- linaro-kernel - lists.linaro.org

Re: [RFC PATCH] ARM: kexec: Assemble relocate code in ARM mode

by Dave Martin

On Thu, Oct 10, 2013 at 11:36:08PM +0300, Taras Kondratiuk wrote: > On 10 October 2013 17:12, Dave Martin <Dave.Martin(a)arm.com> wrote: > > On Wed, Oct 09, 2013 at 11:57:03PM +0300, Taras Kondratiuk wrote: > >> In Thumb2 kernel (CONFIG_THUMB2_KERNEL) kexec's relocate code is assembled > >> in Thumb2 mode, but cpu_v7_reset() jumps to this code in ARM state, > >> because its address is page aligned and has 0 in LSB. > >> > >> Assemble this code in ARM mode to fix the issue. > > > > I think the actual issue here is that relocate_new_kernel is not properly > > annotated as a function symbol. > > > > Can you remove the explicit label declaration and try the following: > > > > #include <linux/linkage.h> > > > > ENTRY(relocate_new_kernel) > > > > /* body of relocate_new_kernel */ > > > > ENDPROC(relocate_new_kernel) > > > > > > Without this, the linker will treat it as a random pointer to data and > > never set the Thumb bit. > > > > This fails in precisely the same was as an ordinary function call > > would fail if the destination function doesn't have the needed > > annotation. > > > > > > There should be no need to switch to ARM if the kernel is just jumping > > to itself... > > I think it won't help, because here is no direct jump to this label. > This code gets copied to a new page and jump is done to the beginning > of that page. Ah, right. I think that the fncpy() function should work. This is for the precise purpsoe of copying a function body from one place to another, while reatining the Thumb bit. I have to disappear early to today, but I'll try and follow up. Currently, I have the following, but I've not been able to test it yet. If you'd like to give it a try, that would be much appreciated. Cheers ---Dave >From 94925667e650202e1baf74e1ff223671d316401d Mon Sep 17 00:00:00 2001 From: Dave Martin <Dave.Martin(a)arm.com> Date: Tue, 15 Oct 2013 11:48:46 +0100 Subject: [PATCH] ARM: kexec: Use the right ISA for relocate_new_kernel Copying a function with memcpy() and then trying to execute the result isn't portable to Thumb. This patch modifies the kexec soft restart code to copy its assembler trampoline relocate_new_kernel() using fncpy() instead, so that relocate_new_kernel can be in the same ISA as the rest of the kernel without problems. Signed-off-by: Dave Martin <Dave.Martin(a)arm.com> --- arch/arm/kernel/machine_kexec.c | 20 +++++++++----------- arch/arm/kernel/relocate_kernel.S | 7 ++++--- 2 files changed, 13 insertions(+), 14 deletions(-) diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 57221e3..ce135b3 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -11,6 +11,7 @@ #include <linux/memblock.h> #include <asm/pgtable.h> #include <linux/of_fdt.h> +#include <asm/fncpy.h> #include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> @@ -18,7 +19,7 @@ #include <asm/smp_plat.h> #include <asm/system_misc.h> -extern const unsigned char relocate_new_kernel[]; +extern char relocate_new_kernel; extern const unsigned int relocate_new_kernel_size; extern unsigned long kexec_start_address; @@ -141,8 +142,9 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { unsigned long page_list; - unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; + unsigned long v2p_offset; + void *entry_point; /* * This can only happen if machine_shutdown() failed to disable some @@ -154,10 +156,9 @@ void machine_kexec(struct kimage *image) page_list = image->head & PAGE_MASK; - /* we need both effective and real address here */ - reboot_code_buffer_phys = - page_to_pfn(image->control_code_page) << PAGE_SHIFT; reboot_code_buffer = page_address(image->control_code_page); + v2p_offset = (page_to_pfn(image->control_code_page) << PAGE_SHIFT) + - (unsigned long)reboot_code_buffer; /* Prepare parameters for reboot_code_buffer*/ kexec_start_address = image->start; @@ -168,16 +169,13 @@ void machine_kexec(struct kimage *image) /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, - relocate_new_kernel, relocate_new_kernel_size); + entry_point = fncpy(reboot_code_buffer, + &relocate_new_kernel, relocate_new_kernel_size); - - flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); if (kexec_reinit) kexec_reinit(); - soft_restart(reboot_code_buffer_phys); + soft_restart((unsigned long)entry_point + v2p_offset); } diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index d0cdedf..1492930 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -2,11 +2,11 @@ * relocate_kernel.S - put the kernel image in place to boot */ +#include <linux/linkage.h> #include <asm/kexec.h> - .globl relocate_new_kernel -relocate_new_kernel: - + .align 3 +ENTRY(relocate_new_kernel) ldr r0,kexec_indirection_page ldr r1,kexec_start_address @@ -59,6 +59,7 @@ relocate_new_kernel: ldr r2,kexec_boot_atags ARM( mov pc, lr ) THUMB( bx lr ) +ENDPROC(relocate_new_kernel) .align -- 1.7.9.5

11 years, 7 months

2
2
0 0

mainline boot: 30 pass, 1 fail (v3.12-rc6-284-ge6036c0)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc6-284-ge6036c0 Failed boot tests (console logs at the end) =========================================== sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.7 sec omap3-beagle-xm PASS: 0 min 54.2 sec am335x-bone PASS: 0 min 26.1 sec omap4-panda PASS: 1 min 5.9 sec omap4-panda-es PASS: 1 min 11.6 sec omap3-tobi,3730storm PASS: 0 min 23.8 sec omap3-tobi,3530overo PASS: 0 min 21.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 34.2 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.2 sec tegra30-beaver PASS: 0 min 14.1 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 51.2 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 2.2 sec omap4-panda-es PASS: 1 min 2.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.6 sec omap3-tobi,3730storm PASS: 0 min 22.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 20.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.93 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

next-thierry boot: 25 pass, 6 fail (next-20131023)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next-thierry Git describe: next-20131023 Failed boot tests (console logs at the end) =========================================== imx6q-wandboard: FAIL: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 0 min 50.4 sec am335x-bone PASS: 0 min 26.7 sec omap4-panda PASS: 1 min 5.4 sec omap4-panda-es PASS: 1 min 5.7 sec omap3-tobi,3730storm PASS: 0 min 23.9 sec omap3-tobi,3530overo PASS: 0 min 21.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec imx6q-wandboard FAIL: 0 min 10.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 33.4 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 23.3 sec tegra30-beaver PASS: 0 min 17.5 sec am335x-boneblack PASS: 0 min 34.8 sec omap3-beagle-xm PASS: 0 min 49.9 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 3.7 sec omap4-panda-es PASS: 1 min 3.5 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 21.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec am335x-bone PASS: 0 min 33.6 sec imx6q-wandboard PASS: 0 min 15.9 sec omap3-tobi,3730storm PASS: 0 min 19.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.8 sec omap3-tobi,3530overo PASS: 0 min 19.6 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 19.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:8084b024 r5:00000000 r4:808727b0 r3:00000000 [<80012420>] (show_stack+0x0/0x1c) from [<805fde98>] (dump_stack+0x84/0x9c) [<805fde14>] (dump_stack+0x0/0x9c) from [<80014674>] (handle_IPI+0x138/0x164) r5:80856c80 r4:00000001 [<8001453c>] (handle_IPI+0x0/0x164) from [<80008678>] (gic_handle_irq+0x5c/0x64) r8:808a3133 r7:f4000100 r6:ef0a1f70 r5:80856dd0 r4:f400010c r3:ef07d100 [<8000861c>] (gic_handle_irq+0x0/0x64) from [<80013024>] (__irq_svc+0x44/0x5c) Exception stack(0xef0a1f70 to 0xef0a1fb8) 1f60: 8000f610 ef0a1f78 00000000 00000000 1f80: ef0a0000 ef0a0000 80856908 80608414 808a3133 808a3133 ef0a0000 ef0a1fc4 1fa0: ef0a1fa8 ef0a1fb8 8007c3ec 8000f614 60000113 ffffffff r7:ef0a1fa4 r6:ffffffff r5:60000113 r4:8000f614 [<8000f5ec>] (arch_cpu_idle+0x0/0x44) from [<80061f60>] (cpu_startup_entry+0x118/0x16c) [<80061e48>] (cpu_startup_entry+0x0/0x16c) from [<80014334>] (secondary_start_kernel+0x144/0x164) r7:808a35fc r3:ef07d100 [<800141f0>] (secondary_start_kernel+0x0/0x164) from [<10008704>] (0x10008704) r5:0000001f r4:7f09006a ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address ffffffff # PYBOOT: Time: 10.61 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04a9c08>] (kernel_init_freeable+0x138/0x1d8) from [<c0383944>] (kernel_init+0x8/0x158) [<c0383944>] (kernel_init+0x8/0x158) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: eaff8acc e92d4038 e2505000 08bd8038 (e59530f0) ---[ end trace 5f393885e8e7a2ec ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc6-next-20131023 #1 [<c001582c>] (unwind_backtrace+0x0/0xf4) from [<c00116c0>] (show_stack+0x10/0x14) [<c00116c0>] (show_stack+0x10/0x14) from [<c03883b8>] (dump_stack+0x80/0x90) [<c03883b8>] (dump_stack+0x80/0x90) from [<c0014118>] (handle_IPI+0x134/0x15c) [<c0014118>] (handle_IPI+0x134/0x15c) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) from [<c00121e0>] (__irq_svc+0x40/0x50) Exception stack(0xef077fa0 to 0xef077fe8) 7fa0: c0fa65f8 00000000 0000094c 0000094c ef076000 c04dc458 c038e744 ef076000 7fc0: c050316d 00000001 c050316d ef076000 00000000 ef077fe8 c000f40c c0052764 7fe0: 60000113 ffffffff [<c00121e0>] (__irq_svc+0x40/0x50) from [<c0052764>] (cpu_startup_entry+0x10c/0x14c) [<c0052764>] (cpu_startup_entry+0x10c/0x14c) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 2800f3f0 # PYBOOT: Time: 20.11 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 tmp/arndale-QrwgNZ/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.171 Filename 'tmp/arndale-QrwgNZ/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33005 (80ed hex) ARNDALE5250 #printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.171:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb0ec Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.42 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- [ 1.019470] [<c04b15c8>] (kernel_init+0x8/0x158) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) [ 1.027923] Code: ebfffd0b e3500000 e589000c 0a000059 (e5903038) [ 1.034027] ---[ end trace e96b7600eff60690 ]--- [ 1.038665] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.038665] [ 1.047790] CPU1: stopping [ 1.050506] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc6-next-20131023 #1 [ 1.058929] [<c0014dfc>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 1.067474] [<c0011810>] (show_stack+0x10/0x14) from [<c04b55b8>] (dump_stack+0x84/0x94) [ 1.075561] [<c04b55b8>] (dump_stack+0x84/0x94) from [<c00130bc>] (handle_IPI+0x138/0x160) [ 1.083831] [<c00130bc>] (handle_IPI+0x138/0x160) from [<c00087a8>] (gic_handle_irq+0x58/0x5c) [ 1.092437] [<c00087a8>] (gic_handle_irq+0x58/0x5c) from [<c0012340>] (__irq_svc+0x40/0x50) [ 1.100769] Exception stack(0xee89ff98 to 0xee89ffe0) [ 1.105804] ff80: c12de5f0 00000000 [ 1.113983] ffa0: 0000053c c0019c20 ee89e000 c06c8478 c04bf540 ee89e000 c0752656 00000001 [ 1.122161] ffc0: c0752656 ee89e000 00000000 ee89ffe0 c000f570 c000f574 60000113 ffffffff [ 1.130340] [<c0012340>] (__irq_svc+0x40/0x50) from [<c000f574>] (arch_cpu_idle+0x38/0x3c) [ 1.138610] [<c000f574>] (arch_cpu_idle+0x38/0x3c) from [<c007a0d8>] (cpu_startup_entry+0x118/0x158) [ 1.147735] [<c007a0d8>] (cpu_startup_entry+0x118/0x158) from [<000088e4>] (0x88e4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address fddf8033 # PYBOOT: Time: 23.31 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [ 159.703041] [<c0648d78>] (kernel_init_freeable+0x13c/0x1dc) from [<c04b15c8>] (kernel_init+0x8/0x158) [ 159.712291] [<c04b15c8>] (kernel_init+0x8/0x158) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) [ 159.720752] Code: eaff2dd3 e92d4038 e2505000 08bd8038 (e59530f0) [ 159.726895] ---[ end trace 0dbfaf7fff5b37f8 ]--- [ 159.731543] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 159.731543] [ 159.740704] CPU1: stopping [ 159.743423] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc6-next-20131023 #1 [ 159.751893] [<c0014dfc>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 159.760447] [<c0011810>] (show_stack+0x10/0x14) from [<c04b55b8>] (dump_stack+0x84/0x94) [ 159.768563] [<c04b55b8>] (dump_stack+0x84/0x94) from [<c00130bc>] (handle_IPI+0x138/0x160) [ 159.776851] [<c00130bc>] (handle_IPI+0x138/0x160) from [<c0008700>] (armada_370_xp_handle_irq+0xac/0xb0) [ 159.786358] [<c0008700>] (armada_370_xp_handle_irq+0xac/0xb0) from [<c0012340>] (__irq_svc+0x40/0x50) [ 159.795599] Exception stack(0xee877fa0 to 0xee877fe8) [ 159.800665] 7fa0: c12da5f0 00000000 000009de 000009de ee876000 c06c8478 c04bf540 ee876000 [ 159.808865] 7fc0: c0752656 00000001 c0752656 ee876000 c070aa00 ee877fe8 c000f570 c007a0d8 [ 159.817062] 7fe0: 60000113 ffffffff [ 159.820568] [<c0012340>] (__irq_svc+0x40/0x50) from [<c007a0d8>] (cpu_startup_entry+0x118/0x158) [ 159.829379] [<c007a0d8>] (cpu_startup_entry+0x118/0x158) from [<000088e4>] (0x88e4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address abbbc0e3 # PYBOOT: Time: 21.55 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- [<c02b8a28>] (__clk_lookup_subtree+0x18/0x68) from [<c02b8a50>] (__clk_lookup_subtree+0x40/0x68) Code: 1afffffb e12fff1e e1a03000 eafffff8 (e4d03001) ---[ end trace 6f0dfe09448de65a ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc6-next-20131023 #1 [<c0015484>] (unwind_backtrace+0x0/0xf4) from [<c00118a8>] (show_stack+0x10/0x14) [<c00118a8>] (show_stack+0x10/0x14) from [<c03a9ab8>] (dump_stack+0x98/0xc4) [<c03a9ab8>] (dump_stack+0x98/0xc4) from [<c00138fc>] (handle_IPI+0x130/0x144) [<c00138fc>] (handle_IPI+0x130/0x144) from [<c0008578>] (gic_handle_irq+0x58/0x5c) [<c0008578>] (gic_handle_irq+0x58/0x5c) from [<c0012400>] (__irq_svc+0x40/0x70) Exception stack(0xef07ff98 to 0xef07ffe0) ff80: ffffffed 00b0a000 ffa0: c0540d6c 00000000 ef07e000 c0540428 c03b0aa4 ef07e000 c056a167 00000001 ffc0: c056a167 ef07e000 00000000 ef07ffe0 c000f600 c000f5f8 60000113 ffffffff [<c0012400>] (__irq_svc+0x40/0x70) from [<c000f5f8>] (arch_cpu_idle+0x2c/0x38) [<c000f5f8>] (arch_cpu_idle+0x2c/0x38) from [<c00526c0>] (cpu_startup_entry+0x114/0x154) [<c00526c0>] (cpu_startup_entry+0x114/0x154) from [<00008604>] (0x8604) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 000003e8 # PYBOOT: Time: 19.15 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

[RESEND PATCH] configs: add network namespace and virtual ethernet

by Zi Shen Lim

Network namespace and virtual ethernet are a useful combination for networking related testing, containers, etc. Enable namespaces, which by default includes network namespace. Also enable virtual ethernet support. Signed-off-by: Zi Shen Lim <zishen.lim(a)linaro.org> --- linaro/configs/netns.conf | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 linaro/configs/netns.conf diff --git a/linaro/configs/netns.conf b/linaro/configs/netns.conf new file mode 100644 index 0000000..7fadd7d --- /dev/null +++ b/linaro/configs/netns.conf @@ -0,0 +1,2 @@ +CONFIG_NAMESPACES=y +CONFIG_VETH=y -- 1.8.1.2

11 years, 7 months

2
1
0 0

[PATCH 1/3] ASoC: samsung: Provide helper for DMA init

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> In preparation for using the dmaengine helpers in ASoC rather than the dmaengine wrappers for the Samsung API wrap the configuration of dma_data. The dmaengine code expects different data to that used by the legacy API. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/samsung/ac97.c | 51 +++++++++++++++--------------------------------- sound/soc/samsung/dma.c | 8 ++++++++ sound/soc/samsung/dma.h | 3 +++ sound/soc/samsung/i2s.c | 2 +- sound/soc/samsung/pcm.c | 18 +++++++++-------- 5 files changed, 38 insertions(+), 44 deletions(-) diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c index 2acf987..bd09410 100644 --- a/sound/soc/samsung/ac97.c +++ b/sound/soc/samsung/ac97.c @@ -221,24 +221,6 @@ static struct snd_ac97_bus_ops s3c_ac97_ops = { .reset = s3c_ac97_cold_reset, }; -static int s3c_ac97_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - struct s3c_dma_params *dma_data; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dma_data = &s3c_ac97_pcm_out; - else - dma_data = &s3c_ac97_pcm_in; - - snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data); - - return 0; -} - static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) { @@ -279,21 +261,6 @@ static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd, return 0; } -static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - return -ENODEV; - else - snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in); - - return 0; -} - static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) { @@ -329,15 +296,27 @@ static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream, } static const struct snd_soc_dai_ops s3c_ac97_dai_ops = { - .hw_params = s3c_ac97_hw_params, .trigger = s3c_ac97_trigger, }; static const struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = { - .hw_params = s3c_ac97_hw_mic_params, .trigger = s3c_ac97_mic_trigger, }; +static int s3c_ac97_dai_probe(struct snd_soc_dai *dai) +{ + samsung_asoc_init_dma_data(dai, &s3c_ac97_pcm_out, &s3c_ac97_pcm_in); + + return 0; +} + +static int s3c_ac97_mic_dai_probe(struct snd_soc_dai *dai) +{ + samsung_asoc_init_dma_data(dai, NULL, &s3c_ac97_mic_in); + + return 0; +} + static struct snd_soc_dai_driver s3c_ac97_dai[] = { [S3C_AC97_DAI_PCM] = { .name = "samsung-ac97", @@ -354,6 +333,7 @@ static struct snd_soc_dai_driver s3c_ac97_dai[] = { .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_48000, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .probe = s3c_ac97_dai_probe, .ops = &s3c_ac97_dai_ops, }, [S3C_AC97_DAI_MIC] = { @@ -365,6 +345,7 @@ static struct snd_soc_dai_driver s3c_ac97_dai[] = { .channels_max = 1, .rates = SNDRV_PCM_RATE_8000_48000, .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .probe = s3c_ac97_mic_dai_probe, .ops = &s3c_ac97_mic_dai_ops, }, }; diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c index fe2748b..ee23194 100644 --- a/sound/soc/samsung/dma.c +++ b/sound/soc/samsung/dma.c @@ -441,6 +441,14 @@ static struct snd_soc_platform_driver samsung_asoc_platform = { .pcm_free = dma_free_dma_buffers, }; +void samsung_asoc_init_dma_data(struct snd_soc_dai *dai, + struct s3c_dma_params *playback, + struct s3c_dma_params *capture) +{ + snd_soc_dai_init_dma_data(dai, playback, capture); +} +EXPORT_SYMBOL_GPL(samsung_asoc_init_dma_data); + int samsung_asoc_dma_platform_register(struct device *dev) { return snd_soc_register_platform(dev, &samsung_asoc_platform); diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h index 0e86315..fb09a1c 100644 --- a/sound/soc/samsung/dma.h +++ b/sound/soc/samsung/dma.h @@ -22,6 +22,9 @@ struct s3c_dma_params { char *ch_name; }; +void samsung_asoc_init_dma_data(struct snd_soc_dai *dai, + struct s3c_dma_params *playback, + struct s3c_dma_params *capture); int samsung_asoc_dma_platform_register(struct device *dev); void samsung_asoc_dma_platform_unregister(struct device *dev); diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 2c4d250..9cd0a2a 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -963,7 +963,7 @@ static int samsung_i2s_dai_probe(struct snd_soc_dai *dai) } clk_prepare_enable(i2s->clk); - snd_soc_dai_init_dma_data(dai, &i2s->dma_playback, &i2s->dma_capture); + samsung_asoc_init_dma_data(dai, &i2s->dma_playback, &i2s->dma_capture); if (other) { other->addr = i2s->addr; diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c index e54256f..6a5e4bf 100644 --- a/sound/soc/samsung/pcm.c +++ b/sound/soc/samsung/pcm.c @@ -275,7 +275,6 @@ static int s3c_pcm_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai); - struct s3c_dma_params *dma_data; void __iomem *regs = pcm->regs; struct clk *clk; int sclk_div, sync_div; @@ -284,13 +283,6 @@ static int s3c_pcm_hw_params(struct snd_pcm_substream *substream, dev_dbg(pcm->dev, "Entered %s\n", __func__); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dma_data = pcm->dma_playback; - else - dma_data = pcm->dma_capture; - - snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data); - /* Strictly check for sample size */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: @@ -461,10 +453,20 @@ static const struct snd_soc_dai_ops s3c_pcm_dai_ops = { .set_fmt = s3c_pcm_set_fmt, }; +static int s3c_pcm_dai_probe(struct snd_soc_dai *dai) +{ + struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_init_dma_data(dai, pcm->dma_playback, pcm->dma_capture); + + return 0; +} + #define S3C_PCM_RATES SNDRV_PCM_RATE_8000_96000 #define S3C_PCM_DAI_DECLARE \ .symmetric_rates = 1, \ + .probe = s3c_pcm_dai_probe, \ .ops = &s3c_pcm_dai_ops, \ .playback = { \ .channels_min = 2, \ -- 1.8.4.rc3

11 years, 7 months

2
5
0 0

Re: [PATCH V2 Resend 13/34] cpufreq: ia64: Convert to light weight ->target_index() routine

by Viresh Kumar

On 22 October 2013 22:02, Luck, Tony <tony.luck(a)intel.com> wrote: >> This patch converts existing .target() to newly defined light weight >> .target_index() routine for this driver. >> >> CPUFreq core will call cpufreq_frequency_table_target() before calling this >> routine and will pass index to it. >> >> Cc: Tony Luck <tony.luck(a)intel.com> >> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> > > Tested-by: Tony Luck <tony.luck(a)intel.com> Thanks Tony.. @Rafael: Count this Tested-by for 1/34 and 31/34 as he actually tested both :)

11 years, 7 months

1
0
0 0

mainline boot: 31 pass, 2 fail (v3.12-rc6-57-g69c88dc)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc6-57-g69c88dc Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: omap2plus_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 35.0 sec omap3-beagle-xm PASS: 0 min 53.5 sec am335x-bone PASS: 0 min 26.2 sec omap3-tobi,3530overo PASS: 0 min 21.1 sec omap4-panda PASS: 1 min 9.1 sec omap4-panda-es PASS: 1 min 5.7 sec omap3-tobi,3730storm PASS: 0 min 23.8 sec omap3-beagle FAIL: 0 min 30.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.1 sec tegra30-beaver PASS: 0 min 16.4 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 52.0 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 5.6 sec omap4-panda-es PASS: 1 min 1.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 19.7 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 1 min 12.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 30.30 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.94 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

[PATCH] ASoC: dmaengine: Use filter_data rather than dma_data for compat requests

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> When using the legacy filter function channel requests we currently pass the audio specific struct snd_dmaengine_dai_dma_data which isn't likely to be helpful for actual filtering. Since there's already a field in the structure called filter_data clearly intended for use here convert the driver to use that. All existing users of plain filter functions have been converted to use an explict compat function to override this behaviour except i.MX which is working around this issue in its filter function and is updated to just use filter_data directly here. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/fsl/imx-pcm-dma.c | 4 +--- sound/soc/soc-generic-dmaengine-pcm.c | 5 ++++- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c index 4dc1296..aee2307 100644 --- a/sound/soc/fsl/imx-pcm-dma.c +++ b/sound/soc/fsl/imx-pcm-dma.c @@ -25,12 +25,10 @@ static bool filter(struct dma_chan *chan, void *param) { - struct snd_dmaengine_dai_dma_data *dma_data = param; - if (!imx_dma_is_general_purpose(chan)) return false; - chan->private = dma_data->filter_data; + chan->private = param; return true; } diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index e29ec3c..17dd379 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -126,6 +126,9 @@ static struct dma_chan *dmaengine_pcm_compat_request_channel( struct snd_pcm_substream *substream) { struct dmaengine_pcm *pcm = soc_platform_to_pcm(rtd->platform); + struct snd_dmaengine_dai_dma_data *dma_data; + + dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); if ((pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX) && pcm->chan[0]) return pcm->chan[0]; @@ -134,7 +137,7 @@ static struct dma_chan *dmaengine_pcm_compat_request_channel( return pcm->config->compat_request_channel(rtd, substream); return snd_dmaengine_pcm_request_channel(pcm->config->compat_filter_fn, - snd_soc_dai_get_dma_data(rtd->cpu_dai, substream)); + dma_data->filter_data); } static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd) -- 1.8.4.rc3

11 years, 7 months

3
2
0 0

mainline boot: 32 pass, 1 fail (v3.12-rc6-55-g93cd000)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc6-55-g93cd000 Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: omap2plus_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.6 sec omap3-beagle-xm PASS: 0 min 54.1 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec omap4-panda PASS: 1 min 9.2 sec omap4-panda-es PASS: 1 min 6.1 sec omap3-tobi,3730storm PASS: 0 min 24.0 sec omap3-beagle FAIL: 0 min 32.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.3 sec tegra30-beaver PASS: 0 min 14.1 sec am335x-boneblack PASS: 0 min 44.4 sec omap3-beagle-xm PASS: 0 min 51.9 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 6.1 sec omap4-panda-es PASS: 1 min 2.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.6 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 22.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 1 min 25.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 31.99 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

Arndale boot broken in -next

by Mark Brown

Hi, I've not yet had a chance to bisect this but it appears that Arndale boot has broken for me recently in -next; I'm getting absolutely no serial output at all afther the bootloader hands off to Linux so no useful diagnostics. Is this a known issue? I've fixed the issue Kevin identified in: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/206073.h… but this makes no difference. This haappens both with exynos_defconfig and with my normal config below: # # Automatically generated file; DO NOT EDIT. # Linux/arm 3.12.0-rc5 Kernel Configuration # CONFIG_ARM=y CONFIG_MIGHT_HAVE_PCI=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_ARCH_HAS_BANDGAP=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_NEED_MACH_MEMORY_H=y CONFIG_GENERIC_BUG=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_COMPILE_TEST=y CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_FHANDLE is not set # CONFIG_AUDIT is not set # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_KTIME_SCALAR=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_ARCH_HAS_TICK_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ_FULL is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set # CONFIG_IRQ_TIME_ACCOUNTING is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # # RCU Subsystem # CONFIG_TREE_PREEMPT_RCU=y CONFIG_PREEMPT_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_CONTEXT_TRACKING=y CONFIG_RCU_USER_QS=y # CONFIG_CONTEXT_TRACKING_FORCE is not set CONFIG_RCU_FANOUT=32 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_RCU_BOOST is not set CONFIG_RCU_NOCB_CPU=y # CONFIG_RCU_NOCB_CPU_NONE is not set # CONFIG_RCU_NOCB_CPU_ZERO is not set CONFIG_RCU_NOCB_CPU_ALL=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GENERIC_SCHED_CLOCK=y # CONFIG_CGROUPS is not set # CONFIG_CHECKPOINT_RESTORE is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y # CONFIG_USER_NS is not set CONFIG_PID_NS=y CONFIG_NET_NS=y # CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y # CONFIG_EXPERT is not set CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # # CONFIG_PERF_EVENTS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y CONFIG_SLUB_CPU_PARTIAL=y # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set # CONFIG_JUMP_LABEL is not set # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GENERIC_IDLE_POLL_SETUP=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_REL=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSGLIB is not set # CONFIG_BLK_DEV_INTEGRITY is not set # CONFIG_BLK_CMDLINE_PARSER is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_FREEZER=y # # System Type # CONFIG_MMU=y # CONFIG_ARCH_MULTIPLATFORM is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set # CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C24XX is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P64X0 is not set # CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set CONFIG_ARCH_EXYNOS=y # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP1 is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set CONFIG_PLAT_SAMSUNG=y CONFIG_SAMSUNG_PM=y # # Boot options # # CONFIG_S3C_BOOT_ERROR_RESET is not set CONFIG_S3C_BOOT_UART_FORCE_FIFO=y CONFIG_S3C_LOWLEVEL_UART_PORT=3 # CONFIG_SAMSUNG_ATAGS is not set CONFIG_SAMSUNG_DMADEV=y CONFIG_S5P_DEV_MFC=y # # Power management # # CONFIG_SAMSUNG_PM_DEBUG is not set # CONFIG_SAMSUNG_PM_CHECK is not set CONFIG_S5P_PM=y CONFIG_S5P_SLEEP=y # CONFIG_PLAT_SPEAR is not set # # SAMSUNG EXYNOS SoCs Support # CONFIG_ARCH_EXYNOS4=y CONFIG_ARCH_EXYNOS5=y # # EXYNOS SoCs # CONFIG_CPU_EXYNOS4210=y CONFIG_SOC_EXYNOS4212=y CONFIG_SOC_EXYNOS4412=y CONFIG_SOC_EXYNOS5250=y CONFIG_SOC_EXYNOS5420=y CONFIG_SOC_EXYNOS5440=y # # Flattened Device Tree based board for EXYNOS SoCs # CONFIG_MACH_EXYNOS4_DT=y CONFIG_MACH_EXYNOS5_DT=y # # Processor Type # CONFIG_CPU_V7=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y CONFIG_CPU_TLB_V7=y CONFIG_CPU_HAS_ASID=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y # # Processor Features # # CONFIG_ARM_LPAE is not set # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARM_THUMB=y # CONFIG_ARM_THUMBEE is not set CONFIG_ARM_VIRT_EXT=y CONFIG_SWP_EMULATE=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_KUSER_HELPERS=y CONFIG_OUTER_CACHE=y CONFIG_OUTER_CACHE_SYNC=y CONFIG_MIGHT_HAVE_CACHE_L2X0=y CONFIG_CACHE_L2X0=y CONFIG_CACHE_PL310=y CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_ARM_L1_CACHE_SHIFT=6 CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_ARM_NR_BANKS=8 CONFIG_MULTI_IRQ_HANDLER=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set # CONFIG_ARM_ERRATA_742230 is not set # CONFIG_ARM_ERRATA_742231 is not set # CONFIG_PL310_ERRATA_588369 is not set # CONFIG_ARM_ERRATA_643719 is not set # CONFIG_ARM_ERRATA_720789 is not set # CONFIG_PL310_ERRATA_727915 is not set # CONFIG_ARM_ERRATA_743622 is not set # CONFIG_ARM_ERRATA_751472 is not set # CONFIG_PL310_ERRATA_753970 is not set # CONFIG_ARM_ERRATA_754322 is not set # CONFIG_ARM_ERRATA_754327 is not set # CONFIG_ARM_ERRATA_764369 is not set # CONFIG_PL310_ERRATA_769419 is not set # CONFIG_ARM_ERRATA_775420 is not set # CONFIG_ARM_ERRATA_798181 is not set CONFIG_ARM_ERRATA_773022=y # # Bus support # CONFIG_ARM_AMBA=y # CONFIG_PCI is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_PCCARD is not set # # Kernel Features # CONFIG_HAVE_SMP=y CONFIG_SMP=y CONFIG_SMP_ON_UP=y CONFIG_ARM_CPU_TOPOLOGY=y # CONFIG_SCHED_MC is not set # CONFIG_SCHED_SMT is not set CONFIG_HAVE_ARM_SCU=y CONFIG_HAVE_ARM_ARCH_TIMER=y # CONFIG_MCPM is not set # CONFIG_BIG_LITTLE is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=2 CONFIG_HOTPLUG_CPU=y # CONFIG_ARM_PSCI is not set CONFIG_ARCH_NR_GPIO=512 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y CONFIG_HZ_FIXED=200 CONFIG_HZ=200 CONFIG_SCHED_HRTICK=y # CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y CONFIG_OABI_COMPAT=y CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_HAVE_ARCH_PFN_VALID=y CONFIG_HIGHMEM=y # CONFIG_HIGHPTE is not set CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_HAVE_MEMBLOCK=y # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_COMPACTION=y CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_CROSS_MEMORY_ATTACH=y # CONFIG_CLEANCACHE is not set # CONFIG_FRONTSWAP is not set # CONFIG_CMA is not set # CONFIG_ZBUD is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_XEN is not set # # Boot options # CONFIG_USE_OF=y CONFIG_ATAGS=y # CONFIG_DEPRECATED_PARAM_STRUCT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y # CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" CONFIG_CMDLINE_FROM_BOOTLOADER=y # CONFIG_CMDLINE_EXTEND is not set # CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_AUTO_ZRELADDR=y # # CPU Power Management # # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_GENERIC_CPUFREQ_CPU0=y # # ARM CPU frequency scaling drivers # CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_DT_BL_CPUFREQ=y CONFIG_ARM_EXYNOS_CPUFREQ=y CONFIG_ARM_EXYNOS4210_CPUFREQ=y CONFIG_ARM_EXYNOS4X12_CPUFREQ=y CONFIG_ARM_EXYNOS5250_CPUFREQ=y CONFIG_ARM_EXYNOS5440_CPUFREQ=y # CONFIG_ARM_KIRKWOOD_CPUFREQ is not set # # CPU Idle # CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # # ARM CPU Idle Drivers # # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set # # Floating point emulation # # # At least one emulation must be selected # # CONFIG_FPE_NWFPE is not set # CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y # CONFIG_KERNEL_MODE_NEON is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COREDUMP=y # # Power management options # CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set CONFIG_PM_RUNTIME=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_APM_EMULATION is not set CONFIG_ARCH_HAS_OPP=y CONFIG_PM_OPP=y CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_PM_GENERIC_DOMAINS_SLEEP=y CONFIG_PM_GENERIC_DOMAINS_RUNTIME=y CONFIG_CPU_PM=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARM_CPU_SUSPEND=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y # CONFIG_UNIX_DIAG is not set CONFIG_XFRM=y CONFIG_XFRM_ALGO=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_NET_IP_TUNNEL=m # CONFIG_SYN_COOKIES is not set # CONFIG_NET_IPVTI is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_INET_UDP_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_VTI is not set CONFIG_IPV6_SIT=m # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_GRE is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set CONFIG_HAVE_NET_DSA=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_MMAP is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_NET_MPLS_GSO is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_LIB80211 is not set # # CFG80211 needs to be enabled for MAC80211 # # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set CONFIG_RFKILL_REGULATOR=y # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y # # Bus devices # # CONFIG_ARM_CCI is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_DTC=y CONFIG_OF=y # # Device Tree and Open Firmware support # CONFIG_PROC_DEVICETREE=y # CONFIG_OF_SELFTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_NET=y CONFIG_OF_MDIO=y CONFIG_PARPORT=y # CONFIG_PARPORT_PC is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MG_DISK is not set # CONFIG_BLK_DEV_RBD is not set # # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_AD525X_DPOT is not set # CONFIG_ATMEL_PWM is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_ICS932S401 is not set # CONFIG_ATMEL_SSC is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_BMP085_I2C is not set # CONFIG_BMP085_SPI is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_EEPROM_93XX46 is not set # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set # CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_LIS3_I2C is not set # # Altera FPGA firmware download module # # CONFIG_ALTERA_STAPL is not set # # Intel MIC Host Driver # # # Intel MIC Card Driver # # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_THIN_PROVISIONING is not set # CONFIG_DM_CACHE is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_RAID is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_DM_FLAKEY is not set # CONFIG_DM_VERITY is not set # CONFIG_DM_SWITCH is not set # CONFIG_TARGET_CORE is not set CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_NET_CORE=y # CONFIG_BONDING is not set # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_VXLAN is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_NLMON is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_MV88E6060 is not set # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6131 is not set # CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_ETHERNET=y CONFIG_NET_VENDOR_ARC=y # CONFIG_ARC_EMAC is not set CONFIG_NET_CADENCE=y # CONFIG_ARM_AT91_ETHER is not set # CONFIG_MACB is not set CONFIG_NET_VENDOR_BROADCOM=y # CONFIG_B44 is not set # CONFIG_NET_CALXEDA_XGMAC is not set CONFIG_NET_VENDOR_CIRRUS=y # CONFIG_CS89x0 is not set # CONFIG_DM9000 is not set # CONFIG_DNET is not set CONFIG_NET_VENDOR_FARADAY=y # CONFIG_FTMAC100 is not set # CONFIG_FTGMAC100 is not set CONFIG_NET_VENDOR_INTEL=y CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_MARVELL=y # CONFIG_MVMDIO is not set CONFIG_NET_VENDOR_MICREL=y # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set CONFIG_NET_VENDOR_MICROCHIP=y # CONFIG_ENC28J60 is not set CONFIG_NET_VENDOR_NATSEMI=y CONFIG_NET_VENDOR_8390=y # CONFIG_AX88796 is not set # CONFIG_ETHOC is not set # CONFIG_SH_ETH is not set CONFIG_NET_VENDOR_SEEQ=y CONFIG_NET_VENDOR_SMSC=y # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set CONFIG_SMSC911X=y # CONFIG_SMSC911X_ARCH_HOOKS is not set CONFIG_NET_VENDOR_STMICRO=y # CONFIG_STMMAC_ETH is not set CONFIG_NET_VENDOR_VIA=y # CONFIG_VIA_VELOCITY is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_AT803X_PHY is not set # CONFIG_AMD_PHY is not set # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_BCM87XX_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_MDIO_BUS_MUX_GPIO is not set # CONFIG_MDIO_BUS_MUX_MMIOREG is not set # CONFIG_MICREL_KS8995MA is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_RTL8152 is not set CONFIG_USB_USBNET=y CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_AX88179_178A=y CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_CDC_EEM is not set CONFIG_USB_NET_CDC_NCM=y # CONFIG_USB_NET_CDC_MBIM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SR9700 is not set CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y # CONFIG_USB_NET_GL620A is not set CONFIG_USB_NET_NET1080=y # CONFIG_USB_NET_PLUSB is not set # CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set CONFIG_USB_NET_CDC_SUBSET=y # CONFIG_USB_ALI_M5632 is not set # CONFIG_USB_AN2720 is not set CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y # CONFIG_USB_EPSON2888 is not set # CONFIG_USB_KC2190 is not set CONFIG_USB_NET_ZAURUS=y # CONFIG_USB_NET_CX82310_ETH is not set # CONFIG_USB_NET_KALMIA is not set # CONFIG_USB_NET_QMI_WWAN is not set # CONFIG_USB_NET_INT51X1 is not set # CONFIG_USB_IPHETH is not set # CONFIG_USB_SIERRA_NET is not set # CONFIG_USB_VL600 is not set CONFIG_WLAN=y # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # CONFIG_WL_TI is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set CONFIG_INPUT_MATRIXKMAP=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5520 is not set # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set CONFIG_KEYBOARD_SAMSUNG=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_STMPE is not set # CONFIG_KEYBOARD_TWL4030 is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_KEYBOARD_CROS_EC=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set CONFIG_MOUSE_CYAPA=y # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_MOUSE_SYNAPTICS_USB is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_88PM860X is not set # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set CONFIG_TOUCHSCREEN_DA9034=y # CONFIG_TOUCHSCREEN_DA9052 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_EGALAX is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_ILI210X is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_WACOM_I2C is not set # CONFIG_TOUCHSCREEN_MAX11801 is not set # CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MMS114 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set # CONFIG_TOUCHSCREEN_PIXCIR is not set CONFIG_TOUCHSCREEN_WM831X=y CONFIG_TOUCHSCREEN_WM97XX=y CONFIG_TOUCHSCREEN_WM9705=y CONFIG_TOUCHSCREEN_WM9712=y CONFIG_TOUCHSCREEN_WM9713=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_MC13783 is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC_SERIO is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_TOUCHSCREEN_PCAP is not set # CONFIG_TOUCHSCREEN_ST1232 is not set # CONFIG_TOUCHSCREEN_STMPE is not set # CONFIG_TOUCHSCREEN_TPS6507X is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_AMBAKMI is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_SERIO_APBPS2 is not set # CONFIG_SERIO_OLPC_APSP is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set CONFIG_DEVKMEM=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y # CONFIG_SERIAL_8250_CONSOLE is not set CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_DW is not set # CONFIG_SERIAL_8250_EM is not set # # Non-8250 serial port support # # CONFIG_SERIAL_AMBA_PL010 is not set # CONFIG_SERIAL_AMBA_PL011 is not set CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_UARTS_4=y CONFIG_SERIAL_SAMSUNG_UARTS=4 CONFIG_SERIAL_SAMSUNG_CONSOLE=y # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX310X is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_IFX6X60 is not set # CONFIG_SERIAL_XILINX_PS_UART is not set # CONFIG_SERIAL_EFM32_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_ST_ASC is not set # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_HVC_DCC is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_ATMEL is not set # CONFIG_HW_RANDOM_EXYNOS is not set CONFIG_HW_RANDOM_TPM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set CONFIG_TCG_TPM=y CONFIG_TCG_TIS_I2C_INFINEON=y # CONFIG_TCG_ST33_I2C is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_MUX=y # # Multiplexer I2C Chip support # CONFIG_I2C_ARB_GPIO_CHALLENGE=y # CONFIG_I2C_MUX_GPIO is not set # CONFIG_I2C_MUX_PCA9541 is not set # CONFIG_I2C_MUX_PCA954x is not set # CONFIG_I2C_MUX_PINCTRL is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set # CONFIG_I2C_DESIGNWARE_PLATFORM is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_KEMPLD is not set # CONFIG_I2C_NOMADIK is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set CONFIG_HAVE_S3C2410_I2C=y CONFIG_I2C_S3C2410=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIPERBOARD is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y CONFIG_SPI_DEBUG=y CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_ALTERA=y CONFIG_SPI_ATMEL=y CONFIG_SPI_BCM2835=y CONFIG_SPI_BITBANG=y CONFIG_SPI_BUTTERFLY=y CONFIG_SPI_EFM32=y CONFIG_SPI_EP93XX=y CONFIG_SPI_GPIO=y CONFIG_SPI_IMX=y CONFIG_SPI_LM70_LLP=y CONFIG_SPI_FSL_LIB=y CONFIG_SPI_FSL_SPI=y CONFIG_SPI_FSL_DSPI=y CONFIG_SPI_OC_TINY=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_TI_QSPI=y CONFIG_SPI_OMAP_100K=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y # CONFIG_SPI_PXA2XX_PCI is not set CONFIG_SPI_S3C64XX=y CONFIG_SPI_SC18IS602=y CONFIG_SPI_SH=y CONFIG_SPI_SH_HSPI=y CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_SPI_TXX9=y CONFIG_SPI_XCOMM=y CONFIG_SPI_XILINX=y CONFIG_SPI_DESIGNWARE=y CONFIG_SPI_DW_MMIO=y # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=y CONFIG_SPI_TLE62X0=y # CONFIG_HSI is not set # # PPS support # # CONFIG_PPS is not set # # PPS generators support # # # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_PINCTRL=y # # Pin controllers # CONFIG_PINMUX=y CONFIG_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set # CONFIG_PINCTRL_SINGLE is not set CONFIG_PINCTRL_SAMSUNG=y CONFIG_PINCTRL_EXYNOS=y CONFIG_PINCTRL_EXYNOS5440=y # CONFIG_PINCTRL_PALMAS is not set CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_GPIOLIB=y CONFIG_OF_GPIO=y CONFIG_DEBUG_GPIO=y # CONFIG_GPIO_SYSFS is not set # CONFIG_GPIO_DA9052 is not set # CONFIG_GPIO_DA9055 is not set CONFIG_GPIO_MAX730X=y # # Memory mapped GPIO drivers: # # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_EM is not set # CONFIG_GPIO_PL061 is not set # CONFIG_GPIO_RCAR is not set # CONFIG_GPIO_TS5500 is not set # CONFIG_GPIO_GRGPIO is not set # # I2C GPIO expanders: # CONFIG_GPIO_ARIZONA=y # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_RC5T583 is not set # CONFIG_GPIO_SX150X is not set # CONFIG_GPIO_STMPE is not set # CONFIG_GPIO_TPS65912 is not set # CONFIG_GPIO_TWL4030 is not set # CONFIG_GPIO_TWL6040 is not set CONFIG_GPIO_WM831X=y CONFIG_GPIO_WM8350=y CONFIG_GPIO_WM8994=y # CONFIG_GPIO_ADP5520 is not set # CONFIG_GPIO_ADP5588 is not set # CONFIG_GPIO_ADNP is not set # # PCI GPIO expanders: # # # SPI GPIO expanders: # CONFIG_GPIO_MAX7301=y # CONFIG_GPIO_MCP23S08 is not set CONFIG_GPIO_MC33880=y CONFIG_GPIO_74X164=y # # AC97 GPIO expanders: # # # LPC GPIO expanders: # # CONFIG_GPIO_KEMPLD is not set # # MODULbus GPIO expanders: # CONFIG_GPIO_PALMAS=y # CONFIG_GPIO_TPS6586X is not set # CONFIG_GPIO_TPS65910 is not set # CONFIG_GPIO_BCM_KONA is not set # # USB GPIO expanders: # # CONFIG_GPIO_VIPERBOARD is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_POWER_AVS is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y CONFIG_MFD_AS3711=y CONFIG_PMIC_ADP5520=y CONFIG_MFD_AAT2870_CORE=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_I2C=y CONFIG_MFD_CROS_EC_SPI=y # CONFIG_MFD_ASIC3 is not set CONFIG_PMIC_DA903X=y CONFIG_PMIC_DA9052=y CONFIG_MFD_DA9052_SPI=y CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_DA9055=y CONFIG_MFD_DA9063=y CONFIG_MFD_MC13783=y CONFIG_MFD_MC13XXX=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_MFD_MC13XXX_I2C=y CONFIG_HTC_EGPIO=y CONFIG_HTC_PASIC3=y CONFIG_HTC_I2CPLD=y CONFIG_MFD_KEMPLD=y CONFIG_MFD_88PM800=y CONFIG_MFD_88PM805=y CONFIG_MFD_88PM860X=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8907=y CONFIG_MFD_MAX8925=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y CONFIG_EZX_PCAP=y CONFIG_MFD_VIPERBOARD=y CONFIG_MFD_RETU=y CONFIG_MFD_PCF50633=y CONFIG_PCF50633_ADC=y CONFIG_PCF50633_GPIO=y # CONFIG_UCB1400_CORE is not set CONFIG_MFD_RC5T583=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_SI476X_CORE=y CONFIG_MFD_SM501=y CONFIG_MFD_SM501_GPIO=y CONFIG_MFD_SMSC=y CONFIG_ABX500_CORE=y CONFIG_AB3100_CORE=y CONFIG_AB3100_OTP=y CONFIG_MFD_STMPE=y # # STMicroelectronics STMPE Interface Drivers # CONFIG_STMPE_I2C=y CONFIG_STMPE_SPI=y CONFIG_MFD_SYSCON=y CONFIG_MFD_TI_AM335X_TSCADC=y CONFIG_MFD_LP8788=y CONFIG_MFD_PALMAS=y CONFIG_TPS6105X=y CONFIG_TPS65010=y CONFIG_TPS6507X=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65912=y CONFIG_MFD_TPS65912_I2C=y CONFIG_MFD_TPS65912_SPI=y CONFIG_MFD_TPS80031=y CONFIG_TWL4030_CORE=y CONFIG_TWL4030_MADC=y CONFIG_TWL4030_POWER=y CONFIG_MFD_TWL4030_AUDIO=y CONFIG_TWL6040_CORE=y CONFIG_MFD_WL1273_CORE=y CONFIG_MFD_LM3533=y # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set CONFIG_MFD_ARIZONA=y CONFIG_MFD_ARIZONA_I2C=y CONFIG_MFD_ARIZONA_SPI=y CONFIG_MFD_WM5102=y CONFIG_MFD_WM5110=y CONFIG_MFD_WM8997=y CONFIG_MFD_WM8400=y CONFIG_MFD_WM831X=y CONFIG_MFD_WM831X_I2C=y CONFIG_MFD_WM831X_SPI=y CONFIG_MFD_WM8350=y CONFIG_MFD_WM8350_I2C=y CONFIG_MFD_WM8994=y # CONFIG_VEXPRESS_CONFIG is not set CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set CONFIG_REGULATOR_88PM800=y CONFIG_REGULATOR_88PM8607=y CONFIG_REGULATOR_AD5398=y CONFIG_REGULATOR_ANATOP=y CONFIG_REGULATOR_AAT2870=y CONFIG_REGULATOR_AB3100=y CONFIG_REGULATOR_ARIZONA=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_DA903X=y CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_DA9055=y CONFIG_REGULATOR_DA9063=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_ISL6271A=y CONFIG_REGULATOR_LP3971=y CONFIG_REGULATOR_LP3972=y CONFIG_REGULATOR_LP872X=y CONFIG_REGULATOR_LP8755=y CONFIG_REGULATOR_LP8788=y CONFIG_REGULATOR_MAX1586=y CONFIG_REGULATOR_MAX8649=y CONFIG_REGULATOR_MAX8660=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8925=y CONFIG_REGULATOR_MAX8952=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX8998=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_MAX77693=y CONFIG_REGULATOR_MC13XXX_CORE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PCAP=y CONFIG_REGULATOR_PCF50633=y # CONFIG_REGULATOR_PFUZE100 is not set CONFIG_REGULATOR_RC5T583=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS6105X=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65090=y CONFIG_REGULATOR_TPS65217=y CONFIG_REGULATOR_TPS6524X=y CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TPS65912=y CONFIG_REGULATOR_TPS80031=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_WM831X=y CONFIG_REGULATOR_WM8350=y CONFIG_REGULATOR_WM8400=y CONFIG_REGULATOR_WM8994=y # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_DRM=y CONFIG_DRM_USB=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_KMS_FB_HELPER=y # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set # # I2C encoder or helper chips # CONFIG_DRM_I2C_CH7006=y CONFIG_DRM_I2C_SIL164=y CONFIG_DRM_I2C_NXP_TDA998X=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_DMABUF=y CONFIG_DRM_EXYNOS_FIMD=y CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_EXYNOS_VIDI=y CONFIG_DRM_EXYNOS_G2D=y CONFIG_DRM_EXYNOS_IPP=y CONFIG_DRM_EXYNOS_FIMC=y CONFIG_DRM_EXYNOS_ROTATOR=y CONFIG_DRM_EXYNOS_GSC=y CONFIG_DRM_UDL=y # CONFIG_DRM_RCAR_DU is not set # CONFIG_DRM_SHMOBILE is not set # CONFIG_DRM_TILCDC is not set # CONFIG_DRM_PANEL is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_VIDEOMODE_HELPERS=y CONFIG_HDMI=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # # CONFIG_FB_ARMCLCD is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_S3C is not set # CONFIG_FB_SM501 is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_GOLDFISH is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_AUO_K190X is not set CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_EXYNOS_DP=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_FB_SSD1307 is not set CONFIG_SOUND=y # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_DMAENGINE_PCM=y CONFIG_SND_RAWMIDI=y CONFIG_SND_COMPRESS_OFFLOAD=y CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_SEQUENCER_OSS is not set CONFIG_SND_HRTIMER=y CONFIG_SND_SEQ_HRTIMER_DEFAULT=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_RAWMIDI_SEQ=y # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_AC97_CODEC=y CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_ALOOP is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set CONFIG_SND_MTS64=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_PORTMAN2X4=y CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 CONFIG_SND_ARM=y CONFIG_SND_ARMAACI=y CONFIG_SND_SPI=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_USB_6FIRE is not set # CONFIG_SND_USB_HIFACE is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y CONFIG_SND_ATMEL_SOC=y CONFIG_SND_DESIGNWARE_I2S=y CONFIG_SND_SOC_FSL_SSI=y CONFIG_SND_SOC_FSL_SPDIF=y CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_IMX_SSI=y CONFIG_SND_SOC_IMX_PCM_DMA=y CONFIG_SND_SOC_IMX_AUDMUX=y CONFIG_SND_SOC_IMX_WM8962=y CONFIG_SND_SOC_IMX_SGTL5000=y CONFIG_SND_SOC_IMX_SPDIF=y CONFIG_SND_SOC_IMX_MC13783=y # CONFIG_SND_OMAP_SOC is not set CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_KIRKWOOD_SOC_OPENRD=y CONFIG_SND_KIRKWOOD_SOC_T5325=y CONFIG_SND_MXS_SOC=y CONFIG_SND_SOC_MXS_SGTL5000=y CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SAMSUNG_PCM=y CONFIG_SND_SAMSUNG_I2S=y CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y # CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set CONFIG_SND_SOC_SMDK_WM8994_PCM=y CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_RT5640=y CONFIG_SND_SOC_TEGRA_WM8753=y CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_I2C_AND_SPI=y CONFIG_SND_SOC_ALL_CODECS=y CONFIG_SND_SOC_88PM860X=y CONFIG_SND_SOC_ARIZONA=y CONFIG_SND_SOC_WM_HUBS=y CONFIG_SND_SOC_WM_ADSP=y CONFIG_SND_SOC_AB8500_CODEC=y CONFIG_SND_SOC_AD1836=y CONFIG_SND_SOC_AD193X=y CONFIG_SND_SOC_AD73311=y CONFIG_SND_SOC_ADAU1701=y CONFIG_SND_SOC_ADAU1373=y CONFIG_SND_SOC_ADAV80X=y CONFIG_SND_SOC_ADS117X=y CONFIG_SND_SOC_AK4104=y CONFIG_SND_SOC_AK4535=y CONFIG_SND_SOC_AK4641=y CONFIG_SND_SOC_AK4642=y CONFIG_SND_SOC_AK4671=y CONFIG_SND_SOC_AK5386=y CONFIG_SND_SOC_ALC5623=y CONFIG_SND_SOC_ALC5632=y CONFIG_SND_SOC_CS42L51=y CONFIG_SND_SOC_CS42L52=y CONFIG_SND_SOC_CS42L73=y CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4271=y CONFIG_SND_SOC_CX20442=y CONFIG_SND_SOC_JZ4740_CODEC=y CONFIG_SND_SOC_L3=y CONFIG_SND_SOC_DA7210=y CONFIG_SND_SOC_DA7213=y CONFIG_SND_SOC_DA732X=y CONFIG_SND_SOC_DA9055=y CONFIG_SND_SOC_BT_SCO=y CONFIG_SND_SOC_ISABELLE=y CONFIG_SND_SOC_LM49453=y CONFIG_SND_SOC_MAX98088=y CONFIG_SND_SOC_MAX98090=y CONFIG_SND_SOC_MAX98095=y CONFIG_SND_SOC_MAX9850=y CONFIG_SND_SOC_HDMI_CODEC=y CONFIG_SND_SOC_PCM1681=y CONFIG_SND_SOC_PCM1792A=y CONFIG_SND_SOC_PCM3008=y CONFIG_SND_SOC_RT5631=y CONFIG_SND_SOC_RT5640=y CONFIG_SND_SOC_SGTL5000=y CONFIG_SND_SOC_SI476X=y CONFIG_SND_SOC_SIGMADSP=y CONFIG_SND_SOC_SPDIF=y CONFIG_SND_SOC_SSM2518=y CONFIG_SND_SOC_SSM2602=y CONFIG_SND_SOC_STA32X=y CONFIG_SND_SOC_STA529=y CONFIG_SND_SOC_TAS5086=y CONFIG_SND_SOC_TLV320AIC23=y CONFIG_SND_SOC_TLV320AIC26=y CONFIG_SND_SOC_TLV320AIC32X4=y CONFIG_SND_SOC_TLV320AIC3X=y CONFIG_SND_SOC_TLV320DAC33=y CONFIG_SND_SOC_TWL4030=y CONFIG_SND_SOC_TWL6040=y CONFIG_SND_SOC_UDA134X=y CONFIG_SND_SOC_UDA1380=y CONFIG_SND_SOC_WL1273=y CONFIG_SND_SOC_WM0010=y CONFIG_SND_SOC_WM1250_EV1=y CONFIG_SND_SOC_WM2000=y CONFIG_SND_SOC_WM2200=y CONFIG_SND_SOC_WM5100=y CONFIG_SND_SOC_WM5102=y CONFIG_SND_SOC_WM5110=y CONFIG_SND_SOC_WM8350=y CONFIG_SND_SOC_WM8400=y CONFIG_SND_SOC_WM8510=y CONFIG_SND_SOC_WM8523=y CONFIG_SND_SOC_WM8580=y CONFIG_SND_SOC_WM8711=y CONFIG_SND_SOC_WM8727=y CONFIG_SND_SOC_WM8728=y CONFIG_SND_SOC_WM8731=y CONFIG_SND_SOC_WM8737=y CONFIG_SND_SOC_WM8741=y CONFIG_SND_SOC_WM8750=y CONFIG_SND_SOC_WM8753=y CONFIG_SND_SOC_WM8770=y CONFIG_SND_SOC_WM8776=y CONFIG_SND_SOC_WM8782=y CONFIG_SND_SOC_WM8804=y CONFIG_SND_SOC_WM8900=y CONFIG_SND_SOC_WM8903=y CONFIG_SND_SOC_WM8904=y CONFIG_SND_SOC_WM8940=y CONFIG_SND_SOC_WM8955=y CONFIG_SND_SOC_WM8960=y CONFIG_SND_SOC_WM8961=y CONFIG_SND_SOC_WM8962=y CONFIG_SND_SOC_WM8971=y CONFIG_SND_SOC_WM8974=y CONFIG_SND_SOC_WM8978=y CONFIG_SND_SOC_WM8983=y CONFIG_SND_SOC_WM8985=y CONFIG_SND_SOC_WM8988=y CONFIG_SND_SOC_WM8990=y CONFIG_SND_SOC_WM8991=y CONFIG_SND_SOC_WM8993=y CONFIG_SND_SOC_WM8994=y CONFIG_SND_SOC_WM8995=y CONFIG_SND_SOC_WM8996=y CONFIG_SND_SOC_WM8997=y CONFIG_SND_SOC_WM9081=y CONFIG_SND_SOC_WM9090=y CONFIG_SND_SOC_LM4857=y CONFIG_SND_SOC_MAX9768=y CONFIG_SND_SOC_MAX9877=y CONFIG_SND_SOC_MC13783=y CONFIG_SND_SOC_ML26124=y CONFIG_SND_SOC_TPA6130A2=y CONFIG_SND_SIMPLE_CARD=y # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y # # HID support # CONFIG_HID=y # CONFIG_HIDRAW is not set # CONFIG_UHID is not set CONFIG_HID_GENERIC=y # # Special HID drivers # CONFIG_HID_A4TECH=y # CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=y # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y # CONFIG_HID_PRODIKEYS is not set CONFIG_HID_CYPRESS=y # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set # CONFIG_HID_ELECOM is not set # CONFIG_HID_ELO is not set CONFIG_HID_EZKEY=y # CONFIG_HID_HOLTEK is not set # CONFIG_HID_HUION is not set # CONFIG_HID_KEYTOUCH is not set # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_ICADE is not set # CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO_TPKBD is not set CONFIG_HID_LOGITECH=y # CONFIG_HID_LOGITECH_DJ is not set # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set # CONFIG_HID_MAGICMOUSE is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_PRIMAX is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SPEEDLINK is not set # CONFIG_HID_STEELSERIES is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_XINMO is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set # # USB HID support # CONFIG_USB_HID=y # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ARCH_HAS_XHCI=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_EHCI_EXYNOS is not set # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_FUSBH200_HCD is not set # CONFIG_USB_FOTG210_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set CONFIG_USB_DWC3=y CONFIG_USB_DWC3_HOST=y # # Platform Glue Driver Support # CONFIG_USB_DWC3_OMAP=y CONFIG_USB_DWC3_EXYNOS=y # # Debugging features # # CONFIG_USB_DWC3_DEBUG is not set # CONFIG_USB_CHIPIDEA is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set CONFIG_USB_HSIC_USB3503=y # # USB Physical Layer drivers # CONFIG_USB_PHY=y # CONFIG_NOP_USB_XCEIV is not set # CONFIG_OMAP_CONTROL_USB is not set # CONFIG_OMAP_USB3 is not set # CONFIG_AM335X_PHY_USB is not set CONFIG_SAMSUNG_USBPHY=y CONFIG_SAMSUNG_USB2PHY=y CONFIG_SAMSUNG_USB3PHY=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ISP1301 is not set # CONFIG_USB_RCAR_PHY is not set # CONFIG_USB_RCAR_GEN2_PHY is not set # CONFIG_USB_ULPI is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # CONFIG_MMC_CLKGATE is not set # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_MINORS=8 CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_ARMMMCI is not set CONFIG_MMC_SDHCI=y # CONFIG_MMC_SDHCI_PLTFM is not set CONFIG_MMC_SDHCI_S3C=y # CONFIG_MMC_SDHCI_PXAV3 is not set # CONFIG_MMC_SDHCI_PXAV2 is not set # CONFIG_MMC_SDHCI_S3C_DMA is not set # CONFIG_MMC_OMAP_HS is not set CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y # CONFIG_MMC_DW_SOCFPGA is not set # CONFIG_MMC_VUB300 is not set # CONFIG_MMC_USHC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_SYSTOHC=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_88PM860X is not set # CONFIG_RTC_DRV_88PM80X is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_LP8788 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_MAX8907 is not set # CONFIG_RTC_DRV_MAX8925 is not set # CONFIG_RTC_DRV_MAX8998 is not set # CONFIG_RTC_DRV_MAX8997 is not set # CONFIG_RTC_DRV_MAX77686 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PALMAS is not set # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_TWL4030 is not set # CONFIG_RTC_DRV_TPS6586X is not set # CONFIG_RTC_DRV_TPS65910 is not set # CONFIG_RTC_DRV_TPS80031 is not set # CONFIG_RTC_DRV_RC5T583 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_RX4581 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_DA9052 is not set # CONFIG_RTC_DRV_DA9055 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_DS2404 is not set CONFIG_RTC_DRV_WM831X=y CONFIG_RTC_DRV_WM8350=y # CONFIG_RTC_DRV_PCF50633 is not set CONFIG_RTC_DRV_AB3100=y # # on-CPU RTC drivers # CONFIG_HAVE_S3C_RTC=y CONFIG_RTC_DRV_S3C=y # CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set # CONFIG_RTC_DRV_PCAP is not set # CONFIG_RTC_DRV_MC13XXX is not set # CONFIG_RTC_DRV_SNVS is not set # CONFIG_RTC_DRV_MOXART is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # # CONFIG_AMBA_PL08X is not set # CONFIG_DW_DMAC_CORE is not set # CONFIG_DW_DMAC is not set # CONFIG_TIMB_DMA is not set CONFIG_PL330_DMA=y CONFIG_DMA_ENGINE=y CONFIG_DMA_OF=y # # DMA Clients # # CONFIG_NET_DMA is not set # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_VIRT_DRIVERS is not set # # Virtio drivers # # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # # CONFIG_STAGING is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # # Common Clock Framework # # CONFIG_COMMON_CLK_DEBUG is not set CONFIG_COMMON_CLK_WM831X=y CONFIG_COMMON_CLK_MAX77686=y # CONFIG_COMMON_CLK_SI5351 is not set # CONFIG_COMMON_CLK_S2MPS11 is not set CONFIG_CLK_TWL6040=y # # Hardware Spinlock drivers # CONFIG_CLKSRC_OF=y CONFIG_ARM_ARCH_TIMER=y CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y CONFIG_CLKSRC_EXYNOS_MCT=y CONFIG_CLKSRC_SAMSUNG_PWM=y # CONFIG_MAILBOX is not set CONFIG_IOMMU_SUPPORT=y CONFIG_OF_IOMMU=y # # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set # # Rpmsg drivers # # CONFIG_PM_DEVFREQ is not set CONFIG_EXTCON=y # # Extcon Device Drivers # CONFIG_OF_EXTCON=y CONFIG_EXTCON_GPIO=y CONFIG_EXTCON_ADC_JACK=y CONFIG_EXTCON_MAX77693=y CONFIG_EXTCON_MAX8997=y CONFIG_EXTCON_ARIZONA=y CONFIG_EXTCON_PALMAS=y # CONFIG_MEMORY is not set CONFIG_IIO=y CONFIG_IIO_BUFFER=y CONFIG_IIO_BUFFER_CB=y CONFIG_IIO_KFIFO_BUF=y CONFIG_IIO_TRIGGER=y CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # # Accelerometers # # CONFIG_BMA180 is not set # CONFIG_IIO_ST_ACCEL_3AXIS is not set # CONFIG_KXSD9 is not set # # Analog to digital converters # # CONFIG_AD7266 is not set # CONFIG_AD7298 is not set # CONFIG_AD7476 is not set # CONFIG_AD7791 is not set # CONFIG_AD7793 is not set # CONFIG_AD7887 is not set # CONFIG_AD7923 is not set # CONFIG_EXYNOS_ADC is not set # CONFIG_LP8788_ADC is not set # CONFIG_MAX1363 is not set # CONFIG_MCP320X is not set # CONFIG_MCP3422 is not set # CONFIG_NAU7802 is not set # CONFIG_TI_ADC081C is not set # CONFIG_TI_AM335X_ADC is not set # CONFIG_TWL6030_GPADC is not set # CONFIG_VIPERBOARD_ADC is not set # # Amplifiers # # CONFIG_AD8366 is not set # # Hid Sensor IIO Common # # # Digital to analog converters # # CONFIG_AD5064 is not set # CONFIG_AD5360 is not set # CONFIG_AD5380 is not set # CONFIG_AD5421 is not set # CONFIG_AD5446 is not set # CONFIG_AD5449 is not set # CONFIG_AD5504 is not set # CONFIG_AD5624R_SPI is not set # CONFIG_AD5686 is not set # CONFIG_AD5755 is not set # CONFIG_AD5764 is not set # CONFIG_AD5791 is not set # CONFIG_AD7303 is not set # CONFIG_MAX517 is not set # CONFIG_MCP4725 is not set # # Frequency Synthesizers DDS/PLL # # # Clock Generator/Distribution # # CONFIG_AD9523 is not set # # Phase-Locked Loop (PLL) frequency synthesizers # # CONFIG_ADF4350 is not set # # Digital gyroscope sensors # # CONFIG_ADIS16080 is not set # CONFIG_ADIS16130 is not set # CONFIG_ADIS16136 is not set # CONFIG_ADIS16260 is not set # CONFIG_ADXRS450 is not set # CONFIG_IIO_ST_GYRO_3AXIS is not set # CONFIG_ITG3200 is not set # # Inertial measurement units # # CONFIG_ADIS16400 is not set # CONFIG_ADIS16480 is not set # CONFIG_INV_MPU6050_IIO is not set # # Light sensors # # CONFIG_ADJD_S311 is not set # CONFIG_APDS9300 is not set # CONFIG_GP2AP020A00F is not set # CONFIG_SENSORS_LM3533 is not set # CONFIG_TCS3472 is not set # CONFIG_SENSORS_TSL2563 is not set # CONFIG_TSL4531 is not set # CONFIG_VCNL4000 is not set # # Magnetometer sensors # # CONFIG_AK8975 is not set # CONFIG_IIO_ST_MAGN_3AXIS is not set # # Triggers - standalone # # CONFIG_IIO_INTERRUPT_TRIGGER is not set # CONFIG_IIO_SYSFS_TRIGGER is not set # # Pressure sensors # # CONFIG_IIO_ST_PRESS is not set # # Temperature sensors # # CONFIG_TMP006 is not set # CONFIG_PWM is not set CONFIG_IRQCHIP=y CONFIG_ARM_GIC=y CONFIG_GIC_NON_BANKED=y # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # CONFIG_FMC is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set # CONFIG_PHY_EXYNOS_DP_VIDEO is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_EXT4_FS=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_QUOTACTL is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set CONFIG_ROMFS_FS=y CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_F2FS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set # CONFIG_NLS_UTF8 is not set # # Kernel hacking # # # printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 # CONFIG_BOOT_PRINTK_DELAY is not set CONFIG_DYNAMIC_DEBUG=y # # Compile-time checks and compiler options # CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_READABLE_ASM is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_SECTION_MISMATCH=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 CONFIG_DEBUG_KERNEL=y # # Memory Debugging # # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # # CONFIG_LOCKUP_DETECTOR is not set CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set CONFIG_DEBUG_PREEMPT=y # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_PI_LIST=y # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_KOBJECT_RELEASE is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_PROVE_RCU_DELAY is not set # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_RCU_CPU_STALL_VERBOSE=y # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_FTRACE_SYSCALLS is not set # CONFIG_TRACER_SNAPSHOT is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_PROBE_EVENTS is not set # # Runtime Testing # # CONFIG_LKDTM is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_RBTREE_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_STRICT_DEVMEM is not set CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y # CONFIG_DEBUG_LL is not set CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" # CONFIG_DEBUG_UART_PL01X is not set # CONFIG_DEBUG_UART_8250 is not set CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h" # CONFIG_OC_ETM is not set # CONFIG_PID_IN_CONTEXTIDR is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set CONFIG_SECURITYFS=y CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_CMAC is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32 is not set # CONFIG_CRYPTO_CRCT10DIF is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA1_ARM is not set CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_ARM is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set CONFIG_CRYPTO_HW=y # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set # CONFIG_CRC8 is not set CONFIG_ZLIB_INFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_DECOMPRESS=y CONFIG_XZ_DEC=y # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set # CONFIG_XZ_DEC_IA64 is not set CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y # CONFIG_XZ_DEC_SPARC is not set CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_DECOMPRESS_LZ4=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y # CONFIG_AVERAGE is not set # CONFIG_CORDIC is not set # CONFIG_DDR is not set CONFIG_FONT_SUPPORT=y CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set # CONFIG_FONT_8x16 is not set # CONFIG_FONT_6x11 is not set CONFIG_FONT_7x14=y # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_VIRTUALIZATION is not set Thanks, Mark

11 years, 7 months

2
3
0 0

mainline boot: 30 pass, 3 fail (v3.12-rc6-37-gd24fec3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc6-37-gd24fec3 Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: omap2plus_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig omap3-beagle: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 30.1 sec omap3-beagle-xm PASS: 0 min 53.4 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec omap4-panda PASS: 1 min 4.8 sec omap4-panda-es PASS: 1 min 5.7 sec omap3-tobi,3730storm PASS: 0 min 24.2 sec omap3-beagle FAIL: 0 min 32.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 1 min 1.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.3 sec tegra30-beaver PASS: 0 min 17.2 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 52.9 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 2.3 sec omap4-panda-es PASS: 1 min 4.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.6 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 19.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-beagle FAIL: 0 min 30.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 32.55 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.93 seconds. # PYBOOT: Result: FAIL omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 30.40 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

mainline boot: 32 pass, 1 fail (v3.12-rc6-35-gb403b73)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc6-35-gb403b73 Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: omap2plus_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.6 sec omap3-beagle-xm PASS: 0 min 53.5 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.4 sec omap4-panda PASS: 1 min 5.1 sec omap4-panda-es PASS: 1 min 4.8 sec omap3-tobi,3730storm PASS: 0 min 21.0 sec omap3-beagle FAIL: 0 min 34.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.0 sec tegra30-beaver PASS: 0 min 16.6 sec am335x-boneblack PASS: 0 min 34.5 sec omap3-beagle-xm PASS: 0 min 51.8 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 3.1 sec omap4-panda-es PASS: 1 min 3.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 19.8 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 19.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 1 min 17.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 34.41 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

[PATCH] clk / clkdev: fix the comments in clk_register_clkdev

by Hanjun Guo

'dev_id' in the comments of clk_register_clkdev should be 'dev_fmt' here. Signed-off-by: Hanjun Guo <hanjun.guo(a)linaro.org> --- drivers/clk/clkdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index 442a313..825b52b 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -270,9 +270,9 @@ EXPORT_SYMBOL(clkdev_drop); * clk_register_clkdev - register one clock lookup for a struct clk * @clk: struct clk to associate with all clk_lookups * @con_id: connection ID string on device - * @dev_id: format string describing device name + * @dev_fmt: format string describing device name * - * con_id or dev_id may be NULL as a wildcard, just as in the rest of + * con_id or dev_fmt may be NULL as a wildcard, just as in the rest of * clkdev. * * To make things easier for mass registration, we detect error clks -- 1.7.9.5

11 years, 7 months

1
0
0 0

[PATCH] cpufreq: acpi: Add comment under ACPI_ADR_SPACE_SYSTEM_IO case

by Viresh Kumar

policy->cur is now set by cpufreq core when cpufreq_driver->get() is defined and so drivers aren't required to set it. When space_id is ACPI_ADR_SPACE_SYSTEM_IO for acpi cpufreq driver it doesn't set ->get to a valid function pointer and so policy->cur is required to be set by driver. This is already followed in acpi-cpufreq driver. This patch adds a comment describing why we need to set policy->cur from driver. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- This change was requested by Rafael here: http://www.spinics.net/lists/linux-acpi/msg46748.html drivers/cpufreq/acpi-cpufreq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index a8dac7b..8ecd74e 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -838,6 +838,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) switch (perf->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: /* Current speed is unknown and not detectable by IO port */ + /* ->cur wouldn't be set by core as ->get() is NULL */ policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); break; case ACPI_ADR_SPACE_FIXED_HARDWARE: -- 1.7.12.rc2.18.g61b472e

11 years, 7 months

2
7
0 0

next-thierry boot: 25 pass, 8 fail (next-20131021)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next-thierry Git describe: next-20131021 Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: omap2plus_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 0 min 52.0 sec am335x-bone PASS: 0 min 26.7 sec omap3-tobi,3530overo PASS: 0 min 21.5 sec omap4-panda PASS: 1 min 10.1 sec omap4-panda-es PASS: 1 min 5.2 sec omap3-tobi,3730storm PASS: 0 min 23.8 sec omap3-beagle FAIL: 2 min 5.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard FAIL: 0 min 10.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 33.5 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 20.4 sec tegra30-beaver PASS: 0 min 21.2 sec am335x-boneblack PASS: 0 min 34.9 sec omap3-beagle-xm PASS: 0 min 50.0 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 3.6 sec omap4-panda-es PASS: 1 min 2.8 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 21.5 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 19.8 sec am335x-bone PASS: 0 min 33.6 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 22.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.8 sec omap3-beagle PASS: 1 min 27.5 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 22.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/3530beagle-jUA7jX/zImage'. Load address: 0x80200000 Loading: *T T T T T Abort OMAP3 beagleboard.org # tftp 0x80200000 tmp/3530beagle-jUA7jX/zImage tftp 0x80200000 tmp/3530beagle-jUA7jX/zImage EHCI timed out on TD - token=0x80008c80 EHCI timed out on TD - token=0x80008d80 ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() OMAP3 beagleboard.org # tftp 0x80200000 tmp/3530beagle-jUA7jX/zImage <INTERRUPT> OMAP3 beagleboard.org # tftp 0x80200000 tmp/3530beagle-jUA7jX/zImage EHCI timed out on TD - token=0x80008c80 EHCI timed out on TD - token=0x80008d80 ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() OMAP3 beagleboard.org # ~$off # PYBOOT: Exception: ERROR: Timeout loading tmp/3530beagle-jUA7jX/zImage. Giving up. # PYBOOT: Time: 125.39 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- [<80012160>] (dump_backtrace+0x0/0x10c) from [<80012438>] (show_stack+0x18/0x1c) r6:8084b024 r5:00000000 r4:80872770 r3:00000000 [<80012420>] (show_stack+0x0/0x1c) from [<805fdc58>] (dump_stack+0x84/0x9c) [<805fdbd4>] (dump_stack+0x0/0x9c) from [<80014674>] (handle_IPI+0x138/0x164) r5:80856c80 r4:00000002 [<8001453c>] (handle_IPI+0x0/0x164) from [<80008678>] (gic_handle_irq+0x5c/0x64) r8:808a30f3 r7:f4000100 r6:ef0a3f70 r5:80856dd0 r4:f400010c r3:ef07da00 [<8000861c>] (gic_handle_irq+0x0/0x64) from [<80013024>] (__irq_svc+0x44/0x5c) Exception stack(0xef0a3f70 to 0xef0a3fb8) 3f60: 8000f610 ef0a3f78 00000000 00000000 3f80: ef0a2000 ef0a2000 80856908 80608414 808a30f3 808a30f3 ef0a2000 ef0a3fc4 3fa0: ef0a3fa8 ef0a3fb8 8007c4b0 8000f614 60000113 ffffffff r7:ef0a3fa4 r6:ffffffff r5:60000113 r4:8000f614 [<8000f5ec>] (arch_cpu_idle+0x0/0x44) from [<80062024>] (cpu_startup_entry+0x118/0x16c) [<80061f0c>] (cpu_startup_entry+0x0/0x16c) from [<80014334>] (secondary_start_kernel+0x144/0x164) r7:808a35bc r3:ef07da00 [<800141f0>] (secondary_start_kernel+0x0/0x164) from [<10008704>] (0x10008704) r5:0000001f r4:7f09006a ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address ffffffff # PYBOOT: Time: 10.78 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04aac08>] (kernel_init_freeable+0x138/0x1d8) from [<c0383ac0>] (kernel_init+0x8/0x158) [<c0383ac0>] (kernel_init+0x8/0x158) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: eaff8acc e92d4038 e2505000 08bd8038 (e59530f0) ---[ end trace d5976dfd30a5d35b ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc6-next-20131021 #1 [<c001582c>] (unwind_backtrace+0x0/0xf4) from [<c00116c0>] (show_stack+0x10/0x14) [<c00116c0>] (show_stack+0x10/0x14) from [<c0388534>] (dump_stack+0x80/0x90) [<c0388534>] (dump_stack+0x80/0x90) from [<c0014118>] (handle_IPI+0x134/0x15c) [<c0014118>] (handle_IPI+0x134/0x15c) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) from [<c00121e0>] (__irq_svc+0x40/0x50) Exception stack(0xef077fa0 to 0xef077fe8) 7fa0: c0fa85f8 00000000 00000942 00000942 ef076000 c04de458 c038f744 ef076000 7fc0: c05051ad 00000001 c05051ad ef076000 00000000 ef077fe8 c000f40c c005280c 7fe0: 60000113 ffffffff [<c00121e0>] (__irq_svc+0x40/0x50) from [<c005280c>] (cpu_startup_entry+0x10c/0x14c) [<c005280c>] (cpu_startup_entry+0x10c/0x14c) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 290093f2 # PYBOOT: Time: 20.10 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 tmp/arndale-Zw16u1/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.171 Filename 'tmp/arndale-Zw16u1/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33005 (80ed hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.171:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb0ec Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.45 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- [ 1.019592] [<c04b1570>] (kernel_init+0x8/0x158) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) [ 1.028015] Code: ebfffd0b e3500000 e589000c 0a000059 (e5903038) [ 1.034118] ---[ end trace 0acbe34277536956 ]--- [ 1.038787] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.038787] [ 1.047912] CPU1: stopping [ 1.050598] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc6-next-20131021 #1 [ 1.059051] [<c0014dfc>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 1.067596] [<c0011810>] (show_stack+0x10/0x14) from [<c04b5560>] (dump_stack+0x84/0x94) [ 1.075683] [<c04b5560>] (dump_stack+0x84/0x94) from [<c00130bc>] (handle_IPI+0x138/0x160) [ 1.083923] [<c00130bc>] (handle_IPI+0x138/0x160) from [<c00087a8>] (gic_handle_irq+0x58/0x5c) [ 1.092529] [<c00087a8>] (gic_handle_irq+0x58/0x5c) from [<c0012340>] (__irq_svc+0x40/0x50) [ 1.100891] Exception stack(0xee89ff98 to 0xee89ffe0) [ 1.105926] ff80: c12de5f0 00000000 [ 1.114105] ffa0: 0000053e c0019c20 ee89e000 c06c8478 c04bf540 ee89e000 c0752516 00000001 [ 1.122283] ffc0: c0752516 ee89e000 00000000 ee89ffe0 c000f570 c000f574 60000113 ffffffff [ 1.130462] [<c0012340>] (__irq_svc+0x40/0x50) from [<c000f574>] (arch_cpu_idle+0x38/0x3c) [ 1.138702] [<c000f574>] (arch_cpu_idle+0x38/0x3c) from [<c007a180>] (cpu_startup_entry+0x118/0x158) [ 1.147857] [<c007a180>] (cpu_startup_entry+0x118/0x158) from [<000088e4>] (0x88e4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address fde00033 # PYBOOT: Time: 20.43 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [ 159.654274] [<c0648d78>] (kernel_init_freeable+0x13c/0x1dc) from [<c04b1570>] (kernel_init+0x8/0x158) [ 159.663524] [<c04b1570>] (kernel_init+0x8/0x158) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) [ 159.671986] Code: eaff2e10 e92d4038 e2505000 08bd8038 (e59530f0) [ 159.678130] ---[ end trace 27d2668d79f84e34 ]--- [ 159.682778] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 159.682778] [ 159.691939] CPU1: stopping [ 159.694659] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc6-next-20131021 #1 [ 159.703131] [<c0014dfc>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 159.711684] [<c0011810>] (show_stack+0x10/0x14) from [<c04b5560>] (dump_stack+0x84/0x94) [ 159.719799] [<c04b5560>] (dump_stack+0x84/0x94) from [<c00130bc>] (handle_IPI+0x138/0x160) [ 159.728087] [<c00130bc>] (handle_IPI+0x138/0x160) from [<c0008700>] (armada_370_xp_handle_irq+0xac/0xb0) [ 159.737595] [<c0008700>] (armada_370_xp_handle_irq+0xac/0xb0) from [<c0012340>] (__irq_svc+0x40/0x50) [ 159.746836] Exception stack(0xee877fa0 to 0xee877fe8) [ 159.751903] 7fa0: c12da5f0 00000000 000009d4 000009d4 ee876000 c06c8478 c04bf540 ee876000 [ 159.760103] 7fc0: c0752516 00000001 c0752516 ee876000 c070a880 ee877fe8 c000f570 c007a180 [ 159.768299] 7fe0: 60000113 ffffffff [ 159.771805] [<c0012340>] (__irq_svc+0x40/0x50) from [<c007a180>] (cpu_startup_entry+0x118/0x158) [ 159.780616] [<c007a180>] (cpu_startup_entry+0x118/0x158) from [<000088e4>] (0x88e4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address abbbc0e3 # PYBOOT: Time: 21.47 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.90 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- [<c02b8abc>] (__clk_lookup_subtree+0x18/0x68) from [<c02b8ae4>] (__clk_lookup_subtree+0x40/0x68) Code: 1afffffb e12fff1e e1a03000 eafffff8 (e4d03001) ---[ end trace d0316f3afe7ea2d5 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc6-next-20131021 #1 [<c0015484>] (unwind_backtrace+0x0/0xf4) from [<c00118a8>] (show_stack+0x10/0x14) [<c00118a8>] (show_stack+0x10/0x14) from [<c03a9bc8>] (dump_stack+0x98/0xc4) [<c03a9bc8>] (dump_stack+0x98/0xc4) from [<c00138fc>] (handle_IPI+0x130/0x144) [<c00138fc>] (handle_IPI+0x130/0x144) from [<c0008578>] (gic_handle_irq+0x58/0x5c) [<c0008578>] (gic_handle_irq+0x58/0x5c) from [<c0012400>] (__irq_svc+0x40/0x70) Exception stack(0xef07ff98 to 0xef07ffe0) ff80: ffffffed 00b0a000 ffa0: c0540d6c 00000000 ef07e000 c0540428 c03b0aa4 ef07e000 c056a167 00000001 ffc0: c056a167 ef07e000 00000000 ef07ffe0 c000f600 c000f5f8 60000113 ffffffff [<c0012400>] (__irq_svc+0x40/0x70) from [<c000f5f8>] (arch_cpu_idle+0x2c/0x38) [<c000f5f8>] (arch_cpu_idle+0x2c/0x38) from [<c0052768>] (cpu_startup_entry+0x114/0x154) [<c0052768>] (cpu_startup_entry+0x114/0x154) from [<00008604>] (0x8604) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 000003e8 # PYBOOT: Time: 22.28 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

[PATCH v2 0/2] Add GPLL, APLL, KPLL, EPLL and VPLL freq table for exynos5420 and exynos5250

by Vikas Sajjan

Adds GPLL, APLL, KPLL, EPLL and VPLL freq table for exynos5420 and exynos5250. changes since v1: - addressed comments from Tomasz Figa <tomasz.figa(a)gmail.com> is rebased on Mike's https://git.linaro.org/gitweb?p=people/mturquette/linux.git;a=shortlog;h=re… and on top of Tomasz Figa's clk clean-up patch series http://www.spinics.net/lists/arm-kernel/msg269848.html Vikas Sajjan (2): clk: samsung: Add GPLL freq table for exynos5250 SoC clk: samsung: Add APLL, KPLL, EPLL and VPLL freq table for exynos5420 SoC drivers/clk/samsung/clk-exynos5250.c | 19 ++++++++- drivers/clk/samsung/clk-exynos5420.c | 78 ++++++++++++++++++++++++++++++++++ 2 files changed, 96 insertions(+), 1 deletion(-) -- 1.7.9.5

11 years, 7 months

4
7
0 0

[PATCH] cpufreq: create per policy rwsem instead of per CPU cpu_policy_rwsem

by Viresh Kumar

We have per-CPU cpu_policy_rwsem for cpufreq core, but we never use all of them. We always use rwsem of policy->cpu and so we can actually make this rwsem per policy instead. This patch does this change. With this change other tricky situations are also avoided now, like which lock to take while we are changing policy->cpu, etc. Suggested-by: Srivatsa S. Bhat <srivatsa.bhat(a)linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat(a)linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> --- I thought I should send it formally as well. Though Andrew hasn't given his tested by until now. Rebased over your bleeding-edge branch. drivers/cpufreq/cpufreq.c | 110 +++++++++++++--------------------------------- include/linux/cpufreq.h | 14 ++++++ 2 files changed, 45 insertions(+), 79 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index ec391d7..3f03dcb 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -48,47 +48,6 @@ static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif /* - * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure - * all cpufreq/hotplug/workqueue/etc related lock issues. - * - * The rules for this semaphore: - * - Any routine that wants to read from the policy structure will - * do a down_read on this semaphore. - * - Any routine that will write to the policy structure and/or may take away - * the policy altogether (eg. CPU hotplug), will hold this lock in write - * mode before doing so. - * - * Additional rules: - * - Governor routines that can be called in cpufreq hotplug path should not - * take this sem as top level hotplug notifier handler takes this. - * - Lock should not be held across - * __cpufreq_governor(data, CPUFREQ_GOV_STOP); - */ -static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem); - -#define lock_policy_rwsem(mode, cpu) \ -static void lock_policy_rwsem_##mode(int cpu) \ -{ \ - struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); \ - BUG_ON(!policy); \ - down_##mode(&per_cpu(cpu_policy_rwsem, policy->cpu)); \ -} - -lock_policy_rwsem(read, cpu); -lock_policy_rwsem(write, cpu); - -#define unlock_policy_rwsem(mode, cpu) \ -static void unlock_policy_rwsem_##mode(int cpu) \ -{ \ - struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); \ - BUG_ON(!policy); \ - up_##mode(&per_cpu(cpu_policy_rwsem, policy->cpu)); \ -} - -unlock_policy_rwsem(read, cpu); -unlock_policy_rwsem(write, cpu); - -/* * rwsem to guarantee that cpufreq driver module doesn't unload during critical * sections */ @@ -683,14 +642,14 @@ static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) if (!down_read_trylock(&cpufreq_rwsem)) return -EINVAL; - lock_policy_rwsem_read(policy->cpu); + down_read(&policy->rwsem); if (fattr->show) ret = fattr->show(policy, buf); else ret = -EIO; - unlock_policy_rwsem_read(policy->cpu); + up_read(&policy->rwsem); up_read(&cpufreq_rwsem); return ret; @@ -711,14 +670,14 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr, if (!down_read_trylock(&cpufreq_rwsem)) goto unlock; - lock_policy_rwsem_write(policy->cpu); + down_write(&policy->rwsem); if (fattr->store) ret = fattr->store(policy, buf, count); else ret = -EIO; - unlock_policy_rwsem_write(policy->cpu); + up_write(&policy->rwsem); up_read(&cpufreq_rwsem); unlock: @@ -895,7 +854,7 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, } } - lock_policy_rwsem_write(policy->cpu); + down_write(&policy->rwsem); write_lock_irqsave(&cpufreq_driver_lock, flags); @@ -903,7 +862,7 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, per_cpu(cpufreq_cpu_data, cpu) = policy; write_unlock_irqrestore(&cpufreq_driver_lock, flags); - unlock_policy_rwsem_write(policy->cpu); + up_write(&policy->rwsem); if (has_target) { if ((ret = __cpufreq_governor(policy, CPUFREQ_GOV_START)) || @@ -950,6 +909,8 @@ static struct cpufreq_policy *cpufreq_policy_alloc(void) goto err_free_cpumask; INIT_LIST_HEAD(&policy->policy_list); + init_rwsem(&policy->rwsem); + return policy; err_free_cpumask: @@ -972,19 +933,12 @@ static void update_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu) if (WARN_ON(cpu == policy->cpu)) return; - /* - * Take direct locks as lock_policy_rwsem_write wouldn't work here. - * Also lock for last cpu is enough here as contention will happen only - * after policy->cpu is changed and after it is changed, other threads - * will try to acquire lock for new cpu. And policy is already updated - * by then. - */ - down_write(&per_cpu(cpu_policy_rwsem, policy->cpu)); + down_write(&policy->rwsem); policy->last_cpu = policy->cpu; policy->cpu = cpu; - up_write(&per_cpu(cpu_policy_rwsem, policy->last_cpu)); + up_write(&policy->rwsem); cpufreq_frequency_table_update_policy_cpu(policy); blocking_notifier_call_chain(&cpufreq_policy_notifier_list, @@ -1176,9 +1130,9 @@ static int cpufreq_nominate_new_policy_cpu(struct cpufreq_policy *policy, if (ret) { pr_err("%s: Failed to move kobj: %d", __func__, ret); - lock_policy_rwsem_write(old_cpu); + down_write(&policy->rwsem); cpumask_set_cpu(old_cpu, policy->cpus); - unlock_policy_rwsem_write(old_cpu); + up_write(&policy->rwsem); ret = sysfs_create_link(&cpu_dev->kobj, &policy->kobj, "cpufreq"); @@ -1229,9 +1183,9 @@ static int __cpufreq_remove_dev_prepare(struct device *dev, policy->governor->name, CPUFREQ_NAME_LEN); #endif - lock_policy_rwsem_read(cpu); + down_read(&policy->rwsem); cpus = cpumask_weight(policy->cpus); - unlock_policy_rwsem_read(cpu); + up_read(&policy->rwsem); if (cpu != policy->cpu) { if (!frozen) @@ -1271,12 +1225,12 @@ static int __cpufreq_remove_dev_finish(struct device *dev, return -EINVAL; } - lock_policy_rwsem_write(cpu); + down_write(&policy->rwsem); cpus = cpumask_weight(policy->cpus); if (cpus > 1) cpumask_clear_cpu(cpu, policy->cpus); - unlock_policy_rwsem_write(cpu); + up_write(&policy->rwsem); /* If cpu is last user of policy, free policy */ if (cpus == 1) { @@ -1291,10 +1245,10 @@ static int __cpufreq_remove_dev_finish(struct device *dev, } if (!frozen) { - lock_policy_rwsem_read(cpu); + down_read(&policy->rwsem); kobj = &policy->kobj; cmp = &policy->kobj_unregister; - unlock_policy_rwsem_read(cpu); + up_read(&policy->rwsem); kobject_put(kobj); /* @@ -1474,19 +1428,22 @@ static unsigned int __cpufreq_get(unsigned int cpu) */ unsigned int cpufreq_get(unsigned int cpu) { + struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); unsigned int ret_freq = 0; if (cpufreq_disabled() || !cpufreq_driver) return -ENOENT; + BUG_ON(!policy); + if (!down_read_trylock(&cpufreq_rwsem)) return 0; - lock_policy_rwsem_read(cpu); + down_read(&policy->rwsem); ret_freq = __cpufreq_get(cpu); - unlock_policy_rwsem_read(cpu); + up_read(&policy->rwsem); up_read(&cpufreq_rwsem); return ret_freq; @@ -1710,11 +1667,11 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, { int ret = -EINVAL; - lock_policy_rwsem_write(policy->cpu); + down_write(&policy->rwsem); ret = __cpufreq_driver_target(policy, target_freq, relation); - unlock_policy_rwsem_write(policy->cpu); + up_write(&policy->rwsem); return ret; } @@ -1945,10 +1902,10 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy, /* end old governor */ if (policy->governor) { __cpufreq_governor(policy, CPUFREQ_GOV_STOP); - unlock_policy_rwsem_write(new_policy->cpu); + up_write(&policy->rwsem); __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); - lock_policy_rwsem_write(new_policy->cpu); + down_write(&policy->rwsem); } /* start new governor */ @@ -1957,10 +1914,10 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy, if (!__cpufreq_governor(policy, CPUFREQ_GOV_START)) { failed = 0; } else { - unlock_policy_rwsem_write(new_policy->cpu); + up_write(&policy->rwsem); __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); - lock_policy_rwsem_write(new_policy->cpu); + down_write(&policy->rwsem); } } @@ -2006,7 +1963,7 @@ int cpufreq_update_policy(unsigned int cpu) goto no_policy; } - lock_policy_rwsem_write(cpu); + down_write(&policy->rwsem); pr_debug("updating policy for CPU %u\n", cpu); memcpy(&new_policy, policy, sizeof(*policy)); @@ -2033,7 +1990,7 @@ int cpufreq_update_policy(unsigned int cpu) ret = cpufreq_set_policy(policy, &new_policy); - unlock_policy_rwsem_write(cpu); + up_write(&policy->rwsem); cpufreq_cpu_put(policy); no_policy: @@ -2190,14 +2147,9 @@ EXPORT_SYMBOL_GPL(cpufreq_unregister_driver); static int __init cpufreq_core_init(void) { - int cpu; - if (cpufreq_disabled()) return -ENODEV; - for_each_possible_cpu(cpu) - init_rwsem(&per_cpu(cpu_policy_rwsem, cpu)); - cpufreq_global_kobject = kobject_create(); BUG_ON(!cpufreq_global_kobject); register_syscore_ops(&cpufreq_syscore_ops); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 0aba2a6c..6b457d0 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -85,6 +85,20 @@ struct cpufreq_policy { struct list_head policy_list; struct kobject kobj; struct completion kobj_unregister; + + /* + * The rules for this semaphore: + * - Any routine that wants to read from the policy structure will + * do a down_read on this semaphore. + * - Any routine that will write to the policy structure and/or may take away + * the policy altogether (eg. CPU hotplug), will hold this lock in write + * mode before doing so. + * + * Additional rules: + * - Lock should not be held across + * __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + */ + struct rw_semaphore rwsem; }; /* Only for ACPI */ -- 1.7.12.rc2.18.g61b472e

11 years, 7 months

2
2
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc6-3-g0df651a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc6-3-g0df651a Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.6 sec omap3-beagle-xm PASS: 0 min 51.4 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.2 sec omap4-panda PASS: 1 min 6.5 sec omap4-panda-es PASS: 1 min 6.0 sec omap3-tobi,3730storm PASS: 0 min 20.7 sec omap3-beagle PASS: 1 min 12.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.6 sec tegra30-beaver PASS: 0 min 16.7 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 47.1 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 2.5 sec omap4-panda-es PASS: 1 min 1.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.6 sec am335x-bone PASS: 0 min 38.2 sec imx6q-wandboard PASS: 0 min 15.6 sec omap3-tobi,3730storm PASS: 0 min 22.0 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 1 min 31.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 7 months

1
0
0 0

[PATCH] ASoC: si476x: Fix locking of core

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> The conversion of the si476x to regmap removed locking of the core during register updates, allowing things like power state changes for the MFD to happen during a register update. Avoid this by taking the core lock in the DAI operations (which are the only things that do register updates) as we used to do in the open coded register I/O functions. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/si476x.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/si476x.c b/sound/soc/codecs/si476x.c index 03645ce..52e7cb0 100644 --- a/sound/soc/codecs/si476x.c +++ b/sound/soc/codecs/si476x.c @@ -73,6 +73,7 @@ static const struct snd_soc_dapm_route si476x_dapm_routes[] = { static int si476x_codec_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { + struct si476x_core *core = i2c_mfd_cell_to_core(codec_dai->dev); int err; u16 format = 0; @@ -136,9 +137,14 @@ static int si476x_codec_set_dai_fmt(struct snd_soc_dai *codec_dai, return -EINVAL; } + si476x_core_lock(core); + err = snd_soc_update_bits(codec_dai->codec, SI476X_DIGITAL_IO_OUTPUT_FORMAT, SI476X_DIGITAL_IO_OUTPUT_FORMAT_MASK, format); + + si476x_core_unlock(core); + if (err < 0) { dev_err(codec_dai->codec->dev, "Failed to set output format\n"); return err; @@ -151,6 +157,7 @@ static int si476x_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { + struct si476x_core *core = i2c_mfd_cell_to_core(dai->dev); int rate, width, err; rate = params_rate(params); @@ -176,11 +183,13 @@ static int si476x_codec_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } + si476x_core_lock(core); + err = snd_soc_write(dai->codec, SI476X_DIGITAL_IO_OUTPUT_SAMPLE_RATE, rate); if (err < 0) { dev_err(dai->codec->dev, "Failed to set sample rate\n"); - return err; + goto out; } err = snd_soc_update_bits(dai->codec, SI476X_DIGITAL_IO_OUTPUT_FORMAT, @@ -189,10 +198,13 @@ static int si476x_codec_hw_params(struct snd_pcm_substream *substream, (width << SI476X_DIGITAL_IO_SAMPLE_SIZE_SHIFT)); if (err < 0) { dev_err(dai->codec->dev, "Failed to set output width\n"); - return err; + goto out; } - return 0; +out: + si476x_core_unlock(core); + + return err; } static int si476x_codec_probe(struct snd_soc_codec *codec) -- 1.8.4.rc3

11 years, 7 months

2
1
0 0

mainline boot: 32 pass, 1 fail (v3.12-rc6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc6 Failed boot tests (console logs at the end) =========================================== sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.6 sec omap3-beagle-xm PASS: 0 min 51.2 sec am335x-bone PASS: 0 min 31.1 sec omap3-tobi,3530overo PASS: 0 min 21.2 sec omap4-panda PASS: 1 min 8.8 sec omap4-panda-es PASS: 1 min 5.0 sec omap3-tobi,3730storm PASS: 0 min 20.3 sec omap3-beagle PASS: 1 min 6.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.0 sec tegra30-beaver PASS: 0 min 19.5 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 49.6 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 3.5 sec omap4-panda-es PASS: 1 min 1.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.5 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.7 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.6 sec omap3-tobi,3730storm PASS: 0 min 19.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 1 min 7.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.90 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

[PATCH] ASoC: imx: Open code dma channel request

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Currently the imx DMA code is one of the few users relying on the fact that the compat code uses the dma_data as the filter data for non-DT channel requests. Since the rest of the core expects this to be a struct snd_dmaengine_dai_data this isn't terribly helpful this will be changed to use the already existing filter data so avoid breaking imx by open coding the current behaviour. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/fsl/imx-pcm-dma.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/fsl/imx-pcm-dma.c b/sound/soc/fsl/imx-pcm-dma.c index 4dc1296..318f1fc 100644 --- a/sound/soc/fsl/imx-pcm-dma.c +++ b/sound/soc/fsl/imx-pcm-dma.c @@ -35,6 +35,17 @@ static bool filter(struct dma_chan *chan, void *param) return true; } +static struct dma_chan *imx_compat_request_channel( + struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_substream *substream) +{ + struct snd_dmaengine_dai_dma_data *dma_data; + + dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + + return snd_dmaengine_pcm_request_channel(filter, dma_data); +} + static const struct snd_pcm_hardware imx_pcm_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | @@ -58,6 +69,7 @@ static const struct snd_dmaengine_pcm_config imx_dmaengine_pcm_config = { .pcm_hardware = &imx_pcm_hardware, .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, .compat_filter_fn = filter, + .compat_request_channel = imx_compat_request_channel, .prealloc_buffer_size = IMX_SSI_DMABUF_SIZE, }; -- 1.8.4.rc3

11 years, 7 months

2
2
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc5-140-g31d141e)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc5-140-g31d141e Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.6 sec omap3-beagle-xm PASS: 0 min 51.9 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.2 sec omap4-panda PASS: 1 min 4.1 sec omap4-panda-es PASS: 1 min 1.6 sec omap3-tobi,3730storm PASS: 0 min 20.7 sec omap3-beagle PASS: 0 min 52.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.0 sec tegra30-beaver PASS: 0 min 17.2 sec am335x-boneblack PASS: 0 min 34.5 sec omap3-beagle-xm PASS: 0 min 51.9 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 2.5 sec omap4-panda-es PASS: 1 min 1.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.6 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 1 min 10.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 37.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 7 months

1
0
0 0

[PATCH] ASoC: dmaengine: Use filter_data rather than dma_data for compat requests

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> When using the legacy filter function channel requests we currently pass the audio specific struct snd_dmaengine_dai_dma_data which isn't likely to be helpful for actual filtering. Since there's already a field in the structure called filter_data clearly intended for use here convert the driver to use that. All existing users of plain filter functions have been converted to use an explict compat function to override this behaviour. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/soc-generic-dmaengine-pcm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 99f9495..2eea2e0 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -168,6 +168,9 @@ static struct dma_chan *dmaengine_pcm_compat_request_channel( struct snd_pcm_substream *substream) { struct dmaengine_pcm *pcm = soc_platform_to_pcm(rtd->platform); + struct snd_dmaengine_dai_dma_data *dma_data; + + dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); if ((pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX) && pcm->chan[0]) return pcm->chan[0]; @@ -176,7 +179,7 @@ static struct dma_chan *dmaengine_pcm_compat_request_channel( return pcm->config->compat_request_channel(rtd, substream); return snd_dmaengine_pcm_request_channel(pcm->config->compat_filter_fn, - snd_soc_dai_get_dma_data(rtd->cpu_dai, substream)); + dma_data->filter_data); } static int dmaengine_pcm_new(struct snd_soc_pcm_runtime *rtd) -- 1.8.4.rc3

11 years, 7 months

2
2
0 0

next-thierry boot: 24 pass, 8 fail (next-20131018)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next-thierry Git describe: next-20131018 Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: omap2plus_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 0 min 53.5 sec am335x-bone PASS: 0 min 26.8 sec omap3-tobi,3530overo PASS: 0 min 21.5 sec omap4-panda PASS: 1 min 2.2 sec omap4-panda-es PASS: 1 min 3.1 sec omap3-tobi,3730storm PASS: 0 min 20.9 sec omap3-beagle FAIL: 0 min 35.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.5 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard FAIL: 0 min 10.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 33.4 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 20.3 sec tegra30-beaver PASS: 0 min 21.5 sec am335x-boneblack PASS: 0 min 34.9 sec omap3-beagle-xm PASS: 0 min 52.5 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 2.6 sec omap4-panda-es PASS: 1 min 2.1 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 21.8 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 20.3 sec am335x-bone PASS: 0 min 33.7 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 22.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.7 sec omap3-beagle PASS: 1 min 9.5 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 22.4 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 35.06 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- r6:807ffdb8 r5:00000000 r4:8081fff0 r3:00000000 [<800120fc>] (show_stack+0x0/0x1c) from [<805dd0e4>] (dump_stack+0x84/0x9c) [<805dd060>] (dump_stack+0x0/0x9c) from [<8001435c>] (handle_IPI+0x134/0x180) r5:8080ab80 r4:00000000 [<80014228>] (handle_IPI+0x0/0x180) from [<80008668>] (gic_handle_irq+0x5c/0x64) r8:8084aaee r7:f4000100 r6:80803f40 r5:8080acd0 r4:f400010c r3:8000f58c [<8000860c>] (gic_handle_irq+0x0/0x64) from [<80012d00>] (__irq_svc+0x40/0x54) Exception stack(0x80803f40 to 0x80803f88) 3f40: 81fa2778 00000000 000009c6 8001de20 80802000 80802000 8080a908 805e6414 3f60: 8084aaee 8084aaee 80802000 80803f94 80803f98 80803f88 8000f58c 8000f590 3f80: 60000113 ffffffff r7:80803f74 r6:ffffffff r5:60000113 r4:8000f590 [<8000f558>] (arch_cpu_idle+0x0/0x44) from [<80060250>] (cpu_startup_entry+0x110/0x160) [<80060140>] (cpu_startup_entry+0x0/0x160) from [<805d76c0>] (rest_init+0x68/0x80) r7:81f9f680 r3:00000000 [<805d7658>] (rest_init+0x0/0x80) from [<807b0b00>] (start_kernel+0x2d0/0x330) [<807b0830>] (start_kernel+0x0/0x330) from [<10008074>] (0x10008074) r7:8080ebb8 r6:807f2cfc r5:8080a8a8 r4:10c53c7d ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address ffffffff # PYBOOT: Time: 10.44 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04a6c04>] (kernel_init_freeable+0x138/0x1d8) from [<c038164c>] (kernel_init+0x8/0x158) [<c038164c>] (kernel_init+0x8/0x158) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: 05121008 05031004 e15c0003 8afffff8 (e59440f0) ---[ end trace ed8d506e2ffb26e9 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc5-next-20131018 #1 [<c0015844>] (unwind_backtrace+0x0/0xf4) from [<c00116c0>] (show_stack+0x10/0x14) [<c00116c0>] (show_stack+0x10/0x14) from [<c03860bc>] (dump_stack+0x80/0x90) [<c03860bc>] (dump_stack+0x80/0x90) from [<c0014130>] (handle_IPI+0x134/0x15c) [<c0014130>] (handle_IPI+0x134/0x15c) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) from [<c00121c0>] (__irq_svc+0x40/0x50) Exception stack(0xef077fa0 to 0xef077fe8) 7fa0: c0fa05f8 00000000 000008ee 000008ee ef076000 c04d8458 c038c744 ef076000 7fc0: c04ff1cd 00000001 c04ff1cd ef076000 00000000 ef077fe8 c000f40c c0052474 7fe0: 60000113 ffffffff [<c00121c0>] (__irq_svc+0x40/0x50) from [<c0052474>] (cpu_startup_entry+0x10c/0x14c) [<c0052474>] (cpu_startup_entry+0x10c/0x14c) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 51814702 # PYBOOT: Time: 20.20 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 tmp/arndale-T9uhUD/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.171 Filename 'tmp/arndale-T9uhUD/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 32949 (80b5 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.171:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb0b4 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.43 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- [ 1.019500] [<c04ae8a0>] (kernel_init+0x8/0x158) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) [ 1.027923] Code: ebfffd0b e3500000 e589000c 0a000059 (e5903038) [ 1.034027] ---[ end trace 0593050f7bdba9b4 ]--- [ 1.038665] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.038665] [ 1.047790] CPU1: stopping [ 1.050506] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc5-next-20131018 #1 [ 1.058959] [<c0014e34>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 1.067474] [<c0011810>] (show_stack+0x10/0x14) from [<c04b2908>] (dump_stack+0x84/0x94) [ 1.075561] [<c04b2908>] (dump_stack+0x84/0x94) from [<c00130f4>] (handle_IPI+0x138/0x160) [ 1.083831] [<c00130f4>] (handle_IPI+0x138/0x160) from [<c00087a8>] (gic_handle_irq+0x58/0x5c) [ 1.092437] [<c00087a8>] (gic_handle_irq+0x58/0x5c) from [<c0012340>] (__irq_svc+0x40/0x50) [ 1.100769] Exception stack(0xee89ff98 to 0xee89ffe0) [ 1.105834] ff80: c12db5f0 00000000 [ 1.113983] ffa0: 000001c2 c0019c60 ee89e000 c06c6478 c04bc538 ee89e000 c0750c96 00000001 [ 1.122161] ffc0: c0750c96 ee89e000 00000000 ee89ffe0 c000f570 c000f574 60000113 ffffffff [ 1.130340] [<c0012340>] (__irq_svc+0x40/0x50) from [<c000f574>] (arch_cpu_idle+0x38/0x3c) [ 1.138610] [<c000f574>] (arch_cpu_idle+0x38/0x3c) from [<c0079adc>] (cpu_startup_entry+0x118/0x158) [ 1.147735] [<c0079adc>] (cpu_startup_entry+0x118/0x158) from [<000088e4>] (0x88e4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address ffaffd37 # PYBOOT: Time: 20.32 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [ 159.660577] [<c0645d70>] (kernel_init_freeable+0x13c/0x1dc) from [<c04ae8a0>] (kernel_init+0x8/0x158) [ 159.669828] [<c04ae8a0>] (kernel_init+0x8/0x158) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) [ 159.678289] Code: e3530000 15913038 e1a01003 eaff4635 (e7f001f2) [ 159.684413] ---[ end trace ce23cc2995d99435 ]--- [ 159.689072] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 159.689072] [ 159.698232] CPU0: stopping [ 159.700950] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.12.0-rc5-next-20131018 #1 [ 159.709422] [<c0014e34>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 159.717975] [<c0011810>] (show_stack+0x10/0x14) from [<c04b2908>] (dump_stack+0x84/0x94) [ 159.726089] [<c04b2908>] (dump_stack+0x84/0x94) from [<c00130f4>] (handle_IPI+0x138/0x160) [ 159.734378] [<c00130f4>] (handle_IPI+0x138/0x160) from [<c0008700>] (armada_370_xp_handle_irq+0xac/0xb0) [ 159.743886] [<c0008700>] (armada_370_xp_handle_irq+0xac/0xb0) from [<c0012340>] (__irq_svc+0x40/0x50) [ 159.753126] Exception stack(0xc06bff70 to 0xc06bffb8) [ 159.758191] ff60: c12ce5f0 00000000 0000027a 0000027a [ 159.766392] ff80: c06be000 c06c6478 c04bc538 c06be000 c0750c96 00000001 c0750c96 c06be000 [ 159.774590] ffa0: c0709100 c06bffb8 c000f570 c0079adc 60000113 ffffffff [ 159.781229] [<c0012340>] (__irq_svc+0x40/0x50) from [<c0079adc>] (cpu_startup_entry+0x118/0x158) [ 159.790043] [<c0079adc>] (cpu_startup_entry+0x118/0x158) from [<c0645ae4>] (start_kernel+0x33c/0x348) [ 159.799287] [<c0645ae4>] (start_kernel+0x33c/0x348) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 21.81 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.93 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- [<c02b75cc>] (__clk_lookup_subtree+0x18/0x68) from [<c02b75f4>] (__clk_lookup_subtree+0x40/0x68) Code: 1afffffb e12fff1e e1a03000 eafffff8 (e4d03001) ---[ end trace 11aca1c5e8df8ad2 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc5-next-20131018 #1 [<c001547c>] (unwind_backtrace+0x0/0xf4) from [<c00118a8>] (show_stack+0x10/0x14) [<c00118a8>] (show_stack+0x10/0x14) from [<c03a7dc8>] (dump_stack+0x98/0xc4) [<c03a7dc8>] (dump_stack+0x98/0xc4) from [<c00138f4>] (handle_IPI+0x130/0x144) [<c00138f4>] (handle_IPI+0x130/0x144) from [<c0008578>] (gic_handle_irq+0x58/0x5c) [<c0008578>] (gic_handle_irq+0x58/0x5c) from [<c00123c0>] (__irq_svc+0x40/0x70) Exception stack(0xef07ff98 to 0xef07ffe0) ff80: ffffffed 00b09000 ffa0: c053cd6c 00000000 ef07e000 c053c428 c03aeaa4 ef07e000 c0566067 00000001 ffc0: c0566067 ef07e000 00000000 ef07ffe0 c000f600 c000f5f8 60000113 ffffffff [<c00123c0>] (__irq_svc+0x40/0x70) from [<c000f5f8>] (arch_cpu_idle+0x2c/0x38) [<c000f5f8>] (arch_cpu_idle+0x2c/0x38) from [<c005257c>] (cpu_startup_entry+0x114/0x154) [<c005257c>] (cpu_startup_entry+0x114/0x154) from [<00008604>] (0x8604) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 000003e8 # PYBOOT: Time: 22.36 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc5-139-gbdeeab6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc5-139-gbdeeab6 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 30.3 sec omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 24.3 sec omap4-panda PASS: 1 min 6.2 sec omap4-panda-es PASS: 1 min 3.9 sec omap3-tobi,3730storm PASS: 0 min 23.7 sec omap3-beagle PASS: 0 min 56.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.2 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.5 sec tegra30-beaver PASS: 0 min 19.0 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 51.9 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 0.0 sec omap4-panda-es PASS: 1 min 1.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 19.7 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 54.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec cat: v3.12-rc5-139-gbdeeab6-boot-report.log: No such file or directory msmtp: no recipients found Traceback (most recent call last): File "/home/khilman/bin/boot-report.py", line 191, in <module> subprocess.check_output('cat %s | msmtp --read-envelope-from -t --' %maillog, shell=True) File "/usr/lib/python2.7/subprocess.py", line 544, in check_output raise CalledProcessError(retcode, cmd, output=output) subprocess.CalledProcessError: Command 'cat v3.12-rc5-139-gbdeeab6-boot-report.log | msmtp --read-envelope-from -t --' returned non-zero exit status 64

11 years, 7 months

1
0
0 0

arm-soc boot: 33 pass, 0 fail (v3.12-rc5-631-ged838ba)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.12-rc5-631-ged838ba Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 33.0 sec omap3-beagle-xm PASS: 0 min 51.8 sec am335x-bone PASS: 0 min 26.7 sec omap3-tobi,3530overo PASS: 0 min 21.4 sec omap4-panda PASS: 1 min 11.6 sec omap4-panda-es PASS: 1 min 6.3 sec omap3-tobi,3730storm PASS: 0 min 20.8 sec omap3-beagle PASS: 0 min 51.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 33.1 sec tegra30-beaver PASS: 0 min 14.2 sec am335x-boneblack PASS: 0 min 39.9 sec omap3-beagle-xm PASS: 0 min 51.9 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 5.7 sec omap4-panda-es PASS: 1 min 12.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 16.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 19.8 sec am335x-bone PASS: 0 min 33.6 sec imx6q-wandboard PASS: 0 min 15.6 sec omap3-tobi,3730storm PASS: 0 min 19.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-beagle PASS: 0 min 50.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

11 years, 7 months

1
0
0 0

queue boot: 14 pass, 3 fail (v3.10.17)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.17 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 50.1 sec am335x-bone PASS: 0 min 26.4 sec omap3-tobi,3530overo PASS: 0 min 33.4 sec omap4-panda PASS: 1 min 5.0 sec omap4-panda-es PASS: 1 min 0.6 sec omap3-tobi,3730storm PASS: 0 min 33.2 sec omap3-beagle PASS: 0 min 50.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 18.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.6 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.5 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox FAIL: 0 min 18.0 sec sun4i-a10-cubieboard FAIL: 1 min 9.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.5 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275720>] (panic+0xa0/0x1e8) [<c0275720>] (panic+0xa0/0x1e8) from [<c0326110>] (mount_block_root+0x294/0x298) [<c0326110>] (mount_block_root+0x294/0x298) from [<c03262c4>] (prepare_namespace+0x14c/0x184) [<c03262c4>] (prepare_namespace+0x14c/0x184) from [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c027147c>] (kernel_init+0x8/0x158) [<c027147c>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.17 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c001234c>] (handle_IPI+0x108/0x130) [<c001234c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0355f70 to 0xc0355fb8) 5f60: c1d566d8 00000000 000000ba 000000ba 5f80: c037fa2c c035c4a8 c027ceb0 c0354000 c037fa2c c0354000 c0354000 c035c45c 5fa0: 0000001f c0355fb8 c000f070 c004f8e0 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) from [<c0325a3c>] (start_kernel+0x2c4/0x2d0) [<c0325a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 20.07 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.17 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275720>] (panic+0xa0/0x1e8) [<c0275720>] (panic+0xa0/0x1e8) from [<c0326110>] (mount_block_root+0x294/0x298) [<c0326110>] (mount_block_root+0x294/0x298) from [<c03262c4>] (prepare_namespace+0x14c/0x184) [<c03262c4>] (prepare_namespace+0x14c/0x184) from [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0325d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c027147c>] (kernel_init+0x8/0x158) [<c027147c>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 18.04 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 69.03 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc5-137-g797afdf)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc5-137-g797afdf Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.9 sec omap3-beagle-xm PASS: 0 min 51.5 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.2 sec omap4-panda PASS: 1 min 4.1 sec omap4-panda-es PASS: 1 min 1.3 sec omap3-tobi,3730storm PASS: 0 min 24.1 sec omap3-beagle PASS: 1 min 21.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.1 sec tegra30-beaver PASS: 0 min 16.7 sec am335x-boneblack PASS: 0 min 39.5 sec omap3-beagle-xm PASS: 0 min 46.2 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 1.2 sec omap4-panda-es PASS: 0 min 59.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.8 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.6 sec omap3-tobi,3730storm PASS: 0 min 22.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 49.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

11 years, 7 months

1
0
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc5-126-g9219cec)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc5-126-g9219cec Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.6 sec omap3-beagle-xm PASS: 0 min 48.8 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.1 sec omap4-panda PASS: 1 min 5.2 sec omap4-panda-es PASS: 1 min 6.0 sec omap3-tobi,3730storm PASS: 0 min 20.8 sec omap3-beagle PASS: 0 min 52.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.2 sec tegra30-beaver PASS: 0 min 14.1 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 48.6 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 1.4 sec omap4-panda-es PASS: 1 min 1.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.5 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.8 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 54.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 7 months

1
0
0 0

queue boot: 26 pass, 1 fail (v3.11.6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.11.6 Failed boot tests (console logs at the end) =========================================== omap3-beagle: FAIL: omap2plus_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 53.0 sec am335x-bone PASS: 0 min 26.5 sec omap3-tobi,3530overo PASS: 0 min 21.5 sec omap4-panda PASS: 1 min 5.3 sec omap4-panda-es PASS: 1 min 8.2 sec omap3-tobi,3730storm PASS: 0 min 24.3 sec omap3-beagle FAIL: 1 min 47.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 15.5 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 15.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ tegra30-beaver PASS: 0 min 14.3 sec omap3-beagle-xm PASS: 0 min 48.8 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 4.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec omap3-tobi,3530overo PASS: 0 min 20.0 sec am335x-bone PASS: 0 min 33.7 sec omap4-panda-es PASS: 1 min 1.7 sec omap3-tobi,3730storm PASS: 0 min 19.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec omap3-beagle PASS: 0 min 55.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle: FAIL: last 24 lines of boot log: ---------------------------------------------- Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/3530beagle-h_GbIL/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ###############################################T T T T Abort OMAP3 beagleboard.org #tftp 0x80200000 tmp/3530beagle-h_GbIL/zImage tftp 0x80200000 tmp/3530beagle-h_GbIL/zImage EHCI timed out on TD - token=0x80008c80 EHCI timed out on TD - token=0x80008d80 ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() OMAP3 beagleboard.org # tftp 0x80200000 tmp/3530beagle-h_GbIL/zImage <INTERRUPT> OMAP3 beagleboard.org # tftp 0x80200000 tmp/3530beagle-h_GbIL/zImage EHCI timed out on TD - token=0x80008c80 EHCI timed out on TD - token=0x80008d80 ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() OMAP3 beagleboard.org # ~$off # PYBOOT: Exception: ERROR: Timeout loading tmp/3530beagle-h_GbIL/zImage. Giving up. # PYBOOT: Time: 107.33 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

arm-soc boot: 33 pass, 0 fail (v3.12-rc5-628-ge187a01)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.12-rc5-628-ge187a01 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.1 sec omap3-beagle-xm PASS: 0 min 52.4 sec am335x-bone PASS: 0 min 26.7 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec omap4-panda PASS: 1 min 4.9 sec omap4-panda-es PASS: 1 min 3.5 sec omap3-tobi,3730storm PASS: 0 min 20.2 sec omap3-beagle PASS: 0 min 51.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 20.1 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.0 sec tegra30-beaver PASS: 0 min 14.1 sec am335x-boneblack PASS: 0 min 34.8 sec omap3-beagle-xm PASS: 0 min 51.9 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 9.1 sec omap4-panda-es PASS: 1 min 10.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.5 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 19.8 sec am335x-bone PASS: 0 min 33.6 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 19.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 48.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 7 months

1
0
0 0

arm-soc boot: 33 pass, 0 fail (v3.12-rc4-623-g3edf397)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.12-rc4-623-g3edf397 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.1 sec omap3-beagle-xm PASS: 0 min 52.7 sec am335x-bone PASS: 0 min 26.7 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec omap4-panda PASS: 1 min 3.5 sec omap4-panda-es PASS: 1 min 0.4 sec omap3-tobi,3730storm PASS: 0 min 23.3 sec omap3-beagle PASS: 0 min 56.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 24.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.0 sec tegra30-beaver PASS: 0 min 16.4 sec am335x-boneblack PASS: 0 min 34.9 sec omap3-beagle-xm PASS: 0 min 52.5 sec armada-370-mirabox PASS: 0 min 20.7 sec omap4-panda PASS: 1 min 11.5 sec omap4-panda-es PASS: 1 min 6.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 20.1 sec am335x-bone PASS: 0 min 33.6 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.0 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 48.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec cat: v3.12-rc4-623-g3edf397-boot-report.log: No such file or directory msmtp: no recipients found Traceback (most recent call last): File "/home/khilman/bin/boot-report.py", line 191, in <module> subprocess.check_output('cat %s | msmtp --read-envelope-from -t --' %maillog, shell=True) File "/usr/lib/python2.7/subprocess.py", line 544, in check_output raise CalledProcessError(retcode, cmd, output=output) subprocess.CalledProcessError: Command 'cat v3.12-rc4-623-g3edf397-boot-report.log | msmtp --read-envelope-from -t --' returned non-zero exit status 64

11 years, 7 months

1
0
0 0

Re: .align may cause data to be interpreted as instructions

by Dave Martin

On Fri, Oct 18, 2013 at 03:36:38PM +0300, Taras Kondratiuk wrote: > On 10/18/2013 02:03 PM, Jon Medhurst (Tixy) wrote: > > On Thu, 2013-10-17 at 13:55 +0100, Dave Martin wrote: > >> On Thu, Oct 17, 2013 at 01:17:23PM +0100, Jon Medhurst (Tixy) wrote: > >>> I'll send a patch proposing that fix after I've worked out how to test > >>> it on a big-endian kernel. Or if someone else sends a patch for that > >>> with a good commit message that explains what's going on I'll happily > >>> ack that. > >> > >> Disassemble-testing may be enough -- but I advise to dump the relevant > >> code section with objdump -s as well as reading the code disassembly. > >> The hex dump does not lie, whereas the disassembler does sometimes get > >> confused in cases like this. > >> > >> Building and disassembling in BE8 and LE configurations will exercise > >> the two main cases (linker swabbing versus no swabbing) -- comparing > >> the dump of vmlinux with the dump of the .o file shows what the linker > >> is doing. > > > > Thanks, that's the clue I was missing. I was looking at objdumps of .o > > files and wasn't seeing any byte changes caused by this bug, just the > > disassembler treating data as code. Doing a dump of the final linked > > vmlinux I now see that exactly because the data is being treated as > > code, the linking is swapping the byte order of the data, (because ARM > > instructions are always little-endian and need to be fixed from their > > big-endian representation in the .o file?). > > > > In another branch of this thread, Taras said he had patches that were > > tested, so I'll wait for those rather than doing one myself. Taras > > should get the main credit for this investigation anyway :-) > > > > I've just sent patches to Ben. > > I was looking into gas code and found an opposite bug: > If NOP-padding is used to align data it can be treated as data > and saved in BE format. > So we definitely have to explicitly specify fill value for data > alignment in code section. I included that in my original report to the gas folks, so hopefully that should get fixed too. But specifying the padding value definitely seems the way to go here. Cheers ---Dave

11 years, 7 months

1
0
0 0

arm-soc boot: 33 pass, 0 fail (v3.12-rc4-621-g04cc381)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.12-rc4-621-g04cc381 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.1 sec omap3-beagle-xm PASS: 0 min 51.1 sec am335x-bone PASS: 0 min 26.8 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec omap4-panda PASS: 1 min 9.1 sec omap4-panda-es PASS: 1 min 3.6 sec omap3-tobi,3730storm PASS: 0 min 23.5 sec omap3-beagle PASS: 0 min 52.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.4 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.3 sec tegra30-beaver PASS: 0 min 16.4 sec am335x-boneblack PASS: 0 min 34.8 sec omap3-beagle-xm PASS: 0 min 49.9 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 20.6 sec omap4-panda-es PASS: 1 min 7.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 20.1 sec am335x-bone PASS: 0 min 33.7 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 54.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec cat: v3.12-rc4-621-g04cc381-boot-report.log: No such file or directory msmtp: no recipients found Traceback (most recent call last): File "/home/khilman/bin/boot-report.py", line 191, in <module> subprocess.check_output('cat %s | msmtp --read-envelope-from -t --' %maillog, shell=True) File "/usr/lib/python2.7/subprocess.py", line 544, in check_output raise CalledProcessError(retcode, cmd, output=output) subprocess.CalledProcessError: Command 'cat v3.12-rc4-621-g04cc381-boot-report.log | msmtp --read-envelope-from -t --' returned non-zero exit status 64

11 years, 7 months

1
0
0 0

[RFC PATCH] of/base: add helper of_property_read_u32_array_index

by zhangfei

Here is one question, is there any existing API could get nth array from arrays table? For example: tune-table = <26000000 1 1 3 3 13000000>, <360000000 6 3 3 1 50000000>, <0 0 0 0 0 0>, <0 0 0 0 0 0>, <26000000 1 1 3 3 13000000>, <360000000 6 3 3 1 50000000>, <0 0 0 0 0 0>, <720000000 6 4 8 4 100000000>; Can we get nth array with index? Like: u32 table[6]; ret = of_property_read_u32_array_index(np, "tune-table", table, 6, index); Thanks On 10/18/2013 09:45 PM, Zhangfei Gao wrote: > of_property_read_u32_array_index is added for read nth array values from u32 arrays > > Signed-off-by: Zhangfei Gao <zhangfei.gao(a)linaro.org> > --- > drivers/of/base.c | 35 +++++++++++++++++++++++++++++++++++ > include/linux/of.h | 12 ++++++++++++ > 2 files changed, 47 insertions(+) > > diff --git a/drivers/of/base.c b/drivers/of/base.c > index 865d3f6..5c5f877 100644 > --- a/drivers/of/base.c > +++ b/drivers/of/base.c > @@ -1002,6 +1002,41 @@ int of_property_read_u32_array(const struct device_node *np, > EXPORT_SYMBOL_GPL(of_property_read_u32_array); > > /** > + * of_property_read_u32_array_index - Find and read an array of 32 bit integers > + * pointed by index from a property. > + * > + * @np: device node from which the property value is to be read. > + * @propname: name of the property to be searched. > + * @out_values: pointer to return value, modified only if return value is 0. > + * @sz: number of array elements to read > + * @index: index of the u32 array in the list of values > + * > + * Search for a property in a device node and read nth 32-bit value(s) from > + * it. Returns 0 on success, -EINVAL if the property does not exist, > + * -ENODATA if property does not have a value, and -EOVERFLOW if the > + * property data isn't large enough. > + * > + * The out_values is modified only if a valid u32 value can be decoded. > + */ > +int of_property_read_u32_array_index(const struct device_node *np, > + const char *propname, u32 *out_values, > + size_t sz, u32 index) > +{ > + const __be32 *val = of_find_property_value_of_size(np, propname, > + (index + 1) * (sz * sizeof(*out_values))); > + > + if (IS_ERR(val)) > + return PTR_ERR(val); > + > + while (index--) > + val += sz; > + while (sz--) > + *out_values++ = be32_to_cpup(val++); > + return 0; > +} > +EXPORT_SYMBOL_GPL(of_property_read_u32_array_index); > + > +/** > * of_property_read_u64 - Find and read a 64 bit integer from a property > * @np: device node from which the property value is to be read. > * @propname: name of the property to be searched. > diff --git a/include/linux/of.h b/include/linux/of.h > index f95aee3..7103983 100644 > --- a/include/linux/of.h > +++ b/include/linux/of.h > @@ -246,6 +246,10 @@ extern int of_property_read_u32_array(const struct device_node *np, > const char *propname, > u32 *out_values, > size_t sz); > +extern int of_property_read_u32_array_index(const struct device_node *np, > + const char *propname, > + u32 *out_values, > + size_t sz, u32 index); > extern int of_property_read_u64(const struct device_node *np, > const char *propname, u64 *out_value); > > @@ -427,6 +431,14 @@ static inline int of_property_read_u32_array(const struct device_node *np, > return -ENOSYS; > } > > +static inline int of_property_read_u32_array_index(const struct device_node *np, > + const char *propname, > + u32 *out_values, > + size_t sz, u32 index) > +{ > + return -ENOSYS; > +} > + > static inline int of_property_read_string(struct device_node *np, > const char *propname, > const char **out_string) >

11 years, 7 months

1
0
0 0

[RFC][PATCH 0/7] Power-aware scheduling v2

by Morten Rasmussen

Hi, I have revised the previous power scheduler proposal[1] trying to address as many of the comments as possible. The overall idea was discussed at LPC[2,3]. The revised design has removed the power scheduler and replaced it with a high level power driver interface. An interface that allows the scheduler to query the power driver for information and provide hints to guide power management decisions in the power driver. The power driver is going to be a unified platform power driver that can replace cpufreq and cpuidle drivers. Generic power policies will be optional helper functions called from the power driver. Platforms may choose to implement their own policies as part of their power driver. This RFC series prototypes a part of the power driver interface (cpu capacity hints) and shows how they can be used from the scheduler. More extensive use of the power driver hints and queries is left for later. The focus for now is the power driver interface. The patch series includes a power driver/cpufreq governor that can use existing cpufreq drivers as backend. It has been tested (not thoroughly) on ARM TC2. The cpufreq governor power driver implementation is rather horrible, but it illustrates how the power driver interface can be used. Native power drivers is on the todo list. The power driver interface is still missing quite a few calls to handle: Idle, adding extra information to the sched_domain hierarchy to guide scheduling decisions (packing), and possibly scaling of tracked load to compensate for frequency changes and asymmetric systems (big.LITTLE). This set is based on 3.11. I have done ARM TC2 testing based on linux-linaro 2013.08[4] to get cpufreq support for TC2. Morten [1] https://lkml.org/lkml/2013/7/9/314 [2] http://etherpad.osuosl.org/lpc2013-power-efficient-scheduling [3] http://www.linuxplumbersconf.org/2013/ocw//system/presentations/1263/origin… [4] http://git.linaro.org/gitweb?p=kernel/linux-linaro-tracking.git Morten Rasmussen (7): Initial power driver interface infrastructure sched: power: Power driver late callback interface sched: power: go_faster/slower power driver hints sched: power: Remove power capacity hints for kworker threads sched: power: Increase cpu capacity based on rq tracked load sched: power: cpufreq: Initial schedpower cpufreq governor/power driver sched: power: Let the power driver choose the best wake-up cpu arch/arm/Kconfig | 4 + drivers/cpufreq/Kconfig | 11 ++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/cpufreq_schedpower.c | 218 ++++++++++++++++++++++++++++++++++ include/linux/sched/power.h | 37 ++++++ kernel/sched/Makefile | 1 + kernel/sched/core.c | 1 + kernel/sched/fair.c | 53 ++++++++- kernel/sched/power.c | 73 ++++++++++++ kernel/sched/sched.h | 32 +++++ 10 files changed, 430 insertions(+), 1 deletion(-) create mode 100644 drivers/cpufreq/cpufreq_schedpower.c create mode 100644 include/linux/sched/power.h create mode 100644 kernel/sched/power.c -- 1.7.9.5

11 years, 7 months

5
28
0 0

Re: .align may cause data to be interpreted as instructions

by Dave Martin

On Thu, Oct 17, 2013 at 01:17:23PM +0100, Jon Medhurst (Tixy) wrote: > On Wed, 2013-10-16 at 01:38 +0300, Taras Kondratiuk wrote: > > Hi > > > > I was debugging kprobes-test for BE8 and noticed that some data fields > > are stored in LE instead of BE. It happens because these data fields > > get interpreted as instructions. > > > > Is it a known issue? > > > > For example: > > test_align_fail_data: > > bx lr > > .byte 0xaa > > .align > > .word 0x12345678 > > > > I would expect to see something like this: > > 00000000 <test_align_fail_data>: > > 0: e12fff1e bx lr > > 4: aa .byte 0xaa > > 5: 00 .byte 0x00 > > 6: 0000 .short 0x0000 > > 8: 12345678 .word 0x12345678 > > > > But instead I have: > > 00000000 <test_align_fail_data>: > > 0: e12fff1e bx lr > > 4: aa .byte 0xaa > > 5: 00 .byte 0x00 > > 6: 0000 .short 0x0000 > > 8: 12345678 eorsne r5, r4, #120, 12 ; 0x7800000 > > > > As a result the word 0x12345678 will be stored in LE. > > > > I've run several tests and here are my observations: > > - Double ".align" fixes the issue :) > > - Behavior is the same for LE/BE, ARM/Thumb, GCC 4.4.1/4.6.x/4.8.2 > > - Size of alignment doesn't matter. > > - Issue happens only if previous data is not instruction-aligned and > > 0's are added before NOPs. > > - Explicit filling with 0's (.align , 0) fixes the issue, but as a side > > effect data @0x4 is interpreted as a single ".word 0xaa000000" > > instead of ".byte .byte .short". I'm not sure if there can be any > > functional difference because of this. > > After thinking about things overnight, I believe that this is the fix we > should go with. We want to stick alignment padding between data laid > down with .byte and .word so it makes sense to explicitly ask the > toolchain to pad with zeros rather than leaving it the opportunity to > get confused. (.align in the text section probably means it wants to > align with nops, but then sees the initial alignment and/or surrounding > statements look like binary data, not code, and then...) I believe this workaround will work. Looking at the gas code, if .align is given an explicit fill value, the special NOP-padding code in gas is bypassed, and padding works just the same as it would in a data section. Obviously, this only works in situations where the bytes emitted by .align are never executed by the CPU. > I'll send a patch proposing that fix after I've worked out how to test > it on a big-endian kernel. Or if someone else sends a patch for that > with a good commit message that explains what's going on I'll happily > ack that. Disassemble-testing may be enough -- but I advise to dump the relevant code section with objdump -s as well as reading the code disassembly. The hex dump does not lie, whereas the disassembler does sometimes get confused in cases like this. Building and disassembling in BE8 and LE configurations will exercise the two main cases (linker swabbing versus no swabbing) -- comparing the dump of vmlinux with the dump of the .o file shows what the linker is doing. Cheers ---Dave

11 years, 7 months

3
2
0 0

[RFC][PATCH v5 02/14] ARM: sched: clear SD_SHARE_POWERDOMAIN

by Vincent Guittot

The ARM platforms take advantage of packing tasks on few cores if the latters can be powergated independantly. We use DT and the cpu topology descirption to define at which level a core can be independantly powergated to the others and the SD_SHARE_POWERDOMAIN will be set accordingly at MC and CPU sched_domain level. The power-gate properties should be added with the value 1 in cpu and cluster node when then can power gate independantly from the other. As an example of a quad cores system which can power gate each core independantly, we should have a DT similar to the example below cpus { #address-cells = <1>; #size-cells = <0>; cpu-map { cluster0 { power-gate = <1>; core0 { cpu = <&cpu0>; power-gate = <1>; }; core1 { cpu = <&cpu1>; power-gate = <1>; }; core2 { cpu = <&cpu2>; power-gate = <1>; }; core3 { cpu = <&cpu3>; power-gate = <1>; }; }; }; ... }; Signed-off-by: Vincent Guittot <vincent.guittot(a)linaro.org> --- arch/arm/include/asm/topology.h | 4 ++++ arch/arm/kernel/topology.c | 50 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 53 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index 58b8b84..5102847 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -5,12 +5,16 @@ #include <linux/cpumask.h> +#define CPU_CORE_GATE 0x1 +#define CPU_CLUSTER_GATE 0x2 + struct cputopo_arm { int thread_id; int core_id; int socket_id; cpumask_t thread_sibling; cpumask_t core_sibling; + int flags; }; extern struct cputopo_arm cpu_topology[NR_CPUS]; diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 85a8737..f38f1f9 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -24,6 +24,7 @@ #include <asm/cputype.h> #include <asm/topology.h> +#include <asm/smp_plat.h> /* * cpu power scale management @@ -79,6 +80,51 @@ unsigned long *__cpu_capacity; unsigned long middle_capacity = 1; +static int __init get_dt_power_topology(struct device_node *topo) +{ + const u32 *reg; + int len, power = 0; + int flag = CPU_CORE_GATE; + + for (; topo; topo = of_get_next_parent(topo)) { + reg = of_get_property(topo, "power-gate", &len); + if (reg && len == 4 && be32_to_cpup(reg)) + power |= flag; + flag <<= 1; + } + + return power; +} + +#define for_each_subnode_with_property(dn, pn, prop_name) \ + for (dn = of_find_node_with_property(pn, prop_name); dn; \ + dn = of_find_node_with_property(dn, prop_name)) + +static void __init init_dt_power_topology(void) +{ + struct device_node *cn, *topo; + + /* Get power domain topology information */ + cn = of_find_node_by_path("/cpus/cpu-map"); + if (!cn) { + pr_warn("Missing cpu-map node, bailing out\n"); + return; + } + + for_each_subnode_with_property(topo, cn, "cpu") { + struct device_node *cpu; + + cpu = of_parse_phandle(topo, "cpu", 0); + if (cpu) { + u32 hwid; + + of_property_read_u32(cpu, "reg", &hwid); + cpu_topology[get_logical_index(hwid)].flags = get_dt_power_topology(topo); + + } + } +} + /* * Iterate all CPUs' descriptor in DT and compute the efficiency * (as per table_efficiency). Also calculate a middle efficiency @@ -151,6 +197,8 @@ static void __init parse_dt_topology(void) middle_capacity = ((max_capacity / 3) >> (SCHED_POWER_SHIFT-1)) + 1; + /* Retrieve power topology information from DT */ + init_dt_power_topology(); } /* @@ -283,7 +331,7 @@ void __init init_cpu_topology(void) cpu_topo->socket_id = -1; cpumask_clear(&cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); - + cpu_topo->flags = 0; set_power_scale(cpu, SCHED_POWER_SCALE); } smp_wmb(); -- 1.7.9.5

11 years, 7 months

1
0
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc5-123-g04919af)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc5-123-g04919af Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 30.3 sec omap3-beagle-xm PASS: 0 min 51.8 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.1 sec omap4-panda PASS: 1 min 4.8 sec omap4-panda-es PASS: 1 min 7.3 sec omap3-tobi,3730storm PASS: 0 min 23.4 sec omap3-beagle PASS: 0 min 51.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 35.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.1 sec tegra30-beaver PASS: 0 min 17.1 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 50.1 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 2.7 sec omap4-panda-es PASS: 0 min 59.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.9 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 20.2 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 54.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 7 months

1
0
0 0

[RFC PATCH 0/5] PSCI system off and reset for KVM ARM/ARM64

by Anup Patel

The Power State and Coordination Interface (PSCI) specification defines SYSTEM_OFF and SYSTEM_RESET functions for system poweroff and reboot. This patchset adds: 1. Emulation of PSCI SYSTEM_OFF and SYSTEM_RESET functions in KVM ARM/ARM64 by forwarding them to user space (QEMU or KVMTOOL) 2. System poweroff and reboot using PSCI for ARM/ARM64 kernel Anup Patel (5): ARM/ARM64: KVM: Update user space API header for PSCI emulation ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space KVM: Add documentation for KVM_EXIT_PSCI exit reason ARM: psci: Add support for system reboot and poweroff ARM64: psci: Add support for system reboot and poweroff Documentation/virtual/kvm/api.txt | 13 +++++++++ arch/arm/include/asm/kvm_psci.h | 25 +++++++++++++++- arch/arm/include/uapi/asm/kvm.h | 2 ++ arch/arm/kernel/psci.c | 36 +++++++++++++++++++++++ arch/arm/kvm/arm.c | 12 ++++++-- arch/arm/kvm/handle_exit.c | 12 ++++++-- arch/arm/kvm/psci.c | 57 ++++++++++++++++++++++++++++++++++--- arch/arm64/include/asm/kvm_psci.h | 25 +++++++++++++++- arch/arm64/include/uapi/asm/kvm.h | 2 ++ arch/arm64/kernel/psci.c | 36 +++++++++++++++++++++++ arch/arm64/kvm/handle_exit.c | 24 ++++++++++++---- include/uapi/linux/kvm.h | 7 +++++ 12 files changed, 233 insertions(+), 18 deletions(-) -- 1.7.9.5

11 years, 7 months

7
39
0 0

next-thierry boot: 27 pass, 6 fail (next-20131017)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next-thierry Git describe: next-20131017 Failed boot tests (console logs at the end) =========================================== imx6q-wandboard: FAIL: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 0 min 51.7 sec am335x-bone PASS: 0 min 31.8 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec omap4-panda PASS: 1 min 5.7 sec omap4-panda-es PASS: 1 min 5.2 sec omap3-tobi,3730storm PASS: 0 min 20.3 sec omap3-beagle PASS: 1 min 4.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard FAIL: 0 min 10.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 33.4 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 23.3 sec tegra30-beaver PASS: 0 min 17.1 sec am335x-boneblack PASS: 0 min 34.9 sec omap3-beagle-xm PASS: 0 min 48.2 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 2.4 sec omap4-panda-es PASS: 1 min 4.8 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 21.3 sec sun4i-a10-cubieboard PASS: 0 min 13.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 20.0 sec am335x-bone PASS: 0 min 33.7 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec omap3-beagle PASS: 0 min 53.3 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 19.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- r6:807ffdb8 r5:00000000 r4:8081fff0 r3:00000000 [<800120fc>] (show_stack+0x0/0x1c) from [<805dcbc0>] (dump_stack+0x84/0x9c) [<805dcb3c>] (dump_stack+0x0/0x9c) from [<8001435c>] (handle_IPI+0x134/0x180) r5:8080ab80 r4:00000000 [<80014228>] (handle_IPI+0x0/0x180) from [<80008668>] (gic_handle_irq+0x5c/0x64) r8:8084aaee r7:f4000100 r6:80803f40 r5:8080acd0 r4:f400010c r3:8000f58c [<8000860c>] (gic_handle_irq+0x0/0x64) from [<80012d00>] (__irq_svc+0x40/0x54) Exception stack(0x80803f40 to 0x80803f88) 3f40: 81fa2778 00000000 000009bc 8001de20 80802000 80802000 8080a908 805e6414 3f60: 8084aaee 8084aaee 80802000 80803f94 80803f98 80803f88 8000f58c 8000f590 3f80: 60000113 ffffffff r7:80803f74 r6:ffffffff r5:60000113 r4:8000f590 [<8000f558>] (arch_cpu_idle+0x0/0x44) from [<80060250>] (cpu_startup_entry+0x110/0x160) [<80060140>] (cpu_startup_entry+0x0/0x160) from [<805d719c>] (rest_init+0x68/0x80) r7:81f9f680 r3:00000000 [<805d7134>] (rest_init+0x0/0x80) from [<807b0b00>] (start_kernel+0x2d0/0x330) [<807b0830>] (start_kernel+0x0/0x330) from [<10008074>] (0x10008074) r7:8080ebb8 r6:807f2cfc r5:8080a8a8 r4:10c53c7d ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address ffffffff # PYBOOT: Time: 10.40 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04a6c04>] (kernel_init_freeable+0x138/0x1d8) from [<c03810d0>] (kernel_init+0x8/0x158) [<c03810d0>] (kernel_init+0x8/0x158) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: 05121008 05031004 e15c0003 8afffff8 (e59440f0) ---[ end trace 203bd907c847398c ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc5-next-20131017 #1 [<c0015844>] (unwind_backtrace+0x0/0xf4) from [<c00116c0>] (show_stack+0x10/0x14) [<c00116c0>] (show_stack+0x10/0x14) from [<c0385b40>] (dump_stack+0x80/0x90) [<c0385b40>] (dump_stack+0x80/0x90) from [<c0014130>] (handle_IPI+0x134/0x15c) [<c0014130>] (handle_IPI+0x134/0x15c) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) from [<c00121c0>] (__irq_svc+0x40/0x50) Exception stack(0xef077fa0 to 0xef077fe8) 7fa0: c0fa05f8 00000000 000008f0 000008f0 ef076000 c04d8458 c038c744 ef076000 7fc0: c04ff0ed 00000001 c04ff0ed ef076000 00000000 ef077fe8 c000f40c c0052474 7fe0: 60000113 ffffffff [<c00121c0>] (__irq_svc+0x40/0x50) from [<c0052474>] (cpu_startup_entry+0x10c/0x14c) [<c0052474>] (cpu_startup_entry+0x10c/0x14c) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 11014702 # PYBOOT: Time: 20.05 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 tmp/arndale-zyGoxU/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.171 Filename 'tmp/arndale-zyGoxU/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 32949 (80b5 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.171:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb0b4 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.38 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- [ 1.019500] [<c04ae4f4>] (kernel_init+0x8/0x158) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) [ 1.027954] Code: ebfffd0b e3500000 e589000c 0a000059 (e5903038) [ 1.034057] ---[ end trace 85dc55f280751189 ]--- [ 1.038696] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.038696] [ 1.047821] CPU1: stopping [ 1.050537] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc5-next-20131017 #1 [ 1.058990] [<c0014e34>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 1.067504] [<c0011810>] (show_stack+0x10/0x14) from [<c04b255c>] (dump_stack+0x84/0x94) [ 1.075592] [<c04b255c>] (dump_stack+0x84/0x94) from [<c00130f4>] (handle_IPI+0x138/0x160) [ 1.083862] [<c00130f4>] (handle_IPI+0x138/0x160) from [<c00087a8>] (gic_handle_irq+0x58/0x5c) [ 1.092468] [<c00087a8>] (gic_handle_irq+0x58/0x5c) from [<c0012340>] (__irq_svc+0x40/0x50) [ 1.100799] Exception stack(0xee89ff98 to 0xee89ffe0) [ 1.105834] ff80: c12db5f0 00000000 [ 1.114013] ffa0: 0000053e c0019c60 ee89e000 c06c6478 c04bc538 ee89e000 c0750c96 00000001 [ 1.122192] ffc0: c0750c96 ee89e000 00000000 ee89ffe0 c000f570 c000f574 60000113 ffffffff [ 1.130371] [<c0012340>] (__irq_svc+0x40/0x50) from [<c000f574>] (arch_cpu_idle+0x38/0x3c) [ 1.138641] [<c000f574>] (arch_cpu_idle+0x38/0x3c) from [<c0079adc>] (cpu_startup_entry+0x118/0x158) [ 1.147766] [<c0079adc>] (cpu_startup_entry+0x118/0x158) from [<000088e4>] (0x88e4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address fde00033 # PYBOOT: Time: 23.32 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [ 159.689030] [<c0645d70>] (kernel_init_freeable+0x13c/0x1dc) from [<c04ae4f4>] (kernel_init+0x8/0x158) [ 159.698279] [<c04ae4f4>] (kernel_init+0x8/0x158) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) [ 159.706742] Code: eaff2e33 e92d4038 e2505000 08bd8038 (e59530f0) [ 159.712864] ---[ end trace 6b597c9b29bc0bf4 ]--- [ 159.717527] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 159.717527] [ 159.726687] CPU1: stopping [ 159.729405] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc5-next-20131017 #1 [ 159.737877] [<c0014e34>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 159.746430] [<c0011810>] (show_stack+0x10/0x14) from [<c04b255c>] (dump_stack+0x84/0x94) [ 159.754545] [<c04b255c>] (dump_stack+0x84/0x94) from [<c00130f4>] (handle_IPI+0x138/0x160) [ 159.762834] [<c00130f4>] (handle_IPI+0x138/0x160) from [<c0008700>] (armada_370_xp_handle_irq+0xac/0xb0) [ 159.772341] [<c0008700>] (armada_370_xp_handle_irq+0xac/0xb0) from [<c0012340>] (__irq_svc+0x40/0x50) [ 159.781582] Exception stack(0xee877fa0 to 0xee877fe8) [ 159.786648] 7fa0: c12d65f0 00000000 000009ce 000009ce ee876000 c06c6478 c04bc538 ee876000 [ 159.794849] 7fc0: c0750c96 00000001 c0750c96 ee876000 c0709100 ee877fe8 c000f570 c0079adc [ 159.803046] 7fe0: 60000113 ffffffff [ 159.806552] [<c0012340>] (__irq_svc+0x40/0x50) from [<c0079adc>] (cpu_startup_entry+0x118/0x158) [ 159.815362] [<c0079adc>] (cpu_startup_entry+0x118/0x158) from [<000088e4>] (0x88e4) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address efe7c0ef # PYBOOT: Time: 21.31 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- [<c02b6fe0>] (__clk_lookup_subtree+0x18/0x68) from [<c02b7008>] (__clk_lookup_subtree+0x40/0x68) Code: 1afffffb e12fff1e e1a03000 eafffff8 (e4d03001) ---[ end trace a610b44b4df3a2a2 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.12.0-rc5-next-20131017 #1 [<c001547c>] (unwind_backtrace+0x0/0xf4) from [<c00118a8>] (show_stack+0x10/0x14) [<c00118a8>] (show_stack+0x10/0x14) from [<c03a7800>] (dump_stack+0x98/0xc4) [<c03a7800>] (dump_stack+0x98/0xc4) from [<c00138f4>] (handle_IPI+0x130/0x144) [<c00138f4>] (handle_IPI+0x130/0x144) from [<c0008578>] (gic_handle_irq+0x58/0x5c) [<c0008578>] (gic_handle_irq+0x58/0x5c) from [<c00123c0>] (__irq_svc+0x40/0x70) Exception stack(0xef07ff98 to 0xef07ffe0) ff80: ffffffed 00b08000 ffa0: c053ad6c 00000000 ef07e000 c053a428 c03adaa4 ef07e000 c0564067 00000001 ffc0: c0564067 ef07e000 00000000 ef07ffe0 c000f600 c000f5f8 60000113 ffffffff [<c00123c0>] (__irq_svc+0x40/0x70) from [<c000f5f8>] (arch_cpu_idle+0x2c/0x38) [<c000f5f8>] (arch_cpu_idle+0x2c/0x38) from [<c005257c>] (cpu_startup_entry+0x114/0x154) [<c005257c>] (cpu_startup_entry+0x114/0x154) from [<00008604>] (0x8604) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 000003e8 # PYBOOT: Time: 19.24 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

arm-soc boot: 32 pass, 1 fail (v3.12-rc4-563-g55b5fc1)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.12-rc4-563-g55b5fc1 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 26.7 sec omap3-tobi,3530overo PASS: 0 min 21.5 sec omap4-panda PASS: 1 min 12.5 sec omap4-panda-es PASS: 1 min 28.9 sec omap3-tobi,3730storm PASS: 0 min 23.2 sec omap3-beagle PASS: 0 min 51.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.1 sec tegra30-beaver PASS: 0 min 17.1 sec am335x-boneblack FAIL: 0 min 41.2 sec omap3-beagle-xm PASS: 0 min 50.4 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 4.3 sec omap4-panda-es PASS: 1 min 4.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 19.8 sec am335x-bone PASS: 0 min 33.6 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 55.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 dhcp Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC c8:a0:30:b4:18:a4 HOST MAC de:ad:be:af:00:00 RNDIS ready ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 41.22 seconds. # PYBOOT: Result: FAIL

11 years, 7 months

1
0
0 0

[PATCH 1/2] ASoC: dai: Provide interface for setting DMA data at probe time

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Allow DMA data to be set at probe time for devices that can do that, avoiding the need to do it every time we start a stream and supporting non-DT dmaengine users using the helpers. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- include/sound/soc-dai.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 1ce3685..800c101 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -286,6 +286,13 @@ static inline void snd_soc_dai_set_dma_data(struct snd_soc_dai *dai, dai->capture_dma_data = data; } +static inline void snd_soc_dai_init_dma_data(struct snd_soc_dai *dai, + void *playback, void *capture) +{ + dai->playback_dma_data = playback; + dai->capture_dma_data = capture; +} + static inline void snd_soc_dai_set_drvdata(struct snd_soc_dai *dai, void *data) { -- 1.8.4.rc3

11 years, 7 months

1
1
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc5-117-g83f11a9)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc5-117-g83f11a9 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 30.1 sec omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.1 sec omap4-panda PASS: 1 min 6.5 sec omap4-panda-es PASS: 1 min 4.7 sec omap3-tobi,3730storm PASS: 0 min 20.3 sec omap3-beagle PASS: 0 min 51.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.3 sec tegra30-beaver PASS: 0 min 17.4 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 50.2 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 12.0 sec omap4-panda-es PASS: 1 min 3.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.8 sec am335x-bone PASS: 0 min 33.3 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 50.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

11 years, 7 months

1
0
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc5-85-g630db0e)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc5-85-g630db0e Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 29.8 sec omap3-beagle-xm PASS: 0 min 51.8 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 24.2 sec omap4-panda PASS: 1 min 4.5 sec omap4-panda-es PASS: 1 min 5.7 sec omap3-tobi,3730storm PASS: 0 min 23.2 sec omap3-beagle PASS: 0 min 51.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.8 sec tegra30-beaver PASS: 0 min 17.1 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 51.7 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 1.6 sec omap4-panda-es PASS: 1 min 2.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.9 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.8 sec omap3-beagle PASS: 0 min 49.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 7 months

1
0
0 0

[PATCH] ASoC: wm8962: Move register initialisation to I2C probe()

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> This is more idiomatic and is required for robust operation since we must ensure that the clocking configuration is valid as rapidly as possible. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/wm8962.c | 150 +++++++++++++++++++++++----------------------- 1 file changed, 75 insertions(+), 75 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 54379ee..2bf9ee7 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3242,7 +3242,7 @@ static void wm8962_free_beep(struct snd_soc_codec *codec) } #endif -static void wm8962_set_gpio_mode(struct snd_soc_codec *codec, int gpio) +static void wm8962_set_gpio_mode(struct wm8962_priv *wm8962, int gpio) { int mask = 0; int val = 0; @@ -3263,8 +3263,8 @@ static void wm8962_set_gpio_mode(struct snd_soc_codec *codec, int gpio) } if (mask) - snd_soc_update_bits(codec, WM8962_ANALOGUE_CLOCKING1, - mask, val); + regmap_update_bits(wm8962->regmap, WM8962_ANALOGUE_CLOCKING1, + mask, val); } #ifdef CONFIG_GPIOLIB @@ -3276,7 +3276,6 @@ static inline struct wm8962_priv *gpio_to_wm8962(struct gpio_chip *chip) static int wm8962_gpio_request(struct gpio_chip *chip, unsigned offset) { struct wm8962_priv *wm8962 = gpio_to_wm8962(chip); - struct snd_soc_codec *codec = wm8962->codec; /* The WM8962 GPIOs aren't linearly numbered. For simplicity * we export linear numbers and error out if the unsupported @@ -3292,7 +3291,7 @@ static int wm8962_gpio_request(struct gpio_chip *chip, unsigned offset) return -EINVAL; } - wm8962_set_gpio_mode(codec, offset + 1); + wm8962_set_gpio_mode(wm8962, offset + 1); return 0; } @@ -3376,7 +3375,6 @@ static int wm8962_probe(struct snd_soc_codec *codec) { int ret; struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); - struct wm8962_pdata *pdata = &wm8962->pdata; int i; bool dmicclk, dmicdat; @@ -3409,75 +3407,6 @@ static int wm8962_probe(struct snd_soc_codec *codec) } } - /* SYSCLK defaults to on; make sure it is off so we can safely - * write to registers if the device is declocked. - */ - snd_soc_update_bits(codec, WM8962_CLOCKING2, WM8962_SYSCLK_ENA, 0); - - /* Ensure we have soft control over all registers */ - snd_soc_update_bits(codec, WM8962_CLOCKING2, - WM8962_CLKREG_OVD, WM8962_CLKREG_OVD); - - /* Ensure that the oscillator and PLLs are disabled */ - snd_soc_update_bits(codec, WM8962_PLL2, - WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA, - 0); - - /* Apply static configuration for GPIOs */ - for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) - if (pdata->gpio_init[i]) { - wm8962_set_gpio_mode(codec, i + 1); - snd_soc_write(codec, 0x200 + i, - pdata->gpio_init[i] & 0xffff); - } - - - /* Put the speakers into mono mode? */ - if (pdata->spk_mono) - snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2, - WM8962_SPK_MONO_MASK, WM8962_SPK_MONO); - - /* Micbias setup, detection enable and detection - * threasholds. */ - if (pdata->mic_cfg) - snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4, - WM8962_MICDET_ENA | - WM8962_MICDET_THR_MASK | - WM8962_MICSHORT_THR_MASK | - WM8962_MICBIAS_LVL, - pdata->mic_cfg); - - /* Latch volume update bits */ - snd_soc_update_bits(codec, WM8962_LEFT_INPUT_VOLUME, - WM8962_IN_VU, WM8962_IN_VU); - snd_soc_update_bits(codec, WM8962_RIGHT_INPUT_VOLUME, - WM8962_IN_VU, WM8962_IN_VU); - snd_soc_update_bits(codec, WM8962_LEFT_ADC_VOLUME, - WM8962_ADC_VU, WM8962_ADC_VU); - snd_soc_update_bits(codec, WM8962_RIGHT_ADC_VOLUME, - WM8962_ADC_VU, WM8962_ADC_VU); - snd_soc_update_bits(codec, WM8962_LEFT_DAC_VOLUME, - WM8962_DAC_VU, WM8962_DAC_VU); - snd_soc_update_bits(codec, WM8962_RIGHT_DAC_VOLUME, - WM8962_DAC_VU, WM8962_DAC_VU); - snd_soc_update_bits(codec, WM8962_SPKOUTL_VOLUME, - WM8962_SPKOUT_VU, WM8962_SPKOUT_VU); - snd_soc_update_bits(codec, WM8962_SPKOUTR_VOLUME, - WM8962_SPKOUT_VU, WM8962_SPKOUT_VU); - snd_soc_update_bits(codec, WM8962_HPOUTL_VOLUME, - WM8962_HPOUT_VU, WM8962_HPOUT_VU); - snd_soc_update_bits(codec, WM8962_HPOUTR_VOLUME, - WM8962_HPOUT_VU, WM8962_HPOUT_VU); - - /* Stereo control for EQ */ - snd_soc_update_bits(codec, WM8962_EQ1, WM8962_EQ_SHARED_COEFF, 0); - - /* Don't debouce interrupts so we don't need SYSCLK */ - snd_soc_update_bits(codec, WM8962_IRQ_DEBOUNCE, - WM8962_FLL_LOCK_DB | WM8962_PLL3_LOCK_DB | - WM8962_PLL2_LOCK_DB | WM8962_TEMP_SHUT_DB, - 0); - wm8962_add_widgets(codec); /* Save boards having to disable DMIC when not in use */ @@ -3671,6 +3600,77 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, goto err_enable; } + /* SYSCLK defaults to on; make sure it is off so we can safely + * write to registers if the device is declocked. + */ + regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2, + WM8962_SYSCLK_ENA, 0); + + /* Ensure we have soft control over all registers */ + regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2, + WM8962_CLKREG_OVD, WM8962_CLKREG_OVD); + + /* Ensure that the oscillator and PLLs are disabled */ + regmap_update_bits(wm8962->regmap, WM8962_PLL2, + WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA, + 0); + + /* Apply static configuration for GPIOs */ + for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) + if (pdata->gpio_init[i]) { + wm8962_set_gpio_mode(wm8962, i + 1); + regmap_write(wm8962->regmap, 0x200 + i, + pdata->gpio_init[i] & 0xffff); + } + + + /* Put the speakers into mono mode? */ + if (pdata->spk_mono) + regmap_update_bits(wm8962->regmap, WM8962_CLASS_D_CONTROL_2, + WM8962_SPK_MONO_MASK, WM8962_SPK_MONO); + + /* Micbias setup, detection enable and detection + * threasholds. */ + if (pdata->mic_cfg) + regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4, + WM8962_MICDET_ENA | + WM8962_MICDET_THR_MASK | + WM8962_MICSHORT_THR_MASK | + WM8962_MICBIAS_LVL, + pdata->mic_cfg); + + /* Latch volume update bits */ + regmap_update_bits(wm8962->regmap, WM8962_LEFT_INPUT_VOLUME, + WM8962_IN_VU, WM8962_IN_VU); + regmap_update_bits(wm8962->regmap, WM8962_RIGHT_INPUT_VOLUME, + WM8962_IN_VU, WM8962_IN_VU); + regmap_update_bits(wm8962->regmap, WM8962_LEFT_ADC_VOLUME, + WM8962_ADC_VU, WM8962_ADC_VU); + regmap_update_bits(wm8962->regmap, WM8962_RIGHT_ADC_VOLUME, + WM8962_ADC_VU, WM8962_ADC_VU); + regmap_update_bits(wm8962->regmap, WM8962_LEFT_DAC_VOLUME, + WM8962_DAC_VU, WM8962_DAC_VU); + regmap_update_bits(wm8962->regmap, WM8962_RIGHT_DAC_VOLUME, + WM8962_DAC_VU, WM8962_DAC_VU); + regmap_update_bits(wm8962->regmap, WM8962_SPKOUTL_VOLUME, + WM8962_SPKOUT_VU, WM8962_SPKOUT_VU); + regmap_update_bits(wm8962->regmap, WM8962_SPKOUTR_VOLUME, + WM8962_SPKOUT_VU, WM8962_SPKOUT_VU); + regmap_update_bits(wm8962->regmap, WM8962_HPOUTL_VOLUME, + WM8962_HPOUT_VU, WM8962_HPOUT_VU); + regmap_update_bits(wm8962->regmap, WM8962_HPOUTR_VOLUME, + WM8962_HPOUT_VU, WM8962_HPOUT_VU); + + /* Stereo control for EQ */ + regmap_update_bits(wm8962->regmap, WM8962_EQ1, + WM8962_EQ_SHARED_COEFF, 0); + + /* Don't debouce interrupts so we don't need SYSCLK */ + regmap_update_bits(wm8962->regmap, WM8962_IRQ_DEBOUNCE, + WM8962_FLL_LOCK_DB | WM8962_PLL3_LOCK_DB | + WM8962_PLL2_LOCK_DB | WM8962_TEMP_SHUT_DB, + 0); + if (wm8962->pdata.in4_dc_measure) { ret = regmap_register_patch(wm8962->regmap, wm8962_dc_measure, -- 1.8.4.rc3

11 years, 7 months

1
0
0 0

[PATCH] ASoC: wm8962: Move interrupt initalisation to probe()

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> This is more idiomatic and fixes bugs in the error handling paths. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/wm8962.c | 68 +++++++++++++++++++++++------------------------ 1 file changed, 33 insertions(+), 35 deletions(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 11d80f3..54379ee 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3377,7 +3377,7 @@ static int wm8962_probe(struct snd_soc_codec *codec) int ret; struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); struct wm8962_pdata *pdata = &wm8962->pdata; - int i, trigger, irq_pol; + int i; bool dmicclk, dmicdat; wm8962->codec = codec; @@ -3506,36 +3506,6 @@ static int wm8962_probe(struct snd_soc_codec *codec) wm8962_init_beep(codec); wm8962_init_gpio(codec); - if (wm8962->irq) { - if (pdata->irq_active_low) { - trigger = IRQF_TRIGGER_LOW; - irq_pol = WM8962_IRQ_POL; - } else { - trigger = IRQF_TRIGGER_HIGH; - irq_pol = 0; - } - - snd_soc_update_bits(codec, WM8962_INTERRUPT_CONTROL, - WM8962_IRQ_POL, irq_pol); - - ret = request_threaded_irq(wm8962->irq, NULL, wm8962_irq, - trigger | IRQF_ONESHOT, - "wm8962", codec->dev); - if (ret != 0) { - dev_err(codec->dev, "Failed to request IRQ %d: %d\n", - wm8962->irq, ret); - wm8962->irq = 0; - /* Non-fatal */ - } else { - /* Enable some IRQs by default */ - snd_soc_update_bits(codec, - WM8962_INTERRUPT_STATUS_2_MASK, - WM8962_FLL_LOCK_EINT | - WM8962_TEMP_SHUT_EINT | - WM8962_FIFOS_ERR_EINT, 0); - } - } - return 0; } @@ -3544,9 +3514,6 @@ static int wm8962_remove(struct snd_soc_codec *codec) struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); int i; - if (wm8962->irq) - free_irq(wm8962->irq, codec); - cancel_delayed_work_sync(&wm8962->mic_work); wm8962_free_gpio(codec); @@ -3619,7 +3586,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, struct wm8962_pdata *pdata = dev_get_platdata(&i2c->dev); struct wm8962_priv *wm8962; unsigned int reg; - int ret, i; + int ret, i, irq_pol, trigger; wm8962 = devm_kzalloc(&i2c->dev, sizeof(struct wm8962_priv), GFP_KERNEL); @@ -3714,6 +3681,37 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, ret); } + if (wm8962->irq) { + if (pdata->irq_active_low) { + trigger = IRQF_TRIGGER_LOW; + irq_pol = WM8962_IRQ_POL; + } else { + trigger = IRQF_TRIGGER_HIGH; + irq_pol = 0; + } + + regmap_update_bits(wm8962->regmap, WM8962_INTERRUPT_CONTROL, + WM8962_IRQ_POL, irq_pol); + + ret = devm_request_threaded_irq(&i2c->dev, wm8962->irq, NULL, + wm8962_irq, + trigger | IRQF_ONESHOT, + "wm8962", &i2c->dev); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n", + wm8962->irq, ret); + wm8962->irq = 0; + /* Non-fatal */ + } else { + /* Enable some IRQs by default */ + regmap_update_bits(wm8962->regmap, + WM8962_INTERRUPT_STATUS_2_MASK, + WM8962_FLL_LOCK_EINT | + WM8962_TEMP_SHUT_EINT | + WM8962_FIFOS_ERR_EINT, 0); + } + } + pm_runtime_enable(&i2c->dev); pm_request_idle(&i2c->dev); -- 1.8.4.rc3

11 years, 7 months

1
0
0 0

Re: .align may cause data to be interpreted as instructions

by Dave Martin

On Wed, Oct 16, 2013 at 10:17:14PM +0100, Måns Rullgård wrote: > Taras Kondratiuk <taras.kondratiuk(a)linaro.org> writes: > > > On 10/16/2013 10:25 PM, Dave Martin wrote: > >> Unfortunately, objdump can and does get confused about data/instruction > >> boundaries, so the output you see above may be misleading. > >> > >> Displaying the symbol table with --special-syms will list the magic > >> symbols that mark the instruction and data boundaries, to help debug > >> this kind of situation. > >> > >> > >> However, in this case, I think you've found a bug in the assembler, > >> as shown below. > >> > >> Before linking, the final $a symbol (indicating the start of ARM > >> instructions) is at address 8, so in this case objdump is correct > >> to show 0x12345678 as an instruction. > >> > >> After linking, the mapping symbols ($[atd]) remain as before, and > >> the linker has byteswapped this "instruction" (as it should). > >> > >> This is likely related to the magic for inserting the extensible > >> NOP-padding fragment which implements the .align in code sections. > >> That is code, and requires a $a mapping symbol, but that somehow > >> goes AWOL or gets displaced after the alignment padding ... > >> > >> I can't quite get my head around what is going on in > >> binutils/gas/config/tc-arm.c. We would need to understand that > >> before we can identify a reliable workaround. > > > > Thanks for confirming the issue. > > Does it makes sense to file a GCC bug? > > It seems like a binutils (gas) bug to me. It is indeed a gas bug (actually a few interrelated bugs). I've raised this with my local friendly binutils hackers, but I'll propagate it to the upstream bugzilla if it's slow to turn around a fix. In any case, we can't rely on this working for Linux for some time to come, because the fix would still need to make it into a binutils release, and then everyone would need to upgrade to that release. If we can work around it, we should just do that instead. Cheers ---Dave

11 years, 7 months

1
0
0 0

Re: [PATCH v2] ARM: cci driver need big endian fixes in asm code

by Dave Martin

On Tue, Oct 15, 2013 at 09:50:34PM -0700, Victor Kamensky wrote: > cci_enable_port_for_self written in asm and it works with h/w > registers that are in little endian format. When run in big > endian mode it needs byteswaped constants before/after it > writes/reads to/from such registers > > Signed-off-by: Victor Kamensky <victor.kamensky(a)linaro.org> > Signed-off-by: Ben Dooks <ben.dooks(a)codethink.co.uk> Acked-by: Dave Martin <Dave.Martin(a)arm.com> (With due thanks to linux/swab.h's compile-time constant swabbing skills, without which this wouldn't be possible...) > --- > drivers/bus/arm-cci.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c > index 57b0bc6..4328c25 100644 > --- a/drivers/bus/arm-cci.c > +++ b/drivers/bus/arm-cci.c > @@ -872,7 +872,7 @@ asmlinkage void __naked cci_enable_port_for_self(void) > > /* Enable the CCI port */ > " ldr r0, [r0, %[offsetof_port_phys]] \n" > -" mov r3, #"__stringify(CCI_ENABLE_REQ)" \n" > +" mov r3, %[cci_enable_req]\n" > " str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n" > > /* poll the status reg for completion */ > @@ -880,7 +880,7 @@ asmlinkage void __naked cci_enable_port_for_self(void) > " ldr r0, [r1] \n" > " ldr r0, [r0, r1] @ cci_ctrl_base \n" > "4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n" > -" tst r1, #1 \n" > +" tst r1, %[cci_control_status_bits] \n" > " bne 4b \n" > > " mov r0, #0 \n" > @@ -893,6 +893,8 @@ asmlinkage void __naked cci_enable_port_for_self(void) > "7: .word cci_ctrl_phys - . \n" > : : > [sizeof_cpu_port] "i" (sizeof(cpu_port)), > + [cci_enable_req] "i" cpu_to_le32(CCI_ENABLE_REQ), > + [cci_control_status_bits] "i" cpu_to_le32(1), > #ifndef __ARMEB__ > [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)), > #else > -- > 1.8.1.4 > > > _______________________________________________ > linaro-kernel mailing list > linaro-kernel(a)lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-kernel

11 years, 7 months

1
0
0 0

mainline boot: 33 pass, 0 fail (v3.12-rc5-78-g056cdce)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-rc5-78-g056cdce Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 30.3 sec omap3-beagle-xm PASS: 0 min 52.4 sec am335x-bone PASS: 0 min 26.1 sec omap3-tobi,3530overo PASS: 0 min 21.1 sec omap4-panda PASS: 1 min 4.4 sec omap4-panda-es PASS: 1 min 5.9 sec omap3-tobi,3730storm PASS: 0 min 25.1 sec omap3-beagle PASS: 0 min 56.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 18.5 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.4 sec tegra30-beaver PASS: 0 min 14.1 sec am335x-boneblack PASS: 0 min 34.4 sec omap3-beagle-xm PASS: 0 min 50.6 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 1.4 sec omap4-panda-es PASS: 1 min 2.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 19.5 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 19.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-beagle PASS: 0 min 51.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel