Linaro Android 13.07 RC1 (Calender week 27,2013):
Here is the test result summary of Calender week 27 Linaro android
Jellybean 13.07 RC1, in this week test will be conducted to those
which are marked RC into the result spreadsheet as follows.
[1] TI-Panda 4460;
[2] TI-Panda 4430
[3] ARM versatile express A9;
[1] TI-Panda 4460 with Linaro Linaro Android Jellybean 4.2.2 (Column: AR)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd…
all features are works well. Please refer to the result spreadsheet.
[2] TI-Panda 4460 with Linaro Linaro Android Jellybean 4.2.2 (Column: AR)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd…
Please refer to the result spreadsheet.
[3] ARM Versatile Express A9 with Linaro android Jellybean 4.2.2 (Column: AR)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd…
Please refer to the result spreadsheet.
Thank You!
Soumya Basak
Could I upload this patch?
On 3 July 2013 20:43, Shaojie Sun <shaojie.sun(a)linaro.org> wrote:
> Becaese "case '\r'" cann't be triggered by ENTER key. So replace "case
> '\r'" by "case KEY_ENTER".
>
> And please help me to check that I can upload this patch directly or not.
Hello,
After couple of iterations, android-build.linaro.org was updated to
authenticate against Linaro Login system. Please use your
login.linaro.org username (with @linaro.org suffix) and password to
login from now on. Personal jobs were also renamed to have
firstname.lastname prefix instead of Launchpad username. If you cannot
see your jobs, please contact me to check their state.
Below is interim progress report for completeness.
Thanks,
Paul
Begin forwarded message:
Date: Wed, 26 Jun 2013 22:43:07 +0300
From: Paul Sokolovsky <Paul.Sokolovsky(a)linaro.org>
To: Paul Sokolovsky <Paul.Sokolovsky(a)linaro.org>
Cc: linaro-android <linaro-android(a)lists.linaro.org>, Infrastructure
<infrastructure(a)linaro.org>, Linaro Validation
<linaro-validation(a)lists.linaro.org>, Philip Colmer
<philip.colmer(a)linaro.org> Subject: Re: [ANN] android-build.linaro.org
upgrade to Linaro Login Service
Hello,
On Wed, 26 Jun 2013 15:46:50 +0300
Paul Sokolovsky <Paul.Sokolovsky(a)linaro.org> wrote:
> Hello,
>
> With Android releases out, I'd like to proceed with switchover of
> Android Build frontend authenticaton to Linaro Login. Estimated
> downtime is 2hrs. To minimize impact, I'm scheduling this for later
> evening UTC (around 8pm UTC). Let me know if you need access to a-b
> at that time (otherwise, upgrade is OKed by Vishal).
Upgrade went well, except that now it's not possible to create personal
builds. That's because login username is used to form created job
name, and with Linaro Login, username is first.last(a)linaro.org - that's
not valid as part of job name, and besides that, it's too long. Even if
I adhocly remapped it to first-last, it's still too long, and still
would required boring renaming of existing jobs.
Atlassian Crowd supports login aliases, Philip mentioned that it's
possible to create one, but I skipped doing that just for me, hoping
that it would be offered for all folks as part of git migration or
something, but that didn't happen. Well, I guess it's time to raise
that request now - going submit ITS ticket for this.
--
Best Regards,
Paul
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linarohttp://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
--
Best Regards,
Paul
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linarohttp://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
Hi,
There's a few warning that nobody noticed or cared until now:
[...]
Value requested for CONFIG_OABI_COMPAT not in final .config
Requested value: # CONFIG_OABI_COMPAT is not set
Actual value:
Value requested for CONFIG_MTD_CHAR not in final .config
Requested value: CONFIG_MTD_CHAR=y
Actual value:
Value requested for CONFIG_ENABLE_DEFAULT_TRACERS not in final .config
Requested value: CONFIG_ENABLE_DEFAULT_TRACERS=y
Actual value:
[...]
MTD_CHAR doesn't exist anymore.
ENABLE_DEFAULT_TRACERS depends on !GENERIC_TRACER
Is there any objection to drop both options from linaro-base.conf?
I'm not sure what to do with OABI_COMPAT.
Cheers,
--
Fathi Boudra
The maintenance on this server has been completed.
gerrit has been upgraded so it looks a little bit different now.
Also, the sign in process now only works with Linaro Login so clicking on
the "sign in" link no longer requires you to paste an OpenID URL. If you
are not authenticated with Crowd when you click on the "sign in" link, you
will be redirected to Crowd where you need to enter your *email address*
and your Linaro Login password.
If you have any problems with authentication, please email its(a)linaro.org.
Regards
Philip
Hi,
ci.linaro.org has switched the security realm from Launchpad OpenID to
Crowd SSO.
In practice, it means that authentication is using your regular
login/password from login.linaro.org service.
In addition, the project authorization strategy has been switched to
project-based matrix authorization strategy.
Those changes allows more permissions granularity at the project/job level.
It is now possible to create private/restricted jobs or allow
anonymous users to read your job configuration if you want.
Cheers,
--
Fathi Boudra
Builds and Baselines Manager | Release Manager
Linaro.org | Open source software for ARM SoCs
The recent dylan meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.7.inc
update from 13.04 to 13.06-1 seems to cause builds to break with errors
something like:
| cp: cannot create regular file
'/work/rdk/build-dylan-qemuarm/tmp/work/armv5te-rdk-linux-gnueabi/gcc-cross-initial/linaro-4.7-r2013.06-1/image/work/rdk/build-dylan-qemuarm/tmp/sysroots/x86_64-linux/usr/lib/armv5te-rdk-linux-gnueabi.gcc-cross-initial/gcc/arm-rdk-linux-gnueabi/4.7.3/include-fixed/limits.h':
No such file or directory
| ERROR: Function failed: do_install (see
/work/rdk/build-dylan-qemuarm/tmp/work/armv5te-rdk-linux-gnueabi/gcc-cross-initial/linaro-4.7-r2013.06-1/temp/log.do_install.11946
for further information)
Fix by updating BINV from 4.7.3 to 4.7.4 to match the change in gcc versions.
Signed-off-by: Andre McCurdy <andre.mccurdy(a)entropic.com>
---
meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.7.inc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.7.inc b/meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.7.inc
index b0bc7be..a5452be 100644
--- a/meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.7.inc
+++ b/meta-linaro-toolchain/recipes-devtools/gcc/gcc-linaro-4.7.inc
@@ -4,7 +4,7 @@ require gcc-linaro-common-4.7.inc
MMYY = "13.06"
RELEASE = "20${MMYY}-1"
PR = "r${RELEASE}"
-BINV = "4.7.3"
+BINV = "4.7.4"
FILESPATH = "${@base_set_filespath([ '${FILE_DIRNAME}/gcc-${PV}' ], d)}"
--
1.8.1.2
This e-mail and documents attached to this e-mail contain proprietary and/or confidential information of Entropic Communications. Such information is subject to copyright belonging to Entropic Communications. This e-mail is intended solely for the use of the individuals or entities to which it is addressed. If you are not the intended recipient of this e-mail, any distribution, copying or use of the contents of this e-mail and attachments is strictly prohibited and may be unlawful.