linaro-dev September 2012

linaro-dev@lists.linaro.org

84 participants
100 discussions

[PATCH] mfd: Implement devicetree support for AB8500 fg

by Rajanikanth H.V

From: "Rajanikanth H.V" <rajanikanth.hv(a)stericsson.com> This patch adds device tree support for fuel guage driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv(a)stericsson.com> --- Documentation/devicetree/bindings/mfd/ab8500.txt | 8 +- .../devicetree/bindings/power_supply/ab8500/fg.txt | 86 ++++ arch/arm/boot/dts/dbx5x0.dtsi | 22 +- drivers/mfd/ab8500-core.c | 1 + drivers/power/Makefile | 2 +- drivers/power/ab8500_bmdata.c | 454 ++++++++++++++++++++ drivers/power/ab8500_fg.c | 169 +++++++- include/linux/mfd/abx500.h | 7 +- include/linux/mfd/abx500/ab8500-bm.h | 7 + 9 files changed, 731 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/fg.txt create mode 100644 drivers/power/ab8500_bmdata.c diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index ce83c8d..762dc11 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -24,7 +24,13 @@ ab8500-bm : : : Battery Manager ab8500-btemp : : : Battery Temperature ab8500-charger : : : Battery Charger ab8500-codec : : : Audio Codec -ab8500-fg : : : Fuel Gauge +ab8500-fg : : vddadc : Fuel Gauge + : NCONV_ACCU : : Accumulate N Sample Conversion + : BATT_OVV : : Battery Over Voltage + : LOW_BAT_F : : LOW threshold battery voltage + : CC_INT_CALIB : : Counter Counter Internal Calibration + : CCEOC : : Coulomb Counter End of Conversion + : : : ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : ab8500-gpio : : : GPIO Controller diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt b/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt new file mode 100644 index 0000000..c576558 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt @@ -0,0 +1,86 @@ +=== AB8500 Fuel Gauge Driver === + +AB8500 is a mixed signal multimedia and power management +device comprising: power and energy-management-module, +wall-charger, usb-charger, audio codec, general purpose adc, +tvout, clock management and sim card interface. + +Fuel-guage support is part of energy-management-module, the other +components of this module are: +main-charger, usb-combo-charger and Battery temperature monitoring. + +The properties below describes the node for fuel guage driver. + +Required Properties: +- compatible = "stericsson,ab8500-fg" +- interface-name: + Name of the controller/driver which is part of energy-management-module +- supplied-to: + This property shall have dependent nodes which represent other + energy-management-module. + This is a logical binding w.r.t power supply events + across energy-management-module drivers where-in, the + runtime battery properties are shared along with uevent + notification. + ref: di->fg.external_power_changed = + ab8500_fg_external_power_changed; + ab8500_fg.c + + Need for this property: + energy-management-module driver updates power-supply properties + which are subset of events listed in 'enum power_supply_property', + ref: power_supply.h file + Event handler invokes power supply change notifier + which in-turn invokes registered power supply class call-back + based on the 'supplied-to' string. + ref: + power_supply_changed_work(..) ./drivers/power/power_supply_core.c + di->fg_psy.external_power_changed + + example: + ab8500-fg { + /* Other enery management module */ + supplied-to = <&ab8500_chargalg &ab8500_usb>; + }; + + ab8500_battery_info: ab8500_bat_type { + battery-type = <2>; + thermistor-on-batctrl = <1>; + }; + +Other dependent node for fuel-gauge is: + ab8500_battery_info: ab8500_bat_type { + }; + This node will provide information on 'thermistor interface' and + 'battery technology type' used. + +Properties of this node are: +thermistor-on-batctrl: + A boolean value indicating thermistor interface to battery + + Note: + 'btemp' and 'batctrl' are the pins interfaced for battery temperature + measurement, 'btemp' signal is used when NTC(negative temperature + coefficient) resister is interfaced external to battery whereas + 'batctrl' pin is used when NTC resister is internal to battery. + + e.g: + ab8500_battery_info: ab8500_bat_type { + thermistor-on-batctrl; + }; + indiactes: NTC resister is internal to battery, 'batctrl' is used + for thermal measurement. + + The absence of property 'thermal-on-batctrl' indicates + NTC resister is external to battery and 'btemp' signal is used + for thermal measurement. + +battery-type: + This shall be the battery manufacturing technology type, + allowed types are: + "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn" + e.g: + ab8500_battery_info: ab8500_bat_type { + battery-name = "LION"; + } + diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 748ba7a..22f38b8 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -352,8 +352,28 @@ vddadc-supply = <&ab8500_ldo_tvout_reg>; }; - ab8500-usb { + ab8500_battery_info: ab8500_bat_type { + battery-name = "LION"; + thermistor-on-batctrl; + }; + + ab8500_chargalg: ab8500_chalg { + compatible = "stericsson,ab8500-chargalg"; + interface-name = "ab8500_chargalg"; + battery-info = <&ab8500_battery_info>; + supplied-to = <&ab8500_fuel_guage>; + }; + + ab8500_fuel_guage: ab8500_fg { + compatible = "stericsson,ab8500-fg"; + interface-name = "ab8500_fg"; + battery-info = <&ab8500_battery_info>; + supplied-to = <&ab8500_chargalg &ab8500_usb>; + }; + + ab8500_usb: ab8500_usb_if { compatible = "stericsson,ab8500-usb"; + interface-name = "ab8500_usb"; interrupts = < 90 0x4 96 0x4 14 0x4 diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 1667c77..6c3d7c2 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1051,6 +1051,7 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = { }, { .name = "ab8500-fg", + .of_compatible = "stericsson,ab8500-fg", .num_resources = ARRAY_SIZE(ab8500_fg_resources), .resources = ab8500_fg_resources, }, diff --git a/drivers/power/Makefile b/drivers/power/Makefile index ee58afb..2c58d4e 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o -obj-$(CONFIG_AB8500_BM) += ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o +obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c new file mode 100644 index 0000000..1333650 --- /dev/null +++ b/drivers/power/ab8500_bmdata.c @@ -0,0 +1,454 @@ +#include <linux/export.h> +#include <linux/power_supply.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500/ab8500-bm.h> + +/* + * These are the defined batteries that uses a NTC and ID resistor placed + * inside of the battery pack. + * Note that the res_to_temp table must be strictly sorted by falling resistance + * values to work. + */ +static struct abx500_res_to_temp temp_tbl_A_thermistor[] = { + {-5, 53407}, + { 0, 48594}, + { 5, 43804}, + {10, 39188}, + {15, 34870}, + {20, 30933}, + {25, 27422}, + {30, 24347}, + {35, 21694}, + {40, 19431}, + {45, 17517}, + {50, 15908}, + {55, 14561}, + {60, 13437}, + {65, 12500}, +}; +static struct abx500_res_to_temp temp_tbl_B_thermistor[] = { + {-5, 165418}, + { 0, 159024}, + { 5, 151921}, + {10, 144300}, + {15, 136424}, + {20, 128565}, + {25, 120978}, + {30, 113875}, + {35, 107397}, + {40, 101629}, + {45, 96592}, + {50, 92253}, + {55, 88569}, + {60, 85461}, + {65, 82869}, +}; +static struct abx500_v_to_cap cap_tbl_A_thermistor[] = { + {4171, 100}, + {4114, 95}, + {4009, 83}, + {3947, 74}, + {3907, 67}, + {3863, 59}, + {3830, 56}, + {3813, 53}, + {3791, 46}, + {3771, 33}, + {3754, 25}, + {3735, 20}, + {3717, 17}, + {3681, 13}, + {3664, 8}, + {3651, 6}, + {3635, 5}, + {3560, 3}, + {3408, 1}, + {3247, 0}, +}; +static struct abx500_v_to_cap cap_tbl_B_thermistor[] = { + {4161, 100}, + {4124, 98}, + {4044, 90}, + {4003, 85}, + {3966, 80}, + {3933, 75}, + {3888, 67}, + {3849, 60}, + {3813, 55}, + {3787, 47}, + {3772, 30}, + {3751, 25}, + {3718, 20}, + {3681, 16}, + {3660, 14}, + {3589, 10}, + {3546, 7}, + {3495, 4}, + {3404, 2}, + {3250, 0}, +}; + +static struct abx500_v_to_cap cap_tbl[] = { + {4186, 100}, + {4163, 99}, + {4114, 95}, + {4068, 90}, + {3990, 80}, + {3926, 70}, + {3898, 65}, + {3866, 60}, + {3833, 55}, + {3812, 50}, + {3787, 40}, + {3768, 30}, + {3747, 25}, + {3730, 20}, + {3705, 15}, + {3699, 14}, + {3684, 12}, + {3672, 9}, + {3657, 7}, + {3638, 6}, + {3556, 4}, + {3424, 2}, + {3317, 1}, + {3094, 0}, +}; + +/* + * Note that the res_to_temp table must be strictly sorted by falling + * resistance values to work. + */ +static struct abx500_res_to_temp temp_tbl[] = { + {-5, 214834}, + { 0, 162943}, + { 5, 124820}, + {10, 96520}, + {15, 75306}, + {20, 59254}, + {25, 47000}, + {30, 37566}, + {35, 30245}, + {40, 24520}, + {45, 20010}, + {50, 16432}, + {55, 13576}, + {60, 11280}, + {65, 9425}, +}; + +/* + * Note that the batres_vs_temp table must be strictly sorted by falling + * temperature values to work. + */ +struct batres_vs_temp temp_to_batres_tbl_thermistor[] = { + { 40, 120}, + { 30, 135}, + { 20, 165}, + { 10, 230}, + { 00, 325}, + {-10, 445}, + {-20, 595}, +}; + +/* + * Note that the batres_vs_temp table must be strictly sorted by falling + * temperature values to work. + */ +struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = { + { 60, 300}, + { 30, 300}, + { 20, 300}, + { 10, 300}, + { 00, 300}, + {-10, 300}, + {-20, 300}, +}; +EXPORT_SYMBOL(temp_to_batres_tbl_ext_thermistor); + +/* battery resistance table for LI ION 9100 battery */ +struct batres_vs_temp temp_to_batres_tbl_9100[] = { + { 60, 180}, + { 30, 180}, + { 20, 180}, + { 10, 180}, + { 00, 180}, + {-10, 180}, + {-20, 180}, +}; +EXPORT_SYMBOL(temp_to_batres_tbl_9100); + +struct abx500_battery_type bat_type_thermistor[] = { +[BATTERY_UNKNOWN] = { + /* First element always represent the UNKNOWN battery */ + .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, + .resis_high = 0, + .resis_low = 0, + .battery_resistance = 300, + .charge_full_design = 612, + .nominal_voltage = 3700, + .termination_vol = 4050, + .termination_curr = 200, + .recharge_vol = 3990, + .normal_cur_lvl = 400, + .normal_vol_lvl = 4100, + .maint_a_cur_lvl = 400, + .maint_a_vol_lvl = 4050, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 400, + .maint_b_vol_lvl = 4000, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, +}, +{ + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 53407, + .resis_low = 12500, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3600, + .termination_vol = 4150, + .termination_curr = 80, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor), + .r_to_t_tbl = temp_tbl_A_thermistor, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor), + .v_to_cap_tbl = cap_tbl_A_thermistor, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + +}, +{ + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 165418, + .resis_low = 82869, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3600, + .termination_vol = 4150, + .termination_curr = 80, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor), + .r_to_t_tbl = temp_tbl_B_thermistor, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor), + .v_to_cap_tbl = cap_tbl_B_thermistor, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, +}, +}; +EXPORT_SYMBOL(bat_type_thermistor); + +struct abx500_battery_type bat_type_ext_thermistor[] = { +[BATTERY_UNKNOWN] = { + /* First element always represent the UNKNOWN battery */ + .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, + .resis_high = 0, + .resis_low = 0, + .battery_resistance = 300, + .charge_full_design = 612, + .nominal_voltage = 3700, + .termination_vol = 4050, + .termination_curr = 200, + .recharge_vol = 3990, + .normal_cur_lvl = 400, + .normal_vol_lvl = 4100, + .maint_a_cur_lvl = 400, + .maint_a_vol_lvl = 4050, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 400, + .maint_b_vol_lvl = 4000, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, +}, +/* + * These are the batteries that doesn't have an internal NTC resistor to measure + * its temperature. The temperature in this case is measure with a NTC placed + * near the battery but on the PCB. + */ +{ + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 76000, + .resis_low = 53000, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, +}, +{ + .name = POWER_SUPPLY_TECHNOLOGY_LION, + .resis_high = 30000, + .resis_low = 10000, + .battery_resistance = 300, + .charge_full_design = 950, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, +}, +{ + .name = POWER_SUPPLY_TECHNOLOGY_LION, + .resis_high = 95000, + .resis_low = 76001, + .battery_resistance = 300, + .charge_full_design = 950, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_vol = 4130, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, +}, +}; +EXPORT_SYMBOL(bat_type_ext_thermistor); + +static const struct abx500_bm_capacity_levels cap_levels = { + .critical = 2, + .low = 10, + .normal = 70, + .high = 95, + .full = 100, +}; + +static const struct abx500_fg_parameters fg = { + .recovery_sleep_timer = 10, + .recovery_total_time = 100, + .init_timer = 1, + .init_discard_time = 5, + .init_total_time = 40, + .high_curr_time = 60, + .accu_charging = 30, + .accu_high_curr = 30, + .high_curr_threshold = 50, + .lowbat_threshold = 3100, + .battok_falling_th_sel0 = 2860, + .battok_raising_th_sel1 = 2860, + .user_cap_limit = 15, + .maint_thres = 97, +}; + +static const struct abx500_maxim_parameters maxi_params = { + .ena_maxi = true, + .chg_curr = 910, + .wait_cycles = 10, + .charger_curr_step = 100, +}; + +static const struct abx500_bm_charger_parameters chg = { + .usb_volt_max = 5500, + .usb_curr_max = 1500, + .ac_volt_max = 7500, + .ac_curr_max = 1500, +}; + +struct abx500_bm_data ab8500_bm_data = { + .temp_under = 3, + .temp_low = 8, + .temp_high = 43, + .temp_over = 48, + .main_safety_tmr_h = 4, + .temp_interval_chg = 20, + .temp_interval_nochg = 120, + .usb_safety_tmr_h = 4, + .bkup_bat_v = BUP_VCH_SEL_2P6V, + .bkup_bat_i = BUP_ICH_SEL_150UA, + .no_maintenance = false, + .adc_therm = ABx500_ADC_THERM_BATCTRL, + .chg_unknown_bat = false, + .enable_overshoot = false, + .fg_res = 100, + .cap_levels = &cap_levels, + .bat_type = bat_type_thermistor, + .n_btypes = 3, + .batt_id = 0, + .interval_charging = 5, + .interval_not_charging = 120, + .temp_hysteresis = 3, + .gnd_lift_resistance = 34, + .maxi = &maxi_params, + .chg_params = &chg, + .fg_params = &fg, +}; +EXPORT_SYMBOL(ab8500_bm_data); diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index bf02225..0f6578c 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -22,15 +22,15 @@ #include <linux/platform_device.h> #include <linux/power_supply.h> #include <linux/kobject.h> -#include <linux/mfd/abx500/ab8500.h> -#include <linux/mfd/abx500.h> #include <linux/slab.h> -#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/of.h> #include <linux/delay.h> -#include <linux/mfd/abx500/ab8500-gpadc.h> -#include <linux/mfd/abx500.h> #include <linux/time.h> #include <linux/completion.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> #define MILLI_TO_MICRO 1000 #define FG_LSB_IN_MA 1627 @@ -544,14 +544,14 @@ cc_err: ret = abx500_set_register_interruptible(di->dev, AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU, SEC_TO_SAMPLE(10)); - if (ret) + if (ret < 0) goto fail; /* Start the CC */ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, AB8500_RTC_CC_CONF_REG, (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA)); - if (ret) + if (ret < 0) goto fail; } else { di->turn_off_fg = false; @@ -2429,7 +2429,6 @@ static int __devexit ab8500_fg_remove(struct platform_device *pdev) flush_scheduled_work(); power_supply_unregister(&di->fg_psy); platform_set_drvdata(pdev, NULL); - kfree(di); return ret; } @@ -2442,22 +2441,149 @@ static struct ab8500_fg_interrupts ab8500_fg_irq[] = { {"CCEOC", ab8500_fg_cc_data_end_handler}, }; +static int __devinit +fg_of_probe(struct device *dev, + struct device_node *np, + struct abx500_bm_plat_data *bm_pdata) +{ + int i, ret = 0, thermistor = NTC_INTERNAL; + const __be32 *ph; + const char *bat_tech; + struct abx500_fg_platform_data *fg = bm_pdata->fg; + struct abx500_bm_data *bat; + struct abx500_battery_type *btype; + struct device_node *np_bat_supply; + + /* get phandle to 'supplied-to' node */ + ph = of_get_property(np, "supplied-to", &fg->num_supplicants); + if (ph == NULL) { + dev_err(dev, "no supplied_to property specified\n"); + return -EINVAL; + } + fg->num_supplicants /= sizeof(int); + fg->supplied_to = + devm_kzalloc(dev, fg->num_supplicants * + sizeof(const char *), GFP_KERNEL); + if (fg->supplied_to == NULL) { + dev_err(dev, "%s no mem for supplied-to\n", __func__); + return -ENOMEM; + } + for (i = 0; i < fg->num_supplicants; ++i) { + np_bat_supply = of_find_node_by_phandle(be32_to_cpup(ph) + i); + if (np_bat_supply == NULL) { + dev_err(dev, "invalid supplied_to property\n"); + return -EINVAL; + } + ret = of_property_read_string(np_bat_supply, "interface-name", + (const char **)(fg->supplied_to + i)); + if (ret < 0) { + of_node_put(np_bat_supply); + dev_err(dev, "supply/interface name not found\n"); + return ret; + } + dev_dbg(dev, "%s power supply interface_name:%s\n", + __func__, *(fg->supplied_to + i)); + } + /* get phandle to 'battery-info' node */ + ph = of_get_property(np, "battery-info", NULL); + if (ph == NULL) { + dev_err(dev, "missing property battery-info\n"); + return -EINVAL; + } + np_bat_supply = of_find_node_by_phandle(be32_to_cpup(ph)); + if (np_bat_supply == NULL) { + dev_err(dev, "invalid battery-info node\n"); + return -EINVAL; + } + if (of_property_read_bool(np_bat_supply, + "thermistor-on-batctrl") == false){ + dev_warn(dev, "missing property thermistor-on-batctrl\n"); + thermistor = NTC_EXTERNAL; + } + bm_pdata->battery = &ab8500_bm_data; + bat = bm_pdata->battery; + if (thermistor == NTC_EXTERNAL) { + bat->n_btypes = 4; + bat->bat_type = bat_type_ext_thermistor; + bat->adc_therm = ABx500_ADC_THERM_BATTEMP; + } + ret = of_property_read_string(np_bat_supply, "battery-name", &bat_tech); + if (ret < 0) { + dev_warn(dev, "missing property battery-name/type\n"); + bat_tech = "UNKNOWN"; + } + of_node_put(np_bat_supply); + if (strcmp(bat_tech, "LION") == 0) { + bat->no_maintenance = true; + bat->chg_unknown_bat = true; + bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600; + bat->bat_type[BATTERY_UNKNOWN].termination_vol = 4150; + bat->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130; + bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520; + bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; + } + /* select the battery resolution table */ + for (i = 0; i < bat->n_btypes; ++i) { + btype = (bat->bat_type + i); + if (thermistor == NTC_EXTERNAL) { + btype->batres_tbl = + temp_to_batres_tbl_ext_thermistor; + } else if (strcmp(bat_tech, "LION") == 0) { + btype->batres_tbl = + temp_to_batres_tbl_9100; + } else { + btype->batres_tbl = + temp_to_batres_tbl_thermistor; + } + } + return 0; +} + static int __devinit ab8500_fg_probe(struct platform_device *pdev) { int i, irq; int ret = 0; struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; struct ab8500_fg *di; + di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); + if (!di) { + dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__); + return -ENOMEM; + } + if (np) { + if (!plat_data) { + plat_data = + devm_kzalloc(&pdev->dev, sizeof(*plat_data), GFP_KERNEL); + if (!plat_data) { + dev_err(&pdev->dev, + "%s no mem for plat_data\n", __func__); + return -ENOMEM; + } + plat_data->fg = devm_kzalloc(&pdev->dev, + sizeof(*plat_data->fg), GFP_KERNEL); + if (!plat_data->fg) { + devm_kfree(&pdev->dev, plat_data); + dev_err(&pdev->dev, + "%s no mem for pdata->fg\n", + __func__); + return -ENOMEM; + } + } + /* get battery specific platform data */ + ret = fg_of_probe(&pdev->dev, np, plat_data); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get platform data\n"); + return ret; + } + } if (!plat_data) { - dev_err(&pdev->dev, "No platform data\n"); + dev_err(&pdev->dev, + "%s no fg platform data found\n", __func__); return -EINVAL; } - di = kzalloc(sizeof(*di), GFP_KERNEL); - if (!di) - return -ENOMEM; - mutex_init(&di->cc_lock); /* get parent data */ @@ -2469,16 +2595,14 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev) di->pdata = plat_data->fg; if (!di->pdata) { dev_err(di->dev, "no fg platform data supplied\n"); - ret = -EINVAL; - goto free_device_info; + return -EINVAL; } /* get battery specific platform data */ di->bat = plat_data->battery; if (!di->bat) { dev_err(di->dev, "no battery platform data supplied\n"); - ret = -EINVAL; - goto free_device_info; + return -EINVAL; } di->fg_psy.name = "ab8500_fg"; @@ -2506,7 +2630,7 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev) di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq"); if (di->fg_wq == NULL) { dev_err(di->dev, "failed to create work queue\n"); - goto free_device_info; + return -ENOMEM; } /* Init work for running the fg algorithm instantly */ @@ -2605,12 +2729,14 @@ free_irq: } free_inst_curr_wq: destroy_workqueue(di->fg_wq); -free_device_info: - kfree(di); - return ret; } +static const struct of_device_id ab8500_fg_match[] = { + {.compatible = "stericsson,ab8500-fg",}, + {}, +}; + static struct platform_driver ab8500_fg_driver = { .probe = ab8500_fg_probe, .remove = __devexit_p(ab8500_fg_remove), @@ -2619,6 +2745,7 @@ static struct platform_driver ab8500_fg_driver = { .driver = { .name = "ab8500-fg", .owner = THIS_MODULE, + .of_match_table = ab8500_fg_match, }, }; diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 1318ca6..4c7f62a 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -382,7 +382,7 @@ struct abx500_bm_data { int gnd_lift_resistance; const struct abx500_maxim_parameters *maxi; const struct abx500_bm_capacity_levels *cap_levels; - const struct abx500_battery_type *bat_type; + struct abx500_battery_type *bat_type; const struct abx500_bm_charger_parameters *chg_params; const struct abx500_fg_parameters *fg_params; }; @@ -416,6 +416,11 @@ struct abx500_bm_plat_data { struct abx500_chargalg_platform_data *chargalg; }; +enum { + NTC_EXTERNAL = 0, + NTC_INTERNAL, +}; + int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg, diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 44310c9..d15b7f1 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -422,6 +422,13 @@ struct ab8500_chargalg_platform_data { struct ab8500_btemp; struct ab8500_gpadc; struct ab8500_fg; + +extern struct abx500_bm_data ab8500_bm_data; +extern struct abx500_battery_type bat_type_ext_thermistor[]; +extern struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[]; +extern struct batres_vs_temp temp_to_batres_tbl_9100[]; +extern struct batres_vs_temp temp_to_batres_tbl_thermistor[]; + #ifdef CONFIG_AB8500_BM void ab8500_fg_reinit(void); void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); -- 1.7.9.5

13 years, 10 months

NI Power Meter Results

by Zach Pfeffer

Just wanted to share this with everyone. I've attached the "output" folder that the NI instrument creates for each test session. In the results file you'll see a text doc called results.txt that lists the comma delimited parameters that get measured followed by the measurements themselves: Current Cycle Average,Current Cycle RMS,Current Mean (DC),Current Negative Peak,Current Peak to Peak,Current Positive Peak,Current RMS,Volt Cycle Average,Volt Cycle RMS,Volt Mean (DC),Volt Negative Peak,Volt Peak to Peak,Volt Positive Peak,Volt RMS See: https://docs.google.com/a/linaro.org/file/d/0B3pUtxWjZbP9bFhqNGZfYzNSMWs/ed… Included in each record is a Record Number that indexes into the "report directory." Each directory is marked with an index and under that directory is the graph associated with the data for example: https://docs.google.com/a/linaro.org/file/d/0B3pUtxWjZbP9VnVQS3M4WWx1OVk/ed… In addition, controlling the instrument is super easy. You connect to the box over TCP/IP the you can send 5 single character commands in any order: 1,0,s,e,r 1 turns the power on 0 turns it off s starts a measurement e ends a measurement r records r is destructive, so if you send an r it erase the previous data record. The data record does survive instrument restarts (as opposed to having an implicit r at the start of the measurement. At any point the existing data set can simply be uploaded. One minor point. This instrument produces a lot of data, instead of moving all this data around, the instrument can be configured to do all the measurement, making the analyzed data set easier to understand and faster to upload. Comments and questions welcome. See it in action at: https://plus.google.com/u/0/104422661029399872488/posts/NU4pZ36L13U -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 10 months

omapconf tool publicly released

by Mike Turquette

Hi all, Some of you may have heard of a tool we use inside TI for debugging on OMAP. It's a nice userspace tool which can inspect many aspects of hardware state called "omapconf". The tool has just been open sourced and can be found at: https://github.com/omapconf/omapconf Regards, Mike

13 years, 10 months

[PATCH][V2] cpuidle : rename function name "__cpuidle_register_driver"

by Daniel Lezcano

The function __cpuidle_register_driver name is confusing because it suggests, conforming to the coding style of the kernel, it registers the driver without taking a lock. Actually, it just fill the different power field states with a decresing value if the power has not been specified. Clarify the purpose of the function by changing its name and move the condition out of this function. This patch fix nothing and does not change the behavior of the function. It is just for the sake of clarity. IHMO, reading in the code: + if (!drv->power_specified) + set_power_states(drv); is much more explicit than: - __cpuidle_register_driver(drv); Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> --- drivers/cpuidle/driver.c | 15 +++++++++------ 1 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 424bc81..87db387 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -18,9 +18,10 @@ static struct cpuidle_driver *cpuidle_curr_driver; DEFINE_SPINLOCK(cpuidle_driver_lock); int cpuidle_driver_refcount; -static void __cpuidle_register_driver(struct cpuidle_driver *drv) +static void set_power_states(struct cpuidle_driver *drv) { int i; + /* * cpuidle driver should set the drv->power_specified bit * before registering if the driver provides @@ -35,10 +36,8 @@ static void __cpuidle_register_driver(struct cpuidle_driver *drv) * an power value of -1. So we use -2, -3, etc, for other * c-states. */ - if (!drv->power_specified) { - for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) - drv->states[i].power_usage = -1 - i; - } + for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) + drv->states[i].power_usage = -1 - i; } /** @@ -58,8 +57,12 @@ int cpuidle_register_driver(struct cpuidle_driver *drv) spin_unlock(&cpuidle_driver_lock); return -EBUSY; } - __cpuidle_register_driver(drv); + + if (!drv->power_specified) + set_power_states(drv); + cpuidle_curr_driver = drv; + spin_unlock(&cpuidle_driver_lock); return 0; -- 1.7.5.4

13 years, 10 months

[PATCH v3 0/3] devfreq: Add support for devices which can idle

by Rajagopal Venkat

This patchset updates devfreq core to add support for devices which can idle. When device idleness is detected perhaps through runtime-pm, need some mechanism to suspend devfreq load monitoring and resume when device is back online. patch 1 introduce core design changes - per device work, decouple delayed work from core and event based interaction. patch 2 add devfreq suspend and resume apis. patch 3 add new sysfs attribute for governor predicted next target frequency and callback for current device frequency. The existing devfreq apis are kept intact. Two new apis devfreq_suspend_device() and devfreq_resume_device() are added to support suspend/resume of device devfreq. Changes since v1: - revised locking mechanism - added kerneldoc comments for load monitoring helper functions - Fixed minor review comments Changes since v2: - added new helper function for polling interval update - Handled work suspend/resume contention between devfreq driver and sysfs -- Rajagopal Venkat (3): devfreq: Core updates to support devices which can idle devfreq: Add suspend and resume apis devfreq: Add current freq callback in device profile Documentation/ABI/testing/sysfs-class-devfreq | 15 +- drivers/devfreq/devfreq.c | 469 ++++++++++++-------------- drivers/devfreq/governor.h | 13 + drivers/devfreq/governor_performance.c | 16 +- drivers/devfreq/governor_powersave.c | 16 +- drivers/devfreq/governor_simpleondemand.c | 33 ++ drivers/devfreq/governor_userspace.c | 23 +- include/linux/devfreq.h | 49 +-- 8 files changed, 341 insertions(+), 293 deletions(-) -- 1.7.11.3

13 years, 10 months

Test Result Summary for Calendar Week 38.

by Botao Sun

Calendar Week 38: Here is test result summary for Linaro ubuntu platform on following boards: 1) ARM Versatile Express A9; 2) Samsung Origen; 3) TI Panda Board 4430; 4) TI Panda Board 4460. *Synopsis: YouTube works on Panda 4460 but failed on all the other boards. All DS5 test passed on above 4 boards after pre-installed "arm-ds5-target" package.* 1. vexpress A9 + ubuntu (Column Z): https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdFNmV… Device tree blob files have disappeared for 6 weeks, and 480p video playback doesn't work for 2 months. Application debug in DS5 suite works well now, by pre-install "arm-ds5-target" package on target. YouTube totally doesn't work, only preview picture shows. 2. Origen + ubuntu (Column V): https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEowN… Dead lock error exists for 9 weeks, Unity 3D is unavailable from the beginning, Mini HDMI output never works either. WiFi is unavailable for 4 weeks and Bluetooth is even broken for a longer time. 480p video playback doesn't work for 2 months, however, DS5 works well on all features with "arm-ds5-target" package pre-installed. 3. Panda 4430 + ubuntu (Column W): https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEwwZ… YouTube HTML5 video playback failed again, it will hang the system. 480p video playback is unavailable for 2 months. Bluetooth headset works, but can't be powered off in paired condition, otherwise, it will hang the board. DS5 works. 4. Panda 4460 + ubuntu (Column W): https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AroPySpr4FnEdEwwZ… YouTube HTML5 video playback works well. However, 480p video playback from SD card is still unavailable for 9 weeks. Bluetooth works except file transfer failed, and a paired device can be shut down without any side effect. DS5 works. For the previous week (Calendar week 37) summary, please refer to attachment. Thank you. BR Botao Sun

13 years, 10 months

[PATCH 0/2] Thermal patches to deactive cooling devices when needed

by zhanghongbo

From: "hongbo.zhang" <hongbo.zhang(a)linaro.com> This patch set contains two patches. [PATCH 1/2] A new interface is introduced to deactive all the referenced cooling devices when thermal zone is disabled. Because the cooling device list is maintained in the generic thermal layer, the thermal driver cannot walk through the list and cannot deactive its cooling devices either. This interface is needed in the .set_mode callback when the thermal zone mode is set to "disabled". [PATCH 2/2] When a cooling device is unbound it should be deactived, otherwise cooling device will keep active after unbinding, this isn't what we expect. hongbo.zhang (2): Thermal: Add interface to deactive cooling devices. Thermal: Deactive cooling device when unbind it. drivers/thermal/thermal_sys.c | 24 ++++++++++++++++++++++++ include/linux/thermal.h | 1 + 2 files changed, 25 insertions(+) -- 1.7.11.3

13 years, 10 months

[PATCH 1/2][RFC] cpuidle : move driver's refcount to cpuidle

by Daniel Lezcano

In the next patch, we will support different cpuidle drivers tied with a cpu. In this case we should move the refcount to the cpuidle_driver structure to handle several drivers at a time. Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> --- drivers/cpuidle/driver.c | 11 ++++++----- include/linux/cpuidle.h | 1 + 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 87db387..676febd 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -16,7 +16,6 @@ static struct cpuidle_driver *cpuidle_curr_driver; DEFINE_SPINLOCK(cpuidle_driver_lock); -int cpuidle_driver_refcount; static void set_power_states(struct cpuidle_driver *drv) { @@ -92,7 +91,7 @@ void cpuidle_unregister_driver(struct cpuidle_driver *drv) spin_lock(&cpuidle_driver_lock); - if (!WARN_ON(cpuidle_driver_refcount > 0)) + if (!WARN_ON(drv->refcnt > 0)) cpuidle_curr_driver = NULL; spin_unlock(&cpuidle_driver_lock); @@ -106,7 +105,7 @@ struct cpuidle_driver *cpuidle_driver_ref(void) spin_lock(&cpuidle_driver_lock); drv = cpuidle_curr_driver; - cpuidle_driver_refcount++; + drv->refcnt++; spin_unlock(&cpuidle_driver_lock); return drv; @@ -114,10 +113,12 @@ struct cpuidle_driver *cpuidle_driver_ref(void) void cpuidle_driver_unref(void) { + struct cpuidle_driver *drv = cpuidle_curr_driver; + spin_lock(&cpuidle_driver_lock); - if (!WARN_ON(cpuidle_driver_refcount <= 0)) - cpuidle_driver_refcount--; + if (drv && !WARN_ON(drv->refcnt <= 0)) + drv->refcnt--; spin_unlock(&cpuidle_driver_lock); } diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 279b1ea..a4ff9f8 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -131,6 +131,7 @@ static inline int cpuidle_get_last_residency(struct cpuidle_device *dev) struct cpuidle_driver { const char *name; struct module *owner; + int refcnt; unsigned int power_specified:1; /* set to 1 to use the core cpuidle time keeping (for all states). */ -- 1.7.5.4

13 years, 10 months

Re: Linaro Website Contact

by Amber Graner

Hi Christoph, Thank you so much for contacting us. I am forwarding your question to our graphics team and CC'ing their Tech Lead. More information on the Linaro Graphics team can be found at: https://wiki.linaro.org/WorkingGroups/Middleware/Graphics You can also send future questions to the linaro-dev mailing list or you may ask in the #linaro IRC channel on irc.freenode.net. Please let me know if there if I can be of further assistance to you. All the best, Amber On 18 September 2012 19:21, Linaro Content Management System < linaro(a)freshleafmedia.co.uk> wrote: > ** > Linaro Website Form Submission - *Contact Form* > A user has submitted the following information on the Linaro website: > > Name Christoph Stadelmann Email christoph.stadelmann(a)gmx.de Message Dear > Sir or Madam, I just got the snowball board. I want to know if there is > something similar to the libvga in the linaro OS in order to map and have > direct write access to the HDMI frame buffer. Thank you very much. > Christoph Stadelmann Form Url http://www.linaro.org/contact > > This enquiry was received via the *Contact Form* on the website: > http://www.linaro.org/contact > > Thank you, > > Linaro > -- Amber Graner User Experience and Community Specialist Linaro.org <http://www.linaro.org/>* **│ *Open source software for ARM SoCs* *** Follow *Linaro: *Facebook <http://www.facebook.com/pages/Linaro> | Twitter<http://twitter.com/#%21/linaroorg> | Blog <http://www.linaro.org/linaro-blog/> *+1.828.582.9469* cell *+1.828.395.1049* office irc: akgraner amber.graner(a)linaro.org (email and Google chat)

13 years, 10 months

fastmodel run over ubuntu 64bit machine

by Lei Wen

Hi, Does anyone try to run the fastmodel over ubuntu 64bit machine? I try to run the simulation over Cortex-A15 model, but get below error message when start: "Fatal Error: No CreateCADIBroker entry point found. Not a CADI 2.0 model ?" Anyone knows what this message means? Do I need any additional configuration to bring up the fastmodel over 64bit ubuntu? Thanks, Lei

13 years, 10 months

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev September 2012