linaro-dev June 2011

linaro-dev@lists.linaro.org

149 participants
196 discussions

[PATCH v3] Add ARM cpu topology definition

by Vincent Guittot

The affinity between ARM processors is defined in the MPIDR register. We can identify which processors are in the same cluster, and which ones have performance interdependency. We can define the cpu topology of ARM platform, that is then used by sched_mc and sched_smt. The default state of sched_mc and sched_smt config is disable. When enabled, the behavior of the scheduler can be modified with sched_mc_power_savings and sched_smt_power_savings sysfs interfaces. Changes since v2 : * Update the commit message and some comments Changes since v1 : * Update the commit message * Add read_cpuid_mpidr in arch/arm/include/asm/cputype.h * Modify header of arch/arm/kernel/topology.c * Modify tests and manipulation of MPIDR's bitfields * Modify the place and dependancy of the config * Modify Noop functions Signed-off-by: Vincent Guittot <vincent.guittot(a)linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria(a)linaro.org> --- arch/arm/Kconfig | 25 +++++++ arch/arm/include/asm/cputype.h | 6 ++ arch/arm/include/asm/topology.h | 33 +++++++++ arch/arm/kernel/Makefile | 1 + arch/arm/kernel/smp.c | 6 ++ arch/arm/kernel/topology.c | 150 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 221 insertions(+), 0 deletions(-) create mode 100644 arch/arm/kernel/topology.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278..f327e55 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1344,6 +1344,31 @@ config SMP_ON_UP If you don't know what to do here, say Y. +config ARM_CPU_TOPOLOGY + bool "Support cpu topology definition" + depends on SMP && CPU_V7 + default y + help + Support ARM cpu topology definition. The MPIDR register defines + affinity between processors which is then used to describe the cpu + topology of an ARM System. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + config HAVE_ARM_SCU bool depends on SMP diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cd4458f..cb47d28 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -8,6 +8,7 @@ #define CPUID_CACHETYPE 1 #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 +#define CPUID_MPIDR 5 #define CPUID_EXT_PFR0 "c1, 0" #define CPUID_EXT_PFR1 "c1, 1" @@ -70,6 +71,11 @@ static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void) return read_cpuid(CPUID_TCM); } +static inline unsigned int __attribute_const__ read_cpuid_mpidr(void) +{ + return read_cpuid(CPUID_MPIDR); +} + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index accbd7c..63a7454 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -1,6 +1,39 @@ #ifndef _ASM_ARM_TOPOLOGY_H #define _ASM_ARM_TOPOLOGY_H +#ifdef CONFIG_ARM_CPU_TOPOLOGY + +#include <linux/cpumask.h> + +struct cputopo_arm { + int thread_id; + int core_id; + int socket_id; + cpumask_t thread_sibling; + cpumask_t core_sibling; +}; + +extern struct cputopo_arm cpu_topology[NR_CPUS]; + +#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) +#define topology_core_id(cpu) (cpu_topology[cpu].core_id) +#define topology_core_cpumask(cpu) (&(cpu_topology[cpu].core_sibling)) +#define topology_thread_cpumask(cpu) (&(cpu_topology[cpu].thread_sibling)) + +#define mc_capable() (cpu_topology[0].socket_id != -1) +#define smt_capable() (cpu_topology[0].thread_id != -1) + +void init_cpu_topology(void); +void store_cpu_topology(unsigned int cpuid); +const struct cpumask *cpu_coregroup_mask(unsigned int cpu); + +#else + +static inline void init_cpu_topology(void) { }; +static inline void store_cpu_topology(unsigned int cpuid) { }; + +#endif + #include <asm-generic/topology.h> #endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index a5b31af..816a481 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_CPU_HAS_PMU) += pmu.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt +obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 344e52b..3e8dc3b 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -31,6 +31,7 @@ #include <asm/cacheflush.h> #include <asm/cpu.h> #include <asm/cputype.h> +#include <asm/topology.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -268,6 +269,9 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); cpu_info->loops_per_jiffy = loops_per_jiffy; + + store_cpu_topology(cpuid); + } /* @@ -354,6 +358,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = num_possible_cpus(); + init_cpu_topology(); + smp_store_cpu_info(smp_processor_id()); /* diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c new file mode 100644 index 0000000..52f5265 --- /dev/null +++ b/arch/arm/kernel/topology.c @@ -0,0 +1,150 @@ +/* + * arch/arm/kernel/topology.c + * + * Copyright (C) 2011 Linaro Limited. + * Written by: Vincent Guittot + * + * based on arch/sh/kernel/topology.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/node.h> +#include <linux/nodemask.h> +#include <linux/sched.h> + +#include <asm/cputype.h> +#include <asm/topology.h> + +#define MPIDR_SMP_BITMASK (0x3 << 30) +#define MPIDR_SMP_VALUE (0x2 << 30) + +#define MPIDR_MT_BITMASK (0x1 << 24) + +/* + * These masks reflect the current use of the affinity levels. + * The affinity level can be up to 16 bits according to ARM ARM + */ + +#define MPIDR_LEVEL0_MASK 0x3 +#define MPIDR_LEVEL0_SHIFT 0 + +#define MPIDR_LEVEL1_MASK 0xF +#define MPIDR_LEVEL1_SHIFT 8 + +#define MPIDR_LEVEL2_MASK 0xFF +#define MPIDR_LEVEL2_SHIFT 16 + +struct cputopo_arm cpu_topology[NR_CPUS]; + +const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +{ + return &(cpu_topology[cpu].core_sibling); +} + +/* + * store_cpu_topology is called at boot when only one cpu is running + * and with the mutex cpu_hotplug.lock locked, when several cpus have booted, + * which prevents simultaneous write access to cpu_topology array + */ +void store_cpu_topology(unsigned int cpuid) +{ + struct cputopo_arm *cpuid_topo = &(cpu_topology[cpuid]); + unsigned int mpidr; + unsigned int cpu; + + /* If the cpu topology has been already set, just return */ + if (cpuid_topo->core_id != -1) + return; + + mpidr = read_cpuid_mpidr(); + + /* create cpu topology mapping */ + if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) { + /* + * This is a multiprocessor system + * multiprocessor format & multiprocessor mode field are set + */ + + if (mpidr & MPIDR_MT_BITMASK) { + /* core performance interdependency */ + cpuid_topo->thread_id = ((mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK); + cpuid_topo->core_id = ((mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK); + cpuid_topo->socket_id = ((mpidr >> MPIDR_LEVEL2_SHIFT) + & MPIDR_LEVEL2_MASK); + } else { + /* largely independent cores */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = ((mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK); + cpuid_topo->socket_id = ((mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK); + } + } else { + /* + * This is an uniprocessor system + * we are in multiprocessor format but uniprocessor system + * or in the old uniprocessor format + */ + + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = 0; + cpuid_topo->socket_id = -1; + } + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); + + if (cpuid_topo->socket_id == cpu_topo->socket_id) { + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id == cpu_topo->core_id) { + cpumask_set_cpu(cpuid, + &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->thread_sibling); + } + } + } + smp_wmb(); + + printk(KERN_INFO "cpu %u : thread %d cpu %d, socket %d, mpidr %x\n", + cpuid, cpu_topology[cpuid].thread_id, + cpu_topology[cpuid].core_id, + cpu_topology[cpuid].socket_id, mpidr); + +} + +/* + * init_cpu_topology is called at boot when only one cpu is running + * which prevent simultaneous write access to cpu_topology array + */ +void init_cpu_topology(void) +{ + unsigned int cpu; + + /* init core mask */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); + + cpu_topo->thread_id = -1; + cpu_topo->core_id = -1; + cpu_topo->socket_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_clear(&cpu_topo->thread_sibling); + } + smp_wmb(); +} -- 1.7.4.1

14 years

Android libjpeg

by Christian Robottom Reis

Hi there, I took a look at the AOSP libjpeg code which is included in git://android.git.kernel.org/platform/external/jpeg during my flight back home (which incidentally had been diverted and landed me in Rio de Janeiro; not sure if I celebrate or cry) and noted the following things: - There is a v6 implementation of the fast IDCT algorithm which lives in armv6_idct.S. - The commit which adds this implementation was added October 2010, and there haven't been any changes since. - The code that selects the decoder IDCT implementation in jddctmgr.c always uses that implementation if ANDROID_ARMV6_IDCT is defined. - Google have an "ashmem" backing store implementation, and have code to enable tile-based mode. It's a fairly non-intrusive change to use ashmem since it just replaces jpeg_open_backing_store. - The code is pretty much standard libjpeg without any structural changes to it. - There isn't any NEON code in this branch. - Mans has an optimized version here: http://git.mansr.com/?p=libjpeg;a=summary I don't know if he's submitted this to AOSP or not. This suggests to me that a simple drop-in of libjpeg-turbo might be actually easy to do, and that there is probably a significant performance benefit to be achieved. One thing to keep in mind is that this code still supports armv6, so we'd probably want to preserve that. Thanks! -- Christian Robottom Reis, Engineering VP Brazil (GMT-3) | [+55] 16 9112 6430 | [+1] 612 216 4935 Linaro.org: Open Source Software for ARM SoCs

14 years

[CALL FOR TESTING] Linaro 11.06 Candidate

by Alexander Sack

Hi, In preparation for the release of Linaro 11.06 images on 2011-06-30, a suitable candidate has been selected for testing. The release is expected to be tested heavily and provide the most stable and feature-rich images to date this cycle. Please help our initiative by testing the official Linaro Evaluation Build (LEB): * Android: http://releases.linaro.org/platform/linaro-n/android/latest/leb-panda/ * Ubuntu: http://releases.linaro.org/platform/linaro-n/ubuntu/leb-panda/latest/ On top of our officially supported Linaro Evaluation Builds images above, the Linaro Platform Team is proud to also provide a set of images prepared by Linaro developers and community for specific target audience. Developers and Community Builds images are provided on a best-effort basis and in the hope that they can be useful. Last reported known to be working images can be found below: * Nano: http://releases.linaro.org/platform/linaro-n/nano/latest/ * ALIP: http://releases.linaro.org/platform/linaro-n/alip/latest/ * Developer: http://releases.linaro.org/platform/linaro-n/developer/latest/ A list of all hardware packs hosted by Linaro Platform can be found below: http://releases.linaro.org/platform/linaro-n/hwpacks/latest/ Please support the Developers and Community Builds images efforts by testing and providing feedback for our builds. As a side note, hwpacks that have an -lt- in their name are outputs from the Linaro Landing teams, using some of their components. Similar to the spirit of the Ubuntu based Developers and Community images, the Linaro Android Platform Team provides a set of vanilla AOSP builds that use Linaro toolchain and the Linaro mainline kernel for development boards that have good enough mainline support to run a full AOSP user experience. Those builds are not officially supported and are provided in the hope that they might be useful. * Android Vanilla AOSP for BeagleBoard-xM: http://releases.linaro.org/platform/linaro-n/android/latest/beaglexm/ * Android Vanilla AOSP for PandaBoard: http://releases.linaro.org/platform/linaro-n/android/latest/panda/ Make your way to the installation instructions: https://wiki.linaro.org/Platform/Android/ImageInstallation https://wiki.linaro.org/Platform/DevPlatform/Ubuntu/ImageInstallation For an explanation of how to test and submit your results to the QA tracker at: http://qatracker.linaro.org For an explanation of how to use the qatracker please see: https://wiki.linaro.org/QA/QATracker Known Issues ============ Android: * Problems with HDMI output on monitors using a hdmi2dvi connector have been reported - See https://launchpad.net/bugs/803014 for more info * Display glitches for the green droids on early splashscreen have been reported - See https://launchpad.net/bugs/795753 for more info * Networking with ethernet requires manual actions to get a connection - See https://launchpad.net/bugs/788746 for a workaround * Mouse falls asleep and need keyboard to wake up - See https://launchpad.net/bugs/772520 has more info * Gallery application does not find any photos - See https://launchpad.net/bugs/772530 for more info * WiFi support is missing in LEB/Android - See https://launchpad.net/bugs/803063 for more info * u-boot 2011.06 is broken for Android beagleXM images - See https://launchpad.net/bugs/803142 for a workaround and fix Ubuntu: * Powering off the panda/LEB causes an oops requiring the user to manually shut down the system - See https://launchpad.net/bugs/788919 * Clicking the "Shutdown" button in LEB/Ubuntu and ALIP causes termination of user session, instead of shutting down the system - See https://launchpad.net/bugs/785279 * On OMAP3 platforms have been reported to not have rendering issues, not updating icons and parts of the screen correctly - See https://launchpad.net/bugs/753878 for details * Sound Output on Beagle Xm and Beagle C is not working without manual actions - See https://launchpad.net/bugs/760919 for workaround * Device Tree support in Linux Linaro hides half of the pandaboard memory. - See https://launchpad.net/bugs/707047 for details * CPU_FREQ support is broken on common OMAP 3 and OMAP 4 kernel binaries - See https://launchpad.net/bugs/784176 for details -- - Alexander

14 years

LAVA Documentation

by Paul Larson

I've started on some basic documentation for LAVA at https://wiki.linaro.org/Platform/Validation/LAVA/Documentation This is mostly aimed at those who are trying to set it up for themselves, or get started on development for it. However I'm also starting to cover example jobs, and will expand that section further to list the available actions and the parameters they can take. It's a wiki, so feel free to add to it, or let me know if there's a particular section you have questions about and want to see expanded sooner. Thanks, Paul Larson

14 years

[PATCH 6/11] HWMON: DA9052 hwmon driver v1

by ashishj3

The DA9052 PMIC provides an Analogue to Digital Converter with 10 bits resolution and 10 channels. This patch montiors the DA9052 PMIC's ADC channels mostly for battery parameters like battery temperature, junction temperature, battery current etc. Signed-off-by: David Dajun Chen <dchen(a)diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam(a)kpitcummins.com> --- Documentation/hwmon/da9052 | 58 ++++++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/da9052-hwmon.c | 332 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 401 insertions(+), 0 deletions(-) create mode 100755 Documentation/hwmon/da9052 create mode 100755 drivers/hwmon/da9052-hwmon.c diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052 new file mode 100755 index 0000000..0b7930f --- /dev/null +++ b/Documentation/hwmon/da9052 @@ -0,0 +1,58 @@ +Kernel driver da9052-hwmon +========================== + +Supported chips: + * Dialog Semiconductors DA9052 PMICs + Prefix: 'da9052' + Datasheet: Kindly visit www.dialog-semiconductor.com and request for the + official datasheet. + +Authors: David Dajun Chen <dchen(a)diasemi.com> + +Description +----------- + +The DA9052 provides an Analogue to Digital Converter (ADC) with 10 bits +resolution and track and hold circuitry combined with an analogue input +multiplexer. The analogue input multiplexer will allow conversion of up to 10 +different inputs. The track and hold circuit ensures stable input voltages at +the input of the ADC during the conversion. + +The ADC is used to measure the following inputs: +Channel 0: VDDOUT - measurement of the system voltage +Channel 1: ICH - internal battery charger current measurement +Channel 2: TBAT - output from the battery NTC +Channel 3: VBAT - measurement of the battery voltage +Channel 4: ADC_IN4 - high impedance input (0 - 2.5V) +Channel 5: ADC_IN5 - high impedance input (0 - 2.5V) +Channel 6: ADC_IN6 - high impedance input (0 - 2.5V) +Channel 7: XY - TSI interface to measure the X and Y voltage of the touch +screen resistive potentiometers +Channel 8: Internal Tjunc. - sense (internal temp. sensor) +Channel 9: VBBAT - measurement of the backup battery voltage + +By using sysfs attributes we can measure the system voltage VDDOUT, the battery +charging current ICH, battery temperature TBAT, battery junction temperature +TJUNC, battery voltage VBAT and the back up battery voltage VBBAT. + +Voltage Monitoring +------------------ + +Voltages are sampled by a 10 bit ADC. Voltages in millivolts are 1.465 +times the ADC value. + +Temperature Monitoring +---------------------- + +Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures +are monitored by the ADC channels. + +The junction temperature is calculated: + Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 +The junction temperature attribute is supported by the driver. + +The battery temperature is calculated: + Degree Celcius = 1 / (t1 + 1/298)- 273 +where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) +Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively. + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 3236a45..da5ff6d 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -303,6 +303,16 @@ config SENSORS_DS1621 This driver can also be built as a module. If so, the module will be called ds1621. +config SENSORS_DA9052_ADC + tristate "Dialog DA9052 HWMON" + depends on PMIC_DA9052 + help + Say y here to support the ADC found on + Dialog Semiconductor DA9052 PMIC. + + This driver can also be built as module. If so, the module + will be called da9052-hwmon. + config SENSORS_I5K_AMB tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" depends on PCI && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index f7c0c28..88b81ca 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_PKGTEMP) += pkgtemp.o +obj-$(CONFIG_SENSORS_DA9052_ADC) += da9052-hwmon.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o obj-$(CONFIG_SENSORS_DS620) += ds620.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o diff --git a/drivers/hwmon/da9052-hwmon.c b/drivers/hwmon/da9052-hwmon.c new file mode 100755 index 0000000..e470e9d --- /dev/null +++ b/drivers/hwmon/da9052-hwmon.c @@ -0,0 +1,332 @@ +/* + * HWMON Driver for Dialog DA9052 + * + * Copyright(c) 2011 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen(a)diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> + +struct da9052_hwmon { + struct da9052 *da9052; + struct device *class_device; + struct mutex hwmon_lock; +}; + +static const char * const input_names[] = { + [DA9052_ADC_VDDOUT] = "VDDOUT", + [DA9052_ADC_ICH] = "CHARGING CURRENT", + [DA9052_ADC_TBAT] = "BATTERY TEMP", + [DA9052_ADC_VBAT] = "BATTERY VOLTAGE", + [DA9052_ADC_IN4] = "ADC IN4", + [DA9052_ADC_IN5] = "ADC IN5", + [DA9052_ADC_IN6] = "ADC IN6", + [DA9052_ADC_TJUNC] = "BATTERY JUNCTION TEMP", + [DA9052_ADC_VBBAT] = "BACK-UP BATTERY VOLTAGE", +}; + +static int da9052_enable_vddout_channel(struct da9052 *da9052) +{ + int ret; + + ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG); + if (ret < 0) + return ret; + + ret |= DA9052_ADCCONT_AUTOVDDEN; + + return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret); +} + +static int da9052_disable_vddout_channel(struct da9052 *da9052) +{ + int ret; + + ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG); + if (ret < 0) + return ret; + + ret &= ~DA9052_ADCCONT_AUTOVDDEN; + + return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret); +} + +static ssize_t da9052_read_vddout(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct da9052_hwmon *hwmon = dev_get_drvdata(dev); + int ret, vdd = -1; + + mutex_lock(&hwmon->hwmon_lock); + + ret = da9052_enable_vddout_channel(hwmon->da9052); + if (ret < 0) + goto hwmon_err; + + ret = da9052_reg_read(hwmon->da9052, DA9052_VDD_RES_REG); + if (ret < 0) + pr_err("failed to read VDD_RES_REG\n"); + else + vdd = ret; + + ret = da9052_disable_vddout_channel(hwmon->da9052); + if (ret < 0) + goto hwmon_err; + + if (vdd >= 0) { + mutex_unlock(&hwmon->hwmon_lock); + return sprintf(buf, "%d\n", vdd); + } + +hwmon_err: + mutex_unlock(&hwmon->hwmon_lock); + return ret; +} + +static ssize_t da9052_read_ich(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct da9052_hwmon *hwmon = dev_get_drvdata(dev); + int ret; + + ret = da9052_reg_read(hwmon->da9052, DA9052_ICHG_AV_REG); + if (ret < 0) + return ret; + + /* Equivalent to 3.9mA/bit in register ICHG_AV */ + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret * 39, 10)); +} + +static ssize_t da9052_read_tbat(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct da9052_hwmon *hwmon = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", da9052_adc_temperature_read(hwmon->da9052)); +} + +static ssize_t da9052_read_vbat(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct da9052_hwmon *hwmon = dev_get_drvdata(dev); + int ret; + + ret = da9052_adc_manual_read(hwmon->da9052, DA9052_ADC_VBAT); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t da9052_read_misc_channel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct da9052_hwmon *hwmon = dev_get_drvdata(dev); + int channel = to_sensor_dev_attr(devattr)->index; + int ret; + + ret = da9052_adc_manual_read(hwmon->da9052, channel); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t da9052_read_tjunc(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct da9052_hwmon *hwmon = dev_get_drvdata(dev); + int tjunc, toffset; + + tjunc = da9052_reg_read(hwmon->da9052, DA9052_TJUNC_RES_REG); + if (tjunc < 0) + return tjunc; + + toffset = da9052_reg_read(hwmon->da9052, DA9052_T_OFFSET_REG); + if (toffset < 0) + return toffset; + + /* Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 */ + return sprintf(buf, "%d\n", 1708 * (tjunc - toffset) - 108800); +} + +static ssize_t da9052_read_vbbat(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct da9052_hwmon *hwmon = dev_get_drvdata(dev); + int ret; + + ret = da9052_adc_manual_read(hwmon->da9052, DA9052_ADC_VBBAT); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + +static ssize_t da9052_hwmon_show_name(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + return sprintf(buf, "da9052-hwmon\n"); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "%s\n", + input_names[to_sensor_dev_attr(devattr)->index]); +} + +static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, da9052_read_vddout, NULL, + DA9052_ADC_ICH); +static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_label, NULL, + DA9052_ADC_ICH); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, da9052_read_vbat, NULL, + DA9052_ADC_VBAT); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, + DA9052_ADC_VBAT); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, da9052_read_misc_channel, NULL, + DA9052_ADC_IN4); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_label, NULL, + DA9052_ADC_IN4); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, da9052_read_misc_channel, NULL, + DA9052_ADC_IN5); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_label, NULL, + DA9052_ADC_IN5); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, da9052_read_misc_channel, NULL, + DA9052_ADC_IN6); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_label, NULL, + DA9052_ADC_IN6); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, da9052_read_vbbat, NULL, + DA9052_ADC_VBBAT); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, + DA9052_ADC_VBBAT); + +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, da9052_read_ich, NULL, + DA9052_ADC_ICH); +static SENSOR_DEVICE_ATTR(curr1_label, S_IRUGO, show_label, NULL, + DA9052_ADC_ICH); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9052_read_tbat, NULL, + DA9052_ADC_TBAT); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, + DA9052_ADC_TBAT); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, da9052_read_tjunc, NULL, + DA9052_ADC_TJUNC); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, + DA9052_ADC_TJUNC); + +static DEVICE_ATTR(name, S_IRUGO, da9052_hwmon_show_name, NULL); + +static struct attribute *da9052_attr[] = { + &dev_attr_name.attr, + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_label.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + NULL +}; + +static const struct attribute_group da9052_attr_group = {.attrs = da9052_attr}; + +static int __init da9052_hwmon_probe(struct platform_device *pdev) +{ + struct da9052_hwmon *hwmon; + int ret; + + hwmon = kzalloc(sizeof(struct da9052_hwmon), GFP_KERNEL); + if (!hwmon) + return -ENOMEM; + + mutex_init(&hwmon->hwmon_lock); + hwmon->da9052 = dev_get_drvdata(pdev->dev.parent); + + platform_set_drvdata(pdev, hwmon); + + ret = sysfs_create_group(&pdev->dev.kobj, &da9052_attr_group); + if (ret) + goto err_mem; + + hwmon->class_device = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon->class_device)) { + ret = PTR_ERR(hwmon->class_device); + goto err_sysfs; + } + + return 0; + +err_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &da9052_attr_group); +err_mem: + kfree(hwmon); + return ret; +} + +static int __devexit da9052_hwmon_remove(struct platform_device *pdev) +{ + struct da9052_hwmon *hwmon = platform_get_drvdata(pdev); + + hwmon_device_unregister(hwmon->class_device); + sysfs_remove_group(&pdev->dev.kobj, &da9052_attr_group); + kfree(hwmon); + + return 0; +} + +static struct platform_driver da9052_hwmon_driver = { + .probe = da9052_hwmon_probe, + .remove = __devexit_p(da9052_hwmon_remove), + .driver = { + .name = "da9052-hwmon", + .owner = THIS_MODULE, + }, +}; + +static int __init da9052_hwmon_init(void) +{ + return platform_driver_register(&da9052_hwmon_driver); +} +module_init(da9052_hwmon_init); + +static void __exit da9052_hwmon_exit(void) +{ + platform_driver_unregister(&da9052_hwmon_driver); +} +module_exit(da9052_hwmon_exit); + +MODULE_AUTHOR("David Dajun Chen <dchen(a)diasemi.com>"); +MODULE_DESCRIPTION("DA9052 HWMON driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-hwmon");

14 years

ARM Porting Jam today!

by Riku Voipio

Dear ARM fans, Linaro Developer Platform team organises every week (Wednesday 14:00 - 18:00 UTC) an ARM porting Jam. The idea is to gather all developers together to fix userspace portability issues across the board. The list of bugs being worked on is at launchpad: https://bugs.launchpad.net/ubuntu/+bugs?field.tag=arm-porting-queue&orderby… Interested in making the software in Ubuntu run better on ARM? Join us on the #linaro channel on irc.linaro.org right now! Cheers, Riku

14 years

[Patch 5/11] Regulator: DA9052 regulator support v1

by ashishj3

The DA9052 PMIC has below featured regulators:- 4 DVS Buck converters 0.5V - 3.6V upto 1Amp. 10 Programmable LDO's High PSSR, 1% accuracy. This patch support all the DA9052 regulators. The output voltages are fully programmable via I2C or SPI interface. The platform data with regulation constraints is passed down from the board to the regulator. Signed-off-by: David Dajun Chen <dchen(a)diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam(a)kpitcummins.com> CC: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/da9052-regulator.c | 543 ++++++++++++++++++++++++++++++++++ 3 files changed, 551 insertions(+), 0 deletions(-) create mode 100755 drivers/regulator/da9052-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index fa61fe2..ae80461 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -167,6 +167,13 @@ config REGULATOR_DA903X Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. +config REGULATOR_DA9052 + tristate "Dialog DA9052 regulators" + depends on PMIC_DA9052 + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9052 PMIC. + config REGULATOR_PCF50633 tristate "PCF50633 regulator driver" depends on MFD_PCF50633 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 8cb6d0d..07d340b 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o +obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c new file mode 100755 index 0000000..f609a5c --- /dev/null +++ b/drivers/regulator/da9052-regulator.c @@ -0,0 +1,543 @@ +/* +* da9052-regulator.c: Regulator driver for DA9052 +* +* Copyright(c) 2011 Dialog Semiconductor Ltd. +* +*Author: David Dajun Chen <dchen(a)diasemi.com> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> +#include <linux/mfd/da9052/pdata.h> + +/* Buck step size */ +#define DA9052_BUCK_PERI_3uV_STEP 100000 +#define DA9052_BUCK_PERI_REG_MAP_UPTO_3uV 24 +#define DA9052_CONST_3uV 3000000 + +/* Buck current limits */ +#define DA9052_BUCK_CURRENT_LIMIT_700mA 0 +#define DA9052_BUCK_CURRENT_LIMIT_800mA 1 +#define DA9052_BUCK_CURRENT_LIMIT_1000mA 2 +#define DA9052_BUCK_CURRENT_LIMIT_1200mA 3 + +/* Bit masks */ +#define DA9052_BUCK_ILIM_MASK_EVEN 0x3F +#define DA9052_BUCK_ILIM_MASK_ODD 0xF3 + +struct da9052_regulator_info { + struct regulator_desc reg_desc; + int step_uV; + int min_uV; + int max_uV; + unsigned char volt_shift; + unsigned char en_bit; + unsigned char activate_bit; +}; + +struct da9052_regulator { + struct da9052 *da9052; + struct da9052_regulator_info *info; + struct regulator_dev *rdev; +}; + +static int verify_range(struct da9052_regulator_info *info, + int min_uV, int max_uV) +{ + if (min_uV < info->min_uV || min_uV > info->max_uV) + return -EINVAL; + if (max_uV < info->min_uV || max_uV > info->max_uV) + return -EINVAL; + + return 0; +} + +static int da9052_regulator_enable(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + 1 << info->en_bit, 1); +} + +static int da9052_regulator_disable(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + 1 << info->en_bit, 0); +} + +static int da9052_regulator_is_enabled(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + return ret & (1 << info->en_bit); +} + +static int da9052_dcdc_get_current_limit(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKA_REG + offset/2); + if (ret < 0) + return ret; + + /* Determine the even or odd position of the buck current limit + * register field */ + if (offset % 2 == 0) + ret = (ret & DA9052_BUCK_ILIM_MASK_EVEN) >> 2; + else + ret = (ret & DA9052_BUCK_ILIM_MASK_ODD) >> 6; + + return ret; +} + +static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + int offset = rdev_get_id(rdev); + int reg_val; + + if (min_uA > 1200000 || max_uA > 1200000) + return -EINVAL; + + if (min_uA == 700) + reg_val = DA9052_BUCK_CURRENT_LIMIT_700mA; + else if (min_uA <= 800) + reg_val = DA9052_BUCK_CURRENT_LIMIT_800mA; + else if (min_uA <= 1000) + reg_val = DA9052_BUCK_CURRENT_LIMIT_1000mA; + else if (min_uA <= 1200) + reg_val = DA9052_BUCK_CURRENT_LIMIT_1200mA; + + /* Determine the even or odd position of the buck current limit + * register field */ + if (offset % 2 == 0) + return da9052_reg_update(regulator->da9052, + DA9052_BUCKA_REG + offset/2, + DA9052_BUCK_ILIM_MASK_EVEN, + reg_val << 2); + else + return da9052_reg_update(regulator->da9052, + DA9052_BUCKA_REG + offset/2, + DA9052_BUCK_ILIM_MASK_ODD, + reg_val << 6); +} + +static int da9052_list_buckperi_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int volt_uV; + + if (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) { + volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV) + + info->min_uV); + volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) + * (DA9052_BUCK_PERI_3uV_STEP); + } else + volt_uV = (selector * info->step_uV) + info->min_uV; + + if (volt_uV > info->max_uV) + return -EINVAL; + + return volt_uV; +} + +static int da9052_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int volt_uV; + + volt_uV = info->min_uV + info->step_uV * selector; + + if (volt_uV > info->max_uV) + return -EINVAL; + + return volt_uV; +} + +static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = verify_range(info, min_uV, max_uV); + if (ret < 0) + return ret; + + *selector = (min_uV - info->min_uV) / info->step_uV; + + ret = da9052_list_voltage(rdev, *selector); + if (ret < 0) + return ret; + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + (1 << info->volt_shift) - 1, *selector); +} + +static int da9052_set_ldo_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + return da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); +} + +static int da9052_set_ldo5_6_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int ret; + + ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); + if (ret < 0) + return ret; + + /* Some LD0s are DVC controlled which requires enabling of + * the LDO activate bit to implment the changes on the + * LDO output. */ + return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0, + info->activate_bit); +} + +static int da9052_set_dcdc_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, + unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int ret; + + ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); + if (ret < 0) + return ret; + + /* Some DCDCs are DVC controlled which requires enabling of + * the DCDC activate bit to implment the changes on the + * DCDC output. */ + return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0, + info->activate_bit); +} + +static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + ret &= ((1 << info->volt_shift) - 1); + + return ret; +} + +static int da9052_set_buckperi_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV, unsigned int *selector) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = verify_range(info, min_uV, max_uV); + if (ret < 0) + return ret; + + if (min_uV >= DA9052_CONST_3uV) + *selector = DA9052_CONST_3uV + ((min_uV - DA9052_CONST_3uV) / + (DA9052_BUCK_PERI_3uV_STEP)); + else + *selector = (min_uV - info->min_uV) / info->step_uV; + + ret = da9052_list_buckperi_voltage(rdev, *selector); + if (ret < 0) + return ret; + + return da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + offset, + (1 << info->volt_shift) - 1, *selector); +} + +static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev) +{ + struct da9052_regulator *regulator = rdev_get_drvdata(rdev); + struct da9052_regulator_info *info = regulator->info; + int offset = rdev_get_id(rdev); + int ret; + + ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); + if (ret < 0) + return ret; + + ret &= ((1 << info->volt_shift) - 1); + + return ret; +} + +static struct regulator_ops da9052_buckperi_ops = { + .list_voltage = da9052_list_buckperi_voltage, + .get_voltage_sel = da9052_get_buckperi_voltage_sel, + .set_voltage = da9052_set_buckperi_voltage, + + .get_current_limit = da9052_dcdc_get_current_limit, + .set_current_limit = da9052_dcdc_set_current_limit, + + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_dcdc_ops = { + .set_voltage = da9052_set_dcdc_voltage, + .get_current_limit = da9052_dcdc_get_current_limit, + .set_current_limit = da9052_dcdc_set_current_limit, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_ldo5_6_ops = { + .set_voltage = da9052_set_ldo5_6_voltage, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +static struct regulator_ops da9052_ldo_ops = { + .set_voltage = da9052_set_ldo_voltage, + + .list_voltage = da9052_list_voltage, + .get_voltage_sel = da9052_get_regulator_voltage_sel, + .is_enabled = da9052_regulator_is_enabled, + .enable = da9052_regulator_enable, + .disable = da9052_regulator_disable, +}; + +#define DA9052_LDO5_6(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "LDO" #_id,\ + .ops = &da9052_ldo5_6_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "LDO" #_id,\ + .ops = &da9052_ldo_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "BUCK" #_id,\ + .ops = &da9052_dcdc_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +#define DA9052_BUCKPERI(_id, step, min, max, sbits, ebits, abits) \ +{\ + .reg_desc = {\ + .name = "BUCK" #_id,\ + .ops = &da9052_buckperi_ops,\ + .type = REGULATOR_VOLTAGE,\ + .id = _id,\ + .owner = THIS_MODULE,\ + },\ + .min_uV = (min) * 1000,\ + .max_uV = (max) * 1000,\ + .step_uV = (step) * 1000,\ + .volt_shift = (sbits),\ + .en_bit = (ebits),\ + .activate_bit = (abits),\ +} + +struct da9052_regulator_info da9052_regulator_info[] = { + /* Buck1 - 4*/ + DA9052_DCDC(0, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), + DA9052_DCDC(1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), + DA9052_DCDC(2, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_BUCKPERI(3, 50, 1800, 3600, 5, 6, 0), + /* LD01 - LDO10*/ + DA9052_LDO(4, 50, 600, 1800, 5, 6, 0), + DA9052_LDO5_6(5, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), + DA9052_LDO5_6(6, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), + DA9052_LDO(7, 25, 1725, 3300, 6, 6, 0), + DA9052_LDO(8, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(9, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(10, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(11, 50, 1200, 3600, 6, 6, 0), + DA9052_LDO(12, 50, 1250, 3650, 6, 6, 0), + DA9052_LDO(13, 50, 1200, 3600, 6, 6, 0), +}; + +static inline struct da9052_regulator_info *find_regulator_info(int id) +{ + struct da9052_regulator_info *info; + int i; + + for (i = 0; i < ARRAY_SIZE(da9052_regulator_info); i++) { + info = &da9052_regulator_info[i]; + if (info->reg_desc.id == id) + return info; + } + + return NULL; +} + +static int __devinit da9052_regulator_probe(struct platform_device *pdev) +{ + struct da9052_regulator *regulator; + struct da9052 *da9052; + struct da9052_pdata *pdata; + int ret; + + regulator = kzalloc(sizeof(struct da9052_regulator), GFP_KERNEL); + if (!regulator) + return -ENOMEM; + + da9052 = dev_get_drvdata(pdev->dev.parent); + pdata = da9052->dev->platform_data; + + regulator->info = find_regulator_info(pdev->id); + if (regulator->info == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + ret = -EINVAL; + goto err; + } + + regulator->rdev = regulator_register(&regulator->info->reg_desc, + &pdev->dev, + pdata->regulators[pdev->id], + regulator); + if (IS_ERR(regulator->rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + regulator->info->reg_desc.name); + ret = PTR_ERR(regulator->rdev); + goto err; + } + + platform_set_drvdata(pdev, regulator); + + return 0; +err: + kfree(regulator); + return ret; +} + +static int __devexit da9052_regulator_remove(struct platform_device *pdev) +{ + struct da9052_regulator *regulator = platform_get_drvdata(pdev); + + regulator_unregister(regulator->rdev); + kfree(regulator); + + return 0; +} + +static struct platform_driver da9052_regulator_driver = { + .probe = da9052_regulator_probe, + .remove = __devexit_p(da9052_regulator_remove), + .driver = { + .name = "da9052-regulator", + .owner = THIS_MODULE, + }, + +}; + +static int __init da9052_regulator_init(void) +{ + return platform_driver_register(&da9052_regulator_driver); +} +subsys_initcall(da9052_regulator_init); + +static void __exit da9052_regulator_exit(void) +{ + platform_driver_unregister(&da9052_regulator_driver); +} +module_exit(da9052_regulator_exit); + +MODULE_AUTHOR("David Dajun Chen <dchen(a)diasemi.com>"); +MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9052 PMIC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-regulator");

14 years

[NOTES] Dev Platforms Status Meeting Notes and Actions 6/23

by Tom Gall

Enclosed you'll find a link to the agenda, notes and actions from the Linaro Developer Platforms Weekly Status meeting held on June 23rd in #linaro-meeting on irc.freenode.net at 14:00 UTC. https://wiki.linaro.org/Platform/DevPlatform/Meetings/2011-06-23 New Actions: * everybody to go over joey's monthly milestones presentation * rsalveti to move the stand-up meeting discussion to email, trying to get more input from others and see if we could try a different process than email * start the linaro evaluation for the linaro dev platform team -- Regards, Tom "We want great men who, when fortune frowns will not be discouraged." - Colonel Henry Knox Linaro.org │ Open source software for ARM SoCs w) tom.gall att linaro.org w) tom_gall att vnet.ibm.com h) tom_gall att mac.com

14 years

[U-BOOT][GIT PULL] Remaining patches for u-boot on i.MX53 QuickStart

by Eric Miao

Hi John, These are the patches not yet merged upstream, but are required for a good enabling of u-boot on i.MX53 QuickStart board. Please consider pull. Thanks The following changes since commit b80e315300b0717be4b273ddb53dbafa483f4066: Efika: fix build breakage (2011-06-22 20:04:02 -0600) are available in the git repository at: git://git.linaro.org/bsp/freescale/u-boot-linaro-natty.git master Eric Miao (2): mx53loco: define ERRATUM_ESDHC111 mx53loco: workaround VPU TO2 Errata by increasing peripheral voltage Jason Liu (3): mx5: Add clock config interface mx53loco: PMIC: Add dialog pmic support mx53loco: Add power init support arch/arm/cpu/armv7/mx5/clock.c | 551 ++++++++++++++++++++++++++++- arch/arm/include/asm/arch-mx5/clock.h | 4 + arch/arm/include/asm/arch-mx5/crm_regs.h | 6 + arch/arm/include/asm/arch-mx5/imx-regs.h | 1 + arch/arm/include/asm/arch-mx5/sys_proto.h | 2 + board/freescale/mx53loco/mx53loco.c | 97 +++++ drivers/misc/Makefile | 1 + drivers/misc/dialog_pmic.c | 123 +++++++ include/configs/mx53loco.h | 15 + include/da9053.h | 186 ++++++++++ 10 files changed, 983 insertions(+), 3 deletions(-) create mode 100644 drivers/misc/dialog_pmic.c create mode 100644 include/da9053.h

14 years

[ACTIVITY] Android Platform Team 2011-06-12 to 2011-06-18

by Zach Pfeffer

== Key Points for wider discussion == * Android LEB is almost done * Pushing to AOSP == Team Highlights == * Started weekly WG and LT integration meetings * Helped debug SGX issue * Continued SPDX work * Almost finished with Pandroid build * LAVA Gtk+ published * AOSP contribution: https://review.source.android.com//#change,23997 * AOSP contribution: https://review.source.android.com//#change,23998 * Tried snowball community distro: Unable to boot * Frans and Bernhard coming onboard == Risks / Issues == * Staff * Licensing == Miscellaneous == * New starters: Frans Gifford, Bernhard Rosenkränzer

14 years

← Newer
1
2
3
4
5
6
7
...
20
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev June 2011