08.c:643:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8974.c:202:38: warning: 'wm8974_mic_boost_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8974.c:198:38: warning: 'wm8974_aux_boost_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8988.c:273:30: warning: 'wm8988_rline_enum' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:527:38: warning: 'wm8990_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:126:35: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8990.c:118:35: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:526:38: warning: 'wm8991_dapm_rxvoice_controls' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:126:27: warning: 'out_omix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/sound/soc/codecs/wm8991.c:106:27: warning: 'rec_mix_tlv' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/core/skbuff.c:358:30: warning: 'netdev_alloc_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/fs/fscache/object.c:34:25: warning: 'fscache_osm_CREATE_OBJECT' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/iio/adc/exynos_adc.c:112:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/iio/adc/ad7793.c:449:37: warning: 'ad7797_attribute_group' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/dcb/dcbnl.c:183:32: warning: 'dcbnl_ieee_app' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/hwmon/nct6775.c:580:18: warning: 'NCT6106_REG_TOLERANCE_H' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/input/joystick/analog.c:171:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp] /home/broonie/build/linux-stable-rt/net/ipv4/tcp_ipv4.c:576:30: warning: 'tcp_sk_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/icmp.c:208:30: warning: 'icmp_sk_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/input/misc/xen-kbdfront.c:257:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable-rt/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/fs/ncpfs/dir.c:860:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxd_hard.c:2635:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxd_hard.c:2695:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/drxk_hard.c:2223:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/dib0090.c:852:18: warning: 'rf_ramp_pwm_sband' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/dvb-frontends/dib0090.c:800:18: warning: 'bb_ramp_pwm_boost' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/mfd/arizona-core.c:509:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/net/mac80211/debugfs.c:70:23: warning: 'rate_ctrl_alg_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/mac80211/debugfs_sta.c:35:37: warning: 'sta_aid_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/misc/bh1770glc.c:184:17: warning: 'prox_curr_ma' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/misc/apds990x.c:191:17: warning: 'ir_currents' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/tuners/r820t.c:349:18: warning: 'r820t_mixer_gain_steps' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/tuners/r820t.c:345:18: warning: 'r820t_lna_gain_steps' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/power/reset/xgene-reboot.c:80:17: warning: assignment from incompatible pointer type [-Wincompatible-pointer-types] /home/broonie/build/linux-stable-rt/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/net/netfilter/xt_recent.c:103:37: warning: 'recent_old_fops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/gspca/ov519.c:375:37: warning: 'ovfx2_cif_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/gspca/ov519.c:363:37: warning: 'ovfx2_vga_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/regulator/pcap-regulator.c:93:27: warning: 'SW3_table' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/regulator/tps62360-regulator.c:363:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/net/usb/r815x.c:197:33: warning: 'r8152_info' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c:36:19: warning: 'brcmf_version' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:483:19: warning: 'retry_limit' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:94:18: warning: 'min_imgheight' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:93:18: warning: 'min_imgwidth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:92:18: warning: 'max_imgheight' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/media/usb/usbvision/usbvision-core.c:91:18: warning: 'max_imgwidth' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c:1521:33: warning: 'dot11lcnphytbl_rx_gain_info_rev1' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9298:18: warning: 'papd_cal_scalars_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9231:18: warning: 'papd_comp_epsilon_tbl_core1_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9164:18: warning: 'papd_cal_scalars_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_n.c:9097:18: warning: 'papd_comp_epsilon_tbl_core0_rev3' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/libertas_tf/main.c:30:19: warning: 'lbtf_driver_version' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c:520:17: warning: 'rtl8225z2_tx_power_ofdm' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtlwifi/efuse.c:38:31: warning: 'RTL8712_SDIO_EFUSE_TABLE' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/wireless/rtlwifi/efuse.c:34:17: warning: 'MAX_PGPKT_SIZE' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/sched/sch_choke.c:589:37: warning: 'choke_class_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/spi/spi-atmel.c:1336:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/spi/spi-atmel.c:1461:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/drivers/spi/spi-pl022.c:281:31: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable-rt/drivers/net/wireless/ti/wlcore/spi.c:321:1: warning: the frame size of 9728 bytes is larger than 2048 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1387:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1426:37: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable-rt/drivers/staging/bcm/CmHost.c:1440:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /home/broonie/build/linux-stable-rt/include/linux/compiler-gcc.h:136:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] /home/broonie/build/linux-stable-rt/drivers/staging/frontier/tranzport.c:276:2: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:414:29: warning: 'seq_el_on' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:402:29: warning: 'seq_els_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:390:29: warning: 'seq_gls_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:378:29: warning: 'seq_sd_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:366:29: warning: 'seq_gam_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:356:29: warning: 'seq_vbl_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:346:29: warning: 'seq_vbh_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:334:29: warning: 'seq_vint_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:324:29: warning: 'seq_vmos_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:314:29: warning: 'seq_vgl_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:304:29: warning: 'seq_vgh_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:294:29: warning: 'seq_vreg1_amp_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:284:29: warning: 'seq_vl3_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:274:29: warning: 'seq_vci1_2nd_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:264:29: warning: 'seq_vl2_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:254:29: warning: 'seq_vl1_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:244:29: warning: 'seq_vci1_1st_en' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:212:29: warning: 'seq_pwr_ctrl' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:187:29: warning: 'seq_apon' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/ld9040.c:92:29: warning: 'seq_swreset' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/lms501kf03.c:100:28: warning: 'seq_sleep_in' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/lms501kf03.c:96:28: warning: 'seq_up_dn' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/s6e63m0.c:331:29: warning: 'seq_elvss_off' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/backlight/s6e63m0.c:317:29: warning: 'seq_acl_off' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/wireless/nl80211.c:393:1: warning: 'nl80211_wowlan_tcp_policy' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/wireless/nl80211.c:380:1: warning: 'nl80211_wowlan_policy' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/gadget/gmidi.c:47:19: warning: 'shortname' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/gadget/nokia.c:45:19: warning: 'product_nokia' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/video/xen-fbfront.c:588:57: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'long long unsigned int' [-Wformat=] /home/broonie/build/linux-stable-rt/drivers/usb/gadget/mv_udc_core.c:62:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/gadget/mv_u3d_core.c:39:19: warning: 'driver_desc' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/storage/realtek_cr.c:699:13: warning: 'fw5895_init' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/usb/storage/realtek_cr.c:629:12: warning: 'config_autodelink_before_power_down' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:205:28: warning: 'PRIVATE_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:199:28: warning: 'GARMIN_STOP_PVT_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:197:28: warning: 'GARMIN_START_PVT_REQ' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/usb/serial/garmin_gps.c:195:28: warning: 'GARMIN_APP_LAYER_REPLY' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2188:45: warning: iteration 14 invokes undefined behavior [-Waggressive-loop-optimizations] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c:2190:42: warning: array subscript is above array bounds [-Warray-bounds] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8712/rtl871x_ioctl_linux.c:69:27: warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8712/ieee80211.c:78:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/staging/rts5139/rts51x.c:204:13: warning: 'rts51x_try_to_enter_ss' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/main_usb.c:1210:7: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/bssdb.c:506:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/mib.c:385:4: warning: this 'else' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/iwctl.c:1825:25: warning: 'iwctl_private_handler' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/usbpipe.c:115:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] /home/broonie/build/linux-stable-rt/drivers/staging/vt6656/usbpipe.c:174:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/drivers/thermal/x86_pkg_temp_thermal.c:414:1: warning: no return statement in function returning non-void [-Wreturn-type] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 38 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/arch/arm/mach-cns3xxx/pcie.c:350:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:377:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:380:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable-rt/drivers/ata/pata_hpt366.c:383:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] /home/broonie/build/linux-stable-rt/fs/nfs/nfs4proc.c:2925:10: warning: switch condition has boolean value [-Wswitch-bool] /home/broonie/build/linux-stable-rt/drivers/mtd/chips/cfi_cmdset_0020.c:654:1: warning: the frame size of 1192 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/net/ethernet/amd/nmclan_cs.c:625:3: warning: 'pcmcia_request_exclusive_irq' is deprecated [-Wdeprecated-declarations] /home/broonie/build/linux-stable-rt/net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/pinctrl/pinctrl-bcm2835.c:1060:2: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/pinctrl/pinctrl-bcm2835.c:1043:3: warning: ignoring return value of 'gpiochip_remove', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/power/ab8500_charger.c:1390:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/power/ab8500_charger.c:1559:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/net/ethernet/dec/tulip/winbond-840.c:911:2: warning: #warning Processor architecture undefined [-Wcpp] /home/broonie/build/linux-stable-rt/drivers/power/pm2301_charger.c:725:4: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] /home/broonie/build/linux-stable-rt/drivers/tty/serial/efm32-uart.c:834:20: warning: 'efm32_uart_exit' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_driver.c:982:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_fep5.c:173:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_fep5.c:112:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/dgap/dgap_tty.c:664:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/dgnc/dgnc_tty.c:613:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/video/aty/radeon_pm.c:1718:13: warning: 'radeon_reinitialize_M10' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/video/omap2/displays-new/panel-sony-acx565akm.c:608:25: warning: unused variable 'ddata' [-Wunused-variable] /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:7901:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:7898:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:8517:5: warning: case value '257' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable-rt/drivers/scsi/aic7xxx_old.c:8510:5: warning: case value '513' not in enumerated type 'ahc_chip {aka enum <anonymous>}' [-Wswitch] /home/broonie/build/linux-stable-rt/drivers/scsi/ips.c:210:2: warning: #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" [-Wcpp] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:941:59: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:2629:62: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4043:54: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:4052:42: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] /home/broonie/build/linux-stable-rt/drivers/staging/sm7xxfb/sm7xxfb.c:117:19: warning: 'sm7xx_vga_setup' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/drivers/staging/vt6655/device_main.c:3257:1: warning: the frame size of 1864 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/wlan-ng/prism2fw.c:795:1: warning: the frame size of 1072 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/drivers/staging/vt6655/iwctl.c:758:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] /home/broonie/build/linux-stable-rt/Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized] ------------------------------------------------------------------------------- arm-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] ------------------------------------------------------------------------------- x86_64-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: /home/broonie/build/linux-stable-rt/kernel/cpu.c:468:13: warning: 'cpu_notify_nofail' defined but not used [-Wunused-function] /home/broonie/build/linux-stable-rt/mm/swap.c:50:30: warning: 'swapvec_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/swap.c:49:30: warning: 'rotate_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/workqueue.c:333:30: warning: 'pendingb_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/core/skbuff.c:358:30: warning: 'netdev_alloc_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/mm/slub.c:1310:6: warning: unused variable 'idx' [-Wunused-variable] /home/broonie/build/linux-stable-rt/net/core/net-sysfs.c:30:19: warning: 'fmt_long_hex' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/kernel/cgroup.c:1276:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] /home/broonie/build/linux-stable-rt/lib/radix-tree.c:97:30: warning: 'radix_tree_preloads_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/drivers/net/ethernet/smsc/smc91x.c:1899:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] /home/broonie/build/linux-stable-rt/net/ipv4/tcp_ipv4.c:576:30: warning: 'tcp_sk_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/arp.c:152:31: warning: 'arp_broken_ops' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/icmp.c:208:30: warning: 'icmp_sk_lock' defined but not used [-Wunused-const-variable=] /home/broonie/build/linux-stable-rt/net/ipv4/ping.c:1146:36: warning: 'ping_v4_seq_ops' defined but not used [-Wunused-const-variable=] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches:

8 years, 1 month

1
0
0 0

v4.4-rt build: 0 failures 0 warnings (v4.4.54-725-g85ea85d)

by Build bot for Mark Brown

Tree/Branch: v4.4-rt Git describe: v4.4.54-725-g85ea85d Commit: 85ea85d2fb Linux 4.4.60-rt73 Build Time: 87 min 2 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

next-20170411 build: 1 failures 3 warnings (next-20170411)

by Build bot for Mark Brown

Tree/Branch: next-20170411 Git describe: next-20170411 Commit: c4e7b35a33 Add linux-next specific files for 20170411 Build Time: 103 min 14 sec Passed: 9 / 10 ( 90.00 %) Failed: 1 / 10 ( 10.00 %) Errors: 1 Warnings: 3 Section Mismatches: 0 Failed defconfigs: arm64-allmodconfig Errors: arm64-allmodconfig ../mm/hmm.c:816:2: error: implicit declaration of function 'arch_remove_memory' [-Werror=implicit-function-declaration] ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 3 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v5_defconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 1 warnings 0 mismatches : x86_64-defconfig 2 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 1 1 ../mm/hmm.c:816:2: error: implicit declaration of function 'arch_remove_memory' [-Werror=implicit-function-declaration] Warnings Summary: 3 6 ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast 2 ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] 1 ../mm/hmm.c:34:0: warning: "SECTION_SIZE" redefined =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 1 errors, 3 warnings, 0 section mismatches Errors: ../mm/hmm.c:816:2: error: implicit declaration of function 'arch_remove_memory' [-Werror=implicit-function-declaration] Warnings: ../mm/hmm.c:34:0: warning: "SECTION_SIZE" redefined ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:755:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig arm-multi_v4t_defconfig

8 years, 1 month

1
0
0 0

[PATCH v2 for-lsk-v4.4] arm64: move {PAGE,CONT}_SHIFT into Kconfig

by Amit Pundir

From: Mark Rutland <mark.rutland(a)arm.com> In some cases (e.g. the awk for CONFIG_RANDOMIZE_TEXT_OFFSET) we would like to make use of PAGE_SHIFT outside of code that can include the usual header files. Add a new CONFIG_ARM64_PAGE_SHIFT for this, likewise with ARM64_CONT_SHIFT for consistency. Signed-off-by: Mark Rutland <mark.rutland(a)arm.com> Cc: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Sudeep Holla <sudeep.holla(a)arm.com> Cc: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Will Deacon <will.deacon(a)arm.com> (cherry picked from commit 030c4d24447cbf2bd612baea5695952e5f62c042) Signed-off-by: Amit Pundir <amit.pundir(a)linaro.org> --- v2: Rebased for linux-linaro-lsk-v4.4 v1: Few arm64 builds (including allmodconfig) are broken in lsk-v4.4 and family, due to missing definition of CONFIG_ARM64_PAGE_SHIFT in arch/arm64/Makefile, while running awk command. This upstream cherry-pick fix those build failures. arch/arm64/Kconfig | 12 ++++++++++++ arch/arm64/include/asm/page.h | 12 ++---------- 2 files changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b730b9e..82bff57 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -112,6 +112,18 @@ config ARCH_PHYS_ADDR_T_64BIT config MMU def_bool y +config ARM64_PAGE_SHIFT + int + default 16 if ARM64_64K_PAGES + default 14 if ARM64_16K_PAGES + default 12 + +config ARM64_CONT_SHIFT + int + default 5 if ARM64_64K_PAGES + default 7 if ARM64_16K_PAGES + default 4 + config NO_IOPORT_MAP def_bool y if !PCI diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h index fbafd0a..fb2617d 100644 --- a/arch/arm64/include/asm/page.h +++ b/arch/arm64/include/asm/page.h @@ -23,16 +23,8 @@ /* PAGE_SHIFT determines the page size */ /* CONT_SHIFT determines the number of pages which can be tracked together */ -#ifdef CONFIG_ARM64_64K_PAGES -#define PAGE_SHIFT 16 -#define CONT_SHIFT 5 -#elif defined(CONFIG_ARM64_16K_PAGES) -#define PAGE_SHIFT 14 -#define CONT_SHIFT 7 -#else -#define PAGE_SHIFT 12 -#define CONT_SHIFT 4 -#endif +#define PAGE_SHIFT CONFIG_ARM64_PAGE_SHIFT +#define CONT_SHIFT CONFIG_ARM64_CONT_SHIFT #define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) -- 2.7.4

8 years, 1 month

2
1
0 0

master build: 0 failures 0 warnings (v4.11-rc6-4-gc08e611)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc6-4-gc08e611 Commit: c08e611b7d Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Build Time: 112 min 46 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 1 month

1
0
0 0

[PATCH for-lsk-v4.4] arm64: move {PAGE,CONT}_SHIFT into Kconfig

by Amit Pundir

From: Mark Rutland <mark.rutland(a)arm.com> In some cases (e.g. the awk for CONFIG_RANDOMIZE_TEXT_OFFSET) we would like to make use of PAGE_SHIFT outside of code that can include the usual header files. Add a new CONFIG_ARM64_PAGE_SHIFT for this, likewise with ARM64_CONT_SHIFT for consistency. Signed-off-by: Mark Rutland <mark.rutland(a)arm.com> Cc: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Sudeep Holla <sudeep.holla(a)arm.com> Cc: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Will Deacon <will.deacon(a)arm.com> (cherry picked from commit 030c4d24447cbf2bd612baea5695952e5f62c042) Signed-off-by: Amit Pundir <amit.pundir(a)linaro.org> --- Few arm64 builds (including allmodconfig) are broken in lsk-v4.4 and family, due to missing definition of CONFIG_ARM64_PAGE_SHIFT in arch/arm64/Makefile, while running awk command. This upstream cherry-pick fix those build failures. arch/arm64/Kconfig | 12 ++++++++++++ arch/arm64/include/asm/page.h | 12 ++---------- 2 files changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index bf87f37..ba16dae 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -114,6 +114,18 @@ config ARCH_PHYS_ADDR_T_64BIT config MMU def_bool y +config ARM64_PAGE_SHIFT + int + default 16 if ARM64_64K_PAGES + default 14 if ARM64_16K_PAGES + default 12 + +config ARM64_CONT_SHIFT + int + default 5 if ARM64_64K_PAGES + default 7 if ARM64_16K_PAGES + default 4 + config ARCH_MMAP_RND_BITS_MIN default 14 if ARM64_64K_PAGES default 16 if ARM64_16K_PAGES diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h index fbafd0a..fb2617d 100644 --- a/arch/arm64/include/asm/page.h +++ b/arch/arm64/include/asm/page.h @@ -23,16 +23,8 @@ /* PAGE_SHIFT determines the page size */ /* CONT_SHIFT determines the number of pages which can be tracked together */ -#ifdef CONFIG_ARM64_64K_PAGES -#define PAGE_SHIFT 16 -#define CONT_SHIFT 5 -#elif defined(CONFIG_ARM64_16K_PAGES) -#define PAGE_SHIFT 14 -#define CONT_SHIFT 7 -#else -#define PAGE_SHIFT 12 -#define CONT_SHIFT 4 -#endif +#define PAGE_SHIFT CONFIG_ARM64_PAGE_SHIFT +#define CONT_SHIFT CONFIG_ARM64_CONT_SHIFT #define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) -- 2.7.4

8 years, 1 month

2
4
0 0

[GIT PULL] [lsk-v3.18-android] linaro-android v3.18 topic branch updates

by Amit Pundir

Hi Alex, Mark, Please consider following linaro-android pull request for "linux-linaro-lsk-v3.18-android" LSK branch. KernelCI link is down so build tested locally for arm(vexpress defconfig + android configs), and arm64(defconfig + android configs). Boot tested on Qemu(vexpress defconfig + android config fragments) + Android M userspace. Also fixed few lsk-v3.18-android build errors reported on KernelCI last time. Regards, Amit Pundir The following changes since commit 1203868ffa16d93234dc005fba95b6596b87ddb5: Merge branch 'linux-linaro-lsk-v3.18' into linux-linaro-lsk-v3.18-android (2017-02-09 16:21:25 +0800) are available in the git repository at: git://android.git.linaro.org/kernel/linaro-android lsk-v3.18-android for you to fetch changes up to a9cc70977784f91accde7515f58a90f5b47a1d30: UPSTREAM: ARM: 8408/1: Fix the secondary_startup function in Big Endian case (2017-04-10 17:51:05 +0530) ---------------------------------------------------------------- Adrien Schildknecht (5): Squashfs: remove the FILE_CACHE option Squashfs: refactor page_actor Squashfs: replace buffer_head with BIO Squashfs: implement .readpages() Squashfs: optimize reading uncompressed data Amit Pundir (15): ANDROID: binder: fix format specifier for type binder_size_t Revert "net: sysctl_net_core: Fix warning: 'one' defined but not used" ANDROID: base-cfg: enable CONFIG_IP_NF_NAT Revert "Don't kill IPv4 sockets when killing IPv6 sockets was requested." Revert "net: fix crash in tcp_nuke_addr()" Revert "net: fix iterating over hashtable in tcp_nuke_addr()" Revert "tcp: Fix build error if IPV6 is not selected" Revert "net: tcp: fix rtable leak in tcp_is_local[6]" Revert "export tcp_nuke_addr to build ipv6 as module" Revert "tcp: Silence warning: ‘in’ may be used uninitialized" Revert "net: socket ioctl to reset connections matching local address" Revert "panic: Add board ID to panic output" Revert "arm: dcc_tty: fix armv6 dcc tty build failure" Revert "[ARM] armv6 dcc tty driver" arm: vdso: Rename timekeeper::tkr to timekeeper::tkr_mono Anson Jacob (1): usb: gadget: f_accessory: Fix for UsbAccessory clean unbind. Anurag Singh (1): input: evdev: Move wake_lock_destroy call Arnd Bergmann (1): UPSTREAM: arm64: build vdso without libgcov Baruch Siach (1): crypto: arm - ignore generated SHA2 assembly files Borislav Petkov (1): config/android: Remove CONFIG_IPV6_PRIVACY Bowgo Tsai (1): ANDROID: dm: android-verity: allow disable dm-verity for Treble VTS Chen Gang (1): UPSTREAM: mm: add PHYS_PFN, use it in __phys_to_pfn() Chenbo Feng (1): ANDROID: fix the deadlock in xt_qtaguid when enable DDEBUG Chris Redpath (1): cpufreq: interactive governor drops bits in time calculation Christoph Hellwig (1): UPSTREAM: mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h Daniel Rosenberg (31): ANDROID: sdcardfs: Fix incorrect hash ANDROID: sdcardfs: Add missing path_put ANDROID: sdcardfs: Don't bother deleting freelist ANDROID: sdcardfs: implement vm_ops->page_mkwrite ANDROID: sdcardfs: support direct-IO (DIO) operations ANDROID: sdcardfs: Fix case insensitive lookup ANDROID: sdcardfs: rate limit warning print ANDROID: sdcardfs: Replace get/put with d_lock ANDROID: sdcardfs: Use spin_lock_nested ANDROID: sdcardfs: Switch to internal case insensitive compare ANDROID: sdcardfs: Use d_invalidate instead of drop_recurisve ANDROID: sdcardfs: Get the blocksize from the lower fs ANDROID: sdcardfs: declare MODULE_ALIAS_FS ANDROID: sdcardfs: Use case insensitive hash function ANDROID: sdcardfs: move path_put outside of spinlock ANDROID: sdcardfs: Remove uninformative prints ANDROID: sdcardfs: Use tabs instead of spaces in multiuser.h ANDROID: sdcardfs: Fix gid issue ANDROID: sdcardfs: correct order of descriptors ANDROID: sdcardfs: Fix formatting ANDROID: sdcardfs: Fix style issues with comments ANDROID: sdcardfs: remove unneeded null check ANDROID: sdcardfs: Use pr_[...] instead of printk ANDROID: sdcardfs: Use to kstrout ANDROID: sdcardfs: Use seq_puts over seq_printf ANDROID: sdcardfs: Fix style issues in macros ANDROID: sdcardfs: remove unnecessary call to do_munmap ANDROID: sdcardfs: copy lower inode attributes in ->ioctl ANDROID: sdcardfs: fix ->llseek to update upper and lower offset ANDROID: sdcardfs: add read_iter/write_iter opeations ANDROID: sdcardfs: use d_splice_alias Dmitry Shmidt (1): android: base-cfg: Add CONFIG_INET_DIAG_DESTROY Greg Hackmann (1): ANDROID: sched: fix duplicate sched_group_energy const specifiers Greg Kroah-Hartman (4): ANDROID: android-base.cfg: properly sort the file ANDROID: android-base.cfg: add CONFIG_IKCONFIG option ANDROID: android-base.cfg: add CONFIG_MODULES option ANDROID: android-base.cfg: enable UID_SYS_STATS Gregory CLEMENT (1): UPSTREAM: ARM: 8408/1: Fix the secondary_startup function in Big Endian case Jin Qian (10): ANDROID: uid_cputime: add per-uid IO usage accounting ANDROID: uid_sys_stats: rename uid_cputime.c to uid_sys_stats.c ANDROID: uid_sys_stats: allow writing same state ANDROID: uid_sys_stats: return full size when state is not changed. ANDROID: uid_sys_stats: remove unnecessary code in procstat switch ANDROID: uid_sys_stats: fix negative write bytes. ANDROID: sched: add a counter to track fsync ANDROID: uid_sys_stats: account for fsync syscalls uid_sys_stats: fix typo in init ANDROID: mmc: core: export emmc revision Jisheng Zhang (3): UPSTREAM: ARM: 8597/1: VDSO: put RO and RO after init objects into proper sections UPSTREAM: arm64: vdso: add __init section marker to alloc_vectors_page UPSTREAM: arm64: vdso: constify vm_special_mapping used for aarch32 vectors page Joel Scherpelz (1): net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs. Jungseung Lee (1): BACKPORT: mmc: core: Export device lifetime information through sysfs Kees Cook (1): net: ping: check minimum size on ICMP header length Kevin Brodsky (3): BACKPORT: arm64: fix vdso-offsets.h dependency UPSTREAM: arm64: Refactor vDSO time functions UPSTREAM: arm64: Add support for CLOCK_MONOTONIC_RAW in clock_gettime() vDSO Lianwei Wang (1): Revert "drivers: power: Add watchdog timer to catch drivers which lockup during suspend." Lisa Du (1): UPSTREAM: drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE Maciej Żenczykowski (1): UPSTREAM: ipv6 addrconf: implement RFC7559 router solicitation backoff Martijn Coenen (4): binder: use group leader instead of open thread android: binder: add padding to binder_fd_array_object. android: binder: move global binder state into context struct. ANDROID: binder: add hwbinder,vndbinder to BINDER_DEVICES. Masahiro Yamada (1): UPSTREAM: kbuild: drop FORCE from PHONY targets Max Shi (1): config: disable CONFIG_USELIB and CONFIG_FHANDLE Michael Halcrow (1): ANDROID: ext4 crypto: Disables zeroing on truncation when there's no key Min Chong (1): netfilter: Change %p to %pK in debug messages Mohan Srinivasan (2): ANDROID: Refactor fs readpage/write tracepoints. ANDROID: Replace spaces by '_' for some android filesystem tracepoints. Nathan Lynch (11): UPSTREAM: ARM: 8329/1: miscellaneous vdso infrastructure, preparation UPSTREAM: ARM: 8330/1: add VDSO user-space code BACKPORT: ARM: 8331/1: VDSO initialization, mapping, and synchronization UPSTREAM: ARM: 8332/1: add CONFIG_VDSO Kconfig and Makefile bits UPSTREAM: ARM: 8342/1: VDSO: depend on CPU_V7 UPSTREAM: ARM: 8343/1: VDSO: add build artifacts to .gitignore UPSTREAM: ARM: 8344/1: VDSO: honor CONFIG_VDSO in Makefile UPSTREAM: ARM: 8385/1: VDSO: group link options UPSTREAM: ARM: 8384/1: VDSO: force use of BFD linker UPSTREAM: ARM: 8405/1: VDSO: fix regression with toolchains lacking ld.bfd executable UPSTREAM: ARM: 8410/1: VDSO: fix coarse clock monotonicity regression Pavel Labath (1): BACKPORT: arm64: hw_breakpoint: Handle inexact watchpoint addresses Peter Hurley (1): BACKPORT: n_tty: Fix unordered accesses to lockless read buffer Peter Zijlstra (4): perf: Tighten (and fix) the grouping condition BACKPORT: perf: Fix event->ctx locking BACKPORT: time: Rename timekeeper::tkr to timekeeper::tkr_mono BACKPORT: time: Add timerkeeper::tkr_raw Prasanna Karthik (1): UPSTREAM: ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check Pratyush Anand (3): BACKPORT: hw_breakpoint: Allow watchpoint of length 3,5,6 and 7 UPSTREAM: arm64: Allow hw watchpoint at varied offset from base address UPSTREAM: arm64: Allow hw watchpoint of length 3,5,6 and 7 Rob Herring (2): config: android: move device mapper options to recommended config: android: set SELinux as default security mode Rohit kumar (1): UPSTREAM staging: ion: Fix error handling in ion_buffer_create Russell King (1): BACKPORT: ARM: re-implement physical address space switching Sami Tolvanen (1): ANDROID: android-recommended.cfg: CONFIG_CPU_SW_DOMAIN_PAN=y Seung-Woo Kim (1): UPSTREAM: regulator: core: Fix regualtor_ena_gpio_free not to access pin after freeing Subash Abhinov Kasiviswanathan (1): misc: uidstat: change release handler for stat read operation Takashi Iwai (1): ALSA: pcm : Call kill_fasync() in stream lock Tyler Baker (1): UPSTREAM: mm: fix type cast in __pfn_to_phys() Wei Wang (1): uid_sys_stats: change to use rt_mutex yangdongdong (1): power: align wakeup_sources format Documentation/networking/ip-sysctl.txt | 13 ++- Makefile | 8 +- android/configs/android-base.cfg | 19 +++-- android/configs/android-recommended.cfg | 6 +- arch/arm/Makefile | 8 ++ arch/arm/crypto/.gitignore | 2 + arch/arm/include/asm/Kbuild | 1 - arch/arm/include/asm/auxvec.h | 1 + arch/arm/include/asm/elf.h | 9 ++ arch/arm/include/asm/memory.h | 6 -- arch/arm/include/asm/mmu.h | 3 + arch/arm/include/asm/vdso.h | 32 +++++++ arch/arm/include/asm/vdso_datapage.h | 60 +++++++++++++ arch/arm/include/uapi/asm/Kbuild | 1 + arch/arm/include/uapi/asm/auxvec.h | 7 ++ arch/arm/kernel/Makefile | 1 + arch/arm/kernel/asm-offsets.c | 5 ++ arch/arm/kernel/head.S | 3 + arch/arm/kernel/process.c | 17 +++- arch/arm/kernel/vdso.c | 337 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mm/Kconfig | 18 ++++ arch/arm/mm/Makefile | 1 + arch/arm/mm/mmu.c | 124 +++++++++------------------ arch/arm/mm/pv-fixup-asm.S | 88 +++++++++++++++++++ arch/arm/vdso/.gitignore | 3 + arch/arm/vdso/Makefile | 78 +++++++++++++++++ arch/arm/vdso/datapage.S | 15 ++++ arch/arm/vdso/vdso.S | 35 ++++++++ arch/arm/vdso/vdso.lds.S | 87 +++++++++++++++++++ arch/arm/vdso/vdsomunge.c | 201 +++++++++++++++++++++++++++++++++++++++++++ arch/arm/vdso/vgettimeofday.c | 282 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm64/Makefile | 10 +++ arch/arm64/include/asm/hw_breakpoint.h | 6 +- arch/arm64/include/asm/memory.h | 6 -- arch/arm64/include/asm/vdso_datapage.h | 8 +- arch/arm64/kernel/Makefile | 4 - arch/arm64/kernel/asm-offsets.c | 6 +- arch/arm64/kernel/hw_breakpoint.c | 153 ++++++++++++++++++++++++--------- arch/arm64/kernel/ptrace.c | 7 +- arch/arm64/kernel/vdso.c | 20 +++-- arch/arm64/kernel/vdso/Makefile | 10 ++- arch/arm64/kernel/vdso/gettimeofday.S | 331 +++++++++++++++++++++++++++++++++++++++++++--------------------------- arch/ia64/Makefile | 4 +- arch/s390/kernel/time.c | 18 ++-- arch/tile/kernel/time.c | 24 +++--- arch/unicore32/include/asm/memory.h | 6 -- arch/x86/kernel/vsyscall_gtod.c | 24 +++--- arch/x86/kvm/x86.c | 14 +-- arch/x86/vdso/Makefile | 4 +- drivers/base/power/main.c | 43 ---------- drivers/base/power/wakeup.c | 4 +- drivers/char/Kconfig | 4 - drivers/char/Makefile | 1 - drivers/char/dcc_tty.c | 326 --------------------------------------------------------------------- drivers/cpufreq/cpufreq_interactive.c | 8 +- drivers/input/evdev.c | 2 +- drivers/md/dm-android-verity.c | 53 ++++++++---- drivers/misc/Kconfig | 5 +- drivers/misc/Makefile | 2 +- drivers/misc/uid_cputime.c | 254 ------------------------------------------------------ drivers/misc/uid_stat.c | 2 +- drivers/misc/uid_sys_stats.c | 477 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/core/mmc.c | 16 ++++ drivers/regulator/core.c | 2 + drivers/staging/android/Kconfig | 2 +- drivers/staging/android/binder.c | 402 +++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------ drivers/staging/android/ion/ion.c | 15 ++-- drivers/staging/android/uapi/binder.h | 2 + drivers/tty/n_tty.c | 58 ++++++------- drivers/usb/gadget/function/f_accessory.c | 22 +++-- fs/ext4/inline.c | 12 ++- fs/ext4/inode.c | 49 +++++++++-- fs/ext4/readpage.c | 6 ++ fs/f2fs/data.c | 33 +++++-- fs/f2fs/inline.c | 13 ++- fs/mpage.c | 6 ++ fs/sdcardfs/dentry.c | 41 +++------ fs/sdcardfs/derived_perm.c | 338 +++++++++++++++++++++++++++++++++++------------------------------------- fs/sdcardfs/file.c | 98 +++++++++++++++++---- fs/sdcardfs/inode.c | 110 ++++++++++-------------- fs/sdcardfs/lookup.c | 167 ++++++++++++++++++++++++------------ fs/sdcardfs/main.c | 82 +++++++++--------- fs/sdcardfs/mmap.c | 55 ++++++++---- fs/sdcardfs/multiuser.h | 23 ++--- fs/sdcardfs/packagelist.c | 89 +++++++++++-------- fs/sdcardfs/sdcardfs.h | 139 ++++++++++++++++-------------- fs/sdcardfs/super.c | 39 +++++---- fs/squashfs/Kconfig | 28 ------ fs/squashfs/Makefile | 3 +- fs/squashfs/block.c | 545 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------- fs/squashfs/cache.c | 73 +++++++--------- fs/squashfs/decompressor.c | 55 ++++++------ fs/squashfs/file.c | 140 ++++++++++++++++++++++-------- fs/squashfs/file_cache.c | 38 --------- fs/squashfs/file_direct.c | 243 ++++++++++++++++++++++++---------------------------- fs/squashfs/lz4_wrapper.c | 32 ++----- fs/squashfs/lzo_wrapper.c | 40 ++------- fs/squashfs/page_actor.c | 175 ++++++++++++++++++++++++------------- fs/squashfs/page_actor.h | 82 +++++++----------- fs/squashfs/squashfs.h | 11 ++- fs/squashfs/squashfs_fs_sb.h | 2 +- fs/squashfs/super.c | 7 ++ fs/squashfs/xz_wrapper.c | 19 ++++- fs/squashfs/zlib_wrapper.c | 18 +++- fs/sync.c | 1 + include/asm-generic/memory_model.h | 8 ++ include/linux/ipv6.h | 2 + include/linux/kernel.h | 4 - include/linux/mmc/card.h | 3 + include/linux/mmc/mmc.h | 3 + include/linux/perf_event.h | 6 -- include/linux/pfn.h | 1 + include/linux/sched.h | 8 ++ include/linux/task_io_accounting.h | 2 + include/linux/task_io_accounting_ops.h | 1 + include/linux/timekeeper_internal.h | 16 ++-- include/net/addrconf.h | 3 +- include/net/if_inet6.h | 1 + include/net/tcp.h | 2 - include/trace/events/android_fs.h | 44 ++++++++-- include/trace/events/android_fs_template.h | 37 +++----- include/uapi/linux/hw_breakpoint.h | 4 + include/uapi/linux/ipv6.h | 14 +++ include/uapi/linux/sockios.h | 1 - include/uapi/linux/sysctl.h | 1 + kernel/events/core.c | 259 ++++++++++++++++++++++++++++++++++++++++++++++--------- kernel/panic.c | 8 -- kernel/sched/fair.c | 2 +- kernel/sched/sched.h | 2 +- kernel/time/timekeeping.c | 180 +++++++++++++++++++------------------- net/core/sysctl_net_core.c | 1 + net/ipv4/af_inet.c | 1 - net/ipv4/devinet.c | 8 +- net/ipv4/ping.c | 4 + net/ipv4/tcp.c | 127 --------------------------- net/ipv6/addrconf.c | 61 +++++++++++-- net/ipv6/af_inet6.c | 17 ---- net/ipv6/ndisc.c | 2 + net/netfilter/nf_conntrack_core.c | 16 ++-- net/netfilter/xt_qtaguid.c | 24 +++--- sound/core/pcm_lib.c | 2 +- 141 files changed, 4779 insertions(+), 2734 deletions(-) mode change 100644 => 100755 arch/arm/Makefile create mode 100644 arch/arm/include/asm/auxvec.h create mode 100644 arch/arm/include/asm/vdso.h create mode 100644 arch/arm/include/asm/vdso_datapage.h create mode 100644 arch/arm/include/uapi/asm/auxvec.h create mode 100644 arch/arm/kernel/vdso.c create mode 100644 arch/arm/mm/pv-fixup-asm.S create mode 100644 arch/arm/vdso/.gitignore create mode 100644 arch/arm/vdso/Makefile create mode 100644 arch/arm/vdso/datapage.S create mode 100644 arch/arm/vdso/vdso.S create mode 100644 arch/arm/vdso/vdso.lds.S create mode 100644 arch/arm/vdso/vdsomunge.c create mode 100644 arch/arm/vdso/vgettimeofday.c delete mode 100644 drivers/char/dcc_tty.c delete mode 100644 drivers/misc/uid_cputime.c create mode 100644 drivers/misc/uid_sys_stats.c delete mode 100644 fs/squashfs/file_cache.c

8 years, 1 month

2
1
0 0

[GIT PULL] [lsk-v4.4-android] linaro-android v4.4 topic branch updates

by Amit Pundir

Hi Alex, Mark, Please consider following linaro-android pull request for "linux-linaro-lsk-v4.4-android" LSK branch. Also submitted a relevant arm64 build fix for lsk-v4.4 earlier today https://lists.linaro.org/pipermail/linaro-kernel/2017-April/029152.html KernelCI link for linaro-android kernels are still down so build tested locally for arm(allmodconfig), and x86_64(allmodconfig). arm64(allmodconfig) build resulted in known arm64-hibernate build error. Boot tested on Qemu(vexpress defconfig + android config fragments) + Android M userspace. Regards, Amit Pundir The following changes since commit f75c8ea7d10c66cda333ce8a2400f2bdf07d1523: Merge branch 'linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4-android (2017-04-09 12:01:26 +0800) are available in the git repository at: git://android.git.linaro.org/kernel/linaro-android:lsk-v4.4-android for you to fetch changes up to 9221207894a7a76936bf67c35d81057ea9cd97fa: ANDROID: sdcardfs: update module info (2017-04-10 13:30:46 +0530) ---------------------------------------------------------------- Adrien Schildknecht (5): Squashfs: remove the FILE_CACHE option Squashfs: refactor page_actor Squashfs: replace buffer_head with BIO Squashfs: implement .readpages() Squashfs: optimize reading uncompressed data Alex Cope (3): UPSTREAM: crypto: gf128mul - Zero memory when freeing multiplication table ANDROID: crypto: gf128mul - Add ble multiplication functions ANDROID: crypto: heh - Add Hash-Encrypt-Hash (HEH) algorithm Anson Jacob (2): ANDROID: usb: gadget: function: Fix commenting style usb: gadget: f_accessory: Fix for UsbAccessory clean unbind. Badhri Jagan Sridharan (1): ANDROID: android-verity: do not compile as independent module Borislav Petkov (1): UPSTREAM: config/android: Remove CONFIG_IPV6_PRIVACY Bowgo Tsai (1): ANDROID: dm: android-verity: allow disable dm-verity for Treble VTS Chen Gang (1): UPSTREAM: mm: add PHYS_PFN, use it in __phys_to_pfn() Chenbo Feng (1): fix the deadlock in xt_qtaguid when enable DDEBUG Chris Redpath (2): cpufreq: interactive governor drops bits in time calculation DTB: Add EAS compatible Juno Energy model to 'juno.dts' Cong Wang (1): FROMLIST: 9p: fix a potential acl leak Daniel Rosenberg (33): ANDROID: sdcardfs: Fix incorrect hash ANDROID: sdcardfs: Add missing path_put ANDROID: sdcardfs: Don't bother deleting freelist ANDROID: sdcardfs: implement vm_ops->page_mkwrite ANDROID: sdcardfs: support direct-IO (DIO) operations ANDROID: sdcardfs: Fix case insensitive lookup ANDROID: sdcardfs: rate limit warning print ANDROID: sdcardfs: Replace get/put with d_lock ANDROID: sdcardfs: Use spin_lock_nested ANDROID: sdcardfs: Switch to internal case insensitive compare ANDROID: sdcardfs: Use d_invalidate instead of drop_recurisve ANDROID: sdcardfs: Get the blocksize from the lower fs ANDROID: sdcardfs: declare MODULE_ALIAS_FS ANDROID: sdcardfs: Use case insensitive hash function ANDROID: sdcardfs: move path_put outside of spinlock ANDROID: sdcardfs: Remove uninformative prints ANDROID: sdcardfs: Use tabs instead of spaces in multiuser.h ANDROID: sdcardfs: Fix gid issue ANDROID: vfs: user permission2 in notify_change2 ANDROID: sdcardfs: correct order of descriptors ANDROID: sdcardfs: Fix formatting ANDROID: sdcardfs: Fix style issues with comments ANDROID: sdcardfs: remove unneeded null check ANDROID: sdcardfs: Use pr_[...] instead of printk ANDROID: sdcardfs: Use to kstrout ANDROID: sdcardfs: Use seq_puts over seq_printf ANDROID: sdcardfs: Fix style issues in macros ANDROID: sdcardfs: remove unnecessary call to do_munmap ANDROID: sdcardfs: copy lower inode attributes in ->ioctl ANDROID: sdcardfs: fix ->llseek to update upper and lower offset ANDROID: sdcardfs: add read_iter/write_iter opeations ANDROID: sdcardfs: use d_splice_alias ANDROID: sdcardfs: update module info Dmitry Shmidt (1): ANDROID: ARM64: Allow to choose appended kernel image Eric Biggers (7): ANDROID: crypto: allow blkcipher walks over ablkcipher data ANDROID: crypto: shash - Add crypto_grab_shash() and crypto_spawn_shash_alg() ANDROID: crypto: gf128mul - Refactor gf128 overflow macros and tables ANDROID: crypto: heh - factor out poly_hash algorithm ANDROID: arm64/crypto: add ARMv8-CE optimized poly_hash algorithm ANDROID: ext4: allow encrypting filenames using HEH algorithm ANDROID: ext4: add a non-reversible key derivation method Greg Hackmann (2): ANDROID: dm: android-verity: fix table_make_digest() error handling ANDROID: sched: fix duplicate sched_group_energy const specifiers Greg Kroah-Hartman (4): ANDROID: sort android-recommended.cfg ANDROID: android-base.cfg: properly sort the file ANDROID: android-base.cfg: add CONFIG_IKCONFIG option ANDROID: android-base.cfg: add CONFIG_MODULES option Jeremy Linton (1): UPSTREAM: arm/arm64: crypto: assure that ECB modes don't require an IV Jin Qian (7): ANDROID: uid_cputime: add per-uid IO usage accounting ANDROID: uid_sys_stats: rename uid_cputime.c to uid_sys_stats.c ANDROID: uid_sys_stats: allow writing same state ANDROID: uid_sys_stats: fix negative write bytes. ANDROID: sched: add a counter to track fsync ANDROID: uid_sys_stats: account for fsync syscalls ANDROID: mmc: core: export emmc revision Jisheng Zhang (3): UPSTREAM: ARM: 8597/1: VDSO: put RO and RO after init objects into proper sections UPSTREAM: arm64: vdso: add __init section marker to alloc_vectors_page UPSTREAM: arm64: vdso: constify vm_special_mapping used for aarch32 vectors page Joel Scherpelz (1): net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs. Jon Medhurst (Tixy) (1): arm64: dts: juno: Add idle-states to device tree Jungseung Lee (1): BACKPORT: mmc: core: Export device lifetime information through sysfs Kevin Brodsky (3): UPSTREAM: arm64: fix vdso-offsets.h dependency UPSTREAM: arm64: Refactor vDSO time functions UPSTREAM: arm64: Add support for CLOCK_MONOTONIC_RAW in clock_gettime() vDSO Lorenzo Colitti (1): android: base-cfg: enable CONFIG_INET_DIAG_DESTROY Maciej Żenczykowski (1): UPSTREAM: ipv6 addrconf: implement RFC7559 router solicitation backoff Martijn Coenen (4): binder: use group leader instead of open thread android: binder: add padding to binder_fd_array_object. android: binder: move global binder state into context struct. ANDROID: binder: add hwbinder,vndbinder to BINDER_DEVICES. Masahiro Yamada (1): UPSTREAM: kbuild: drop FORCE from PHONY targets Max Shi (1): config: disable CONFIG_USELIB and CONFIG_FHANDLE Mohan Srinivasan (2): ANDROID: Refactor fs readpage/write tracepoints. ANDROID: Replace spaces by '_' for some android filesystem tracepoints. Pavel Labath (1): BACKPORT: arm64: hw_breakpoint: Handle inexact watchpoint addresses Prasanna Karthik (1): UPSTREAM: ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check Pratyush Anand (3): BACKPORT: hw_breakpoint: Allow watchpoint of length 3,5,6 and 7 UPSTREAM: arm64: Allow hw watchpoint at varied offset from base address UPSTREAM: arm64: Allow hw watchpoint of length 3,5,6 and 7 Rob Herring (2): config: android: move device mapper options to recommended UPSTREAM: config: android: set SELinux as default security mode Sami Tolvanen (1): ANDROID: android-recommended.cfg: CONFIG_CPU_SW_DOMAIN_PAN=y Subash Abhinov Kasiviswanathan (2): nf: IDLETIMER: Fix use after free condition during work nf: IDLETIMER: Use fullsock when querying uid Wei Wang (1): uid_sys_stats: change to use rt_mutex yangdongdong (1): ANDROID: power: align wakeup_sources format Documentation/networking/ip-sysctl.txt | 13 +- Makefile | 8 +- android/configs/android-base.cfg | 27 +-- android/configs/android-recommended.cfg | 9 +- arch/arm/crypto/aes-ce-glue.c | 4 +- arch/arm/kernel/vdso.c | 13 +- arch/arm/vdso/Makefile | 2 +- arch/arm64/Kconfig | 20 +++ arch/arm64/Makefile | 12 +- arch/arm64/boot/dts/arm/juno-r1.dts | 28 +++ arch/arm64/boot/dts/arm/juno-sched-energy.dtsi | 147 ++++++++++++++++ arch/arm64/boot/dts/arm/juno.dts | 36 ++++ arch/arm64/crypto/Kconfig | 5 + arch/arm64/crypto/Makefile | 3 + arch/arm64/crypto/aes-glue.c | 4 +- arch/arm64/crypto/poly-hash-ce-core.S | 163 ++++++++++++++++++ arch/arm64/crypto/poly-hash-ce-glue.c | 166 ++++++++++++++++++ arch/arm64/include/asm/hw_breakpoint.h | 6 +- arch/arm64/include/asm/vdso_datapage.h | 8 +- arch/arm64/kernel/Makefile | 4 - arch/arm64/kernel/asm-offsets.c | 6 +- arch/arm64/kernel/hw_breakpoint.c | 153 ++++++++++++----- arch/arm64/kernel/ptrace.c | 7 +- arch/arm64/kernel/vdso.c | 12 +- arch/arm64/kernel/vdso/Makefile | 7 +- arch/arm64/kernel/vdso/gettimeofday.S | 331 ++++++++++++++++++++++-------------- arch/ia64/Makefile | 4 +- arch/x86/entry/vdso/Makefile | 4 +- crypto/Kconfig | 18 ++ crypto/Makefile | 1 + crypto/blkcipher.c | 21 +++ crypto/gf128mul.c | 171 +++++++++++++++---- crypto/heh.c | 1033 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ crypto/shash.c | 8 + crypto/testmgr.c | 15 ++ crypto/testmgr.h | 194 +++++++++++++++++++++ drivers/android/Kconfig | 2 +- drivers/android/binder.c | 398 ++++++++++++++++++++++++++++--------------- drivers/base/power/wakeup.c | 4 +- drivers/cpufreq/cpufreq_interactive.c | 8 +- drivers/md/Kconfig | 6 +- drivers/md/dm-android-verity.c | 55 ++++-- drivers/misc/Kconfig | 6 +- drivers/misc/Makefile | 2 +- drivers/misc/uid_cputime.c | 240 -------------------------- drivers/misc/uid_sys_stats.c | 463 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/core/mmc.c | 14 ++ drivers/usb/gadget/function/f_accessory.c | 37 ++-- fs/9p/acl.c | 2 + fs/attr.c | 2 +- fs/ext4/Kconfig | 1 + fs/ext4/crypto_fname.c | 3 +- fs/ext4/crypto_key.c | 101 ++++++++++- fs/ext4/ext4.h | 1 + fs/ext4/ext4_crypto.h | 4 + fs/ext4/inline.c | 12 +- fs/ext4/inode.c | 45 ++++- fs/ext4/readpage.c | 6 + fs/f2fs/data.c | 34 +++- fs/f2fs/inline.c | 13 +- fs/mpage.c | 6 + fs/sdcardfs/dentry.c | 41 ++--- fs/sdcardfs/derived_perm.c | 338 ++++++++++++++++++------------------ fs/sdcardfs/file.c | 98 +++++++++-- fs/sdcardfs/inode.c | 110 ++++++------ fs/sdcardfs/lookup.c | 167 ++++++++++++------ fs/sdcardfs/main.c | 95 ++++++----- fs/sdcardfs/mmap.c | 55 ++++-- fs/sdcardfs/multiuser.h | 23 +-- fs/sdcardfs/packagelist.c | 86 ++++++---- fs/sdcardfs/sdcardfs.h | 135 ++++++++------- fs/sdcardfs/super.c | 39 +++-- fs/squashfs/Kconfig | 28 --- fs/squashfs/Makefile | 3 +- fs/squashfs/block.c | 546 +++++++++++++++++++++++++++++++++++++++++++---------------- fs/squashfs/cache.c | 73 ++++---- fs/squashfs/decompressor.c | 55 +++--- fs/squashfs/file.c | 140 +++++++++++---- fs/squashfs/file_cache.c | 38 ----- fs/squashfs/file_direct.c | 245 +++++++++++++-------------- fs/squashfs/lz4_wrapper.c | 32 +--- fs/squashfs/lzo_wrapper.c | 40 +---- fs/squashfs/page_actor.c | 175 ++++++++++++------- fs/squashfs/page_actor.h | 84 ++++----- fs/squashfs/squashfs.h | 11 +- fs/squashfs/squashfs_fs_sb.h | 2 +- fs/squashfs/super.c | 7 + fs/squashfs/xz_wrapper.c | 15 +- fs/squashfs/zlib_wrapper.c | 14 +- fs/sync.c | 1 + include/asm-generic/memory_model.h | 4 +- include/crypto/algapi.h | 3 + include/crypto/gf128mul.h | 47 +++--- include/crypto/internal/hash.h | 8 + include/linux/ipv6.h | 2 + include/linux/mmc/card.h | 3 + include/linux/mmc/mmc.h | 3 + include/linux/pfn.h | 1 + include/linux/sched.h | 8 + include/linux/task_io_accounting.h | 2 + include/linux/task_io_accounting_ops.h | 1 + include/net/addrconf.h | 3 +- include/net/if_inet6.h | 1 + include/trace/events/android_fs.h | 44 ++++- include/trace/events/android_fs_template.h | 37 ++-- include/uapi/linux/android/binder.h | 2 + include/uapi/linux/hw_breakpoint.h | 4 + include/uapi/linux/ipv6.h | 10 ++ include/uapi/linux/sysctl.h | 1 + kernel/sched/fair.c | 2 +- kernel/sched/sched.h | 2 +- net/ipv6/addrconf.c | 61 ++++++- net/ipv6/ndisc.c | 2 + net/netfilter/xt_IDLETIMER.c | 4 +- net/netfilter/xt_qtaguid.c | 24 +-- 115 files changed, 5177 insertions(+), 1926 deletions(-) create mode 100644 arch/arm64/boot/dts/arm/juno-sched-energy.dtsi create mode 100644 arch/arm64/crypto/poly-hash-ce-core.S create mode 100644 arch/arm64/crypto/poly-hash-ce-glue.c create mode 100644 crypto/heh.c delete mode 100644 drivers/misc/uid_cputime.c create mode 100644 drivers/misc/uid_sys_stats.c delete mode 100644 fs/squashfs/file_cache.c

8 years, 1 month

2
2
0 0

next-20170410 build: 2 failures 3 warnings (next-20170410)

by Build bot for Mark Brown

Tree/Branch: next-20170410 Git describe: next-20170410 Commit: f8c97bdb49 Add linux-next specific files for 20170410 Build Time: 102 min 50 sec Passed: 8 / 10 ( 80.00 %) Failed: 2 / 10 ( 20.00 %) Errors: 2 Warnings: 3 Section Mismatches: 0 Failed defconfigs: arm64-allmodconfig arm-allmodconfig Errors: arm64-allmodconfig ../mm/hmm.c:816:2: error: implicit declaration of function 'arch_remove_memory' [-Werror=implicit-function-declaration] arm-allmodconfig ERROR: "__aeabi_uldivmod" [fs/btrfs/btrfs.ko] undefined! ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 3 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v5_defconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 1 warnings 0 mismatches : x86_64-defconfig 2 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 2 1 ERROR: "__aeabi_uldivmod" [fs/btrfs/btrfs.ko] undefined! 1 ../mm/hmm.c:816:2: error: implicit declaration of function 'arch_remove_memory' [-Werror=implicit-function-declaration] Warnings Summary: 3 6 ../include/linux/kernel.h:757:16: warning: comparison of distinct pointer types lacks a cast 2 ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] 1 ../mm/hmm.c:34:0: warning: "SECTION_SIZE" redefined =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : FAIL, 1 errors, 3 warnings, 0 section mismatches Errors: ../mm/hmm.c:816:2: error: implicit declaration of function 'arch_remove_memory' [-Werror=implicit-function-declaration] Warnings: ../mm/hmm.c:34:0: warning: "SECTION_SIZE" redefined ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ../include/linux/kernel.h:757:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:757:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:757:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:757:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 1 errors, 2 warnings, 0 section mismatches Errors: ERROR: "__aeabi_uldivmod" [fs/btrfs/btrfs.ko] undefined! Warnings: ../drivers/scsi/osd/osd_uld.c:457:2: warning: ignoring return value of 'scsi_device_get', declared with attribute warn_unused_result [-Wunused-result] ../include/linux/kernel.h:757:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../include/linux/kernel.h:757:16: warning: comparison of distinct pointer types lacks a cast ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm64-allnoconfig arm-allnoconfig arm-multi_v4t_defconfig

8 years, 1 month

2
1
0 0

[GIT PULL] [lsk-v3.18-android] linaro-android v3.18 topic branch updates

by Amit Pundir

Hi Alex, Mark, Please consider following linaro-android pull request for "linux-linaro-lsk-v3.18-android" LSK branch. KernelCI link is down so build tested locally for arm(vexpress defconfig + android configs), and arm64(defconfig + android configs). Boot tested on Qemu(vexpress defconfig + android config fragments) + Android M userspace. Also fixed couple of lsk-v3.18-android errors reported on KernelCI last time. Regards, Amit Pundir The following changes since commit 1203868ffa16d93234dc005fba95b6596b87ddb5: Merge branch 'linux-linaro-lsk-v3.18' into linux-linaro-lsk-v3.18-android (2017-02-09 16:21:25 +0800) are available in the git repository at: git://android.git.linaro.org/kernel/linaro-android lsk-v3.18-android for you to fetch changes up to 95f869795a6c84786242bc4d37ef7ffb9c21c8fb: Revert "net: sysctl_net_core: Fix warning: 'one' defined but not used" (2017-03-27 18:13:08 +0530) ---------------------------------------------------------------- Adrien Schildknecht (5): Squashfs: remove the FILE_CACHE option Squashfs: refactor page_actor Squashfs: replace buffer_head with BIO Squashfs: implement .readpages() Squashfs: optimize reading uncompressed data Amit Pundir (2): ANDROID: binder: fix format specifier for type binder_size_t Revert "net: sysctl_net_core: Fix warning: 'one' defined but not used" Anson Jacob (1): usb: gadget: f_accessory: Fix for UsbAccessory clean unbind. Anurag Singh (1): input: evdev: Move wake_lock_destroy call Baruch Siach (1): crypto: arm - ignore generated SHA2 assembly files Bowgo Tsai (1): ANDROID: dm: android-verity: allow disable dm-verity for Treble VTS Chenbo Feng (1): ANDROID: fix the deadlock in xt_qtaguid when enable DDEBUG Chris Redpath (1): cpufreq: interactive governor drops bits in time calculation Daniel Rosenberg (26): ANDROID: sdcardfs: Fix incorrect hash ANDROID: sdcardfs: Add missing path_put ANDROID: sdcardfs: Don't bother deleting freelist ANDROID: sdcardfs: implement vm_ops->page_mkwrite ANDROID: sdcardfs: support direct-IO (DIO) operations ANDROID: sdcardfs: Fix case insensitive lookup ANDROID: sdcardfs: rate limit warning print ANDROID: sdcardfs: Replace get/put with d_lock ANDROID: sdcardfs: Use spin_lock_nested ANDROID: sdcardfs: Switch to internal case insensitive compare ANDROID: sdcardfs: Use d_invalidate instead of drop_recurisve ANDROID: sdcardfs: Get the blocksize from the lower fs ANDROID: sdcardfs: declare MODULE_ALIAS_FS ANDROID: sdcardfs: Use case insensitive hash function ANDROID: sdcardfs: move path_put outside of spinlock ANDROID: sdcardfs: Remove uninformative prints ANDROID: sdcardfs: Use tabs instead of spaces in multiuser.h ANDROID: sdcardfs: Fix gid issue ANDROID: sdcardfs: correct order of descriptors ANDROID: sdcardfs: Fix formatting ANDROID: sdcardfs: Fix style issues with comments ANDROID: sdcardfs: remove unneeded null check ANDROID: sdcardfs: Use pr_[...] instead of printk ANDROID: sdcardfs: Use to kstrout ANDROID: sdcardfs: Use seq_puts over seq_printf ANDROID: sdcardfs: Fix style issues in macros Greg Hackmann (1): ANDROID: sched: fix duplicate sched_group_energy const specifiers Jin Qian (10): ANDROID: uid_cputime: add per-uid IO usage accounting ANDROID: uid_sys_stats: rename uid_cputime.c to uid_sys_stats.c ANDROID: uid_sys_stats: allow writing same state ANDROID: uid_sys_stats: return full size when state is not changed. ANDROID: uid_sys_stats: remove unnecessary code in procstat switch ANDROID: uid_sys_stats: fix negative write bytes. ANDROID: sched: add a counter to track fsync ANDROID: uid_sys_stats: account for fsync syscalls uid_sys_stats: fix typo in init ANDROID: mmc: core: export emmc revision Jungseung Lee (1): BACKPORT: mmc: core: Export device lifetime information through sysfs Kees Cook (1): net: ping: check minimum size on ICMP header length Lianwei Wang (1): Revert "drivers: power: Add watchdog timer to catch drivers which lockup during suspend." Lisa Du (1): UPSTREAM: drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE Martijn Coenen (3): binder: use group leader instead of open thread android: binder: add padding to binder_fd_array_object. android: binder: move global binder state into context struct. Michael Halcrow (1): ANDROID: ext4 crypto: Disables zeroing on truncation when there's no key Min Chong (1): netfilter: Change %p to %pK in debug messages Mohan Srinivasan (2): ANDROID: Refactor fs readpage/write tracepoints. ANDROID: Replace spaces by '_' for some android filesystem tracepoints. Pavel Labath (1): BACKPORT: arm64: hw_breakpoint: Handle inexact watchpoint addresses Peter Hurley (1): BACKPORT: n_tty: Fix unordered accesses to lockless read buffer Peter Zijlstra (2): perf: Tighten (and fix) the grouping condition BACKPORT: perf: Fix event->ctx locking Pratyush Anand (3): BACKPORT: hw_breakpoint: Allow watchpoint of length 3,5,6 and 7 UPSTREAM: arm64: Allow hw watchpoint at varied offset from base address UPSTREAM: arm64: Allow hw watchpoint of length 3,5,6 and 7 Rohit kumar (1): UPSTREAM staging: ion: Fix error handling in ion_buffer_create Russell King (1): BACKPORT: ARM: re-implement physical address space switching Sami Tolvanen (1): ANDROID: android-recommended.cfg: CONFIG_CPU_SW_DOMAIN_PAN=y Seung-Woo Kim (1): UPSTREAM: regulator: core: Fix regualtor_ena_gpio_free not to access pin after freeing Subash Abhinov Kasiviswanathan (1): misc: uidstat: change release handler for stat read operation Takashi Iwai (1): ALSA: pcm : Call kill_fasync() in stream lock Wei Wang (1): uid_sys_stats: change to use rt_mutex yangdongdong (1): power: align wakeup_sources format android/configs/android-recommended.cfg | 1 + arch/arm/crypto/.gitignore | 2 + arch/arm/mm/Kconfig | 4 + arch/arm/mm/Makefile | 1 + arch/arm/mm/mmu.c | 124 +++++++++------------------ arch/arm/mm/pv-fixup-asm.S | 88 +++++++++++++++++++ arch/arm64/include/asm/hw_breakpoint.h | 6 +- arch/arm64/kernel/hw_breakpoint.c | 153 ++++++++++++++++++++++++--------- arch/arm64/kernel/ptrace.c | 7 +- drivers/base/power/main.c | 43 ---------- drivers/base/power/wakeup.c | 4 +- drivers/cpufreq/cpufreq_interactive.c | 8 +- drivers/input/evdev.c | 2 +- drivers/md/dm-android-verity.c | 53 ++++++++---- drivers/misc/Kconfig | 5 +- drivers/misc/Makefile | 2 +- drivers/misc/uid_cputime.c | 254 ------------------------------------------------------ drivers/misc/uid_stat.c | 2 +- drivers/misc/uid_sys_stats.c | 477 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/core/mmc.c | 16 ++++ drivers/regulator/core.c | 2 + drivers/staging/android/binder.c | 402 +++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------ drivers/staging/android/ion/ion.c | 15 ++-- drivers/staging/android/uapi/binder.h | 2 + drivers/tty/n_tty.c | 58 ++++++------- drivers/usb/gadget/function/f_accessory.c | 22 +++-- fs/ext4/inline.c | 12 ++- fs/ext4/inode.c | 49 +++++++++-- fs/ext4/readpage.c | 6 ++ fs/f2fs/data.c | 33 +++++-- fs/f2fs/inline.c | 13 ++- fs/mpage.c | 6 ++ fs/sdcardfs/dentry.c | 41 +++------ fs/sdcardfs/derived_perm.c | 338 +++++++++++++++++++++++++++++++++++------------------------------------- fs/sdcardfs/file.c | 17 ++-- fs/sdcardfs/inode.c | 110 ++++++++++-------------- fs/sdcardfs/lookup.c | 112 +++++++++++++++--------- fs/sdcardfs/main.c | 82 +++++++++--------- fs/sdcardfs/mmap.c | 55 ++++++++---- fs/sdcardfs/multiuser.h | 23 ++--- fs/sdcardfs/packagelist.c | 89 +++++++++++-------- fs/sdcardfs/sdcardfs.h | 139 ++++++++++++++++-------------- fs/sdcardfs/super.c | 39 +++++---- fs/squashfs/Kconfig | 28 ------ fs/squashfs/Makefile | 3 +- fs/squashfs/block.c | 545 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------- fs/squashfs/cache.c | 73 +++++++--------- fs/squashfs/decompressor.c | 55 ++++++------ fs/squashfs/file.c | 140 ++++++++++++++++++++++-------- fs/squashfs/file_cache.c | 38 --------- fs/squashfs/file_direct.c | 243 ++++++++++++++++++++++++---------------------------- fs/squashfs/lz4_wrapper.c | 32 ++----- fs/squashfs/lzo_wrapper.c | 40 ++------- fs/squashfs/page_actor.c | 175 ++++++++++++++++++++++++------------- fs/squashfs/page_actor.h | 82 +++++++----------- fs/squashfs/squashfs.h | 11 ++- fs/squashfs/squashfs_fs_sb.h | 2 +- fs/squashfs/super.c | 7 ++ fs/squashfs/xz_wrapper.c | 19 ++++- fs/squashfs/zlib_wrapper.c | 18 +++- fs/sync.c | 1 + include/linux/mmc/card.h | 3 + include/linux/mmc/mmc.h | 3 + include/linux/perf_event.h | 6 -- include/linux/sched.h | 8 ++ include/linux/task_io_accounting.h | 2 + include/linux/task_io_accounting_ops.h | 1 + include/trace/events/android_fs.h | 44 ++++++++-- include/trace/events/android_fs_template.h | 37 +++----- include/uapi/linux/hw_breakpoint.h | 4 + kernel/events/core.c | 259 ++++++++++++++++++++++++++++++++++++++++++++++--------- kernel/sched/fair.c | 2 +- kernel/sched/sched.h | 2 +- net/core/sysctl_net_core.c | 1 + net/ipv4/ping.c | 4 + net/netfilter/nf_conntrack_core.c | 16 ++-- net/netfilter/xt_qtaguid.c | 24 +++--- sound/core/pcm_lib.c | 2 +- 78 files changed, 2965 insertions(+), 1882 deletions(-) create mode 100644 arch/arm/mm/pv-fixup-asm.S delete mode 100644 drivers/misc/uid_cputime.c create mode 100644 drivers/misc/uid_sys_stats.c delete mode 100644 fs/squashfs/file_cache.c

8 years, 1 month

1
1
0 0

[GIT PULL] [lsk-v4.4-android] linaro-android v4.4 topic branch updates

by Amit Pundir

Hi Alex, Mark, Please consider following linaro-android pull request for "linux-linaro-lsk-v4.4-android" LSK branch. KernelCI link is down so build tested locally for arm(allmodconfig), x86_64(allmodconfig). arm64(allmodconfig) build resulted in known arm64-hibernate build error. Boot tested on Qemu(vexpress defconfig + android config fragments) + Android M userspace. Regards, Amit Pundir The following changes since commit 24570bf6aa530f2b41de360c87dbafa59696a6c7: Merge branch 'linux-linaro-lsk-v4.4' into linux-linaro-lsk-v4.4-android (2017-03-23 12:00:56 +0800) are available in the git repository at: git://android.git.linaro.org/kernel/linaro-android lsk-v4.4-android for you to fetch changes up to d9b4b71ac0165b029430678d0574f48c6492ba60: ANDROID: sdcardfs: Fix style issues in macros (2017-03-27 13:53:49 +0530) ---------------------------------------------------------------- Adrien Schildknecht (5): Squashfs: remove the FILE_CACHE option Squashfs: refactor page_actor Squashfs: replace buffer_head with BIO Squashfs: implement .readpages() Squashfs: optimize reading uncompressed data Alex Cope (3): UPSTREAM: crypto: gf128mul - Zero memory when freeing multiplication table ANDROID: crypto: gf128mul - Add ble multiplication functions ANDROID: crypto: heh - Add Hash-Encrypt-Hash (HEH) algorithm Anson Jacob (2): ANDROID: usb: gadget: function: Fix commenting style usb: gadget: f_accessory: Fix for UsbAccessory clean unbind. Badhri Jagan Sridharan (1): ANDROID: android-verity: do not compile as independent module Bowgo Tsai (1): ANDROID: dm: android-verity: allow disable dm-verity for Treble VTS Chenbo Feng (1): fix the deadlock in xt_qtaguid when enable DDEBUG Chris Redpath (2): cpufreq: interactive governor drops bits in time calculation DTB: Add EAS compatible Juno Energy model to 'juno.dts' Cong Wang (1): FROMLIST: 9p: fix a potential acl leak Daniel Rosenberg (27): ANDROID: sdcardfs: Fix incorrect hash ANDROID: sdcardfs: Add missing path_put ANDROID: sdcardfs: Don't bother deleting freelist ANDROID: sdcardfs: implement vm_ops->page_mkwrite ANDROID: sdcardfs: support direct-IO (DIO) operations ANDROID: sdcardfs: Fix case insensitive lookup ANDROID: sdcardfs: rate limit warning print ANDROID: sdcardfs: Replace get/put with d_lock ANDROID: sdcardfs: Use spin_lock_nested ANDROID: sdcardfs: Switch to internal case insensitive compare ANDROID: sdcardfs: Use d_invalidate instead of drop_recurisve ANDROID: sdcardfs: Get the blocksize from the lower fs ANDROID: sdcardfs: declare MODULE_ALIAS_FS ANDROID: sdcardfs: Use case insensitive hash function ANDROID: sdcardfs: move path_put outside of spinlock ANDROID: sdcardfs: Remove uninformative prints ANDROID: sdcardfs: Use tabs instead of spaces in multiuser.h ANDROID: sdcardfs: Fix gid issue ANDROID: vfs: user permission2 in notify_change2 ANDROID: sdcardfs: correct order of descriptors ANDROID: sdcardfs: Fix formatting ANDROID: sdcardfs: Fix style issues with comments ANDROID: sdcardfs: remove unneeded null check ANDROID: sdcardfs: Use pr_[...] instead of printk ANDROID: sdcardfs: Use to kstrout ANDROID: sdcardfs: Use seq_puts over seq_printf ANDROID: sdcardfs: Fix style issues in macros Eric Biggers (7): ANDROID: crypto: allow blkcipher walks over ablkcipher data ANDROID: crypto: shash - Add crypto_grab_shash() and crypto_spawn_shash_alg() ANDROID: crypto: gf128mul - Refactor gf128 overflow macros and tables ANDROID: crypto: heh - factor out poly_hash algorithm ANDROID: arm64/crypto: add ARMv8-CE optimized poly_hash algorithm ANDROID: ext4: allow encrypting filenames using HEH algorithm ANDROID: ext4: add a non-reversible key derivation method Greg Hackmann (2): ANDROID: dm: android-verity: fix table_make_digest() error handling ANDROID: sched: fix duplicate sched_group_energy const specifiers Jeremy Linton (1): UPSTREAM: arm/arm64: crypto: assure that ECB modes don't require an IV Jin Qian (7): ANDROID: uid_cputime: add per-uid IO usage accounting ANDROID: uid_sys_stats: rename uid_cputime.c to uid_sys_stats.c ANDROID: uid_sys_stats: allow writing same state ANDROID: uid_sys_stats: fix negative write bytes. ANDROID: sched: add a counter to track fsync ANDROID: uid_sys_stats: account for fsync syscalls ANDROID: mmc: core: export emmc revision Joel Scherpelz (1): net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs. Jon Medhurst (Tixy) (1): arm64: dts: juno: Add idle-states to device tree Jungseung Lee (1): BACKPORT: mmc: core: Export device lifetime information through sysfs Martijn Coenen (3): binder: use group leader instead of open thread android: binder: add padding to binder_fd_array_object. android: binder: move global binder state into context struct. Max Shi (1): config: disable CONFIG_USELIB and CONFIG_FHANDLE Mohan Srinivasan (2): ANDROID: Refactor fs readpage/write tracepoints. ANDROID: Replace spaces by '_' for some android filesystem tracepoints. Pavel Labath (1): BACKPORT: arm64: hw_breakpoint: Handle inexact watchpoint addresses Pratyush Anand (3): BACKPORT: hw_breakpoint: Allow watchpoint of length 3,5,6 and 7 UPSTREAM: arm64: Allow hw watchpoint at varied offset from base address UPSTREAM: arm64: Allow hw watchpoint of length 3,5,6 and 7 Sami Tolvanen (1): ANDROID: android-recommended.cfg: CONFIG_CPU_SW_DOMAIN_PAN=y Subash Abhinov Kasiviswanathan (2): nf: IDLETIMER: Fix use after free condition during work nf: IDLETIMER: Use fullsock when querying uid Wei Wang (1): uid_sys_stats: change to use rt_mutex yangdongdong (1): ANDROID: power: align wakeup_sources format Documentation/networking/ip-sysctl.txt | 13 +- android/configs/android-base.cfg | 4 +- android/configs/android-recommended.cfg | 1 + arch/arm/crypto/aes-ce-glue.c | 4 +- arch/arm64/boot/dts/arm/juno-r1.dts | 28 +++ arch/arm64/boot/dts/arm/juno-sched-energy.dtsi | 147 ++++++++++++++++ arch/arm64/boot/dts/arm/juno.dts | 36 ++++ arch/arm64/crypto/Kconfig | 5 + arch/arm64/crypto/Makefile | 3 + arch/arm64/crypto/aes-glue.c | 4 +- arch/arm64/crypto/poly-hash-ce-core.S | 163 ++++++++++++++++++ arch/arm64/crypto/poly-hash-ce-glue.c | 166 ++++++++++++++++++ arch/arm64/include/asm/hw_breakpoint.h | 6 +- arch/arm64/kernel/hw_breakpoint.c | 153 ++++++++++++----- arch/arm64/kernel/ptrace.c | 7 +- crypto/Kconfig | 18 ++ crypto/Makefile | 1 + crypto/blkcipher.c | 21 +++ crypto/gf128mul.c | 171 +++++++++++++++---- crypto/heh.c | 1033 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ crypto/shash.c | 8 + crypto/testmgr.c | 15 ++ crypto/testmgr.h | 194 +++++++++++++++++++++ drivers/android/binder.c | 398 ++++++++++++++++++++++++++++--------------- drivers/base/power/wakeup.c | 4 +- drivers/cpufreq/cpufreq_interactive.c | 8 +- drivers/md/Kconfig | 6 +- drivers/md/dm-android-verity.c | 55 ++++-- drivers/misc/Kconfig | 6 +- drivers/misc/Makefile | 2 +- drivers/misc/uid_cputime.c | 240 -------------------------- drivers/misc/uid_sys_stats.c | 463 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/mmc/core/mmc.c | 14 ++ drivers/usb/gadget/function/f_accessory.c | 37 ++-- fs/9p/acl.c | 2 + fs/attr.c | 2 +- fs/ext4/Kconfig | 1 + fs/ext4/crypto_fname.c | 3 +- fs/ext4/crypto_key.c | 101 ++++++++++- fs/ext4/ext4.h | 1 + fs/ext4/ext4_crypto.h | 4 + fs/ext4/inline.c | 12 +- fs/ext4/inode.c | 45 ++++- fs/ext4/readpage.c | 6 + fs/f2fs/data.c | 34 +++- fs/f2fs/inline.c | 13 +- fs/mpage.c | 6 + fs/sdcardfs/dentry.c | 41 ++--- fs/sdcardfs/derived_perm.c | 338 ++++++++++++++++++------------------ fs/sdcardfs/file.c | 17 +- fs/sdcardfs/inode.c | 110 ++++++------ fs/sdcardfs/lookup.c | 112 +++++++----- fs/sdcardfs/main.c | 82 ++++----- fs/sdcardfs/mmap.c | 55 ++++-- fs/sdcardfs/multiuser.h | 23 +-- fs/sdcardfs/packagelist.c | 86 ++++++---- fs/sdcardfs/sdcardfs.h | 135 ++++++++------- fs/sdcardfs/super.c | 39 +++-- fs/squashfs/Kconfig | 28 --- fs/squashfs/Makefile | 3 +- fs/squashfs/block.c | 546 +++++++++++++++++++++++++++++++++++++++++++---------------- fs/squashfs/cache.c | 73 ++++---- fs/squashfs/decompressor.c | 55 +++--- fs/squashfs/file.c | 140 +++++++++++---- fs/squashfs/file_cache.c | 38 ----- fs/squashfs/file_direct.c | 245 +++++++++++++-------------- fs/squashfs/lz4_wrapper.c | 32 +--- fs/squashfs/lzo_wrapper.c | 40 +---- fs/squashfs/page_actor.c | 175 ++++++++++++------- fs/squashfs/page_actor.h | 84 ++++----- fs/squashfs/squashfs.h | 11 +- fs/squashfs/squashfs_fs_sb.h | 2 +- fs/squashfs/super.c | 7 + fs/squashfs/xz_wrapper.c | 15 +- fs/squashfs/zlib_wrapper.c | 14 +- fs/sync.c | 1 + include/crypto/algapi.h | 3 + include/crypto/gf128mul.h | 47 +++--- include/crypto/internal/hash.h | 8 + include/linux/ipv6.h | 1 + include/linux/mmc/card.h | 3 + include/linux/mmc/mmc.h | 3 + include/linux/sched.h | 8 + include/linux/task_io_accounting.h | 2 + include/linux/task_io_accounting_ops.h | 1 + include/trace/events/android_fs.h | 44 ++++- include/trace/events/android_fs_template.h | 37 ++-- include/uapi/linux/android/binder.h | 2 + include/uapi/linux/hw_breakpoint.h | 4 + include/uapi/linux/ipv6.h | 10 ++ include/uapi/linux/sysctl.h | 1 + kernel/sched/fair.c | 2 +- kernel/sched/sched.h | 2 +- net/ipv6/addrconf.c | 10 ++ net/ipv6/ndisc.c | 2 + net/netfilter/xt_IDLETIMER.c | 4 +- net/netfilter/xt_qtaguid.c | 24 +-- 97 files changed, 4706 insertions(+), 1723 deletions(-) create mode 100644 arch/arm64/boot/dts/arm/juno-sched-energy.dtsi create mode 100644 arch/arm64/crypto/poly-hash-ce-core.S create mode 100644 arch/arm64/crypto/poly-hash-ce-glue.c create mode 100644 crypto/heh.c delete mode 100644 drivers/misc/uid_cputime.c create mode 100644 drivers/misc/uid_sys_stats.c delete mode 100644 fs/squashfs/file_cache.c

8 years, 1 month

1
1
0 0

[PATCH 0/4] sched: Minor cleanups

by Viresh Kumar

Hi, Here are few minor cleanups for the sched core. The first three tries to avoid reinitializing memory which is already set to zero and the last one drops an unused statement. -- viresh Viresh Kumar (4): sched: topology: drop memset() from init_rootdomain() sched: cpudeadline: don't re-initialize struct cpudl sched: cpupri: don't re-initialize struct cpupri sched: core: drop useless expression from sched_init() kernel/sched/core.c | 1 - kernel/sched/cpudeadline.c | 2 -- kernel/sched/cpupri.c | 3 --- kernel/sched/topology.c | 4 +--- 4 files changed, 1 insertion(+), 9 deletions(-) -- 2.12.0.432.g71c3a4f4ba37

8 years, 1 month

2
6
0 0

[RFC PATCH 1/3] rt-mutex: comments update

by Alex Shi

The rt-mutex documents didn't gotten meaningful update from its first version. Even after owner's pending bit was removed in commit 8161239a8 and priority list 'plist' changed to rbtree. So the documents are far late of real code, make it meaningless as its purpose. So update it to latest code and make it meaningful. Signed-off-by: Alex Shi <alex.shi(a)linaro.org> To: linux-doc(a)vger.kernel.org To: linux-kernel(a)vger.kernel.org To: Jonathan Corbet <corbet(a)lwn.net> To: Ingo Molnar <mingo(a)redhat.com> To: Peter Zijlstra <peterz(a)infradead.org> To: Steven Rostedt <rostedt(a)goodmis.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> --- Documentation/locking/rt-mutex-design.txt | 438 ++++++++++-------------------- Documentation/locking/rt-mutex.txt | 32 ++- 2 files changed, 153 insertions(+), 317 deletions(-) diff --git a/Documentation/locking/rt-mutex-design.txt b/Documentation/locking/rt-mutex-design.txt index 8666070..5a1c0ca 100644 --- a/Documentation/locking/rt-mutex-design.txt +++ b/Documentation/locking/rt-mutex-design.txt @@ -97,9 +97,9 @@ waiter - A waiter is a struct that is stored on the stack of a blocked a process being blocked on the mutex, it is fine to allocate the waiter on the process's stack (local variable). This structure holds a pointer to the task, as well as the mutex that - the task is blocked on. It also has the plist node structures to - place the task in the waiter_list of a mutex as well as the - pi_list of a mutex owner task (described below). + the task is blocked on. It also has a rbtree node structures to + place the task in the waiters of a mutex as well as the pi_waiters + of a mutex owner task (described below). waiter is sometimes used in reference to the task that is waiting on a mutex. This is the same as waiter->task. @@ -179,53 +179,34 @@ again. | F->L5-+ - -Plist ------ - -Before I go further and talk about how the PI chain is stored through lists -on both mutexes and processes, I'll explain the plist. This is similar to -the struct list_head functionality that is already in the kernel. -The implementation of plist is out of scope for this document, but it is -very important to understand what it does. - -There are a few differences between plist and list, the most important one -being that plist is a priority sorted linked list. This means that the -priorities of the plist are sorted, such that it takes O(1) to retrieve the -highest priority item in the list. Obviously this is useful to store processes -based on their priorities. - -Another difference, which is important for implementation, is that, unlike -list, the head of the list is a different element than the nodes of a list. -So the head of the list is declared as struct plist_head and nodes that will -be added to the list are declared as struct plist_node. - +If the G process has highest priority in the chain, any right lock owners +need to increase its' priority as high as G. Mutex Waiter List ----------------- Every mutex keeps track of all the waiters that are blocked on itself. The mutex -has a plist to store these waiters by priority. This list is protected by +has a rbtree to store these waiters by priority. This tree is protected by a spin lock that is located in the struct of the mutex. This lock is called -wait_lock. Since the modification of the waiter list is never done in +wait_lock. Since the modification of the waiter tree is never done in interrupt context, the wait_lock can be taken without disabling interrupts. -Task PI List +Task PI Tree ------------ -To keep track of the PI chains, each process has its own PI list. This is -a list of all top waiters of the mutexes that are owned by the process. -Note that this list only holds the top waiters and not all waiters that are +To keep track of the PI chains, each process has its own PI rbtree. This is +a tree of all top waiters of the mutexes that are owned by the process. +Note that this tree only holds the top waiters and not all waiters that are blocked on mutexes owned by the process. -The top of the task's PI list is always the highest priority task that +The top of the task's PI tree is always the highest priority task that is waiting on a mutex that is owned by the task. So if the task has inherited a priority, it will always be the priority of the task that is -at the top of this list. +at the top of this tree. -This list is stored in the task structure of a process as a plist called -pi_list. This list is protected by a spin lock also in the task structure, +This tree is stored in the task structure of a process as a rbtree called +pi_waiters. It is protected by a spin lock also in the task structure, called pi_lock. This lock may also be taken in interrupt context, so when locking the pi_lock, interrupts must be disabled. @@ -312,15 +293,12 @@ Mutex owner and flags The mutex structure contains a pointer to the owner of the mutex. If the mutex is not owned, this owner is set to NULL. Since all architectures -have the task structure on at least a four byte alignment (and if this is -not true, the rtmutex.c code will be broken!), this allows for the two -least significant bits to be used as flags. This part is also described -in Documentation/rt-mutex.txt, but will also be briefly described here. - -Bit 0 is used as the "Pending Owner" flag. This is described later. -Bit 1 is used as the "Has Waiters" flags. This is also described later - in more detail, but is set whenever there are waiters on a mutex. +have the task structure on at least a two byte alignment (and if this is +not true, the rtmutex.c code will be broken!), this allows for the least +significant bits to be used as flag. Bit 0 is used as the "Has Waiters" +flag. It's set whenever there are waiters on a mutex. +Documentation/rt-mutex.txt described this for details. cmpxchg Tricks -------------- @@ -359,7 +337,7 @@ Priority adjustments -------------------- The implementation of the PI code in rtmutex.c has several places that a -process must adjust its priority. With the help of the pi_list of a +process must adjust its priority. With the help of the pi_waiters of a process this is rather easy to know what needs to be adjusted. The functions implementing the task adjustments are rt_mutex_adjust_prio, @@ -371,10 +349,10 @@ rt_mutex_getprio and rt_mutex_setprio are only used in __rt_mutex_adjust_prio. rt_mutex_getprio returns the priority that the task should have. Either the task's own normal priority, or if a process of a higher priority is waiting on a mutex owned by the task, then that higher priority should be returned. -Since the pi_list of a task holds an order by priority list of all the top -waiters of all the mutexes that the task owns, rt_mutex_getprio simply needs -to compare the top pi waiter to its own normal priority, and return the higher -priority back. +Since the pi_waiters of a task holds an order by priority of all the top waiters +of all the mutexes that the task owns, rt_mutex_getprio simply needs to compare +the top pi waiter to its own normal priority, and return the higher priority +back. (Note: if looking at the code, you will notice that the lower number of prio is returned. This is because the prio field in the task structure @@ -392,7 +370,7 @@ or decrease the priority of the task. In the case that a higher priority process has just blocked on a mutex owned by the task, __rt_mutex_adjust_prio would increase/boost the task's priority. But if a higher priority task were for some reason to leave the mutex (timeout or signal), this same function -would decrease/unboost the priority of the task. That is because the pi_list +would decrease/unboost the priority of the task. That is because the pi_waiters always contains the highest priority task that is waiting on a mutex owned by the task, so we only need to compare the priority of that top pi waiter to the normal priority of the given task. @@ -414,7 +392,8 @@ rt_mutex_adjust_prio_chain is called with a task to be checked for PI (de)boosting (the owner of a mutex that a process is blocking on), a flag to check for deadlocking, the mutex that the task owns, and a pointer to a waiter that is the process's waiter struct that is blocked on the mutex (although this -parameter may be NULL for deboosting). +parameter may be NULL for deboosting), a 'next_lock' mutex on which the task +is blocked, and a top_task as the top waiter of the mutex. For this explanation, I will not mention deadlock detection. This explanation will try to stay at a high level. @@ -424,133 +403,70 @@ that the state of the owner and lock can change when entered into this function. Before this function is called, the task has already had rt_mutex_adjust_prio performed on it. This means that the task is set to the priority that it -should be at, but the plist nodes of the task's waiter have not been updated -with the new priorities, and that this task may not be in the proper locations -in the pi_lists and wait_lists that the task is blocked on. This function +should be at, but the rbtree nodes of the task's waiter have not been updated +with the new priorities, and this task may not be in the proper locations +in the pi_waiters and waiters that the task is blocked on. This function solves all that. -A loop is entered, where task is the owner to be checked for PI changes that -was passed by parameter (for the first iteration). The pi_lock of this task is -taken to prevent any more changes to the pi_list of the task. This also -prevents new tasks from completing the blocking on a mutex that is owned by this -task. - -If the task is not blocked on a mutex then the loop is exited. We are at -the top of the PI chain. - -A check is now done to see if the original waiter (the process that is blocked -on the current mutex) is the top pi waiter of the task. That is, is this -waiter on the top of the task's pi_list. If it is not, it either means that -there is another process higher in priority that is blocked on one of the -mutexes that the task owns, or that the waiter has just woken up via a signal -or timeout and has left the PI chain. In either case, the loop is exited, since -we don't need to do any more changes to the priority of the current task, or any -task that owns a mutex that this current task is waiting on. A priority chain -walk is only needed when a new top pi waiter is made to a task. - -The next check sees if the task's waiter plist node has the priority equal to -the priority the task is set at. If they are equal, then we are done with -the loop. Remember that the function started with the priority of the -task adjusted, but the plist nodes that hold the task in other processes -pi_lists have not been adjusted. - -Next, we look at the mutex that the task is blocked on. The mutex's wait_lock -is taken. This is done by a spin_trylock, because the locking order of the -pi_lock and wait_lock goes in the opposite direction. If we fail to grab the -lock, the pi_lock is released, and we restart the loop. - -Now that we have both the pi_lock of the task as well as the wait_lock of -the mutex the task is blocked on, we update the task's waiter's plist node -that is located on the mutex's wait_list. - -Now we release the pi_lock of the task. - -Next the owner of the mutex has its pi_lock taken, so we can update the -task's entry in the owner's pi_list. If the task is the highest priority -process on the mutex's wait_list, then we remove the previous top waiter -from the owner's pi_list, and replace it with the task. - -Note: It is possible that the task was the current top waiter on the mutex, - in which case the task is not yet on the pi_list of the waiter. This - is OK, since plist_del does nothing if the plist node is not on any - list. - -If the task was not the top waiter of the mutex, but it was before we -did the priority updates, that means we are deboosting/lowering the -task. In this case, the task is removed from the pi_list of the owner, -and the new top waiter is added. - -Lastly, we unlock both the pi_lock of the task, as well as the mutex's -wait_lock, and continue the loop again. On the next iteration of the -loop, the previous owner of the mutex will be the task that will be -processed. - -Note: One might think that the owner of this mutex might have changed - since we just grab the mutex's wait_lock. And one could be right. - The important thing to remember is that the owner could not have - become the task that is being processed in the PI chain, since - we have taken that task's pi_lock at the beginning of the loop. - So as long as there is an owner of this mutex that is not the same - process as the tasked being worked on, we are OK. - - Looking closely at the code, one might be confused. The check for the - end of the PI chain is when the task isn't blocked on anything or the - task's waiter structure "task" element is NULL. This check is - protected only by the task's pi_lock. But the code to unlock the mutex - sets the task's waiter structure "task" element to NULL with only - the protection of the mutex's wait_lock, which was not taken yet. - Isn't this a race condition if the task becomes the new owner? - - The answer is No! The trick is the spin_trylock of the mutex's - wait_lock. If we fail that lock, we release the pi_lock of the - task and continue the loop, doing the end of PI chain check again. - - In the code to release the lock, the wait_lock of the mutex is held - the entire time, and it is not let go when we grab the pi_lock of the - new owner of the mutex. So if the switch of a new owner were to happen - after the check for end of the PI chain and the grabbing of the - wait_lock, the unlocking code would spin on the new owner's pi_lock - but never give up the wait_lock. So the PI chain loop is guaranteed to - fail the spin_trylock on the wait_lock, release the pi_lock, and - try again. - - If you don't quite understand the above, that's OK. You don't have to, - unless you really want to make a proof out of it ;) - - -Pending Owners and Lock stealing --------------------------------- - -One of the flags in the owner field of the mutex structure is "Pending Owner". -What this means is that an owner was chosen by the process releasing the -mutex, but that owner has yet to wake up and actually take the mutex. - -Why is this important? Why can't we just give the mutex to another process -and be done with it? - -The PI code is to help with real-time processes, and to let the highest -priority process run as long as possible with little latencies and delays. -If a high priority process owns a mutex that a lower priority process is -blocked on, when the mutex is released it would be given to the lower priority -process. What if the higher priority process wants to take that mutex again. -The high priority process would fail to take that mutex that it just gave up -and it would need to boost the lower priority process to run with full -latency of that critical section (since the low priority process just entered -it). - -There's no reason a high priority process that gives up a mutex should be -penalized if it tries to take that mutex again. If the new owner of the -mutex has not woken up yet, there's no reason that the higher priority process -could not take that mutex away. - -To solve this, we introduced Pending Ownership and Lock Stealing. When a -new process is given a mutex that it was blocked on, it is only given -pending ownership. This means that it's the new owner, unless a higher -priority process comes in and tries to grab that mutex. If a higher priority -process does come along and wants that mutex, we let the higher priority -process "steal" the mutex from the pending owner (only if it is still pending) -and continue with the mutex. - +The main operation of this function is summarized by Thomas Gleixner as +following: + + Step Description Protected by + function arguments: + @task [R] + @orig_lock if != NULL @top_task is blocked on it + @next_lock Unprotected. Cannot be + dereferenced. Only used for + comparison. + @orig_waiter if != NULL @top_task is blocked on it + @top_task current, or in case of proxy + locking protected by calling + code + again: + loop_sanity_check(); + retry: + [1] lock(task->pi_lock); [R] acquire [P] + [2] waiter = task->pi_blocked_on; [P] + [3] check_exit_conditions_1(); [P] + [4] lock = waiter->lock; [P] + [5] if (!try_lock(lock->wait_lock)) { [P] try to acquire [L] + unlock(task->pi_lock); release [P] + goto retry; + } + [6] check_exit_conditions_2(); [P] + [L] + [7] requeue_lock_waiter(lock, waiter); [P] + [L] + [8] unlock(task->pi_lock); release [P] + put_task_struct(task); release [R] + [9] check_exit_conditions_3(); [L] + [10] task = owner(lock); [L] + get_task_struct(task); [L] acquire [R] + lock(task->pi_lock); [L] acquire [P] + [11] requeue_pi_waiter(tsk, waiters(lock));[P] + [L] + [12] check_exit_conditions_4(); [P] + [L] + [13] unlock(task->pi_lock); release [P] + unlock(lock->wait_lock); release [L] + goto again; + +The first 5 steps are used to hold the task and the lock on which is the task +blocked. It will try to get both of them in loop, or return when some exit +conditions happened, some of them like: + 1) Get the end of the boosting chain + 2) Task or lock moved on or changed during retry + 3) The original waiter isn't the highest in the lock owner's pi_waiters + 4) The waiter's prio is same as the lock owner's prio + +After hold the task and the lock which task blocked on. We update the task +blocked_on waiter's prio to lock owner's prio and requeue it in the lock's +waiters tree. That is done from steps 6 to 8. + +Since the waiter's priority just was changed, it may causes pi_waiters change of +the lock owner task, if the changed prio was or will be highest prio in the +pi_waiters of the lock owner, the lock owner task's prio will be deboost or +boost accordingly. That's what happens from steps 10 to 11. + +Now, the 'task' pointer is forward one step in PI chain, so we goto 'again' to +repeat the PI chain walking, unless some exit conditions triggered, or the +right end task of PI chain is updated to right priority. Taking of a mutex (The walk through) ------------------------------------ @@ -563,13 +479,13 @@ done when we have CMPXCHG enabled (otherwise the fast taking automatically fails). Only when the owner field of the mutex is NULL can the lock be taken with the CMPXCHG and nothing else needs to be done. -If there is contention on the lock, whether it is owned or pending owner -we go about the slow path (rt_mutex_slowlock). +If there is contention on the lock, we go about the slow path +(rt_mutex_slowlock). The slow path function is where the task's waiter structure is created on the stack. This is because the waiter structure is only needed for the scope of this function. The waiter structure holds the nodes to store -the task on the wait_list of the mutex, and if need be, the pi_list of +the task on the waiters of the mutex, and if need be, the pi_waiters of the owner. The wait_lock of the mutex is taken since the slow path of unlocking the @@ -581,135 +497,64 @@ contention). try_to_take_rt_mutex is used every time the task tries to grab a mutex in the slow path. The first thing that is done here is an atomic setting of -the "Has Waiters" flag of the mutex's owner field. Yes, this could really -be false, because if the mutex has no owner, there are no waiters and -the current task also won't have any waiters. But we don't have the lock -yet, so we assume we are going to be a waiter. The reason for this is to -play nice for those architectures that do have CMPXCHG. By setting this flag -now, the owner of the mutex can't release the mutex without going into the -slow unlock path, and it would then need to grab the wait_lock, which this -code currently holds. So setting the "Has Waiters" flag forces the owner -to synchronize with this code. - -Now that we know that we can't have any races with the owner releasing the -mutex, we check to see if we can take the ownership. This is done if the -mutex doesn't have a owner, or if we can steal the mutex from a pending -owner. Let's look at the situations we have here. - - 1) Has owner that is pending - ---------------------------- - - The mutex has a owner, but it hasn't woken up and the mutex flag - "Pending Owner" is set. The first check is to see if the owner isn't the - current task. This is because this function is also used for the pending - owner to grab the mutex. When a pending owner wakes up, it checks to see - if it can take the mutex, and this is done if the owner is already set to - itself. If so, we succeed and leave the function, clearing the "Pending - Owner" bit. - - If the pending owner is not current, we check to see if the current priority is - higher than the pending owner. If not, we fail the function and return. - - There's also something special about a pending owner. That is a pending owner - is never blocked on a mutex. So there is no PI chain to worry about. It also - means that if the mutex doesn't have any waiters, there's no accounting needed - to update the pending owner's pi_list, since we only worry about processes - blocked on the current mutex. - - If there are waiters on this mutex, and we just stole the ownership, we need - to take the top waiter, remove it from the pi_list of the pending owner, and - add it to the current pi_list. Note that at this moment, the pending owner - is no longer on the list of waiters. This is fine, since the pending owner - would add itself back when it realizes that it had the ownership stolen - from itself. When the pending owner tries to grab the mutex, it will fail - in try_to_take_rt_mutex if the owner field points to another process. - - 2) No owner - ----------- - - If there is no owner (or we successfully stole the lock), we set the owner - of the mutex to current, and set the flag of "Has Waiters" if the current - mutex actually has waiters, or we clear the flag if it doesn't. See, it was - OK that we set that flag early, since now it is cleared. - - 3) Failed to grab ownership - --------------------------- - - The most interesting case is when we fail to take ownership. This means that - there exists an owner, or there's a pending owner with equal or higher - priority than the current task. - -We'll continue on the failed case. - -If the mutex has a timeout, we set up a timer to go off to break us out -of this mutex if we failed to get it after a specified amount of time. - -Now we enter a loop that will continue to try to take ownership of the mutex, or -fail from a timeout or signal. - -Once again we try to take the mutex. This will usually fail the first time -in the loop, since it had just failed to get the mutex. But the second time -in the loop, this would likely succeed, since the task would likely be -the pending owner. - -If the mutex is TASK_INTERRUPTIBLE a check for signals and timeout is done -here. - -The waiter structure has a "task" field that points to the task that is blocked -on the mutex. This field can be NULL the first time it goes through the loop -or if the task is a pending owner and had its mutex stolen. If the "task" -field is NULL then we need to set up the accounting for it. +the "Has Waiters" flag of the mutex's owner field. By setting this flag +now, the owner of possible contestant of the mutex can't release the mutex +without going into the slow unlock path, and it would then need to grab the +wait_lock, which this code currently holds. So setting the "Has Waiters" flag +forces the possible owner to synchronize with this code. + +If the lock has a owner already. It's one of case we should give up. Other +reasons to give up this lock include: + 1) This enqueued waiter isn't the top waiter, aka highest priority waiter. + 2) There are other waiters on the lock, and this task prio is lower or equal + to their priority. + +If none of fails is triggered, we will take the lock for this task -- set the +task as lock's owner. Also hook the highest waiters on this task's pi_waiters +tree. + +If we give up the mutex getting in try_to_take_rt_mutex, task_blocks_on_rt_mutex +function will be called to setup waiter and progagate pi chain for the lock and +task. That is introduced in following: Task blocks on mutex -------------------- The accounting of a mutex and process is done with the waiter structure of the process. The "task" field is set to the process, and the "lock" field -to the mutex. The plist nodes are initialized to the processes current -priority. +to the mutex. The rbtree node of waiter are initialized to the processes +current priority. Since the wait_lock was taken at the entry of the slow lock, we can safely -add the waiter to the wait_list. If the current process is the highest -priority process currently waiting on this mutex, then we remove the -previous top waiter process (if it exists) from the pi_list of the owner, -and add the current process to that list. Since the pi_list of the owner +add the waiter to the task waiter tree. If the current process is the +highest priority process currently waiting on this mutex, then we remove the +previous top waiter process (if it exists) from the pi_waiters of the owner, +and add the current process to that tree. Since the pi_waiter of the owner has changed, we call rt_mutex_adjust_prio on the owner to see if the owner should adjust its priority accordingly. -If the owner is also blocked on a lock, and had its pi_list changed +If the owner is also blocked on a lock, and had its pi_waiters changed (or deadlock checking is on), we unlock the wait_lock of the mutex and go ahead and run rt_mutex_adjust_prio_chain on the owner, as described earlier. Now all locks are released, and if the current process is still blocked on a -mutex (waiter "task" field is not NULL), then we go to sleep (call schedule). +mutex (waiter "task" field is not NULL), then we go to sleep (call schedule in +function __rt_mutex_slowlock). + Waking up in the loop --------------------- -The schedule can then wake up for a few reasons. - 1) we were given pending ownership of the mutex. - 2) we received a signal and was TASK_INTERRUPTIBLE - 3) we had a timeout and was TASK_INTERRUPTIBLE - -In any of these cases, we continue the loop and once again try to grab the -ownership of the mutex. If we succeed, we exit the loop, otherwise we continue -and on signal and timeout, will exit the loop, or if we had the mutex stolen -we just simply add ourselves back on the lists and go back to sleep. +The schedule can then wake up for a few reasons, included: + 1) we received a signal and was TASK_INTERRUPTIBLE + 2) we had a timeout and was TASK_INTERRUPTIBLE -Note: For various reasons, because of timeout and signals, the steal mutex - algorithm needs to be careful. This is because the current process is - still on the wait_list. And because of dynamic changing of priorities, - especially on SCHED_OTHER tasks, the current process can be the - highest priority task on the wait_list. - -Failed to get mutex on Timeout or Signal ----------------------------------------- +In these above cases, we are failed to get this lock, so we break out the loop +remove self from the lock waiter, if still we are. -If a timeout or signal occurred, the waiter's "task" field would not be -NULL and the task needs to be taken off the wait_list of the mutex and perhaps -pi_list of the owner. If this process was a high priority process, then -the rt_mutex_adjust_prio_chain needs to be executed again on the owner, -but this time it will be lowering the priorities. +For other reasons we are woken up, we will keep trying to take rt mutex in +every waking up. If it isn't possible will yeild the cpu again and wait for +next schedule chance. Unlocking the Mutex @@ -739,25 +584,12 @@ owner still needs to make this check. If there are no waiters then the mutex owner field is set to NULL, the wait_lock is released and nothing more is needed. -If there are waiters, then we need to wake one up and give that waiter -pending ownership. +If there are waiters, then we need to wake one up. On the wake up code, the pi_lock of the current owner is taken. The top -waiter of the lock is found and removed from the wait_list of the mutex -as well as the pi_list of the current owner. The task field of the new -pending owner's waiter structure is set to NULL, and the owner field of the -mutex is set to the new owner with the "Pending Owner" bit set, as well -as the "Has Waiters" bit if there still are other processes blocked on the -mutex. - -The pi_lock of the previous owner is released, and the new pending owner's -pi_lock is taken. Remember that this is the trick to prevent the race -condition in rt_mutex_adjust_prio_chain from adding itself as a waiter -on the mutex. - -We now clear the "pi_blocked_on" field of the new pending owner, and if -the mutex still has waiters pending, we add the new top waiter to the pi_list -of the pending owner. +waiter of the lock is found and removed from the waiters tree of the mutex +as well as the pi_waiters tree of the current owner. The "Has Waiters" bit is +marked to prevent new lower priority task to steal this lock. Finally we unlock the pi_lock of the pending owner and wake it up. @@ -772,6 +604,7 @@ Credits ------- Author: Steven Rostedt <rostedt(a)goodmis.org> +Updater: Alex Shi <alex.shi(a)linaro.org> Reviewers: Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and Randy Dunlap @@ -779,3 +612,4 @@ Updates ------- This document was originally written for 2.6.17-rc3-mm1 +was updated on 4.11-rc4. diff --git a/Documentation/locking/rt-mutex.txt b/Documentation/locking/rt-mutex.txt index 243393d..1481f97 100644 --- a/Documentation/locking/rt-mutex.txt +++ b/Documentation/locking/rt-mutex.txt @@ -28,14 +28,13 @@ magic bullet for poorly designed applications, but it allows well-designed applications to use userspace locks in critical parts of an high priority thread, without losing determinism. -The enqueueing of the waiters into the rtmutex waiter list is done in +The enqueueing of the waiters into the rtmutex waiter tree is done in priority order. For same priorities FIFO order is chosen. For each rtmutex, only the top priority waiter is enqueued into the owner's -priority waiters list. This list too queues in priority order. Whenever +priority waiters tree. This tree too queues in priority order. Whenever the top priority waiter of a task changes (for example it timed out or -got a signal), the priority of the owner task is readjusted. [The -priority enqueueing is handled by "plists", see include/linux/plist.h -for more details.] +got a signal), the priority of the owner task is readjusted. The +priority enqueueing is handled by "pi_waiters". RT-mutexes are optimized for fastpath operations and have no internal locking overhead when locking an uncontended mutex or unlocking a mutex @@ -50,22 +49,25 @@ rt_mutex->owner holds the task_struct pointer of the owner. Bit 0 and 1 are used to keep track of the "owner is pending" and "rtmutex has waiters" state. - owner bit1 bit0 - NULL 0 0 mutex is free (fast acquire possible) - NULL 0 1 invalid state - NULL 1 0 Transitional state* - NULL 1 1 invalid state - taskpointer 0 0 mutex is held (fast release possible) - taskpointer 0 1 task is pending owner - taskpointer 1 0 mutex is held and has waiters - taskpointer 1 1 task is pending owner and mutex has waiters +lock->owner holds the task_struct pointer of the owner. Bit 0 is used to +keep track of the "lock has waiters" state. + + owner bit0 + NULL 0 lock is free (fast acquire possible) + NULL 1 lock is free and has waiters and the top waiter + is going to take the lock* + taskpointer 0 lock is held (fast release possible) + taskpointer 1 lock is held and has waiters** + + The fast atomic compare exchange based acquire and release is only + possible when bit 0 of lock->owner is 0. Pending-ownership handling is a performance optimization: pending-ownership is assigned to the first (highest priority) waiter of the mutex, when the mutex is released. The thread is woken up and once it starts executing it can acquire the mutex. Until the mutex is taken by it (bit 0 is cleared) a competing higher priority thread can "steal" -the mutex which puts the woken up thread back on the waiters list. +the mutex which puts the woken up thread back on the waiters tree. The pending-ownership optimization is especially important for the uninterrupted workflow of high-prio tasks which repeatedly -- 2.8.1.101.g72d917a

8 years, 2 months

1
5
0 0

[PATCH] PM / OPP: Use - instead of @ for DT entries

by Viresh Kumar

Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- .../devicetree/bindings/devfreq/exynos-bus.txt | 46 +++++++-------- Documentation/devicetree/bindings/opp/opp.txt | 38 ++++++------- arch/arm/boot/dts/exynos3250.dtsi | 46 +++++++-------- arch/arm/boot/dts/exynos4210.dtsi | 32 +++++------ arch/arm/boot/dts/exynos4412-prime.dtsi | 4 +- arch/arm/boot/dts/exynos4412.dtsi | 66 +++++++++++----------- arch/arm/boot/dts/exynos5420.dtsi | 40 ++++++------- arch/arm/boot/dts/exynos5800.dtsi | 56 +++++++++--------- arch/arm/boot/dts/pxa25x.dtsi | 8 +-- arch/arm/boot/dts/pxa27x.dtsi | 14 ++--- arch/arm/boot/dts/sun8i-a33.dtsi | 8 +-- arch/arm/boot/dts/uniphier-pro5.dtsi | 32 +++++------ arch/arm/boot/dts/uniphier-pxs2.dtsi | 16 +++--- arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 48 ++++++++-------- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 50 ++++++++-------- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 14 ++--- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 32 +++++------ arch/arm64/boot/dts/zte/zx296718.dtsi | 10 ++-- 18 files changed, 280 insertions(+), 280 deletions(-) diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt index d085ef90d27c..f8e946471a58 100644 --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt @@ -202,23 +202,23 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; @@ -292,23 +292,23 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <900000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; opp-microvolt = <900000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <1000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -318,19 +318,19 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; }; @@ -339,19 +339,19 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; }; }; @@ -360,13 +360,13 @@ is able to support the bus frequency for all Exynos SoCs. compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 63725498bd20..e36d261b9ba6 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -186,20 +186,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; clock-latency-ns = <290000>; @@ -265,20 +265,20 @@ independently. * independently. */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000; @@ -341,20 +341,20 @@ DVFS state together. compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1025000>; opp-microamp = <90000>; @@ -367,20 +367,20 @@ DVFS state together. compatible = "operating-points-v2"; opp-shared; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1050000 1045000 1055000>; opp-microamp = <95000>; clock-latency-ns = <400000>; opp-suspend; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1075000>; opp-microamp = <100000>; clock-latency-ns = <400000>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1100000 1010000 1110000>; opp-microamp = <95000>; @@ -409,7 +409,7 @@ Example 4: Handling multiple regulators compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <970000>, /* Supply 0 */ <960000>, /* Supply 1 */ @@ -422,7 +422,7 @@ Example 4: Handling multiple regulators /* OR */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>, /* Supply 0 */ <965000 960000 975000>, /* Supply 1 */ @@ -435,7 +435,7 @@ Example 4: Handling multiple regulators /* OR */ - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000 970000 985000>, /* Supply 0 */ <965000 960000 975000>, /* Supply 1 */ @@ -467,7 +467,7 @@ Example 5: opp-supported-hw status = "okay"; opp-shared; - opp@600000000 { + opp-600000000 { /* * Supports all substrate and process versions for 0xF * cuts, i.e. only first four cuts. @@ -478,7 +478,7 @@ Example 5: opp-supported-hw ... }; - opp@800000000 { + opp-800000000 { /* * Supports: * - cuts: only one, 6th cut (represented by 6th bit). @@ -510,7 +510,7 @@ Example 5: opp-supported-hw compatible = "operating-points-v2"; opp-shared; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt-slow = <915000 900000 925000>; opp-microvolt-fast = <975000 970000 985000>; @@ -518,7 +518,7 @@ Example 5: opp-supported-hw opp-microamp-fast = <71000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ <925000 910000 935000>; /* Supply vcc1 */ diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 9c28ef4508e0..590ee442d0ae 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -745,23 +745,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <800000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <800000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <800000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <825000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <875000>; }; @@ -835,23 +835,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; opp-microvolt = <900000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; opp-microvolt = <900000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <1000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -861,19 +861,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; }; @@ -882,19 +882,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; }; }; @@ -903,13 +903,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@80000000 { + opp-80000000 { opp-hz = /bits/ 64 <80000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index f9408188f97f..3678d5b44d80 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -335,15 +335,15 @@ compatible = "operating-points-v2"; opp-shared; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <1025000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <1050000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1150000>; }; @@ -353,13 +353,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; @@ -368,10 +368,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@5000000 { + opp-5000000 { opp-hz = /bits/ 64 <5000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -380,10 +380,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@10000000 { + opp-10000000 { opp-hz = /bits/ 64 <10000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; }; @@ -392,13 +392,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; }; @@ -407,13 +407,13 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi index e75bc170c89c..a67bd953d754 100644 --- a/arch/arm/boot/dts/exynos4412-prime.dtsi +++ b/arch/arm/boot/dts/exynos4412-prime.dtsi @@ -20,12 +20,12 @@ }; &cpu0_opp_table { - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; }; - opp@1704000000 { + opp-1704000000 { opp-hz = /bits/ 64 <1704000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 235bbb69ad7c..ce240d0198b3 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -76,73 +76,73 @@ compatible = "operating-points-v2"; opp-shared; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <200000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <925000>; clock-latency-ns = <200000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <950000>; clock-latency-ns = <200000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <975000>; clock-latency-ns = <200000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <987500>; clock-latency-ns = <200000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; clock-latency-ns = <200000>; opp-suspend; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1037500>; clock-latency-ns = <200000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1087500>; clock-latency-ns = <200000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1137500>; clock-latency-ns = <200000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1187500>; clock-latency-ns = <200000>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1250000>; clock-latency-ns = <200000>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1287500>; clock-latency-ns = <200000>; }; - cpu0_opp_1500: opp@1500000000 { + cpu0_opp_1500: opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1350000>; clock-latency-ns = <200000>; @@ -433,23 +433,23 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <900000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <900000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <900000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <950000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1050000>; }; @@ -459,16 +459,16 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; }; @@ -525,19 +525,19 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <900000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <925000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <950000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <1000000>; }; @@ -547,10 +547,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; }; @@ -559,10 +559,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; }; @@ -571,10 +571,10 @@ compatible = "operating-points-v2"; opp-shared; - opp@50000000 { + opp-50000000 { opp-hz = /bits/ 64 <50000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 7dc9dc82afd8..5cd6c7389d51 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -49,62 +49,62 @@ cluster_a15_opp_table: opp_table0 { compatible = "operating-points-v2"; opp-shared; - opp@1800000000 { + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1250000>; clock-latency-ns = <140000>; }; - opp@1700000000 { + opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <1212500>; clock-latency-ns = <140000>; }; - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1175000>; clock-latency-ns = <140000>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1137500>; clock-latency-ns = <140000>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1112500>; clock-latency-ns = <140000>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1062500>; clock-latency-ns = <140000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1037500>; clock-latency-ns = <140000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1012500>; clock-latency-ns = <140000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = < 987500>; clock-latency-ns = <140000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = < 962500>; clock-latency-ns = <140000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = < 937500>; clock-latency-ns = <140000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = < 912500>; clock-latency-ns = <140000>; @@ -114,42 +114,42 @@ cluster_a7_opp_table: opp_table1 { compatible = "operating-points-v2"; opp-shared; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1275000>; clock-latency-ns = <140000>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1212500>; clock-latency-ns = <140000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1162500>; clock-latency-ns = <140000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1112500>; clock-latency-ns = <140000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1062500>; clock-latency-ns = <140000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1025000>; clock-latency-ns = <140000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <975000>; clock-latency-ns = <140000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <937500>; clock-latency-ns = <140000>; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index 8213016803e5..9ddb6bacac5a 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -24,60 +24,60 @@ }; &cluster_a15_opp_table { - opp@1700000000 { + opp-1700000000 { opp-microvolt = <1250000>; }; - opp@1600000000 { + opp-1600000000 { opp-microvolt = <1250000>; }; - opp@1500000000 { + opp-1500000000 { opp-microvolt = <1100000>; }; - opp@1400000000 { + opp-1400000000 { opp-microvolt = <1100000>; }; - opp@1300000000 { + opp-1300000000 { opp-microvolt = <1100000>; }; - opp@1200000000 { + opp-1200000000 { opp-microvolt = <1000000>; }; - opp@1100000000 { + opp-1100000000 { opp-microvolt = <1000000>; }; - opp@1000000000 { + opp-1000000000 { opp-microvolt = <1000000>; }; - opp@900000000 { + opp-900000000 { opp-microvolt = <1000000>; }; - opp@800000000 { + opp-800000000 { opp-microvolt = <900000>; }; - opp@700000000 { + opp-700000000 { opp-microvolt = <900000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; @@ -85,46 +85,46 @@ }; &cluster_a7_opp_table { - opp@1300000000 { + opp-1300000000 { opp-microvolt = <1250000>; }; - opp@1200000000 { + opp-1200000000 { opp-microvolt = <1250000>; }; - opp@1100000000 { + opp-1100000000 { opp-microvolt = <1250000>; }; - opp@1000000000 { + opp-1000000000 { opp-microvolt = <1100000>; }; - opp@900000000 { + opp-900000000 { opp-microvolt = <1100000>; }; - opp@800000000 { + opp-800000000 { opp-microvolt = <1100000>; }; - opp@700000000 { + opp-700000000 { opp-microvolt = <1000000>; }; - opp@600000000 { + opp-600000000 { opp-microvolt = <1000000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1000000>; clock-latency-ns = <140000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1000000>; clock-latency-ns = <140000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <900000>; clock-latency-ns = <140000>; diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi index f9f4726396a0..95d59be97213 100644 --- a/arch/arm/boot/dts/pxa25x.dtsi +++ b/arch/arm/boot/dts/pxa25x.dtsi @@ -93,22 +93,22 @@ pxa250_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@99532800 { + opp-99532800 { opp-hz = /bits/ 64 <99532800>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@199065600 { + opp-199065600 { opp-hz = /bits/ 64 <199065600>; opp-microvolt = <1000000 950000 1650000>; clock-latency-ns = <20>; }; - opp@298598400 { + opp-298598400 { opp-hz = /bits/ 64 <298598400>; opp-microvolt = <1100000 1045000 1650000>; clock-latency-ns = <20>; }; - opp@398131200 { + opp-398131200 { opp-hz = /bits/ 64 <398131200>; opp-microvolt = <1300000 1235000 1650000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index e0fab48ba6fa..5f1d6da02a4c 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -141,37 +141,37 @@ pxa270_opp_table: opp_table0 { compatible = "operating-points-v2"; - opp@104000000 { + opp-104000000 { opp-hz = /bits/ 64 <104000000>; opp-microvolt = <900000 900000 1705000>; clock-latency-ns = <20>; }; - opp@156000000 { + opp-156000000 { opp-hz = /bits/ 64 <156000000>; opp-microvolt = <1000000 1000000 1705000>; clock-latency-ns = <20>; }; - opp@208000000 { + opp-208000000 { opp-hz = /bits/ 64 <208000000>; opp-microvolt = <1180000 1180000 1705000>; clock-latency-ns = <20>; }; - opp@312000000 { + opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <1250000 1250000 1705000>; clock-latency-ns = <20>; }; - opp@416000000 { + opp-416000000 { opp-hz = /bits/ 64 <416000000>; opp-microvolt = <1350000 1350000 1705000>; clock-latency-ns = <20>; }; - opp@520000000 { + opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-microvolt = <1450000 1450000 1705000>; clock-latency-ns = <20>; }; - opp@624000000 { + opp-624000000 { opp-hz = /bits/ 64 <624000000>; opp-microvolt = <1550000 1550000 1705000>; clock-latency-ns = <20>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 0467fb365bfc..7c7f8d8abfa0 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -49,25 +49,25 @@ compatible = "operating-points-v2"; opp-shared; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; opp-microvolt = <1040000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@816000000 { + opp-816000000 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <1100000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1008000000 { + opp-1008000000 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <1200000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index dbc5e5333163..22ef2842be3a 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -77,67 +77,67 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@116667000 { + opp-116667000 { opp-hz = /bits/ 64 <116667000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@175000000 { + opp-175000000 { opp-hz = /bits/ 64 <175000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@233334000 { + opp-233334000 { opp-hz = /bits/ 64 <233334000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@466667000 { + opp-466667000 { opp-hz = /bits/ 64 <466667000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@933334000 { + opp-933334000 { opp-hz = /bits/ 64 <933334000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index e9e031d63c1a..acaaa2187843 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -97,35 +97,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; clock-latency-ns = <300>; }; - opp@150000000 { + opp-150000000 { opp-hz = /bits/ 64 <150000000>; clock-latency-ns = <300>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; clock-latency-ns = <300>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; clock-latency-ns = <300>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; clock-latency-ns = <300>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; clock-latency-ns = <300>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <300>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index c42dc39c3223..ec11343dc528 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -94,27 +94,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1075000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <975000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <962500>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <950000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <937500>; }; @@ -123,19 +123,19 @@ bus_g2d_266_opp_table: opp_table3 { compatible = "operating-points-v2"; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -143,13 +143,13 @@ bus_gscl_opp_table: opp_table4 { compatible = "operating-points-v2"; - opp@333000000 { + opp-333000000 { opp-hz = /bits/ 64 <333000000>; }; - opp@222000000 { + opp-222000000 { opp-hz = /bits/ 64 <222000000>; }; - opp@166500000 { + opp-166500000 { opp-hz = /bits/ 64 <166500000>; }; }; @@ -158,22 +158,22 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -181,16 +181,16 @@ bus_noc2_opp_table: opp_table6 { compatible = "operating-points-v2"; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 16072c1c3ed3..727f36abf3d4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -119,43 +119,43 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <900000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <925000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <950000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <975000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1050000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1075000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1112500>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1112500>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1150000>; }; @@ -165,63 +165,63 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <900000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <900000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <912500>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <912500>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <937500>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1012500>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1037500>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1062500>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1087500>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1125000>; }; - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1137500>; }; - opp@1700000000 { + opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <1175000>; }; - opp@1800000000 { + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1212500>; }; - opp@1900000000 { + opp-1900000000 { opp-hz = /bits/ 64 <1900000000>; opp-microvolt = <1262500>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index da881f5b6ed4..0f2bee028ab0 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -89,31 +89,31 @@ compatible = "operating-points-v2"; opp-shared; - opp@245000000 { + opp-245000000 { opp-hz = /bits/ 64 <245000000>; clock-latency-ns = <300>; }; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@490000000 { + opp-490000000 { opp-hz = /bits/ 64 <490000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@653334000 { + opp-653334000 { opp-hz = /bits/ 64 <653334000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@980000000 { + opp-980000000 { opp-hz = /bits/ 64 <980000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index a6b3a70dae83..19f782408d54 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -116,35 +116,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@275000000 { + opp-275000000 { opp-hz = /bits/ 64 <275000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@550000000 { + opp-550000000 { opp-hz = /bits/ 64 <550000000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@733334000 { + opp-733334000 { opp-hz = /bits/ 64 <733334000>; clock-latency-ns = <300>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <300>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; clock-latency-ns = <300>; }; @@ -154,35 +154,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@275000000 { + opp-275000000 { opp-hz = /bits/ 64 <275000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@550000000 { + opp-550000000 { opp-hz = /bits/ 64 <550000000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@733334000 { + opp-733334000 { opp-hz = /bits/ 64 <733334000>; clock-latency-ns = <300>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <300>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; clock-latency-ns = <300>; }; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index b850b2cd0adc..2c7dc69987df 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -118,27 +118,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <500000>; }; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; clock-latency-ns = <500000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <500000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <500000>; }; - opp@1188000000 { + opp-1188000000 { opp-hz = /bits/ 64 <1188000000>; clock-latency-ns = <500000>; }; -- 2.12.0.432.g71c3a4f4ba37

8 years, 2 months

5
8
0 0

v4.11-rc6 build: 0 failures 0 warnings (v4.11-rc6)

by Build bot for Mark Brown

Tree/Branch: v4.11-rc6 Git describe: v4.11-rc6 Commit: 39da7c509a Linux 4.11-rc6 Build Time: 112 min 24 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 2 months

1
0
0 0

master build: 0 failures 0 warnings (v4.11-rc5-281-g84ced7f)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.11-rc5-281-g84ced7f Commit: 84ced7fd06 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 Build Time: 112 min 37 sec Passed: 10 / 10 (100.00 %) Failed: 0 / 10 ( 0.00 %) Errors: 0 Warnings: 0 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): ------------------------------------------------------------------------------- =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm64-allmodconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allmodconfig arm-allnoconfig x86_64-allnoconfig arm-multi_v4t_defconfig arm64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel