linaro-dev February 2012

linaro-dev@lists.linaro.org

150 participants
147 discussions

[DOWNTIME] Android Build is down due to Ubuntu's sun-java6 package revocation

by Paul Sokolovsky

Hello, Recently, Ubuntu revoked sun-java6-* packages following retirement of its license: https://lists.ubuntu.com/archives/ubuntu-security-announce/2012-January/001… It propagated to the repositories we use for android-build.linaro.org slaves on this weekend. The end effect of this besides builds not being able to proceed, is slave pile-up issue, as Jenkins, seeing an initialization error for one slave, tries to start another, all going in cycles. As it's pretty late in here, the action I'm taking is disabling builds altogether, to proceed with resolving this first thing in the morning (access to previous builds is still available). Proposed actions are: 1. Install sun-java6-* from cached .deb's as risk-mitigating measure while analyzing the issue. 2. Consider/test switching to OpenJDK, as recommended by https://wiki.ubuntu.com/LucidLynx/ReleaseNotes/Java6Transition . Note that sun-java6 have been, and still is, listed by Google as the Android build prerequisite: http://source.android.com/source/initializing.html However, there were success reports with OpenJDK from individual developers previously. -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 2 months

12.02 Release Testing

by Zach Pfeffer

Hello everyone! Welcome back from Connect,ABS and ELC. I hope everyone had a safe trip home. Tony has listed the testing volunteers at: https://wiki.linaro.org/Cycles/1202/Release/PointOfContacts Please fill out the new QA test sheets for the following builds. We're only testing one Panda build (tracking). i.MX53 Quick Start, botao-sun https://android-build.linaro.org/builds/~linaro-android/imx53-ics-gcc46-fre… https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDE1M… i.MX6, bero https://android-build.linaro.org/builds/~linaro-android/imx6-ics-gcc46-free… https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDE1M… Origen, pfefferz https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc46-sa… https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV… PandaBoard 4460, bhoj https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc46-til… https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… PandaBoard 4430, abhishek https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc46-til… https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… Snowball, mansson https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-… https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N… vexpress-a9, pundiramit https://android-build.linaro.org/builds/~linaro-android/vexpress-ics-gcc46-… https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… Note the new layout of the testsheets. Also note that you should fill out the r1202 column and not edit the release names or the test names in each sheet since they're actually being imported now from a mastersheet. Patrik Ryd, would you boot test: https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc46-kwg… https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc46-oma… on 4430? (Look at the tip build of https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc46-oma… for special instructions) Please enter just the boot test into the spreadsheets. bhoj would you boot test 4460? I'd also like everyone to update the build notes for each release build you test. Paul would you put eveyone on the To: list on the access list for editing the build notes? The build notes should be a release specific copy of the tip. If you look at: https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc46-til… you'll see notes listed. Each release should have build notes. To update the release notes login and select the build in jenkins: https://android-build.linaro.org/jenkins Click add description. You'll probably want to take the from from the 12.01 releases (there's a little formatting). Send me questions. Thanks again to everyone for working so hard for Connect,ABS and ELC. Lets get 12.02 out the door and blast off to 12.03. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 2 months

Ask a question that use Linaro to develop app ?

by peter.meng

HI I'm newbie for Linaro . I understand that Linaro just provide the toolchains , u-boot, kernel after view the guide quickly . I want to know how about the basic function such as busybox etc . I assume that buy a board such as Pandaboard ES that use Linaro to do application develop as following action Step 1 install toolchain from Linaro Step 2 compile u-boot from Linaro Step 3 compile linux kernel from Linaro Step 4 I need compile such as busybox etc for root filesystem by myself . Is this step correctly ? Thanks a lot Best Regards . Peter Meng mengsanshui(a)gmail.com

13 years, 2 months

[PATCH] sched: generalize CONFIG_IRQ_TIME_ACCOUNTING for X86 and ARM

by Dmitry Antipov

Generalize CONFIG_IRQ_TIME_ACCOUNTING between X86 and ARM, move "noirqtime=" option to common debugging code. For a bit of backward compatibility, X86-specific option "tsc=noirqtime" is preserved, but issues a warning. Suggested-by: Yong Zhang <yong.zhang0(a)gmail.com> Suggested-by: Russell King <rmk+kernel(a)arm.linux.org.uk> Acked-by: Venkatesh Pallipadi <venki(a)google.com> Signed-off-by: Dmitry Antipov <dmitry.antipov(a)linaro.org> --- Documentation/kernel-parameters.txt | 9 +++++---- arch/arm/kernel/sched_clock.c | 2 ++ arch/x86/Kconfig | 11 ----------- arch/x86/kernel/tsc.c | 12 ++++++------ include/linux/sched.h | 17 ++++++++++------- kernel/sched/core.c | 20 +++++++++++--------- lib/Kconfig.debug | 12 ++++++++++++ 7 files changed, 46 insertions(+), 37 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 033d4e6..a5da255 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1790,6 +1790,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. noirqdebug [X86-32] Disables the code which attempts to detect and disable unhandled interrupt sources. + noirqtime [X86,ARM] Run time disables IRQ_TIME_ACCOUNTING and + eliminates the timestamping on irq/softirq entry/exit. + no_timer_check [X86,APIC] Disables the code which tests for broken timer IRQ sources. @@ -2636,10 +2639,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. as the stability checks done at bootup. Used to enable high-resolution timer mode on older hardware, and in virtualized environment. - [x86] noirqtime: Do not use TSC to do irq accounting. - Used to run time disable IRQ_TIME_ACCOUNTING on any - platforms where RDTSC is slow and this accounting - can add overhead. + [x86] noirqtime: obsoleted by "noirqtime" generic option, + see it's documentation for details. turbografx.map[2|3]= [HW,JOY] TurboGraFX parallel port interface diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 5416c7c..30b5f89 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -144,6 +144,8 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) */ cd.epoch_ns = 0; + enable_sched_clock_irqtime(); + pr_debug("Registered %pF as sched_clock source\n", read); } diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5bed94e..4759676 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -805,17 +805,6 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. -config IRQ_TIME_ACCOUNTING - bool "Fine granularity task level IRQ time accounting" - default n - ---help--- - Select this option to enable fine granularity task irq time - accounting. This is done by reading a timestamp on each - transitions between softirq and hardirq state, so there can be a - small performance impact. - - If in doubt, say N here. - source "kernel/Kconfig.preempt" config X86_UP_APIC diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index a62c201..f1b2b63 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -103,14 +103,15 @@ int __init notsc_setup(char *str) __setup("notsc", notsc_setup); -static int no_sched_irq_time; - static int __init tsc_setup(char *str) { if (!strcmp(str, "reliable")) tsc_clocksource_reliable = 1; - if (!strncmp(str, "noirqtime", 9)) - no_sched_irq_time = 1; + if (!strncmp(str, "noirqtime", 9)) { + printk(KERN_WARNING "tsc: tsc=noirqtime is " + "obsolete, use noirqtime instead\n"); + disable_sched_clock_irqtime(); + } return 1; } @@ -978,8 +979,7 @@ void __init tsc_init(void) /* now allow native_sched_clock() to use rdtsc */ tsc_disabled = 0; - if (!no_sched_irq_time) - enable_sched_clock_irqtime(); + enable_sched_clock_irqtime(); lpj = ((u64)tsc_khz * 1000); do_div(lpj, HZ); diff --git a/include/linux/sched.h b/include/linux/sched.h index 7d379a6..9b13f79 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1961,13 +1961,16 @@ extern void sched_clock_idle_wakeup_event(u64 delta_ns); #endif #ifdef CONFIG_IRQ_TIME_ACCOUNTING -/* - * An i/f to runtime opt-in for irq time accounting based off of sched_clock. - * The reason for this explicit opt-in is not to have perf penalty with - * slow sched_clocks. - */ -extern void enable_sched_clock_irqtime(void); -extern void disable_sched_clock_irqtime(void); +extern int sched_clock_irqtime; +static inline void enable_sched_clock_irqtime(void) +{ + if (sched_clock_irqtime == -1) + sched_clock_irqtime = 1; +} +static inline void disable_sched_clock_irqtime(void) +{ + sched_clock_irqtime = 0; +} #else static inline void enable_sched_clock_irqtime(void) {} static inline void disable_sched_clock_irqtime(void) {} diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 5255c9d..a7ec043 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -757,18 +757,20 @@ static DEFINE_PER_CPU(u64, cpu_hardirq_time); static DEFINE_PER_CPU(u64, cpu_softirq_time); static DEFINE_PER_CPU(u64, irq_start_time); -static int sched_clock_irqtime; -void enable_sched_clock_irqtime(void) -{ - sched_clock_irqtime = 1; -} +/* -1 if not initialized, 0 if disabled with "noirqtime" kernel option + * or after unstable clock was detected, 1 if enabled and active. + */ +int sched_clock_irqtime = -1; -void disable_sched_clock_irqtime(void) +static int __init irqtime_setup(char *str) { sched_clock_irqtime = 0; + return 1; } +__setup("noirqtime", irqtime_setup); + #ifndef CONFIG_64BIT static DEFINE_PER_CPU(seqcount_t, irq_time_seq); @@ -822,7 +824,7 @@ void account_system_vtime(struct task_struct *curr) s64 delta; int cpu; - if (!sched_clock_irqtime) + if (sched_clock_irqtime < 1) return; local_irq_save(flags); @@ -2853,7 +2855,7 @@ void account_process_tick(struct task_struct *p, int user_tick) cputime_t one_jiffy_scaled = cputime_to_scaled(cputime_one_jiffy); struct rq *rq = this_rq(); - if (sched_clock_irqtime) { + if (sched_clock_irqtime > 0) { irqtime_account_process_tick(p, user_tick, rq); return; } @@ -2887,7 +2889,7 @@ void account_steal_ticks(unsigned long ticks) void account_idle_ticks(unsigned long ticks) { - if (sched_clock_irqtime) { + if (sched_clock_irqtime > 0) { irqtime_account_idle_ticks(ticks); return; } diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8745ac7..236e814 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -299,6 +299,18 @@ config SCHEDSTATS application, you can say N to avoid the very slight overhead this adds. +config IRQ_TIME_ACCOUNTING + bool "Fine granularity task level IRQ time accounting" + depends on X86 || ARM + default n + ---help--- + Select this option to enable fine granularity task irq time + accounting. This is done by reading a timestamp on each + transitions between softirq and hardirq state, so there can be a + small performance impact. + + If in doubt, say N here. + config TIMER_STATS bool "Collect kernel timers statistics" depends on DEBUG_KERNEL && PROC_FS -- 1.7.7.6

13 years, 2 months

[PATCH][V3] ux500 : decouple/recouple gic from the PRCMU

by Daniel Lezcano

This patch allows to decouple and recouple the gic from the PRCMU. This is needed to put the A9 core in retention mode with the cpuidle driver. Signed-off-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> --- drivers/mfd/db8500-prcmu.c | 32 ++++++++++++++++++++++++++++++++ include/linux/mfd/db8500-prcmu.h | 2 ++ include/linux/mfd/dbx500-prcmu.h | 16 ++++++++++++++++ 3 files changed, 50 insertions(+), 0 deletions(-) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index af8e0ef..9baf4cd 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -787,6 +787,38 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) return 0; } +#define PRCMU_A9_MASK_REQ 0x00000328 +#define PRCMU_A9_MASK_REQ_MASK 0x00000001 +#define PRCMU_GIC_DELAY 1 + +/* This function decouple the gic from the prcmu */ +int db8500_prcmu_gic_decouple(void) +{ + u32 val = readl(_PRCMU_BASE + PRCMU_A9_MASK_REQ); + + /* Set bit 0 register value to 1 */ + writel(val | PRCMU_A9_MASK_REQ_MASK, _PRCMU_BASE + PRCMU_A9_MASK_REQ); + + /* Make sure the register is updated */ + readl(_PRCMU_BASE + PRCMU_A9_MASK_REQ); + + /* Wait a few cycles for the gic mask completion */ + udelay(PRCMU_GIC_DELAY); + + return 0; +} + +/* This function recouple the gic with the prcmu */ +int db8500_prcmu_gic_recouple(void) +{ + u32 val = readl(_PRCMU_BASE + PRCMU_A9_MASK_REQ); + + /* Set bit 0 register value to 0 */ + writel(val & ~PRCMU_A9_MASK_REQ_MASK, _PRCMU_BASE + PRCMU_A9_MASK_REQ); + + return 0; +} + /* This function should only be called while mb0_transfer.lock is held. */ static void config_wakeups(void) { diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 60d27f7..a3c7eba 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -536,6 +536,8 @@ int prcmu_load_a9wdog(u8 id, u32 val); void db8500_prcmu_system_reset(u16 reset_code); int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); +int db8500_prcmu_gic_decouple(void); +int db8500_prcmu_gic_recouple(void); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index bac942f..d38cf7d 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -237,6 +237,22 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, keep_ap_pll); } +static inline int prcmu_gic_decouple(void) +{ + if (machine_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_decouple(); +} + +static inline int prcmu_gic_recouple(void) +{ + if (machine_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_recouple(); +} + static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { if (machine_is_u5500()) -- 1.7.5.4

13 years, 2 months

my LWN article on big.LITTLE

by Nicolas Pitre

For those of you interested by the topic, my article was published today. With a LWN subscription (or freely accessible in 2 weeks), it can be viewed here: http://lwn.net/Articles/481055/ The comments section is growing fast already! Nicolas

13 years, 2 months

Salon 3, today and tomorrow (16th and 17th)

by Zach Pfeffer

Alexander had the very good idea to ask the Linux Foundation if they would set up a hacking room. They set aside Salon 3 for today and tomorrow. I've brought some (all) of the hardware down if people need to run stuff or want to collaborate. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 2 months

[ANN] Finished migration of Android downloads to snapshots.linaro.org

by Paul Sokolovsky

Hello, We started migrating Android build artifacts as produced by https://android-build.linaro.org/ to http:///snapshots.linaro.org almost 2 months ago and now the migration can be pronounced complete. From now on, http://snapshots.linaro.org/android/ is the master download location for all Android builds, with all builds done in last 2 months available there, important historical builds (*1) migrated there too, and archiving on android-build.linaro.org now turned off. There are several benefits for hosting Android builds directly on snapshots.linaro.org: 1. It is a central place for all Linaro downloads. 2. It allows to manage EULA protection in centralized manner. 3. It allows for consistent structuring and styling. 4. It allows for better space and retention policy management. 5. It alleviates Infrastructure team from maintaining Android downloads on the Jenkins server, allowing us to concentrate on build side of it. Please note that this change is transparent to https://android-build.linaro.org/ - artifacts can still be download from its detailed pages, the links just point to snapshots.linaro.org . All existing artifacts also stay available on android-build.linaro.org, so any previously disseminated links remain valid (*2). *1 Only historical releases were migrated to snapshots.linaro.org, historical daily and developers' built were not due to concerns with current disk space availability on snapshots.linaro.org. But both daily and developers' builds are subject to expiration (lifetime 3 months max), and with 2 months of snapshots.linaro.org archiving, there's only one month's worth of builds left on android-build.linaro.org, which would expire shortly. *2 Subject to expiration policy, per (*1) -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 2 months

Re: Last call for patches for the 12.02 release of linux-linaro kernel

by Andrey Konovalov

Hi Avik, Your fix seems ok for ubuntu/debian, but this would not work in general case. E.g. Fedora doesn't have /usr/bin/pager. So this doesn't look like a generic solution that fits into linux-linaro kernel. Also for a patch I need a one-line title (subject), a short description of the change, and the "Signed-off-by: Name <email>". I.e. all the stuff a git commit header should have. Thanks, Andrey On 02/14/2012 03:33 PM, Avik Sil wrote: > Hi Andrey, > > Can you please consider adding the following patch that supposedly fixes > bug 833101 (https://bugs.launchpad.net/bugs/833101)? > > Regards, > Avik > > diff --git a/tools/perf/util/pager.c b/tools/perf/util/pager.c > index 1915de2..13496dc 100644 > --- a/tools/perf/util/pager.c > +++ b/tools/perf/util/pager.c > @@ -58,7 +58,7 @@ void setup_pager(void) > if (!pager) > pager = getenv("PAGER"); > if (!pager) > - pager = "less"; > + pager = "pager"; > else if (!*pager || !strcmp(pager, "cat")) > return; > > > On Tuesday 14 February 2012 01:52 AM, Andrey Konovalov wrote: >> Greetings, >> >> If someone has something which is not in the mainline, was not in the >> 12.01 kernel release, but worth including into the 12.02 kernel release, >> please let me know by the end of Feb 14, PST (the git branch where I >> could pull from). This release will be v3.3-rc3 based, so you patches >> should be based on that (easiest for me), or on the tip of the linus >> tree. >> >> My expectations are that the power management WG has some topics to add >> to the 12.02. >> >> I am aware of git://git.secretlab.ca/git/linux-2.6.git, irqdomain/next >> >> The kernel working group has some blueprints for 12.02. Please let me >> know, if there is something for me to do here. >> >> The following commits from linux-linaro-3.2 branch will be carried over >> to 12.02: >> commit 2eb6f8b98d8471c83be7e3ab53fe4386884c96a9 >> Author: Vincent Guittot <vincent.guittot(a)linaro.org> >> Date: Fri Oct 21 09:02:47 2011 +0200 >> sched: Ensure cpu_power periodic update >> >> commit 2b21b980917662503a16e079b5d4a5a8a17886cd >> Author: Arnd Bergmann <arnd(a)arndb.de> >> Date: Sat Oct 8 17:07:50 2011 +0200 >> ARM: kprobes: work around build errors >> >> commit 61d24dd4d0528d369ea81f6e5d5e1db9c62ad46a >> Author: Ming Lei <ming.lei(a)canonical.com> >> Date: Wed Aug 31 00:03:13 2011 +0800 >> usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP >> >> Amit (Amit Daniel Kachhap), please let me know if for 12.02 I should use >> the commits below, or take an updated version from you: >> ARM: exynos4: Add thermal sensor driver platform device support >> thermal: exynos4: Register the tmu sensor with the thermal interface >> layer >> thermal: exynos: Add thermal interface support for linux thermal layer >> thermal: Add generic cpu cooling implementation >> thermal: Add a new trip type to use cooling device instance number >> EXYNOS: Make EXYNOS common cpufreq driver >> ARM: exynos: Enable l2 configuration through device tree >> ARM: exynos: remove useless code to save/restore L2 >> ARM: exynos: save L2 settings during bootup >> ARM: s5p: add L2 early resume code >> ARM: exynos: Add support AFTR mode on EXYNOS4210 >> >> >> Thanks, >> Andrey Konovalov >> >> _______________________________________________ >> linaro-dev mailing list >> linaro-dev(a)lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/linaro-dev >

13 years, 2 months

Selecting default framebuffer through kernel command-line ?

by Tushar Behera

Hi, This issue is currently specific to the Ubuntu LEB for Origen and is also being discussed under the LP bug #906762 [1]. Writing to a wider audience to get views of others who might have come across similar situation before. Currently the LCD FB is registered as /dev/fb0 and the HDMI FB is registered as /dev/fb1. While booting up, by default /dev/fb0 is used as the primary display device and the output is routed accordingly. To use the HDMI display, we need to update /etc/X11/xorg.conf (and this needs to be updated every time we update the file-system.) If we don't enable support for LCD FB, the display comes on HDMI during boot-time, but again that is not desirable considering we want to use both the LCD and HDMI with the same kernel binary. Is there any way where we can force the default frame-buffer (whether to choose /dev/fb0 or /dev/fb1) during boot-time, might be through some kernel command-line options? [1] https://bugs.launchpad.net/linaro-landing-team-samsung/+bug/906762 -- Tushar Behera

13 years, 2 months

← Newer
1
...
5
6
7
8
9
10
11
...
15
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev February 2012