I have update it to remove "over 80 characters" warming, so no warnings from checkpatch.pl at last.
git repo: http://git.linaro.org/gitweb?p=people/hongbozhang/kernel.git%3Ba=summary
branch: ste_thermal_v3.5_rc6
On 13 July 2012 16:37, Hongbo Zhang hongbo.zhang@linaro.org wrote:
There are 5 line over 80 characters, is this acceptable or should I obey the checkpatch.pl strictly?
for example this line: [tab] [tab] [tab] ret = thermal_zone_bind_cooling_device(thermal, i, cdev);
I think keeping this code in one line seems neatly.
On 13 July 2012 15:51, hongbo.zhang hongbo.zhang@linaro.org wrote:
From: "hongbo.zhang" hongbo.zhang@stericsson.com
Signed-off-by: hongbo.zhang hongbo.zhang@linaro.com
arch/arm/configs/u8500_defconfig | 4 + arch/arm/mach-ux500/board-mop500.c | 69 ++++ drivers/thermal/Kconfig | 20 ++ drivers/thermal/Makefile | 4 +- drivers/thermal/db8500_cpufreq_cooling.c | 167 +++++++++ drivers/thermal/db8500_thermal.c | 476 ++++++++++++++++++++++++++ include/linux/platform_data/db8500_thermal.h | 39 +++ 7 files changed, 778 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/db8500_cpufreq_cooling.c create mode 100644 drivers/thermal/db8500_thermal.c create mode 100644 include/linux/platform_data/db8500_thermal.h
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 036419f..15a455e 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -117,3 +117,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y +CONFIG_THERMAL=y +CONFIG_CPU_THERMAL=y +CONFIG_DB8500_THERMAL=y +CONFIG_DB8500_CPUFREQ_COOLING=y diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 1509a3c..77b3fca 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -30,6 +30,8 @@ #include <linux/smsc911x.h> #include <linux/gpio_keys.h> #include <linux/delay.h> +#include <linux/platform_data/db8500_thermal.h>
#include <linux/of.h> #include <linux/of_platform.h> #include <linux/leds.h> @@ -216,6 +218,71 @@ struct platform_device ab8500_device = { };
/*
- Thermal Sensor
- */
+static struct resource db8500_thsens_resources[] = {
{.name = "IRQ_HOTMON_LOW",.start = IRQ_PRCMU_HOTMON_LOW,.end = IRQ_PRCMU_HOTMON_LOW,.flags = IORESOURCE_IRQ,},{.name = "IRQ_HOTMON_HIGH",.start = IRQ_PRCMU_HOTMON_HIGH,.end = IRQ_PRCMU_HOTMON_HIGH,.flags = IORESOURCE_IRQ,},+};
+static struct db8500_trip_point db8500_trips_table[] = {
[0] = {.temp = 70000,.type = THERMAL_TRIP_ACTIVE,.cooling_dev_name = {[0] = "thermal-cpufreq-0",},},[1] = {.temp = 75000,.type = THERMAL_TRIP_ACTIVE,.cooling_dev_name = {[0] = "thermal-cpufreq-1",},},[2] = {.temp = 80000,.type = THERMAL_TRIP_ACTIVE,.cooling_dev_name = {[0] = "thermal-cpufreq-2",},},[3] = {.temp = 85000,.type = THERMAL_TRIP_CRITICAL,},+};
+static struct db8500_thsens_platform_data db8500_thsens_data = {
.trip_points = db8500_trips_table,.num_trips = ARRAY_SIZE(db8500_trips_table),+};
+static struct platform_device u8500_thsens_device = {
.name = "db8500_thermal",.resource = db8500_thsens_resources,.num_resources = ARRAY_SIZE(db8500_thsens_resources),.dev = {.platform_data = &db8500_thsens_data,},+};
+static struct platform_device u8500_cpufreq_cooling_device = {
.name = "db8500_cpufreq_cooling",+};
+/*
- TPS61052
*/
@@ -623,6 +690,8 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &ab8500_device,
&u8500_thsens_device,&u8500_cpufreq_cooling_device,};
static struct platform_device *snowball_of_platform_devs[] __initdata = { diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index d9c529f..5482116 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -30,6 +30,26 @@ config CPU_THERMAL and not the ACPI interface. If you want this support, you should say Y or M here.
+config DB8500_THERMAL
bool "db8500 thermal management"depends on THERMALdefault yhelpAdds DB8500 thermal management implementation according to thethermal
management framework. A thermal zone with several trip pointswill be
created. Cooling devices can be binded to the trip points tocool this
thermal zone if trip points reached.+config DB8500_CPUFREQ_COOLING
tristate "db8500 cpufreq cooling"depends on CPU_THERMALdefault yhelpAdds DB8500 cpufreq cooling devices, and these cooling devicescan be
binded to thermal zone trip points. When a trip point reached,the
binded cpufreq cooling device turns active to set CPU frequencylow to
cool down the CPU.config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on THERMAL diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 30c456c..d146456 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,5 +3,7 @@ #
obj-$(CONFIG_THERMAL) += thermal_sys.o -obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o +obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o +obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o +obj-$(CONFIG_DB8500_CPUFREQ_COOLING) +=db8500_cpufreq_cooling.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c new file mode 100644 index 0000000..2c2c91b --- /dev/null +++ b/drivers/thermal/db8500_cpufreq_cooling.c @@ -0,0 +1,167 @@ +/*
- db8500_cpufreq_cooling.c - db8500 cpufreq works as cooling device.
- Copyright (C) 2012 ST-Ericsson
- Copyright (C) 2012 Linaro Ltd.
- Author: Hongbo Zhang hognbo.zhang@stericsson.com
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- */
+#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/cpufreq.h> +#include <linux/cpu_cooling.h> +#include <linux/err.h>
+static LIST_HEAD(db8500_cpufreq_cdev_list);
+struct db8500_cpufreq_cdev {
struct thermal_cooling_device *cdev;struct list_head node;+};
+/* Local function to create cpufreq clip table */ +static int cpufreq_table_create(struct platform_device *pdev,
struct freq_clip_table **freq_tab, int *num_freq)+{
struct cpufreq_frequency_table *table;struct freq_clip_table *freq_clip;unsigned int temp;int i, j, count = 0;table = cpufreq_frequency_get_table(0);if (!table)return -ENODATA;/* Check number of frequencies */for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {if (table[i].frequency == CPUFREQ_ENTRY_INVALID)continue;count++;}freq_clip = devm_kzalloc(&pdev->dev,sizeof(struct freq_clip_table) * count,GFP_KERNEL);
/* Save frequencies */count = 0;for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {if (table[i].frequency == CPUFREQ_ENTRY_INVALID)continue;freq_clip[count].freq_clip_max = table[i].frequency;count++;}/* Descending order frequencies */for (i = 0; i <= count - 2; i++)for (j = i + 1; j <= count - 1; j++)if (freq_clip[i].freq_clip_max <freq_clip[j].freq_clip_max) {
temp = freq_clip[i].freq_clip_max;freq_clip[i].freq_clip_max =freq_clip[j].freq_clip_max;
freq_clip[j].freq_clip_max = temp;}for (i = 0; i < count; i++) {freq_clip[i].mask_val = cpu_present_mask;pr_info("db8500_clip_table.%d: %d\n", i,freq_clip[i].freq_clip_max);}*freq_tab = freq_clip;*num_freq = count;return 0;+}
+static int __devinit db8500_cpufreq_cooling_probe(struct platform_device *pdev) +{
struct freq_clip_table *freq_tab = NULL;struct db8500_cpufreq_cdev *cooling_devs;int i, ret, num_freq = 0;if (cpufreq_table_create(pdev, &freq_tab, &num_freq))return -ENODATA;if (unlikely(!freq_tab || !num_freq))return -ENODATA;/* Create one cooling device for each clip frequency */for (i = 0; i < num_freq; i++) {cooling_devs = devm_kzalloc(&pdev->dev,sizeof(struct db8500_cpufreq_cdev),GFP_KERNEL);
if (!cooling_devs) {ret = -ENOMEM;goto exit;}cooling_devs->cdev =cpufreq_cooling_register(&freq_tab[i], 1);
if (IS_ERR(cooling_devs->cdev)) {pr_err("Failed to register cpufreq coolingdevice\n");
ret = PTR_ERR(cooling_devs->cdev);goto exit;}list_add_tail(&cooling_devs->node,&db8500_cpufreq_cdev_list);
pr_info("Cooling device regestered: %s\n",cooling_devs->cdev->type);}return 0;+exit:
list_for_each_entry(cooling_devs, &db8500_cpufreq_cdev_list, node)cpufreq_cooling_unregister(cooling_devs->cdev);return ret;+}
+static int __devexit db8500_cpufreq_cooling_remove(struct platform_device *pdev) +{
struct db8500_cpufreq_cdev *cooling_devs;list_for_each_entry(cooling_devs, &db8500_cpufreq_cdev_list, node)cpufreq_cooling_unregister(cooling_devs->cdev);return 0;+}
+/* No actions required in suspend/resume, so lack of them */ +static struct platform_driver db8500_cpufreq_cooling_driver = {
.driver = {.owner = THIS_MODULE,.name = "db8500_cpufreq_cooling",},.probe = db8500_cpufreq_cooling_probe,.remove = __devexit_p(db8500_cpufreq_cooling_remove),+};
+static int __init db8500_cpufreq_cooling_init(void) +{
return platform_driver_register(&db8500_cpufreq_cooling_driver);+}
+static void __exit db8500_cpufreq_cooling_exit(void) +{
platform_driver_unregister(&db8500_cpufreq_cooling_driver);+}
+/* Should be later than db8500_cpufreq_register */ +late_initcall(db8500_cpufreq_cooling_init); +module_exit(db8500_cpufreq_cooling_exit);
+MODULE_AUTHOR("Hongbo Zhang hongbo.zhang@stericsson.com"); +MODULE_DESCRIPTION("db8500 cpufreq cooling driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c new file mode 100644 index 0000000..32afaeb --- /dev/null +++ b/drivers/thermal/db8500_thermal.c @@ -0,0 +1,476 @@ +/*
- db8500_thermal.c - db8500 Thermal Management Implementation
- Copyright (C) 2012 ST-Ericsson
- Copyright (C) 2012 Linaro Ltd.
- Author: Hongbo Zhang hognbo.zhang@stericsson.com
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- */
+#include <linux/module.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/thermal.h> +#include <linux/cpu_cooling.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/db8500_thermal.h>
+#define PRCMU_DEFAULT_MEASURE_TIME 0xFFF +#define PRCMU_DEFAULT_LOW_TEMP 0
+struct db8500_thermal_zone {
struct thermal_zone_device *therm_dev;struct mutex th_lock;struct platform_device *thsens_pdev;struct work_struct therm_work;struct db8500_thsens_platform_data *trip_tab;enum thermal_device_mode mode;unsigned long cur_temp_pseudo;unsigned int cur_index;int low_irq;int high_irq;+};
+/* Bind callback functions for thermal zone */ +static int db8500_cdev_bind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)+{
struct db8500_thermal_zone *pzone;struct db8500_thsens_platform_data *ptrips;char *cdev_name;int i, j, ret;pzone = (struct db8500_thermal_zone *)thermal->devdata;ptrips = pzone->trip_tab;if (!cdev->type)return -EINVAL;ret = -ENODEV;for (i = 0; i < ptrips->num_trips; i++)for (j = 0; j < COOLING_DEV_MAX; j++) {cdev_name =ptrips->trip_points[i].cooling_dev_name[j];
if (!cdev_name)continue;if (strcmp(cdev_name, cdev->type))continue;ret = thermal_zone_bind_cooling_device(thermal,i, cdev);
if (ret)pr_err("Error binding cooling device.\n");elsepr_info("%s binded to %d.\n", cdev->type,i);
}/* Force an update since polling mode is not used */schedule_work(&pzone->therm_work);return ret;+}
+/* Unbind callback functions for thermal zone */ +static int db8500_cdev_unbind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)+{
struct db8500_thermal_zone *pzone;struct db8500_thsens_platform_data *ptrips;char *cdev_name;int i, j, ret;pzone = (struct db8500_thermal_zone *)thermal->devdata;ptrips = pzone->trip_tab;if (!cdev->type)return -EINVAL;ret = -ENODEV;for (i = 0; i < ptrips->num_trips; i++)for (j = 0; j < COOLING_DEV_MAX; j++) {cdev_name =ptrips->trip_points[i].cooling_dev_name[j];
if (!cdev_name)continue;if (strcmp(cdev_name, cdev->type))continue;/* Invalidate the cooling device before unbindingit */
if (cdev->ops->set_cur_state)cdev->ops->set_cur_state(cdev, 0);ret = thermal_zone_unbind_cooling_device(thermal,i, cdev);
if (ret)pr_err("Error unbinding coolingdevice.\n");
elsepr_info("%s unbinded from %d.\n",cdev->type, i);
}return ret;+}
+/* Get temperature callback functions for thermal zone */ +static int db8500_sys_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)+{
struct db8500_thermal_zone *pzone;pzone = (struct db8500_thermal_zone *)thermal->devdata;/* TODO: There is no PRCMU interface to get temperature datacurrently,
so a pseudo temperature is returned , it works for the thermalframework
and this will be fixed when the PRCMU interface is available */*temp = pzone->cur_temp_pseudo;return 0;+}
+/* Get mode callback functions for thermal zone */ +static int db8500_sys_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)+{
struct db8500_thermal_zone *pzone;pzone = (struct db8500_thermal_zone *)thermal->devdata;mutex_lock(&pzone->th_lock);*mode = pzone->mode;mutex_unlock(&pzone->th_lock);return 0;+}
+/* Set mode callback functions for thermal zone */ +static int db8500_sys_set_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode mode)+{
struct db8500_thermal_zone *pzone;struct thermal_zone_device *pthdev;pzone = (struct db8500_thermal_zone *)thermal->devdata;pthdev = pzone->therm_dev;if (!pthdev) {pr_err("Thermal zone not registered.\n");return 0;}mutex_lock(&pzone->th_lock);if (mode == THERMAL_DEVICE_ENABLED) {if (pzone->mode == THERMAL_DEVICE_DISABLED)pr_info("Thermal function started.\n");elsepr_info("Thermal function already started.\n");} else {if (pzone->mode == THERMAL_DEVICE_ENABLED)pr_info("Thermal function stoped.\n");elsepr_info("Thermal function already stoped.\n");}pzone->mode = mode;mutex_unlock(&pzone->th_lock);return 0;+}
+/* Get trip type callback function for thermal zone */ +static int db8500_sys_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)+{
struct db8500_thermal_zone *pzone;struct db8500_thsens_platform_data *ptrips;pzone = (struct db8500_thermal_zone *)thermal->devdata;ptrips = pzone->trip_tab;if (trip >= ptrips->num_trips)return -EINVAL;*type = ptrips->trip_points[trip].type;return 0;+}
+/* Get trip temperature callback function for thermal zone */ +static int db8500_sys_get_trip_temp(struct thermal_zone_device *thermal,
int trip, unsigned long *temp)+{
struct db8500_thermal_zone *pzone;struct db8500_thsens_platform_data *ptrips;pzone = (struct db8500_thermal_zone *)thermal->devdata;ptrips = pzone->trip_tab;if (trip >= ptrips->num_trips)return -EINVAL;*temp = ptrips->trip_points[trip].temp;return 0;+}
+/* Get critical temperature callback function for thermal zone */ +static int db8500_sys_get_crit_temp(struct thermal_zone_device *thermal,
unsigned long *temp)+{
struct db8500_thermal_zone *pzone;struct db8500_thsens_platform_data *ptrips;int i;pzone = (struct db8500_thermal_zone *)thermal->devdata;ptrips = pzone->trip_tab;for (i = (ptrips->num_trips - 1) ; i > 0 ; i--) {if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL){
*temp = ptrips->trip_points[i].temp;return 0;}}return -EINVAL;+}
+static struct thermal_zone_device_ops thdev_ops = {
.bind = db8500_cdev_bind,.unbind = db8500_cdev_unbind,.get_temp = db8500_sys_get_temp,.get_mode = db8500_sys_get_mode,.set_mode = db8500_sys_set_mode,.get_trip_type = db8500_sys_get_trip_type,.get_trip_temp = db8500_sys_get_trip_temp,.get_crit_temp = db8500_sys_get_crit_temp,+};
+static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data) +{
struct db8500_thermal_zone *pzone = irq_data;struct db8500_thsens_platform_data *ptrips;unsigned long next_low, next_high;unsigned int idx;ptrips = pzone->trip_tab;idx = pzone->cur_index;if (unlikely(idx == 0))/* Meaningless for thermal management, ignoring it */return IRQ_HANDLED;if (idx == 1) {next_high = ptrips->trip_points[0].temp;next_low = PRCMU_DEFAULT_LOW_TEMP;} else {next_high = ptrips->trip_points[idx-1].temp;next_low = ptrips->trip_points[idx-2].temp;}pzone->cur_index -= 1;pzone->cur_temp_pseudo = (next_high + next_low)/2;prcmu_stop_temp_sense();prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000));prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);pr_debug("PRCMU set max %ld, set min %ld\n", next_high, next_low);schedule_work(&pzone->therm_work);return IRQ_HANDLED;+}
+static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data) +{
struct db8500_thermal_zone *pzone = irq_data;struct db8500_thsens_platform_data *ptrips;unsigned long next_low, next_high;unsigned int idx;ptrips = pzone->trip_tab;idx = pzone->cur_index;if (idx < ptrips->num_trips - 1) {next_high = ptrips->trip_points[idx+1].temp;next_low = ptrips->trip_points[idx].temp;pzone->cur_index += 1;pzone->cur_temp_pseudo = (next_high + next_low)/2;prcmu_stop_temp_sense();prcmu_config_hotmon((u8)(next_low/1000),(u8)(next_high/1000));
prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);pr_debug("PRCMU set max %ld, min %ld\n", next_high,next_low);
}if (idx == ptrips->num_trips - 1)pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp +1;
schedule_work(&pzone->therm_work);return IRQ_HANDLED;+}
+static void db8500_thermal_work(struct work_struct *work) +{
enum thermal_device_mode cur_mode;struct db8500_thermal_zone *pzone;pzone = container_of(work, struct db8500_thermal_zone,therm_work);
mutex_lock(&pzone->th_lock);cur_mode = pzone->mode;mutex_unlock(&pzone->th_lock);if (cur_mode == THERMAL_DEVICE_DISABLED) {pr_warn("Warning: thermal function disabled.\n");return;}thermal_zone_device_update(pzone->therm_dev);pr_debug("db8500_thermal_work finished.\n");+}
+static int __devinit db8500_thermal_probe(struct platform_device *pdev) +{
struct db8500_thermal_zone *pzone = NULL;struct db8500_thsens_platform_data *ptrips;int low_irq, high_irq, ret = 0;unsigned long dft_low, dft_high;pr_info("Function db8500_thermal_probe.\n");pzone = devm_kzalloc(&pdev->dev,sizeof(struct db8500_thermal_zone), GFP_KERNEL);if (!pzone)return -ENOMEM;pzone->thsens_pdev = pdev;low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW");if (low_irq < 0) {pr_err("Get IRQ_HOTMON_LOW failed.\n");return low_irq;}ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL,prcmu_low_irq_handler,IRQF_NO_SUSPEND | IRQF_ONESHOT, "dbx500_temp_low", pzone);if (ret < 0) {pr_err("Failed to allocate temp low irq.\n");return ret;}high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH");if (high_irq < 0) {pr_err("Get IRQ_HOTMON_HIGH failed.\n");return high_irq;}ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL,prcmu_high_irq_handler,IRQF_NO_SUSPEND | IRQF_ONESHOT, "dbx500_temp_high",pzone);
if (ret < 0) {pr_err("Failed to allocate temp high irq.\n");return ret;}pzone->low_irq = low_irq;pzone->high_irq = high_irq;pzone->mode = THERMAL_DEVICE_DISABLED;mutex_init(&pzone->th_lock);INIT_WORK(&pzone->therm_work, db8500_thermal_work);ptrips = pdev->dev.platform_data;pzone->trip_tab = ptrips;pzone->therm_dev =thermal_zone_device_register("db8500_thermal_zone",
ptrips->num_trips, pzone, &thdev_ops, 0, 0, 0, 0);if (IS_ERR(pzone->therm_dev)) {pr_err("Failed to register thermal zone device\n");return PTR_ERR(pzone->therm_dev);}dft_low = PRCMU_DEFAULT_LOW_TEMP;dft_high = ptrips->trip_points[0].temp;prcmu_stop_temp_sense();prcmu_config_hotmon((u8)(dft_low/1000), (u8)(dft_high/1000));prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);pzone->cur_index = 0;pzone->cur_temp_pseudo = (dft_low + dft_high)/2;pzone->mode = THERMAL_DEVICE_ENABLED;platform_set_drvdata(pdev, pzone);return 0;+}
+static int __devexit db8500_thermal_remove(struct platform_device *pdev) +{
struct db8500_thermal_zone *pzone;pzone = platform_get_drvdata(pdev);cancel_work_sync(&pzone->therm_work);if (pzone->therm_dev)thermal_zone_device_unregister(pzone->therm_dev);return 0;+}
+static int db8500_thermal_suspend(struct platform_device *pdev,
pm_message_t state)+{
struct db8500_thermal_zone *pzone;pzone = platform_get_drvdata(pdev);flush_work_sync(&pzone->therm_work);return 0;+}
+static int db8500_thermal_resume(struct platform_device *pdev) +{
return 0;+}
+static struct platform_driver db8500_thermal_driver = {
.driver = {.owner = THIS_MODULE,.name = "db8500_thermal"},.probe = db8500_thermal_probe,.suspend = db8500_thermal_suspend,.resume = db8500_thermal_resume,.remove = __devexit_p(db8500_thermal_remove),+};
+static int __init db8500_thermal_init(void) +{
return platform_driver_register(&db8500_thermal_driver);+}
+static void __exit db8500_thermal_exit(void) +{
platform_driver_unregister(&db8500_thermal_driver);+}
+module_init(db8500_thermal_init); +module_exit(db8500_thermal_exit);
+MODULE_AUTHOR("Hongbo Zhang hongbo.zhang@stericsson.com"); +MODULE_DESCRIPTION("db8500 thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/db8500_thermal.h b/include/linux/platform_data/db8500_thermal.h new file mode 100644 index 0000000..0b6d164 --- /dev/null +++ b/include/linux/platform_data/db8500_thermal.h @@ -0,0 +1,39 @@ +/*
- db8500_thermal.h - db8500 Thermal Management Implementation
- Copyright (C) 2012 ST-Ericsson
- Copyright (C) 2012 Linaro Ltd.
- Author: Hongbo Zhang hognbo.zhang@stericsson.com
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- */
+#ifndef _DB8500_THERMAL_H_ +#define _DB8500_THERMAL_H_
+#include <linux/thermal.h>
+#define COOLING_DEV_MAX 8
+struct db8500_trip_point {
unsigned long temp;enum thermal_trip_type type;char *cooling_dev_name[COOLING_DEV_MAX];+};
+struct db8500_thsens_platform_data {
struct db8500_trip_point *trip_points;int num_trips;+};
+#endif /* _DB8500_THERMAL_H_ */
1.7.10