linaro-dev September 2011

linaro-dev@lists.linaro.org

149 participants
200 discussions

[PATCH] ARM: EXYNOS4: Setup consistent dma size at boot time

by Tushar Behera

Some of the boards under mach-exynos4 initialize frame-buffers for which the memory requirement is more than 2MB (Nuri board requires around 4MB, Origen requires around 2.6MB), hence the default dma pool allocation size of 2MB is not sufficient. The consistent dma size is hence increased to successfully allocate memory for those boards. Depends on "ARM: Add init_consistent_dma_size()" by Jon Medhurst (99d1717dd7fecf2b10195b0d864323b952b4eba0). CC: Jon Medhurst <tixy(a)yxit.co.uk> Signed-off-by: Tushar Behera <tushar.behera(a)linaro.org> --- arch/arm/mach-exynos4/cpu.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 2d8a40c..45d8bfa 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -10,6 +10,7 @@ #include <linux/sched.h> #include <linux/sysdev.h> +#include <linux/dma-mapping.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -136,6 +137,7 @@ static void exynos4_idle(void) void __init exynos4_map_io(void) { iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); + init_consistent_dma_size(SZ_8M); /* initialize device information early */ exynos4_default_sdhci0(); -- 1.7.4.1

14 years

BUGREPORTED work item state

by Fathi Boudra

Hi Zach, I noticed that you introduced BUGREPORTED on Android blueprints for the work items. It raised a couple of questions: 1. what does BUGREPORTED means ? 2. do we need to update https://wiki.linaro.org/Process/WorkItemsHowto#Work_items_in_the_whiteboard ? The whiteboard work items are parsed to update status.linaro.org so I guess these work items are simply skipped. Cheers, -- Fathi Boudra Linaro Release Manager | Validation Project Manager Linaro.org | Open source software for ARM SoCs

14 years

[PATCH 01/11] MFD: DA9052/53 MFD core module v6

by ashishj3

The DA9052/53 is a highly integrated PMIC subsystem with supply domain flexibility to support wide range of high performance application. It provides voltage regulators, GPIO controller, Touch Screen, RTC, Battery control and other functionality. Signed-off-by: David Dajun Chen <dchen(a)diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam(a)kpitcummins.com> --- Changes since v6: - Move inlined device I/O functions to header file Changes since v5: - Inline device I/O - Unhandle IRQ return RQ_NONE - Remove register address conversion Changes since v4: - Modify KConfig - Use device registration for detemining chip id - Remove preprocessor directive with runtime bustype variable - Replace module_init() for spi with subsys_initcall() - Remove platform string from MODULE_ALIAS of spi module. Changes since v3: - Code refactored to use REGMAP API. - Add Battery resources. - da9052_set_bits() and da9052_clear_bits() replaced by da9052_reg_update(). - Add support for DA9053 PMIC Changes since v2: - Drop da9052_irqs[] table. - Move struct da9052_subdev_info[]. - Remove initialization of static member. - Care for NULL pdata init(). - Check removal of subdevices on errors. - Remove open source spi code. - Remove '_spi' from the driver name. - Move tbat_lookup table from header file. - Remove irq.h - Remove num_gpio variable from pdata --- drivers/mfd/Kconfig | 26 ++ drivers/mfd/Makefile | 7 + drivers/mfd/da9052-core.c | 333 ++++++++++++++++ drivers/mfd/da9052-i2c.c | 142 +++++++ drivers/mfd/da9052-irq.c | 173 ++++++++ drivers/mfd/da9052-spi.c | 166 ++++++++ include/linux/mfd/da9052/da9052.h | 139 +++++++ include/linux/mfd/da9052/pdata.h | 42 ++ include/linux/mfd/da9052/reg.h | 777 +++++++++++++++++++++++++++++++++++++ 9 files changed, 1805 insertions(+), 0 deletions(-) create mode 100644 drivers/mfd/da9052-core.c create mode 100644 drivers/mfd/da9052-i2c.c create mode 100644 drivers/mfd/da9052-irq.c create mode 100644 drivers/mfd/da9052-spi.c create mode 100644 include/linux/mfd/da9052/da9052.h create mode 100644 include/linux/mfd/da9052/pdata.h create mode 100644 include/linux/mfd/da9052/reg.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 21574bd..572a6a8 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -343,6 +343,32 @@ config PMIC_DA903X individual components like LCD backlight, voltage regulators, LEDs and battery-charger under the corresponding menus. +config PMIC_DA9052 + bool + select MFD_CORE + +config MFD_DA9052_SPI + bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" + select REGMAP_SPI + select PMIC_DA9052 + depends on SPI_MASTER=y + help + Support for the Dialog Semiconductor DA9052 PMIC + when controlled using SPI. This driver provides common support + for accessing the device, additional drivers must be enabled in + order to use the functionality of the device. + +config MFD_DA9052_I2C + bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" + select REGMAP_I2C + select PMIC_DA9052 + depends on I2C=y + help + Support for the Dialog Semiconductor DA9052 PMIC + when controlled using I2C. This driver provides common support + for accessing the device, additional drivers must be enabled in + order to use the functionality of the device. + config PMIC_ADP5520 bool "Analog Devices ADP5520/01 MFD PMIC Core Support" depends on I2C=y diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index c580203..89a5837 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -67,6 +67,13 @@ endif obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o obj-$(CONFIG_PMIC_DA903X) += da903x.o + +da9052-objs := da9052-core.o da9052-irq.o +obj-$(CONFIG_PMIC_DA9052) += da9052.o + +obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o +obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o + max8925-objs := max8925-core.o max8925-i2c.o obj-$(CONFIG_MFD_MAX8925) += max8925.o obj-$(CONFIG_MFD_MAX8997) += max8997.o max8997-irq.o diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c new file mode 100644 index 0000000..9a439b3 --- /dev/null +++ b/drivers/mfd/da9052-core.c @@ -0,0 +1,333 @@ +/* + * Device access for Dialog DA9052 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mutex.h> +#include <linux/mfd/core.h> +#include <linux/slab.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/pdata.h> +#include <linux/mfd/da9052/reg.h> + +#define DA9052_IRQ_DCIN 0 +#define DA9052_IRQ_VBUS 1 +#define DA9052_IRQ_DCINREM 2 +#define DA9052_IRQ_VBUSREM 3 +#define DA9052_IRQ_ALARM 5 +#define DA9052_IRQ_NONKEY 8 +#define DA9052_IRQ_CHGEND 11 +#define DA9052_IRQ_TBAT 12 +#define DA9052_IRQ_PENDOWN 14 +#define DA9052_IRQ_TSIREADY 15 + +/* + * TBAT look-up table is computed from the R90 reg (8 bit register) + * reading as below. The battery temperature is in milliCentigrade + * TBAT = (1/(t1+1/298) - 273) * 1000 mC + * where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) + * Default values are R25 = 10e3, B = 3380, ITBAT = 50e-6 + * Example: + * R25=10E3, B=3380, ITBAT=50e-6, ADCVAL=62d calculates + * TBAT = 20015 mili degrees Centrigrade + * +*/ +static const int32_t tbat_lookup[255] = { + 183258, 144221, 124334, 111336, 101826, 94397, 88343, 83257, + 78889, 75071, 71688, 68656, 65914, 63414, 61120, 59001, + 570366, 55204, 53490, 51881, 50364, 48931, 47574, 46285, + 45059, 43889, 42772, 41703, 40678, 39694, 38748, 37838, + 36961, 36115, 35297, 34507, 33743, 33002, 32284, 31588, + 30911, 30254, 29615, 28994, 28389, 27799, 27225, 26664, + 26117, 25584, 25062, 24553, 24054, 23567, 23091, 22624, + 22167, 21719, 21281, 20851, 20429, 20015, 19610, 19211, + 18820, 18436, 18058, 17688, 17323, 16965, 16612, 16266, + 15925, 15589, 15259, 14933, 14613, 14298, 13987, 13681, + 13379, 13082, 12788, 12499, 12214, 11933, 11655, 11382, + 11112, 10845, 10582, 10322, 10066, 9812, 9562, 9315, + 9071, 8830, 8591, 8356, 8123, 7893, 7665, 7440, + 7218, 6998, 6780, 6565, 6352, 6141, 5933, 5726, + 5522, 5320, 5120, 4922, 4726, 4532, 4340, 4149, + 3961, 3774, 3589, 3406, 3225, 3045, 2867, 2690, + 2516, 2342, 2170, 2000, 1831, 1664, 1498, 1334, + 1171, 1009, 849, 690, 532, 376, 221, 67, + -84, -236, -386, -535, -683, -830, -975, -1119, + -1263, -1405, -1546, -1686, -1825, -1964, -2101, -2237, + -2372, -2506, -2639, -2771, -2902, -3033, -3162, -3291, + -3418, -3545, -3671, -3796, -3920, -4044, -4166, -4288, + -4409, -4529, -4649, -4767, -4885, -5002, -5119, -5235, + -5349, -5464, -5577, -5690, -5802, -5913, -6024, -6134, + -6244, -6352, -6461, -6568, -6675, -6781, -6887, -6992, + -7096, -7200, -7303, -7406, -7508, -7609, -7710, -7810, + -7910, -8009, -8108, -8206, -8304, -8401, -8497, -8593, + -8689, -8784, -8878, -8972, -9066, -9159, -9251, -9343, + -9435, -9526, -9617, -9707, -9796, -9886, -9975, -10063, + -10151, -10238, -10325, -10412, -10839, -10923, -11007, -11090, + -11173, -11256, -11338, -11420, -11501, -11583, -11663, -11744, + -11823, -11903, -11982 +}; + +static const u8 chan_mux[DA9052_ADC_VBBAT + 1] = { + [DA9052_ADC_VDDOUT] = DA9052_ADC_MAN_MUXSEL_VDDOUT, + [DA9052_ADC_ICH] = DA9052_ADC_MAN_MUXSEL_ICH, + [DA9052_ADC_TBAT] = DA9052_ADC_MAN_MUXSEL_TBAT, + [DA9052_ADC_VBAT] = DA9052_ADC_MAN_MUXSEL_VBAT, + [DA9052_ADC_IN4] = DA9052_ADC_MAN_MUXSEL_AD4, + [DA9052_ADC_IN5] = DA9052_ADC_MAN_MUXSEL_AD5, + [DA9052_ADC_IN6] = DA9052_ADC_MAN_MUXSEL_AD6, + [DA9052_ADC_VBBAT] = DA9052_ADC_MAN_MUXSEL_VBBAT +}; + +int da9052_adc_manual_read(struct da9052 *da9052, unsigned char channel) +{ + unsigned long timeout; + unsigned short calc_data; + unsigned short data; + int ret; + unsigned char mux_sel; + + if (channel > DA9052_ADC_VBBAT) + return -EINVAL; + + mutex_lock(&da9052->auxadc_lock); + + /* Channel gets activated on enabling the Conversion bit */ + mux_sel = chan_mux[channel] | DA9052_ADC_MAN_MAN_CONV; + + ret = da9052_reg_read(da9052, DA9052_ADC_MAN_REG); + if (ret < 0) + goto err; + + if (ret & DA9052_ADC_MAN_MAN_CONV) { + ret = -EBUSY; + goto err; + } + + ret = da9052_reg_write(da9052, DA9052_ADC_MAN_REG, mux_sel); + if (ret < 0) + goto err; + + timeout = jiffies + msecs_to_jiffies(100); + do { + ret = da9052_reg_read(da9052, DA9052_ADC_MAN_REG); + if (ret < 0) + goto err; + + if (!(ret & DA9052_ADC_MAN_MAN_CONV)) { + timeout = 0; + break; + } + msleep(1); + + } while (time_before(jiffies, timeout)); + + if (timeout != 0) { + ret = -EBUSY; + goto err; + } + + ret = da9052_reg_read(da9052, DA9052_ADC_RES_H_REG); + if (ret < 0) + goto err; + + calc_data = (unsigned short)ret; + data = calc_data << 2; + + ret = da9052_reg_read(da9052, DA9052_ADC_RES_L_REG); + if (ret < 0) + goto err; + + calc_data = (unsigned short)(ret & DA9052_ADC_RES_LSB); + data |= calc_data; + + ret = data; + +err: + mutex_unlock(&da9052->auxadc_lock); + return ret; +} +EXPORT_SYMBOL_GPL(da9052_adc_manual_read); + +int da9052_adc_temperature_read(struct da9052 *da9052) +{ + int tbat; + + tbat = da9052_reg_read(da9052, DA9052_TBAT_RES_REG); + + if (tbat < 0) + return tbat; + + if (tbat == 0) { + pr_debug("TBAT R[90] = 0 is undefined.\n"); + return -EINVAL; + } + + /* ARRAY_SIZE check is not needed since TBAT is a 8-bit register */ + return tbat_lookup[tbat - 1]; +} +EXPORT_SYMBOL_GPL(da9052_adc_temperature_read); + +static struct resource da9052_rtc_resource = { + .name = "ALM", + .start = DA9052_IRQ_ALARM, + .end = DA9052_IRQ_ALARM, + .flags = IORESOURCE_IRQ, +}; + +static struct resource da9052_onkey_resource = { + .name = "ONKEY", + .start = DA9052_IRQ_NONKEY, + .end = DA9052_IRQ_NONKEY, + .flags = IORESOURCE_IRQ, +}; + +static struct resource da9052_power_resources[] = { + { + .name = "BATT TEMP", + .start = DA9052_IRQ_TBAT, + .end = DA9052_IRQ_TBAT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "DCIN DET", + .start = DA9052_IRQ_DCIN, + .end = DA9052_IRQ_DCIN, + .flags = IORESOURCE_IRQ, + }, + { + .name = "DCIN REM", + .start = DA9052_IRQ_DCINREM, + .end = DA9052_IRQ_DCINREM, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS DET", + .start = DA9052_IRQ_VBUS, + .end = DA9052_IRQ_VBUS, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS REM", + .start = DA9052_IRQ_VBUSREM, + .end = DA9052_IRQ_VBUSREM, + .flags = IORESOURCE_IRQ, + }, + { + .name = "CHG END", + .start = DA9052_IRQ_CHGEND, + .end = DA9052_IRQ_CHGEND, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource da9052_tsi_resources[] = { + { + .name = "PENDWN", + .start = DA9052_IRQ_PENDOWN, + .end = DA9052_IRQ_PENDOWN, + .flags = IORESOURCE_IRQ, + }, + { + .name = "TSIRDY", + .start = DA9052_IRQ_TSIREADY, + .end = DA9052_IRQ_TSIREADY, + .flags = IORESOURCE_IRQ, + }, +}; + +int da9052_add_regulator_devices(struct da9052 *da9052, + struct da9052_pdata *pdata) +{ + struct platform_device *pdev; + int i, ret; + + for (i = 0; i < pdata->num_regulators; i++) { + pdev = platform_device_alloc("da9052-regulator", i); + if (!pdev) + return -ENOMEM; + + pdev->dev.parent = da9052->dev; + ret = platform_device_add(pdev); + if (ret) { + platform_device_put(pdev); + return ret; + } + } + + return 0; +} + +static struct mfd_cell __initdata da9052_subdev_info[] = { + {"da9052-onkey", .resources = &da9052_onkey_resource, + .num_resources = 1}, + {"da9052-rtc", .resources = &da9052_rtc_resource, + .num_resources = 1}, + {"da9052-gpio"}, + {"da9052-hwmon"}, + {"da9052-leds"}, + {"da9052-wled1"}, + {"da9052-wled2"}, + {"da9052-wled3"}, + {"da9052-tsi", .resources = da9052_tsi_resources, + .num_resources = ARRAY_SIZE(da9052_tsi_resources)}, + {"da9052-bat", .resources = da9052_power_resources, + .num_resources = ARRAY_SIZE(da9052_power_resources)}, + {"da9052-watchdog"}, +}; + +int da9052_device_init(struct da9052 *da9052, u8 chip_id) +{ + struct da9052_pdata *pdata = da9052->dev->platform_data; + int ret; + + mutex_init(&da9052->io_lock); + mutex_init(&da9052->auxadc_lock); + + if (pdata->init != NULL) + pdata->init(da9052); + + da9052->chip_id = chip_id; + + ret = da9052_add_regulator_devices(da9052, pdata); + if (ret) + goto err; + + ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info, + ARRAY_SIZE(da9052_subdev_info), NULL, 0); + if (ret) + goto err; + + ret = da9052_irq_init(da9052, pdata); + if (ret != 0) + goto err; + + return 0; + +err: + mfd_remove_devices(da9052->dev); + return ret; +} + +void da9052_device_exit(struct da9052 *da9052) +{ + mfd_remove_devices(da9052->dev); + da9052_irq_exit(da9052); +} + +MODULE_AUTHOR("David Dajun Chen <dchen(a)diasemi.com>"); +MODULE_DESCRIPTION("DA9052 MFD Core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c new file mode 100644 index 0000000..0124141 --- /dev/null +++ b/drivers/mfd/da9052-i2c.c @@ -0,0 +1,142 @@ +/* + * I2C access for DA9052 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/device.h> +#include <linux/input.h> +#include <linux/mfd/core.h> +#include <linux/i2c.h> +#include <linux/err.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> + +static int da9052_i2c_enable_multiwrite(struct da9052 *da9052) +{ + int reg_val, ret; + + ret = regmap_read(da9052->regmap, DA9052_CONTROL_B_REG, &reg_val); + if (ret < 0) + return ret; + + if (reg_val & DA9052_CONTROL_B_WRITEMODE) { + reg_val = ~DA9052_CONTROL_B_WRITEMODE; + ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG, + reg_val); + if (ret < 0) + return ret; + } + + return 0; +} + +static struct regmap_config da9052_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int __devinit da9052_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct da9052 *da9052_i2c; + int ret; + + da9052_i2c = kzalloc(sizeof(struct da9052), GFP_KERNEL); + if (!da9052_i2c) + return -ENOMEM; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_info(&client->dev, "Error in %s:i2c_check_functionality\n", + __func__); + return -ENODEV; + } + + da9052_i2c->bustype = BUS_I2C; + da9052_i2c->dev = &client->dev; + + i2c_set_clientdata(client, da9052_i2c); + + da9052_i2c->regmap = regmap_init_i2c(client, &da9052_regmap_config); + if (IS_ERR(da9052_i2c->regmap)) { + ret = PTR_ERR(da9052_i2c->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + goto err; + } + + ret = da9052_i2c_enable_multiwrite(da9052_i2c); + if (ret < 0) + goto err; + + ret = da9052_device_init(da9052_i2c, id->driver_data); + if (ret != 0) + goto err; + + return 0; + +err: + kfree(da9052_i2c); + return ret; +} + +static int da9052_i2c_remove(struct i2c_client *client) +{ + struct da9052 *da9052 = i2c_get_clientdata(client); + + da9052_device_exit(da9052); + kfree(da9052); + + return 0; +} + +static struct i2c_device_id da9052_i2c_id[] = { + {"da9052", DA9052}, + {"da9053-aa", DA9053_AA}, + {"da9053-ba", DA9053_BA}, + {"da9053-bb", DA9053_BB}, + {} +}; + +static struct i2c_driver da9052_i2c_driver = { + .probe = da9052_i2c_probe, + .remove = da9052_i2c_remove, + .id_table = da9052_i2c_id, + .driver = { + .name = "da9052", + .owner = THIS_MODULE, + }, +}; + +static int __init da9052_i2c_init(void) +{ + int ret; + + ret = i2c_add_driver(&da9052_i2c_driver); + if (ret != 0) { + pr_err("DA9052 I2C registration failed %d\n", ret); + return ret; + } + + return 0; +} +subsys_initcall(da9052_i2c_init); + +static void __exit da9052_i2c_exit(void) +{ + i2c_del_driver(&da9052_i2c_driver); +} +module_exit(da9052_i2c_exit); + +MODULE_AUTHOR("David Dajun Chen <dchen(a)diasemi.com>"); +MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/da9052-irq.c b/drivers/mfd/da9052-irq.c new file mode 100644 index 0000000..efbfd79 --- /dev/null +++ b/drivers/mfd/da9052-irq.c @@ -0,0 +1,173 @@ +/* + * Interrupt controller support for Dilaog DA9052 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/mfd/core.h> +#include <linux/interrupt.h> + +#include <linux/mfd/da9052/reg.h> +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/pdata.h> + +#define DA9052_FIXME() {udelay(50); } + +static void da9052_irq_lock(struct irq_data *data) +{ + struct da9052 *da9052 = irq_data_get_irq_chip_data(data); + + mutex_lock(&da9052->irq_lock); +} + +static void da9052_irq_sync_unlock(struct irq_data *data) +{ + struct da9052 *da9052 = irq_data_get_irq_chip_data(data); + unsigned int offset, v; + + offset = (data->irq - da9052->irq_base) / 8; + v = (da9052->events_mask >> (offset * 8)) & 0xff; + + da9052_reg_write(da9052, DA9052_IRQ_MASK_A_REG + offset, v); + + mutex_unlock(&da9052->irq_lock); +} + +static void da9052_irq_unmask(struct irq_data *data) +{ + struct da9052 *da9052 = irq_data_get_irq_chip_data(data); + unsigned int mask; + + mask = 1 << ((data->irq - da9052->irq_base) % 8); + + da9052->events_mask &= ~mask; +} + +static void da9052_irq_mask(struct irq_data *data) +{ + struct da9052 *da9052 = irq_data_get_irq_chip_data(data); + unsigned int mask; + + mask = 1 << ((data->irq - da9052->irq_base) % 8); + + da9052->events_mask |= mask; +} + +int da9052_read_events(struct da9052 *da9052, unsigned char reg, + unsigned int *events) +{ + uint8_t v[4] = {0, 0, 0, 0}; + int ret; + + ret = da9052_group_read(da9052, reg, 4, v); + if (ret < 0) + return ret; + + *events = (v[3] << 24) | (v[2] << 16) | (v[1] << 8) | v[0]; + + return 0; +} + +static irqreturn_t da9052_irq_thread(int irq, void *data) +{ + struct da9052 *da9052 = data; + uint8_t v[4] = {0xFF, 0xFF, 0xFF, 0xFF}; + unsigned short i; + unsigned int events; + + if (da9052_read_events(da9052, DA9052_EVENT_A_REG, &events)) + goto err; + + events &= ~da9052->events_mask; + + if (events == 0) + goto err; + + for (i = 0; i < 32; i++) { + if (events & (1 << i)) + handle_nested_irq(da9052->irq_base + i); + } + + da9052_group_write(da9052, DA9052_EVENT_A_REG, 4, v); + + if (da9052->chip_id == DA9052 || da9052->chip_id == DA9053_AA) + DA9052_FIXME(); + + return IRQ_HANDLED; + +err: + return IRQ_NONE; +} + +static struct irq_chip da9052_irq_chip = { + .name = "da9052", + .irq_bus_lock = da9052_irq_lock, + .irq_bus_sync_unlock = da9052_irq_sync_unlock, + .irq_mask = da9052_irq_mask, + .irq_unmask = da9052_irq_unmask, +}; + +int da9052_irq_init(struct da9052 *da9052, struct da9052_pdata *pdata) +{ + int cur_irq; + int ret; + int events; + + da9052->chip_irq = pdata->irq; + da9052->irq_base = pdata->irq_base; + + if (!da9052->chip_irq) { + dev_err(da9052->dev, "No IRQ configured\n"); + return -EINVAL; + } + + mutex_init(&da9052->irq_lock); + + da9052_read_events(da9052, DA9052_IRQ_MASK_A_REG, &events); + da9052->events_mask = events; + + for (cur_irq = da9052->irq_base; cur_irq < 32 + da9052->irq_base; + cur_irq++) { + irq_set_chip_data(cur_irq, da9052); + irq_set_chip_and_handler(cur_irq, &da9052_irq_chip, + handle_simple_irq); + irq_set_nested_thread(cur_irq, 1); + + /* ARM needs us to explicitly flag the IRQ as valid + * and will set them noprobe when we do so. */ +#ifdef CONFIG_ARM + set_irq_flags(cur_irq, IRQF_VALID); +#else + set_irq_noprobe(cur_irq); +#endif + } + + ret = request_threaded_irq(da9052->chip_irq, NULL, da9052_irq_thread, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "da9052", da9052); + if (ret != 0) { + dev_err(da9052->dev, "Failed to request IRQ %d: %d\n", + da9052->chip_irq, ret); + return ret; + } + + return 0; +} + +void da9052_irq_exit(struct da9052 *da9052) +{ + if (da9052->chip_irq) + free_irq(da9052->chip_irq, da9052); +} diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c new file mode 100644 index 0000000..6025eb7 --- /dev/null +++ b/drivers/mfd/da9052-spi.c @@ -0,0 +1,166 @@ +/* + * SPI access for Dialog DA9052 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/device.h> +#include <linux/input.h> +#include <linux/mfd/core.h> +#include <linux/spi/spi.h> +#include <linux/err.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> + +static struct regmap_config da9052_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int da9052_spi_probe(struct spi_device *spi) +{ + int ret; + u8 chip_id = 0; + struct da9052 *da9052_spi = kzalloc(sizeof(struct da9052), GFP_KERNEL); + + if (!da9052_spi) + return -ENOMEM; + + if (strcmp(spi->modalias, "da9052") == 0) + chip_id = DA9052; + else if (strcmp(spi->modalias, "da9053-aa") == 0) + chip_id = DA9053_AA; + else if (strcmp(spi->modalias, "da9053-ba") == 0) + chip_id = DA9053_BA; + else if (strcmp(spi->modalias, "da9053-bb") == 0) + chip_id = DA9053_BB; + + spi->mode = SPI_MODE_0 | SPI_CPOL; + spi->bits_per_word = 8; + spi_setup(spi); + + da9052_spi->bustype = BUS_SPI; + da9052_spi->dev = &spi->dev; + da9052_spi->spi_dev = spi; + + dev_set_drvdata(&spi->dev, da9052_spi); + + da9052_spi->regmap = regmap_init_spi(spi, &da9052_regmap_config); + if (IS_ERR(da9052_spi->regmap)) { + ret = PTR_ERR(da9052_spi->regmap); + dev_err(&spi->dev, "Failed to allocate register map: %d\n", + ret); + goto err; + } + + ret = da9052_device_init(da9052_spi, chip_id); + if (ret != 0) + goto err; + + return 0; + +err: + kfree(da9052_spi); + return ret; +} + +static int da9052_spi_remove(struct spi_device *spi) +{ + struct da9052 *da9052 = dev_get_drvdata(&spi->dev); + + da9052_device_exit(da9052); + kfree(da9052); + + return 0; +} + +static struct spi_driver da9052_spi_driver = { + .probe = da9052_spi_probe, + .remove = __devexit_p(da9052_spi_remove), + .driver = { + .name = "da9052", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, +}; + +static struct spi_driver da9053_aa_spi_driver = { + .probe = da9052_spi_probe, + .remove = __devexit_p(da9052_spi_remove), + .driver = { + .name = "da9053-aa", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, +}; + +static struct spi_driver da9053_ba_spi_driver = { + .probe = da9052_spi_probe, + .remove = __devexit_p(da9052_spi_remove), + .driver = { + .name = "da9053-ba", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, +}; + +static struct spi_driver da9053_bb_spi_driver = { + .probe = da9052_spi_probe, + .remove = __devexit_p(da9052_spi_remove), + .driver = { + .name = "da9053-bb", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, +}; + +static int __init da9052_spi_init(void) +{ + int ret; + + ret = spi_register_driver(&da9052_spi_driver); + if (ret != 0) { + pr_err("Failed to register DA9052 SPI driver, %d\n", ret); + return ret; + } + + ret = spi_register_driver(&da9053_aa_spi_driver); + if (ret != 0) { + pr_err("Failed to register DA9053-AA SPI driver, %d\n", ret); + return ret; + } + + ret = spi_register_driver(&da9053_ba_spi_driver); + if (ret != 0) { + pr_err("Failed to register DA9053-BA SPI driver, %d\n", ret); + return ret; + } + + ret = spi_register_driver(&da9053_bb_spi_driver); + if (ret != 0) { + pr_err("Failed to register DA9053-BB SPI driver, %d\n", ret); + return ret; + } + + return 0; +} +subsys_initcall(da9052_spi_init); + +static void __exit da9052_spi_exit(void) +{ + spi_unregister_driver(&da9052_spi_driver); +} +module_exit(da9052_spi_exit); + +MODULE_AUTHOR("David Dajun Chen <dchen(a)diasemi.com>"); +MODULE_DESCRIPTION("SPI driver for Dialog DA9052 PMIC"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h new file mode 100644 index 0000000..d5480ea --- /dev/null +++ b/include/linux/mfd/da9052/da9052.h @@ -0,0 +1,139 @@ +/* + * da9052 declarations for DA952 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __MFD_DA9052_DA9052_H +#define __MFD_DA9052_DA9052_H + +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/mfd/core.h> + +#include <linux/mfd/da9052/reg.h> + +/* HWMON Channel Definations */ +#define DA9052_ADC_VDDOUT 0 +#define DA9052_ADC_ICH 1 +#define DA9052_ADC_TBAT 2 +#define DA9052_ADC_VBAT 3 +#define DA9052_ADC_IN4 4 +#define DA9052_ADC_IN5 5 +#define DA9052_ADC_IN6 6 +#define DA9052_ADC_TSI 7 +#define DA9052_ADC_TJUNC 8 +#define DA9052_ADC_VBBAT 9 + +enum da9052_chip_id { + DA9052, + DA9053_AA, + DA9053_BA, + DA9053_BB, +}; + +struct da9052_pdata; + +struct da9052 { + struct mutex io_lock; + struct mutex irq_lock; + struct mutex auxadc_lock; + + struct device *dev; + struct spi_device *spi_dev; + struct i2c_client *i2c_client; + struct regmap *regmap; + + int irq_base; + u8 bustype; + u8 chip_id; + u32 events_mask; + + int chip_irq; +}; + +/* ADC API */ +int da9052_adc_manual_read(struct da9052 *da9052, + unsigned char channel); +int da9052_adc_temperature_read(struct da9052 *da9052); + +/* Device I/O API */ +static inline int da9052_reg_read(struct da9052 *da9052, unsigned char reg) +{ + int val, ret; + + if (reg > DA9052_MAX_REG_CNT) { + dev_err(da9052->dev, "invalid reg %x\n", reg); + return -EINVAL; + } + + ret = regmap_read(da9052->regmap, reg, &val); + if (ret < 0) + return ret; + return val; +} + +static inline int da9052_reg_write(struct da9052 *da9052, unsigned char reg, + unsigned char val) +{ + if (reg > DA9052_MAX_REG_CNT) { + dev_err(da9052->dev, "invalid reg %x\n", reg); + return -EINVAL; + } + + return regmap_write(da9052->regmap, reg, val); +} + +static inline int da9052_group_read(struct da9052 *da9052, unsigned char reg, + unsigned reg_cnt, unsigned char *val) +{ + if (reg > DA9052_MAX_REG_CNT) { + dev_err(da9052->dev, "invalid reg %x\n", reg); + return -EINVAL; + } + + return regmap_bulk_read(da9052->regmap, reg, val, reg_cnt); +} + +static inline int da9052_group_write(struct da9052 *da9052, unsigned char reg, + unsigned reg_cnt, unsigned char *val) +{ + return regmap_raw_write(da9052->regmap, reg, val, reg_cnt); +} + +static inline int da9052_reg_update(struct da9052 *da9052, unsigned char reg, + unsigned char bit_mask, unsigned char reg_val) +{ + if (reg > DA9052_MAX_REG_CNT) { + dev_err(da9052->dev, "invalid reg %x\n", reg); + return -EINVAL; + } + + return regmap_update_bits(da9052->regmap, reg, bit_mask, reg_val); +} + +int da9052_device_init(struct da9052 *da9052, u8 chip_id); +void da9052_device_exit(struct da9052 *da9052); + +int da9052_irq_init(struct da9052 *da9052, struct da9052_pdata *pdata); +void da9052_irq_exit(struct da9052 *da9052); + +#endif /* __MFD_DA9052_DA9052_H */ diff --git a/include/linux/mfd/da9052/pdata.h b/include/linux/mfd/da9052/pdata.h new file mode 100644 index 0000000..b56aa7a --- /dev/null +++ b/include/linux/mfd/da9052/pdata.h @@ -0,0 +1,42 @@ +/* + * Platform data declarations for DA9052 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __MFD_DA9052_PDATA_H__ +#define __MFD_DA9052_PDATA_H__ + +#define DA9052_MAX_REGULATORS 15 + +struct da9052; + +struct da9052_pdata { + struct led_platform_data *pled; + int (*init) (struct da9052 *da9052); + int irq; + int irq_base; + int num_regulators; + int gpio_base; + int use_for_apm; + struct regulator_init_data *regulators[DA9052_MAX_REGULATORS]; +}; + +#endif diff --git a/include/linux/mfd/da9052/reg.h b/include/linux/mfd/da9052/reg.h new file mode 100644 index 0000000..9cbd86f --- /dev/null +++ b/include/linux/mfd/da9052/reg.h @@ -0,0 +1,777 @@ +/* + * Register declarations for DA9052 PMICs. + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __LINUX_MFD_DA9052_REG_H +#define __LINUX_MFD_DA9052_REG_H + +#define DA9052_MAX_REG_CNT 128 + +/*STATUS REGISTERS*/ +#define DA9052_STATUS_A_REG 1 +#define DA9052_STATUS_B_REG 2 +#define DA9052_STATUS_C_REG 3 +#define DA9052_STATUS_D_REG 4 + +/*EVENT REGISTERS*/ +#define DA9052_EVENT_A_REG 5 +#define DA9052_EVENT_B_REG 6 +#define DA9052_EVENT_C_REG 7 +#define DA9052_EVENT_D_REG 8 +#define DA9052_FAULTLOG_REG 9 + +/*IRQ REGISTERS*/ +#define DA9052_IRQ_MASK_A_REG 10 +#define DA9052_IRQ_MASK_B_REG 11 +#define DA9052_IRQ_MASK_C_REG 12 +#define DA9052_IRQ_MASK_D_REG 13 + +/*CONTROL REGISTERS*/ +#define DA9052_CONTROL_A_REG 14 +#define DA9052_CONTROL_B_REG 15 +#define DA9052_CONTROL_C_REG 16 +#define DA9052_CONTROL_D_REG 17 + +#define DA9052_PDDIS_REG 18 +#define DA9052_INTERFACE_REG 19 +#define DA9052_RESET_REG 20 + +/*GPIO REGISTERS*/ +#define DA9052_GPIO_0_1_REG 21 +#define DA9052_GPIO_2_3_REG 22 +#define DA9052_GPIO_4_5_REG 23 +#define DA9052_GPIO_6_7_REG 24 +#define DA9052_GPIO_14_15_REG 28 + +/*LDO AND BUCK REGISTERS*/ +#define DA9052_BUCKA_REG 44 +#define DA9052_BUCKB_REG 45 +#define DA9052_BUCKCORE_REG 46 +#define DA9052_BUCKPRO_REG 47 +#define DA9052_BUCKMEM_REG 48 +#define DA9052_BUCKPERI_REG 49 +#define DA9052_LDO1_REG 50 +#define DA9052_LDO2_REG 51 +#define DA9052_LDO3_REG 52 +#define DA9052_LDO4_REG 53 +#define DA9052_LDO5_REG 54 +#define DA9052_LDO6_REG 55 +#define DA9052_LDO7_REG 56 +#define DA9052_LDO8_REG 57 +#define DA9052_LDO9_REG 58 +#define DA9052_LDO10_REG 59 +#define DA9052_SUPPLY_REG 60 +#define DA9052_PULLDOWN_REG 61 +#define DA9052_CHGBUCK_REG 62 +#define DA9052_WAITCONT_REG 63 +#define DA9052_ISET_REG 64 +#define DA9052_BATCHG_REG 65 + +/*BATTERY CONTROL REGISTRS*/ +#define DA9052_CHG_CONT_REG 66 +#define DA9052_INPUT_CONT_REG 67 +#define DA9052_CHG_TIME_REG 68 +#define DA9052_BBAT_CONT_REG 69 + +/*LED CONTROL REGISTERS*/ +#define DA9052_BOOST_REG 70 +#define DA9052_LED_CONT_REG 71 +#define DA9052_LEDMIN123_REG 72 +#define DA9052_LED1_CONF_REG 73 +#define DA9052_LED2_CONF_REG 74 +#define DA9052_LED3_CONF_REG 75 +#define DA9052_LED1CONT_REG 76 +#define DA9052_LED2CONT_REG 77 +#define DA9052_LED3CONT_REG 78 +#define DA9052_LED_CONT_4_REG 79 +#define DA9052_LED_CONT_5_REG 80 + +/*ADC CONTROL REGISTERS*/ +#define DA9052_ADC_MAN_REG 81 +#define DA9052_ADC_CONT_REG 82 +#define DA9052_ADC_RES_L_REG 83 +#define DA9052_ADC_RES_H_REG 84 +#define DA9052_VDD_RES_REG 85 +#define DA9052_VDD_MON_REG 86 + +/*SM CONTROL REGISTERS*/ +#define DA9052_ICHG_AV_REG 87 +#define DA9052_ICHG_THD_REG 88 +#define DA9052_ICHG_END_REG 89 +#define DA9052_TBAT_RES_REG 90 +#define DA9052_TBAT_HIGHP_REG 91 +#define DA9052_TBAT_HIGHIN_REG 92 +#define DA9052_TBAT_LOW_REG 93 +#define DA9052_T_OFFSET_REG 94 + +/*TSI CONTROL REGISTERS*/ +#define DA9052_TJUNC_RES_REG 104 +#define DA9052_TSI_CONT_A_REG 105 +#define DA9052_TSI_CONT_B_REG 106 +#define DA9052_TSI_X_MSB_REG 107 +#define DA9052_TSI_Y_MSB_REG 108 +#define DA9052_TSI_LSB_REG 109 +#define DA9052_TSI_Z_MSB_REG 110 + +/*RTC COUNT REGISTERS*/ +#define DA9052_COUNT_S_REG 111 +#define DA9052_COUNT_MI_REG 112 +#define DA9052_COUNT_H_REG 113 +#define DA9052_COUNT_D_REG 114 +#define DA9052_COUNT_MO_REG 115 +#define DA9052_COUNT_Y_REG 116 + +/*RTC CONTROL REGISTERS*/ +#define DA9052_ALARM_MI_REG 117 +#define DA9052_ALARM_H_REG 118 +#define DA9052_ALARM_D_REG 119 +#define DA9052_ALARM_MO_REG 120 +#define DA9052_ALARM_Y_REG 121 + +/* Reg Page Configuration */ +#define DA9052_PAGECON0_REGPAGE 0x80 + +/* Onkey Event Registers */ +#define DA9052_M_nONKEY 0x0100 +#define DA9052_E_nONKEY 0x01 + +/* TSI Event Registers */ +#define DA9052_E_PEN_DOWN 0x4000 +#define DA9052_E_TSI_READY 0x8000 + +/* PAGE CONFIGURATION 128 REGISTER */ +#define DA9052_PAGECON128_REGPAGE 0x80 + +/* STATUS REGISTER A */ +#define DA9052_STATUSA_VDATDET 0x80 +#define DA9052_STATUSA_VBUSSEL 0x40 +#define DA9052_STATUSA_DCINSEL 0x20 +#define DA9052_STATUSA_VBUSDET 0x10 +#define DA9052_STATUSA_DCINDET 0x08 +#define DA9052_STATUSA_IDGND 0x04 +#define DA9052_STATUSA_IDFLOAT 0x02 +#define DA9052_STATUSA_NONKEY 0x01 + +/* STATUS REGISTER B */ +#define DA9052_STATUSB_COMPDET 0x80 +#define DA9052_STATUSB_SEQUENCING 0x40 +#define DA9052_STATUSB_GPFB2 0x20 +#define DA9052_STATUSB_CHGTO 0x10 +#define DA9052_STATUSB_CHGEND 0x08 +#define DA9052_STATUSB_CHGLIM 0x04 +#define DA9052_STATUSB_CHGPRE 0x02 +#define DA9052_STATUSB_CHGATT 0x01 + +/* STATUS REGISTER C */ +#define DA9052_STATUSC_GPI7 0x80 +#define DA9052_STATUSC_GPI6 0x40 +#define DA9052_STATUSC_GPI5 0x20 +#define DA9052_STATUSC_GPI4 0x10 +#define DA9052_STATUSC_GPI3 0x08 +#define DA9052_STATUSC_GPI2 0x04 +#define DA9052_STATUSC_GPI1 0x02 +#define DA9052_STATUSC_GPI0 0x01 + +/* STATUS REGISTER D */ +#define DA9052_STATUSD_GPI15 0x80 +#define DA9052_STATUSD_GPI14 0x40 +#define DA9052_STATUSD_GPI13 0x20 +#define DA9052_STATUSD_GPI12 0x10 +#define DA9052_STATUSD_GPI11 0x08 +#define DA9052_STATUSD_GPI10 0x04 +#define DA9052_STATUSD_GPI9 0x02 +#define DA9052_STATUSD_GPI8 0x01 + +/* EVENT REGISTER A */ +#define DA9052_EVENTA_ECOMP1V2 0x80 +#define DA9052_EVENTA_ESEQRDY 0x40 +#define DA9052_EVENTA_EALRAM 0x20 +#define DA9052_EVENTA_EVDDLOW 0x10 +#define DA9052_EVENTA_EVBUSREM 0x08 +#define DA9052_EVENTA_EDCINREM 0x04 +#define DA9052_EVENTA_EVBUSDET 0x02 +#define DA9052_EVENTA_EDCINDET 0x01 + +/* EVENT REGISTER B */ +#define DA9052_EVENTB_ETSIREADY 0x80 +#define DA9052_EVENTB_EPENDOWN 0x40 +#define DA9052_EVENTB_EADCEOM 0x20 +#define DA9052_EVENTB_ETBAT 0x10 +#define DA9052_EVENTB_ECHGEND 0x08 +#define DA9052_EVENTB_EIDGND 0x04 +#define DA9052_EVENTB_EIDFLOAT 0x02 +#define DA9052_EVENTB_ENONKEY 0x01 + +/* EVENT REGISTER C */ +#define DA9052_EVENTC_EGPI7 0x80 +#define DA9052_EVENTC_EGPI6 0x40 +#define DA9052_EVENTC_EGPI5 0x20 +#define DA9052_EVENTC_EGPI4 0x10 +#define DA9052_EVENTC_EGPI3 0x08 +#define DA9052_EVENTC_EGPI2 0x04 +#define DA9052_EVENTC_EGPI1 0x02 +#define DA9052_EVENTC_EGPI0 0x01 + +/* EVENT REGISTER D */ +#define DA9052_EVENTD_EGPI15 0x80 +#define DA9052_EVENTD_EGPI14 0x40 +#define DA9052_EVENTD_EGPI13 0x20 +#define DA9052_EVENTD_EGPI12 0x10 +#define DA9052_EVENTD_EGPI11 0x08 +#define DA9052_EVENTD_EGPI10 0x04 +#define DA9052_EVENTD_EGPI9 0x02 +#define DA9052_EVENTD_EGPI8 0x01 + +/* FAULT LOG REGISTER */ +#define DA9052_FAULTLOG_WAITSET 0x80 +#define DA9052_FAULTLOG_NSDSET 0x40 +#define DA9052_FAULTLOG_KEYSHUT 0x20 +#define DA9052_FAULTLOG_TEMPOVER 0x08 +#define DA9052_FAULTLOG_VDDSTART 0x04 +#define DA9052_FAULTLOG_VDDFAULT 0x02 +#define DA9052_FAULTLOG_TWDERROR 0x01 + +/* CONTROL REGISTER A */ +#define DA9052_CONTROLA_GPIV 0x80 +#define DA9052_CONTROLA_PMOTYPE 0x20 +#define DA9052_CONTROLA_PMOV 0x10 +#define DA9052_CONTROLA_PMIV 0x08 +#define DA9052_CONTROLA_PMIFV 0x08 +#define DA9052_CONTROLA_PWR1EN 0x04 +#define DA9052_CONTROLA_PWREN 0x02 +#define DA9052_CONTROLA_SYSEN 0x01 + +/* CONTROL REGISTER B */ +#define DA9052_CONTROLB_SHUTDOWN 0x80 +#define DA9052_CONTROLB_DEEPSLEEP 0x40 +#define DA9052_CONTROL_B_WRITEMODE 0x20 +#define DA9052_CONTROLB_BBATEN 0x10 +#define DA9052_CONTROLB_OTPREADEN 0x08 +#define DA9052_CONTROLB_AUTOBOOT 0x04 +#define DA9052_CONTROLB_ACTDIODE 0x02 +#define DA9052_CONTROLB_BUCKMERGE 0x01 + +/* CONTROL REGISTER C */ +#define DA9052_CONTROLC_BLINKDUR 0x80 +#define DA9052_CONTROLC_BLINKFRQ 0x60 +#define DA9052_CONTROLC_DEBOUNCING 0x1C +#define DA9052_CONTROLC_PMFB2PIN 0x02 +#define DA9052_CONTROLC_PMFB1PIN 0x01 + +/* CONTROL REGISTER D */ +#define DA9052_CONTROLD_WATCHDOG 0x80 +#define DA9052_CONTROLD_ACCDETEN 0x40 +#define DA9052_CONTROLD_GPI1415SD 0x20 +#define DA9052_CONTROLD_NONKEYSD 0x10 +#define DA9052_CONTROLD_KEEPACTEN 0x08 +#define DA9052_CONTROLD_TWDSCALE 0x07 +/* POWER DOWN DISABLE REGISTER */ +#define DA9052_PDDIS_PMCONTPD 0x80 +#define DA9052_PDDIS_OUT32KPD 0x40 +#define DA9052_PDDIS_CHGBBATPD 0x20 +#define DA9052_PDDIS_CHGPD 0x10 +#define DA9052_PDDIS_HS2WIREPD 0x08 +#define DA9052_PDDIS_PMIFPD 0x04 +#define DA9052_PDDIS_GPADCPD 0x02 +#define DA9052_PDDIS_GPIOPD 0x01 + +/* CONTROL REGISTER D */ +#define DA9052_INTERFACE_IFBASEADDR 0xE0 +#define DA9052_INTERFACE_NCSPOL 0x10 +#define DA9052_INTERFACE_RWPOL 0x08 +#define DA9052_INTERFACE_CPHA 0x04 +#define DA9052_INTERFACE_CPOL 0x02 +#define DA9052_INTERFACE_IFTYPE 0x01 + +/* CONTROL REGISTER D */ +#define DA9052_RESET_RESETEVENT 0xC0 +#define DA9052_RESET_RESETTIMER 0x3F + +/* GPIO REGISTERS */ + +/* GPIO control register */ +#define DA9052_GPIO_EVEN_PORT_PIN 0x03 +#define DA9052_GPIO_EVEN_PORT_TYPE 0x04 +#define DA9052_GPIO_EVEN_PORT_MODE 0x08 + +#define DA9052_GPIO_ODD_PORT_PIN 0x30 +#define DA9052_GPIO_ODD_PORT_TYPE 0x40 +#define DA9052_GPIO_ODD_PORT_MODE 0x80 + +/*POWER SEQUENCER REGISTER*/ + +/* SEQ control register for ID 0 and 1 */ +#define DA9052_ID01_LDO1STEP 0xF0 +#define DA9052_ID01_SYSPRE 0x04 +#define DA9052_ID01_DEFSUPPLY 0x02 +#define DA9052_ID01_nRESMODE 0x01 + +/* SEQ control register for ID 2 and 3 */ +#define DA9052_ID23_LDO3STEP 0xF0 +#define DA9052_ID23_LDO2STEP 0x0F + +/* SEQ control register for ID 4 and 5 */ +#define DA9052_ID45_LDO5STEP 0xF0 +#define DA9052_ID45_LDO4STEP 0x0F + +/* SEQ control register for ID 6 and 7 */ +#define DA9052_ID67_LDO7STEP 0xF0 +#define DA9052_ID67_LDO6STEP 0x0F + +/* SEQ control register for ID 8 and 9 */ +#define DA9052_ID89_LDO9STEP 0xF0 +#define DA9052_ID89_LDO8STEP 0x0F + +/* SEQ control register for ID 10 and 11 */ +#define DA9052_ID1011_PDDISSTEP 0xF0 +#define DA9052_ID1011_LDO10STEP 0x0F + +/* SEQ control register for ID 12 and 13 */ +#define DA9052_ID1213_VMEMSWSTEP 0xF0 +#define DA9052_ID1213_VPERISWSTEP 0x0F + +/* SEQ control register for ID 14 and 15 */ +#define DA9052_ID1415_BUCKPROSTEP 0xF0 +#define DA9052_ID1415_BUCKCORESTEP 0x0F + +/* SEQ control register for ID 16 and 17 */ +#define DA9052_ID1617_BUCKPERISTEP 0xF0 +#define DA9052_ID1617_BUCKMEMSTEP 0x0F + +/* SEQ control register for ID 18 and 19 */ +#define DA9052_ID1819_GPRISE2STEP 0xF0 +#define DA9052_ID1819_GPRISE1STEP 0x0F + +/* SEQ control register for ID 20 and 21 */ +#define DA9052_ID2021_GPFALL2STEP 0xF0 +#define DA9052_ID2021_GPFALL1STEP 0x0F + +/* Power SEQ Status register */ +#define DA9052_SEQSTATUS_SEQPOINTER 0xF0 +#define DA9052_SEQSTATUS_WAITSTEP 0x0F + +/* Power SEQ A register */ +#define DA9052_SEQA_POWEREND 0xF0 +#define DA9052_SEQA_SYSTEMEND 0x0F + +/* Power SEQ B register */ +#define DA9052_SEQB_PARTDOWN 0xF0 +#define DA9052_SEQB_MAXCOUNT 0x0F + +/* Power SEQ TIMER register */ +#define DA9052_SEQTIMER_SEQDUMMY 0xF0 +#define DA9052_SEQTIMER_SEQTIME 0x0F + +/*POWER SUPPLY CONTROL REGISTER*/ + +/* BUCK REGISTER A */ +#define DA9052_BUCKA_BPROILIM 0xC0 +#define DA9052_BUCKA_BPROMODE 0x30 +#define DA9052_BUCKA_BCOREILIM 0x0C +#define DA9052_BUCKA_BCOREMODE 0x03 + +/* BUCK REGISTER B */ +#define DA9052_BUCKB_BERIILIM 0xC0 +#define DA9052_BUCKB_BPERIMODE 0x30 +#define DA9052_BUCKB_BMEMILIM 0x0C +#define DA9052_BUCKB_BMEMMODE 0x03 + +/* BUCKCORE REGISTER */ +#define DA9052_BUCKCORE_BCORECONF 0x80 +#define DA9052_BUCKCORE_BCOREEN 0x40 +#define DA9052_BUCKCORE_VBCORE 0x3F + +/* BUCKPRO REGISTER */ +#define DA9052_BUCKPRO_BPROCONF 0x80 +#define DA9052_BUCKPRO_BPROEN 0x40 +#define DA9052_BUCKPRO_VBPRO 0x3F + +/* BUCKMEM REGISTER */ +#define DA9052_BUCKMEM_BMEMCONF 0x80 +#define DA9052_BUCKMEM_BMEMEN 0x40 +#define DA9052_BUCKMEM_VBMEM 0x3F + +/* BUCKPERI REGISTER */ +#define DA9052_BUCKPERI_BPERICONF 0x80 +#define DA9052_BUCKPERI_BPERIEN 0x40 +#define DA9052_BUCKPERI_BPERIHS 0x20 +#define DA9052_BUCKPERI_VBPERI 0x1F + +/* LDO1 REGISTER */ +#define DA9052_LDO1_LDO1CONF 0x80 +#define DA9052_LDO1_LDO1EN 0x40 +#define DA9052_LDO1_VLDO1 0x1F + +/* LDO2 REGISTER */ +#define DA9052_LDO2_LDO2CONF 0x80 +#define DA9052_LDO2_LDO2EN 0x40 +#define DA9052_LDO2_VLDO2 0x3F + +/* LDO3 REGISTER */ +#define DA9052_LDO3_LDO3CONF 0x80 +#define DA9052_LDO3_LDO3EN 0x40 +#define DA9052_LDO3_VLDO3 0x3F + +/* LDO4 REGISTER */ +#define DA9052_LDO4_LDO4CONF 0x80 +#define DA9052_LDO4_LDO4EN 0x40 +#define DA9052_LDO4_VLDO4 0x3F + +/* LDO5 REGISTER */ +#define DA9052_LDO5_LDO5CONF 0x80 +#define DA9052_LDO5_LDO5EN 0x40 +#define DA9052_LDO5_VLDO5 0x3F + +/* LDO6 REGISTER */ +#define DA9052_LDO6_LDO6CONF 0x80 +#define DA9052_LDO6_LDO6EN 0x40 +#define DA9052_LDO6_VLDO6 0x3F + +/* LDO7 REGISTER */ +#define DA9052_LDO7_LDO7CONF 0x80 +#define DA9052_LDO7_LDO7EN 0x40 +#define DA9052_LDO7_VLDO7 0x3F + +/* LDO8 REGISTER */ +#define DA9052_LDO8_LDO8CONF 0x80 +#define DA9052_LDO8_LDO8EN 0x40 +#define DA9052_LDO8_VLDO8 0x3F + +/* LDO9 REGISTER */ +#define DA9052_LDO9_LDO9CONF 0x80 +#define DA9052_LDO9_LDO9EN 0x40 +#define DA9052_LDO9_VLDO9 0x3F + +/* LDO10 REGISTER */ +#define DA9052_LDO10_LDO10CONF 0x80 +#define DA9052_LDO10_LDO10EN 0x40 +#define DA9052_LDO10_VLDO10 0x3F + +/* SUPPLY REGISTER */ +#define DA9052_SUPPLY_VLOCK 0x80 +#define DA9052_SUPPLY_VMEMSWEN 0x40 +#define DA9052_SUPPLY_VPERISWEN 0x20 +#define DA9052_SUPPLY_VLDO3GO 0x10 +#define DA9052_SUPPLY_VLDO2GO 0x08 +#define DA9052_SUPPLY_VBMEMGO 0x04 +#define DA9052_SUPPLY_VBPROGO 0x02 +#define DA9052_SUPPLY_VBCOREGO 0x01 + +/* PULLDOWN REGISTER */ +#define DA9052_PULLDOWN_LDO5PDDIS 0x20 +#define DA9052_PULLDOWN_LDO2PDDIS 0x10 +#define DA9052_PULLDOWN_LDO1PDDIS 0x08 +#define DA9052_PULLDOWN_MEMPDDIS 0x04 +#define DA9052_PULLDOWN_PROPDDIS 0x02 +#define DA9052_PULLDOWN_COREPDDIS 0x01 + +/* BAT CHARGER REGISTER */ + +/* CHARGER BUCK REGISTER */ +#define DA9052_CHGBUCK_CHGTEMP 0x80 +#define DA9052_CHGBUCK_CHGUSBILIM 0x40 +#define DA9052_CHGBUCK_CHGBUCKLP 0x20 +#define DA9052_CHGBUCK_CHGBUCKEN 0x10 +#define DA9052_CHGBUCK_ISETBUCK 0x0F + +/* WAIT COUNTER REGISTER */ +#define DA9052_WAITCONT_WAITDIR 0x80 +#define DA9052_WAITCONT_RTCCLOCK 0x40 +#define DA9052_WAITCONT_WAITMODE 0x20 +#define DA9052_WAITCONT_EN32KOUT 0x10 +#define DA9052_WAITCONT_DELAYTIME 0x0F + +/* ISET CONTROL REGISTER */ +#define DA9052_ISET_ISETDCIN 0xF0 +#define DA9052_ISET_ISETVBUS 0x0F + +/* BATTERY CHARGER CONTROL REGISTER */ +#define DA9052_BATCHG_ICHGPRE 0xC0 +#define DA9052_BATCHG_ICHGBAT 0x3F + +/* CHARGER COUNTER REGISTER */ +#define DA9052_CHG_CONT_VCHG_BAT 0xF8 +#define DA9052_CHG_CONT_TCTR 0x07 + +/* INPUT CONTROL REGISTER */ +#define DA9052_INPUT_CONT_TCTR_MODE 0x80 +#define DA9052_INPUT_CONT_VBUS_SUSP 0x10 +#define DA9052_INPUT_CONT_DCIN_SUSP 0x08 + +/* CHARGING TIME REGISTER */ +#define DA9052_CHGTIME_CHGTIME 0xFF + +/* BACKUP BATTERY CONTROL REGISTER */ +#define DA9052_BBATCONT_BCHARGERISET 0xF0 +#define DA9052_BBATCONT_BCHARGERVSET 0x0F + +/* LED REGISTERS */ +/* LED BOOST REGISTER */ +#define DA9052_BOOST_EBFAULT 0x80 +#define DA9052_BOOST_MBFAULT 0x40 +#define DA9052_BOOST_BOOSTFRQ 0x20 +#define DA9052_BOOST_BOOSTILIM 0x10 +#define DA9052_BOOST_LED3INEN 0x08 +#define DA9052_BOOST_LED2INEN 0x04 +#define DA9052_BOOST_LED1INEN 0x02 +#define DA9052_BOOST_BOOSTEN 0x01 + +/* LED CONTROL REGISTER */ +#define DA9052_LEDCONT_SELLEDMODE 0x80 +#define DA9052_LEDCONT_LED3ICONT 0x40 +#define DA9052_LEDCONT_LED3RAMP 0x20 +#define DA9052_LEDCONT_LED3EN 0x10 +#define DA9052_LEDCONT_LED2RAMP 0x08 +#define DA9052_LEDCONT_LED2EN 0x04 +#define DA9052_LEDCONT_LED1RAMP 0x02 +#define DA9052_LEDCONT_LED1EN 0x01 + +/* LEDMIN123 REGISTER */ +#define DA9052_LEDMIN123_LEDMINCURRENT 0xFF + +/* LED1CONF REGISTER */ +#define DA9052_LED1CONF_LED1CURRENT 0xFF + +/* LED2CONF REGISTER */ +#define DA9052_LED2CONF_LED2CURRENT 0xFF + +/* LED3CONF REGISTER */ +#define DA9052_LED3CONF_LED3CURRENT 0xFF + +/* LED COUNT REGISTER */ +#define DA9052_LED_CONT_DIM 0x80 + +/* ADC MAN registers */ +#define DA9052_ADC_MAN_MAN_CONV 0x10 +#define DA9052_ADC_MAN_MUXSEL_VDDOUT 0x0 +#define DA9052_ADC_MAN_MUXSEL_ICH 0x01 +#define DA9052_ADC_MAN_MUXSEL_TBAT 0x02 +#define DA9052_ADC_MAN_MUXSEL_VBAT 0x03 +#define DA9052_ADC_MAN_MUXSEL_AD4 0x04 +#define DA9052_ADC_MAN_MUXSEL_AD5 0x05 +#define DA9052_ADC_MAN_MUXSEL_AD6 0x06 +#define DA9052_ADC_MAN_MUXSEL_VBBAT 0x09 + +/* ADC CONTROL regsisters */ +#define DA9052_ADCCONT_COMP1V2EN 0x80 +#define DA9052_ADCCONT_ADCMODE 0x40 +#define DA9052_ADCCONT_TBATISRCEN 0x20 +#define DA9052_ADCCONT_AD4ISRCEN 0x10 +#define DA9052_ADCCONT_AUTOAD6EN 0x08 +#define DA9052_ADCCONT_AUTOAD5EN 0x04 +#define DA9052_ADCCONT_AUTOAD4EN 0x02 +#define DA9052_ADCCONT_AUTOVDDEN 0x01 + +/* ADC 10 BIT MANUAL CONVERSION RESULT LOW register */ +#define DA9052_ADC_RES_LSB 0x03 + +/* ADC 10 BIT MANUAL CONVERSION RESULT HIGH register */ +#define DA9052_ADCRESH_ADCRESMSB 0xFF + +/* VDD RES regsister*/ +#define DA9052_VDDRES_VDDOUTRES 0xFF + +/* VDD MON regsister*/ +#define DA9052_VDDMON_VDDOUTMON 0xFF + +/* ICHG_AV regsister*/ +#define DA9052_ICHGAV_ICHGAV 0xFF + +/* ICHG_THD regsister*/ +#define DA9052_ICHGTHD_ICHGTHD 0xFF + +/* ICHG_END regsister*/ +#define DA9052_ICHGEND_ICHGEND 0xFF + +/* TBAT_RES regsister*/ +#define DA9052_TBATRES_TBATRES 0xFF + +/* TBAT_HIGHP regsister*/ +#define DA9052_TBATHIGHP_TBATHIGHP 0xFF + +/* TBAT_HIGHN regsister*/ +#define DA9052_TBATHIGHN_TBATHIGHN 0xFF + +/* TBAT_LOW regsister*/ +#define DA9052_TBATLOW_TBATLOW 0xFF + +/* T_OFFSET regsister*/ +#define DA9052_TOFFSET_TOFFSET 0xFF + +/* ADCIN4_RES regsister*/ +#define DA9052_ADCIN4RES_ADCIN4RES 0xFF + +/* ADCIN4_HIGH regsister*/ +#define DA9052_AUTO4HIGH_AUTO4HIGH 0xFF + +/* ADCIN4_LOW regsister*/ +#define DA9052_AUTO4LOW_AUTO4LOW 0xFF + +/* ADCIN5_RES regsister*/ +#define DA9052_ADCIN5RES_ADCIN5RES 0xFF + +/* ADCIN5_HIGH regsister*/ +#define DA9052_AUTO5HIGH_AUTOHIGH 0xFF + +/* ADCIN5_LOW regsister*/ +#define DA9052_AUTO5LOW_AUTO5LOW 0xFF + +/* ADCIN6_RES regsister*/ +#define DA9052_ADCIN6RES_ADCIN6RES 0xFF + +/* ADCIN6_HIGH regsister*/ +#define DA9052_AUTO6HIGH_AUTO6HIGH 0xFF + +/* ADCIN6_LOW regsister*/ +#define DA9052_AUTO6LOW_AUTO6LOW 0xFF + +/* TJUNC_RES regsister*/ +#define DA9052_TJUNCRES_TJUNCRES 0xFF + +/* TSI REGISTER */ + +/* TSI Control Register A */ +#define DA9052_TSICONTA_TSIDELAY 0xC0 +#define DA9052_TSICONTA_TSISKIP 0x38 +#define DA9052_TSICONTA_TSIMODE 0x04 +#define DA9052_TSICONTA_PENDETEN 0x02 +#define DA9052_TSICONTA_AUTOTSIEN 0x01 + +/* TSI Control Register B */ +#define DA9052_TSICONTB_ADCREF 0x80 +#define DA9052_TSICONTB_TSIMAN 0x40 +#define DA9052_TSICONTB_TSIMUX 0x30 +#define DA9052_TSICONTB_TSISEL3 0x08 +#define DA9052_TSICONTB_TSISEL2 0x04 +#define DA9052_TSICONTB_TSISEL1 0x02 +#define DA9052_TSICONTB_TSISEL0 0x01 + +/* TSI X Co-ordinate MSB Result register */ +#define DA9052_TSIXMSB_TSIXM 0xFF + +/* TSI Y Co-ordinate MSB Result register */ +#define DA9052_TSIYMSB_TSIYM 0xFF + +/* TSI Co-ordinate LSB Result register */ +#define DA9052_TSILSB_PENDOWN 0x40 +#define DA9052_TSILSB_TSIZL 0x30 +#define DA9052_TSILSB_TSIYL 0x0C +#define DA9052_TSILSB_TSIXL 0x03 + +/* TSI Z Measurement MSB Result register */ +#define DA9052_TSIZMSB_TSIZM 0xFF + +/* RTC REGISTER */ + +/* RTC TIMER SECONDS REGISTER */ +#define DA9052_COUNTS_MONITOR 0x40 +#define DA9052_RTC_SEC 0x3F + +/* RTC TIMER MINUTES REGISTER */ +#define DA9052_RTC_MIN 0x3F + +/* RTC TIMER HOUR REGISTER */ +#define DA9052_RTC_HOUR 0x1F + +/* RTC TIMER DAYS REGISTER */ +#define DA9052_RTC_DAY 0x1F + +/* RTC TIMER MONTHS REGISTER */ +#define DA9052_RTC_MONTH 0x0F + +/* RTC TIMER YEARS REGISTER */ +#define DA9052_RTC_YEAR 0x3F + +/* RTC ALARM MINUTES REGISTER */ +#define DA9052_ALARMM_I_TICK_TYPE 0x80 +#define DA9052_ALARMMI_ALARMTYPE 0x40 + +/* RTC ALARM YEARS REGISTER */ +#define DA9052_ALARM_Y_TICK_ON 0x80 +#define DA9052_ALARM_Y_ALARM_ON 0x40 + +/* RTC SECONDS REGISTER A*/ +#define DA9052_SECONDA_SECONDSA 0xFF + +/* RTC SECONDS REGISTER B*/ +#define DA9052_SECONDB_SECONDSB 0xFF + +/* RTC SECONDS REGISTER C*/ +#define DA9052_SECONDC_SECONDSC 0xFF + +/* RTC SECONDS REGISTER D*/ +#define DA9052_SECONDD_SECONDSD 0xFF + +/* OTP REGISTER */ + +/* CHIP IDENTIFICATION REGISTER */ +#define DA9052_CHIPID_MRC 0xF0 +#define DA9052_CHIPID_TRC 0x0F + +/* CONFIGURATION IDENTIFICATION REGISTER */ +#define DA9052_CONFIGID_CUSTOMERID 0xF8 +#define DA9052_CONFIGID_CONFID 0x07 + +/* OTP CONTROL REGISTER */ +#define DA9052_OTPCONT_GPWRITEDIS 0x80 +#define DA9052_OTPCONT_OTPCONFLOCK 0x40 +#define DA9052_OTPCONT_OTPGPLOCK 0x20 +#define DA9052_OTPCONT_OTPCONFG 0x08 +#define DA9052_OTPCONT_OTPGP 0x04 +#define DA9052_OTPCONT_OTPRP 0x02 +#define DA9052_OTPCONT_OTPTRANSFER 0x01 + +/* RTC OSCILLATOR TRIM REGISTER */ +#define DA9052_OSCTRIM_TRIM32K 0xFF + +/* GP ID REGISTER 0 */ +#define DA9052_GPID0_GP0 0xFF + +/* GP ID REGISTER 1 */ +#define DA9052_GPID1_GP1 0xFF + +/* GP ID REGISTER 2 */ +#define DA9052_GPID2_GP2 0xFF + +/* GP ID REGISTER 3 */ +#define DA9052_GPID3_GP3 0xFF + +/* GP ID REGISTER 4 */ +#define DA9052_GPID4_GP4 0xFF + +/* GP ID REGISTER 5 */ +#define DA9052_GPID5_GP5 0xFF + +/* GP ID REGISTER 6 */ +#define DA9052_GPID6_GP6 0xFF + +/* GP ID REGISTER 7 */ +#define DA9052_GPID7_GP7 0xFF + +/* GP ID REGISTER 8 */ +#define DA9052_GPID8_GP8 0xFF + +/* GP ID REGISTER 9 */ +#define DA9052_GPID9_GP9 0xFF + +#endif +/* __LINUX_MFD_DA9052_REG_H */

14 years

vexpress and 11.08

by Vincent Guittot

Hi, I've tried to use Linaro 11.08 nano image with vexpress 11.08 hwpack but the board hangs in the init script and I never get the shell prompt. if I use the linaro 11.07 nano image with the 11.08 hwpack, the vexpress board boot successfully. Did someone else face the same problem ? Regards, Vincent

14 years

LTTng 2.0 pre-release for ARM

by Avik Sil

Hi, I've put together LTTng 2.0 tools into overlay PPA to use and evaluate it on ARM platforms. LTTng 2.0 [1] is a tracer toolchain that allows integrated kernel and user-space tracing from a single user interface: the "lttng" command. LTTng 2.0 kernel tracer modules build against a vanilla or distribution kernel, without need for additional patches. It is currently in pre-release state to gather feedback from users. I've taken the packages from LTTng Daily Builds PPA [2], modified it to build and run on armel and pushed it to overlay. To install it: $ sudo apt-add-repository ppa:linaro-maintainers/overlay $ sudo apt-get update $ sudo apt-get install lttng-tools lttng-modules-dkms babeltrace To run it, we need to create a session $ sudo lttng create mysession To list the available kernel events: $ sudo lttng list -k Enable all/some events for this session $ sudo lttng enable-event -a -k Start the tracing: $ sudo lttng start By default traces are saved in ~/lttng-traces/mysession-<date>-<time>/ When you're done: $ sudo lttng stop You can then read the trace with babeltrace: $ babeltrace /path/to/trace/dir Please test it and give feedback. Regards, Avik [1] http://lttng.org/lttng2.0 [2] https://launchpad.net/~lttng/+archive/daily

14 years

[Patch 5/11] Regulator: DA9052 regulator support v3

by ashishj3

The DA9052 PMIC has below featured regulators:- 4 DVS Buck converters 0.5V - 3.6V upto 1Amp. 10 Programmable LDO's High PSSR, 1% accuracy. This patch support all the DA9052 regulators. The output voltages are fully programmable via I2C or SPI interface. The platform data with regulation constraints is passed down from the board to the regulator. Signed-off-by: David Dajun Chen <dchen(a)diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam(a)kpitcummins.com> CC: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- Changes since v3 - Corrected verify_range function Changes since v2 - Check for current min_uA < 700000 - Corrected current conversions from mA to uA --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/da9052-regulator.c | 546 ++++++++++++++++++++++++++++++++++ 3 files changed, 554 insertions(+), 0 deletions(-) create mode 100755 drivers/regulator/da9052-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index fa61fe2..ae80461 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -167,6 +167,13 @@ config REGULATOR_DA903X Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. +config REGULATOR_DA9052 + tristate "Dialog DA9052 regulators" + depends on PMIC_DA9052 + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9052 PMIC. + config REGULATOR_PCF50633 tristate "PCF50633 regulator driver" depends on MFD_PCF50633 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 8cb6d0d..3738361 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o +obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c new file mode 100755 index 0000000..a58427e --- /dev/null +++ b/drivers/regulator/da9052-regulator.c @@ -0,0 +1,546 @@ +/* +* da9052-regulator.c: Regulator driver for DA9052 +* +* Copyright(c) 2011 Dialog Semiconductor Ltd. +* +*Author: David Dajun Chen <dchen(a)diasemi.com> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> +#include <linux/mfd/da9052/pdata.h> + +/* Buck step size */ +#define DA9052_BUCK_PERI_3uV_STEP 100000 +#define DA9052_BUCK_PERI_REG_MAP_UPTO_3uV 24 +#define DA9052_CONST_3uV 3000000 + +/* Buck current limits */ +#define DA9052_BUCK_CURRENT_LIMIT_700mA 0 +#define DA9052_BUCK_CURRENT_LIMIT_800mA 1 +#define DA9052_BUCK_CURRENT_LIMIT_1000mA 2 +#define DA9052_BUCK_CURRENT_LIMIT_1200mA 3 + +/* Bit masks */ +#define DA9052_BUCK_ILIM_MASK_EVEN 0x3F +#define DA9052_BUCK_ILIM_MASK_ODD 0xF3 + +struct da9052_regulator_info { + struct regulator_desc reg_desc; + int step_uV; + int min_uV; + int max_uV; + unsigned char volt_shift; + unsigned char en_bit; + unsigned char activate_bit; +}; + +struct da9052_regulator { + struct da9052 *da9052; + struct da9052_regulator_info *info; + struct regulator_dev *rdev; +}; + +static int verify_range(struct da9052_regulator_info *info, + int min_uV, int max_uV) +{ + if (min_uV > info->max_uV || max_uV < info->min_uV) + return -EINVAL; + + return 0; +} + +static int da9052_regulator_enable(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + 1 << info->en_bit, 1); +} + +static int da9052_regulator_disable(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + 1 << info->en_bit, 0); +} + +static int da9052_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + return ret & (1 << info->en_bit); +} + +static int da9052_dcdc_get_current_limit(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKA_REG + offset/2); + if (ret < 0) + return ret; + + /* Determine the even or odd position of the buck current limit + * register field */ + if (offset % 2 == 0) + ret = (ret & DA9052_BUCK_ILIM_MASK_EVEN) >> 2; + else + ret = (ret & DA9052_BUCK_ILIM_MASK_ODD) >> 6; + + return ret; +} + +static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + int offset = rdev_get_id(rdev); + int reg_val; + + if (min_uA > 1200000 || max_uA < 700000) + return -EINVAL; + + if (min_uA <= 700000) + reg_val = DA9052_BUCK_CURRENT_LIMIT_700mA; + else if (min_uA <= 800000) + reg_val = DA9052_BUCK_CURRENT_LIMIT_800mA; + else if (min_uA <= 1000000) + reg_val = DA9052_BUCK_CURRENT_LIMIT_1000mA; + else if (min_uA <= 1200000) + reg_val = DA9052_BUCK_CURRENT_LIMIT_1200mA; + + /* Determine the even or odd position of the buck current limit + * register field */ + if (offset % 2 == 0) + return da9052_reg_update(regulator->da9052, + DA9052_BUCKA_REG + offset/2, + DA9052_BUCK_ILIM_MASK_EVEN, + reg_val << 2); + else + return da9052_reg_update(regulator->da9052, + DA9052_BUCKA_REG + offset/2, + DA9052_BUCK_ILIM_MASK_ODD, + reg_val << 6); +} + +static int da9052_list_buckperi_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int volt_uV; + + if (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) { + volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV) + + info->min_uV); + volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) + * (DA9052_BUCK_PERI_3uV_STEP); + } else + volt_uV = (selector * info->step_uV) + info->min_uV; + + if (volt_uV > info->max_uV) + return -EINVAL; + + return volt_uV; +} + +static int da9052_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int volt_uV; + + volt_uV = info->min_uV + info->step_uV * selector; + + if (volt_uV > info->max_uV) + return -EINVAL; + + return volt_uV; +} + +static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = verify_range(info, min_uV, max_uV); + if (ret < 0) + return ret; + + if (min_uV < info->min_uV) + min_uV = info->min_uV; + + *selector = (min_uV - info->min_uV) / info->step_uV; + + ret = da9052_list_voltage(rdev, *selector); + if (ret < 0) + return ret; + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + (1 << info->volt_shift) - 1, *selector); +} + +static int da9052_set_ldo_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + return da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); +} + +static int da9052_set_ldo5_6_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int ret; + + ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); + if (ret < 0) + return ret; + + /* Some LD0s are DVC controlled which requires enabling of + * the LDO activate bit to implment the changes on the + * LDO output. */ + return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0, + info->activate_bit); +} + +static int da9052_set_dcdc_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int ret; + + ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); + if (ret < 0) + return ret; + + /* Some DCDCs are DVC controlled which requires enabling of + * the DCDC activate bit to implment the changes on the + * DCDC output. */ + return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0, + info->activate_bit); +} + +static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + ret &= ((1 << info->volt_shift) - 1); + + return ret; +} + +static int da9052_set_buckperi_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV, unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = verify_range(info, min_uV, max_uV); + if (ret < 0) + return ret; + + if (min_uV < info->min_uV) + min_uV = info->min_uV; + + if (min_uV >= DA9052_CONST_3uV) + *selector = DA9052_CONST_3uV + ((min_uV - DA9052_CONST_3uV) / + (DA9052_BUCK_PERI_3uV_STEP)); + else + *selector = (min_uV - info->min_uV) / info->step_uV; + + ret = da9052_list_buckperi_voltage(rdev, *selector); + if (ret < 0) + return ret; + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + (1 << info->volt_shift) - 1, *selector); +} + +static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + ret &= ((1 << info->volt_shift) - 1); + + return ret; +} + +static struct regulator_ops da9052_buckperi_ops = { + .list_voltage = da9052_list_buckperi_voltage, + .get_voltage_sel = da9052_get_buckperi_voltage_sel, + .set_voltage = da9052_set_buckperi_voltage, + + .get_current_limit = da9052_dcdc_get_current_limit, + .set_current_limit = da9052_dcdc_set_current_limit, + + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_dcdc_ops = { + .set_voltage = da9052_set_dcdc_voltage, + .get_current_limit = da9052_dcdc_get_current_limit, + .set_current_limit = da9052_dcdc_set_current_limit, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_ldo5_6_ops = { + .set_voltage = da9052_set_ldo5_6_voltage, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_ldo_ops = { + .set_voltage = da9052_set_ldo_voltage, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +#define DA9052_LDO5_6(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "LDO" #_id,\ + .ops = &da9052_ldo5_6_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "LDO" #_id,\ + .ops = &da9052_ldo_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "BUCK" #_id,\ + .ops = &da9052_dcdc_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_BUCKPERI(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "BUCK" #_id,\ + .ops = &da9052_buckperi_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +struct da9052_regulator_info da9052_regulator_info[] = { + /* Buck1 - 4*/ + DA9052_DCDC(0, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), + DA9052_DCDC(1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), + DA9052_DCDC(2, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_BUCKPERI(3, 50, 1800, 3600, 5, 6, 0), + /* LD01 - LDO10*/ + DA9052_LDO(4, 50, 600, 1800, 5, 6, 0), + DA9052_LDO5_6(5, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), + DA9052_LDO5_6(6, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), + DA9052_LDO(7, 25, 1725, 3300, 6, 6, 0), + DA9052_LDO(8, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(9, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(10, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(11, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(12, 50, 1250, 3650, 6, 6, 0), + DA9052_LDO(13, 50, 1200, 3600, 6, 6, 0), +}; + +static inline struct da9052_regulator_info *find_regulator_info(int id) +{ + struct da9052_regulator_info *info; + int i; + + for (i = 0; i < ARRAY_SIZE(da9052_regulator_info); i++) { + info = &da9052_regulator_info[i]; + if (info->reg_desc.id == id) + return info; + } + + return NULL; +} + +static int __devinit da9052_regulator_probe(struct platform_device *pdev) +{ + struct da9052_regulator *regulator; + struct da9052 *da9052; + struct da9052_pdata *pdata; + int ret; + + regulator = kzalloc(sizeof(struct da9052_regulator), GFP_KERNEL); + if (!regulator) + return -ENOMEM; + + da9052 = dev_get_drvdata(pdev->dev.parent); + pdata = da9052->dev->platform_data; + + regulator->info = find_regulator_info(pdev->id); + if (regulator->info == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + ret = -EINVAL; + goto err; + } + + regulator->rdev = regulator_register(&regulator->info->reg_desc, + &pdev->dev, + pdata->regulators[pdev->id], + regulator); + if (IS_ERR(regulator->rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + regulator->info->reg_desc.name); + ret = PTR_ERR(regulator->rdev); + goto err; + } + + platform_set_drvdata(pdev, regulator); + + return 0; +err: + kfree(regulator); + return ret; +} + +static int __devexit da9052_regulator_remove(struct platform_device *pdev) +{ + struct da9052_regulator *regulator = platform_get_drvdata(pdev); + + regulator_unregister(regulator->rdev); + kfree(regulator); + + return 0; +} + +static struct platform_driver da9052_regulator_driver = { + .probe = da9052_regulator_probe, + .remove = __devexit_p(da9052_regulator_remove), + .driver = { + .name = "da9052-regulator", + .owner = THIS_MODULE, + }, +}; + +static int __init da9052_regulator_init(void) +{ + return platform_driver_register(&da9052_regulator_driver); +} +subsys_initcall(da9052_regulator_init); + +static void __exit da9052_regulator_exit(void) +{ + platform_driver_unregister(&da9052_regulator_driver); +} +module_exit(da9052_regulator_exit); + +MODULE_AUTHOR("David Dajun Chen <dchen(a)diasemi.com>"); +MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9052 PMIC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-regulator");

14 years

Connect 2011 Q4 - SoC Technology Group

by Lee Jones

(Go and get yourself a coffee) :) The idea of this new group has gained enough traction such that we have decided to run multiple sessions at Connect. Before we can start to plan the sessions however, we need to gain a better idea of interested parties. So, who and in what capacity do people wish to participate? What is the SoC Technology Group (STG)? Broadly speaking it's a splinter/pseudo group of technical engineers from each applicable Working Group. Although it could easily contain members from Platform, Infrastructure and/or Landing Teams. The primary role of the STG would be to enable feature sets being produced by the Working Groups on each of our supported boards. This team will focus heavily on the upstream kernel. Discussion sessions at Connect Interested parties should be encouraged to attend these sessions. It is here that we shall knock some kind of proposal into shape. There are currently lots of unknowns and loose ends which we need to tie up. Some of the important items shall be mentioned in this email and can be discussed accordingly, others will undoubtedly crop up along the way. A clearly defined road map will need to be defined: 1. Detailing whether we intend to (and are capable of) parallelising development, so that each board is being worked on concurrently. Our members would be less than pleased if we were to prioritise our platforms and theirs were found at the bottom of the list. There are many ways in which we can utilise our limited resources to make this happen, but it will take some careful deliberation in order to figure out an optimal way of working. 2. Detailing which features are the most important for our members. Once decided we need to create a prioritised feature list which will be worked through in sequence. Engineering resources is clearly going to be a touchy subject. Some of the Working Groups are already feeling over-worked and under staffed, but engineers need to come from somewhere. To ease the strain I propose an assignee rotation solution. Swapping out old for new on a per-cycle or per-board enablement basis. The latter is the preferred solution, as it ensures that there are no ends to tie-up and that a feature will be complete before the STG saw fresh blood requiring learning-curve post context-switch. Carrying on with the resources theme, other teams from within Linaro have offered support. As the work is meaningful and interesting there should be no shortage of volunteers. Should the STG consist of members from Platform for instance, or can some of the work be sub-contracted out to them instead? Hacking sessions at Connect Anyone who's interested in undertaking some real coding that will end-up upstream should attend these sessions. There will be plenty of interesting work available to share around. No upstreaming experience necessary. As long as you are capable of turning documentation into functional code I'm sure we can put you to good use. :) Hacking sessions will require clear documentation detailing the APIs for each piece of functionality we wish to enable. Does this already exist? If so, where can it be acquired (http://g.l.o/<wg-tree>/Documentation/)? In the absence of clear documentation, would the WGs provide a Subject Matter Expert (SME) to adopt the role of mentor for the sessions? Or better still, both. As already discussed, we require a detailed, prioritised feature list of missing (i.e. to be coded) and enabled (i.e. fully implemented) features for each board from each of the participating Working Groups. Topics summarised - Discuss: Platform development concurrency strategy - Discuss: Assignee rotation/permanent re-assignment - Required: Documentation - Required: Engineering resources (during the sessions and in the team) - Required: Prioritised missing/enabled feature lists for each platform I think that'll do for now. :) Kind regards, Lee -- Lee Jones Linaro ST-Ericsson Landing Team Lead M: +44 77 88 633 515 Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog

14 years

Announcing linaro-media-create and live-build integration

by Tom Gall

Hi All, As part of the 11.09 cycle I've completed an extension to live-build3 that add linaro-media-create. This means with this branch of linaro's live-build 3 one is able to build your custom image and directly output it to either your SD media or to a file which you an dd directly to the media of your choice. The extension lives in a bzr branch at lp:~tom-gall/live-build/integrate-linaro-media-create This code should be considered beta quality. There are bugs. The code is however useful. It will be especially useful when combined with the cross build support for live-build that was announced as part of the 11.07 cycle. I've updated my HOWTO which can be found here: https://wiki.linaro.org/LiveHelper/Hacking If you run into issues please either file a bug in launchpad https://bugs.launchpad.net/linaro-ubuntu , post to the list, or grab me on irc. (tgall_foo or Dr_Who) -- Regards, Tom "We want great men who, when fortune frowns will not be discouraged." - Colonel Henry Knox Linaro.org │ Open source software for ARM SoCs w) tom.gall att linaro.org w) tom_gall att vnet.ibm.com h) tom_gall att mac.com

14 years

debuild & no secret keys

by Tom Gall

Hi All, I'm setting up a new machine and I'm guessing I must have missed a step or a file. When I debuild -S -sa it's complaining about my secret key not being found. gpg: skipped "Tom Gall <tom.gall(a)linaro.org>": secret key not available gpg: /tmp/debsign.Or3BKbui/live-build_3.0~a21-1linaro9~natty1.dsc: clearsign failed: secret key not available debsign: gpg error occurred! Aborting.... Yet if I gpg -k on both a "good" machine and this new box I see the exact same set of keys listed. Thoughts? -- Regards, Tom "We want great men who, when fortune frowns will not be discouraged." - Colonel Henry Knox Linaro.org │ Open source software for ARM SoCs w) tom.gall att linaro.org w) tom_gall att vnet.ibm.com h) tom_gall att mac.com

14 years

[Activity] Kernel WG Weekly Status report for week ending 2011-09-30

by Mounir Bsaibes

Enclosed please find the link to the Weekly Status report for the kernel working group for the week ending 2011-09-30 == Meeting Minutes == https://wiki.linaro.org/WorkingGroups/Kernel/Meetings/2011-09-26 == Weekly Status Report == https://wiki.linaro.org/WorkingGroups/Kernel/Status/2011-09-29 == Summary == (For more details, refer to the Weekly Status and Meeting Minutes) Planned October deliverables Linaro-Android * Updated, tested and released a Linaro+Android baseline kernel linux-linaro-3.0-2011.09-0-android-1 Kconfig * Resubmitted the config fragment merge script to lkml and got some additional feedback. Device Tree [i.mxq6] Submitted the v3 of i.mx6q patch series. * Reworked the L2 register save/restore implementation per Lorenzo's suggestion * Rebased to Rob's latest GIC OF bindings series * Rebased to Sascha's MULTI_IRQ_HANDLER support series * imfec, gpio and usdhc patches have been merged by sub-system maintainers. [exynos4] * Added DT support for Exynos4 uart driver (using the ckdev support added for Samsung uart driver). * Reworked regulator DT support patches based on comments from Mark/Grant. [vexpress] DT patches posted for review * Started omap mmc driver DT migration. Will use auxdata to start with for all the function pointers currently passed from pdata * smsc911x register size DT fix merged * Worked on adding clkdev support for Samsung uart driver Pin Control * Requested pin control subsystem to be included in linux-next: git:// git.linaro.org/people/triad/linux-pinctrl.git for-next Thumb-2 * Fixing some Thumb-2 related randconfig errors reported by Arnd * A number of stalled Thumb-2 issues: * v6/v7 single kernel Thumb-2 undef fixup patches: currently waiting for Russell/Arnd to comment * pxa/pj4/iwmmxt uses non-Thumb-2-compatible code: waiting for feedback (probably needs a Marvell expert to comment) * tegra2 uses non-Thumb-2-compatible code: waiting for feedback from Colin Cross. Best Regards, Mounir -- Mounir Bsaibes Project Manager Follow Linaro.org: facebook.com/pages/Linaro/155974581091106 http://twitter.com/#!/linaroorg http://www.linaro.org/linaro-blog <http://www.linaro.org/linaro-blog>

14 years

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev September 2011