- linaro-kernel - lists.linaro.org

mainline boot: 35 pass, 1 fail (v3.14-rc3-209-g54dfffd)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3-209-g54dfffd Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 1 min 0.5 sec omap4-panda PASS: 1 min 5.2 sec am335x-bone PASS: 0 min 27.6 sec omap5-uevm PASS: 1 min 0.3 sec omap4-panda-es PASS: 1 min 12.4 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 43.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.3 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.6 sec sun4i-a10-cubieboard PASS: 0 min 17.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.9 sec tegra30-beaver PASS: 0 min 19.9 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 46.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda FAIL: 2 min 17.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.3 sec bcm28155-ap PASS: 1 min 4.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 31.1 sec omap5-uevm PASS: 1 min 46.8 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 55.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.0 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- [ 1.434112] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.441925] usbcore: registered new interface driver pegasus [ 1.447906] usbcore: registered new interface driver asix [ 1.453613] usbcore: registered new interface driver ax88179_178a [ 1.459991] usbcore: registered new interface driver cdc_ether [ 1.466156] usbcore: registered new interface driver r815x [ 1.471954] usbcore: registered new interface driver smsc75xx [ 1.478027] usbcore: registered new interface driver smsc95xx [ 1.484100] usbcore: registered new interface driver net1080 [ 1.490051] usbcore: registered new interface driver cdc_subset [ 1.496307] usbcore: registered new interface driver zaurus [ 1.502227] usbcore: registered new interface driver cdc_ncm [ 1.508148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.514984] ehci-pci: EHCI PCI platform driver [ 1.519683] ehci-platform: EHCI generic platform driver [ 1.525390] ehci-omap: OMAP-EHCI Host Controller driver [ 1.551208] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.556884] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.565246] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.590820] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.597869] hub 1-0:1.0: USB hub found [ 1.601837] hub 1-0:1.0: 3 ports detected [ 1.606597] ehci-orion: EHCI orion driver [ 1.611053] SPEAr-ehci: EHCI SPEAr driver [ 1.615417] tegra-ehci: Tegra EHCI driver [ 1.620422] usbcore: registered new interface driver usb-storage [ 1.628967] mousedev: PS/2 mouse device common for all mice [ 1.637451] i2c /dev entries driver [ 1.643951] sdhci: Secure Digital Host Controller Interface driver [ 1.650390] sdhci: Copyright(c) Pierre Ossman [ 1.655944] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.661865] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.669555] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.675476] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.683441] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.690643] usbcore: registered new interface driver usbhid [ 1.696472] usbhid: USB HID core driver [ 1.705139] TCP: cubic registered [ 1.708618] NET: Registered protocol family 17 [ 1.713531] Key type dns_resolver registered [ 1.718597] Power Management for TI OMAP4+ devices. [ 1.723754] Power Management for TI OMAP4. [ 1.728027] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.735137] Registering SWP/SWPB emulation handler [ 1.741424] vwl1271: 1800 mV [ 1.749206] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.759246] twl 0-0048: PIH (irq 39) nested IRQs [ 1.765960] twl_rtc rtc.10: Enabling TWL-RTC [ 1.772979] twl_rtc rtc.10: rtc core: registered rtc.10 as rtc0 [ 1.780059] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV [ 1.786224] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.792358] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.798492] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.804229] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.809722] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.815277] VDAC: 1800 mV [ 1.815277] VANA: 2100 mV [ 1.822204] VCXIO: 1800 mV [ 1.825683] VUSB: 3300 mV [ 1.829284] V1V8: 1800 mV [ 1.832916] V2V1: 2100 mV [ 1.920867] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.051177] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz [ 2.059173] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz [ 2.070190] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 2.077758] hub 1-1:1.0: USB hub found [ 2.082122] hub 1-1:1.0: 5 ports detected [ 2.087738] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 2.094787] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.103485] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.151885] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.215057] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.225708] mmc0: new high speed SD card at address f3c2 [ 2.231903] mmcblk0: mmc0:f3c2 SD02G 1.84 GiB [ 2.238464] mmcblk0: p1 p2 [ 40.014404] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 137.43 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

arm-soc boot: 36 pass, 1 fail (v3.14-rc3-369-gb4425cc)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-369-gb4425cc Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-overo-storm-tobi PASS: 0 min 22.5 sec omap3-beagle-xm PASS: 1 min 3.6 sec omap4-panda PASS: 1 min 15.1 sec omap3-overo-tobi PASS: 0 min 23.1 sec am335x-bone PASS: 0 min 27.7 sec am335x-boneblack PASS: 0 min 25.8 sec omap4-panda-es PASS: 1 min 11.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.0 sec sun4i-a10-cubieboard PASS: 0 min 17.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.1 sec tegra30-beaver PASS: 0 min 19.8 sec am335x-boneblack PASS: 0 min 23.7 sec omap3-beagle-xm PASS: 0 min 47.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 52.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 17.2 sec bcm28155-ap PASS: 1 min 4.0 sec omap3-overo-tobi PASS: 0 min 21.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec am335x-bone PASS: 0 min 31.2 sec omap3-overo-storm-tobi PASS: 0 min 21.5 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 56.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00369-gb4425cc #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c94f8>] lr : [<c02c6ba4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: eea97c10 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eea530d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa08 ee910e10 c00ffa78 c04e28e4 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 eea98168 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e28e4 00000086 ee83c030 de60: 00000000 c01c9d04 c01c9cec c0551dc8 ee90b210 c01c848c 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c870c 00000000 c0519090 c01c8674 c01c6b84 dea0: ee85a7dc ee85e1b4 c0519090 eea97c80 c05180c0 c01c7d34 c046c5a0 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d50 00000000 c04f7504 dee0: 00000006 c04e2914 c04f7504 c00088bc 0000006d 00000042 ef7fce00 c03bd7e0 df00: 00000000 ef7fce08 c0454540 00000000 0000005f c04ad38c 00000063 ee83df30 df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acdac 00000006 ef7fce26 00000006 df40: c0507b70 c04f7504 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0bbc df60: c04f0bb0 c04cec40 00000006 00000006 c04ce50c d45efc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a0940 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0948 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 97577ff9 dd7dfd3f [<c02c94f8>] (__clk_put) from [<c01ffa08>] (mv_platform_probe+0x2ac/0x414) [<c01ffa08>] (mv_platform_probe) from [<c01c9d04>] (platform_drv_probe+0x18/0x48) [<c01c9d04>] (platform_drv_probe) from [<c01c848c>] (really_probe+0x80/0x214) [<c01c848c>] (really_probe) from [<c01c870c>] (__driver_attach+0x98/0x9c) [<c01c870c>] (__driver_attach) from [<c01c6b84>] (bus_for_each_dev+0x60/0x94) [<c01c6b84>] (bus_for_each_dev) from [<c01c7d34>] (bus_add_driver+0x148/0x1f0) [<c01c7d34>] (bus_add_driver) from [<c01c8d50>] (driver_register+0x78/0xf8) [<c01c8d50>] (driver_register) from [<c04e2914>] (mv_init+0x30/0x50) [<c04e2914>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0948>] (kernel_init+0x8/0xf0) [<c03a0948>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace d927277f64113795 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00369-gb4425cc #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5140>] (dump_stack+0x80/0x90) [<c03a5140>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 000009a6 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055764 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055764>] (cpu_startup_entry+0xf4/0x134) [<c0055764>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.21 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

[PATCH] [RFC] Add AArch64 support for PCI

by Liviu Dudau

Hi, This patch adds support for PCI to AArch64. It is based on the patch posted here [1] that adds support for creating generic host bridge structure from device tree. With that in place, I was able to boot an FPGA platform that has PCIe host bridge support and use a PCIe network card. The API used is different from the one used by ARM architecture. There is no pci_common_init_dev() function and no hw_pci structure, as that is no longer needed. Once the last signature is added to the legal agreement, I will post the host bridge driver code that I am using. Meanwhile, here is an example of what the probe function looks like, posted as an example: static int myhostbridge_probe(struct platform_device *pdev) { int err; struct device_node *dev; struct pci_host_bridge *bridge; struct resource bus_range; struct myhostbridge_port *pp; LIST_HEAD(resources); dev = pdev->dev.of_node; if (!of_device_is_available(dev)) { pr_warn("%s: disabled\n", dev->full_name); return -ENODEV; } pp = kzalloc(sizeof(struct myhostbridge_port), GFP_KERNEL); if (!pp) return -ENOMEM; err = of_pci_parse_bus_range(dev, &bus_range); if (err) { bus_range.start = 0; bus_range.end = 255; bus_range.flags = IORESOURCE_BUS; } pci_add_resource(&resources, &bus_range); bridge = pci_host_bridge_of_init(&pdev->dev, 0, &myhostbridge_ops, pp, &resources); if (!bridge) { err = -EINVAL; goto bridge_init_fail; } err = myhostbridge_setup(bridge->bus); if (err) goto bridge_init_fail; /* * Add flags here, this is just an example */ pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0); pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC); bus_range.end = pci_scan_child_bus(bridge->bus); pci_bus_update_busn_res_end(bridge->bus, bus_range.end); pci_assign_unassigned_bus_resources(bridge->bus); pci_bus_add_devices(bridge->bus); return 0; bridge_init_fail: kfree(pp); pci_free_resource_list(&resources); return err; } Best regards, Liviu [1] http://marc.info/?l=linux-pci&m=139145254821334&w=2 Liviu Dudau (1): arm64: Add support for PCI arch/arm64/Kconfig | 17 +++++++ arch/arm64/include/asm/Kbuild | 1 + arch/arm64/include/asm/io.h | 4 ++ arch/arm64/include/asm/pci.h | 35 +++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/pci.c | 112 ++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 170 insertions(+) create mode 100644 arch/arm64/include/asm/pci.h create mode 100644 arch/arm64/kernel/pci.c -- 1.8.5.3

11 years, 3 months

9
26
0 0

arm-soc boot: 36 pass, 1 fail (v3.14-rc3-368-g19e6f14)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-368-g19e6f14 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-overo-storm-tobi PASS: 0 min 25.1 sec omap3-beagle-xm PASS: 0 min 58.6 sec omap4-panda PASS: 1 min 11.2 sec omap3-overo-tobi PASS: 0 min 22.9 sec am335x-bone PASS: 0 min 27.7 sec am335x-boneblack PASS: 0 min 25.8 sec omap4-panda-es PASS: 1 min 11.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.9 sec sun4i-a10-cubieboard PASS: 0 min 17.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.7 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.5 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.9 sec tegra30-beaver PASS: 0 min 19.2 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 48.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 53.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 18.8 sec bcm28155-ap PASS: 1 min 14.9 sec omap3-overo-tobi PASS: 0 min 21.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 26.0 sec omap3-overo-storm-tobi PASS: 0 min 20.9 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 55.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.0 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00368-g19e6f14 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c94f8>] lr : [<c02c6ba4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee9dcc10 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eea530d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa08 ee910e10 c00ffa78 c04e28e4 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee9dd168 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e28e4 00000086 ee83c030 de60: 00000000 c01c9d04 c01c9cec c0551dc8 ee90b210 c01c848c 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c870c 00000000 c0519090 c01c8674 c01c6b84 dea0: ee85a7dc ee85e1b4 c0519090 ee9dcc80 c05180c0 c01c7d34 c046c5a0 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d50 00000000 c04f7504 dee0: 00000006 c04e2914 c04f7504 c00088bc 0000006d 00000042 ef7fce00 c03bd7e0 df00: 00000000 ef7fce08 c0454540 00000000 00000060 c04ad39c 00000063 ee83df30 df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acdac 00000006 ef7fce26 00000006 df40: c0507b70 c04f7504 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0bbc df60: c04f0bb0 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 47affddf df80: fbff7bce 00000000 c03a0940 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0948 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fffb dd7dfd3f [<c02c94f8>] (__clk_put) from [<c01ffa08>] (mv_platform_probe+0x2ac/0x414) [<c01ffa08>] (mv_platform_probe) from [<c01c9d04>] (platform_drv_probe+0x18/0x48) [<c01c9d04>] (platform_drv_probe) from [<c01c848c>] (really_probe+0x80/0x214) [<c01c848c>] (really_probe) from [<c01c870c>] (__driver_attach+0x98/0x9c) [<c01c870c>] (__driver_attach) from [<c01c6b84>] (bus_for_each_dev+0x60/0x94) [<c01c6b84>] (bus_for_each_dev) from [<c01c7d34>] (bus_add_driver+0x148/0x1f0) [<c01c7d34>] (bus_add_driver) from [<c01c8d50>] (driver_register+0x78/0xf8) [<c01c8d50>] (driver_register) from [<c04e2914>] (mv_init+0x30/0x50) [<c04e2914>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0948>] (kernel_init+0x8/0xf0) [<c03a0948>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 8d6e603e773d0e5f ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00368-g19e6f14 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5140>] (dump_stack+0x80/0x90) [<c03a5140>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 000009a0 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055764 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055764>] (cpu_startup_entry+0xf4/0x134) [<c0055764>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.14 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

next boot: 2 pass, 37 fail (next-20140220)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140220 Failed boot tests (console logs at the end) =========================================== omap3-overo-storm-tobi: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap3-overo-tobi: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig am335x-boneblack: FAIL: omap2plus_defconfig omap5-uevm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig qcom-apq8074-dragonboard: FAIL: msm_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig omap3-overo-tobi: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-overo-storm-tobi: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-overo-storm-tobi FAIL: 0 min 28.7 sec omap3-beagle-xm FAIL: 0 min 56.7 sec omap4-panda FAIL: 0 min 59.1 sec omap3-overo-tobi FAIL: 0 min 27.8 sec am335x-bone FAIL: 0 min 30.0 sec am335x-boneblack FAIL: 0 min 28.0 sec omap5-uevm FAIL: 0 min 31.4 sec omap4-panda-es FAIL: 0 min 59.7 sec multi_lpae_defconfig -------------------- omap5-uevm FAIL: 0 min 57.0 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.5 sec tegra_defconfig --------------- tegra30-beaver FAIL: 1 min 41.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 22.8 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.5 sec imx6q-wandboard FAIL: 0 min 21.1 sec msm_defconfig ------------- qcom-apq8074-dragonboard FAIL: 18 min 34.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.7 sec sun4i-a10-cubieboard FAIL: 0 min 23.3 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 34.3 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.4 sec tegra30-beaver FAIL: 0 min 24.8 sec am335x-boneblack FAIL: 0 min 28.6 sec omap3-beagle-xm FAIL: 0 min 53.0 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.1 sec armada-370-mirabox FAIL: 0 min 29.2 sec omap4-panda FAIL: 1 min 1.3 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec sun4i-a10-cubieboard FAIL: 0 min 19.4 sec bcm28155-ap FAIL: 16 min 34.1 sec omap3-overo-tobi FAIL: 0 min 27.7 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.2 sec am335x-bone FAIL: 0 min 30.3 sec omap3-overo-storm-tobi FAIL: 0 min 26.0 sec omap5-uevm FAIL: 0 min 31.4 sec imx6q-wandboard FAIL: 0 min 20.8 sec omap4-panda-es FAIL: 0 min 56.0 sec imx6dl-wandboard,wand-dual FAIL: 0 min 22.1 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 31.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.195 Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730storm-qr51BV/zImage Overo # tftp ${loadaddr} 192.168.1.2:tmp/3730storm-qr51BV/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-qr51BV/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 2.4 MiB/s done Bytes transferred = 4299688 (419ba8 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 57128 (df28 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8fffff27 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.74 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730xm-zZOZIP/zImage OMAP3 beagleboard.org # tftp ${loadaddr} 192.168.1.2:tmp/3730xm-zZOZIP/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-zZOZIP/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 469.7 KiB/s done Bytes transferred = 4299688 (419ba8 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org #tftp 0x81f00000 192.168.1.2:tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 4.9 KiB/s done Bytes transferred = 57382 (e026 hex) OMAP3 beagleboard.org #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org #bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62025 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.66 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to addsetenv serverip 192.168.1.2 ress 192.168.1.152 Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4430panda-Zv0J_2/zImage Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-Zv0J_2/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-Zv0J_2/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 440.4 KiB/s done Bytes transferred = 4299688 (419ba8 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 76.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-Zv0J_2/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-Zv0J_2/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-Zv0J_2/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 8.8 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.14 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to addsetenv serverip 192.168.1.2 ress 192.168.1.155 Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3530overo-ol9l1V/zImage Overo # tftp ${loadaddr} 192.168.1.2:tmp/3530overo-ol9l1V/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-ol9l1V/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 2.4 MiB/s done Bytes transferred = 4299688 (419ba8 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo #tftp 0x81f00000 192.168.1.2:tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56720 (dd90 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff52000, end 8ff62d8f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.77 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to addressetenv serverip 192.168.1.2 s 192.168.1.198 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xbone-UBbhpp/zImage U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-UBbhpp/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-UBbhpp/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 1.2 MiB/s done Bytes transferred = 4299688 (419ba8 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-UBbhpp/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-UBbhpp/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-UBbhpp/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 28596 (6fb4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f09fb3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.01 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound tosetenv serverip 192.168.1.2 address 192.168.1.150 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xboneb-RmX0XG/zImage U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-RmX0XG/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-RmX0XG/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 1.2 MiB/s done Bytes transferred = 4299688 (419ba8 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 29192 (7208 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a207 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.02 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Connected. Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Connected. Disconnected. Reboot: omap5uevm ; phidget 1 2 : off, sleep, on found: 002/121 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to addressetenv serverip 192.168.1.2 s 192.168.1.157 Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4460panda-es-zKtpWn/zImage Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-zKtpWn/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-zKtpWn/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 469.7 KiB/s done Bytes transferred = 4299688 (419ba8 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 4.9 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.70 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/121 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.201 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/omap5uevm-UN6Kav/zImage U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-UN6Kav/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-UN6Kav/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################# 444.3 KiB/s done Bytes transferred = 4529440 (451d20 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 92.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-UN6Kav/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-UN6Kav/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-UN6Kav/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x8008d80 T ### 7.8 KiB/s done Bytes transferred = 43833 (ab39 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x451d20 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8db38 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.96 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-cOW7Nm/zImage sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-cOW7Nm/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-cOW7Nm/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.9 MiB/s done Bytes transferred = 4529440 (451d20 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i#tftp 0x41000000 192.168.1.2:tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 1.9 MiB/s done Bytes transferred = 12228 (2fc4 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x451d20 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefc3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.51 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ DHCP client bound tosetenv serverip 192.168.1.2 address 192.168.1.224 Tegra30 (Beaver) # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Tegra30 (Beaver) # if test -n ${netargs}; then run netargs; fitftp 0x81000000 192.168.1.2:tmp/beaver-6lFF8U/zImage Tegra30 (Beaver) # tftp 0x81000000 192.168.1.2:tmp/beaver-6lFF8U/zImage Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-6lFF8U/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################# 2.2 MiB/s done Bytes transferred = 4234552 (409d38 hex) Tegra30 (Beaver) # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *############################################ 2.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-6lFF8U/tegra30-beaver.dtb tftp 0x83000000 192.168.1.2:tmp/beaver-6lFF8U/tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-6lFF8U/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 1.9 MiB/s done Bytes transferred = 23852 (5d2c hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x409d38 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008d2b Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0-rc3-next-20140220 (build@brutus) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Wed Feb 19 23:40:04 PST 2014 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c0841580, node_mem_map ed7f0000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 101.92 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.156 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-dual-YinV9B/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-dual-YinV9B/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-YinV9B/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 1.5 MiB/s done Bytes transferred = 5186360 (4f2338 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) =>tftp 0x11000000 192.168.1.2:tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 24418 (5f62 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f61 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.77 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi =>if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound tosetenv serverip 192.168.1.2 address 192.168.1.164 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-solo-tFl8IG/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-solo-tFl8IG/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-tFl8IG/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 1.5 MiB/s done Bytes transferred = 5186360 (4f2338 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 24418 (5f62 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f61 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.54 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.163 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-quad-vFBpFR/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-quad-vFBpFR/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-vFBpFR/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 2.7 MiB/s done Bytes transferred = 5186360 (4f2338 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 2.2 MiB/s done Bytes transferred = 25787 (64bb hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4f2338 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 110094ba Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.12 seconds. # PYBOOT: Result: FAIL msm_defconfig ------------- qcom-apq8074-dragonboard: FAIL: last 80 lines of boot log: ---------------------------------------------------------- Reboot: dragon ; ip9258 2 3 : ['off'] < waiting for device > error: device not found Reboot: dragon-usb ; phidget 3 4 : off, sleep, on Reboot: dragon ; ip9258 2 3 : off, sleep, on < waiting for device > rebooting... finished. total time: 0.005s downloading 'boot.img'... OKAY [ 0.335s] booting... OKAY [ 0.010s] finished. total time: 0.346s <LAVA_DISPATCHER>2014-02-20 08:53:56 AM INFO: Attempting to connect to device using: /usr/bin/conmux-console vence/dragon Connected to dragon console [channel connected] (~$quit to exit) (user:khilman) is already connected <LAVA_DISPATCHER>2014-02-20 08:54:06 AM INFO: Matched <class 'pexpect.TIMEOUT'> which means all-good <LAVA_DISPATCHER>2014-02-20 08:56:36 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:57:06 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:57:36 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:58:07 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:58:37 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:59:07 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:59:37 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0xa07becc> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/dragon'] searcher: searcher_re: 0: re.compile("/ #") buffer (last 100 chars): nected to dragon console [channel connected] (~$quit to exit) (user:khilman) is already connected before (last 100 chars): nected to dragon console [channel connected] (~$quit to exit) (user:khilman) is already connected after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 27847 child_fd: 5 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0x97d65ec> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-02-20 08:59:37 AM CRITICAL: Could not get the test image booted properly <LAVA_DISPATCHER>2014-02-20 08:59:37 AM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 530, in boot_linaro_image raise CriticalError(msg) CriticalError: Could not get the test image booted properly <LAVA_DISPATCHER>2014-02-20 08:59:37 AM INFO: CriticalError <LAVA_DISPATCHER>2014-02-20 08:59:37 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: dragon-usb ; phidget 3 4 : ['off'] Reboot: dragon ; ip9258 2 3 : ['off'] <LAVA_DISPATCHER>2014-02-20 08:59:38 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-02-20 08:59:38 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/b02901674c9e240e54471c5bb693804c… LBOOT: Result: FAIL LBOOT: Time: 1114.64 seconds. sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.153 sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-s8CziE/zImage sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-s8CziE/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-s8CziE/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1777528 (1b1f78 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 1.9 MiB/s done Bytes transferred = 12228 (2fc4 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b1f78 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefc3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.68 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i#setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to adsetenv serverip 192.168.1.2 dress 192.168.1.160 sun4i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun4i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie-LyzMe2/zImage sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-LyzMe2/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-LyzMe2/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1777528 (1b1f78 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i#tftp 0x41000000 192.168.1.2:tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.1 MiB/s done Bytes transferred = 10881 (2a81 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b1f78 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa80 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 23.33 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 80 lines of boot log: ---------------------------------------------------- MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1, EXYNOS DWMMC: 2 In: serial Out: serial Err: serial Net: No ethernet found. (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 3 0 ARNDALE5250 # ARNDALE5250 # version version U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250 arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 ARNDALE5250 #setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ARNDALE5250 # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' ARNDALE5250 # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi ARNDALE5250 # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found ARNDALE5250 # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no ARNDALE5250 # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.167 ARNDALE5250 # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi ARNDALE5250 # if test -n ${netargs}; then run netargs; fitftp 0x40800000 192.168.1.2:tmp/arndale-HugbGD/zImage ARNDALE5250 # tftp 0x40800000 192.168.1.2:tmp/arndale-HugbGD/zImage Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-HugbGD/zImage'. Load address: 0x40800000 Loading: *################################################################# ################################################################# ########################################################### done Bytes transferred = 2772672 (2a4ec0 hex) ARNDALE5250 #tftp 0x407c0000 192.168.1.2:tmp/arndale-HugbGD/exynos5250-arndale.dtb tftp 0x407c0000 192.168.1.2:tmp/arndale-HugbGD/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-HugbGD/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33611 (834b hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb34a Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 34.27 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to addresetenv serverip 192.168.1.2 ss 192.168.1.159 U8500 $ setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U8500 $ if test -n ${netargs}; then run netargs; fitftp 0x00800000 192.168.1.2:tmp/snowball-WOjCYK/tmp5NcJTg-uImage U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-WOjCYK/tmp5NcJTg-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-WOjCYK/tmp5NcJTg-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## done Bytes transferred = 4540689 (454911 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4540625 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.41 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ setenv fdt_high 0xffffffff Tegra30 (Beaver) # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Tegra30 (Beaver) # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Tegra30 (Beaver) # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 DHCP client bound to addrsetenv serverip 192.168.1.2 ess 192.168.1.224 Tegra30 (Beaver) # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Tegra30 (Beaver) # if test -n ${netargs}; then run netargs; fitftp 0x81000000 192.168.1.2:tmp/beaver-8EwX5w/zImage Tegra30 (Beaver) # tftp 0x81000000 192.168.1.2:tmp/beaver-8EwX5w/zImage Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-8EwX5w/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.2 MiB/s done Bytes transferred = 4505112 (44be18 hex) Tegra30 (Beaver) # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *############################################ 2.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-8EwX5w/tegra30-beaver.dtb tftp 0x83000000 192.168.1.2:tmp/beaver-8EwX5w/tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-8EwX5w/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 2.1 MiB/s done Bytes transferred = 23852 (5d2c hex) Tegra30 (Beaver) #printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x44be18 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008d2b Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.76 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.150 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xboneb-WzmE0f/zImage U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-WzmE0f/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-WzmE0f/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.2 MiB/s done Bytes transferred = 4505112 (44be18 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot#tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 29192 (7208 hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a207 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.58 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org #dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730xm-5z1TtN/zImage OMAP3 beagleboard.org # tftp ${loadaddr} 192.168.1.2:tmp/3730xm-5z1TtN/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-5z1TtN/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 487.3 KiB/s done Bytes transferred = 4505112 (44be18 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 6.8 KiB/s done Bytes transferred = 57382 (e026 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org #bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62025 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 52.97 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.153 sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-B5trRd/zImage sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-B5trRd/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-B5trRd/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.7 MiB/s done Bytes transferred = 4505112 (44be18 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 1.9 MiB/s done Bytes transferred = 12228 (2fc4 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x44be18 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefc3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.08 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.183 Marvell>> setif test -n ${netargs}; then run netargs; fi env serverip if test -n ${netargs}; then run netargs; fi syntax error Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-VpFOTW/tmpQ57egv-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-VpFOTW/tmpQ57egv-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-VpFOTW/tmpQ57egv-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ done Bytes transferred = 4515934 (44e85e hex) Marvell>>tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>>printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>bootm 0x02000000 0x03000000 > bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-20 8:07:11 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4515870 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.22 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.152 Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4430panda-ZmzsNz/zImage Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-ZmzsNz/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-ZmzsNz/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 493.2 KiB/s done Bytes transferred = 4505112 (44be18 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 62.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-ZmzsNz/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-ZmzsNz/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-ZmzsNz/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 8.8 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 61.29 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Hit any key to stop autoboot: 1 0 openblocks> openblocks> version version U-Boot 2011.12 (Aug 26 2013 - 13:08:34) Plat'Home version: 2.0.7 (Marvell version: 2012_Q4.0p17) arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease) GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801 openblocks> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk openblocks> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi openblocks> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi openblocks> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no openblocks> dhcp dhcp BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.158 openblocks> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi openblocks> if test -n ${netargs}; then run netargs; fitftp 0x02000000 192.168.1.2:tmp/obsax3-Qu7_6C/tmprBSqi5-uImage openblocks> tftp 0x02000000 192.168.1.2:tmp/obsax3-Qu7_6C/tmprBSqi5-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'tmp/obsax3-Qu7_6C/tmprBSqi5-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ done Bytes transferred = 4520196 (44f904 hex) openblocks>tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) openblocks> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk openblocks>bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-20 8:10:26 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4520132 Bytes = 4.3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 31.61 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.160 sun4i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun4i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie-mIbGz5/zImage sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-mIbGz5/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-mIbGz5/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.7 MiB/s done Bytes transferred = 4505112 (44be18 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.1 MiB/s done Bytes transferred = 10881 (2a81 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x44be18 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa80 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.39 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- <LAVA_DISPATCHER>2014-02-20 08:19:24 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:19:55 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:20:25 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:20:55 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0x982202c> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/capri'] searcher: searcher_re: 0: re.compile("root@bcm-capri-board:~#") buffer (last 100 chars): 0x9e000000 Using Device Tree in place at 9e000000, end 9e004657 Starting kernel ... before (last 100 chars): 0x9e000000 Using Device Tree in place at 9e000000, end 9e004657 Starting kernel ... after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 31708 child_fd: 3 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0x914f60c> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-02-20 08:20:55 AM INFO: Booting the test image. Attempt: 2 < waiting for device > <LAVA_DISPATCHER>2014-02-20 08:20:57 AM INFO: Perform hard reset on the system Reboot: capri ; ip9258 1 3 : off, sleep, on < waiting for device > <LAVA_DISPATCHER>2014-02-20 08:30:59 AM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image self._boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image self.proc = self.target_device.power_on() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on self.fastboot('reboot') File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-02-20 08:30:59 AM INFO: CriticalError <LAVA_DISPATCHER>2014-02-20 08:30:59 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-02-20 08:31:00 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-02-20 08:31:00 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/04a66209783262ea115348ba280d8e03… LBOOT: Result: FAIL LBOOT: Time: 994.08 seconds. omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo #if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to setenv serverip 192.168.1.2 address 192.168.1.155 Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3530overo-rTxcee/zImage Overo # tftp ${loadaddr} 192.168.1.2:tmp/3530overo-rTxcee/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-rTxcee/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.5 MiB/s done Bytes transferred = 4505112 (44be18 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-rTxcee/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-rTxcee/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-rTxcee/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.4 MiB/s done Bytes transferred = 56720 (dd90 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff52000, end 8ff62d8f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.74 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi =>setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.164 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-solo-sIb1cw/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-solo-sIb1cw/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-sIb1cw/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.5 MiB/s done Bytes transferred = 4505112 (44be18 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 24418 (5f62 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f61 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.20 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.198 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xbone-MhDQtQ/zImage U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-MhDQtQ/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-MhDQtQ/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.1 MiB/s done Bytes transferred = 4505112 (44be18 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-MhDQtQ/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-MhDQtQ/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-MhDQtQ/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1 MiB/s done Bytes transferred = 28596 (6fb4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f09fb3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.30 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- No EEPROM on expansion board Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo #if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo #dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.195 Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730storm-rFlhnK/zImage Overo # tftp ${loadaddr} 192.168.1.2:tmp/3730storm-rFlhnK/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-rFlhnK/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.4 MiB/s done Bytes transferred = 4505112 (44be18 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 57128 (df28 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8fffff27 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.03 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : off, sleep, on found: 002/076 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to adsetenv serverip 192.168.1.2 dress 192.168.1.163 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-quad-AyV1wQ/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-quad-AyV1wQ/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-AyV1wQ/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.9 MiB/s done Bytes transferred = 4505112 (44be18 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 2.5 MiB/s done Bytes transferred = 25787 (64bb hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x44be18 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 110094ba Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.78 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to adsetenv serverip 192.168.1.2 dress 192.168.1.157 Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4460panda-es-WCoLqX/zImage Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-WCoLqX/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-WCoLqX/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 488.3 KiB/s done Bytes transferred = 4505112 (44be18 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 9.8 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.02 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 =>setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi =>setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no =>dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.156 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-dual-0zJAa6/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-dual-0zJAa6/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-0zJAa6/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.5 MiB/s done Bytes transferred = 4505112 (44be18 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.6 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.5 MiB/s done Bytes transferred = 24418 (5f62 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f61 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.05 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to addsetenv serverip 192.168.1.2 ress 192.168.1.159 U8500 $ setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U8500 $ if test -n ${netargs}; then run netargs; fitftp 0x00800000 192.168.1.2:tmp/snowball-HFdTnL/tmpqEazsF-uImage U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-HFdTnL/tmpqEazsF-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-HFdTnL/tmpqEazsF-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ###### done Bytes transferred = 2947457 (2cf981 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2947393 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

[PATCH 1/2] ASoC: alc5623: Convert to direct regmap API usage

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Convert to directly use the regmap API, allowing us to eliminate the last user of the ASoC level I/O implementations (there are still open coded I/O implementations in drivers), avoiding duplicating code in regmap. We no longer cache the entire CODEC register map on probe since the more advanced cache infrastructure in regmap is able to fill the cache on demand. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/alc5623.c | 87 ++++++++++++++++++++++++++-------------------- 1 file changed, 49 insertions(+), 38 deletions(-) diff --git a/sound/soc/codecs/alc5623.c b/sound/soc/codecs/alc5623.c index d303628..36cf7e8 100644 --- a/sound/soc/codecs/alc5623.c +++ b/sound/soc/codecs/alc5623.c @@ -21,6 +21,7 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/i2c.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <sound/core.h> #include <sound/pcm.h> @@ -38,26 +39,13 @@ MODULE_PARM_DESC(caps_charge, "ALC5623 cap charge time (msecs)"); /* codec private data */ struct alc5623_priv { - enum snd_soc_control_type control_type; + struct regmap *regmap; u8 id; unsigned int sysclk; - u16 reg_cache[ALC5623_VENDOR_ID2+2]; unsigned int add_ctrl; unsigned int jack_det_ctrl; }; -static void alc5623_fill_cache(struct snd_soc_codec *codec) -{ - int i, step = codec->driver->reg_cache_step; - u16 *cache = codec->reg_cache; - - /* not really efficient ... */ - codec->cache_bypass = 1; - for (i = 0 ; i < codec->driver->reg_cache_size ; i += step) - cache[i] = snd_soc_read(codec, i); - codec->cache_bypass = 0; -} - static inline int alc5623_reset(struct snd_soc_codec *codec) { return snd_soc_write(codec, ALC5623_RESET, 0); @@ -869,18 +857,28 @@ static struct snd_soc_dai_driver alc5623_dai = { static int alc5623_suspend(struct snd_soc_codec *codec) { + struct alc5623_priv *alc5623 = snd_soc_codec_get_drvdata(codec); + alc5623_set_bias_level(codec, SND_SOC_BIAS_OFF); + regcache_cache_only(alc5623->regmap, true); + return 0; } static int alc5623_resume(struct snd_soc_codec *codec) { - int i, step = codec->driver->reg_cache_step; - u16 *cache = codec->reg_cache; + struct alc5623_priv *alc5623 = snd_soc_codec_get_drvdata(codec); + int ret; /* Sync reg_cache with the hardware */ - for (i = 2 ; i < codec->driver->reg_cache_size ; i += step) - snd_soc_write(codec, i, cache[i]); + regcache_cache_only(alc5623->regmap, false); + ret = regcache_sync(alc5623->regmap); + if (ret != 0) { + dev_err(codec->dev, "Failed to sync register cache: %d\n", + ret); + regcache_cache_only(alc5623->regmap, true); + return ret; + } alc5623_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -900,14 +898,14 @@ static int alc5623_probe(struct snd_soc_codec *codec) struct snd_soc_dapm_context *dapm = &codec->dapm; int ret; - ret = snd_soc_codec_set_cache_io(codec, 8, 16, alc5623->control_type); + codec->control_data = alc5623->regmap; + ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP); if (ret < 0) { dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); return ret; } alc5623_reset(codec); - alc5623_fill_cache(codec); /* power on device */ alc5623_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -980,9 +978,15 @@ static struct snd_soc_codec_driver soc_codec_device_alc5623 = { .suspend = alc5623_suspend, .resume = alc5623_resume, .set_bias_level = alc5623_set_bias_level, - .reg_cache_size = ALC5623_VENDOR_ID2+2, - .reg_word_size = sizeof(u16), - .reg_cache_step = 2, +}; + +static const struct regmap_config alc5623_regmap = { + .reg_bits = 8, + .val_bits = 16, + .reg_stride = 2, + + .max_register = ALC5623_VENDOR_ID2, + .cache_type = REGCACHE_RBTREE, }; /* @@ -996,19 +1000,32 @@ static int alc5623_i2c_probe(struct i2c_client *client, { struct alc5623_platform_data *pdata; struct alc5623_priv *alc5623; - int ret, vid1, vid2; + unsigned int vid1, vid2; + int ret; - vid1 = i2c_smbus_read_word_data(client, ALC5623_VENDOR_ID1); - if (vid1 < 0) { - dev_err(&client->dev, "failed to read I2C\n"); - return -EIO; + alc5623 = devm_kzalloc(&client->dev, sizeof(struct alc5623_priv), + GFP_KERNEL); + if (alc5623 == NULL) + return -ENOMEM; + + alc5623->regmap = devm_regmap_init_i2c(client, &alc5623_regmap); + if (IS_ERR(alc5623->regmap)) { + ret = PTR_ERR(alc5623->regmap); + dev_err(&client->dev, "Failed to initialise I/O: %d\n", ret); + return ret; + } + + ret = regmap_read(alc5623->regmap, ALC5623_VENDOR_ID1, &vid1); + if (ret < 0) { + dev_err(&client->dev, "failed to read vendor ID1: %d\n", ret); + return ret; } vid1 = ((vid1 & 0xff) << 8) | (vid1 >> 8); - vid2 = i2c_smbus_read_byte_data(client, ALC5623_VENDOR_ID2); - if (vid2 < 0) { - dev_err(&client->dev, "failed to read I2C\n"); - return -EIO; + ret = regmap_read(alc5623->regmap, ALC5623_VENDOR_ID2, &vid2); + if (ret < 0) { + dev_err(&client->dev, "failed to read vendor ID2: %d\n", ret); + return ret; } if ((vid1 != 0x10ec) || (vid2 != id->driver_data)) { @@ -1021,11 +1038,6 @@ static int alc5623_i2c_probe(struct i2c_client *client, dev_dbg(&client->dev, "Found codec id : alc56%02x\n", vid2); - alc5623 = devm_kzalloc(&client->dev, sizeof(struct alc5623_priv), - GFP_KERNEL); - if (alc5623 == NULL) - return -ENOMEM; - pdata = client->dev.platform_data; if (pdata) { alc5623->add_ctrl = pdata->add_ctrl; @@ -1048,7 +1060,6 @@ static int alc5623_i2c_probe(struct i2c_client *client, } i2c_set_clientdata(client, alc5623); - alc5623->control_type = SND_SOC_I2C; ret = snd_soc_register_codec(&client->dev, &soc_codec_device_alc5623, &alc5623_dai, 1); -- 1.9.0.rc3

11 years, 3 months

1
1
0 0

mainline boot: 36 pass, 1 fail (v3.14-rc3-184-ge95003c)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3-184-ge95003c Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 1 min 0.5 sec omap4-panda PASS: 1 min 10.2 sec am335x-bone PASS: 0 min 27.6 sec omap5-uevm PASS: 1 min 0.1 sec omap4-panda-es PASS: 1 min 13.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 45.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec imx6q-wandboard PASS: 0 min 17.2 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 58.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.8 sec sun4i-a10-cubieboard PASS: 0 min 17.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.5 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.1 sec tegra30-beaver PASS: 0 min 19.9 sec am335x-boneblack PASS: 0 min 23.3 sec omap3-beagle-xm PASS: 0 min 55.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 52.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.2 sec bcm28155-ap PASS: 1 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 47.0 sec imx6q-wandboard PASS: 0 min 17.8 sec omap4-panda-es PASS: 0 min 51.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.0 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00184-ge95003c #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9538>] lr : [<c02c6be4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee396310 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eeadaed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa44 ee910e10 c00ffab8 c04e2864 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee941f78 de40: 00000086 ee90b210 c0519110 00000000 c0519110 c04e2864 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551e48 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519110 ee90b244 00000000 c01c874c 00000000 c0519110 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519110 ee396380 c0518140 c01c7d74 c046c560 c052ee80 dec0: c0519110 c0519110 00000006 c052ee80 c052ee80 c01c8d90 00000000 c04f7484 dee0: 00000006 c04e2894 c04f7484 c00088bc 00000086 ef7fce08 c0454500 00000000 df00: 00000000 c04ad318 00000063 ee83df20 c0035c6c c0035c90 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e60 c04acd58 00000006 ef7fce26 00000006 df40: c0507bf0 c04f7484 00000006 c052ee80 c052ee80 c04ce50c 00000086 c04f0b3c df60: c04f0b30 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 4faffddf df80: fbff7bde 00000000 c03a0a28 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0a30 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff3 dd7dfd2f [<c02c9538>] (__clk_put) from [<c01ffa44>] (mv_platform_probe+0x2ac/0x414) [<c01ffa44>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e2894>] (mv_init+0x30/0x50) [<c04e2894>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0a30>] (kernel_init+0x8/0xf0) [<c03a0a30>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 04372d7b54ffe8b3 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00184-ge95003c #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5228>] (dump_stack+0x80/0x90) [<c03a5228>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000946 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ed36 00000001 c052ed36 ee876000 00000000 ee877fe8 c000ee0c c00557a4 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c00557a4>] (cpu_startup_entry+0xf4/0x134) [<c00557a4>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.16 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

queue boot: 11 pass, 1 fail (v3.10.30-26-g8f740e7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.30-26-g8f740e7 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-bone PASS: 0 min 26.7 sec omap4-panda-es PASS: 1 min 7.4 sec omap3-beagle-xm PASS: 0 min 56.6 sec omap3-tobi PASS: 0 min 33.8 sec omap4-panda PASS: 1 min 7.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.7 sec imx6dl-wandboard,wand-solo FAIL: 0 min 32.0 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.4 sec armada-370-mirabox PASS: 0 min 19.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) CPU: Freescale i.MX6SOLO rev1.1 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 512 MiB WARNING: Caches not enabled MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default env 0 => ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.96 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

queue boot: 32 pass, 1 fail (v3.12.11-32-gefc99f1)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.11-32-gefc99f1 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.1 sec omap3-beagle-xm PASS: 0 min 56.4 sec omap4-panda PASS: 1 min 2.9 sec omap3-tobi PASS: 0 min 22.0 sec am335x-bone PASS: 0 min 26.9 sec omap4-panda-es PASS: 1 min 6.4 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec imx6q-wandboard PASS: 0 min 16.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.8 sec tegra30-beaver PASS: 0 min 22.6 sec am335x-boneblack PASS: 0 min 32.1 sec omap3-beagle-xm PASS: 0 min 58.3 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox PASS: 0 min 20.4 sec omap4-panda PASS: 1 min 5.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.6 sec bcm28155-ap PASS: 1 min 15.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.4 sec omap3-tobi PASS: 0 min 23.7 sec am335x-bone PASS: 0 min 33.8 sec imx6q-wandboard PASS: 0 min 16.3 sec omap4-panda-es PASS: 1 min 1.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox FAIL: 0 min 27.7 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>if test -n ${initenv}; then run initenv; fi > if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>>dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.183 Marvell>>if test -n ${netargs}; then run netargs; fi setenv serverip if test -n ${netargs}; then run netargs; fi syntax error Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-PjojnE/tmpdHthf0-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-PjojnE/tmpdHthf0-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-PjojnE/tmpdHthf0-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################### done Bytes transferred = 2653221 (287c25 hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-19 9:20:49 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2653157 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.68 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

arm-soc boot: 35 pass, 2 fail (v3.14-rc3-46-gfe73503)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-46-gfe73503 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-overo-storm-tobi PASS: 0 min 22.4 sec omap3-beagle-xm PASS: 1 min 2.3 sec omap4-panda PASS: 1 min 7.0 sec omap3-overo-tobi PASS: 0 min 23.6 sec am335x-bone PASS: 0 min 27.7 sec am335x-boneblack PASS: 0 min 25.9 sec omap4-panda-es PASS: 1 min 10.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec sun4i-a10-cubieboard PASS: 0 min 12.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 54.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.4 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.6 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 45.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 51.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard PASS: 0 min 19.0 sec bcm28155-ap PASS: 0 min 58.9 sec omap3-overo-tobi PASS: 0 min 24.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 26.0 sec omap3-overo-storm-tobi PASS: 0 min 24.1 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es FAIL: 2 min 15.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.2 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ [ 0.459472] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.459777] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.459930] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.460235] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.460388] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.323699] console [ttyO2] enabled [ 1.327667] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.333709] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.343994] STMicroelectronics ASC driver initialized [ 1.350311] serial: Freescale lpuart driver [ 1.354919] [drm] Initialized drm 1.1.0 20060810 [ 1.365814] loop: module loaded [ 1.375610] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.383453] usbcore: registered new interface driver pegasus [ 1.389465] usbcore: registered new interface driver asix [ 1.395202] usbcore: registered new interface driver ax88179_178a [ 1.401641] usbcore: registered new interface driver cdc_ether [ 1.407836] usbcore: registered new interface driver r815x [ 1.413665] usbcore: registered new interface driver CoreChips [ 1.419860] usbcore: registered new interface driver smsc75xx [ 1.425933] usbcore: registered new interface driver smsc95xx [ 1.432037] usbcore: registered new interface driver net1080 [ 1.438018] usbcore: registered new interface driver cdc_subset [ 1.444274] usbcore: registered new interface driver zaurus [ 1.450225] usbcore: registered new interface driver cdc_ncm [ 1.456176] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.463043] ehci-pci: EHCI PCI platform driver [ 1.467773] ehci-platform: EHCI generic platform driver [ 1.473480] ehci-omap: OMAP-EHCI Host Controller driver [ 1.499267] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.504974] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.513275] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.536651] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.543579] hub 1-0:1.0: USB hub found [ 1.547576] hub 1-0:1.0: 3 ports detected [ 1.552246] ehci-orion: EHCI orion driver [ 1.556701] SPEAr-ehci: EHCI SPEAr driver [ 1.561065] tegra-ehci: Tegra EHCI driver [ 1.565979] usbcore: registered new interface driver usb-storage [ 1.574249] mousedev: PS/2 mouse device common for all mice [ 1.582458] i2c /dev entries driver [ 1.588623] sdhci: Secure Digital Host Controller Interface driver [ 1.595123] sdhci: Copyright(c) Pierre Ossman [ 1.600494] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.606414] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.614074] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.619995] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.627929] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.635009] usbcore: registered new interface driver usbhid [ 1.640899] usbhid: USB HID core driver [ 1.648925] TCP: cubic registered [ 1.652404] NET: Registered protocol family 17 [ 1.657287] Key type dns_resolver registered [ 1.662261] Power Management for TI OMAP4+ devices. [ 1.667449] Power Management for TI OMAP4. [ 1.671752] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.678894] Registering SWP/SWPB emulation handler [ 1.684875] vwl1271: 1800 mV [ 1.692199] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.701446] twl 0-0048: PIH (irq 39) nested IRQs [ 1.707824] twl_rtc rtc.11: Enabling TWL-RTC [ 1.714630] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.721557] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.727600] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.733612] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.739624] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.745117] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.750488] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.755493] VDAC: 1800 mV [ 1.758850] VANA: 2100 mV [ 1.762664] VCXIO: 1800 mV [ 1.762664] VUSB: 3300 mV [ 1.769561] V1V8: 1800 mV [ 1.773101] V2V1: 2100 mV [ 1.780761] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 12.016784] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 135.70 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00046-gfe73503 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9538>] lr : [<c02c6be4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee39d290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa48 ee910e10 c00ffad0 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee251ca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551dc8 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c874c 00000000 c0519090 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519090 ee39d300 c05180c0 c01c7d74 c046c570 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d90 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c0454510 00000000 df00: 00000000 c04ad38c 00000063 ee83df20 c0035c2c c0035c50 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd7c 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 47affddf df80: fbff7bce 00000000 c03a0980 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0988 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff1 dd7dfd3b [<c02c9538>] (__clk_put) from [<c01ffa48>] (mv_platform_probe+0x2ac/0x414) [<c01ffa48>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0988>] (kernel_init+0x8/0xf0) [<c03a0988>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 051bf70501f8bc46 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00046-gfe73503 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5180>] (dump_stack+0x80/0x90) [<c03a5180>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000942 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.38 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

next boot: 37 pass, 0 fail (next-20140219)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140219 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 0 min 54.5 sec omap4-panda PASS: 1 min 4.8 sec omap3-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 27.4 sec omap5-uevm PASS: 1 min 3.8 sec omap4-panda-es PASS: 1 min 4.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 50.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.0 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 14.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.8 sec sun4i-a10-cubieboard PASS: 0 min 13.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 1 min 0.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.3 sec tegra30-beaver PASS: 0 min 22.8 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 43.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 56.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard PASS: 0 min 14.1 sec bcm28155-ap PASS: 1 min 7.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec omap3-tobi PASS: 0 min 21.6 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 48.3 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 53.0 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec

11 years, 3 months

1
0
0 0

queue boot: 34 pass, 1 fail (v3.13.3-40-g0b219cc)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.13.3-40-g0b219cc Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 0 min 54.7 sec omap4-panda PASS: 1 min 4.6 sec omap3-tobi PASS: 0 min 22.9 sec am335x-bone PASS: 0 min 27.6 sec omap4-panda-es PASS: 1 min 3.6 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.1 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.9 sec sun4i-a10-cubieboard PASS: 0 min 17.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.2 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack FAIL: 1 min 11.9 sec omap3-beagle-xm PASS: 0 min 55.6 sec sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 4.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 13.4 sec bcm28155-ap PASS: 1 min 15.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec omap3-tobi PASS: 0 min 20.8 sec am335x-bone PASS: 0 min 24.1 sec imx6q-wandboard PASS: 0 min 16.5 sec omap4-panda-es PASS: 1 min 4.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec Console logs for failures ========================= multi_v7_defconfig ------------------ am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC c8:a0:30:b4:18:a4 HOST MAC de:ad:be:af:00:00 RNDIS ready ERROR: The remote end did not respond in time. at ether.c:2395/usb_eth_init() link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 ~$off # PYBOOT: Exception: Timeout exceeded in read_nonblocking(). <pexpect.spawn object at 0x2a12390> version: 2.3 ($Revision: 399 $) command: /usr/bin/conmux-console args: ['/usr/bin/conmux-console', 'vence/am335xboneb'] searcher: searcher_re: 0: re.compile("U-Boot#") buffer (last 100 chars): BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 before (last 100 chars): BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 23123 child_fd: 3 closed: False timeout: 30 delimiter: <class 'pexpect.EOF'> logfile: <open file 'boot-am335x-boneblack.log', mode 'w' at 0x7f61a6ef7c90> logfile_read: None logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 # PYBOOT: Time: 71.87 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

[PATCH v10 0/6] arm64: KGDB Support

by vijay.kilari＠gmail.com

From: Vijaya Kumar K <Vijaya.Kumar(a)caviumnetworks.com> KGDB debugging support is added for EL1 debug in AArch64 mode. In first patch, PSTATE.D is set correctly In second patch,register layout is updated to be inline with GDB tool. Basic GDB connection, break point set/clear and info commands are supported except step/next debugging With second patch, step/next debugging support is added, where in pc is updated to point to the instruction to be stepped and stopped. With third patch, the compile time breakpoint instruction reordering is fixed by making kgbd_breakpoint() as noinline Tested with ARM64 simulator v10: - Rebased on 3.14-rc3+ kernel and tested. boot tests passed v9: - minor code movement comments fix v8: - fixed comments on local_dbg_{save,restore} macros - instruction_pointer() macro to return unsigned long to fix compilation warnings v7: - Changes made to set PSTATE.D properly - Performed KGDB boot tests - Fixed compilation warnings in driver/misc/kgbdts.c Results: kgdb boot test [32927.237895] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [32927.266066] kgdb: Registered I/O driver kgdbts. [32927.266419] kgdb: Waiting for connection from remote gdb... [32927.268598] kgdbts:RUN plant and detach test [32927.270683] kgdbts:RUN sw breakpoint test [32927.287659] kgdbts:RUN bad memory access test [32927.290322] kgdbts:RUN singlestep test 1000 iterations [32927.330342] kgdbts:RUN singlestep [0/1000] [32931.286356] kgdbts:RUN singlestep [100/1000] [32935.242536] kgdbts:RUN singlestep [200/1000] [32939.205392] kgdbts:RUN singlestep [300/1000] [32943.169522] kgdbts:RUN singlestep [400/1000] [32947.231868] kgdbts:RUN singlestep [500/1000] [32951.188008] kgdbts:RUN singlestep [600/1000] [32955.332243] kgdbts:RUN singlestep [700/1000] [32959.467109] kgdbts:RUN singlestep [800/1000] [32963.430888] kgdbts:RUN singlestep [900/1000] [32967.346992] kgdbts:RUN do_fork for 100 breakpoints kgdb test from sysfs: ~ # echo V1F1000 > /sys/module/kgdbts/parameters/kgdbts [33231.554237] kgdb: Registered I/O driver kgdbts. [33231.554677] kgdbts:RUN plant and detach test [33231.557072] kgdbts:RUN sw breakpoint test [33231.576980] kgdbts:RUN bad memory access test [33231.580022] kgdbts:RUN singlestep test 1000 iterations [33231.627056] kgdbts:RUN singlestep [0/1000] [33235.954027] kgdbts:RUN singlestep [100/1000] [33240.429086] kgdbts:RUN singlestep [200/1000] [33244.687118] kgdbts:RUN singlestep [300/1000] [33248.945191] kgdbts:RUN singlestep [400/1000] [33253.203751] kgdbts:RUN singlestep [500/1000] [33257.462019] kgdbts:RUN singlestep [600/1000] [33261.817809] kgdbts:RUN singlestep [700/1000] [33266.081268] kgdbts:RUN singlestep [800/1000] [33270.339813] kgdbts:RUN singlestep [900/1000] [33274.712404] kgdbts:RUN do_fork for 1000 breakpoints ~ # v6: - Change pstate register to 8 bytes to make endian nuetral. Use GDB below GDB patch to display pstate in Big endian mode. https://sourceware.org/ml/gdb-patches/2013-12/msg00720.html Thanks to Andrew. v5: - Updated BRK #imm16 value to 0x400 & 0x401 as per recommendation as per Marcus recommendataion http://patchwork.ozlabs.org/patch/290801/ - Rebased to 3.13 AArch64 kernel v4: - Updated kgdb_single_step and kgdb_cpu_doing_single_step variables properly based on gdb state v3: - Rebased to v4 version of Sandeepa Prabhu's patch (patch 1) - Made dynamic break point instruction encoding generic - Made ESR value encoding generic for dynamic and compile break point - Used memcpy and memset to copy register contents to gdb buffer - Fixed reordering of break point instruction by compiler with patch 3 - Rebased against AAach64 upstream kernel v2: - Moved break instruction encoding to debug-monitors.h file - Fixed endianess of compile break instruction encoding - Updated I/O buffer sizes - Updated register buffer size - Remove changes to debug_exception handler in entry.S for - ELR update and step debugging with update pc instead of ELR - Rebased against AArch64 upstream kernel v1: - Initial patch-set arm64: Add macros to manage processor debug state arm64: KGDB: Add Basic KGDB support arm64: KGDB: Add step debugging support KGDB: make kgdb_breakpoint() as noinline misc: debug: remove compilation warnings arm64: KGDB: Add KGDB config arch/arm64/Kconfig | 1 + arch/arm64/include/asm/debug-monitors.h | 64 ++++-- arch/arm64/include/asm/irqflags.h | 23 +++ arch/arm64/include/asm/kgdb.h | 84 ++++++++ arch/arm64/include/asm/ptrace.h | 2 +- arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/debug-monitors.c | 1 + arch/arm64/kernel/kgdb.c | 336 +++++++++++++++++++++++++++++++ kernel/debug/debug_core.c | 2 +- 9 files changed, 495 insertions(+), 19 deletions(-) create mode 100644 arch/arm64/include/asm/kgdb.h create mode 100644 arch/arm64/kernel/kgdb.c -- 1.7.9.5

11 years, 3 months

1
6
0 0

mainline boot: 36 pass, 1 fail (v3.14-rc3-168-g960dfc4)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3-168-g960dfc4 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 1.3 sec omap4-panda PASS: 1 min 17.4 sec am335x-bone PASS: 0 min 27.8 sec omap5-uevm PASS: 0 min 57.5 sec omap4-panda-es PASS: 1 min 10.1 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 43.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.2 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 59.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec sun4i-a10-cubieboard PASS: 0 min 17.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.4 sec tegra30-beaver PASS: 0 min 21.9 sec am335x-boneblack PASS: 0 min 23.5 sec omap3-beagle-xm PASS: 0 min 53.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 55.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 17.2 sec bcm28155-ap PASS: 1 min 9.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 50.7 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 51.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00168-g960dfc4 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9538>] lr : [<c02c6be4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee396310 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eeb2aed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa44 ee910e10 c00ffab8 c04e2864 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 eeb46f78 de40: 00000086 ee90b210 c0519110 00000000 c0519110 c04e2864 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551e48 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519110 ee90b244 00000000 c01c874c 00000000 c0519110 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519110 ee396380 c0518140 c01c7d74 c046c560 c052ee80 dec0: c0519110 c0519110 00000006 c052ee80 c052ee80 c01c8d90 00000000 c04f7484 dee0: 00000006 c04e2894 c04f7484 c00088bc 00000086 ef7fce08 c0454500 00000000 df00: 00000000 c04ad378 00000063 ee83df20 c0035c6c c0169fb0 20000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e60 c04acd58 00000006 ef7fce26 00000006 df40: c0507bf0 c04f7484 00000006 c052ee80 c052ee80 c04ce50c 00000086 c04f0b3c df60: c04f0b30 c04cec40 00000006 00000006 c04ce50c d456f45d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a0a28 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0a30 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd3f [<c02c9538>] (__clk_put) from [<c01ffa44>] (mv_platform_probe+0x2ac/0x414) [<c01ffa44>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e2894>] (mv_init+0x30/0x50) [<c04e2894>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0a30>] (kernel_init+0x8/0xf0) [<c03a0a30>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 70afc952f166884a ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00168-g960dfc4 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5228>] (dump_stack+0x80/0x90) [<c03a5228>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000940 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ed36 00000001 c052ed36 ee876000 00000000 ee877fe8 c000ee0c c00557a4 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c00557a4>] (cpu_startup_entry+0xf4/0x134) [<c00557a4>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.18 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

arm-soc boot: 34 pass, 3 fail (v3.14-rc3-30-ge0c7384)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-30-ge0c7384 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig sama5d35ek: FAIL: sama5_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-overo-storm-tobi PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 0 min 58.3 sec omap4-panda PASS: 1 min 12.3 sec omap3-overo-tobi PASS: 0 min 26.4 sec am335x-bone PASS: 0 min 27.3 sec am335x-boneblack FAIL: 1 min 12.0 sec omap4-panda-es PASS: 1 min 9.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.9 sec sun4i-a10-cubieboard PASS: 0 min 17.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 18.3 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 46.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 59.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.7 sec sun4i-a10-cubieboard PASS: 0 min 19.0 sec bcm28155-ap PASS: 1 min 9.9 sec omap3-overo-tobi PASS: 0 min 21.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.2 sec omap3-overo-storm-tobi PASS: 0 min 24.0 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 59.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.2 sec sama5_defconfig --------------- sama5d35ek FAIL: 1 min 38.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC c8:a0:30:b4:18:a4 HOST MAC de:ad:be:af:00:00 RNDIS ready ERROR: The remote end did not respond in time. at ether.c:2395/usb_eth_init() link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 ~$off # PYBOOT: Exception: Timeout exceeded in read_nonblocking(). <pexpect.spawn object at 0x174d3d0> version: 2.3 ($Revision: 399 $) command: /usr/bin/conmux-console args: ['/usr/bin/conmux-console', 'vence/am335xboneb'] searcher: searcher_re: 0: re.compile("U-Boot#") buffer (last 100 chars): BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 before (last 100 chars): BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 19027 child_fd: 3 closed: False timeout: 30 delimiter: <class 'pexpect.EOF'> logfile: <open file 'boot-am335x-boneblack.log', mode 'w' at 0x7f001b3b8c90> logfile_read: None logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 # PYBOOT: Time: 71.98 seconds. # PYBOOT: Result: FAIL sama5_defconfig --------------- sama5d35ek: FAIL: last 80 lines of boot log: -------------------------------------------- CPU: AT91SAMA5D35 Crystal frequency: 12 MHz CPU clock : 528 MHz Master clock : 132 MHz DRAM: 512 MiB WARNING: Caches not enabled NAND: ONFI params, minimum required ECC: 4 256 MiB MMC: mci: 0 In: serial Out: serial Err: serial Net: macb0, gmacb0 Warning: failed to set MAC address Hit any key to stop autoboot: 1 0 U-Boot> U-Boot> version version U-Boot 2012.10-00338-gb1c4a87 (Dec 21 2012 - 14:11:23) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.6.1-9ubuntu3) 4.6.1 GNU ld (GNU Binutils for Ubuntu) 2.21.53.20110810 U-Boot>setenv bootargs console=ttyS0,115200 setenv bootargs console=ttyS0,115200 U-Boot>setenv ethaddr F6:88:82:97:B6:E5 setenv ethaddr F6:88:82:97:B6:E5 Can't overwrite "ethaddr" U-Boot> setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot> dhcp dhcp macb0: PHY present at 0 macb0: link up, 100Mbps full-duplex (lpa: 0x45e1) BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.166 U-Boot> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot> if test -n ${netargs}; then run netargs; fitftp 0x22000000 192.168.1.2:tmp/sama5-hqwNxa/tmp_xoeMN-uImage U-Boot> tftp 0x22000000 192.168.1.2:tmp/sama5-hqwNxa/tmp_xoeMN-uImage macb0: PHY present at 0 macb0: link up, 100Mbps full-duplex (lpa: 0x45e1) Using macb0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.166 Filename 'tmp/sama5-hqwNxa/tmp_xoeMN-uImage'. Load address: 0x22000000 Loading: *###T T T T T tftp 0x22000000 192.168.1.2:tmp/sama5-hqwNxa/tmp_xoeMN-uImage T Abort U-Boot> tftp 0x22000000 192.168.1.2:tmp/sama5-hqwNxa/tmp_xoeMN-uImage macb0: PHY present at 0 macb0: link up, 100Mbps full-duplex (lpa: 0x45e1) Using macb0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.166 Filename 'tmp/sama5-hqwNxa/tmp_xoeMN-uImage'. Load address: 0x22000000 Loading: *T T T T T tftp 0x22000000 192.168.1.2:tmp/sama5-hqwNxa/tmp_xoeMN-uImage T Abort U-Boot> tftp 0x22000000 192.168.1.2:tmp/sama5-hqwNxa/tmp_xoeMN-uImage macb0: PHY present at 0 macb0: link up, 100Mbps full-duplex (lpa: 0x45e1) Using macb0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.166 Filename 'tmp/sama5-hqwNxa/tmp_xoeMN-uImage'. Load address: 0x22000000 Loading: *T T T T T T ~$off # PYBOOT: Exception: ERROR: Timeout loading 192.168.1.2:tmp/sama5-hqwNxa/tmp_xoeMN-uImage. Giving up. # PYBOOT: Time: 98.78 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00030-ge0c7384 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9538>] lr : [<c02c6be4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee398190 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : ee8b2ed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa48 ee910e10 c00ffad0 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee26ac60 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551dc8 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c874c 00000000 c0519090 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519090 ee398200 c05180c0 c01c7d74 c046c570 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d90 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c0454510 00000000 df00: 00000000 c04ad35c 00000063 ee83df20 c0035c2c c0035c50 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd7c 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d45efc5d 0fbbed6f 47affddf df80: f9ff7bce 00000000 c03a0980 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0988 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff3 dd7dfd3f [<c02c9538>] (__clk_put) from [<c01ffa48>] (mv_platform_probe+0x2ac/0x414) [<c01ffa48>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0988>] (kernel_init+0x8/0xf0) [<c03a0988>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 4736078c19ba6829 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00030-ge0c7384 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5180>] (dump_stack+0x80/0x90) [<c03a5180>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000095a 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.13 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

mainline boot: 34 pass, 3 fail (v3.14-rc3-53-g91c6c8d)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3-53-g91c6c8d Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 2.6 sec omap4-panda PASS: 1 min 3.9 sec am335x-bone PASS: 0 min 27.3 sec omap5-uevm FAIL: 0 min 31.4 sec omap4-panda-es PASS: 1 min 8.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 44.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 17.2 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.5 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec sun4i-a10-cubieboard PASS: 0 min 17.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.3 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.4 sec tegra30-beaver PASS: 0 min 19.1 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 55.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 55.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.2 sec sun4i-a10-cubieboard PASS: 0 min 18.9 sec bcm28155-ap PASS: 1 min 13.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm FAIL: 0 min 31.4 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 55.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.0 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Connected. Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Connected. Disconnected. Reboot: omap5uevm ; phidget 1 2 : off, sleep, on found: 002/116 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : off, sleep, on found: 002/097 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00053-g91c6c8d #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9530>] lr : [<c02c6bdc>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee397310 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : ee984ed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa44 ee910e10 c00ffab8 c04e2864 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee940f78 de40: 00000086 ee90b210 c0519110 00000000 c0519110 c04e2864 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551e48 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519110 ee90b244 00000000 c01c874c 00000000 c0519110 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519110 ee397380 c0518140 c01c7d74 c046c580 c052ee80 dec0: c0519110 c0519110 00000006 c052ee80 c052ee80 c01c8d90 00000000 c04f7484 dee0: 00000006 c04e2894 c04f7484 c00088bc 00000086 ef7fce08 c0454520 00000000 df00: 00000000 c04ad33c 00000063 ee83df20 c0035c6c c0035cac 80000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e60 c04acd8c 00000006 ef7fce26 00000006 df40: c0507bf0 c04f7484 00000006 c052ee80 c052ee80 c04ce50c 00000086 c04f0b3c df60: c04f0b30 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a0978 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0980 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff5 dd7dfd3f [<c02c9530>] (__clk_put) from [<c01ffa44>] (mv_platform_probe+0x2ac/0x414) [<c01ffa44>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e2894>] (mv_init+0x30/0x50) [<c04e2894>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0980>] (kernel_init+0x8/0xf0) [<c03a0980>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 983adeada6a125c4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00053-g91c6c8d #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5178>] (dump_stack+0x80/0x90) [<c03a5178>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000093a 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ed36 00000001 c052ed36 ee876000 00000000 ee877fe8 c000ee0c c00557a4 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c00557a4>] (cpu_startup_entry+0xf4/0x134) [<c00557a4>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.40 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

mainline boot: 36 pass, 1 fail (v3.14-rc3-43-g805937c)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3-43-g805937c Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 0 min 59.1 sec omap4-panda PASS: 1 min 10.0 sec am335x-bone PASS: 0 min 27.6 sec omap5-uevm PASS: 1 min 0.1 sec omap4-panda-es PASS: 1 min 7.9 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 44.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.1 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec sun4i-a10-cubieboard PASS: 0 min 20.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 19.9 sec tegra30-beaver PASS: 0 min 19.2 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 49.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 55.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.3 sec bcm28155-ap PASS: 1 min 9.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.1 sec omap5-uevm PASS: 1 min 45.5 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 1 min 15.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00043-g805937c #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c94f8>] lr : [<c02c6ba4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee00ac10 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eea510d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa08 ee910e10 c00ffa78 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee00b168 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9d04 c01c9cec c0551dc8 ee90b210 c01c848c 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c870c 00000000 c0519090 c01c8674 c01c6b84 dea0: ee85a7dc ee85e1b4 c0519090 ee00ac80 c05180c0 c01c7d34 c046c580 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d50 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c0454520 00000000 df00: 00000000 c04ad31c 00000063 ee83df20 c0035c2c c0035c30 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd8c 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 47affddf df80: f9ff7bce 00000000 c03a0940 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0948 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff3 dd7dfd3f [<c02c94f8>] (__clk_put) from [<c01ffa08>] (mv_platform_probe+0x2ac/0x414) [<c01ffa08>] (mv_platform_probe) from [<c01c9d04>] (platform_drv_probe+0x18/0x48) [<c01c9d04>] (platform_drv_probe) from [<c01c848c>] (really_probe+0x80/0x214) [<c01c848c>] (really_probe) from [<c01c870c>] (__driver_attach+0x98/0x9c) [<c01c870c>] (__driver_attach) from [<c01c6b84>] (bus_for_each_dev+0x60/0x94) [<c01c6b84>] (bus_for_each_dev) from [<c01c7d34>] (bus_add_driver+0x148/0x1f0) [<c01c7d34>] (bus_add_driver) from [<c01c8d50>] (driver_register+0x78/0xf8) [<c01c8d50>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0948>] (kernel_init+0x8/0xf0) [<c03a0948>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace dbb89e1aa7ea277c ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00043-g805937c #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5140>] (dump_stack+0x80/0x90) [<c03a5140>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000099e 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055764 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055764>] (cpu_startup_entry+0xf4/0x134) [<c0055764>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.13 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

next boot: 36 pass, 1 fail (next-20140218)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140218 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 0 min 58.6 sec omap4-panda PASS: 1 min 9.1 sec omap3-tobi PASS: 0 min 25.9 sec am335x-bone PASS: 0 min 32.3 sec omap5-uevm PASS: 1 min 0.9 sec omap4-panda-es PASS: 1 min 9.7 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 48.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 16.7 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 58.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec sun4i-a10-cubieboard PASS: 0 min 12.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.3 sec tegra30-beaver PASS: 0 min 22.4 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 49.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 21.9 sec omap4-panda PASS: 0 min 52.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 18.6 sec bcm28155-ap PASS: 1 min 13.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.0 sec omap3-tobi PASS: 0 min 21.7 sec am335x-bone PASS: 0 min 26.6 sec omap5-uevm FAIL: 0 min 31.4 sec imx6q-wandboard PASS: 0 min 17.1 sec omap4-panda-es PASS: 0 min 59.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : off, sleep, on found: 002/041 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

next boot: 37 pass, 0 fail (next-20140217)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140217 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 26.7 sec omap3-beagle-xm PASS: 1 min 0.5 sec omap4-panda PASS: 1 min 8.2 sec omap3-tobi PASS: 0 min 26.8 sec am335x-bone PASS: 0 min 28.2 sec omap5-uevm PASS: 1 min 0.8 sec omap4-panda-es PASS: 1 min 4.5 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 44.1 sec sun7i-a20-cubieboard2 PASS: 0 min 14.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.5 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.1 sec imx6q-wandboard PASS: 0 min 17.4 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 14.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec sun4i-a10-cubieboard PASS: 0 min 12.7 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 31.1 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.7 sec tegra30-beaver PASS: 0 min 30.5 sec am335x-boneblack PASS: 0 min 24.3 sec omap3-beagle-xm PASS: 0 min 45.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 0 min 57.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.4 sec sun4i-a10-cubieboard PASS: 0 min 14.3 sec bcm28155-ap PASS: 1 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec omap3-tobi PASS: 0 min 22.1 sec am335x-bone PASS: 0 min 31.7 sec omap5-uevm PASS: 1 min 50.0 sec imx6q-wandboard PASS: 0 min 17.7 sec omap4-panda-es PASS: 0 min 56.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.8 sec

11 years, 3 months

1
0
0 0

mainline boot: 35 pass, 2 fail (v3.14-rc3-20-g60f76ea)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3-20-g60f76ea Failed boot tests (console logs at the end) =========================================== omap3-beagle-xm: FAIL: omap2plus_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm FAIL: 0 min 56.8 sec omap4-panda PASS: 1 min 12.2 sec am335x-bone PASS: 0 min 27.5 sec omap5-uevm PASS: 0 min 55.6 sec omap4-panda-es PASS: 1 min 5.4 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 46.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.1 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 58.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec sun4i-a10-cubieboard PASS: 0 min 17.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 21.1 sec tegra30-beaver PASS: 0 min 19.2 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 48.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec armada-370-mirabox PASS: 0 min 22.5 sec omap4-panda PASS: 0 min 56.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 19.0 sec bcm28155-ap PASS: 1 min 3.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.1 sec omap5-uevm PASS: 1 min 51.1 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 51.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 29.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org #dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730xm-RxVrLm/zImage OMAP3 beagleboard.org # tftp ${loadaddr} 192.168.1.2:tmp/3730xm-RxVrLm/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-RxVrLm/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################ 509.8 KiB/s done Bytes transferred = 4278864 (414a50 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 89.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-RxVrLm/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-RxVrLm/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-RxVrLm/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 5.9 KiB/s done Bytes transferred = 57382 (e026 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62025 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.76 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00020-g60f76ea #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c94f8>] lr : [<c02c6ba4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee9dcc10 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eea530d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa08 ee910e10 c00ffa78 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee9dd168 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9d04 c01c9cec c0551dc8 ee90b210 c01c848c 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c870c 00000000 c0519090 c01c8674 c01c6b84 dea0: ee85a7dc ee85e1b4 c0519090 ee9dcc80 c05180c0 c01c7d34 c046c580 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d50 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000061 00000042 ef7fce00 c03bd7e0 df00: 00000000 ef7fce08 c0454520 00000000 00000061 c04ad39c 00000063 ee83df30 df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd8c 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 4faffddf df80: fbff7bde 00000000 c03a0940 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0948 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fef3 dd7dfd3f [<c02c94f8>] (__clk_put) from [<c01ffa08>] (mv_platform_probe+0x2ac/0x414) [<c01ffa08>] (mv_platform_probe) from [<c01c9d04>] (platform_drv_probe+0x18/0x48) [<c01c9d04>] (platform_drv_probe) from [<c01c848c>] (really_probe+0x80/0x214) [<c01c848c>] (really_probe) from [<c01c870c>] (__driver_attach+0x98/0x9c) [<c01c870c>] (__driver_attach) from [<c01c6b84>] (bus_for_each_dev+0x60/0x94) [<c01c6b84>] (bus_for_each_dev) from [<c01c7d34>] (bus_add_driver+0x148/0x1f0) [<c01c7d34>] (bus_add_driver) from [<c01c8d50>] (driver_register+0x78/0xf8) [<c01c8d50>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0948>] (kernel_init+0x8/0xf0) [<c03a0948>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace bc31c268d5c85644 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00020-g60f76ea #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5140>] (dump_stack+0x80/0x90) [<c03a5140>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 000009a4 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055764 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055764>] (cpu_startup_entry+0xf4/0x134) [<c0055764>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.42 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

mainline boot: 36 pass, 1 fail (v3.14-rc3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 0 min 58.1 sec omap4-panda PASS: 1 min 9.5 sec am335x-bone PASS: 0 min 27.7 sec omap5-uevm PASS: 0 min 59.9 sec omap4-panda-es PASS: 1 min 10.5 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 47.1 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec imx6q-wandboard PASS: 0 min 17.1 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.3 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.8 sec sun4i-a10-cubieboard PASS: 0 min 15.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.3 sec tegra30-beaver PASS: 0 min 19.4 sec am335x-boneblack PASS: 0 min 23.3 sec omap3-beagle-xm PASS: 0 min 45.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 54.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 21.9 sec bcm28155-ap PASS: 1 min 10.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec am335x-bone PASS: 0 min 26.1 sec omap5-uevm PASS: 1 min 55.2 sec imx6q-wandboard PASS: 0 min 17.7 sec omap4-panda-es PASS: 0 min 55.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9538>] lr : [<c02c6be4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee39d290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa48 ee910e10 c00ffad0 c04e283c 0000001f de20: ee910e10 00000002 c03c3d00 00000000 74726f70 ee910030 00000001 ee251ca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551dc8 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c874c 00000000 c0519090 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519090 ee39d300 c05180c0 c01c7d74 c046c508 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d90 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c04544c0 00000000 df00: 00000000 c04ad2f4 00000063 ee83df20 c0035c2c c0035c50 00000113 ffffffff df20: ef7fce1b c03bd7a0 00000086 c0035e20 c04acd14 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a0980 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0988 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd7f [<c02c9538>] (__clk_put) from [<c01ffa48>] (mv_platform_probe+0x2ac/0x414) [<c01ffa48>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0988>] (kernel_init+0x8/0xf0) [<c03a0988>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 747738b09d0d9301 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5180>] (dump_stack+0x80/0x90) [<c03a5180>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000946 00000000 ee876000 c05024ac c03ac9bc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.41 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

Back to work :)

by Deepak Saxena

Wanted to let everyone know that I'm back from my wanderings in India. I am working on catching up with emails and getting the Engineering Update done, please just email me or ping me on gchat if you need anything urgent from me. I'm in San Francisco until LCA, so on my regular PST time zone if anyone is scheduling meetings with me. ~Deepak -- Deepak Saxena - Kernel Working Group Lead Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro

11 years, 3 months

1
0
0 0

[PATCH 0/2] remove newly introduced calls to cpuidle_idle_call()

by Nicolas Pitre

Peter/Ingo: Those should probably go into tip as soon as possible to follow what I already sent earlier. These are new references to cpuidle_idle_call that were introduced since -rc1.

11 years, 3 months

1
2
0 0

mainline boot: 36 pass, 1 fail (v3.14-rc2-538-g946dd68)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc2-538-g946dd68 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 0 min 59.1 sec omap4-panda PASS: 1 min 12.9 sec am335x-bone PASS: 0 min 27.6 sec omap5-uevm PASS: 0 min 59.5 sec omap4-panda-es PASS: 1 min 5.5 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 46.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.4 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.5 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec sun4i-a10-cubieboard PASS: 0 min 17.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.5 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 51.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 0 min 58.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard PASS: 0 min 19.1 sec bcm28155-ap PASS: 1 min 4.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.1 sec omap5-uevm PASS: 1 min 44.8 sec imx6q-wandboard PASS: 0 min 17.7 sec omap4-panda-es PASS: 0 min 51.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00538-g946dd68 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c94e8>] lr : [<c02c6b94>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee39d290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa48 ee910e10 c00ffad0 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee251ca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551dc8 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c874c 00000000 c0519090 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519090 ee39d300 c05180c0 c01c7d74 c046c570 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d90 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 0000006d 00000042 ef7fce00 c03bd7e0 df00: 00000000 ef7fce08 c0454510 00000000 0000005f c04ad36c 00000063 ee83df30 df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd7c 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a0930 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0938 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fef7 dd7dfd3b [<c02c94e8>] (__clk_put) from [<c01ffa48>] (mv_platform_probe+0x2ac/0x414) [<c01ffa48>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0938>] (kernel_init+0x8/0xf0) [<c03a0938>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 95f0dafa88226692 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc2-00538-g946dd68 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5130>] (dump_stack+0x80/0x90) [<c03a5130>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000940 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.25 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

mainline boot: 36 pass, 1 fail (v3.14-rc2-517-g9bd01b9)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc2-517-g9bd01b9 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 0 min 57.5 sec omap4-panda PASS: 1 min 8.8 sec am335x-bone PASS: 0 min 27.4 sec omap5-uevm PASS: 0 min 57.2 sec omap4-panda-es PASS: 1 min 14.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 45.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.3 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.2 sec sun4i-a10-cubieboard PASS: 0 min 17.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.7 sec tegra30-beaver PASS: 0 min 19.7 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 45.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 53.4 sec armada-xp-openblocks-ax3-4 PASS: 1 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 17.1 sec bcm28155-ap PASS: 1 min 20.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 47.3 sec imx6q-wandboard PASS: 0 min 17.5 sec omap4-panda-es PASS: 0 min 51.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00517-g9bd01b9 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9474>] lr : [<c02c6b20>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee39ec10 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eeb4f0d0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff9a8 ee910e10 c00ffa20 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee39f168 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9ca4 c01c9c8c c0551dc8 ee90b210 c01c842c 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c86ac 00000000 c0519090 c01c8614 c01c6b24 dea0: ee85a7dc ee85e1b4 c0519090 ee39ec80 c05180c0 c01c7cd4 c046c540 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8cf0 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c04544e0 00000000 df00: 00000000 c04ad378 00000063 ee83df20 c0035c2c c0035c50 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd28 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d45efc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a08bc 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a08c4 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd3b [<c02c9474>] (__clk_put) from [<c01ff9a8>] (mv_platform_probe+0x2ac/0x414) [<c01ff9a8>] (mv_platform_probe) from [<c01c9ca4>] (platform_drv_probe+0x18/0x48) [<c01c9ca4>] (platform_drv_probe) from [<c01c842c>] (really_probe+0x80/0x214) [<c01c842c>] (really_probe) from [<c01c86ac>] (__driver_attach+0x98/0x9c) [<c01c86ac>] (__driver_attach) from [<c01c6b24>] (bus_for_each_dev+0x60/0x94) [<c01c6b24>] (bus_for_each_dev) from [<c01c7cd4>] (bus_add_driver+0x148/0x1f0) [<c01c7cd4>] (bus_add_driver) from [<c01c8cf0>] (driver_register+0x78/0xf8) [<c01c8cf0>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a08c4>] (kernel_init+0x8/0xf0) [<c03a08c4>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 729a5bf572bbc6c5 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc2-00517-g9bd01b9 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a50bc>] (dump_stack+0x80/0x90) [<c03a50bc>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 000009a4 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.14 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

[PATCH] ASoC: io: Remove SPI support

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> All ASoC CODEC drivers that use SPI have now been converted to use regmap so we can delete SND_SOC_SPI, preventing any new users being added. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- include/sound/soc.h | 1 - sound/soc/soc-io.c | 7 ------- 2 files changed, 8 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 21d025e..21038e0 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -356,7 +356,6 @@ extern struct snd_ac97_bus_ops *soc_ac97_ops; enum snd_soc_control_type { SND_SOC_I2C = 1, - SND_SOC_SPI, SND_SOC_REGMAP, }; diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c index aa886cc..3a0d99e 100644 --- a/sound/soc/soc-io.c +++ b/sound/soc/soc-io.c @@ -106,13 +106,6 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec, break; #endif -#if IS_ENABLED(CONFIG_REGMAP_SPI) - case SND_SOC_SPI: - codec->control_data = regmap_init_spi(to_spi_device(codec->dev), - &config); - break; -#endif - case SND_SOC_REGMAP: /* Device has made its own regmap arrangements */ codec->using_regmap = true; -- 1.9.0.rc3

11 years, 3 months

1
0
0 0

[PATCH] ASoC: pcm512x: Add regmap select

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> We need at least the core regmap code to build. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 56d0c28..fa47a83 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -316,6 +316,7 @@ config SND_SOC_PCM3008 config SND_SOC_PCM512x tristate "Texas Instruments PCM512x CODECs" + select REGMAP config SND_SOC_RT5631 tristate -- 1.9.0.rc3

11 years, 3 months

1
0
0 0

mainline boot: 35 pass, 2 fail (v3.14-rc2-488-gca03339)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc2-488-gca03339 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 8.5 sec omap4-panda PASS: 1 min 3.1 sec am335x-bone PASS: 0 min 27.5 sec omap5-uevm PASS: 0 min 58.6 sec omap4-panda-es PASS: 1 min 13.7 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 46.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 21.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.3 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 14.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec sun4i-a10-cubieboard PASS: 0 min 17.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.4 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.4 sec tegra30-beaver PASS: 0 min 24.4 sec am335x-boneblack PASS: 0 min 23.7 sec omap3-beagle-xm PASS: 0 min 47.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda PASS: 0 min 59.4 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 22.0 sec bcm28155-ap PASS: 1 min 8.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec am335x-bone PASS: 0 min 26.1 sec omap5-uevm PASS: 1 min 51.6 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 54.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ [ 0.434374] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.455625] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.188807] console [ttyS0] enabled [ 1.212800] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222019] Serial: IMX driver [ 1.225290] STMicroelectronics ASC driver initialized [ 1.230707] serial: Freescale lpuart driver [ 1.234995] [drm] Initialized drm 1.1.0 20060810 [ 1.242588] loop: module loaded [ 1.246204] sata_mv d00a0000.sata: version 1.28 [ 1.250828] sata_mv d00a0000.sata: unable to find phy [ 1.255901] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264029] pgd = c0004000 [ 1.266752] [00000054] *pgd=00000000 [ 1.270350] Internal error: Oops: 5 [#1] SMP ARM [ 1.274977] Modules linked in: [ 1.278051] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00488-gca03339 #1 [ 1.285639] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291060] PC is at __clk_put+0x1c/0x8c [ 1.294994] LR is at clk_prepare_lock+0x10/0xfc [ 1.299536] pc : [<c0494940>] lr : [<c0491fec>] psr: 60000113 [ 1.299536] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311041] r10: ed399b90 r9 : ed0d3c00 r8 : 00000004 [ 1.316278] r7 : ffffffed r6 : 00000000 r5 : ed1530d0 r4 : 00000000 [ 1.322821] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.329364] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.336690] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.342450] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.348470] Stack: (0xed059e10 to 0xed05a000) [ 1.352838] 9e00: 00000001 c0361b10 c085c730 000000df [ 1.361037] 9e20: ed0ce1b0 00000002 c0609db4 00000000 74726f70 ed0c0030 00000001 ed3a1990 [ 1.369236] 9e40: 000000df ed0d3c10 c091eb38 00000000 c091eb38 c085c730 000000df ed058030 [ 1.377436] 9e60: 00000000 c0304fec c0304fd4 ed0d3c10 c0987dcc c0303848 00000000 ed0d3c10 [ 1.385636] 9e80: c091eb38 ed0d3c44 00000000 c0303a34 00000000 c091eb38 c03039a8 c0301e60 [ 1.393835] 9ea0: ed03b85c ed09a934 c091eb38 ed399b00 c0918ef8 c0303010 c0777f8c c094d800 [ 1.402034] 9ec0: c091eb38 c091eb38 00000006 c094d800 c094d800 c0304038 00000000 c08a11ac [ 1.410233] 9ee0: 00000006 c085c760 c08a11ac c0008bbc ed003c00 c072c6a4 ed0c7380 c05a5da0 [ 1.418434] 9f00: 00000000 c094d800 c082350c c012dd0c 00000000 c08e83d8 60000113 00000001 [ 1.426633] 9f20: ee7ffe1b c05b5578 000000df c005d48c c07ed594 00000006 ee7ffe26 00000006 [ 1.434832] 9f40: c08e83c8 c08a11ac 00000006 c094d800 c094d800 c082350c 000000df c08838e4 [ 1.443032] 9f60: c08838d8 c0823c48 00000006 00000006 c082350c 88854891 15413389 b850a414 [ 1.451231] 9f80: 15a48c42 00000000 c05950e0 00000000 00000000 00000000 00000000 00000000 [ 1.459431] 9fa0: 00000000 c05950e8 00000000 c000e5b8 00000000 00000000 00000000 00000000 [ 1.467630] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.475830] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c9451f25 254584d0 [ 1.484039] [<c0494940>] (__clk_put) from [<c0361b10>] (mv_platform_probe+0x2c0/0x43c) [ 1.491983] [<c0361b10>] (mv_platform_probe) from [<c0304fec>] (platform_drv_probe+0x18/0x48) [ 1.500535] [<c0304fec>] (platform_drv_probe) from [<c0303848>] (driver_probe_device+0x124/0x240) [ 1.509433] [<c0303848>] (driver_probe_device) from [<c0303a34>] (__driver_attach+0x8c/0x90) [ 1.517894] [<c0303a34>] (__driver_attach) from [<c0301e60>] (bus_for_each_dev+0x60/0x94) [ 1.526094] [<c0301e60>] (bus_for_each_dev) from [<c0303010>] (bus_add_driver+0x148/0x1f0) [ 1.534381] [<c0303010>] (bus_add_driver) from [<c0304038>] (driver_register+0x78/0xf8) [ 1.542409] [<c0304038>] (driver_register) from [<c085c760>] (mv_init+0x30/0x50) [ 1.549828] [<c085c760>] (mv_init) from [<c0008bbc>] (do_one_initcall+0xf8/0x144) [ 1.557337] [<c0008bbc>] (do_one_initcall) from [<c0823c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566061] [<c0823c48>] (kernel_init_freeable) from [<c05950e8>] (kernel_init+0x8/0xf0) [ 1.574177] [<c05950e8>] (kernel_init) from [<c000e5b8>] (ret_from_fork+0x14/0x3c) [ 1.581768] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.587909] ---[ end trace 64a00321adea3813 ]--- [ 1.592548] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.592548] [ 1.601708] CPU0: stopping [ 1.604426] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc2-00488-gca03339 #1 [ 1.612984] [<c001588c>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 1.620754] [<c001143c>] (show_stack) from [<c059ac54>] (dump_stack+0x84/0x94) [ 1.627997] [<c059ac54>] (dump_stack) from [<c0014160>] (handle_IPI+0x148/0x174) [ 1.635414] [<c0014160>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x110) [ 1.643963] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x50) [ 1.652334] Exception stack(0xc08a5f68 to 0xc08a5fb0) [ 1.657399] 5f60: ffffffed 2d734000 c08ad4e4 00000000 c08ac4cc c08a4000 [ 1.665599] 5f80: c08ac450 c094d68b c05a5128 c08a4000 c094d68b c08a4000 00000000 c08a5fb0 [ 1.673796] 5fa0: c000f158 c0081194 60000113 ffffffff [ 1.678866] [<c0011fc0>] (__irq_svc) from [<c0081194>] (cpu_startup_entry+0x100/0x144) [ 1.686807] [<c0081194>] (cpu_startup_entry) from [<c0823b00>] (start_kernel+0x358/0x364) [ 1.695007] [<c0823b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 22.74 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00488-gca03339 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9474>] lr : [<c02c6b20>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee39c290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : ee92ded0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff9a8 ee910e10 c00ffa20 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee3a6ca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9ca4 c01c9c8c c0551dc8 ee90b210 c01c842c 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c86ac 00000000 c0519090 c01c8614 c01c6b24 dea0: ee85a7dc ee85e1b4 c0519090 ee39c300 c05180c0 c01c7cd4 c046c540 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8cf0 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c04544e0 00000000 df00: 00000000 c04ad328 00000063 ee83df20 c0035c2c c0169f10 20000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd28 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456f45d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a08bc 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a08c4 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff1 dd7dfd3b [<c02c9474>] (__clk_put) from [<c01ff9a8>] (mv_platform_probe+0x2ac/0x414) [<c01ff9a8>] (mv_platform_probe) from [<c01c9ca4>] (platform_drv_probe+0x18/0x48) [<c01c9ca4>] (platform_drv_probe) from [<c01c842c>] (really_probe+0x80/0x214) [<c01c842c>] (really_probe) from [<c01c86ac>] (__driver_attach+0x98/0x9c) [<c01c86ac>] (__driver_attach) from [<c01c6b24>] (bus_for_each_dev+0x60/0x94) [<c01c6b24>] (bus_for_each_dev) from [<c01c7cd4>] (bus_add_driver+0x148/0x1f0) [<c01c7cd4>] (bus_add_driver) from [<c01c8cf0>] (driver_register+0x78/0xf8) [<c01c8cf0>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a08c4>] (kernel_init+0x8/0xf0) [<c03a08c4>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 49e66b8543bfd03e ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc2-00488-gca03339 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a50bc>] (dump_stack+0x80/0x90) [<c03a50bc>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000094a 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.14 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

mainline boot: 35 pass, 2 fail (v3.14-rc2-342-g5e57dc8)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc2-342-g5e57dc8 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.5 sec omap3-beagle-xm PASS: 0 min 60.0 sec omap4-panda PASS: 1 min 8.8 sec am335x-bone PASS: 0 min 27.3 sec omap5-uevm PASS: 0 min 56.6 sec omap4-panda-es PASS: 1 min 11.3 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 46.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec imx6q-wandboard PASS: 0 min 16.9 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 3.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec sun4i-a10-cubieboard PASS: 0 min 17.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.1 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.6 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 52.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 21.9 sec omap4-panda PASS: 0 min 55.6 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 23.3 sec sun4i-a10-cubieboard PASS: 0 min 18.5 sec bcm28155-ap PASS: 1 min 4.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.3 sec omap5-uevm PASS: 1 min 50.5 sec imx6q-wandboard PASS: 0 min 17.5 sec omap4-panda-es PASS: 0 min 52.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.0 sec sama5_defconfig --------------- sama5d35ek PASS: 1 min 48.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ [ 0.434435] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.455690] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.188877] console [ttyS0] enabled [ 1.212872] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222090] Serial: IMX driver [ 1.225361] STMicroelectronics ASC driver initialized [ 1.230783] serial: Freescale lpuart driver [ 1.235071] [drm] Initialized drm 1.1.0 20060810 [ 1.242678] loop: module loaded [ 1.246293] sata_mv d00a0000.sata: version 1.28 [ 1.250915] sata_mv d00a0000.sata: unable to find phy [ 1.255988] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264117] pgd = c0004000 [ 1.266839] [00000054] *pgd=00000000 [ 1.270437] Internal error: Oops: 5 [#1] SMP ARM [ 1.275063] Modules linked in: [ 1.278138] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00342-g5e57dc8 #1 [ 1.285726] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291148] PC is at __clk_put+0x1c/0x8c [ 1.295081] LR is at clk_prepare_lock+0x10/0xfc [ 1.299623] pc : [<c049483c>] lr : [<c0491ee8>] psr: 60000113 [ 1.299623] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311128] r10: ed399b90 r9 : ed0d3c00 r8 : 00000004 [ 1.316366] r7 : ffffffed r6 : 00000000 r5 : ed1530d0 r4 : 00000000 [ 1.322908] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.329451] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.336778] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.342537] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.348558] Stack: (0xed059e10 to 0xed05a000) [ 1.352926] 9e00: 00000001 c0361960 c085c730 000000df [ 1.361127] 9e20: ed0ce1b0 00000002 c0609db4 00000000 74726f70 ed0c0030 00000001 ed3a1990 [ 1.369327] 9e40: 000000df ed0d3c10 c091eb38 00000000 c091eb38 c085c730 000000df ed058030 [ 1.377527] 9e60: 00000000 c0304e3c c0304e24 ed0d3c10 c0987d8c c0303698 00000000 ed0d3c10 [ 1.385727] 9e80: c091eb38 ed0d3c44 00000000 c0303884 00000000 c091eb38 c03037f8 c0301cb0 [ 1.393927] 9ea0: ed03b85c ed09a934 c091eb38 ed399b00 c0918ef8 c0302e60 c0777f94 c094d7c0 [ 1.402128] 9ec0: c091eb38 c091eb38 00000006 c094d7c0 c094d7c0 c0303e88 00000000 c08a11ac [ 1.410328] 9ee0: 00000006 c085c760 c08a11ac c0008bbc ed003c00 c072c6c4 ed0c7380 c05a5da0 [ 1.418528] 9f00: 00000000 c094d7c0 c082350c c012dd0c 00000000 c08e83d8 60000113 00000001 [ 1.426728] 9f20: ee7ffe1b c05b5578 000000df c005d48c c07ed604 00000006 ee7ffe26 00000006 [ 1.434928] 9f40: c08e83c8 c08a11ac 00000006 c094d7c0 c094d7c0 c082350c 000000df c08838dc [ 1.443128] 9f60: c08838d0 c0823c48 00000006 00000006 c082350c 88855891 15413389 9850a414 [ 1.451328] 9f80: 05a08542 00000000 c0594fd0 00000000 00000000 00000000 00000000 00000000 [ 1.459528] 9fa0: 00000000 c0594fd8 00000000 c000e5b8 00000000 00000000 00000000 00000000 [ 1.467728] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.475927] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d9441725 254584d0 [ 1.484136] [<c049483c>] (__clk_put) from [<c0361960>] (mv_platform_probe+0x2c0/0x43c) [ 1.492081] [<c0361960>] (mv_platform_probe) from [<c0304e3c>] (platform_drv_probe+0x18/0x48) [ 1.500631] [<c0304e3c>] (platform_drv_probe) from [<c0303698>] (driver_probe_device+0x124/0x240) [ 1.509528] [<c0303698>] (driver_probe_device) from [<c0303884>] (__driver_attach+0x8c/0x90) [ 1.517989] [<c0303884>] (__driver_attach) from [<c0301cb0>] (bus_for_each_dev+0x60/0x94) [ 1.526189] [<c0301cb0>] (bus_for_each_dev) from [<c0302e60>] (bus_add_driver+0x148/0x1f0) [ 1.534476] [<c0302e60>] (bus_add_driver) from [<c0303e88>] (driver_register+0x78/0xf8) [ 1.542505] [<c0303e88>] (driver_register) from [<c085c760>] (mv_init+0x30/0x50) [ 1.549924] [<c085c760>] (mv_init) from [<c0008bbc>] (do_one_initcall+0xf8/0x144) [ 1.557432] [<c0008bbc>] (do_one_initcall) from [<c0823c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566157] [<c0823c48>] (kernel_init_freeable) from [<c0594fd8>] (kernel_init+0x8/0xf0) [ 1.574273] [<c0594fd8>] (kernel_init) from [<c000e5b8>] (ret_from_fork+0x14/0x3c) [ 1.581864] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.588006] ---[ end trace c33a4454e1fbf65c ]--- [ 1.592645] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.592645] [ 1.601805] CPU0: stopping [ 1.604522] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc2-00342-g5e57dc8 #1 [ 1.613079] [<c001588c>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 1.620848] [<c001143c>] (show_stack) from [<c059ab44>] (dump_stack+0x84/0x94) [ 1.628092] [<c059ab44>] (dump_stack) from [<c0014160>] (handle_IPI+0x148/0x174) [ 1.635509] [<c0014160>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x110) [ 1.644059] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x50) [ 1.652430] Exception stack(0xc08a5f68 to 0xc08a5fb0) [ 1.657496] 5f60: ffffffed 2d734000 c08ad4e4 00000000 c08ac4cc c08a4000 [ 1.665696] 5f80: c08ac450 c094d64b c05a5128 c08a4000 c094d64b c08a4000 00000000 c08a5fb0 [ 1.673893] 5fa0: c000f158 c0081194 60000113 ffffffff [ 1.678963] [<c0011fc0>] (__irq_svc) from [<c0081194>] (cpu_startup_entry+0x100/0x144) [ 1.686906] [<c0081194>] (cpu_startup_entry) from [<c0823b00>] (start_kernel+0x358/0x364) [ 1.695105] [<c0823b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 23.32 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00342-g5e57dc8 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c93a4>] lr : [<c02c6a50>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee38e290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff878 ee910e10 c00ffa20 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee397ca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9b74 c01c9b5c c0551d88 ee90b210 c01c82fc 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c857c 00000000 c0519090 c01c84e4 c01c69f4 dea0: ee85a7dc ee85e1b4 c0519090 ee38e300 c05180c0 c01c7ba4 c046c538 c052edc0 dec0: c0519090 c0519090 00000006 c052edc0 c052edc0 c01c8bc0 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c04544f0 00000000 df00: 00000000 c04ad260 00000063 ee83df20 c0035c2c c0035c5c 20000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd10 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052edc0 c052edc0 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456fc5d 0ffbed6f 4faffddf df80: fbff7bce 00000000 c03a07ec 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a07f4 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fef7 dd7dfd3f [<c02c93a4>] (__clk_put) from [<c01ff878>] (mv_platform_probe+0x2ac/0x414) [<c01ff878>] (mv_platform_probe) from [<c01c9b74>] (platform_drv_probe+0x18/0x48) [<c01c9b74>] (platform_drv_probe) from [<c01c82fc>] (really_probe+0x80/0x214) [<c01c82fc>] (really_probe) from [<c01c857c>] (__driver_attach+0x98/0x9c) [<c01c857c>] (__driver_attach) from [<c01c69f4>] (bus_for_each_dev+0x60/0x94) [<c01c69f4>] (bus_for_each_dev) from [<c01c7ba4>] (bus_add_driver+0x148/0x1f0) [<c01c7ba4>] (bus_add_driver) from [<c01c8bc0>] (driver_register+0x78/0xf8) [<c01c8bc0>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a07f4>] (kernel_init+0x8/0xf0) [<c03a07f4>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace e70d32457195a06b ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc2-00342-g5e57dc8 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a4fec>] (dump_stack+0x80/0x90) [<c03a4fec>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000094a 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.21 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

mainline boot: 35 pass, 2 fail (v3.14-rc2-372-g8ba7451)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc2-372-g8ba7451 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.4 sec omap3-beagle-xm PASS: 1 min 0.5 sec omap4-panda PASS: 1 min 6.8 sec am335x-bone PASS: 0 min 27.8 sec omap5-uevm PASS: 1 min 0.5 sec omap4-panda-es PASS: 1 min 6.7 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 47.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.2 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec sun4i-a10-cubieboard PASS: 0 min 17.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.3 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.5 sec omap3-beagle-xm PASS: 0 min 51.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 55.2 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 18.7 sec bcm28155-ap PASS: 1 min 14.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 44.5 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 52.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 32.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ [ 0.434462] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.455719] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.188896] console [ttyS0] enabled [ 1.212891] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222111] Serial: IMX driver [ 1.225383] STMicroelectronics ASC driver initialized [ 1.230804] serial: Freescale lpuart driver [ 1.235093] [drm] Initialized drm 1.1.0 20060810 [ 1.242702] loop: module loaded [ 1.246320] sata_mv d00a0000.sata: version 1.28 [ 1.250944] sata_mv d00a0000.sata: unable to find phy [ 1.256017] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264146] pgd = c0004000 [ 1.266868] [00000054] *pgd=00000000 [ 1.270465] Internal error: Oops: 5 [#1] SMP ARM [ 1.275093] Modules linked in: [ 1.278168] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00372-g8ba7451 #1 [ 1.285756] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291177] PC is at __clk_put+0x1c/0x8c [ 1.295111] LR is at clk_prepare_lock+0x10/0xfc [ 1.299653] pc : [<c0494880>] lr : [<c0491f2c>] psr: 60000113 [ 1.299653] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311159] r10: ed399b90 r9 : ed0d3c00 r8 : 00000004 [ 1.316395] r7 : ffffffed r6 : 00000000 r5 : ed1530d0 r4 : 00000000 [ 1.322939] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.329483] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.336809] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.342568] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.348589] Stack: (0xed059e10 to 0xed05a000) [ 1.352958] 9e00: 00000001 c03619a0 c085c730 000000df [ 1.361158] 9e20: ed0ce1b0 00000002 c0609db4 00000000 74726f70 ed0c0030 00000001 ed3a1990 [ 1.369358] 9e40: 000000df ed0d3c10 c091eb38 00000000 c091eb38 c085c730 000000df ed058030 [ 1.377558] 9e60: 00000000 c0304e7c c0304e64 ed0d3c10 c0987d8c c03036d8 00000000 ed0d3c10 [ 1.385758] 9e80: c091eb38 ed0d3c44 00000000 c03038c4 00000000 c091eb38 c0303838 c0301cf0 [ 1.393958] 9ea0: ed03b85c ed09a934 c091eb38 ed399b00 c0918ef8 c0302ea0 c0777f84 c094d7c0 [ 1.402158] 9ec0: c091eb38 c091eb38 00000006 c094d7c0 c094d7c0 c0303ec8 00000000 c08a11ac [ 1.410358] 9ee0: 00000006 c085c760 c08a11ac c0008bbc ed003c00 c072c6b4 ed0c7380 c05a5da0 [ 1.418558] 9f00: 00000000 c094d7c0 c082350c c012dd0c 00000000 c08e83d8 60000113 00000001 [ 1.426758] 9f20: ee7ffe1b c05b5578 000000df c005d48c c07ed5f4 00000006 ee7ffe26 00000006 [ 1.434958] 9f40: c08e83c8 c08a11ac 00000006 c094d7c0 c094d7c0 c082350c 000000df c08838dc [ 1.443158] 9f60: c08838d0 c0823c48 00000006 00000006 c082350c 88855891 15413389 b850a414 [ 1.451358] 9f80: 15a48d42 00000000 c0595014 00000000 00000000 00000000 00000000 00000000 [ 1.459557] 9fa0: 00000000 c059501c 00000000 c000e5b8 00000000 00000000 00000000 00000000 [ 1.467757] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.475956] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c9451725 254584d0 [ 1.484165] [<c0494880>] (__clk_put) from [<c03619a0>] (mv_platform_probe+0x2c0/0x43c) [ 1.492109] [<c03619a0>] (mv_platform_probe) from [<c0304e7c>] (platform_drv_probe+0x18/0x48) [ 1.500660] [<c0304e7c>] (platform_drv_probe) from [<c03036d8>] (driver_probe_device+0x124/0x240) [ 1.509557] [<c03036d8>] (driver_probe_device) from [<c03038c4>] (__driver_attach+0x8c/0x90) [ 1.518019] [<c03038c4>] (__driver_attach) from [<c0301cf0>] (bus_for_each_dev+0x60/0x94) [ 1.526219] [<c0301cf0>] (bus_for_each_dev) from [<c0302ea0>] (bus_add_driver+0x148/0x1f0) [ 1.534506] [<c0302ea0>] (bus_add_driver) from [<c0303ec8>] (driver_register+0x78/0xf8) [ 1.542535] [<c0303ec8>] (driver_register) from [<c085c760>] (mv_init+0x30/0x50) [ 1.549954] [<c085c760>] (mv_init) from [<c0008bbc>] (do_one_initcall+0xf8/0x144) [ 1.557463] [<c0008bbc>] (do_one_initcall) from [<c0823c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566187] [<c0823c48>] (kernel_init_freeable) from [<c059501c>] (kernel_init+0x8/0xf0) [ 1.574303] [<c059501c>] (kernel_init) from [<c000e5b8>] (ret_from_fork+0x14/0x3c) [ 1.581894] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.588036] ---[ end trace 0f85a795857d28f3 ]--- [ 1.592676] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.592676] [ 1.601837] CPU0: stopping [ 1.604554] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc2-00372-g8ba7451 #1 [ 1.613112] [<c001588c>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 1.620882] [<c001143c>] (show_stack) from [<c059ab88>] (dump_stack+0x84/0x94) [ 1.628127] [<c059ab88>] (dump_stack) from [<c0014160>] (handle_IPI+0x148/0x174) [ 1.635544] [<c0014160>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x110) [ 1.644092] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x50) [ 1.652463] Exception stack(0xc08a5f68 to 0xc08a5fb0) [ 1.657528] 5f60: ffffffed 2d734000 c08ad4e4 00000000 c08ac4cc c08a4000 [ 1.665729] 5f80: c08ac450 c094d64b c05a5128 c08a4000 c094d64b c08a4000 00000000 c08a5fb0 [ 1.673927] 5fa0: c000f158 c0081194 60000113 ffffffff [ 1.678997] [<c0011fc0>] (__irq_svc) from [<c0081194>] (cpu_startup_entry+0x100/0x144) [ 1.686939] [<c0081194>] (cpu_startup_entry) from [<c0823b00>] (start_kernel+0x358/0x364) [ 1.695139] [<c0823b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 22.75 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00372-g8ba7451 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c93a4>] lr : [<c02c6a50>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee394290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff878 ee910e10 c00ffa20 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee39dca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9b74 c01c9b5c c0551d88 ee90b210 c01c82fc 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c857c 00000000 c0519090 c01c84e4 c01c69f4 dea0: ee85a7dc ee85e1b4 c0519090 ee394300 c05180c0 c01c7ba4 c046c538 c052edc0 dec0: c0519090 c0519090 00000006 c052edc0 c052edc0 c01c8bc0 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c04544f0 00000000 df00: 00000000 c04ad330 00000063 ee83df20 c0035c2c c0035c4c 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd10 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052edc0 c052edc0 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d45efc5d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a07ec 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a07f4 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fef7 dd7dfd3f [<c02c93a4>] (__clk_put) from [<c01ff878>] (mv_platform_probe+0x2ac/0x414) [<c01ff878>] (mv_platform_probe) from [<c01c9b74>] (platform_drv_probe+0x18/0x48) [<c01c9b74>] (platform_drv_probe) from [<c01c82fc>] (really_probe+0x80/0x214) [<c01c82fc>] (really_probe) from [<c01c857c>] (__driver_attach+0x98/0x9c) [<c01c857c>] (__driver_attach) from [<c01c69f4>] (bus_for_each_dev+0x60/0x94) [<c01c69f4>] (bus_for_each_dev) from [<c01c7ba4>] (bus_add_driver+0x148/0x1f0) [<c01c7ba4>] (bus_add_driver) from [<c01c8bc0>] (driver_register+0x78/0xf8) [<c01c8bc0>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a07f4>] (kernel_init+0x8/0xf0) [<c03a07f4>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 8db1532a6b907c23 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc2-00372-g8ba7451 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a4fec>] (dump_stack+0x80/0x90) [<c03a4fec>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000094a 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.05 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

mainline boot: 35 pass, 2 fail (v3.14-rc2-366-gc1b8ae0)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc2-366-gc1b8ae0 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 5.5 sec omap4-panda PASS: 1 min 11.0 sec am335x-bone PASS: 0 min 27.4 sec omap5-uevm PASS: 1 min 3.5 sec omap4-panda-es PASS: 1 min 15.5 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 42.7 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.8 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 14.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.2 sec sun4i-a10-cubieboard PASS: 0 min 17.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 21.1 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 54.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 55.1 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 25.4 sec sun4i-a10-cubieboard PASS: 0 min 18.8 sec bcm28155-ap PASS: 1 min 14.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 26.1 sec omap5-uevm PASS: 1 min 42.8 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 59.0 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.3 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ [ 0.434406] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.455659] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.188844] console [ttyS0] enabled [ 1.212839] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222061] Serial: IMX driver [ 1.225334] STMicroelectronics ASC driver initialized [ 1.230757] serial: Freescale lpuart driver [ 1.235046] [drm] Initialized drm 1.1.0 20060810 [ 1.242652] loop: module loaded [ 1.246266] sata_mv d00a0000.sata: version 1.28 [ 1.250891] sata_mv d00a0000.sata: unable to find phy [ 1.255964] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264093] pgd = c0004000 [ 1.266815] [00000054] *pgd=00000000 [ 1.270412] Internal error: Oops: 5 [#1] SMP ARM [ 1.275039] Modules linked in: [ 1.278113] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00366-gc1b8ae0 #1 [ 1.285702] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291124] PC is at __clk_put+0x1c/0x8c [ 1.295058] LR is at clk_prepare_lock+0x10/0xfc [ 1.299600] pc : [<c0494840>] lr : [<c0491eec>] psr: 60000113 [ 1.299600] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311106] r10: ed399b90 r9 : ed0d3c00 r8 : 00000004 [ 1.316343] r7 : ffffffed r6 : 00000000 r5 : ed1530d0 r4 : 00000000 [ 1.322887] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.329430] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.336756] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.342515] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.348536] Stack: (0xed059e10 to 0xed05a000) [ 1.352905] 9e00: 00000001 c0361960 c085c730 000000df [ 1.361105] 9e20: ed0ce1b0 00000002 c0609db4 00000000 74726f70 ed0c0030 00000001 ed3a1990 [ 1.369305] 9e40: 000000df ed0d3c10 c091eb38 00000000 c091eb38 c085c730 000000df ed058030 [ 1.377504] 9e60: 00000000 c0304e3c c0304e24 ed0d3c10 c0987d8c c0303698 00000000 ed0d3c10 [ 1.385704] 9e80: c091eb38 ed0d3c44 00000000 c0303884 00000000 c091eb38 c03037f8 c0301cb0 [ 1.393905] 9ea0: ed03b85c ed09a934 c091eb38 ed399b00 c0918ef8 c0302e60 c0777f84 c094d7c0 [ 1.402105] 9ec0: c091eb38 c091eb38 00000006 c094d7c0 c094d7c0 c0303e88 00000000 c08a11ac [ 1.410304] 9ee0: 00000006 c085c760 c08a11ac c0008bbc ed003c00 c072c6b4 ed0c7380 c05a5da0 [ 1.418504] 9f00: 00000000 c094d7c0 c082350c c012dd0c 00000000 c08e83d8 60000113 00000001 [ 1.426704] 9f20: ee7ffe1b c05b5578 000000df c005d48c c07ed5f4 00000006 ee7ffe26 00000006 [ 1.434904] 9f40: c08e83c8 c08a11ac 00000006 c094d7c0 c094d7c0 c082350c 000000df c08838dc [ 1.443104] 9f60: c08838d0 c0823c48 00000006 00000006 c082350c 88855891 15413389 b850a414 [ 1.451304] 9f80: 05a48542 00000000 c0594fd4 00000000 00000000 00000000 00000000 00000000 [ 1.459503] 9fa0: 00000000 c0594fdc 00000000 c000e5b8 00000000 00000000 00000000 00000000 [ 1.467703] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.475902] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c9451725 254484d0 [ 1.484111] [<c0494840>] (__clk_put) from [<c0361960>] (mv_platform_probe+0x2c0/0x43c) [ 1.492055] [<c0361960>] (mv_platform_probe) from [<c0304e3c>] (platform_drv_probe+0x18/0x48) [ 1.500605] [<c0304e3c>] (platform_drv_probe) from [<c0303698>] (driver_probe_device+0x124/0x240) [ 1.509503] [<c0303698>] (driver_probe_device) from [<c0303884>] (__driver_attach+0x8c/0x90) [ 1.517965] [<c0303884>] (__driver_attach) from [<c0301cb0>] (bus_for_each_dev+0x60/0x94) [ 1.526165] [<c0301cb0>] (bus_for_each_dev) from [<c0302e60>] (bus_add_driver+0x148/0x1f0) [ 1.534452] [<c0302e60>] (bus_add_driver) from [<c0303e88>] (driver_register+0x78/0xf8) [ 1.542481] [<c0303e88>] (driver_register) from [<c085c760>] (mv_init+0x30/0x50) [ 1.549899] [<c085c760>] (mv_init) from [<c0008bbc>] (do_one_initcall+0xf8/0x144) [ 1.557407] [<c0008bbc>] (do_one_initcall) from [<c0823c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566133] [<c0823c48>] (kernel_init_freeable) from [<c0594fdc>] (kernel_init+0x8/0xf0) [ 1.574250] [<c0594fdc>] (kernel_init) from [<c000e5b8>] (ret_from_fork+0x14/0x3c) [ 1.581841] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.587982] ---[ end trace 59fa7d8773b987e9 ]--- [ 1.592621] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.592621] [ 1.601781] CPU0: stopping [ 1.604498] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc2-00366-gc1b8ae0 #1 [ 1.613056] [<c001588c>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 1.620826] [<c001143c>] (show_stack) from [<c059ab48>] (dump_stack+0x84/0x94) [ 1.628070] [<c059ab48>] (dump_stack) from [<c0014160>] (handle_IPI+0x148/0x174) [ 1.635487] [<c0014160>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x110) [ 1.644037] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x50) [ 1.652407] Exception stack(0xc08a5f68 to 0xc08a5fb0) [ 1.657473] 5f60: ffffffed 2d734000 c08ad4e4 00000000 c08ac4cc c08a4000 [ 1.665673] 5f80: c08ac450 c094d64b c05a5128 c08a4000 c094d64b c08a4000 00000000 c08a5fb0 [ 1.673871] 5fa0: c000f158 c0081194 60000113 ffffffff [ 1.678941] [<c0011fc0>] (__irq_svc) from [<c0081194>] (cpu_startup_entry+0x100/0x144) [ 1.686884] [<c0081194>] (cpu_startup_entry) from [<c0823b00>] (start_kernel+0x358/0x364) [ 1.695083] [<c0823b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 25.43 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00366-gc1b8ae0 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c93a4>] lr : [<c02c6a50>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee390290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff878 ee910e10 c00ffa20 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee399ca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9b74 c01c9b5c c0551d88 ee90b210 c01c82fc 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c857c 00000000 c0519090 c01c84e4 c01c69f4 dea0: ee85a7dc ee85e1b4 c0519090 ee390300 c05180c0 c01c7ba4 c046c538 c052edc0 dec0: c0519090 c0519090 00000006 c052edc0 c052edc0 c01c8bc0 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000065 00000042 ef7fce00 c03bd7e0 df00: 00000000 ef7fce08 c04544f0 00000000 00000058 c04ad280 00000063 ee83df30 df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd10 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052edc0 c052edc0 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d45efc5d 0fbbed6f 47affddf df80: fbff7bce 00000000 c03a07ec 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a07f4 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd7b [<c02c93a4>] (__clk_put) from [<c01ff878>] (mv_platform_probe+0x2ac/0x414) [<c01ff878>] (mv_platform_probe) from [<c01c9b74>] (platform_drv_probe+0x18/0x48) [<c01c9b74>] (platform_drv_probe) from [<c01c82fc>] (really_probe+0x80/0x214) [<c01c82fc>] (really_probe) from [<c01c857c>] (__driver_attach+0x98/0x9c) [<c01c857c>] (__driver_attach) from [<c01c69f4>] (bus_for_each_dev+0x60/0x94) [<c01c69f4>] (bus_for_each_dev) from [<c01c7ba4>] (bus_add_driver+0x148/0x1f0) [<c01c7ba4>] (bus_add_driver) from [<c01c8bc0>] (driver_register+0x78/0xf8) [<c01c8bc0>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a07f4>] (kernel_init+0x8/0xf0) [<c03a07f4>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace e7e0b0d7baf22484 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc2-00366-gc1b8ae0 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a4fec>] (dump_stack+0x80/0x90) [<c03a4fec>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000094e 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.28 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

[PATCH v9 0/1] hibernation related patches

by Sebastian Capella

Patchset related to hibernation resume: - enhancement to make the use of an existing resume file more general Patch is based on the 3.13 tag. This was tested on a Beaglebone black with partial hibernation support, also compiled for x86_64. [PATCH v9 1/1] PM / Hibernate: use name_to_dev_t to parse resume kernel/power/hibernate.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) Use name_to_dev_t to parse the /sys/power/resume file making the syntax more flexible. It supports the previous use syntax and additionally can support other formats such as /dev/devicenode and UUID= formats. By changing /sys/debug/resume to accept the same syntax as the resume=device parameter, we can parse the resume=device in the initrd init script and use the resume device directly from the kernel command line. Changes in v9: -------------- * Dropped util changes based on feedback * Reverted to special newline handling in resume_store Changes in v8: -------------- * Dropped cleanup checkpatch warnings in hibernate.c file * Review comments for more compact checking in hibernate.c Changes in v7: -------------- * Switch to trim only one trailing newline if present using kstrdup_trimnl * remove kstrimdup patch * add kstrdup_trimnl patch * Add clean up patch for kernel/power/hibernate.c checkpatch warnings Changes in v6: -------------- * Revert tricky / confusing while loop indexing Changes in v5: -------------- * Change kstrimdup to minimize allocated memory. Now allocates only the memory needed for the string instead of using strim. Changes in v4: -------------- * Dropped name_to_dev_t rework in favor of adding kstrimdup * adjusted resume_store Changes in v3: -------------- * Dropped documentation patch as it went in through trivial * Added patch for name_to_dev_t to support directly parsing userspace buffer Changes in v2: -------------- * Added check for null return of kstrndup in hibernate.c Thanks, Sebastian

11 years, 3 months

1
2
0 0

queue boot: 32 pass, 1 fail (v3.12.10-98-ga07e5b4)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.10-98-ga07e5b4 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.8 sec omap3-beagle-xm PASS: 0 min 56.3 sec omap4-panda PASS: 1 min 6.6 sec omap3-tobi PASS: 0 min 22.3 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda-es PASS: 1 min 3.8 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec imx6q-wandboard PASS: 0 min 16.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.3 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.5 sec tegra30-beaver PASS: 0 min 16.4 sec am335x-boneblack PASS: 0 min 32.2 sec omap3-beagle-xm PASS: 1 min 1.2 sec sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 4.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 18.3 sec bcm28155-ap PASS: 1 min 8.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.1 sec omap3-tobi PASS: 0 min 20.1 sec am335x-bone PASS: 0 min 34.0 sec imx6q-wandboard PASS: 0 min 16.3 sec omap4-panda-es PASS: 0 min 58.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox FAIL: 0 min 27.8 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>>if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to address 192.168.1.183 Marvell>> setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Marvell>> if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-09u_Z7/tmpqsPlbq-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-09u_Z7/tmpqsPlbq-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-09u_Z7/tmpqsPlbq-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################### done Bytes transferred = 2653277 (287c5d hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-11 9:20:44 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2653213 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.76 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

3
2
0 0

next boot: 37 pass, 0 fail (next-20140214)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140214 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 26.4 sec omap3-beagle-xm PASS: 1 min 0.6 sec omap4-panda PASS: 1 min 9.7 sec omap3-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 28.1 sec omap5-uevm PASS: 1 min 2.8 sec omap4-panda-es PASS: 1 min 8.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 41.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 24.3 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.2 sec imx6q-wandboard PASS: 0 min 17.4 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec sun4i-a10-cubieboard PASS: 0 min 17.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.6 sec tegra30-beaver PASS: 0 min 20.1 sec am335x-boneblack PASS: 0 min 24.0 sec omap3-beagle-xm PASS: 0 min 50.8 sec sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 53.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 56.5 sec sun4i-a10-cubieboard PASS: 0 min 21.2 sec bcm28155-ap PASS: 1 min 4.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec omap3-tobi PASS: 0 min 22.3 sec am335x-bone PASS: 0 min 26.6 sec omap5-uevm PASS: 1 min 43.0 sec imx6q-wandboard PASS: 0 min 17.2 sec omap4-panda-es PASS: 0 min 52.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.8 sec

11 years, 3 months

1
0
0 0

queue boot: 12 pass, 0 fail (v3.10.30)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.30 Full Report =========== omap2plus_defconfig ------------------- am335x-bone PASS: 0 min 26.6 sec omap4-panda-es PASS: 1 min 3.0 sec omap3-beagle-xm PASS: 0 min 58.0 sec omap3-tobi PASS: 0 min 33.8 sec omap4-panda PASS: 1 min 10.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.6 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.5 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec

11 years, 3 months

1
0
0 0

queue boot: 32 pass, 1 fail (v3.12.11)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.11 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 2.3 sec omap4-panda PASS: 1 min 5.6 sec omap3-tobi PASS: 0 min 22.6 sec am335x-bone PASS: 0 min 27.3 sec omap4-panda-es PASS: 1 min 6.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.2 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 16.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.7 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.6 sec tegra30-beaver PASS: 0 min 16.7 sec am335x-boneblack PASS: 0 min 32.3 sec omap3-beagle-xm PASS: 1 min 2.2 sec sun7i-a20-cubieboard2 PASS: 0 min 13.4 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 4.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 18.3 sec bcm28155-ap PASS: 1 min 7.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.4 sec omap3-tobi PASS: 0 min 20.4 sec am335x-bone PASS: 0 min 33.9 sec imx6q-wandboard PASS: 0 min 19.0 sec omap4-panda-es PASS: 1 min 5.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 19.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 35.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox FAIL: 0 min 28.0 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>version > version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>>setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>if test -n ${initenv}; then run initenv; fi > if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to address 192.168.1.183 Marvell>>setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Marvell>if test -n ${netargs}; then run netargs; fi > if test -n ${netargs}; then run netargs; fi Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-BtuyJy/tmpd9aTzj-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-BtuyJy/tmpd9aTzj-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-BtuyJy/tmpd9aTzj-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################### done Bytes transferred = 2653637 (287dc5 hex) Marvell>tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot > tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-14 5:20:37 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2653573 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.00 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

[PATCH 1/2] PPC: powernv: remove redundant cpuidle_idle_call()

by Nicolas Pitre

The core idle loop now takes care of it. Signed-off-by: Nicolas Pitre <nico(a)linaro.org> --- arch/powerpc/platforms/powernv/setup.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 21166f65c9..a932feb290 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -26,7 +26,6 @@ #include <linux/of_fdt.h> #include <linux/interrupt.h> #include <linux/bug.h> -#include <linux/cpuidle.h> #include <asm/machdep.h> #include <asm/firmware.h> @@ -217,16 +216,6 @@ static int __init pnv_probe(void) return 1; } -void powernv_idle(void) -{ - /* Hook to cpuidle framework if available, else - * call on default platform idle code - */ - if (cpuidle_idle_call()) { - power7_idle(); - } -} - define_machine(powernv) { .name = "PowerNV", .probe = pnv_probe, @@ -236,7 +225,7 @@ define_machine(powernv) { .show_cpuinfo = pnv_show_cpuinfo, .progress = pnv_progress, .machine_shutdown = pnv_shutdown, - .power_save = powernv_idle, + .power_save = power7_idle, .calibrate_decr = generic_calibrate_decr, #ifdef CONFIG_KEXEC .kexec_cpu_down = pnv_kexec_cpu_down, -- 1.8.4.108.g55ea5f6

11 years, 3 months

7
21
0 0

queue boot: 35 pass, 0 fail (v3.13.3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.13.3 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 26.3 sec omap3-beagle-xm PASS: 1 min 2.7 sec omap4-panda PASS: 1 min 10.8 sec omap3-tobi PASS: 0 min 22.8 sec am335x-bone PASS: 0 min 27.6 sec omap4-panda-es PASS: 1 min 13.9 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.3 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.1 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.9 sec sun4i-a10-cubieboard PASS: 0 min 17.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 32.6 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 22.9 sec omap3-beagle-xm PASS: 0 min 59.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 3.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 18.4 sec bcm28155-ap PASS: 1 min 4.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec omap3-tobi PASS: 0 min 21.1 sec am335x-bone PASS: 0 min 24.5 sec imx6q-wandboard PASS: 0 min 16.8 sec omap4-panda-es PASS: 1 min 3.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 21.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 20.8 sec armada-370-mirabox PASS: 0 min 17.0 sec

11 years, 3 months

1
0
0 0

[PATCH] MAINTAINERS: Add entry for Cirrus CODEC drivers

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> I noticed that some recent patches hadn't been CCed to the Cirrus people - add an entry in MAINTAINERS to help make that happen. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- Brian, Paul - are you OK with this? MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index b97ce2594f16..5ef6c0277075 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2200,6 +2200,13 @@ L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) S: Odd Fixes F: sound/soc/codecs/cs4270* +CIRRUS LOGIC AUDIO CODEC DRIVERS +M: Brian Austin <brian.austin(a)cirrus.com> +M: Paul Handrigan <Paul.Handrigan(a)cirrus.com> +L: alsa-devel(a)alsa-project.org (moderated for non-subscribers) +S: Maintained +F: sound/soc/codecs/cs* + CLEANCACHE API M: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> L: linux-kernel(a)vger.kernel.org -- 1.9.rc1

11 years, 3 months

5
9
0 0

[PATCH] ARM: OMAP4: sleep: byteswap data for big-endian

by Taras Kondratiuk

From: Victor Kamensky <victor.kamensky(a)linaro.org> Assembler functions defined in sleep44xx.S need to byteswap values after read / before write from h/w register if code compiled in big endian mode. Simple change to do 'rev x, x' before str instruction and after ldr instruction that deals with h/w registers. Signed-off-by: Victor Kamensky <victor.kamensky(a)linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk(a)linaro.org> --- This is a part of RFC series [1]. Based on v3.13-rc8. [1] http://www.spinics.net/lists/linux-omap/msg99927.html arch/arm/mach-omap2/sleep44xx.S | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9086ce0..8017016 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <asm/smp_scu.h> #include <asm/memory.h> +#include <asm/assembler.h> #include <asm/hardware/cache-l2x0.h> #include "omap-secure.h" @@ -74,6 +75,7 @@ ENTRY(omap4_finish_suspend) */ bl omap4_get_sar_ram_base ldr r9, [r0, #OMAP_TYPE_OFFSET] +ARM_BE8(rev r9, r9) cmp r9, #0x1 @ Check for HS device bne skip_secure_l1_clean mov r0, #SCU_PM_NORMAL @@ -113,12 +115,14 @@ skip_secure_l1_clean: bl omap4_get_sar_ram_base mov r8, r0 ldr r9, [r8, #OMAP_TYPE_OFFSET] +ARM_BE8(rev r9, r9) cmp r9, #0x1 @ Check for HS device bne scu_gp_set mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR ands r0, r0, #0x0f ldreq r0, [r8, #SCU_OFFSET0] ldrne r0, [r8, #SCU_OFFSET1] +ARM_BE8(rev r0, r0) mov r1, #0x00 stmfd r13!, {r4-r12, r14} ldr r12, =OMAP4_MON_SCU_PWR_INDEX @@ -130,6 +134,7 @@ scu_gp_set: ands r0, r0, #0x0f ldreq r1, [r8, #SCU_OFFSET0] ldrne r1, [r8, #SCU_OFFSET1] +ARM_BE8(rev r1, r1) bl omap4_get_scu_base bl scu_power_mode skip_scu_gp_set: @@ -157,6 +162,7 @@ skip_scu_gp_set: ands r5, r5, #0x0f ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory. +ARM_BE8(rev r0, r0) cmp r0, #3 bne do_WFI #ifdef CONFIG_PL310_ERRATA_727915 @@ -167,9 +173,11 @@ skip_scu_gp_set: bl omap4_get_l2cache_base mov r2, r0 ldr r0, =0xffff +ARM_BE8(rev r0, r0) str r0, [r2, #L2X0_CLEAN_INV_WAY] wait: ldr r0, [r2, #L2X0_CLEAN_INV_WAY] +ARM_BE8(rev r0, r0) ldr r1, =0xffff ands r0, r0, r1 bne wait @@ -182,9 +190,11 @@ l2x_sync: bl omap4_get_l2cache_base mov r2, r0 mov r0, #0x0 +ARM_BE8(rev r0, r0) str r0, [r2, #L2X0_CACHE_SYNC] sync: ldr r0, [r2, #L2X0_CACHE_SYNC] +ARM_BE8(rev r0, r0) ands r0, r0, #0x1 bne sync #endif @@ -216,6 +226,7 @@ do_WFI: bl omap4_get_sar_ram_base mov r8, r0 ldr r9, [r8, #OMAP_TYPE_OFFSET] +ARM_BE8(rev r9, r9) cmp r9, #0x1 @ Check for HS device bne scu_gp_clear mov r0, #SCU_PM_NORMAL @@ -258,6 +269,7 @@ ENTRY(omap4_cpu_resume) */ ldr r8, =OMAP44XX_SAR_RAM_BASE ldr r9, [r8, #OMAP_TYPE_OFFSET] +ARM_BE8(rev r9, r9) cmp r9, #0x1 @ Skip if GP device bne skip_ns_smp_enable mrc p15, 0, r0, c0, c0, 5 @@ -292,16 +304,19 @@ skip_ns_smp_enable: */ ldr r2, =OMAP44XX_L2CACHE_BASE ldr r0, [r2, #L2X0_CTRL] +ARM_BE8(rev r0, r0) and r0, #0x0f cmp r0, #1 beq skip_l2en @ Skip if already enabled ldr r3, =OMAP44XX_SAR_RAM_BASE ldr r1, [r3, #OMAP_TYPE_OFFSET] +ARM_BE8(rev r1, r1) cmp r1, #0x1 @ Check for HS device bne set_gp_por ldr r0, =OMAP4_PPA_L2_POR_INDEX ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] +ARM_BE8(rev r4, r4) adr r3, ppa_por_params str r4, [r3, #0x04] mov r1, #0x0 @ Process ID @@ -313,11 +328,13 @@ skip_ns_smp_enable: set_gp_por: ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET] +ARM_BE8(rev r0, r0) ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH DO_SMC set_aux_ctrl: ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r0, [r1, #L2X0_AUXCTRL_OFFSET] +ARM_BE8(rev r0, r0) ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL DO_SMC mov r0, #0x1 -- 1.7.9.5

11 years, 3 months

5
12
0 0

[PATCH] perf: ARM64: wire up perf_regs and unwind support

by Jean Pihet

This patch hooks in the perf_regs and libunwind code for ARM64. The tools/perf/arch/arm64 is created; it contains the arch specific code for DWARF unwinding. Signed-off-by: Jean Pihet <jean.pihet(a)linaro.org> Acked-by: Will Deacon <will.deacon(a)arm.com> --- tools/perf/arch/arm64/Makefile | 7 +++ tools/perf/arch/arm64/include/perf_regs.h | 88 +++++++++++++++++++++++++++++++ tools/perf/arch/arm64/util/dwarf-regs.c | 80 ++++++++++++++++++++++++++++ tools/perf/arch/arm64/util/unwind.c | 82 ++++++++++++++++++++++++++++ tools/perf/config/Makefile | 8 ++- 5 files changed, 264 insertions(+), 1 deletion(-) create mode 100644 tools/perf/arch/arm64/Makefile create mode 100644 tools/perf/arch/arm64/include/perf_regs.h create mode 100644 tools/perf/arch/arm64/util/dwarf-regs.c create mode 100644 tools/perf/arch/arm64/util/unwind.c diff --git a/tools/perf/arch/arm64/Makefile b/tools/perf/arch/arm64/Makefile new file mode 100644 index 0000000..fe9b61e --- /dev/null +++ b/tools/perf/arch/arm64/Makefile @@ -0,0 +1,7 @@ +ifndef NO_DWARF +PERF_HAVE_DWARF_REGS := 1 +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o +endif +ifndef NO_LIBUNWIND +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/unwind.o +endif diff --git a/tools/perf/arch/arm64/include/perf_regs.h b/tools/perf/arch/arm64/include/perf_regs.h new file mode 100644 index 0000000..2359546 --- /dev/null +++ b/tools/perf/arch/arm64/include/perf_regs.h @@ -0,0 +1,88 @@ +#ifndef ARCH_PERF_REGS_H +#define ARCH_PERF_REGS_H + +#include <stdlib.h> +#include "../../util/types.h" +#include <asm/perf_regs.h> + +#define PERF_REGS_MASK ((1ULL << PERF_REG_ARM64_MAX) - 1) +#define PERF_REG_IP PERF_REG_ARM64_PC +#define PERF_REG_SP PERF_REG_ARM64_SP + +static inline const char *perf_reg_name(int id) +{ + switch (id) { + case PERF_REG_ARM64_X0: + return "x0"; + case PERF_REG_ARM64_X1: + return "x1"; + case PERF_REG_ARM64_X2: + return "x2"; + case PERF_REG_ARM64_X3: + return "x3"; + case PERF_REG_ARM64_X4: + return "x4"; + case PERF_REG_ARM64_X5: + return "x5"; + case PERF_REG_ARM64_X6: + return "x6"; + case PERF_REG_ARM64_X7: + return "x7"; + case PERF_REG_ARM64_X8: + return "x8"; + case PERF_REG_ARM64_X9: + return "x9"; + case PERF_REG_ARM64_X10: + return "x10"; + case PERF_REG_ARM64_X11: + return "x11"; + case PERF_REG_ARM64_X12: + return "x12"; + case PERF_REG_ARM64_X13: + return "x13"; + case PERF_REG_ARM64_X14: + return "x14"; + case PERF_REG_ARM64_X15: + return "x15"; + case PERF_REG_ARM64_X16: + return "x16"; + case PERF_REG_ARM64_X17: + return "x17"; + case PERF_REG_ARM64_X18: + return "x18"; + case PERF_REG_ARM64_X19: + return "x19"; + case PERF_REG_ARM64_X20: + return "x20"; + case PERF_REG_ARM64_X21: + return "x21"; + case PERF_REG_ARM64_X22: + return "x22"; + case PERF_REG_ARM64_X23: + return "x23"; + case PERF_REG_ARM64_X24: + return "x24"; + case PERF_REG_ARM64_X25: + return "x25"; + case PERF_REG_ARM64_X26: + return "x26"; + case PERF_REG_ARM64_X27: + return "x27"; + case PERF_REG_ARM64_X28: + return "x28"; + case PERF_REG_ARM64_X29: + return "x29"; + case PERF_REG_ARM64_SP: + return "sp"; + case PERF_REG_ARM64_LR: + return "lr"; + case PERF_REG_ARM64_PC: + return "pc"; + default: + return NULL; + } + + return NULL; +} + +#endif /* ARCH_PERF_REGS_H */ diff --git a/tools/perf/arch/arm64/util/dwarf-regs.c b/tools/perf/arch/arm64/util/dwarf-regs.c new file mode 100644 index 0000000..d49efeb --- /dev/null +++ b/tools/perf/arch/arm64/util/dwarf-regs.c @@ -0,0 +1,80 @@ +/* + * Mapping of DWARF debug register numbers into register names. + * + * Copyright (C) 2010 Will Deacon, ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <stddef.h> +#include <dwarf-regs.h> + +struct pt_regs_dwarfnum { + const char *name; + unsigned int dwarfnum; +}; + +#define STR(s) #s +#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num} +#define GPR_DWARFNUM_NAME(num) \ + {.name = STR(%x##num), .dwarfnum = num} +#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0} + +/* + * Reference: + * http://infocenter.arm.com/help/topic/com.arm.doc.ihi0057b/IHI0057B_aadwarf6… + */ +static const struct pt_regs_dwarfnum regdwarfnum_table[] = { + GPR_DWARFNUM_NAME(0), + GPR_DWARFNUM_NAME(1), + GPR_DWARFNUM_NAME(2), + GPR_DWARFNUM_NAME(3), + GPR_DWARFNUM_NAME(4), + GPR_DWARFNUM_NAME(5), + GPR_DWARFNUM_NAME(6), + GPR_DWARFNUM_NAME(7), + GPR_DWARFNUM_NAME(8), + GPR_DWARFNUM_NAME(9), + GPR_DWARFNUM_NAME(10), + GPR_DWARFNUM_NAME(11), + GPR_DWARFNUM_NAME(12), + GPR_DWARFNUM_NAME(13), + GPR_DWARFNUM_NAME(14), + GPR_DWARFNUM_NAME(15), + GPR_DWARFNUM_NAME(16), + GPR_DWARFNUM_NAME(17), + GPR_DWARFNUM_NAME(18), + GPR_DWARFNUM_NAME(19), + GPR_DWARFNUM_NAME(20), + GPR_DWARFNUM_NAME(21), + GPR_DWARFNUM_NAME(22), + GPR_DWARFNUM_NAME(23), + GPR_DWARFNUM_NAME(24), + GPR_DWARFNUM_NAME(25), + GPR_DWARFNUM_NAME(26), + GPR_DWARFNUM_NAME(27), + GPR_DWARFNUM_NAME(28), + GPR_DWARFNUM_NAME(29), + REG_DWARFNUM_NAME("%lr", 30), + REG_DWARFNUM_NAME("%sp", 31), + REG_DWARFNUM_END, +}; + +/** + * get_arch_regstr() - lookup register name from it's DWARF register number + * @n: the DWARF register number + * + * get_arch_regstr() returns the name of the register in struct + * regdwarfnum_table from it's DWARF register number. If the register is not + * found in the table, this returns NULL; + */ +const char *get_arch_regstr(unsigned int n) +{ + const struct pt_regs_dwarfnum *roff; + for (roff = regdwarfnum_table; roff->name != NULL; roff++) + if (roff->dwarfnum == n) + return roff->name; + return NULL; +} diff --git a/tools/perf/arch/arm64/util/unwind.c b/tools/perf/arch/arm64/util/unwind.c new file mode 100644 index 0000000..8d37a4c --- /dev/null +++ b/tools/perf/arch/arm64/util/unwind.c @@ -0,0 +1,82 @@ + +#include <errno.h> +#include <libunwind.h> +#include "perf_regs.h" +#include "../../util/unwind.h" + +int unwind__arch_reg_id(int regnum) +{ + switch (regnum) { + case UNW_AARCH64_X0: + return PERF_REG_ARM64_X0; + case UNW_AARCH64_X1: + return PERF_REG_ARM64_X1; + case UNW_AARCH64_X2: + return PERF_REG_ARM64_X2; + case UNW_AARCH64_X3: + return PERF_REG_ARM64_X3; + case UNW_AARCH64_X4: + return PERF_REG_ARM64_X4; + case UNW_AARCH64_X5: + return PERF_REG_ARM64_X5; + case UNW_AARCH64_X6: + return PERF_REG_ARM64_X6; + case UNW_AARCH64_X7: + return PERF_REG_ARM64_X7; + case UNW_AARCH64_X8: + return PERF_REG_ARM64_X8; + case UNW_AARCH64_X9: + return PERF_REG_ARM64_X9; + case UNW_AARCH64_X10: + return PERF_REG_ARM64_X10; + case UNW_AARCH64_X11: + return PERF_REG_ARM64_X11; + case UNW_AARCH64_X12: + return PERF_REG_ARM64_X12; + case UNW_AARCH64_X13: + return PERF_REG_ARM64_X13; + case UNW_AARCH64_X14: + return PERF_REG_ARM64_X14; + case UNW_AARCH64_X15: + return PERF_REG_ARM64_X15; + case UNW_AARCH64_X16: + return PERF_REG_ARM64_X16; + case UNW_AARCH64_X17: + return PERF_REG_ARM64_X17; + case UNW_AARCH64_X18: + return PERF_REG_ARM64_X18; + case UNW_AARCH64_X19: + return PERF_REG_ARM64_X19; + case UNW_AARCH64_X20: + return PERF_REG_ARM64_X20; + case UNW_AARCH64_X21: + return PERF_REG_ARM64_X21; + case UNW_AARCH64_X22: + return PERF_REG_ARM64_X22; + case UNW_AARCH64_X23: + return PERF_REG_ARM64_X23; + case UNW_AARCH64_X24: + return PERF_REG_ARM64_X24; + case UNW_AARCH64_X25: + return PERF_REG_ARM64_X25; + case UNW_AARCH64_X26: + return PERF_REG_ARM64_X26; + case UNW_AARCH64_X27: + return PERF_REG_ARM64_X27; + case UNW_AARCH64_X28: + return PERF_REG_ARM64_X28; + case UNW_AARCH64_X29: + return PERF_REG_ARM64_X29; + case UNW_AARCH64_X30: + return PERF_REG_ARM64_LR; + case UNW_AARCH64_SP: + return PERF_REG_ARM64_SP; + case UNW_AARCH64_PC: + return PERF_REG_ARM64_PC; + default: + pr_err("unwind: invalid reg id %d\n", regnum); + return -EINVAL; + } + + return -EINVAL; +} diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile index c48d449..5c0a6ed 100644 --- a/tools/perf/config/Makefile +++ b/tools/perf/config/Makefile @@ -29,11 +29,17 @@ ifeq ($(ARCH),x86) endif NO_PERF_REGS := 0 endif + ifeq ($(ARCH),arm) NO_PERF_REGS := 0 LIBUNWIND_LIBS = -lunwind -lunwind-arm endif +ifeq ($(ARCH),arm64) + NO_PERF_REGS := 0 + LIBUNWIND_LIBS = -lunwind -lunwind-aarch64 +endif + ifeq ($(LIBUNWIND_LIBS),) NO_LIBUNWIND := 1 else @@ -327,7 +333,7 @@ ifndef NO_LIBUNWIND msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1); NO_LIBUNWIND := 1 else - ifeq ($(ARCH),arm) + ifeq ($(ARCH),$(filter $(ARCH),arm arm64)) $(call feature_check,libunwind-debug-frame) ifneq ($(feature-libunwind-debug-frame), 1) msg := $(warning No debug_frame support found in libunwind); -- 1.7.11.7

11 years, 3 months

5
7
0 0

[PATCH] [RFC] Support for creating generic host_bridge from device tree

by Liviu Dudau

Following the discussion started here [1], I now have a proposal for tackling generic support for host bridges described via device tree. It is an initial stab at it, to try to get feedback and suggestions, but it is functional enough that I have PCI Express for arm64 working on an FPGA using the patch that I am also publishing that adds support for PCI for that platform. Looking at the existing architectures that fit the requirements (use of device tree and PCI) yields the powerpc and microblaze as generic enough to make them candidates for conversion. I have a tentative patch for microblaze that I can only compile test it, unfortunately using qemu-microblaze leads to an early crash in the kernel. As Bjorn has mentioned in the previous discussion, the idea is to add to struct pci_host_bridge enough data to be able to reduce the size or remove the architecture specific pci_controller structure. arm64 support actually manages to get rid of all the architecture static data and has no pci_controller structure defined. For host bridge drivers that means a change of API unless architectures decide to provide a compatibility layer (comments here please). In order to initialise a host bridge with the new API, the following example code is sufficient for a _probe() function: static int myhostbridge_probe(struct platform_device *pdev) { int err; struct device_node *dev; struct pci_host_bridge *bridge; struct resource bus_range; struct myhostbridge_port *pp; LIST_HEAD(resources); dev = pdev->dev.of_node; if (!of_device_is_available(dev)) { pr_warn("%s: disabled\n", dev->full_name); return -ENODEV; } pp = kzalloc(sizeof(struct myhostbridge_port), GFP_KERNEL); if (!pp) return -ENOMEM; err = of_pci_parse_bus_range(dev, &bus_range); if (err) { bus_range.start = 0; bus_range.end = 255; bus_range.flags = IORESOURCE_BUS; } pci_add_resource(&resources, &bus_range); bridge = pci_host_bridge_of_init(&pdev->dev, 0, &myhostbridge_ops, pp, &resources); if (!bridge) { err = -EINVAL; goto bridge_init_fail; } err = myhostbridge_setup(bridge->bus); if (err) goto bridge_init_fail; /* * Add flags here, this is just an example */ pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0); pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC); bus_range.end = pci_scan_child_bus(bridge->bus); pci_bus_update_busn_res_end(bridge->bus, bus_range.end); pci_assign_unassigned_bus_resources(bridge->bus); pci_bus_add_devices(bridge->bus); return 0; bridge_init_fail: kfree(pp); pci_free_resource_list(&resources); return err; } Best regards, Liviu Dudau [1] http://thread.gmane.org/gmane.linux.kernel.pci/25946 Liviu Dudau (1): pci: Add support for creating a generic host_bridge from device tree drivers/pci/host-bridge.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/pci/probe.c | 11 ++++++ include/linux/pci.h | 14 ++++++++ 3 files changed, 117 insertions(+) -- 1.8.5.3

11 years, 3 months

5
22
0 0

[PATCH V2 0/3] sched: idle_balance() cleanup and fix

by Daniel Lezcano

Peter, this patchset replace the beginning of the previous mixed one which was not yet commited [1] without changes except a compilation error fix for UP kernel config. It is refreshed against tip/sched/core. As the UP config compilation is broken on the previous patchset, git bisect is no longer safe for it. You can apply this small serie and drop the 3 first patches of the previous series [1], or ignore it and I will bring the fix after you applied [1]. It cleanups the idle_balance function parameters by passing the struct rq only, fixes a race in the idle_balance function and finally move the idle_stamp from fair.c to core.c. I am aware it will return back to fair.c with Peter's pending patches but at least it changes the idle_balance() function to return true if a balance occured. [1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg577271.html Changelog: V2: * fixed compilation errors when CONFIG_SMP=n V1: initial post Daniel Lezcano (3): sched: Remove cpu parameter for idle_balance() sched: Fix race in idle_balance() sched: Move idle_stamp up to the core kernel/sched/core.c | 13 +++++++++++-- kernel/sched/fair.c | 20 +++++++++++++------- kernel/sched/sched.h | 8 +------- 3 files changed, 25 insertions(+), 16 deletions(-) -- 1.7.9.5

11 years, 3 months

4
14
0 0

Re: [RFC PATCH V2] ARM: EXYNOS: Fix hotplug when CPUs boot in HYP mode

by Viresh Kumar

Getting rid of mainline and getting Linaro list in.. On Tue, May 7, 2013 at 11:21 AM, <giridhar.maruthy(a)linaro.org> wrote: > From: Giridhar Maruthy <giridhar.maruthy(a)linaro.org> > > In intial boot-up, u-boot commit "3d28a181aab5e... arndale5250: Boot in Hyp > mode and enable architected timers" puts the CPUs in HYP mode. > > Hence, the CPUs need to be put in HYP mode when they are hot plugged out and > plugged in back. > > This patch is almost same as above u-boot patch, it additionally takes care > if the kernel is compiled with thumb-2 option. > > Signed-off-by: Giridhar Maruthy <giridhar.m(a)samsung.com> > Signed-off-by: Inderpal Singh <inderpal.singh(a)linaro.org> > --- > arch/arm/mach-exynos/headsmp.S | 114 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 114 insertions(+) I have been using this patch recently on mainline kernel and LNG kernel to get CPU hotplug working. Recently we saw crashes in LNG kernel even if this patch was in and found that this patch doesn't work well in case CONFIG_THUMB2_KERNEL is enabled in kernel. LNG kernels have that enabled by default.. [ 126.028362] IRQ153 no longer affine to CPU1 [ 126.028732] CPU1: shutdown [ 126.028771] Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP THUMB2 [ 126.028796] Modules linked in: [ 126.028846] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.9-00184-g0e7f8d5 #35 [ 126.028878] task: ef09e080 ti: ef0be000 task.ti: ef0be000 [ 126.028905] PC is at 0xc065e6ae [ 126.028958] LR is at exynos_cpu_die+0x4f/0xc4 [ 126.029014] pc : [<c065e6ae>] lr : [<c025b06f>] psr: 60070093 [ 126.029014] sp : ef0bffc8 ip : 00000001 fp : 00000000 [ 126.029043] r10: 00000000 r9 : 00000001 r8 : c03fc98f [ 126.029081] r7 : 00000000 r6 : f8182080 r5 : c03cfc60 r4 : c03cfa9c [ 126.029118] r3 : 02000002 r2 : 00000000 r1 : 701fe00a r0 : 00000001 [ 126.029151] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 126.029186] Control: 50c53879 Table: 4000406a DAC: 00000015 [ 126.029219] Process swapper/1 (pid: 0, stack limit = 0xef0be240) [ 126.029248] Stack: (0xef0bffc8 to 0xef0c0000) [ 126.029309] ffc0: 00000001 00000001 c02629a4 00000001 c03cc44c c02629a4 [ 126.029385] ffe0: c03fc98f c025aff7 ef0be000 c003e435 c03fccf8 400084c9 ffffffff ffffbfff [ 126.029505] [<c025b06f>] (exynos_cpu_die+0x4f/0xc4) from [<c025aff7>] (cpu_die+0x27/0x50) [ 126.029639] [<c025aff7>] (cpu_die+0x27/0x50) from [<c003e435>] (cpu_startup_entry+0xbd/0xe8) [ 126.029750] [<c003e435>] (cpu_startup_entry+0xbd/0xe8) from [<400084c9>] (0x400084c9) [ 126.029809] Code: 00000000 00005000 00000000 ffff0000 (0000ffff) [ 126.029838] ---[ end trace fbec164dd7bcae1c ]--- [ 126.029868] Kernel panic - not syncing: Attempted to kill the idle task! [ 126.173782] CPU0: stopping [ 126.176429] CPU: 0 PID: 1962 Comm: bash Tainted: G D 3.12.9-00184-g0e7f8d5 #35 [ 126.184394] [<c00110ad>] (unwind_backtrace+0x1/0x98) from [<c000ee53>] (show_stack+0xb/0xc) [ 126.192584] [<c000ee53>] (show_stack+0xb/0xc) from [<c025d613>] (dump_stack+0x4b/0x7c) [ 126.200354] [<c025d613>] (dump_stack+0x4b/0x7c) from [<c00107c3>] (handle_IPI+0xa3/0xc4) [ 126.208295] [<c00107c3>] (handle_IPI+0xa3/0xc4) from [<c000842d>] (gic_handle_irq+0x4d/0x54) [ 126.216582] [<c000842d>] (gic_handle_irq+0x4d/0x54) from [<c000f65b>] (__irq_svc+0x3b/0x80) [ 126.224775] Exception stack(0xee05fde8 to 0xee05fe30) [ 126.229727] fde0: 00000000 c1462390 ee05fe28 00000000 0000000e 00000001 [ 126.237759] fe00: c03d37ac c03ffb18 00000000 00000000 00000000 60070013 00000020 ee05fe30 [ 126.245785] fe20: c003cf41 c003d558 40070033 ffffffff [ 126.250748] [<c000f65b>] (__irq_svc+0x3b/0x80) from [<c003d558>] (vprintk_emit+0x158/0x370) [ 126.258947] [<c003d558>] (vprintk_emit+0x158/0x370) from [<c025bbdd>] (printk+0x21/0x2c) [ 126.266887] [<c025bbdd>] (printk+0x21/0x2c) from [<c00104e3>] (__cpu_die+0x1f/0x58) [ 126.274402] [<c00104e3>] (__cpu_die+0x1f/0x58) from [<c025b1f7>] (_cpu_down+0xa7/0x198) [ 126.282260] [<c025b1f7>] (_cpu_down+0xa7/0x198) from [<c025b2fd>] (cpu_down+0x15/0x28) [ 126.290036] [<c025b2fd>] (cpu_down+0x15/0x28) from [<c017571d>] (device_offline+0x4d/0x74) [ 126.298150] [<c017571d>] (device_offline+0x4d/0x74) from [<c01757c1>] (online_store+0x29/0x44) [ 126.306605] [<c01757c1>] (online_store+0x29/0x44) from [<c01741cb>] (dev_attr_store+0xb/0x14) [ 126.314978] [<c01741cb>] (dev_attr_store+0xb/0x14) from [<c00b64c5>] (sysfs_write_file+0xe5/0x10c) [ 126.323775] [<c00b64c5>] (sysfs_write_file+0xe5/0x10c) from [<c007c2b9>] (vfs_write+0x6d/0x104) [ 126.332312] [<c007c2b9>] (vfs_write+0x6d/0x104) from [<c007c53d>] (SyS_write+0x29/0x4c) [ 126.340170] [<c007c53d>] (SyS_write+0x29/0x4c) from [<c000cba1>] (ret_fast_syscall+0x1/0x46) Don't know why we need that for though (i.e. the config option).. -- viresh

11 years, 3 months

2
4
0 0

next boot: 37 pass, 0 fail (next-20140213)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140213 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 26.0 sec omap3-beagle-xm PASS: 1 min 0.5 sec omap4-panda PASS: 1 min 7.2 sec omap3-tobi PASS: 0 min 23.0 sec am335x-bone PASS: 0 min 27.7 sec omap5-uevm PASS: 1 min 1.8 sec omap4-panda-es PASS: 1 min 7.4 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 45.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.4 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.2 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec sun4i-a10-cubieboard PASS: 0 min 17.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.2 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.4 sec tegra30-beaver PASS: 0 min 23.0 sec am335x-boneblack PASS: 0 min 23.3 sec omap3-beagle-xm PASS: 0 min 47.1 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 53.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 55.9 sec sun4i-a10-cubieboard PASS: 0 min 19.0 sec bcm28155-ap PASS: 1 min 4.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.0 sec omap3-tobi PASS: 0 min 21.6 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 45.0 sec imx6q-wandboard PASS: 0 min 16.9 sec omap4-panda-es PASS: 0 min 59.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec

11 years, 3 months

1
0
0 0

mainline boot: 35 pass, 2 fail (v3.14-rc2-271-g4675348)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc2-271-g4675348 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.5 sec omap3-beagle-xm PASS: 0 min 58.8 sec omap4-panda PASS: 1 min 14.0 sec am335x-bone PASS: 0 min 27.4 sec omap5-uevm PASS: 1 min 0.2 sec omap4-panda-es PASS: 1 min 10.3 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 38.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.3 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 59.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec sun4i-a10-cubieboard PASS: 0 min 17.7 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.4 sec tegra30-beaver PASS: 0 min 20.0 sec am335x-boneblack PASS: 0 min 23.5 sec omap3-beagle-xm PASS: 0 min 51.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 0 min 58.2 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 19.1 sec bcm28155-ap PASS: 1 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.0 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 46.3 sec imx6q-wandboard PASS: 0 min 17.7 sec omap4-panda-es PASS: 0 min 51.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ [ 0.434624] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.455881] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.189051] console [ttyS0] enabled [ 1.213047] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222267] Serial: IMX driver [ 1.225538] STMicroelectronics ASC driver initialized [ 1.230959] serial: Freescale lpuart driver [ 1.235248] [drm] Initialized drm 1.1.0 20060810 [ 1.242863] loop: module loaded [ 1.246479] sata_mv d00a0000.sata: version 1.28 [ 1.251105] sata_mv d00a0000.sata: unable to find phy [ 1.256178] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264308] pgd = c0004000 [ 1.267031] [00000054] *pgd=00000000 [ 1.270629] Internal error: Oops: 5 [#1] SMP ARM [ 1.275255] Modules linked in: [ 1.278330] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00271-g4675348 #1 [ 1.285918] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291339] PC is at __clk_put+0x1c/0x8c [ 1.295273] LR is at clk_prepare_lock+0x10/0xfc [ 1.299815] pc : [<c0494858>] lr : [<c0491f04>] psr: 60000113 [ 1.299815] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311320] r10: ed399b90 r9 : ed0d3c00 r8 : 00000004 [ 1.316557] r7 : ffffffed r6 : 00000000 r5 : ed1530d0 r4 : 00000000 [ 1.323100] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.329643] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.336970] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.342729] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.348751] Stack: (0xed059e10 to 0xed05a000) [ 1.353119] 9e00: 00000001 c036197c c085c730 000000df [ 1.361318] 9e20: ed0ce1b0 00000002 c0609db4 00000000 74726f70 ed0c0030 00000001 ed3a1990 [ 1.369517] 9e40: 000000df ed0d3c10 c091eb38 00000000 c091eb38 c085c730 000000df ed058030 [ 1.377717] 9e60: 00000000 c0304e58 c0304e40 ed0d3c10 c0987d8c c03036b4 00000000 ed0d3c10 [ 1.385917] 9e80: c091eb38 ed0d3c44 00000000 c03038a0 00000000 c091eb38 c0303814 c0301ccc [ 1.394116] 9ea0: ed03b85c ed09a934 c091eb38 ed399b00 c0918ef8 c0302e7c c0777f08 c094d7c0 [ 1.402317] 9ec0: c091eb38 c091eb38 00000006 c094d7c0 c094d7c0 c0303ea4 00000000 c08a11ac [ 1.410516] 9ee0: 00000006 c085c760 c08a11ac c0008bbc ed003c00 c072c664 ed0c7380 c05a5da0 [ 1.418715] 9f00: 00000000 c094d7c0 c082350c c012dcb0 00000000 c08e83d8 60000113 00000001 [ 1.426915] 9f20: ee7ffe1b c05b5578 000000df c005d48c c07ed554 00000006 ee7ffe26 00000006 [ 1.435114] 9f40: c08e83c8 c08a11ac 00000006 c094d7c0 c094d7c0 c082350c 000000df c08838dc [ 1.443314] 9f60: c08838d0 c0823c48 00000006 00000006 c082350c 88855891 15413309 b850a414 [ 1.451513] 9f80: 05a48542 00000000 c0594fec 00000000 00000000 00000000 00000000 00000000 [ 1.459713] 9fa0: 00000000 c0594ff4 00000000 c000e5b8 00000000 00000000 00000000 00000000 [ 1.467913] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.476112] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d9451725 254584d0 [ 1.484320] [<c0494858>] (__clk_put) from [<c036197c>] (mv_platform_probe+0x2c0/0x43c) [ 1.492265] [<c036197c>] (mv_platform_probe) from [<c0304e58>] (platform_drv_probe+0x18/0x48) [ 1.500815] [<c0304e58>] (platform_drv_probe) from [<c03036b4>] (driver_probe_device+0x124/0x240) [ 1.509712] [<c03036b4>] (driver_probe_device) from [<c03038a0>] (__driver_attach+0x8c/0x90) [ 1.518173] [<c03038a0>] (__driver_attach) from [<c0301ccc>] (bus_for_each_dev+0x60/0x94) [ 1.526374] [<c0301ccc>] (bus_for_each_dev) from [<c0302e7c>] (bus_add_driver+0x148/0x1f0) [ 1.534662] [<c0302e7c>] (bus_add_driver) from [<c0303ea4>] (driver_register+0x78/0xf8) [ 1.542689] [<c0303ea4>] (driver_register) from [<c085c760>] (mv_init+0x30/0x50) [ 1.550108] [<c085c760>] (mv_init) from [<c0008bbc>] (do_one_initcall+0xf8/0x144) [ 1.557617] [<c0008bbc>] (do_one_initcall) from [<c0823c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566342] [<c0823c48>] (kernel_init_freeable) from [<c0594ff4>] (kernel_init+0x8/0xf0) [ 1.574458] [<c0594ff4>] (kernel_init) from [<c000e5b8>] (ret_from_fork+0x14/0x3c) [ 1.582049] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.588191] ---[ end trace d252a005e68fc3f1 ]--- [ 1.592830] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.592830] [ 1.601991] CPU0: stopping [ 1.604708] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc2-00271-g4675348 #1 [ 1.613266] [<c001588c>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 1.621036] [<c001143c>] (show_stack) from [<c059ab60>] (dump_stack+0x84/0x94) [ 1.628280] [<c059ab60>] (dump_stack) from [<c0014160>] (handle_IPI+0x148/0x174) [ 1.635697] [<c0014160>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x110) [ 1.644246] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x50) [ 1.652617] Exception stack(0xc08a5f68 to 0xc08a5fb0) [ 1.657683] 5f60: ffffffed 2d734000 c08ad4e4 00000000 c08ac4cc c08a4000 [ 1.665883] 5f80: c08ac450 c094d64b c05a5128 c08a4000 c094d64b c08a4000 00000000 c08a5fb0 [ 1.674082] 5fa0: c000f158 c0081194 60000113 ffffffff [ 1.679153] [<c0011fc0>] (__irq_svc) from [<c0081194>] (cpu_startup_entry+0x100/0x144) [ 1.687094] [<c0081194>] (cpu_startup_entry) from [<c0823b00>] (start_kernel+0x358/0x364) [ 1.695295] [<c0823b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 22.78 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00271-g4675348 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c93e0>] lr : [<c02c6a8c>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee990290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff8b4 ee910e10 c00ff9c4 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee261ca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9bb0 c01c9b98 c0551d88 ee90b210 c01c8338 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c85b8 00000000 c0519090 c01c8520 c01c6a30 dea0: ee85a7dc ee85e1b4 c0519090 ee990300 c05180c0 c01c7be0 c046c4bc c052edc0 dec0: c0519090 c0519090 00000006 c052edc0 c052edc0 c01c8bfc 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c04544a0 00000000 df00: 00000000 c04ad248 00000063 ee83df20 c0035c2c c0035c50 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acc78 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052edc0 c052edc0 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456f45d 0fbbed6f 47affddf df80: fbff7bce 00000000 c03a0828 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0830 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd3b [<c02c93e0>] (__clk_put) from [<c01ff8b4>] (mv_platform_probe+0x2ac/0x414) [<c01ff8b4>] (mv_platform_probe) from [<c01c9bb0>] (platform_drv_probe+0x18/0x48) [<c01c9bb0>] (platform_drv_probe) from [<c01c8338>] (really_probe+0x80/0x214) [<c01c8338>] (really_probe) from [<c01c85b8>] (__driver_attach+0x98/0x9c) [<c01c85b8>] (__driver_attach) from [<c01c6a30>] (bus_for_each_dev+0x60/0x94) [<c01c6a30>] (bus_for_each_dev) from [<c01c7be0>] (bus_add_driver+0x148/0x1f0) [<c01c7be0>] (bus_add_driver) from [<c01c8bfc>] (driver_register+0x78/0xf8) [<c01c8bfc>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0830>] (kernel_init+0x8/0xf0) [<c03a0830>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 205a99d38dd3a358 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc2-00271-g4675348 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5028>] (dump_stack+0x80/0x90) [<c03a5028>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000948 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.18 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

[PATCH Resend] PM: Remove unnecessary !!

by Viresh Kumar

Double ! or !! are normally required to get 0 or 1 out of a expression. A comparision always returns 0 or 1 and hence there is no need to apply double ! over it again. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- kernel/power/suspend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 62ee437..90b3d93 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -39,7 +39,7 @@ static const struct platform_suspend_ops *suspend_ops; static bool need_suspend_ops(suspend_state_t state) { - return !!(state > PM_SUSPEND_FREEZE); + return state > PM_SUSPEND_FREEZE; } static DECLARE_WAIT_QUEUE_HEAD(suspend_freeze_wait_head); -- 1.7.12.rc2.18.g61b472e

11 years, 3 months

1
1
0 0

Re: Is it ok for deferrable timer wakeup the idle cpu?

by Viresh Kumar

On 23 January 2014 11:11, Lei Wen <adrian.wenl(a)gmail.com> wrote: > On Wed, Jan 22, 2014 at 10:07 PM, Thomas Gleixner <tglx(a)linutronix.de> wrote: >> On Wed, 22 Jan 2014, Lei Wen wrote: >>> Recently I want to do the experiment for cpu isolation over 3.10 kernel. >>> But I find the isolated one is periodically waken up by IPI interrupt. >>> >>> By checking the trace, I find those IPI is generated by add_timer_on, >>> which would calls wake_up_nohz_cpu, and wake up the already idle cpu. >>> >>> With further checking, I find this timer is added by on_demand governor of >>> cpufreq. It would periodically check each cores' state. >>> The problem I see here is cpufreq_governor using INIT_DEFERRABLE_WORK >>> as the tool, while timer is made as deferrable anyway. >>> And what is more that cpufreq checking is very frequent. In my case, the >>> isolated cpu is wakenup by IPI every 5ms. >>> >>> So why kernel need to wake the remote processor when mount the deferrable >>> timer? As per my understanding, we'd better keep cpu as idle when use >>> the deferrable timer. >> >> Indeed, we can avoid the wakeup of the remote cpu when the timer is >> deferrable. > > Glad to hear that we could fix this unwanted wakeup. > Do you have related patches already? > >> >> Though you really want to figure out why the cpufreq governor is >> arming timers on other cores every 5ms. That smells like an utterly >> stupid approach. > > Not sure why cpufreq choose such frequent profiling over each cpu. > As my understanding, since kernel is smp, launching profiler over one cpu > would be enough... Hi Guys, So the first question is why cpufreq needs it and is it really stupid? Yes, it is stupid but that's how its implemented since a long time. It does so to get data about the load on CPUs, so that freq can be scaled up/down. Though there is a solution in discussion currently, which will take inputs from scheduler and so these background timers would go away. But we need to wait until that time. Now, why do we need that for every cpu, while that for a single cpu might be enough? The answer is cpuidle here: What if the cpu responsible for running timer goes to sleep? Who will evaluate the load then? And if we make this timer run on one cpu in non-deferrable mode then that cpu would be waken up again and again from idle. So, it was decided to have a per-cpu deferrable timer. Though to improve efficiency, once it is fired on any cpu, timer for all other CPUs are rescheduled, so that they don't fire before 5ms (sampling time).. I think below diff might get this fixed for you, though I am not sure if it breaks something else. Probably Thomas/Frederic can answer here. If this looks fine I will send it formally again: diff --git a/kernel/timer.c b/kernel/timer.c index accfd24..3a2c7fa 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -940,7 +940,8 @@ void add_timer_on(struct timer_list *timer, int cpu) * makes sure that a CPU on the way to stop its tick can not * evaluate the timer wheel. */ - wake_up_nohz_cpu(cpu); + if (!tbase_get_deferrable(timer->base)) + wake_up_nohz_cpu(cpu); spin_unlock_irqrestore(&base->lock, flags); } EXPORT_SYMBOL_GPL(add_timer_on);

11 years, 3 months

4
11
0 0

arm-soc boot: 34 pass, 1 fail (v3.14-rc2-24-g0ef783f)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc2-24-g0ef783f Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 1.9 sec omap4-panda PASS: 1 min 9.0 sec omap3-tobi PASS: 0 min 26.1 sec am335x-bone PASS: 0 min 27.6 sec omap4-panda-es PASS: 1 min 13.7 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.9 sec sun4i-a10-cubieboard PASS: 0 min 12.5 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 19.5 sec tegra30-beaver PASS: 0 min 26.8 sec am335x-boneblack PASS: 0 min 23.5 sec omap3-beagle-xm PASS: 0 min 54.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 0 min 51.4 sec armada-xp-openblocks-ax3-4 PASS: 1 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 19.0 sec bcm28155-ap PASS: 1 min 20.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec omap3-tobi PASS: 0 min 21.6 sec am335x-bone PASS: 0 min 26.2 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 56.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.9 sec sama5_defconfig --------------- sama5d35ek PASS: 1 min 36.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.3 sec armada-370-mirabox PASS: 0 min 20.3 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00024-g0ef783f #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c93a0>] lr : [<c02c6a4c>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: eea85290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff8b4 ee910e10 c00ff9c4 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 eea4eca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9bb0 c01c9b98 c0551d88 ee90b210 c01c8338 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c85b8 00000000 c0519090 c01c8520 c01c6a30 dea0: ee85a7dc ee85e1b4 c0519090 eea85300 c05180c0 c01c7be0 c046c4bc c052edc0 dec0: c0519090 c0519090 00000006 c052edc0 c052edc0 c01c8bfc 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c04544a0 00000000 df00: 00000000 c04ad1d8 00000063 ee83df20 c0035c2c c0035c50 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acc78 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052edc0 c052edc0 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 4faffddf df80: f9ff7bce 00000000 c03a080c 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0814 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd7b [<c02c93a0>] (__clk_put) from [<c01ff8b4>] (mv_platform_probe+0x2ac/0x414) [<c01ff8b4>] (mv_platform_probe) from [<c01c9bb0>] (platform_drv_probe+0x18/0x48) [<c01c9bb0>] (platform_drv_probe) from [<c01c8338>] (really_probe+0x80/0x214) [<c01c8338>] (really_probe) from [<c01c85b8>] (__driver_attach+0x98/0x9c) [<c01c85b8>] (__driver_attach) from [<c01c6a30>] (bus_for_each_dev+0x60/0x94) [<c01c6a30>] (bus_for_each_dev) from [<c01c7be0>] (bus_add_driver+0x148/0x1f0) [<c01c7be0>] (bus_add_driver) from [<c01c8bfc>] (driver_register+0x78/0xf8) [<c01c8bfc>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0814>] (kernel_init+0x8/0xf0) [<c03a0814>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace f721f17b32de3cd8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc2-00024-g0ef783f #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a500c>] (dump_stack+0x80/0x90) [<c03a500c>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000094c 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.26 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

1
0
0 0

mainline boot: 35 pass, 2 fail (v3.14-rc2-267-g9398a10)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc2-267-g9398a10 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.4 sec omap3-beagle-xm PASS: 1 min 0.0 sec omap4-panda PASS: 1 min 18.7 sec am335x-bone PASS: 0 min 27.2 sec omap5-uevm PASS: 1 min 0.9 sec omap4-panda-es PASS: 1 min 9.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 42.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 17.0 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 15.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.1 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.4 sec tegra30-beaver PASS: 0 min 19.5 sec am335x-boneblack PASS: 0 min 23.3 sec omap3-beagle-xm PASS: 0 min 50.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec armada-370-mirabox PASS: 0 min 21.1 sec omap4-panda PASS: 0 min 52.7 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 21.8 sec sun4i-a10-cubieboard PASS: 0 min 21.4 sec bcm28155-ap PASS: 1 min 8.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 48.8 sec imx6q-wandboard PASS: 0 min 17.0 sec omap4-panda-es PASS: 0 min 57.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 19.1 sec armada-370-mirabox PASS: 0 min 17.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ [ 0.434670] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.455927] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.189115] console [ttyS0] enabled [ 1.213108] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222328] Serial: IMX driver [ 1.225599] STMicroelectronics ASC driver initialized [ 1.231021] serial: Freescale lpuart driver [ 1.235310] [drm] Initialized drm 1.1.0 20060810 [ 1.242922] loop: module loaded [ 1.246557] sata_mv d00a0000.sata: version 1.28 [ 1.251162] sata_mv d00a0000.sata: unable to find phy [ 1.256236] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264366] pgd = c0004000 [ 1.267088] [00000054] *pgd=00000000 [ 1.270685] Internal error: Oops: 5 [#1] SMP ARM [ 1.275312] Modules linked in: [ 1.278388] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2-00267-g9398a10 #1 [ 1.285976] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291398] PC is at __clk_put+0x1c/0x8c [ 1.295331] LR is at clk_prepare_lock+0x10/0xfc [ 1.299873] pc : [<c0494858>] lr : [<c0491f04>] psr: 60000113 [ 1.299873] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311378] r10: ed399b90 r9 : ed0d3c00 r8 : 00000004 [ 1.316615] r7 : ffffffed r6 : 00000000 r5 : ed1530d0 r4 : 00000000 [ 1.323159] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.329703] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.337029] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.342788] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.348808] Stack: (0xed059e10 to 0xed05a000) [ 1.353177] 9e00: 00000001 c036197c c085c730 000000df [ 1.361377] 9e20: ed0ce1b0 00000002 c0609db4 00000000 74726f70 ed0c0030 00000001 ed3a1990 [ 1.369577] 9e40: 000000df ed0d3c10 c091eb38 00000000 c091eb38 c085c730 000000df ed058030 [ 1.377777] 9e60: 00000000 c0304e58 c0304e40 ed0d3c10 c0987d8c c03036b4 00000000 ed0d3c10 [ 1.385977] 9e80: c091eb38 ed0d3c44 00000000 c03038a0 00000000 c091eb38 c0303814 c0301ccc [ 1.394177] 9ea0: ed03b85c ed09a934 c091eb38 ed399b00 c0918ef8 c0302e7c c0777f08 c094d7c0 [ 1.402377] 9ec0: c091eb38 c091eb38 00000006 c094d7c0 c094d7c0 c0303ea4 00000000 c08a11ac [ 1.410577] 9ee0: 00000006 c085c760 c08a11ac c0008bbc ed003c00 c072c664 ed0c7380 c05a5da0 [ 1.418777] 9f00: 00000000 c094d7c0 c082350c c012dcb0 00000000 c08e83d8 60000113 00000001 [ 1.426977] 9f20: ee7ffe1b c05b5578 000000df c005d48c c07ed554 00000006 ee7ffe26 00000006 [ 1.435177] 9f40: c08e83c8 c08a11ac 00000006 c094d7c0 c094d7c0 c082350c 000000df c08838dc [ 1.443377] 9f60: c08838d0 c0823c48 00000006 00000006 c082350c 80854010 44401209 90100404 [ 1.451576] 9f80: 01a08002 00000000 c0594fec 00000000 00000000 00000000 00000000 00000000 [ 1.459776] 9fa0: 00000000 c0594ff4 00000000 c000e5b8 00000000 00000000 00000000 00000000 [ 1.467976] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.476175] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 01400721 25008000 [ 1.484384] [<c0494858>] (__clk_put) from [<c036197c>] (mv_platform_probe+0x2c0/0x43c) [ 1.492329] [<c036197c>] (mv_platform_probe) from [<c0304e58>] (platform_drv_probe+0x18/0x48) [ 1.500880] [<c0304e58>] (platform_drv_probe) from [<c03036b4>] (driver_probe_device+0x124/0x240) [ 1.509777] [<c03036b4>] (driver_probe_device) from [<c03038a0>] (__driver_attach+0x8c/0x90) [ 1.518239] [<c03038a0>] (__driver_attach) from [<c0301ccc>] (bus_for_each_dev+0x60/0x94) [ 1.526439] [<c0301ccc>] (bus_for_each_dev) from [<c0302e7c>] (bus_add_driver+0x148/0x1f0) [ 1.534727] [<c0302e7c>] (bus_add_driver) from [<c0303ea4>] (driver_register+0x78/0xf8) [ 1.542754] [<c0303ea4>] (driver_register) from [<c085c760>] (mv_init+0x30/0x50) [ 1.550173] [<c085c760>] (mv_init) from [<c0008bbc>] (do_one_initcall+0xf8/0x144) [ 1.557682] [<c0008bbc>] (do_one_initcall) from [<c0823c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566407] [<c0823c48>] (kernel_init_freeable) from [<c0594ff4>] (kernel_init+0x8/0xf0) [ 1.574522] [<c0594ff4>] (kernel_init) from [<c000e5b8>] (ret_from_fork+0x14/0x3c) [ 1.582113] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.588255] ---[ end trace 92921f83f7870ba6 ]--- [ 1.592894] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.592894] [ 1.602054] CPU0: stopping [ 1.604771] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc2-00267-g9398a10 #1 [ 1.613329] [<c001588c>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 1.621099] [<c001143c>] (show_stack) from [<c059ab60>] (dump_stack+0x84/0x94) [ 1.628342] [<c059ab60>] (dump_stack) from [<c0014160>] (handle_IPI+0x148/0x174) [ 1.635760] [<c0014160>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x110) [ 1.644309] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x50) [ 1.652679] Exception stack(0xc08a5f68 to 0xc08a5fb0) [ 1.657745] 5f60: ffffffed 2d734000 c08ad4e4 00000000 c08ac4cc c08a4000 [ 1.665944] 5f80: c08ac450 c094d64b c05a5128 c08a4000 c094d64b c08a4000 00000000 c08a5fb0 [ 1.674141] 5fa0: c000f158 c0081194 60000113 ffffffff [ 1.679212] [<c0011fc0>] (__irq_svc) from [<c0081194>] (cpu_startup_entry+0x100/0x144) [ 1.687153] [<c0081194>] (cpu_startup_entry) from [<c0823b00>] (start_kernel+0x358/0x364) [ 1.695353] [<c0823b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 21.79 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------

11 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel