linaro-dev

linaro-dev@lists.linaro.org

4332 discussions

Linaro Android 11.09 PoC's for the 26th, 27th and 28th Reminder

by Zach Pfeffer

Here's out lineup. If anyone runs into trouble with the Linaro Android release, these people are here to help: These people will be on IRC during the times listed. 26th 0 - 8.5 UTC Botao (botao-sun) 8 - 16.5 UTC Bero (bero) 16 - 0.5 UTC Mathieu (mpoirier) 27th 0 - 8.5 UTC Vishal (bhoj) 8 - 16.5 UTC Bero, Botao 16 - 0.5 UTC Zach (pfefferz) 28th 0 - 8.5 UTC Botao 8 - 16.5 UTC Patrik (patrikryd) 16 - 0.5 UTC Zach Thanks again to those who volunteered, lets have a great release! -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years, 1 month

Heads up: Manifest names have changed in linaro_android_2.3.5 and linaro-android-11.09-release

by Zach Pfeffer

Team, I'm modifying the builds and the manifests to use the term staging instead of LEB. All the tip builds have been switched over. I've turned off build everyday for the LEB- versions. Each of the new builds will have build everyday set. -Zach -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years, 1 month

[Patch v3 08/11] Touch: DA9052 touchscreen driver

by ashishj3

This driver add support for DA9052 4-wire resistive ADC interfaced touchscreen controller. DA9052 is a MFD therefore this driver depends on DA9052 core driver for core functionalities. Signed-off-by: David Dajun Chen <dchen(a)diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam(a)kpitcummins.com> --- Changes since v3: - Remove unrequire type cast - Prefix init code with _devinit - Remove check for workqueue reschedule - tsi_close() to wait for datardy intr completion - Remove seperate workqueue - Move cancel_work_sync to tsi_close() - Check for drv data before tsi priv data allocation Changes since v2: - Replace kthreads with workqueue - Remove kfifos - Taken care for bus type - Replace da9052_set/clear function with da9052_reg_update - Add open and close functionality --- drivers/input/touchscreen/Kconfig | 7 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/da9052_tsi.c | 369 ++++++++++++++++++++++++++++++++ 3 files changed, 377 insertions(+), 0 deletions(-) create mode 100755 drivers/input/touchscreen/da9052_tsi.c diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index cabd9e5..a5d2e7b 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -144,6 +144,13 @@ config TOUCHSCREEN_DA9034 Say Y here to enable the support for the touchscreen found on Dialog Semiconductor DA9034 PMIC. +config TOUCHSCREEN_DA9052 + tristate "Dialog DA9052 TSI" + depends on PMIC_DA9052 + help + Say y here to support the touchscreen found on + Dialog Semiconductor DA9052 PMIC + config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 282d6f7..a4aeb25 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o +obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c new file mode 100755 index 0000000..0897340 --- /dev/null +++ b/drivers/input/touchscreen/da9052_tsi.c @@ -0,0 +1,369 @@ +/* + * TSI driver for Dialog DA9052 + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/module.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <linux/mfd/da9052/reg.h> +#include <linux/mfd/da9052/da9052.h> + +#define TSI_PEN_DOWN_STATUS 0x40 + +struct da9052_tsi_reg { + u16 x; + u16 y; + u16 z; +}; + +struct da9052_tsi { + struct da9052 *da9052; + struct input_dev *dev; + struct delayed_work ts_pen_work; + int irq_pendwn; + int irq_datardy; +}; + +static int da9052_ts_start(struct da9052_tsi *tsi) +{ + return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, + 1 << 0, 1 << 0); +} + +static int da9052_ts_stop(struct da9052_tsi *tsi) +{ + return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 0, 0); +} + +static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data) +{ + struct da9052_tsi *tsi = data; + struct da9052 *da9052 = tsi->da9052; + int ret; + + /* Mask PEN_DOWN event and unmask TSI_READY event */ + da9052->events_mask |= DA9052_E_PEN_DOWN; + da9052->events_mask &= ~DA9052_E_TSI_READY; + ret = da9052_reg_update(da9052, DA9052_IRQ_MASK_B_REG, 0x80, 0x40); + if (ret < 0) + return IRQ_NONE; + + da9052_ts_start(tsi); + + input_report_key(tsi->dev, BTN_TOUCH, 1); + input_sync(tsi->dev); + + return IRQ_HANDLED; +} + +static int da9052_ts_read(struct da9052_tsi *tsi) +{ + struct da9052_tsi_reg co_ord = {0, 0, 0}; + int ret; + uint8_t _x, _y, _z, _v; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_X_MSB_REG); + if (ret < 0) + return ret; + + _x = (uint8_t) ret; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Y_MSB_REG); + if (ret < 0) + return ret; + + _y = (uint8_t) ret; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Z_MSB_REG); + if (ret < 0) + return ret; + + _z = (uint8_t) ret; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG); + if (ret < 0) + return ret; + + _v = (uint8_t) ret; + + co_ord.x = ((_x << 2) & 0x3fc) | (_v & 0x3); + co_ord.y = ((_y << 2) & 0x3fc) | ((_v & 0xc) >> 2); + co_ord.z = ((_z << 2) & 0x3fc) | ((_v & 0x30) >> 4); + + input_report_abs(tsi->dev, ABS_X, co_ord.x); + input_report_abs(tsi->dev, ABS_Y, co_ord.y); + input_report_abs(tsi->dev, ABS_PRESSURE, co_ord.z); + input_report_key(tsi->dev, BTN_TOUCH, 1); + input_sync(tsi->dev); + + return 0; +} + +static irqreturn_t da9052_ts_datardy_irq(int irq, void *data) +{ + struct da9052_tsi *tsi = data; + + da9052_ts_read(tsi); + schedule_delayed_work(&tsi->ts_pen_work, HZ/50); + return IRQ_HANDLED; +} + +static void da9052_ts_pen_work(struct work_struct *work) +{ + struct da9052_tsi *tsi = container_of(work, struct da9052_tsi, + ts_pen_work.work); + struct input_dev *ip_dev = tsi->dev; + struct da9052 *da9052 = tsi->da9052; + int ret; + + ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG); + if (ret < 0) + return; + + if (ret & TSI_PEN_DOWN_STATUS) /* Pen Down */ + schedule_delayed_work(&tsi->ts_pen_work, HZ/50); + else { + /* Pen UP */ + da9052_ts_stop(tsi); + + /* Unmask PEN_DOWN event */ + da9052->events_mask &= ~DA9052_E_PEN_DOWN; + da9052_reg_update(da9052, DA9052_IRQ_MASK_B_REG, 0x40, 0); + + /* Report Pen UP */ + input_report_abs(ip_dev, ABS_PRESSURE, 0); + input_report_key(ip_dev, BTN_TOUCH, 0); + input_sync(ip_dev); + } +} + +static int __devinit da9052_ts_configure_gpio(struct da9052 *da9052) +{ + int ret; + + ret = da9052_reg_update(da9052, DA9052_GPIO_2_3_REG, 0x30, 0); + if (ret < 0) + return ret; + + ret = da9052_reg_update(da9052, DA9052_GPIO_4_5_REG, 0x33, 0); + if (ret < 0) + return ret; + + ret = da9052_reg_update(da9052, DA9052_GPIO_6_7_REG, 0x33, 0); + + return ret; +} + +static int __devinit da9052_configure_tsi(struct da9052_tsi *tsi) +{ + ssize_t ret; + struct da9052 *da9052 = tsi->da9052; + + ret = da9052_ts_configure_gpio(tsi->da9052); + if (ret < 0) + return ret; + + /* Measure TSI sample every 1ms */ + ret = da9052_reg_update(tsi->da9052, DA9052_ADC_CONT_REG, + 1 << 6, 1 << 6); + if (ret < 0) + return ret; + + /* TSI_DELAY: 3 slots, TSI_SKIP: 0 slots, TSI_MODE: XYZP */ + ret = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 0xFC, 0xC0); + if (ret < 0) + return ret; + + /* Mask TSI_READY event */ + da9052->events_mask |= DA9052_E_TSI_READY; + ret = da9052_reg_update(da9052, DA9052_IRQ_MASK_B_REG, 0, 0x80); + if (ret < 0) + return ret; + + /*Supply TSIRef through LD09 */ + ret = da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x59); + + return ret; +} + +static int da9052_ts_input_open(struct input_dev *input_dev) +{ + struct da9052_tsi *tsi = input_get_drvdata(input_dev); + + /* Enable Pen Detect Circuit */ + return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, + 1 << 1, 1 << 1); +} + +static void da9052_ts_input_close(struct input_dev *input_dev) +{ + struct da9052_tsi *tsi = input_get_drvdata(input_dev); + + cancel_delayed_work_sync(&tsi->ts_pen_work); + + da9052_ts_stop(tsi); + + /* Disable Pen Detect Circuit */ + da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0); +} + +static int __devinit da9052_ts_probe(struct platform_device *pdev) +{ + struct da9052_tsi *tsi; + struct input_dev *input_dev; + struct da9052 *da9052; + int ret; + + da9052 = dev_get_drvdata(pdev->dev.parent); + if (da9052 == NULL) + return -EINVAL; + + tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL); + if (!tsi) + return -ENOMEM; + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(tsi->da9052->dev, "Failed to allocate input device\n"); + ret = -ENOMEM; + goto err_mem; + } + + INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work); + + tsi->da9052 = da9052; + + input_dev->id.version = 0x0101; + input_dev->id.vendor = 0x15B6; + input_dev->id.product = 0x9052; + input_dev->id.bustype = tsi->da9052->bustype; + input_dev->name = "Dialog DA9052 TouchScreen Driver"; + input_dev->dev.parent = &pdev->dev; + input_dev->open = da9052_ts_input_open; + input_dev->close = da9052_ts_input_close; + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + __set_bit(ABS_PRESSURE, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1023, 0, 0); + + tsi->dev = input_dev; + input_set_drvdata(input_dev, tsi); + + tsi->irq_pendwn = platform_get_irq_byname(pdev, "PENDWN"); + if (tsi->irq_pendwn < 0) { + ret = tsi->irq_pendwn; + goto err_input; + } + + ret = request_threaded_irq(tsi->da9052->irq_base + tsi->irq_pendwn, + NULL, da9052_ts_pendwn_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "PENDWN", tsi); + if (ret < 0) { + dev_err(tsi->da9052->dev, + "Failed to register %s IRQ %d, error = %d\n", "PENDWN", + tsi->da9052->irq_base + tsi->irq_pendwn, ret); + goto err_input; + } + + tsi->irq_datardy = platform_get_irq_byname(pdev, "TSIRDY"); + if (tsi->irq_datardy < 0) { + ret = tsi->irq_datardy; + goto err_pendwn_irq; + } + + ret = request_threaded_irq(tsi->da9052->irq_base + tsi->irq_datardy, + NULL, da9052_ts_datardy_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "TSIRDY", tsi); + if (ret < 0) { + dev_err(tsi->da9052->dev, + "Failed to register %s IRQ %d, error = %d\n", "TSIRDY", + tsi->da9052->irq_base + tsi->irq_datardy, ret); + goto err_pendwn_irq; + } + + ret = da9052_configure_tsi(tsi); + if (ret < 0) + goto err_datardy_irq; + + ret = input_register_device(tsi->dev); + if (ret < 0) + goto err_datardy_irq; + + platform_set_drvdata(pdev, tsi); + + return 0; + +err_datardy_irq: + free_irq(tsi->da9052->irq_base + tsi->irq_datardy, tsi); +err_pendwn_irq: + free_irq(tsi->da9052->irq_base + tsi->irq_pendwn, tsi); +err_input: + input_free_device(input_dev); +err_mem: + kfree(tsi); + return ret; +} + +static int __devexit da9052_ts_remove(struct platform_device *pdev) +{ + struct da9052_tsi *tsi = platform_get_drvdata(pdev); + + da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19); + + free_irq(tsi->da9052->irq_base + tsi->irq_pendwn, tsi); + free_irq(tsi->da9052->irq_base + tsi->irq_datardy, tsi); + + input_unregister_device(tsi->dev); + + platform_set_drvdata(pdev, NULL); + + kfree(tsi); + + return 0; +} + +static struct platform_driver da9052_tsi_driver = { + + .probe = da9052_ts_probe, + .remove = __devexit_p(da9052_ts_remove), + .driver = { + .name = "da9052-tsi", + .owner = THIS_MODULE, + }, +}; + +static int __init da9052_ts_init(void) +{ + return platform_driver_register(&da9052_tsi_driver); +} +module_init(da9052_ts_init); + +static void __exit da9052_ts_exit(void) +{ + platform_driver_unregister(&da9052_tsi_driver); +} +module_exit(da9052_ts_exit); + +MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9052"); +MODULE_AUTHOR("David Dajun Chen <dchen(a)diasemi.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-tsi");

14 years, 1 month

linaro-image-tools_2011.08-1_amd64.changes ACCEPTED into unstable

by Debian FTP Masters

Accepted: linaro-image-tools_2011.08-1.debian.tar.gz to main/l/linaro-image-tools/linaro-image-tools_2011.08-1.debian.tar.gz linaro-image-tools_2011.08-1.dsc to main/l/linaro-image-tools/linaro-image-tools_2011.08-1.dsc linaro-image-tools_2011.08-1_all.deb to main/l/linaro-image-tools/linaro-image-tools_2011.08-1_all.deb linaro-image-tools_2011.08.orig.tar.gz to main/l/linaro-image-tools/linaro-image-tools_2011.08.orig.tar.gz python-linaro-image-tools_2011.08-1_all.deb to main/l/linaro-image-tools/python-linaro-image-tools_2011.08-1_all.deb Override entries for your package: linaro-image-tools_2011.08-1.dsc - optional devel linaro-image-tools_2011.08-1_all.deb - optional devel python-linaro-image-tools_2011.08-1_all.deb - optional python Announcing to debian-devel-changes(a)lists.debian.org Closing bugs: 641951 Thank you for your contribution to Debian.

14 years, 1 month

[Activity] Power Management WG Weekly Status report for week ending 2011-09-23

by Mounir Bsaibes

Enclosed please find the link to the Weekly Status report for the Power Management working group for the week ending 2011-09-23 == Meeting Minutes == https://wiki.linaro.org/WorkingGroups/PowerManagement/Meetings/2011-09-21 == Weekly Status Report == https://wiki.linaro.org/WorkingGroups/PowerManagement/Status/2011-09-22 == Summary == (For details, see the Weekly Status Report and Meeting Minutes ) * Released pm-qa-0.1.2 * Released powerdebug-0.6.0 * Updated PMWG consolidated kernel tree * Study Idle Load Balancing (ILB) impact on power saving * Performed tests on Linaro platforms with default configuration (sched_mc mode) * Fixed a crash in samsung platform with sched_mc enabled. Need to get it reviewed. * Conducted common clock call with key stakeholders as a follow up to LPC discussion * Submitted version 2 of an imx cpuidle driver. Best regards, Mounir -- Mounir Bsaibes Project Manager Follow Linaro.org: facebook.com/pages/Linaro/155974581091106 http://twitter.com/#!/linaroorg http://www.linaro.org/linaro-blog <http://www.linaro.org/linaro-blog>

14 years, 1 month

[Activity] Kernel WG Weekly Status report for week ending 2011-09-23

by Mounir Bsaibes

Enclosed please find the link to the Weekly Status report for the kernel working group for the week ending 2011-09-23 == Meeting Minutes == https://wiki.linaro.org/WorkingGroups/Kernel/Meetings/2011-09-19 == Weekly Status Report == https://wiki.linaro.org/WorkingGroups/Kernel/Status/2011-09-22 == Summary == (For more details, refer to the Weekly Status and Meeting Minutes) * Released linux-linaro-3.0-2011.09-0 * Released linux-linaro-3.0-2011.09-0-android-1 * Fixed second SPI initialization call on Dove * Posted latest incarnation of the zImage DTB appending patch series * Posted initial patch series for the vmalloc.h removal * 3.1 queue of fixes for RTC/AlarmTimers was merged into mainline * 3.2 queue of alarmtimer fixes has been merged into -tip * Sent out patches to fix boot-parameters for MMC fault injection with help from Akinobu Mita (mmc: add module param to set fault injection attributes) * Submitted pinmux/pin control framework seventh version, codenamed Janitor, http://marc.info/?l=linux-kernel&m=131617524205706&w=2 * [ i.MX6Q] Submitted v2 of imx6q patch series with comments on v1 addressed, and rebased to v3.1-rc6. * Rebased imx6q patch series to Rob's latest GIC binding patches. * Tested nico's zImage-dtb-append patch series on imx6q. * Posted the patches for imx6q fec, gpio and usdhc initial support. * [ Exynos4] Submitted third version of dt support for Exynos4 keypad controller driver with changes suggested by Grant. * Submitted third version of i2c device tree patches. Ben Dooks has merged these patches to his tree * Submitted fourth version of pl330 dma controller DT support patches with changes suggested by Grant. * Submitted second version of patches to remove cfg_card helper callback from sdhci-s3c driver. Best Regards, Mounir -- Mounir Bsaibes Project Manager Follow Linaro.org: facebook.com/pages/Linaro/155974581091106 http://twitter.com/#!/linaroorg http://www.linaro.org/linaro-blog <http://www.linaro.org/linaro-blog>

14 years, 1 month

[ACTIVITY] Developer Platform status report (2011-09-16 to 2011-09-22)

by David Zinman

Enclosed, please find a link to the Weekly Status report from the Developer Platform team for 2011-09-16 to 2011-09-22 period. == Weekly Status Report and Meeting Minutes == https://wiki.linaro.org/Platform/DevPlatform/Status/2011-09-23 https://wiki.linaro.org/Platform/DevPlatform/Meetings/2011-09-22 == Team Highlights == * Linaro q4.11 planning is ongoing. * TSC output will be communicated to the team. * 11.10 release cycle * CI * Toolchain integration * kernel/u-boot * more... * images are working as they were last week * Updates are coming soon * l-i-t should be ready to go this week barring any unexptected bugs * hwpacks v2 should follow -> should l-i-t not be released, hwpacks v2 will be held back until next release. * RC Images will be tested by everyone. === Work Items === * tgall-foo: * libjpeg-turbo has been tested and pushed upstream * ljt release imminent * aviksil: patch for thumb2 fix accepted * wookie: fixed xdeb * rsalveti: * kernel and u-boot fixes * reviewing libjpeg-turbo * setting up hardware package v2 * hrw: gcc-linaro native built on amd64/i386/armel == Risks / Issues == * n/a == Miscellaneous == * n/a -- David Zinman Linaro Release Manager | Project Manager Linaro.org | Open source software for ARM SoCs

14 years, 1 month

Linaro Document

by tommy.hong

Hi,folks,are there some Linaro Document which used for developer? B.R Tommy@China

14 years, 1 month

11.09 Snapshot Linaro+Android Baseline Release

by John Stultz

Just wanted to announce the availability of the September 2011 Linaro/Android baseline development snapshot: linux-linaro-3.0-2011.09-0-android-1 This is based on the linux-linaro-3.0-2011.09-0 kernel + the upstream Android branch from Google, and provides the base kernel tree that LT android trees can use. This baseline can be found via git here: http://android.git.linaro.org/gitweb?p=kernel/linaro-android.git;a=summary thanks -john

14 years, 1 month

Improvements to kernel deb-pkg target for continuous integration

by James Westby

Hi, Here are two patches that are needed for the kernel CI effort. I would appreciate reviews on my first kernel patches to be submitted, and guidance for where to send them to get them accepted upstream. Needed in order to run the target when cross-building. Needed in order to stop jobs in the CI system from overwriting each others files. Thanks, James

14 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev