linaro-dev August 2011

linaro-dev@lists.linaro.org

126 participants
239 discussions

[PATCH] SMDKV310: MMC_SPL: Fix building when using "make O="

by Chander Kashyap

Fixes dependency build error with "make O=" option. "make O=" option is used to specify output directory. Signed-off-by: Chander Kashyap <chander.kashyap(a)linaro.org> --- mmc_spl/board/samsung/smdkv310/Makefile | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/mmc_spl/board/samsung/smdkv310/Makefile b/mmc_spl/board/samsung/smdkv310/Makefile index f1ce066..d4d7ad7 100644 --- a/mmc_spl/board/samsung/smdkv310/Makefile +++ b/mmc_spl/board/samsung/smdkv310/Makefile @@ -40,7 +40,7 @@ CFLAGS += -DCONFIG_PRELOADER SOBJS = start.o mem_setup.o lowlevel_init.o COBJS = mmc_boot.o -SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(OBJTREE)/mmc_spl/board/$(BOARDDIR) @@ -76,25 +76,25 @@ $(mmcobj)u-boot.lds: $(LDSCRIPT) # create symbolic links for common files # from cpu directory -$(obj)start.S: +start.S: @rm -f $@ @ln -s $(TOPDIR)/arch/arm/cpu/armv7/start.S $@ # from board directory -$(obj)mem_setup.S: +mem_setup.S: @rm -f $@ @ln -s $(TOPDIR)/board/samsung/smdkv310/mem_setup.S $@ -$(obj)lowlevel_init.S: +lowlevel_init.S: @rm -f $@ @ln -s $(TOPDIR)/board/samsung/smdkv310/lowlevel_init.S $@ ######################################################################### -$(obj)%.o: $(obj)%.S +$(obj)%.o: %.S $(CC) $(AFLAGS) -c -o $@ $< -$(obj)%.o: $(obj)%.c +$(obj)%.o: %.c $(CC) $(CFLAGS) -c -o $@ $< # defines $(obj).depend target -- 1.7.4.1

14 years

Running a short android-build - LAVA CI cycle

by Paul Sokolovsky

Hello, When testing Android-build to LAVA integration (not the builds themselves), it's sometime beneficial to have quick build cycle which build something (just anything) without error and submits that to LAVA, to avoid ~1hr wait for the normal build. One way to achieve that is to add "MAKE_TARGETS=userdatatarball" to the build config, as exemplified with https://android-build.linaro.org/builds/~pfalcon/lava-test/ . Build then takes ~12mins, lower-bounded by repo checkout time. Of course, that won't produce complete Android build, so validation in LAVA will fail. -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

[PATCH] usb: musb: ux500: set dma config for both src and dst

by Per Forlin

From: Per Forlin <per.forlin(a)linaro.org> The dma driver requires both src and dst to be set. This fix is needed in order to run gadget mass storage. Patch is verified on snowball. Signed-off-by: Per Forlin <per.forlin(a)linaro.org> --- drivers/usb/musb/ux500_dma.c | 16 +++++++--------- 1 files changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index cecace4..2313475 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -133,15 +133,13 @@ static bool ux500_configure_channel(struct dma_channel *channel, DMA_SLAVE_BUSWIDTH_4_BYTES; slave_conf.direction = direction; - if (direction == DMA_FROM_DEVICE) { - slave_conf.src_addr = usb_fifo_addr; - slave_conf.src_addr_width = addr_width; - slave_conf.src_maxburst = 16; - } else { - slave_conf.dst_addr = usb_fifo_addr; - slave_conf.dst_addr_width = addr_width; - slave_conf.dst_maxburst = 16; - } + slave_conf.src_addr = usb_fifo_addr; + slave_conf.src_addr_width = addr_width; + slave_conf.src_maxburst = 16; + slave_conf.dst_addr = usb_fifo_addr; + slave_conf.dst_addr_width = addr_width; + slave_conf.dst_maxburst = 16; + dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, (unsigned long) &slave_conf); -- 1.6.3.3

14 years

[PATCH] usb: musb: cppi: fix build errors due to DBG and missing musb variable

by Per Forlin

From: Per Forlin <per.forlin(a)linaro.org> Replace DBG with dev_dbg add fix invalid access of musb->controller. With this patch cppi_dma builds successfully. Signed-off-by: Per Forlin <per.forlin(a)linaro.org> Cc: <stable(a)kernel.org> --- drivers/usb/musb/cppi_dma.c | 26 +++++++++++++++++--------- 1 files changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 149f3f3..318fb4e 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -226,8 +226,10 @@ static int cppi_controller_stop(struct dma_controller *c) struct cppi *controller; void __iomem *tibase; int i; + struct musb *musb; controller = container_of(c, struct cppi, controller); + musb = controller->musb; tibase = controller->tibase; /* DISABLE INDIVIDUAL CHANNEL Interrupts */ @@ -289,9 +291,11 @@ cppi_channel_allocate(struct dma_controller *c, u8 index; struct cppi_channel *cppi_ch; void __iomem *tibase; + struct musb *musb; controller = container_of(c, struct cppi, controller); tibase = controller->tibase; + musb = controller->musb; /* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */ index = ep->epnum - 1; @@ -339,7 +343,8 @@ static void cppi_channel_release(struct dma_channel *channel) c = container_of(channel, struct cppi_channel, channel); tibase = c->controller->tibase; if (!c->hw_ep) - dev_dbg(musb->controller, "releasing idle DMA channel %p\n", c); + dev_dbg(c->controller->musb->controller, + "releasing idle DMA channel %p\n", c); else if (!c->transmit) core_rxirq_enable(tibase, c->index + 1); @@ -357,10 +362,11 @@ cppi_dump_rx(int level, struct cppi_channel *c, const char *tag) musb_ep_select(base, c->index + 1); - DBG(level, "RX DMA%d%s: %d left, csr %04x, " - "%08x H%08x S%08x C%08x, " - "B%08x L%08x %08x .. %08x" - "\n", + dev_dbg(c->controller->musb->controller, + "RX DMA%d%s: %d left, csr %04x, " + "%08x H%08x S%08x C%08x, " + "B%08x L%08x %08x .. %08x" + "\n", c->index, tag, musb_readl(c->controller->tibase, DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index), @@ -387,10 +393,11 @@ cppi_dump_tx(int level, struct cppi_channel *c, const char *tag) musb_ep_select(base, c->index + 1); - DBG(level, "TX DMA%d%s: csr %04x, " - "H%08x S%08x C%08x %08x, " - "F%08x L%08x .. %08x" - "\n", + dev_dbg(c->controller->musb->controller, + "TX DMA%d%s: csr %04x, " + "H%08x S%08x C%08x %08x, " + "F%08x L%08x .. %08x" + "\n", c->index, tag, musb_readw(c->hw_ep->regs, MUSB_TXCSR), @@ -1022,6 +1029,7 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) int i; dma_addr_t safe2ack; void __iomem *regs = rx->hw_ep->regs; + struct musb *musb = cppi->musb; cppi_dump_rx(6, rx, "/K"); -- 1.6.3.3

14 years

[PATCH] usb: musb: ux500: replace missing DBG with dev_dbg

by Per Forlin

From: Per Forlin <per.forlin(a)linaro.org> ux500_dma.c fail to compile becase DBG has been removed from musb_debug. Use dev_dbg for all prints. Signed-off-by: Per Forlin <per.forlin(a)linaro.org> Acked-by: Mian Yousaf Kaukab<mian.yousaf.kaukab(a)stericsson.com> --- drivers/usb/musb/ux500_dma.c | 22 ++++++++++++++-------- 1 files changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 2313475..ef4333f 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -65,7 +65,8 @@ static void ux500_tx_work(struct work_struct *data) struct musb *musb = hw_ep->musb; unsigned long flags; - DBG(4, "DMA tx transfer done on hw_ep=%d\n", hw_ep->epnum); + dev_dbg(musb->controller, "DMA tx transfer done on hw_ep=%d\n", + hw_ep->epnum); spin_lock_irqsave(&musb->lock, flags); ux500_channel->channel.actual_len = ux500_channel->cur_len; @@ -84,7 +85,8 @@ static void ux500_rx_work(struct work_struct *data) struct musb *musb = hw_ep->musb; unsigned long flags; - DBG(4, "DMA rx transfer done on hw_ep=%d\n", hw_ep->epnum); + dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n", + hw_ep->epnum); spin_lock_irqsave(&musb->lock, flags); ux500_channel->channel.actual_len = ux500_channel->cur_len; @@ -116,9 +118,11 @@ static bool ux500_configure_channel(struct dma_channel *channel, enum dma_slave_buswidth addr_width; dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) + ux500_channel->controller->phy_base); + struct musb *musb = ux500_channel->controller->private_data; - DBG(4, "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", - packet_sz, mode, dma_addr, len, ux500_channel->is_tx); + dev_dbg(musb->controller, + "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", + packet_sz, mode, dma_addr, len, ux500_channel->is_tx); ux500_channel->cur_len = len; @@ -164,6 +168,7 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, struct ux500_dma_controller *controller = container_of(c, struct ux500_dma_controller, controller); struct ux500_dma_channel *ux500_channel = NULL; + struct musb *musb = controller->private_data; u8 ch_num = hw_ep->epnum - 1; u32 max_ch; @@ -190,7 +195,7 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, ux500_channel->hw_ep = hw_ep; ux500_channel->is_allocated = 1; - DBG(7, "hw_ep=%d, is_tx=0x%x, channel=%d\n", + dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n", hw_ep->epnum, is_tx, ch_num); return &(ux500_channel->channel); @@ -199,8 +204,9 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, static void ux500_dma_channel_release(struct dma_channel *channel) { struct ux500_dma_channel *ux500_channel = channel->private_data; + struct musb *musb = ux500_channel->controller->private_data; - DBG(7, "channel=%d\n", ux500_channel->ch_num); + dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num); if (ux500_channel->is_allocated) { ux500_channel->is_allocated = 0; @@ -250,8 +256,8 @@ static int ux500_dma_channel_abort(struct dma_channel *channel) void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs; u16 csr; - DBG(4, "channel=%d, is_tx=%d\n", ux500_channel->ch_num, - ux500_channel->is_tx); + dev_dbg(musb->controller, "channel=%d, is_tx=%d\n", + ux500_channel->ch_num, ux500_channel->is_tx); if (channel->status == MUSB_DMA_STATUS_BUSY) { if (ux500_channel->is_tx) { -- 1.6.3.3

14 years

ARM Cortex-A Programmer's Guide

by Roger Teague

Folks, if you are aware of this .PDF then please ignore. If not then you may find the ARM Coretx-A Programmer Guide a useful resource. Developed earlier this year it's already proving to be a valuable resource if you are looking for more programming tricks for your arsenal. The tone chosen is lighter than the usual ARM documentation and the ARM publications team would be interested in your feedback. Details are in the book . You can get this document at http://bit.ly/CortexAProg<http://www.linkedin.com/redirect?url=http%3A%2F%2Fbit%2Ely%2FCortexAProg&ur…> Unfortunately, we've been forced to put it behind a click-through license and you would therefore need to login to http://www.ARM.com<http://www.linkedin.com/redirect?url=http%3A%2F%2Fwww%2EARM%2Ecom&urlhash=g…>. However, this is the same login for downloads, forums, blog comments, support cases... So it's not for single use! Rgds Roger ------------------------------------------- Roger Teague Director, Software Processor Division ARM Limited 110 Fulbourn Road, Cambridge, CB1 9NJ Tel: +44 1223 406039 Mobile: +44 7500 954 951 ------------------------------------------- -- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

14 years

Android build failure

by Angus Ainslie

I have a android manifest that builds fine on my local build server with -j4 for concurrent makes. The same manifest fails to build on android-build.linaro.org The log is here https://android-build.linaro.org/jenkins/job/angus-akkea_smdkv310/6/console… Is there something I can add to the build variables to disable the concurrent make ? This would be just to debug the manifest file and then re-enable it afterwards Thanks Angus -- Angus Ainslie <angus.ainslie(a)linaro.org> Team Lead, Samsung Landing Team

14 years

Please register a Gerrit account, reminder #2

by Paul Sokolovsky

Hello, Some time this week we're switching to Gerrit for Android source tree hosting. If you committed anything to git.linaro.org/android/* , please make sure you registered an account in Gerrit, by following the instructions below. Thanks, Paul Begin forwarded message: Date: Fri, 22 Jul 2011 00:45:13 +0300 From: Paul Sokolovsky <Paul.Sokolovsky(a)linaro.org> Hello, I'd like to invite all interested parties, Linaro Android team members first of all, to register an account on the upcoming Linaro Gerrit instance at http://android.git.linaro.org . You can find instructions at https://wiki.linaro.org/Platform/Android/Gerrit . [] -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

physical_package_id value

by Daniel Lezcano

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Vincent, I compiled the linux-linaro-3.0 kernel and checked the content of /sys/devices/system/cpu/cpu[0-1]/topology/physical_package_id and found it is equal to '-1'. Is it the expected value ? Thanks -- Daniel - -- <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJONatBAAoJEAKBbMCpUGYAzAYH/0I4+QiF9AhyC70uUgopwaG4 2lVuqfPnCC6/gEWh/mgsNvhKMEXjV+F6A60VhyiQIpGwLUmYzUtKH4ZuG2r5k0Z4 4U3WFIJS1poIixfpOKxXhp8gl/k++v8HBAiQhfsT/FxhQvvxIsy+hb7mGHS2aRl1 GXzCH4Pm0eC6PN/Yy3HQcbYsOK45RmS5bUxr314wmjskiLxFwyhWc00lWvLhf/Jp j41A3D9Bip52Dt12gnQT071/1u1fla1WzxNjxAs7ti4HKGLUq4/ED/Q+h7k6mvkA kUZ+kAzywYcFAEkiafr6lmRqfOK8YOu9pp0KSoubymf1Qa2GYhUIC1DEUvLRCLQ= =q/ln -----END PGP SIGNATURE-----

14 years

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev August 2011