linaro-dev March 2011

linaro-dev@lists.linaro.org

123 participants
172 discussions

[PATCH] only refresh when the clock tree is changed in debugfs

by yong.shen＠linaro.org

This patch is for working item "Allocate the data structures only once instead of at every refresh" at https://blueprints.edge.launchpad.net/linaro-pm-wg/+spec/a-new-tool-to-disp…. source code: http://git.linaro.org/gitweb?p=tools/powerdebug.git;a=summary git tree: git://git.linaro.org/tools/powerdebug.git

14 years, 1 month

a different fix for panda hang

by John Rigby

Nicolas, Today hrw pointed out this patch. It seems to be the proper fix for the panda hang. http://marc.info/?l=linux-omap&m=130021624629574&w=2 John

14 years, 1 month

[PATCH 0/5] add full platform dt clock support for mx51 babbage

by Shawn Guo

This patch set is to add full platform dt clock support for mx51 babbage, based on Jason's basic-mx51-dt patch. All mx51 non-dt clocks in clock-mx51-mx53.c are translated to dt ones. Shawn Guo (5): arm/dts: babbage: add all available clock nodes arm/mxc: add clk member 'rate' to ease dt fixed-clock support arm/dt: mx51: dynamically add clocks per dt nodes arm/dt: mx5: change timer init function to dt clock way of/clock: eliminate function __of_clk_get_from_provider arch/arm/boot/dts/babbage.dts | 495 +++++++++++- arch/arm/mach-mx5/board-dt.c | 9 +- arch/arm/mach-mx5/clock-mx51-mx53.c | 1401 +++++++++++++++++++++++++++++++- arch/arm/plat-mxc/include/mach/clock.h | 4 + drivers/of/clock.c | 23 +- 5 files changed, 1886 insertions(+), 46 deletions(-) Regards, Shawn

14 years, 1 month

LAVA integration effort for Android validation

by Jeremy Chang

Hi, list: I am working on Validation part for Android, in which mainly inclusive of integrating existing benchmark and testing suites into abrek, like 0xbench and android CTS. For now in my thought, if these benchmark/testing can integrate with abrek, then it should be no much problem or extra effort for integrating further into LAVA. Though I have some questions regarding to validation. How to detect the early fail through serial console? like detecting the failure during kernel booting stage also before running init or getting the shell. I think this will be a job issued by the dispatcher though I don't know how this checking mechanism will be done. Would there be anything here needed to do specifically for Android? How to connect the devices in the farm? I checked the wiki page, Platform/Validation/Specs/HardwareSetup [1]. The network will be used. I am thinking what's needed for setting up a network environment for this? The device is needed to fetch a fixed ip by dhcp just after booting up? USB gadget is an alternative for Android and in most situation could be more convenient for personal testing. adb (Android Debug Bridge, running on host side) can connect to a device through USB or TCP/IP. I suppose there are device context for describing how to connect certain device probably, like Android devices. Regarding to remote device registration, adb can list all the attached device but we still need a way to distinguish from each device in the farm. IP is a way to distinguish between each of them, like: $ adb devices List of devices attached emulator-5554 device 192.168.85.102:5555 device Any feedback is appreciated. Thanks. Regards, -Jeremy Chang [1] https://wiki.linaro.org/Platform/Validation/Specs/HardwareSetup

14 years, 1 month

[PATCH] arm/dt: Add dtb make rule

by Rob Herring

From: Rob Herring <rob.herring(a)calxeda.com> Add a make rule to compile dt blobs for ARM. Signed-off-by: Rob Herring <rob.herring(a)calxeda.com> --- arch/arm/Makefile | 3 +++ arch/arm/boot/Makefile | 6 ++++++ 2 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index b49dea6..566763f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -284,6 +284,9 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ +%.dtb: + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index dcf323d..bb63922 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -13,6 +13,8 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh +DTC_FLAGS := -p 1024 + ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif @@ -59,6 +61,10 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE endif +# Rule to build device tree blobs +$(obj)/%.dtb: $(src)/dts/%.dts + $(call cmd,dtc) + quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ -- 1.7.1

14 years, 1 month

[PATCH] [android/devices/linaro/common] Correct permission, owner and group on files in the root tarball

by Patrik Ryd

Fix for LP #731780. --- tasks/mktarball.sh | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++ tasks/tarballs.mk | 4 ++- 2 files changed, 63 insertions(+), 1 deletions(-) create mode 100755 tasks/mktarball.sh diff --git a/tasks/mktarball.sh b/tasks/mktarball.sh new file mode 100755 index 0000000..622ff47 --- /dev/null +++ b/tasks/mktarball.sh @@ -0,0 +1,60 @@ +#!/bin/bash + +# This is a modified copy of build/tools/mktarball.sh + +# $1: path to fs_get_stats program +# $2: start dir +# $3: subdir to tar up (from $2) +# $4: target tar name +# $5: target tarball name (usually $(3).bz2) + +if [ $# -ne 5 ]; then + echo "Error: wrong number of arguments in cmd: $0 $* " + exit 1 +fi + +fs_get_stats=`readlink -f $1` +start_dir=`readlink -f $2` +dir_to_tar=$3 +target_tar=`readlink -f $4` +target_tarball=`readlink -f $5` + +cd $2 + +#tar --no-recursion -cvf ${target_tar} ${dir_to_tar} +rm ${target_tar} > /dev/null 2>&1 + +# do dirs first +subdirs=`find ${dir_to_tar} -type d -print` +files=`find ${dir_to_tar} \! -type d -print` +for f in ${subdirs} ${files} ; do + curr_perms=`stat -c 0%a $f` + [ -d "$f" ] && is_dir=1 || is_dir=0 + f2=`echo ${f#*/}` + new_info=`${fs_get_stats} ${curr_perms} ${is_dir} ${f2}` + new_uid=`echo ${new_info} | awk '{print $1;}'` + new_gid=`echo ${new_info} | awk '{print $2;}'` + new_perms=`echo ${new_info} | awk '{print $3;}'` +# echo "$f: dir: $is_dir curr: $curr_perms uid: $new_uid gid: $new_gid "\ +# "perms: $new_perms" + tar --no-recursion --numeric-owner --owner $new_uid \ + --group $new_gid --mode $new_perms -p -rf ${target_tar} ${f} +done + +if [ $? -eq 0 ] ; then + case "${target_tarball}" in + *.bz2 ) + bzip2 -c ${target_tar} > ${target_tarball} + ;; + *.gz ) + gzip -c ${target_tar} > ${target_tarball} + ;; + esac + success=$? + [ $success -eq 0 ] || rm -f ${target_tarball} + rm -f ${target_tar} + exit $success +fi + +rm -f ${target_tar} +exit 1 diff --git a/tasks/tarballs.mk b/tasks/tarballs.mk index e569e98..e6354fc 100644 --- a/tasks/tarballs.mk +++ b/tasks/tarballs.mk @@ -2,11 +2,13 @@ # Trigger build of tar balls for the linaro boards # +LINARO_MKTARBALL := device/linaro/common/tasks/mktarball.sh + ####### ## root tarball define build-roottarball-target $(hide) echo "Target root fs tarball:" $(INSTALLED_ROOTTARBALL_TARGET) - $(hide) $(MKTARBALL) $(FS_GET_STATS) \ + $(hide) $(LINARO_MKTARBALL) $(FS_GET_STATS) \ $(PRODUCT_OUT)/root . $(PRIVATE_ROOT_TAR) \ $(INSTALLED_ROOTTARBALL_TARGET) endef -- 1.7.1

14 years, 1 month

[PATCH 2/2 android/device/linaro/common] mount mmc partitions instead of mtd partitions

by Jeremy Chang

All partitions from mmc is expected. This depends on Jim Huang's patch "init: support mmc device mount" in android/system/core to work. Signed-off-by: Jeremy Chang <jeremy.chang(a)linaro.org> --- init.rc | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/init.rc b/init.rc index b6a92c5..a3f72e1 100644 --- a/init.rc +++ b/init.rc @@ -90,12 +90,12 @@ loglevel 3 write /dev/cpuctl/bg_non_interactive/cpu.shares 52 on fs -# mount mtd partitions - # Mount /system rw first to give the filesystem a chance to save a checkpoint - mount yaffs2 mtd@system /system - mount yaffs2 mtd@system /system ro remount - mount yaffs2 mtd@userdata /data nosuid nodev - mount yaffs2 mtd@cache /cache nosuid nodev +# mount mmc partitions + mount ext4 mmc@blk0p3 /system + mount ext4 mmc@blk0p3 /system ro remount + mount ext4 mmc@blk0p5 /cache + mount ext4 mmc@blk0p6 /data + mount ext4 mmc@blk0p7 /sdcard on post-fs # once everything is setup, no need to modify / -- 1.7.1

14 years, 1 month

[PATCH V2 0/3] Add MX51 basic DT support

by Jason Liu

From: Jason Liu <r64343(a)freescale.com> This patchset adds FSL mx51 with device tree support. This is based on git://git.secretlab.ca/git/linux-2.6 devicetree/test This patch has been tested on MX51 babbage board and can boot up succesfully to linux console with DT enabled. Jason Liu (3): arm/dt: add basic mx51 device tree support arm/dt: add very basic dts file for babbage board serial/imx: parse from device tree support arch/arm/boot/dts/babbage.dts | 110 +++++++++++++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 8 ++ arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/board-dt.c | 64 ++++++++++++++++++ arch/arm/mach-mx5/clock-mx51-mx53.c | 43 ++++++++++++- arch/arm/plat-mxc/include/mach/common.h | 1 + drivers/tty/serial/imx.c | 79 +++++++++++++++++++--- 7 files changed, 295 insertions(+), 11 deletions(-) create mode 100644 arch/arm/boot/dts/babbage.dts create mode 100644 arch/arm/mach-mx5/board-dt.c

14 years, 1 month

[PATCH android/device/linaro/beagleboard] Delete init.rc

by Jeremy Chang

Move init.rc to the common directory Signed-off-by: Jeremy Chang <jeremy.chang(a)linaro.org> --- AndroidBoard.mk | 2 +- init.rc | 411 ------------------------------------------------------- 2 files changed, 1 insertions(+), 412 deletions(-) delete mode 100644 init.rc diff --git a/AndroidBoard.mk b/AndroidBoard.mk index ea57188..934d19a 100644 --- a/AndroidBoard.mk +++ b/AndroidBoard.mk @@ -22,7 +22,7 @@ include $(BUILD_KEY_CHAR_MAP) file := $(TARGET_ROOT_OUT)/init.rc ALL_PREBUILT += $(file) -$(file) : $(LOCAL_PATH)/init.rc | $(ACP) +$(file) : $(LOCAL_PATH)/../common/init.rc | $(ACP) $(transform-prebuilt-to-target) file := $(TARGET_ROOT_OUT)/init.omap3.rc diff --git a/init.rc b/init.rc deleted file mode 100644 index 50d2dc6..0000000 --- a/init.rc +++ /dev/null @@ -1,411 +0,0 @@ -on early-init - start ueventd - -on init - -sysclktz 0 - -loglevel 3 - -# setup the global environment - export PATH /sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin - export LD_LIBRARY_PATH /vendor/lib:/system/lib - export ANDROID_BOOTLOGO 1 - export ANDROID_ROOT /system - export ANDROID_ASSETS /system/app - export ANDROID_DATA /data - export EXTERNAL_STORAGE /mnt/sdcard - export ASEC_MOUNTPOINT /mnt/asec - export LOOP_MOUNTPOINT /mnt/obb - export BOOTCLASSPATH /system/framework/core.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/android.policy.jar:/system/framework/services.jar:/system/framework/core-junit.jar - -# Backward compatibility - symlink /system/etc /etc - symlink /sys/kernel/debug /d - -# Right now vendor lives on the same filesystem as system, -# but someday that may change. - symlink /system/vendor /vendor - -# create mountpoints - mkdir /mnt 0775 root system - mkdir /mnt/sdcard 0000 system system - -# Create cgroup mount point for cpu accounting - mkdir /acct - mount cgroup none /acct cpuacct - mkdir /acct/uid - -# Backwards Compat - XXX: Going away in G* - symlink /mnt/sdcard /sdcard - - mkdir /system - mkdir /data 0771 system system - mkdir /cache 0770 system cache - mkdir /config 0500 root root - - # Directory for putting things only root should see. - #mkdir /mnt/secure 0700 root root - - # Directory for staging bindmounts - #mkdir /mnt/secure/staging 0700 root root - - # Directory-target for where the secure container - # imagefile directory will be bind-mounted - #mkdir /mnt/secure/asec 0700 root root - - # Secure container public mount points. - #mkdir /mnt/asec 0700 root system - #mount tmpfs tmpfs /mnt/asec mode=0755,gid=1000 - - # Filesystem image public mount points. - #mkdir /mnt/obb 0700 root system - #mount tmpfs tmpfs /mnt/obb mode=0755,gid=1000 - - write /proc/sys/kernel/panic_on_oops 1 - write /proc/sys/kernel/hung_task_timeout_secs 0 - write /proc/cpu/alignment 4 - write /proc/sys/kernel/sched_latency_ns 10000000 - write /proc/sys/kernel/sched_wakeup_granularity_ns 2000000 - write /proc/sys/kernel/sched_compat_yield 1 - write /proc/sys/kernel/sched_child_runs_first 0 - -# Create cgroup mount points for process groups - mkdir /dev/cpuctl - mount cgroup none /dev/cpuctl cpu - chown system system /dev/cpuctl - chown system system /dev/cpuctl/tasks - chmod 0777 /dev/cpuctl/tasks - write /dev/cpuctl/cpu.shares 1024 - - mkdir /dev/cpuctl/fg_boost - chown system system /dev/cpuctl/fg_boost/tasks - chmod 0777 /dev/cpuctl/fg_boost/tasks - write /dev/cpuctl/fg_boost/cpu.shares 1024 - - mkdir /dev/cpuctl/bg_non_interactive - chown system system /dev/cpuctl/bg_non_interactive/tasks - chmod 0777 /dev/cpuctl/bg_non_interactive/tasks - # 5.0 % - write /dev/cpuctl/bg_non_interactive/cpu.shares 52 - -on fs -# mount mtd partitions - # Mount /system rw first to give the filesystem a chance to save a checkpoint - mount yaffs2 mtd@system /system - mount yaffs2 mtd@system /system ro remount - mount yaffs2 mtd@userdata /data nosuid nodev - mount yaffs2 mtd@cache /cache nosuid nodev - -on post-fs - # once everything is setup, no need to modify / - mount rootfs rootfs / rw remount - - # We chown/chmod /data again so because mount is run as root + defaults - chown system system /data - chmod 0771 /data - - # Create dump dir and collect dumps. - # Do this before we mount cache so eventually we can use cache for - # storing dumps on platforms which do not have a dedicated dump partition. - - mkdir /data/dontpanic - chown root log /data/dontpanic - chmod 0750 /data/dontpanic - - # Collect apanic data, free resources and re-arm trigger - copy /proc/apanic_console /data/dontpanic/apanic_console - chown root log /data/dontpanic/apanic_console - chmod 0640 /data/dontpanic/apanic_console - - copy /proc/apanic_threads /data/dontpanic/apanic_threads - chown root log /data/dontpanic/apanic_threads - chmod 0640 /data/dontpanic/apanic_threads - - write /proc/apanic_console 1 - - # Same reason as /data above - chown system cache /cache - chmod 0770 /cache - - # This may have been created by the recovery system with odd permissions - chown system cache /cache/recovery - chmod 0770 /cache/recovery - - #change permissions on vmallocinfo so we can grab it from bugreports - chown root log /proc/vmallocinfo - chmod 0440 /proc/vmallocinfo - - #change permissions on kmsg & sysrq-trigger so bugreports can grab kthread stacks - chown root system /proc/kmsg - chmod 0440 /proc/kmsg - chown root system /proc/sysrq-trigger - chmod 0220 /proc/sysrq-trigger - -# create basic filesystem structure - mkdir /data/misc 01771 system misc - mkdir /data/misc/bluetoothd 0770 bluetooth bluetooth - mkdir /data/misc/bluetooth 0770 system system - mkdir /data/misc/keystore 0700 keystore keystore - mkdir /data/misc/vpn 0770 system system - mkdir /data/misc/systemkeys 0700 system system - mkdir /data/misc/vpn/profiles 0770 system system - # give system access to wpa_supplicant.conf for backup and restore - mkdir /data/misc/wifi 0770 wifi wifi - chmod 0770 /data/misc/wifi - chmod 0660 /data/misc/wifi/wpa_supplicant.conf - mkdir /data/local 0771 shell shell - mkdir /data/local/tmp 0771 shell shell - mkdir /data/data 0771 system system - mkdir /data/app-private 0771 system system - mkdir /data/app 0771 system system - mkdir /data/property 0700 root root - - # create dalvik-cache and double-check the perms - mkdir /data/dalvik-cache 0771 system system - chown system system /data/dalvik-cache - chmod 0771 /data/dalvik-cache - - # create the lost+found directories, so as to enforce our permissions - mkdir /data/lost+found 0770 - mkdir /cache/lost+found 0770 - - # double check the perms, in case lost+found already exists, and set owner - chown root root /data/lost+found - chmod 0770 /data/lost+found - chown root root /cache/lost+found - chmod 0770 /cache/lost+found - -on boot -# basic network init - ifup lo - hostname localhost - domainname localdomain - setprop service.adb.tcp.port 5555 - -# set RLIMIT_NICE to allow priorities from 19 to -20 - setrlimit 13 40 40 - -# Define the oom_adj values for the classes of processes that can be -# killed by the kernel. These are used in ActivityManagerService. - setprop ro.FOREGROUND_APP_ADJ 0 - setprop ro.VISIBLE_APP_ADJ 1 - setprop ro.PERCEPTIBLE_APP_ADJ 2 - setprop ro.HEAVY_WEIGHT_APP_ADJ 3 - setprop ro.SECONDARY_SERVER_ADJ 4 - setprop ro.BACKUP_APP_ADJ 5 - setprop ro.HOME_APP_ADJ 6 - setprop ro.HIDDEN_APP_MIN_ADJ 7 - setprop ro.EMPTY_APP_ADJ 15 - -# Define the memory thresholds at which the above process classes will -# be killed. These numbers are in pages (4k). - setprop ro.FOREGROUND_APP_MEM 2048 - setprop ro.VISIBLE_APP_MEM 3072 - setprop ro.PERCEPTIBLE_APP_MEM 4096 - setprop ro.HEAVY_WEIGHT_APP_MEM 4096 - setprop ro.SECONDARY_SERVER_MEM 6144 - setprop ro.BACKUP_APP_MEM 6144 - setprop ro.HOME_APP_MEM 6144 - setprop ro.HIDDEN_APP_MEM 7168 - setprop ro.EMPTY_APP_MEM 8192 - -# Write value must be consistent with the above properties. -# Note that the driver only supports 6 slots, so we have combined some of -# the classes into the same memory level; the associated processes of higher -# classes will still be killed first. - write /sys/module/lowmemorykiller/parameters/adj 0,1,2,4,7,15 - - write /proc/sys/vm/overcommit_memory 1 - write /proc/sys/vm/min_free_order_shift 4 - write /sys/module/lowmemorykiller/parameters/minfree 2048,3072,4096,6144,7168,8192 - - # Set init its forked children's oom_adj. - write /proc/1/oom_adj -16 - - # Tweak background writeout - write /proc/sys/vm/dirty_expire_centisecs 200 - write /proc/sys/vm/dirty_background_ratio 5 - - # Permissions for System Server and daemons. - chown radio system /sys/android_power/state - chown radio system /sys/android_power/request_state - chown radio system /sys/android_power/acquire_full_wake_lock - chown radio system /sys/android_power/acquire_partial_wake_lock - chown radio system /sys/android_power/release_wake_lock - chown radio system /sys/power/state - chown radio system /sys/power/wake_lock - chown radio system /sys/power/wake_unlock - chmod 0660 /sys/power/state - chmod 0660 /sys/power/wake_lock - chmod 0660 /sys/power/wake_unlock - chown system system /sys/class/timed_output/vibrator/enable - chown system system /sys/class/leds/keyboard-backlight/brightness - chown system system /sys/class/leds/lcd-backlight/brightness - chown system system /sys/class/leds/button-backlight/brightness - chown system system /sys/class/leds/jogball-backlight/brightness - chown system system /sys/class/leds/red/brightness - chown system system /sys/class/leds/green/brightness - chown system system /sys/class/leds/blue/brightness - chown system system /sys/class/leds/red/device/grpfreq - chown system system /sys/class/leds/red/device/grppwm - chown system system /sys/class/leds/red/device/blink - chown system system /sys/class/leds/red/brightness - chown system system /sys/class/leds/green/brightness - chown system system /sys/class/leds/blue/brightness - chown system system /sys/class/leds/red/device/grpfreq - chown system system /sys/class/leds/red/device/grppwm - chown system system /sys/class/leds/red/device/blink - chown system system /sys/class/timed_output/vibrator/enable - chown system system /sys/module/sco/parameters/disable_esco - chown system system /sys/kernel/ipv4/tcp_wmem_min - chown system system /sys/kernel/ipv4/tcp_wmem_def - chown system system /sys/kernel/ipv4/tcp_wmem_max - chown system system /sys/kernel/ipv4/tcp_rmem_min - chown system system /sys/kernel/ipv4/tcp_rmem_def - chown system system /sys/kernel/ipv4/tcp_rmem_max - chown root radio /proc/cmdline - -# Define TCP buffer sizes for various networks -# ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax, - setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,110208 - setprop net.tcp.buffersize.wifi 4095,87380,110208,4096,16384,110208 - setprop net.tcp.buffersize.umts 4094,87380,110208,4096,16384,110208 - setprop net.tcp.buffersize.edge 4093,26280,35040,4096,16384,35040 - setprop net.tcp.buffersize.gprs 4092,8760,11680,4096,8760,11680 - - class_start default - -## Daemon processes to be run by init. -## -service ueventd /sbin/ueventd - critical - -service console /system/bin/sh - console - #disabled - #user shell - group log - -#on property:ro.secure=0 -# start console - -# adbd is controlled by the persist.service.adb.enable system property -service adbd /sbin/adbd - disabled - -# adbd on at boot in emulator -on property:ro.kernel.qemu=1 - start adbd - -on property:persist.service.adb.enable=1 - start adbd - -on property:persist.service.adb.enable=0 - stop adbd - -service servicemanager /system/bin/servicemanager - user system - critical - onrestart restart zygote - onrestart restart media - -service vold /system/bin/vold - socket vold stream 0660 root mount - ioprio be 2 - -service netd /system/bin/netd - socket netd stream 0660 root system - -service debuggerd /system/bin/debuggerd - -service ril-daemon /system/bin/rild - socket rild stream 660 root radio - socket rild-debug stream 660 radio system - user root - group radio cache inet misc audio sdcard_rw - -service zygote /system/bin/app_process -Xzygote /system/bin --zygote --start-system-server - socket zygote stream 666 - onrestart write /sys/android_power/request_state wake - onrestart write /sys/power/state on - onrestart restart media - onrestart restart netd - -service media /system/bin/mediaserver - user media - group system audio camera graphics inet net_bt net_bt_admin net_raw - ioprio rt 4 - -service bootanim /system/bin/bootanimation - user graphics - group graphics - disabled - oneshot - -service dbus /system/bin/dbus-daemon --system --nofork - socket dbus stream 660 bluetooth bluetooth - user bluetooth - group bluetooth net_bt_admin - -service bluetoothd /system/bin/bluetoothd -n - socket bluetooth stream 660 bluetooth bluetooth - socket dbus_bluetooth stream 660 bluetooth bluetooth - # init.rc does not yet support applying capabilities, so run as root and - # let bluetoothd drop uid to bluetooth with the right linux capabilities - group bluetooth net_bt_admin misc - disabled - -service hfag /system/bin/sdptool add --channel=10 HFAG - user bluetooth - group bluetooth net_bt_admin - disabled - oneshot - -service hsag /system/bin/sdptool add --channel=11 HSAG - user bluetooth - group bluetooth net_bt_admin - disabled - oneshot - -service opush /system/bin/sdptool add --channel=12 OPUSH - user bluetooth - group bluetooth net_bt_admin - disabled - oneshot - -service pbap /system/bin/sdptool add --channel=19 PBAP - user bluetooth - group bluetooth net_bt_admin - disabled - oneshot - -service installd /system/bin/installd - socket installd stream 600 system system - -service flash_recovery /system/etc/install-recovery.sh - oneshot - -service racoon /system/bin/racoon - socket racoon stream 600 system system - # racoon will setuid to vpn after getting necessary resources. - group net_admin - disabled - oneshot - -service mtpd /system/bin/mtpd - socket mtpd stream 600 system system - user vpn - group vpn net_admin net_raw - disabled - oneshot - -service keystore /system/bin/keystore /data/misc/keystore - user keystore - group keystore - socket keystore stream 666 - -service dumpstate /system/bin/dumpstate -s - socket dumpstate stream 0660 shell log - disabled - oneshot -- 1.7.1

14 years, 1 month

[PATCH 1/2 android/device/linaro/common] Add init.rc in common part of linaro devices

by Jeremy Chang

Signed-off-by: Jeremy Chang <jeremy.chang(a)linaro.org> --- init.rc | 410 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 410 insertions(+), 0 deletions(-) create mode 100644 init.rc diff --git a/init.rc b/init.rc new file mode 100644 index 0000000..b6a92c5 --- /dev/null +++ b/init.rc @@ -0,0 +1,410 @@ +on early-init + start ueventd + +on init + +sysclktz 0 + +loglevel 3 + +# setup the global environment + export PATH /sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin + export LD_LIBRARY_PATH /vendor/lib:/system/lib + export ANDROID_BOOTLOGO 1 + export ANDROID_ROOT /system + export ANDROID_ASSETS /system/app + export ANDROID_DATA /data + export EXTERNAL_STORAGE /mnt/sdcard + export ASEC_MOUNTPOINT /mnt/asec + export LOOP_MOUNTPOINT /mnt/obb + export BOOTCLASSPATH /system/framework/core.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/android.policy.jar:/system/framework/services.jar:/system/framework/core-junit.jar + +# Backward compatibility + symlink /system/etc /etc + symlink /sys/kernel/debug /d + +# Right now vendor lives on the same filesystem as system, +# but someday that may change. + symlink /system/vendor /vendor + +# create mountpoints + mkdir /mnt 0775 root system + mkdir /mnt/sdcard 0000 system system + +# Create cgroup mount point for cpu accounting + mkdir /acct + mount cgroup none /acct cpuacct + mkdir /acct/uid + +# Backwards Compat - XXX: Going away in G* + symlink /mnt/sdcard /sdcard + + mkdir /system + mkdir /data 0771 system system + mkdir /cache 0770 system cache + mkdir /config 0500 root root + + # Directory for putting things only root should see. + #mkdir /mnt/secure 0700 root root + + # Directory for staging bindmounts + #mkdir /mnt/secure/staging 0700 root root + + # Directory-target for where the secure container + # imagefile directory will be bind-mounted + #mkdir /mnt/secure/asec 0700 root root + + # Secure container public mount points. + #mkdir /mnt/asec 0700 root system + #mount tmpfs tmpfs /mnt/asec mode=0755,gid=1000 + + # Filesystem image public mount points. + #mkdir /mnt/obb 0700 root system + #mount tmpfs tmpfs /mnt/obb mode=0755,gid=1000 + + write /proc/sys/kernel/panic_on_oops 1 + write /proc/sys/kernel/hung_task_timeout_secs 0 + write /proc/cpu/alignment 4 + write /proc/sys/kernel/sched_latency_ns 10000000 + write /proc/sys/kernel/sched_wakeup_granularity_ns 2000000 + write /proc/sys/kernel/sched_compat_yield 1 + write /proc/sys/kernel/sched_child_runs_first 0 + +# Create cgroup mount points for process groups + mkdir /dev/cpuctl + mount cgroup none /dev/cpuctl cpu + chown system system /dev/cpuctl + chown system system /dev/cpuctl/tasks + chmod 0777 /dev/cpuctl/tasks + write /dev/cpuctl/cpu.shares 1024 + + mkdir /dev/cpuctl/fg_boost + chown system system /dev/cpuctl/fg_boost/tasks + chmod 0777 /dev/cpuctl/fg_boost/tasks + write /dev/cpuctl/fg_boost/cpu.shares 1024 + + mkdir /dev/cpuctl/bg_non_interactive + chown system system /dev/cpuctl/bg_non_interactive/tasks + chmod 0777 /dev/cpuctl/bg_non_interactive/tasks + # 5.0 % + write /dev/cpuctl/bg_non_interactive/cpu.shares 52 + +on fs +# mount mtd partitions + # Mount /system rw first to give the filesystem a chance to save a checkpoint + mount yaffs2 mtd@system /system + mount yaffs2 mtd@system /system ro remount + mount yaffs2 mtd@userdata /data nosuid nodev + mount yaffs2 mtd@cache /cache nosuid nodev + +on post-fs + # once everything is setup, no need to modify / + mount rootfs rootfs / rw remount + + # We chown/chmod /data again so because mount is run as root + defaults + chown system system /data + chmod 0771 /data + + # Create dump dir and collect dumps. + # Do this before we mount cache so eventually we can use cache for + # storing dumps on platforms which do not have a dedicated dump partition. + + mkdir /data/dontpanic + chown root log /data/dontpanic + chmod 0750 /data/dontpanic + + # Collect apanic data, free resources and re-arm trigger + copy /proc/apanic_console /data/dontpanic/apanic_console + chown root log /data/dontpanic/apanic_console + chmod 0640 /data/dontpanic/apanic_console + + copy /proc/apanic_threads /data/dontpanic/apanic_threads + chown root log /data/dontpanic/apanic_threads + chmod 0640 /data/dontpanic/apanic_threads + + write /proc/apanic_console 1 + + # Same reason as /data above + chown system cache /cache + chmod 0770 /cache + + # This may have been created by the recovery system with odd permissions + chown system cache /cache/recovery + chmod 0770 /cache/recovery + + #change permissions on vmallocinfo so we can grab it from bugreports + chown root log /proc/vmallocinfo + chmod 0440 /proc/vmallocinfo + + #change permissions on kmsg & sysrq-trigger so bugreports can grab kthread stacks + chown root system /proc/kmsg + chmod 0440 /proc/kmsg + chown root system /proc/sysrq-trigger + chmod 0220 /proc/sysrq-trigger + +# create basic filesystem structure + mkdir /data/misc 01771 system misc + mkdir /data/misc/bluetoothd 0770 bluetooth bluetooth + mkdir /data/misc/bluetooth 0770 system system + mkdir /data/misc/keystore 0700 keystore keystore + mkdir /data/misc/vpn 0770 system system + mkdir /data/misc/systemkeys 0700 system system + mkdir /data/misc/vpn/profiles 0770 system system + # give system access to wpa_supplicant.conf for backup and restore + mkdir /data/misc/wifi 0770 wifi wifi + chmod 0770 /data/misc/wifi + chmod 0660 /data/misc/wifi/wpa_supplicant.conf + mkdir /data/local 0771 shell shell + mkdir /data/local/tmp 0771 shell shell + mkdir /data/data 0771 system system + mkdir /data/app-private 0771 system system + mkdir /data/app 0771 system system + mkdir /data/property 0700 root root + + # create dalvik-cache and double-check the perms + mkdir /data/dalvik-cache 0771 system system + chown system system /data/dalvik-cache + chmod 0771 /data/dalvik-cache + + # create the lost+found directories, so as to enforce our permissions + mkdir /data/lost+found 0770 + mkdir /cache/lost+found 0770 + + # double check the perms, in case lost+found already exists, and set owner + chown root root /data/lost+found + chmod 0770 /data/lost+found + chown root root /cache/lost+found + chmod 0770 /cache/lost+found + +on boot +# basic network init + ifup lo + hostname localhost + domainname localdomain + +# set RLIMIT_NICE to allow priorities from 19 to -20 + setrlimit 13 40 40 + +# Define the oom_adj values for the classes of processes that can be +# killed by the kernel. These are used in ActivityManagerService. + setprop ro.FOREGROUND_APP_ADJ 0 + setprop ro.VISIBLE_APP_ADJ 1 + setprop ro.PERCEPTIBLE_APP_ADJ 2 + setprop ro.HEAVY_WEIGHT_APP_ADJ 3 + setprop ro.SECONDARY_SERVER_ADJ 4 + setprop ro.BACKUP_APP_ADJ 5 + setprop ro.HOME_APP_ADJ 6 + setprop ro.HIDDEN_APP_MIN_ADJ 7 + setprop ro.EMPTY_APP_ADJ 15 + +# Define the memory thresholds at which the above process classes will +# be killed. These numbers are in pages (4k). + setprop ro.FOREGROUND_APP_MEM 2048 + setprop ro.VISIBLE_APP_MEM 3072 + setprop ro.PERCEPTIBLE_APP_MEM 4096 + setprop ro.HEAVY_WEIGHT_APP_MEM 4096 + setprop ro.SECONDARY_SERVER_MEM 6144 + setprop ro.BACKUP_APP_MEM 6144 + setprop ro.HOME_APP_MEM 6144 + setprop ro.HIDDEN_APP_MEM 7168 + setprop ro.EMPTY_APP_MEM 8192 + +# Write value must be consistent with the above properties. +# Note that the driver only supports 6 slots, so we have combined some of +# the classes into the same memory level; the associated processes of higher +# classes will still be killed first. + write /sys/module/lowmemorykiller/parameters/adj 0,1,2,4,7,15 + + write /proc/sys/vm/overcommit_memory 1 + write /proc/sys/vm/min_free_order_shift 4 + write /sys/module/lowmemorykiller/parameters/minfree 2048,3072,4096,6144,7168,8192 + + # Set init its forked children's oom_adj. + write /proc/1/oom_adj -16 + + # Tweak background writeout + write /proc/sys/vm/dirty_expire_centisecs 200 + write /proc/sys/vm/dirty_background_ratio 5 + + # Permissions for System Server and daemons. + chown radio system /sys/android_power/state + chown radio system /sys/android_power/request_state + chown radio system /sys/android_power/acquire_full_wake_lock + chown radio system /sys/android_power/acquire_partial_wake_lock + chown radio system /sys/android_power/release_wake_lock + chown radio system /sys/power/state + chown radio system /sys/power/wake_lock + chown radio system /sys/power/wake_unlock + chmod 0660 /sys/power/state + chmod 0660 /sys/power/wake_lock + chmod 0660 /sys/power/wake_unlock + chown system system /sys/class/timed_output/vibrator/enable + chown system system /sys/class/leds/keyboard-backlight/brightness + chown system system /sys/class/leds/lcd-backlight/brightness + chown system system /sys/class/leds/button-backlight/brightness + chown system system /sys/class/leds/jogball-backlight/brightness + chown system system /sys/class/leds/red/brightness + chown system system /sys/class/leds/green/brightness + chown system system /sys/class/leds/blue/brightness + chown system system /sys/class/leds/red/device/grpfreq + chown system system /sys/class/leds/red/device/grppwm + chown system system /sys/class/leds/red/device/blink + chown system system /sys/class/leds/red/brightness + chown system system /sys/class/leds/green/brightness + chown system system /sys/class/leds/blue/brightness + chown system system /sys/class/leds/red/device/grpfreq + chown system system /sys/class/leds/red/device/grppwm + chown system system /sys/class/leds/red/device/blink + chown system system /sys/class/timed_output/vibrator/enable + chown system system /sys/module/sco/parameters/disable_esco + chown system system /sys/kernel/ipv4/tcp_wmem_min + chown system system /sys/kernel/ipv4/tcp_wmem_def + chown system system /sys/kernel/ipv4/tcp_wmem_max + chown system system /sys/kernel/ipv4/tcp_rmem_min + chown system system /sys/kernel/ipv4/tcp_rmem_def + chown system system /sys/kernel/ipv4/tcp_rmem_max + chown root radio /proc/cmdline + +# Define TCP buffer sizes for various networks +# ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax, + setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,110208 + setprop net.tcp.buffersize.wifi 4095,87380,110208,4096,16384,110208 + setprop net.tcp.buffersize.umts 4094,87380,110208,4096,16384,110208 + setprop net.tcp.buffersize.edge 4093,26280,35040,4096,16384,35040 + setprop net.tcp.buffersize.gprs 4092,8760,11680,4096,8760,11680 + + class_start default + +## Daemon processes to be run by init. +## +service ueventd /sbin/ueventd + critical + +service console /system/bin/sh + console + #disabled + #user shell + group log + +#on property:ro.secure=0 +# start console + +# adbd is controlled by the persist.service.adb.enable system property +service adbd /sbin/adbd + disabled + +# adbd on at boot in emulator +on property:ro.kernel.qemu=1 + start adbd + +on property:persist.service.adb.enable=1 + start adbd + +on property:persist.service.adb.enable=0 + stop adbd + +service servicemanager /system/bin/servicemanager + user system + critical + onrestart restart zygote + onrestart restart media + +service vold /system/bin/vold + socket vold stream 0660 root mount + ioprio be 2 + +service netd /system/bin/netd + socket netd stream 0660 root system + +service debuggerd /system/bin/debuggerd + +service ril-daemon /system/bin/rild + socket rild stream 660 root radio + socket rild-debug stream 660 radio system + user root + group radio cache inet misc audio sdcard_rw + +service zygote /system/bin/app_process -Xzygote /system/bin --zygote --start-system-server + socket zygote stream 666 + onrestart write /sys/android_power/request_state wake + onrestart write /sys/power/state on + onrestart restart media + onrestart restart netd + +service media /system/bin/mediaserver + user media + group system audio camera graphics inet net_bt net_bt_admin net_raw + ioprio rt 4 + +service bootanim /system/bin/bootanimation + user graphics + group graphics + disabled + oneshot + +service dbus /system/bin/dbus-daemon --system --nofork + socket dbus stream 660 bluetooth bluetooth + user bluetooth + group bluetooth net_bt_admin + +service bluetoothd /system/bin/bluetoothd -n + socket bluetooth stream 660 bluetooth bluetooth + socket dbus_bluetooth stream 660 bluetooth bluetooth + # init.rc does not yet support applying capabilities, so run as root and + # let bluetoothd drop uid to bluetooth with the right linux capabilities + group bluetooth net_bt_admin misc + disabled + +service hfag /system/bin/sdptool add --channel=10 HFAG + user bluetooth + group bluetooth net_bt_admin + disabled + oneshot + +service hsag /system/bin/sdptool add --channel=11 HSAG + user bluetooth + group bluetooth net_bt_admin + disabled + oneshot + +service opush /system/bin/sdptool add --channel=12 OPUSH + user bluetooth + group bluetooth net_bt_admin + disabled + oneshot + +service pbap /system/bin/sdptool add --channel=19 PBAP + user bluetooth + group bluetooth net_bt_admin + disabled + oneshot + +service installd /system/bin/installd + socket installd stream 600 system system + +service flash_recovery /system/etc/install-recovery.sh + oneshot + +service racoon /system/bin/racoon + socket racoon stream 600 system system + # racoon will setuid to vpn after getting necessary resources. + group net_admin + disabled + oneshot + +service mtpd /system/bin/mtpd + socket mtpd stream 600 system system + user vpn + group vpn net_admin net_raw + disabled + oneshot + +service keystore /system/bin/keystore /data/misc/keystore + user keystore + group keystore + socket keystore stream 666 + +service dumpstate /system/bin/dumpstate -s + socket dumpstate stream 0660 shell log + disabled + oneshot -- 1.7.1

14 years, 1 month

← Newer
1
...
8
9
10
11
12
13
14
...
18
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev March 2011