linaro-dev

linaro-dev@lists.linaro.org

4332 discussions

[PATCH] sdio: optimized SDIO IRQ handling for single function

by Per Forlin

From: Stefan Nilsson XK <stefan.xk.nilsson(a)stericsson.com> If there is only 1 function registered, and IRQ:s are supported and currently enabled, call the callback handler directly without checking the CCCR registers. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson(a)stericsson.com> Signed-off-by: Per Forlin <per.forlin(a)linaro.org> --- drivers/mmc/core/sdio_irq.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index b300161..25291bf 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -32,6 +32,20 @@ static int process_sdio_pending_irqs(struct mmc_card *card) int i, ret, count; unsigned char pending; + /* + * If there is only 1 function registered + * call irq directly without checking the CCCR registers. + */ + if ((card->host->caps & MMC_CAP_SDIO_IRQ) && + card->host->sdio_irqs && (card->sdio_funcs == 1)) + for (i = 0; i < SDIO_MAX_FUNCS; i++) { + struct sdio_func *func = card->sdio_func[i]; + if (func && func->irq_handler) { + func->irq_handler(func); + return 1; + } + } + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending); if (ret) { printk(KERN_DEBUG "%s: error %d reading SDIO_CCCR_INTx\n", -- 1.7.4.1

14 years, 2 months

[PM] 04/05/2011 - Minutes for the Power Management WG weekly call

by Amit Kucheria

Hi All, The minutes of the very short power management weekly call can be found at : https://wiki.linaro.org/WorkingGroups/PowerManagement/Meetings/2011-05-04 Highlights: 11.11 planning Regards, Amit

14 years, 2 months

[NOTES] 2011-05-04 Android Platform Team Meeting

by Zach Pfeffer

Agenda, action items, status reports and IRC logs at: https://wiki.linaro.org/Platform/Android/Meetings/2011-05-04 Highlights Linaro Android 11.04 release @ https://android-build.linaro.org/index -Zach

14 years, 2 months

[PATCH resend] sdio: optimized SDIO IRQ handling for single function

by Per Forlin

From: Stefan Nilsson XK <stefan.xk.nilsson(a)stericsson.com> If there is only 1 function registered it is possible to improve performance by avoiding the overhead of reading the CCCR registers and directly call the function handler. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson(a)stericsson.com> Signed-off-by: Per Forlin <per.forlin(a)linaro.org> --- drivers/mmc/core/sdio_irq.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index b300161..25291bf 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -32,6 +32,20 @@ static int process_sdio_pending_irqs(struct mmc_card *card) int i, ret, count; unsigned char pending; + /* + * If there is only 1 function registered + * call irq directly without checking the CCCR registers. + */ + if ((card->host->caps & MMC_CAP_SDIO_IRQ) && + card->host->sdio_irqs && (card->sdio_funcs == 1)) + for (i = 0; i < SDIO_MAX_FUNCS; i++) { + struct sdio_func *func = card->sdio_func[i]; + if (func && func->irq_handler) { + func->irq_handler(func); + return 1; + } + } + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending); if (ret) { printk(KERN_DEBUG "%s: error %d reading SDIO_CCCR_INTx\n", -- 1.7.4.1

14 years, 2 months

[NOTES] Minutes & Actions: Kernel Working Group meetings of May 2, 2011

by Mounir Bsaibes

Enclosed you'll find a link to the agenda, minutes, actions and IRC logs from the Linaro kernel working group weekly meetings of May 2 , 2011. https://wiki.linaro.org/WorkingGroups/Kernel/Meetings/2011-05-02 == Summary == * Updates on 11.05 Work Items * Cycle 11.11 LDS sessions setup and ownership Regards, Mounir

14 years, 2 months

Office of CTO meeting minutes

by David Rusling

See https://wiki.linaro.org/OfficeofCTO/2011-05-03. Basically, heads down for LDS next week... Dave David Rusling, CTO http://www.linaro.org Linaro Lockton House Clarendon Rd Cambridge CB2 8FH

14 years, 2 months

plymouth SEGV on Overo with 2.6.39

by AJ ONeal

Every time I boot plymouth is always killed by SEGV Every few reboots the system will hang without continuing to boot at this message: init: udev-fallback-graphics main process (993) terminated with status 1 init: plymouth main process (538) killed by SEGV signal init: plymouth-splash main process (998) terminated with status 2 init: plymouth-log main process (1026) terminated with status 1 Sometimes the system will hang during reboot as well, I think it may be related to `plymouth-stop`, but I don't have strong evidence of that currently. My kernel config has only very minimal changes from `omap2plus_defconfig` - enabling devtmpfs and automounting it - disabling omap2, omap4, etc, except omap3 - disabling all boards except for overo I don't think that plymouth is a particularly necessary service (especially since I don't have a display), so my temporary solution is to disable it like so: cd /etc/init ls plymouth*.conf | while read CONF do mv ${CONF} ${CONF}.off done Can anyone offer me any suggestions? AJ ONeal

14 years, 2 months

Linaro Image Tools 0.4.4 released

by Mattias Backman

On behalf of the Linaro Infrastructure team I'm pleased to announce the release of Linaro Image Tools 0.4.4. Linaro Image Tools offer a set of tools for use with Linaro images. Highlights of this release: * Support for EfikaMX boards has been added * Support for i.MX53 LOCO board has been added * Support for SMDKV310 board has been added * Usage of sudo has been made optional * Changes to partition alignment * The original boot script is stored in the boot partition * Improvements to the btrfs support * Support for multiple kernel have been added, in particular for i.MX53, i.MX51 and OMAP4; also properly fixes U8500 * RAM size on Panda has been increased * Support for device tree binaries has been added The source tarball is available from: https://launchpad.net/linaro-image-tools/trunk/0.4.4 Thanks, Mattias Backman

14 years, 2 months

LTP test result collecting

by Shawn Guo

I'm drafting the blueprint [1], and need your favors to collect LTP (Linux Test Project [2]) result on boards that Linaro supports with Natty kernel running on. The example steps of the testing (I did on i.mx51 babbage with Beta-2 linaro-n-developer) are documented on Whiteboard of [1]. Please help run the test on the boards you have except i.mx51, and send me the result. I appreciate the effort. [1] https://blueprints.launchpad.net/linux-linaro/+spec/linaro-kernel-o-ras-fix… [2] http://ltp.sourceforge.net/ -- Regards, Shawn

14 years, 2 months

Greetings!

by Deepak Saxena

Hello all, I want to introduce myself to the linaro-kernel and linaro-dev lists as I just started at Linaro today in the role of Kernel Working Group Technical Lead and will be working closely with all of you on enhancing the ARM Linux ecosystem. I've been using Linux since 1993 and working with the Linux kernel for over 10 years for a variety of companies including silicon vendors, OSVs, and device vendors with a broad variety of experience including ARM CPU and board bring up, hacking on a variety of device drivers, maintaining a distro kernel, maintaining a few ARM sub-architectures, educating HW vendors and new developers about the open source development model, etc. I've been a bit out of the loop of the open source community the last 1-2 years and am really excited to be involved with Linaro working on community-focused technology enablement and enhancement. I expect this first week to be mostly focused on reading up on process, existing deliverables, mailing list archives, etc to wrap my head around where we are right now and where we're headed with the 11.11 release. I'll be at LDS and look forward to meeting many of you next week and I want to encourage anyone who won't be at LDS but has concerns, ideas, questions related to the kernel WG to drop me an email. Thanks! ~Deepak

14 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev