linaro-dev August 2010

linaro-dev@lists.linaro.org

62 participants
82 discussions

by John Rigby

The following changes since commit 7a949698c262fab1f0ecac8adf3ceb7eaafa8c8c: John Rigby (1): LINARO: Linaro-2.6.35-1004.8 are available in the git repository at: git://git.linaro.org/ubuntu/linux-linaro.git linaro John Rigby (2): LINARO: Start new release LINARO: Linaro-2.6.35-1004.9 Mike Rapoport (1): OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings Robert Nelson (3): ARM: OMAP: Beagle: revision detection ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect ARM: OMAP: Beagle: no gpio_wp pin connection on xM arch/arm/mach-omap2/board-omap3beagle.c | 93 +++++- arch/arm/plat-omap/include/plat/vram.h | 1 + debian.linaro/abi/2.6.35-1003.7/abiname | 1 - debian.linaro/abi/2.6.35-1004.8/abiname | 1 + .../armel/linaro-mx51 | 169 +++++----- .../armel/linaro-mx51.modules | 0 .../armel/linaro-omap | 369 ++++++++++---------- .../armel/linaro-omap.modules | 6 + .../armel/linaro-vexpress | 3 + .../armel/linaro-vexpress.modules | 0 debian.linaro/changelog | 15 + drivers/video/omap2/omapfb/omapfb-main.c | 2 +- drivers/video/omap2/vram.c | 10 + 13 files changed, 406 insertions(+), 264 deletions(-) delete mode 100644 debian.linaro/abi/2.6.35-1003.7/abiname create mode 100644 debian.linaro/abi/2.6.35-1004.8/abiname rename debian.linaro/abi/{2.6.35-1003.7 => 2.6.35-1004.8}/armel/linaro-mx51 (98%) rename debian.linaro/abi/{2.6.35-1003.7 => 2.6.35-1004.8}/armel/linaro-mx51.modules (100%) rename debian.linaro/abi/{2.6.35-1003.7 => 2.6.35-1004.8}/armel/linaro-omap (97%) rename debian.linaro/abi/{2.6.35-1003.7 => 2.6.35-1004.8}/armel/linaro-omap.modules (99%) rename debian.linaro/abi/{2.6.35-1003.7 => 2.6.35-1004.8}/armel/linaro-vexpress (99%) rename debian.linaro/abi/{2.6.35-1003.7 => 2.6.35-1004.8}/armel/linaro-vexpress.modules (100%)

14 years, 10 months

How to involve into the linaro development

by nvhariharan＠gmail.com

Hi All, I am having experience in Omap, imx based linux platforms. How shall I involve myself into the linaro development, I am into this maillist and using the linaro distribution into beagle board, since all the participants are having linaro mail ids, Kindly advise me and use me as a resource for this development. Thanks, Hariharan Veerappan Software Architect, EmbDes Technologies, Bangalore, India. Sent from BlackBerry® on Airtel

14 years, 10 months

linux-meta-linaro pull request

by John Rigby

The following changes since commit 09b46239478bd267afcc398dceff7782f686af82: John Rigby (1): LINARO: Linaro-2.6.35.1003.8 are available in the git repository at: git://git.linaro.org/ubuntu/linux-meta-linaro.git master John Rigby (1): LINARO: Linaro-2.6.35-1004.9 meta-source/debian/changelog | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)

14 years, 10 months

Beta Freeze in effect, Beta around the corner

by Jamie Bennett

Hi, Beta Freeze [1] is now in effect. All uploads to the main archive must be approved by a member of the release team so if changes are needed, please get them in as soon as possible. Uploads to other archives do not need to be acknowledged by the release team and can continue to be pushed, with an eye to quality and bug fixing, as normal. Once the Beta milestone [2] has been reached Feature Freeze [3] comes back into effect. We are now less than one week away from Beta Release. Please take the time between now and then to test the images as much as possible to ensure that this release is as polished and stable as possible. A Beta release candidate image will be selected soon following the documented steps [4] and the release will be made next Thursday. Regards, Jamie. -- Linaro Release Manager [1] http://wiki.linaro.org/Releases/BetaFreeze [2] http://wiki.linaro.org/Releases/BetaRelease [3] http://wiki.linaro.org/Releases/FeatureFreeze [4] http://wiki.linaro.org/Releases/MakeARelease

14 years, 10 months

PowerTOP kernel patch

by Yong Shen

Hi there, Power management WG is invistigating on a tool named PowerTOP, which can spit out real time data on various aspects of a running system, in terms of power related information. However, occasionally some PowerTOP features need kernel patch. We'd like users to be able to use these latest features without having to wait up to 3 months for Linus to make a release with the kernel portion -- as the original patch developer(s) said. There are totally 3 patches which I had already enclosed them in the attachment. Except vfs.patch, the rest two are original and can be applied on linaro kernel without any changes. vfs.patch is changed a little from original one to adapt current linaro kernel. Hope John would give it a thought to merge these patch in Linaro kernel. Yong

14 years, 10 months

[PATCH] OMAP CPUIDLE: CPU Idle latency measurement

by vishwanath.sripathy＠linaro.org

From: Vishwanath BS <vishwanath.sripathy(a)linaro.org> This patch has instrumentation code for measuring latencies for various CPUIdle C states for OMAP. Idea here is to capture the timestamp at various phases of CPU Idle and then compute the sw latency for various c states. For OMAP, 32k clock is chosen as reference clock this as is an always on clock. wkup domain memory (scratchpad memory) is used for storing timestamps. One can see the worstcase latencies in below sysfs entries (after enabling CONFIG_CPU_IDLE_PROF in .config). This information can be used to correctly configure cpu idle latencies for various C states after adding HW latencies for each of these sw latencies. /sys/devices/system/cpu/cpu0/cpuidle/state<n>/actual_latency /sys/devices/system/cpu/cpu0/cpuidle/state<n>/sleep_latency /sys/devices/system/cpu/cpu0/cpuidle/state<n>/wkup_latency THis patch is tested on OMAP ZOOM3 using kevin's pm branch. Signed-off-by: Vishwanath BS <vishwanath.sripathy(a)linaro.org> --- arch/arm/mach-omap2/cpuidle34xx.c | 53 +++++++++++++++- arch/arm/mach-omap2/pm.h | 5 ++ arch/arm/mach-omap2/sleep34xx.S | 121 +++++++++++++++++++++++++++++++++++++ drivers/cpuidle/Kconfig | 5 ++ drivers/cpuidle/sysfs.c | 16 +++++- include/linux/cpuidle.h | 3 + 6 files changed, 198 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 3d3d035..b10bc4e --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -25,6 +25,7 @@ #include <linux/sched.h> #include <linux/cpuidle.h> +#include <linux/clk.h> #include <plat/prcm.h> #include <plat/irqs.h> #include <plat/powerdomain.h> @@ -86,6 +87,11 @@ static struct cpuidle_params cpuidle_params_table[] = { {1, 10000, 30000, 300000}, }; +#ifdef CONFIG_CPU_IDLE_PROF +static struct clk *clk_32k; +#define CONVERT_32K_USEC(lat) (lat * (USEC_PER_SEC/clk_get_rate(clk_32k))) +#endif + static int omap3_idle_bm_check(void) { if (!omap3_can_sleep()) @@ -115,21 +121,26 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, * Called from the CPUidle framework to program the device to the * specified target state selected by the governor. */ + static int omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_state *state) { struct omap3_processor_cx *cx = cpuidle_get_statedata(state); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; + int idle_time, latency; + long sleep_time, wkup_time, total_sleep_time; + long preidle_time, postidle_time; current_cx_state = *cx; - /* Used to keep track of the total time in idle */ - getnstimeofday(&ts_preidle); - local_irq_disable(); local_fiq_disable(); - + /* Used to keep track of the total time in idle */ + getnstimeofday(&ts_preidle); +#ifdef CONFIG_CPU_IDLE_PROF + preidle_time = omap3_sram_get_32k_tick(); +#endif pwrdm_set_next_pwrst(mpu_pd, mpu_state); pwrdm_set_next_pwrst(core_pd, core_state); @@ -153,9 +164,39 @@ return_sleep_time: getnstimeofday(&ts_postidle); ts_idle = timespec_sub(ts_postidle, ts_preidle); +#ifdef CONFIG_CPU_IDLE_PROF + postidle_time = omap3_sram_get_32k_tick(); +#endif local_irq_enable(); local_fiq_enable(); +#ifdef CONFIG_CPU_IDLE_PROF + sleep_time = omap3_sram_get_sleep_time(); + wkup_time = omap3_sram_get_wkup_time(); + + /* take care of overflow */ + if (postidle_time < preidle_time) + postidle_time += (u32) 0xffffffff; + if (wkup_time < sleep_time) + wkup_time += (u32) 0xffffffff; + + idle_time = postidle_time - preidle_time; + total_sleep_time = wkup_time - sleep_time; + latency = idle_time - total_sleep_time; + sleep_time = omap3_sram_get_sleep_time(); + wkup_time = omap3_sram_get_wkup_time(); + + /* calculate average latency after ignoring sprious ones */ + if ((total_sleep_time > 0) && (latency > state->actual_latency) + && (latency >= 0)) { + state->actual_latency = CONVERT_32K_USEC(latency); + latency = (sleep_time - preidle_time); + state->sleep_latency = CONVERT_32K_USEC(latency); + latency = postidle_time - wkup_time; + state->wkup_latency = CONVERT_32K_USEC(latency); + } +#endif + return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC; } @@ -419,6 +460,7 @@ struct cpuidle_driver omap3_idle_driver = { */ int __init omap3_idle_init(void) { + static struct device dummy_device; int i, count = 0; struct omap3_processor_cx *cx; struct cpuidle_state *state; @@ -456,6 +498,9 @@ int __init omap3_idle_init(void) omap3_cpuidle_update_states(); +#ifdef CONFIG_CPU_IDLE_PROF + clk_32k = clk_get(&dummy_device, "wkup_32k_fck"); +#endif if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", __func__); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 3de6ece..e62e87d 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -82,4 +82,9 @@ extern unsigned int save_secure_ram_context_sz; extern unsigned int omap24xx_cpu_suspend_sz; extern unsigned int omap34xx_cpu_suspend_sz; +#ifdef CONFIG_CPU_IDLE_PROF +extern u32 omap3_sram_get_wkup_time(); +extern u32 omap3_sram_get_sleep_time(); +extern u32 omap3_sram_get_32k_tick(); +#endif #endif diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index ba53191..56fd9da 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -59,6 +59,20 @@ #define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) #define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) +#define TIMER_32K_SYNC_P 0x48320010 +#define TIMER_32K_SYNC OMAP2_L4_IO_ADDRESS(TIMER_32K_SYNC_P) + +#define SCRATCHPAD_SLEEP_TIME_OFFSET 0x9f8 +#define SCRATCHPAD_WKUP_TIME_OFFSET 0x9fc +#define SCRATCHPAD_SLEEP_TIME OMAP343X_CTRL_REGADDR(SCRATCHPAD_SLEEP_TIME_OFFSET) +#define SCRATCHPAD_WKUP_TIME OMAP343X_CTRL_REGADDR(SCRATCHPAD_WKUP_TIME_OFFSET) +#define SCRATCHPAD_WKUP_TIME_P OMAP343X_CTRL_BASE + SCRATCHPAD_WKUP_TIME_OFFSET + +#define CM_ICLKEN_WKUP OMAP34XX_CM_REGADDR(WKUP_MOD, CM_ICLKEN) +#define CM_ICLKEN_WKUP_P OMAP3430_CM_BASE + WKUP_MOD + CM_ICLKEN +#define CM_IDLEST_WKUP OMAP34XX_CM_REGADDR(WKUP_MOD, CM_IDLEST) +#define CM_IDLEST_WKUP_P OMAP3430_CM_BASE + WKUP_MOD + CM_IDLEST + .text /* Function to acquire the semaphore in scratchpad */ ENTRY(lock_scratchpad_sem) @@ -183,7 +197,31 @@ api_params: .word 0x4, 0x0, 0x0, 0x1, 0x1 ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context +#ifdef CONFIG_CPU_IDLE_PROF +ENTRY(omap3_sram_get_wkup_time) + stmfd sp!, {lr} @ save registers on stack + ldr r0, wkup_time + ldr r0, [r0] + ldmfd sp!, {pc} @ restore regs and return +ENTRY(omap3_sram_get_wkup_time_sz) + .word . - omap3_sram_get_wkup_time + +ENTRY(omap3_sram_get_sleep_time) + stmfd sp!, {lr} @ save registers on stack + ldr r0, sleep_time + ldr r0, [r0] + ldmfd sp!, {pc} @ restore regs and return +ENTRY(omap3_sram_get_sleep_time_sz) + .word . - omap3_sram_get_sleep_time +ENTRY(omap3_sram_get_32k_tick) + stmfd sp!, {lr} @ save registers on stack + ldr r0, sync_32k_timer + ldr r0, [r0] + ldmfd sp!, {pc} @ restore regs and return +ENTRY(omap3_sram_get_32k_tick_sz) + .word . - omap3_sram_get_32k_tick +#endif /* * Forces OMAP into idle state * @@ -207,6 +245,13 @@ loop: cmp r1, #0x0 /* If context save is required, do that and execute wfi */ bne save_context_wfi + +#ifdef CONFIG_CPU_IDLE_PROF + ldr r4, sync_32k_timer + ldr r5, [r4] + ldr r6, sleep_time + str r5, [r6] +#endif /* Data memory barrier and Data sync barrier */ mov r1, #0 mcr p15, 0, r1, c7, c10, 4 @@ -224,8 +269,25 @@ loop: nop nop nop +#ifdef CONFIG_CPU_IDLE_PROF + ldr r4, iclken_wkup + ldr r5, [r4] + orr r5, r5, #0x4 + str r5, [r4] + ldr r4, idlest_wkup +wait_idlest: + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x0 + bne wait_idlest + ldr r4, sync_32k_timer + ldr r5, [r4] + ldr r6, wkup_time + str r5, [r6] +#endif bl wait_sdrc_ok + ldmfd sp!, {r0-r12, pc} @ restore regs and return restore_es3: /*b restore_es3*/ @ Enable to debug restore code @@ -247,6 +309,23 @@ copy_to_sram: blx r1 restore: /* b restore*/ @ Enable to debug restore code +#ifdef CONFIG_CPU_IDLE_PROF + ldr r4, iclken_wkup_p + ldr r5, [r4] + orr r5, r5, #0x4 + str r5, [r4] + ldr r4, idlest_wkup_p +wait_idlest1: + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x0 + bne wait_idlest1 + ldr r4, sync_32k_timer_p + ldr r5, [r4] + ldr r6, wkup_time_p + str r5, [r6] +#endif + /* Check what was the reason for mpu reset and store the reason in r9*/ /* 1 - Only L1 and logic lost */ /* 2 - Only L2 lost - In this case, we wont be here */ @@ -587,6 +666,12 @@ finished: mcr p15, 2, r10, c0, c0, 0 isb skip_l2_inval: +#ifdef CONFIG_CPU_IDLE_PROF + ldr r4, sync_32k_timer + ldr r5, [r4] + ldr r6, sleep_time + str r5, [r6] +#endif /* Data memory barrier and Data sync barrier */ mov r1, #0 mcr p15, 0, r1, c7, c10, 4 @@ -603,6 +688,22 @@ skip_l2_inval: nop nop nop +#ifdef CONFIG_CPU_IDLE_PROF + ldr r4, iclken_wkup + ldr r5, [r4] + orr r5, r5, #0x4 + str r5, [r4] + ldr r4, idlest_wkup +wait_idlest2: + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x0 + bne wait_idlest2 + ldr r4, sync_32k_timer + ldr r5, [r4] + ldr r6, wkup_time + str r5, [r6] +#endif bl wait_sdrc_ok /* restore regs and return */ ldmfd sp!, {r0-r12, pc} @@ -668,5 +769,25 @@ cache_pred_disable_mask: .word 0xFFFFE7FB control_stat: .word CONTROL_STAT +#ifdef CONFIG_CPU_IDLE_PROF +sync_32k_timer: + .word TIMER_32K_SYNC +sync_32k_timer_p: + .word TIMER_32K_SYNC_P +sleep_time: + .word SCRATCHPAD_SLEEP_TIME +wkup_time: + .word SCRATCHPAD_WKUP_TIME +wkup_time_p: + .word SCRATCHPAD_WKUP_TIME_P +iclken_wkup: + .word CM_ICLKEN_WKUP +iclken_wkup_p: + .word CM_ICLKEN_WKUP_P +idlest_wkup: + .word CM_IDLEST_WKUP +idlest_wkup_p: + .word CM_IDLEST_WKUP_P +#endif ENTRY(omap34xx_cpu_suspend_sz) .word . - omap34xx_cpu_suspend diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index 7dbc4a8..147456d 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -18,3 +18,8 @@ config CPU_IDLE_GOV_MENU bool depends on CPU_IDLE && NO_HZ default y + +config CPU_IDLE_PROF + bool + depends on CPU_IDLE + default n diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 0310ffa..a3e9db1 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -249,6 +249,11 @@ define_show_state_ull_function(usage) define_show_state_ull_function(time) define_show_state_str_function(name) define_show_state_str_function(desc) +#ifdef CONFIG_CPU_IDLE_PROF +define_show_state_function(actual_latency) +define_show_state_function(sleep_latency) +define_show_state_function(wkup_latency) +#endif define_one_state_ro(name, show_state_name); define_one_state_ro(desc, show_state_desc); @@ -256,7 +261,11 @@ define_one_state_ro(latency, show_state_exit_latency); define_one_state_ro(power, show_state_power_usage); define_one_state_ro(usage, show_state_usage); define_one_state_ro(time, show_state_time); - +#ifdef CONFIG_CPU_IDLE_PROF +define_one_state_ro(actual_latency, show_state_actual_latency); +define_one_state_ro(sleep_latency, show_state_sleep_latency); +define_one_state_ro(wkup_latency, show_state_wkup_latency); +#endif static struct attribute *cpuidle_state_default_attrs[] = { &attr_name.attr, &attr_desc.attr, @@ -264,6 +273,11 @@ static struct attribute *cpuidle_state_default_attrs[] = { &attr_power.attr, &attr_usage.attr, &attr_time.attr, +#ifdef CONFIG_CPU_IDLE_PROF + &attr_actual_latency.attr, + &attr_sleep_latency.attr, + &attr_wkup_latency.attr, +#endif NULL }; diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 36ca972..4539474 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -43,6 +43,9 @@ struct cpuidle_state { int (*enter) (struct cpuidle_device *dev, struct cpuidle_state *state); +#ifdef CONFIG_CPU_IDLE_PROF + u32 actual_latency, sleep_latency, wkup_latency; +#endif }; /* Idle State Flags */ -- 1.7.0.4

14 years, 10 months

linux-linaro pull request

by John Rigby

Tim, Here is the latest just before the freeze. I started with the Ubuntu-2.6.35-19.25 merged linux-linaro-2.6.35 then rebased my previous linaro packaging patches on top of the result. The following changes since commit 978e830c47ca5de5824ddf3ba9f7d3571da765a7: Leann Ogasawara (1): UBUNTU: Ubuntu-2.6.35-19.25 are available in the git repository at: git://git.linaro.org/ubuntu/linux-linaro.git linaro Amit Kucheria (2): arm: mxc: utilise usecount field in clock operations mxc: Fix pad names for imx51 Anand Gadiyar (3): OMAP3: wait on IDLEST after enabling USBTLL fclk OMAP3630: Add ES1.1 and ES1.2 detection omap: 3630: disable TLL SAR on 3630 ES1 Anton Vorontsov (4): ARM: cns3xxx: Use IO memory accessors everywhere ARM: cns3xxx: Add support for PCI Express ports ARM: cns3xxx: Add support for SDHCI controllers ARM: cns3xxx: Add support for AHCI controllers Arnaud Patard (1): [ARM] qnap tsx1x: fix section mismatch Artem Bityutskiy (1): omap: device: improve errors handling Baruch Siach (13): mxc_nand: add support for platform defined partitions mx25: add platform code for imx-keypad mx25pdk: add keypad support mx25: add watchdog clock mx25pdk: register watchdog device mx25: add a comment documenting undocumented IPG clocks mx27: add support for the CSI device mx25: add support for the CSI device mx25: add iomux defines for UART4 on KPP pins mx25: add PWM4 to iomux arm/imx/gpio: add spinlock protection mx2_camera: Add soc_camera support for i.MX25/i.MX27 mx2_camera: fix type of dma buffer virtual address pointer Benjamin Herrenschmidt (3): net/phy/marvell: Expose IDs and flags in a .h and add dns323 LEDs setup flag [ARM] orion5x: Base support for DNS-323 rev C1 [ARM] orion5x: Fix soft-reset for some platforms Benjamin Zores (1): [ARM] Kirkwood: update MPP definition. Benoit Cousson (1): OMAP2&3: hwmod: Remove _hwmod prefix in name string Catalin Marinas (17): ARM: Correct the cpu_architecture() function for ARMv7 smsc911x: Add spinlocks around registers access kmemleak: Show more information for objects found by alias kmemleak: Add DocBook style comments to kmemleak.c kbuild: Warn on selecting symbols with unmet direct dependencies ARM: Mark CPU_32v6K as depended on CPU_V7 ARM: Add support for the MOVW/MOVT relocations in Thumb-2 ARM: Remove dummy loads from the original relocation address ARM: Do not compile the Thumb-2 module relocations on an ARM kernel ARM: Allow lazy cache flushing via PG_arch_1 for highmem pages ARM: Assume new page cache pages have dirty D-cache ARM: Introduce __sync_icache_dcache() for VIPT caches ARM: Use lazy cache flushing on ARMv7 SMP systems ARM: Remove superfluous flush_kernel_dcache_page() ARM: Implement phys_mem_access_prot() to avoid attributes aliasing ARM: Improve the L2 cache performance when PL310 is used ARM: Remove the domain switching on ARMv6k/v7 CPUs Chris Wilson (1): lib/scatterlist: Hook sg_kmalloc into kmemleak (v2) Christoph Egger (8): Replace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS Removing dead OMAP_IR Removing dead OMAP_DSP Removing dead OMAP_STI Replacing LEDS_OMAP_DEBUG with OMAP_DEBUG_LEDS Removing dead APM Removing dead MACH_OMAP_H4_OTG Removing dead MACH_OMAP2_H4_USB1 Cory Maccarrone (1): omap1: omap7xx clocks, mux, serial fixes Daniel Mack (2): ARM: mx3: pcm037: remove unused variable ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pin Dave Martin (9): perf report: Don't abbreviate file paths relative to the cwd perf tools: Remove unneeded code for tracking the cwd in perf sessions perf tools: Factor out buildid reading and make it implicit in dso__load perf tools: remove extra build-id check factored into dso__load perf symbols: Improve debug image search when loading symbols perf events: Fix mmap offset determination perf symbols: work around incorrect ET_EXEC symbol adjustment perf symbols: Ignore mapping symbols on ARM perf symbols: fix symbol offset breakage with separated debug David Anders (1): omap4: Add OMAP4 Panda Support Deepak K (1): omap2/3/4: serial: errata i202: fix for MDR1 access Dinh Nguyen (2): mx5: Add i2c to Freescale MX51 Babbage HW mx5: Register i2c on Freescale MX51 Babbage HW Dmitry Eremin-Solenikov (2): ARM: 6162/1: at91sam9g20ek: add fixed-value regulator for wm8731 ARM: 6163/1: at91sam9g20ek: add fixed-value regulator for wm8731 Dmytro Milinevskyy (1): [ARM] Marvell OpenRD-Ultimate machine support Eric Bénard (35): eukrea_mbimx27-baseboard: fix typo in display name eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls eukrea_mbimx27-baseboard: add timings for DVI output cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage mach-cpuimx27: fix QuadUART's IRQ typo in pins'setup eukrea_mbimx27: fix ADS7846 support mach-cpuimx27: add USB Host2 and OTG support mach-cpuimx27: register wdt and w1_master resources mxcmmc: add card detect through DAT3 possibility eukrea_mbimx27: use card detect through DAT3 for SDHC1 MX2X: Add Keypad device definition for MX2X arch eukrea_mbimx27: add support for the keyboard eukrea_mbimx27: add audio codec i.MX35: return IPU clock's value for mx3fb mach-cpuimx27: fix USB_ULPI build warnings eukrea_mbimx27: fix audio support when SOC is compiled as module i.MX27: add suspend to RAM support MX25: put define for OTG base address in right include plat-mxc/ehci.c: add i.MX25 support i.MX25: fix get_rate_otg to return the correct value i.MX25: fix EHCI support i.MX25: fix USB gadget support i.MX25: add AUDMUX and SSI support i.MX25: add cpuimx25 module and its baseboard i.MX35: add cpuimx35 support and its baseboard mxcmmc: convert to pm_ops and enable/disable clock imx25: fix low level debug imxfb: add pwmr controlled backlight support eukrea_mbimx27-baseboard: fix compile when CONFIG_SPI_IMX is disabled i.MX51: handle IRQ for gpio 16..31 iomux-mx51: add 4 pin definitions mbimxsd baseboards : remove unnecessary include Fix KConfig warning eukrea-baseboards: merge includes in one file i.MX51: add support for cpuimx51 module and its baseboard Eric Miao (2): ARM: Remove unused PARAMS_PHYS from arch/arm/boot/compressed ARM: Auto calculate ZRELADDR and provide option for exceptions Fabio Estevam (1): mx31_3ds: Handle USB OTG GPIO Errors Felipe Contreras (13): omap: mailbox: trivial cleanups omap: mailbox: reorganize structures omap: mailbox: 2420 should be detected at run-time omap: mailbox: use correct config for omap1 omap: mailbox: update omap1 probing omap: mailbox: don't export unecessary symbols omap: mailbox: remove unecessary fields omap: mailbox: add IRQ names omap: mailbox: reorganize registering omap: mailbox: simplify omap_mbox_register() omap: mailbox: only compile for configured archs omap: mailbox: standarize on 'omap-mailbox' omap: mailbox: reorganize headers Fernando Guzman Lugo (4): Mailbox: free mailbox interrupt before freeing blk queue Mailbox: flush pending deferred works before freeing blk queue Mailbox: Check valid registered callback before calling Mailbox: disable mailbox interrupt when request queue Govindraj R (1): omap3: serial: Add context save and restore for mcr Grazvydas Ignotas (3): omap3: pandora: update gpio-keys data omap3: pandora: add NAND and wifi support omap: mux: fix multipath gpio handling Harro Haan (1): ARM: 5967/1: at91_udc.c use spinlocks instead of local_irq_xxx Hartley Sweeten (3): ARM: 6167/1: ep93xx: register backlight driver ARM: 6168/1: ep93xx: move physmap flash registration into core.c ARM: 6174/1: ep93xx: clear devcfg bits before setting them Helge Deller (1): PARISC: led.c - fix potential stack overflow in led_proc_write() Hemanth V (1): OMAP4: Add GPIO LED support for SDP board Hiroshi DOYU (6): omap iommu: Introduce iopgd_is_table MACRO omap iommu: Rename iopte_[p,v]addr -> iopte_page_[p,v]addr omap iommu: move iommu_disable at fault to the above layer omap iommu: Make omap-iommu.o built-in Mailbox: new mutext lock for h/w mailbox configuration omap mailbox: Set a device in logical mbox instance for traceability Jarkko Nikula (4): omap: rx51: Set regulator V28 always on omap: rx51: Add platform_data for tlv320aic3x with reset gpionumber omap: rx51: Use REGULATOR_SUPPLY macro when initializingregulator consumers omap: rx51: Add supply and data for the tpa6130a2 headphoneamplifier Jason Baron (1): kmemleak: Introduce a default off mode for kmemleak Jason Wang (10): mx51/iomux: Fix mux mode and input path for two pads mx51/iomux: add UART and GPIO pad definitions for imx51_3ds board mxc/iomux: add GPIO bank offset for iomux v3 platforms mxc: add common debug board for 3-stack platforms mx31_3ds: revert 3ds debug board relate code mx51_3ds: Add support for the imx51 3-stack board mx51: add imx_keypad device definition for mx51 platforms mx51_3ds: add keypad support on 3ds platform imx: move gpio init after to irq init omap: Fix DEBUG_LL uart to access phys addr when MMU isn't enable John Rigby (17): Merge linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 LINARO: Add debian.linaro packaging LINARO: select debian.linaro packaging LINARO: [Config] Update configs for new upstream omap3 nand: fix missing gpmc_prefetch_reset param LINARO: Start new release LINARO: Linaro-2.6.35-1001-5 LINARO: [Config] Fix vexpress config LINARO: [Config] Add mx51 flavour LINARO: Start new release LINARO: [config] Update vexpress config LINARO: Linaro-2.6.35-1003.7 LINARO: Start new release LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 merge LINARO: [Config] Update configs LINARO: Bump ABI LINARO: Linaro-2.6.35-1004.8 Kan-Ru Chen (5): OMAP2: Devkit8000: Enable DVI-D output OMAP2: Devkit8000: Setup LCD reset omap: Add new interface omap_get_die_id omap: Use omap_get_die_id() to get the DIE ids omap: Devkit8000: Use DIE id to initialize dm9000 MAC address Kanigeri, Hari (3): omap iommu: update irq mask to be specific about twl and tlb omap iommu: add functionality to get TLB miss interrupt omap iommu: update ducati mmu irq define name Kevin Hilman (8): OMAP24xx: CM: fix mask used for checking IDLEST status OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST OMAP: hwmod: add non-locking versions of enable and idle functions OMAP: omap_device: ensure hwmod tracks attached omap_device pointer OMAP: PM: create omap_devices for MPU, DSP, L3 OMAP: hwmod data: add class for IVA hwmods OMAP2&3: hwmod: Replace l3 -> l3_main OMAP3: hwmod data: add data for OMAP3 IVA2 Kevin Wells (11): ARM: LPC32XX: Initial arch header files ARM: LPC32XX: Debug and IRQ macros ARM: LPC32XX: Clock driver ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: System suspend support ARM: LPC32XX: Serial support code ARM: LPC32XX: Misc support functions ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Arch config menu supoport and makefiles ARM: Add support for the LPC32XX arch Merge branch 'test' of ../test/linux-2.6-lpc2 into wells/lpc32xx-arch_v2 Kirill A. Shutemov (5): ARM: 6252/1: Use SIGBUS for unaligned access instead of SIGILL ARM: 6269/1: Add 'code' parameter for hook_fault_code() ARM: 6255/1: Workaround infinity loop in handling of translation faults ARM: 6256/1: Check arch version and modify fsr_info[] depends on it at runtime ARM: 6268/1: ARMv6K and ARMv7 use fault statuses 3 and 6 as Access Flag fault Leif Lindholm (1): ARM: Add SWP/SWPB emulation for ARMv7 processors (v5) Linus Torvalds (1): Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm Linus Walleij (17): ARM: 6153/1: nomadik MTU to use dynamic shift and mult assignment ARM: 6204/1: Fixups for the RealView PB1176 ARM: 6227/1: PL022 SSP platform data for the RealViews ARM: 6228/1: PL022 SSP platform data for the Versatile ARM: 6222/1: add memory types for the TCMs ARM: 6223/1: support multiple TCM banks ARM: 6224/1: print TCM whereabouts in init message ARM: 6215/2: add character LCD platform data for RealView and Versatile ARM: 6234/1: move SPEAr to use common mult/shift calculation code ARM: 6159/1: Move IOP to use common mult/shift calculation code ARM: 6214/2: driver for the character LCD found in ARM refdesigns ARM: 6235/2: driver for the LEDs found in the later ARM refdesigns ARM: 6264/1: fix Versatile Express LED oversight ARM: 6225/1: make TCM allocation static and common for all archs ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivative ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivative ARM: 6278/2: fix regression in RealView after the introduction of pclk Luotao Fu (2): pca100: add framebuffer device support and TFT pca100: clean up GPIO pin multiplexing Magnus Damm (3): ARM: 6206/1: CONFIG_FORCE_MAX_ZONEORDER update for SH-Mobile ARM ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 Marc Kleine-Budde (5): mx25: add flexcan address and interrupt definition mx35: adjust flexcan clock definition mx35: add flexcan address imx: dynamically register flexcan devices for mx25 and mx35 pcm043: register flexcan device Martin Michlmayr (6): [ARM] Kirkwood: Export GPIO indicating jumper setting of JP1 [ARM] Kirkwood: Fix explanation of MPP45 for QNAP TS41x [ARM] orion5x: Set links to solid on D-Link DNS-323 [ARM] Kirkwood: Add MPP44 (board ID) on TS-219 [ARM] Kirkwood: Add support for HP t5325 Thin Client [ARM] Orion: DNS-323 C1 requires phylib Mathias Nyman (1): omap: tsl2563 ALS support for Nokia N900 Michael Bohan (1): arm: mm: Don't free prohibited memmap entries Michal Marek (1): ARM: 6328/1: Build with -fno-dwarf2-cfi-asm Mika Westerberg (6): ARM: 6116/1: kdump: reserve memory for crashkernel ARM: 6117/1: kdump: implement crash_setup_regs() ARM: 6118/1: kdump: implement machine_crash_shutdown() ARM: 6119/1: kdump: skip indirection page when crashing ARM: 6120/1: kdump: implement copy_oldmem_page() ARM: 6122/1: kdump: add support for elfcorehdr parameter Mikael Pettersson (1): ARM: 6329/1: wire up sys_accept4() on ARM Mike Rapoport (1): omap3: introduce omap3_map_io Nicolas Ferre (2): ARM: 6169/1: AT91: add new at91 chips in at91sam9g45 family ARM: 6185/1: AT91: PM: dual ram controller support Nicolas Pitre (16): [ARM] implement arch_randomize_brk() [ARM] add address randomization to mmap() ARM: initial stack protector (-fstack-protector) support ARM: stack protector: change the canary value per task [ARM] Kirkwood: fix HP t5325 after commit 6605742f2a [ARM] Kirkwood: more factorization of the PCIe init code [ARM] Kirkwood: add missing machine targets to defconfig Merge commit '7b70c4275f' Merge remote branch 'catalin/stable-2.6.35' Merge remote branch 'willd/for-linaro' Merge commit 'd21872b' Merge commit 'linaro_merge_100811'; commit 'v2.6.35.2' into linaro_stable_10.11 Revert "perf symbols: work around incorrect ET_EXEC symbol adjustment" Merge remote branch 'remotes/willd/perf-tools' into linaro_stable_10.11 ARM: fix ASLR of PIE executables Merge commit 'v2.6.35.3' into linaro_stable_10.11 Nishanth Menon (4): omap2/3/4: serial: remove initialization sparse warnings omap2/3/4: serial: kill dev_attr_sleep_timeout sparse warn omap2/3/4: serial: introduce errata handling omap2/3: id: fix sparse warning Ohad Ben-Cohen (6): omap: zoom2: wlan board muxing omap: zoom3: wlan board muxing omap: mailbox: convert rwlocks to spinlock omap: mailbox cleanup: split MODULE_AUTHOR line omap: mailbox: remove (un)likely macros from cold paths omap: mailbox: convert block api to kfifo Olaf Rempel (1): [ARM] orion/kirkwood: reset PCIe unit on boot Paul Walmsley (9): OMAP: clock: add kerneldoc for structures; move flags closer to structs OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz oscillator) OMAP1: clock: some cleanup OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup() OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va OMAP2+: hwmod/device: update documentation and copyright OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat() OMAP: PM constraints: add omap_pm_set_min_clk_rate() Pavel Machek (1): Add GPIO support for HTC Dream. Rabin Vincent (24): ARM: 6150/1: gic: implement set_type ARM: 6147/1: nomadik-gpio: set val in ->direction_output() ARM: 6148/1: nomadik-gpio: add function to configure pullup/pulldown ARM: 6149/1: nomadik-gpio: add function to configure sleep mode behaviour ARM: 6154/1: nomadik-gpio: refactor nmk_gpio_set_mode ARM: 6155/1: nomadik-gpio: add pin configuration API ARM: 6156/1: nomadik-gpio: switch to core_initcall ARM: 6175/1: nomadik-gpio: implement set_wake ARM: 6176/1: nomadik-gpio: implement to_irq ARM: 6177/1: nomadik-gpio: fix "ignoring return value" warning ARM: 6161/1: mop500: add basic pin configuration ARM: 6160/1: ux500: add DB8500 pin configs ARM: 6266/1: ux500: add separate irq lists for DB8500 and DB5500 ARM: 6267/1: mop500: add AB8500 interrupt support ARM: 6237/1: mmci: use sg_miter API to fix multi-page sg handling ARM: 6238/1: mmci: fix multi block transfers ARM: 6239/1: mmci: let core poll for card detection ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6287/1: ftrace: clean up mcount assembly indentation ARM: 6288/1: ftrace: document mcount formats ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR" Rajendra Nayak (2): OMAP4: hwmod: Enable omap_device build for OMAP4 omap4: suspend: Add basic system suspend support Rogerio Pimentel (1): mx27_3ds: add support for the keypad Russell King (39): ARM: Prohibit ioremap() on kernel managed RAM ARM: Remove support for LinkUp Systems L7200 SDP. Merge git://git.linaro.org/nico/arm_security into devel-stable ARM: Precalculate vmalloc_min ARM: Remove DISCONTIGMEM support ARM: Remove 'node' argument form arch_adjust_zones() ARM: Move platform memory reservations out of generic code ARM: OMAP: Cleanup OMAP FB SDRAM reservation ARM: OMAP: Convert to use ->reserve method to reserve boot time memory ARM: early_alloc() Merge branch 'l7200' into devel Merge git://git.kernel.org/.../nico/orion into devel-stable ARM: AMBA: Add pclk definition for platforms using primecells Merge branch 'master' of git://git.infradead.org/users/cbou/linux-cns3xxx into devel-stable ARM: fix build warning in asm/elf.h ARM: early_pte_alloc() ARM: initial LMB trial ARM: Convert platform reservations to use LMB rather than bootmem ARM: OMAP: Convert OMAPFB and VRAM SDRAM reservation to LMB ARM: LMB: Convert arm_memory_present() to use LMB memory information ARM: LMB: convert pfn_valid to use LMB ARM: Remove unnecessary call to find_limits() ARM: Versatile: fix section mismatch Merge branch 'origin' into misc ARM: use generic ioremap_page_range() ARM: DMA coherent allocator: align remapped addresses ARM: Factor out common code from cpu_proc_fin() ARM: SMP: Always enable clock event broadcast support ARM: call machine_shutdown() from machine_halt(), etc ARM: Fix section build warnings for AMBA drivers Merge branch 'wells/lpc32xx-arch_v2' of git://git.lpclinux.com/linux-2.6-lpc into devel-stable Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable Merge branch 'arm/booting' of git://git.pengutronix.de/git/ukl/linux-2.6 into devel-stable ARM: AMBA: Add pclk support to AMBA bus infrastructure Merge branch 'shmobile' into devel Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel Merge branch 'misc' into devel Merge branch 'devel-stable' into devel ARM: Tighten check for allowable CPSR values Ryan Mallon (3): ARM: 6200/1: AT91: Define NR_BUILTIN_GPIO ARM: 6209/2: at91: Add support for Bluewater Systems Snapper 9260/9G20 modules ARM: 6209/3: at91_udc: Add vbus polarity and polling mode Saeed Bishara (6): [ARM] Kirkwood: configure NAND mpp's for db88f6281 [ARM] Kirkwood: add support for rev A1 of the 88f6192 and 88f6180 chips. [ARM] Kirkwood: Add support for 88f6282 [ARM] PCI: add platform private data to pci_sys_data [ARM] Kirkwood: add support for PCIe1 [ARM] Dove: platform device registration for the sdio interfaces Samu Onkalo (1): omap: dma: Support for prefetch in destination synchronizedtransfer Santosh Shilimkar (3): omap4: mmc: Fix the regulator resource for MMC2 on 4430sdp omap4: Add smc API to read AuxCoreBoot0 register omap4: hotplug: Add basic CPU hotplug support Sascha Hauer (2): mxc_nand: Fix OOB handling mx25: flexcan clock support Sergio Aguirre (1): omap3: Unify omap2_set_globals_3[43,6x]x functions Shubhrajyoti Datta (1): omap4: Board changes for 4430sdp tmp105 temperature sensor Simon Guinot (3): [ARM] Kirkwood: add LaCie Network Space Max v2 support leds: add LED driver for Network Space v2 LEDs [ARM] Kirkwood: update LED support for Network Space v2 Steve Sakoman (1): omap: Overo: Fix support for second ethernet port Sukumar Ghorai (8): omap3 gpmc: functionality enhancement omap3 nand: cleanup virtual address usages omap3 nand: fix issue in board file to detect nand omap3 flash: rename board-sdp-flash.c to be use by other boards omap3: add support for NAND on zoom2 board omap3: add support for NAND on zoom3 board omap-3630-sdp : Add support for Flash omap3: add support for NAND on LDP board Thomas Weber (10): OMAP2: Devkit8000: Cleanup for power supplies OMAP2: Devkit8000: change panel to generic panel OMAP2: Devkit8000: Remove unneeded VDVI supply OMAP2: Devkit8000: Remove non existing vsim supply OMAP2: Devkit8000: Remove en-/disable for tv panel OMAP2: Devkit8000: Using the REGULATOR_SUPPLY macro OMAP2: Devkit8000: Using gpio_is_valid macro OMAP2: Devkit8000: Remove unused omap_board_config OMAP2: Devkit8000: Fix regulator for power supply OMAP2: powerdomain: Add break in switch statement Tim Gardner (5): UBUNTU: [Config] Find ABI files according to their source package name UBUNTU: [Config] getabi: Only get armel omap and vexpress UBUNTU: Bump ABI UBUNTU: [Config] Changed flavour names from {omap,vexpress} to linaro-{omap,vexpress} UBUNTU: Linaro-2.6.35-1002.6 Tony Lindgren (36): Merge branch 'v2.6.35-rc3-iommu-for-next' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus omap: Separate out omap2 FS USB platform init functions omap: Move omap2 FS USB platform init code into mach-omap2/usb-fs.c omap: Enable interface clock for omap2 FS USB omap: Move omap1 USB platform init code into mach-omap1/usb.c omap: mux: Fix omap_mux_init_gpio for omap24xx omap: mux: Renumber package defines to make room for older 24xx packages omap: mux: Allow compiling in new mux code on all mach-omap2 systems omap: mux: Remove unncessary parens from mux34xx.c omap: mux: Add data for 2420 omap: mux: Add data for 2430 omap: mux: Select SIP package for H4 omap: mux: Select POP package for Apollon omap: mux: Select POP package for N8X0 omap: mux: Select POP package for 2430SDP omap: mux: Make omap2 FS USB code use new mux functions omap: mux: Do keypad muxing in board-*.c files omap: mux: Mux Apollon LCD power in board-apollon.c omap: mux: Mux 2430 USB0HS_STP in board-2430.c omap: mux: Convert 2420 platform init code to use new mux code omap: mux: Remove old mux code ARM: Disable VGA console for ARM in most cases omap: Use 32KiHZ timer by default omap: Make omap specific features appear under Kconfig menu omap2/3/4: Move Kconfig options to mach-omap2/Kconfig omap2/3/4: Select all omaps and boards by default omap2/3/4: Add Kconfig option to compile in typical omap features ARM: 6203/1: Make VFPv3 usable on ARMv6 ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6 omap: Add back UART MDR1 check into uncompress.h omap2: Fix GPIO numbers and smc91x for 2430sdp Merge branch 'devel-misc' into omap-for-linus Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into omap-for-linus Merge branch 'devel-map-io' into omap-for-linus Merge branch 'v2.6.35-omap-mailbox-for-next' of git://gitorious.org/~doyu/lk/mainline into omap-for-linus arm: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6 Uwe Kleine-König (68): ARM: mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number ARM: mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its arch number ARM: zImage: don't hard code the stack size twice ARM: zImage: some comments for __armv3_mpu_cache_on ARM: zImage: __armv3_mpu_cache_flush: respect should-be-zero specification ARM: zImage: fix comments for cache_on, cache_off and cache_clean_flush ARM: zImage: annotate debug functions about corrupted registers ARM: mx1: don't use deprecated symbol names ARM: mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy ARM: mx2/mx27_3ds: document alternative names and remove empty header ARM: imx: remove empty and unused board headers ARM: mx3/kzm_arm11_01: fold board header in its only user ARM: mx2/mx21ads: fold board header in its only user ARM: mx2/mx27ads: fold board header in its only user ARM: mx3/qong: get rid of nearly empty header ARM: mx3/mx31_3ds: fold board header in its only user ARM: mx3/mx31ads: fold board header in its only user ARM: mxc: grammar fix ARM: imx: rename mach dir for mx21 and mx27 to mach-imx ARM: imx/mx1: fold crm_regs.h into its only consumer ARM: imx: get rid of mxc_gpio_init ARM: imx: fold serial.c into devices.c ARM: imx1: rename imx_csi_device to match its .name ARM: imx1: rename imx_i2c_device to follow a common naming scheme ARM: imx1: rename imx_uart[12]_device to follow a common naming scheme ARM: imx: rename mxc_uart_devicex to follow a common naming scheme ARM: imx: move mx1 support to mach-imx ARM: imx: Kconfig: use an if block instead of a depend for many symbols ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27 ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2 ARM: imx: new helper function imx_add_platform_device MTD: mxc_nand: make bit fields unsigned to please sparse ARM: imx: remove paragraphs with old address of the FSF ARM: mx25: remove paragraphs with old address of the FSF ARM: mx3: remove paragraphs with old address of the FSF ARM: mxc91231: remove paragraphs with old address of the FSF ARM: mxc: remove paragraphs with old address of the FSF ARM: imx: Change the way nand devices are registered (generic part) ARM: imx: Change the way nand devices are registered (imx21) ARM: imx: Change the way nand devices are registered (imx25) ARM: imx: Change the way nand devices are registered (imx27) ARM: imx: Change the way nand devices are registered (imx31) ARM: imx: Change the way nand devices are registered (imx35) ARM: imx: dynamically register imx-i2c devices (generic part) ARM: imx: dynamically register imx-i2c devices (imx1) ARM: imx: dynamically register imx-i2c devices (imx21) ARM: imx: dynamically register imx-i2c devices (imx25) ARM: imx: dynamically register imx-i2c devices (imx27) ARM: imx: dynamically register imx-i2c devices (imx31) ARM: imx: dynamically register imx-i2c devices (imx35) ARM: imx: dynamically register spi_imx devices (generic part) ARM: imx: dynamically register spi_imx devices (imx21) ARM: imx: dynamically register spi_imx devices (imx25) ARM: imx: dynamically register spi_imx devices (imx27) ARM: imx: dynamically register spi_imx devices (imx31) ARM: imx: dynamically register spi_imx devices (imx35) ARM: imx: dynamically register imx-uart devices (generic part) ARM: imx: dynamically register imx-uart devices (imx1) ARM: imx: dynamically register imx-uart devices (imx21) ARM: imx: dynamically register imx-uart devices (imx25) ARM: imx: dynamically register imx-uart devices (imx27) ARM: imx: dynamically register imx-uart devices (imx31) ARM: imx: dynamically register imx-uart devices (imx35) ARM: mx3: complement uart init routine with an exit routine ARM: remove bit-rotten STANDALONE_DEBUG for decompressor ARM: zImage: don't define unused symbol initrd_phys ARM: deprecate support for old way to pass kernel parameters Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD Vincent Sanders (1): Remove ARM default configurations which duplicate omap3_defconfig Will Deacon (14): ARM: 6218/1: Versatile Express: add support for local timers on CA9X4 daughterboard ARM: 6198/1: perf probe: Add ARM DWARF register number mappings ARM: 6199/1: Add kprobe-based event tracer ARM: 6213/1: atomic64_test: add ARM as supported architecture Versatile Express: add support for local timers on CA9X4 daughterboard ARM: Add kprobe-based event tracer ARM: perf probe: Add ARM DWARF register number mappings ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID ARM: flush_ptrace_access: invalidate all I-caches ARM: atomic64_test: add ARM as supported architecture Merge branches 'atomic-fixes', 'misc-patches', 'perf-probe' and 'sw-breakpoint' into for-linaro Merge branch 'perf-tools' into for-linaro ARM: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID ARM: flush_ptrace_access: invalidate all I-caches Wolfram Sang (1): pcm037/pcm043/pca100: fix ULPI-related build warnings eric miao (2): ARM: 6197/2: preliminary support for sparse IRQ ARM: 6251/1: Make SPARSE_IRQ a hidden option stanley.miao (1): OMAP3: AM3505/3517 do not have IO wakeup capability wanzongshun (5): ARM: 6231/1: re-organize the nuc900 lcd arch platform data setting ARM: 6232/1: add nuc900 keypad arch platform data ARM: 6249/1: add nuc900 kpi platform_device structure to nuc910_dev ARM: 6250/1: patch for modifying spi flash configuration ARM: 6274/1: add global control registers definition header file for nuc900 Documentation/arm/00-INDEX | 2 + Documentation/arm/memory.txt | 8 +- Documentation/arm/swp_emulation | 27 + Documentation/arm/tcm.txt | 30 +- arch/arm/Kconfig | 193 +- arch/arm/Makefile | 9 +- arch/arm/boot/Makefile | 8 +- arch/arm/boot/compressed/Makefile | 15 +- arch/arm/boot/compressed/Makefile.debug | 23 - arch/arm/boot/compressed/head-l7200.S | 29 - arch/arm/boot/compressed/head.S | 41 +- arch/arm/boot/compressed/misc.c | 20 - arch/arm/common/gic.c | 46 + arch/arm/common/sa1111.c | 5 +- arch/arm/configs/am3517_evm_defconfig | 127 - arch/arm/configs/cm_t35_defconfig | 157 - arch/arm/configs/devkit8000_defconfig | 184 - arch/arm/configs/igep0020_defconfig | 179 - arch/arm/configs/kirkwood_defconfig | 8 + arch/arm/configs/lusl7200_defconfig | 23 - arch/arm/configs/omap3_beagle_defconfig | 134 - arch/arm/configs/omap3_evm_defconfig | 160 - arch/arm/configs/omap3_pandora_defconfig | 158 - arch/arm/configs/omap3_stalker_lks_defconfig | 150 - arch/arm/configs/omap3_touchbook_defconfig | 621 -- arch/arm/configs/omap_2430sdp_defconfig | 136 - arch/arm/configs/omap_3430sdp_defconfig | 178 - arch/arm/configs/omap_3630sdp_defconfig | 154 - arch/arm/configs/omap_apollon_2420_defconfig | 92 - arch/arm/configs/omap_h4_2420_defconfig | 107 - arch/arm/configs/omap_ldp_defconfig | 135 - arch/arm/configs/omap_zoom2_defconfig | 143 - arch/arm/configs/omap_zoom3_defconfig | 155 - arch/arm/configs/overo_defconfig | 275 - arch/arm/configs/rx51_defconfig | 222 - arch/arm/include/asm/assembler.h | 13 +- arch/arm/include/asm/cacheflush.h | 9 +- arch/arm/include/asm/domain.h | 31 +- arch/arm/include/asm/elf.h | 3 + arch/arm/include/asm/futex.h | 9 +- arch/arm/include/asm/hwcap.h | 1 + arch/arm/include/asm/irq.h | 2 + arch/arm/include/asm/kexec.h | 22 +- arch/arm/include/asm/mach/arch.h | 2 + arch/arm/include/asm/mach/irq.h | 1 + arch/arm/include/asm/mach/map.h | 2 + arch/arm/include/asm/mach/pci.h | 1 + arch/arm/include/asm/memblock.h | 16 + arch/arm/include/asm/memory.h | 76 +- arch/arm/include/asm/mmzone.h | 30 - arch/arm/include/asm/pgtable.h | 29 +- arch/arm/include/asm/ptrace.h | 53 +- arch/arm/include/asm/setup.h | 8 +- arch/arm/include/asm/smp_plat.h | 4 + arch/arm/include/asm/system.h | 2 +- arch/arm/include/asm/tlbflush.h | 12 +- arch/arm/include/asm/tls.h | 46 + arch/arm/include/asm/traps.h | 2 + arch/arm/include/asm/uaccess.h | 16 +- arch/arm/include/asm/unistd.h | 1 + arch/arm/include/asm/vfpmacros.h | 18 + arch/arm/kernel/Makefile | 6 +- arch/arm/kernel/calls.S | 1 + arch/arm/kernel/compat.c | 7 - arch/arm/kernel/compat.h | 2 - arch/arm/kernel/crash_dump.c | 60 + arch/arm/kernel/entry-armv.S | 29 +- arch/arm/kernel/entry-common.S | 124 +- arch/arm/kernel/fiq.c | 5 + arch/arm/kernel/irq.c | 41 +- arch/arm/kernel/machine_kexec.c | 14 +- arch/arm/kernel/module.c | 34 + arch/arm/kernel/process.c | 29 +- arch/arm/kernel/ptrace.c | 96 + arch/arm/kernel/relocate_kernel.S | 6 + arch/arm/kernel/setup.c | 113 +- arch/arm/kernel/smp.c | 17 +- arch/arm/kernel/smp_twd.c | 3 +- arch/arm/kernel/swp_emulate.c | 260 + arch/arm/kernel/tcm.c | 118 +- arch/arm/kernel/traps.c | 55 +- arch/arm/lib/Makefile | 1 - arch/arm/lib/getuser.S | 13 +- arch/arm/lib/putuser.S | 29 +- arch/arm/lib/uaccess.S | 83 +- arch/arm/mach-aaec2000/include/mach/memory.h | 10 - arch/arm/mach-at91/Kconfig | 11 + arch/arm/mach-at91/Makefile | 3 + arch/arm/mach-at91/at91sam9g45.c | 11 + arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 45 + arch/arm/mach-at91/board-sam9g20ek.c | 45 + arch/arm/mach-at91/board-snapper9260.c | 189 + arch/arm/mach-at91/include/mach/at91cap9.h | 2 +- arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h | 22 +- arch/arm/mach-at91/include/mach/at91sam9260.h | 2 +- arch/arm/mach-at91/include/mach/at91sam9261.h | 2 +- arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 130 + arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 23 +- arch/arm/mach-at91/include/mach/at91sam9rl.h | 2 +- arch/arm/mach-at91/include/mach/board.h | 2 + arch/arm/mach-at91/include/mach/cpu.h | 10 + arch/arm/mach-at91/include/mach/gpio.h | 1 + arch/arm/mach-at91/pm.h | 49 +- arch/arm/mach-at91/pm_slowclock.S | 74 +- arch/arm/mach-bcmring/core.c | 23 +- arch/arm/mach-clps711x/Kconfig | 1 - arch/arm/mach-clps711x/clep7312.c | 1 - arch/arm/mach-clps711x/edb7211-arch.c | 10 +- arch/arm/mach-clps711x/fortunet.c | 1 - arch/arm/mach-clps711x/include/mach/memory.h | 2 - arch/arm/mach-cns3xxx/Makefile | 3 +- arch/arm/mach-cns3xxx/cns3420vb.c | 4 + arch/arm/mach-cns3xxx/devices.c | 111 + arch/arm/mach-cns3xxx/devices.h | 20 + arch/arm/mach-cns3xxx/include/mach/cns3xxx.h | 91 +- arch/arm/mach-cns3xxx/pcie.c | 389 + arch/arm/mach-cns3xxx/pm.c | 31 +- arch/arm/mach-davinci/include/mach/memory.h | 9 +- arch/arm/mach-dove/common.c | 61 + arch/arm/mach-dove/common.h | 2 + arch/arm/mach-dove/dove-db-setup.c | 2 + arch/arm/mach-ep93xx/adssphere.c | 24 +- arch/arm/mach-ep93xx/clock.c | 2 +- arch/arm/mach-ep93xx/core.c | 46 +- arch/arm/mach-ep93xx/edb93xx.c | 31 +- arch/arm/mach-ep93xx/gesbc9312.c | 24 +- arch/arm/mach-ep93xx/include/mach/platform.h | 3 + arch/arm/mach-ep93xx/micro9.c | 37 +- arch/arm/mach-ep93xx/simone.c | 24 +- arch/arm/mach-ep93xx/ts72xx.c | 27 +- arch/arm/mach-imx/Kconfig | 193 + arch/arm/{mach-mx2 => mach-imx}/Makefile | 18 +- arch/arm/{mach-mx2 => mach-imx}/Makefile.boot | 4 + .../{mach-mx1/clock.c => mach-imx/clock-imx1.c} | 50 +- .../clock_imx21.c => mach-imx/clock-imx21.c} | 0 .../clock_imx27.c => mach-imx/clock-imx27.c} | 2 +- .../{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} | 0 arch/arm/mach-imx/devices-imx1.h | 18 + arch/arm/mach-imx/devices-imx21.h | 30 + arch/arm/mach-imx/devices-imx27.h | 38 + arch/arm/{mach-mx2 => mach-imx}/devices.c | 296 +- arch/arm/{mach-mx2 => mach-imx}/devices.h | 32 +- .../{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} | 4 +- arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 392 + arch/arm/mach-imx/include/mach/dma-mx1-mx2.h | 10 + .../include/mach/dma-v1.h} | 10 +- arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c | 122 +- arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c | 11 +- arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c | 34 +- arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c | 58 +- arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c | 40 +- arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c | 76 +- arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c | 36 +- arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c | 114 +- arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c | 33 +- arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c | 21 +- .../arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} | 23 +- arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c | 5 +- arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c | 5 +- .../ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} | 0 .../mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} | 0 arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c | 0 arch/arm/mach-imx/pm-imx27.c | 46 + arch/arm/mach-integrator/common.h | 1 + arch/arm/mach-integrator/core.c | 19 +- arch/arm/mach-integrator/integrator_ap.c | 3 + arch/arm/mach-integrator/integrator_cp.c | 3 + arch/arm/mach-integrator/pci_v3.c | 8 +- arch/arm/mach-iop13xx/include/mach/memory.h | 2 - arch/arm/mach-iop13xx/pci.c | 2 +- arch/arm/mach-ixp2000/pci.c | 2 +- arch/arm/mach-ixp23xx/pci.c | 2 +- arch/arm/mach-ixp4xx/common-pci.c | 7 +- arch/arm/mach-ixp4xx/include/mach/memory.h | 6 +- arch/arm/mach-kirkwood/Kconfig | 19 + arch/arm/mach-kirkwood/Makefile | 2 + arch/arm/mach-kirkwood/addr-map.c | 10 +- arch/arm/mach-kirkwood/common.c | 38 +- arch/arm/mach-kirkwood/common.h | 5 +- arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 18 +- arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 +- arch/arm/mach-kirkwood/include/mach/irqs.h | 1 + arch/arm/mach-kirkwood/include/mach/kirkwood.h | 39 +- arch/arm/mach-kirkwood/include/mach/leds-ns2.h | 26 + arch/arm/mach-kirkwood/mpp.c | 3 +- arch/arm/mach-kirkwood/mpp.h | 596 +- arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 2 +- arch/arm/mach-kirkwood/netspace_v2-setup.c | 104 +- arch/arm/mach-kirkwood/netxbig_v2-setup.c | 32 +- arch/arm/mach-kirkwood/openrd-setup.c | 29 +- arch/arm/mach-kirkwood/pcie.c | 174 +- arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 2 +- arch/arm/mach-kirkwood/rd88f6281-setup.c | 2 +- arch/arm/mach-kirkwood/t5325-setup.c | 194 + arch/arm/mach-kirkwood/ts219-setup.c | 11 +- arch/arm/mach-kirkwood/ts41x-setup.c | 39 +- arch/arm/mach-ks8695/pci.c | 4 +- arch/arm/mach-l7200/Makefile | 11 - arch/arm/mach-l7200/Makefile.boot | 2 - arch/arm/mach-l7200/core.c | 100 - arch/arm/mach-l7200/include/mach/aux_reg.h | 28 - arch/arm/mach-l7200/include/mach/debug-macro.S | 40 - arch/arm/mach-l7200/include/mach/entry-macro.S | 35 - arch/arm/mach-l7200/include/mach/gp_timers.h | 42 - arch/arm/mach-l7200/include/mach/gpio.h | 105 - arch/arm/mach-l7200/include/mach/hardware.h | 57 - arch/arm/mach-l7200/include/mach/io.h | 21 - arch/arm/mach-l7200/include/mach/irqs.h | 56 - arch/arm/mach-l7200/include/mach/memory.h | 26 - arch/arm/mach-l7200/include/mach/pmpcon.h | 46 - arch/arm/mach-l7200/include/mach/pmu.h | 125 - arch/arm/mach-l7200/include/mach/serial.h | 37 - arch/arm/mach-l7200/include/mach/serial_l7200.h | 101 - arch/arm/mach-l7200/include/mach/sib.h | 119 - arch/arm/mach-l7200/include/mach/sys-clock.h | 67 - arch/arm/mach-l7200/include/mach/system.h | 29 - arch/arm/mach-l7200/include/mach/time.h | 73 - arch/arm/mach-l7200/include/mach/timex.h | 20 - arch/arm/mach-l7200/include/mach/uncompress.h | 39 - arch/arm/mach-l7200/include/mach/vmalloc.h | 4 - arch/arm/mach-lh7a40x/include/mach/memory.h | 44 - arch/arm/mach-lpc32xx/Kconfig | 33 + arch/arm/mach-lpc32xx/Makefile | 8 + arch/arm/mach-lpc32xx/Makefile.boot | 4 + arch/arm/mach-lpc32xx/clock.c | 1137 +++ arch/arm/mach-lpc32xx/clock.h | 38 + arch/arm/mach-lpc32xx/common.c | 271 + arch/arm/mach-lpc32xx/common.h | 73 + arch/arm/mach-lpc32xx/gpiolib.c | 446 ++ .../include/mach/clkdev.h} | 19 +- .../include/mach/debug-macro.S} | 25 +- arch/arm/mach-lpc32xx/include/mach/entry-macro.S | 47 + arch/arm/mach-lpc32xx/include/mach/gpio.h | 74 + arch/arm/mach-lpc32xx/include/mach/hardware.h | 34 + arch/arm/mach-lpc32xx/include/mach/i2c.h | 63 + .../include/mach/io.h} | 21 +- arch/arm/mach-lpc32xx/include/mach/irqs.h | 117 + .../include/mach/memory.h} | 21 +- arch/arm/mach-lpc32xx/include/mach/platform.h | 694 ++ arch/arm/mach-lpc32xx/include/mach/system.h | 52 + .../include/mach/timex.h} | 22 +- arch/arm/mach-lpc32xx/include/mach/uncompress.h | 60 + .../include/mach/vmalloc.h} | 18 +- arch/arm/mach-lpc32xx/irq.c | 432 + arch/arm/mach-lpc32xx/phy3250.c | 397 + arch/arm/mach-lpc32xx/pm.c | 146 + arch/arm/mach-lpc32xx/serial.c | 190 + arch/arm/mach-lpc32xx/suspend.S | 151 + arch/arm/mach-lpc32xx/timer.c | 182 + arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/board-trout-gpio.c | 112 + arch/arm/mach-msm/board-trout.c | 1 - arch/arm/mach-msm/board-trout.h | 157 + arch/arm/mach-msm/include/mach/gpio.h | 7 + arch/arm/mach-mx1/Kconfig | 19 - arch/arm/mach-mx1/Makefile | 15 - arch/arm/mach-mx1/Makefile.boot | 4 - arch/arm/mach-mx1/crm_regs.h | 55 - arch/arm/mach-mx1/devices.c | 242 - arch/arm/mach-mx1/devices.h | 7 - arch/arm/mach-mx2/Kconfig | 116 - arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 249 - arch/arm/mach-mx2/serial.c | 141 - arch/arm/mach-mx25/Kconfig | 23 + arch/arm/mach-mx25/Makefile | 4 +- arch/arm/mach-mx25/clock.c | 70 +- arch/arm/mach-mx25/devices-imx25.h | 43 + arch/arm/mach-mx25/devices.c | 313 +- arch/arm/mach-mx25/devices.h | 16 +- arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c | 260 + arch/arm/mach-mx25/mach-cpuimx25.c | 173 + .../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} | 58 +- arch/arm/mach-mx25/mm.c | 7 +- arch/arm/mach-mx3/Kconfig | 53 + arch/arm/mach-mx3/Makefile | 4 +- arch/arm/mach-mx3/clock-imx35.c | 6 +- arch/arm/mach-mx3/devices-imx31.h | 38 + arch/arm/mach-mx3/devices-imx35.h | 37 + arch/arm/mach-mx3/devices.c | 247 +- arch/arm/mach-mx3/devices.h | 13 - arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 263 + arch/arm/mach-mx3/mach-armadillo5x0.c | 17 +- arch/arm/mach-mx3/mach-cpuimx35.c | 227 + arch/arm/mach-mx3/mach-kzm_arm11_01.c | 31 +- arch/arm/mach-mx3/mach-mx31_3ds.c | 256 +- arch/arm/mach-mx3/mach-mx31ads.c | 55 +- arch/arm/mach-mx3/mach-mx31lilly.c | 15 +- arch/arm/mach-mx3/mach-mx31lite.c | 17 +- arch/arm/mach-mx3/mach-mx31moboard.c | 50 +- .../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} | 16 +- arch/arm/mach-mx3/mach-pcm037.c | 34 +- arch/arm/mach-mx3/mach-pcm037_eet.c | 7 +- arch/arm/mach-mx3/mach-pcm043.c | 31 +- arch/arm/mach-mx3/mach-qong.c | 16 +- arch/arm/mach-mx3/mm.c | 7 +- arch/arm/mach-mx3/mx31lilly-db.c | 14 +- arch/arm/mach-mx3/mx31lite-db.c | 15 +- arch/arm/mach-mx3/mx31moboard-devboard.c | 10 +- arch/arm/mach-mx3/mx31moboard-marxbot.c | 4 - arch/arm/mach-mx3/mx31moboard-smartbot.c | 11 +- arch/arm/mach-mx5/Kconfig | 27 + arch/arm/mach-mx5/Makefile | 4 +- arch/arm/mach-mx5/board-cpuimx51.c | 293 + arch/arm/mach-mx5/board-mx51_3ds.c | 164 + arch/arm/mach-mx5/board-mx51_babbage.c | 28 +- arch/arm/mach-mx5/clock-mx51.c | 16 + arch/arm/mach-mx5/devices.c | 83 +- arch/arm/mach-mx5/devices.h | 4 + arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 200 + arch/arm/mach-mx5/mm.c | 3 + arch/arm/mach-mxc91231/crm_regs.h | 5 - arch/arm/mach-mxc91231/devices.c | 2 +- arch/arm/mach-mxc91231/mm.c | 8 +- arch/arm/mach-nomadik/clock.c | 4 + arch/arm/mach-omap1/Kconfig | 13 + arch/arm/mach-omap1/Makefile | 3 + arch/arm/mach-omap1/board-ams-delta.c | 3 +- arch/arm/mach-omap1/board-fsample.c | 13 + arch/arm/mach-omap1/board-generic.c | 5 +- arch/arm/mach-omap1/board-h2.c | 32 +- arch/arm/mach-omap1/board-h3.c | 16 +- arch/arm/mach-omap1/board-htcherald.c | 3 +- arch/arm/mach-omap1/board-innovator.c | 5 +- arch/arm/mach-omap1/board-nokia770.c | 137 +- arch/arm/mach-omap1/board-osk.c | 3 +- arch/arm/mach-omap1/board-palmte.c | 87 +- arch/arm/mach-omap1/board-palmtt.c | 3 +- arch/arm/mach-omap1/board-palmz71.c | 16 +- arch/arm/mach-omap1/board-perseus2.c | 13 + arch/arm/mach-omap1/board-sx1.c | 5 +- arch/arm/mach-omap1/board-voiceblue.c | 3 +- arch/arm/mach-omap1/clock.c | 22 +- arch/arm/mach-omap1/clock.h | 2 +- arch/arm/mach-omap1/clock_data.c | 149 +- arch/arm/mach-omap1/devices.c | 72 - arch/arm/mach-omap1/include/mach/debug-macro.S | 10 +- arch/arm/mach-omap1/io.c | 2 - arch/arm/mach-omap1/mailbox.c | 55 +- arch/arm/mach-omap1/mcbsp.c | 3 - arch/arm/mach-omap1/mux.c | 6 +- arch/arm/mach-omap1/serial.c | 7 + arch/arm/mach-omap1/usb.c | 530 ++ arch/arm/mach-omap2/Kconfig | 89 + arch/arm/mach-omap2/Makefile | 23 +- arch/arm/mach-omap2/board-2430sdp.c | 24 +- arch/arm/mach-omap2/board-3430sdp.c | 25 +- arch/arm/mach-omap2/board-3630sdp.c | 130 +- arch/arm/mach-omap2/board-4430sdp.c | 71 +- arch/arm/mach-omap2/board-am3517evm.c | 9 +- arch/arm/mach-omap2/board-apollon.c | 31 +- arch/arm/mach-omap2/board-cm-t35.c | 29 +- arch/arm/mach-omap2/board-devkit8000.c | 170 +- .../{board-sdp-flash.c => board-flash.c} | 93 +- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-h4.c | 61 +- arch/arm/mach-omap2/board-igep0020.c | 9 +- arch/arm/mach-omap2/board-ldp.c | 44 +- arch/arm/mach-omap2/board-n8x0.c | 14 + arch/arm/mach-omap2/board-omap3beagle.c | 17 +- arch/arm/mach-omap2/board-omap3evm.c | 9 +- arch/arm/mach-omap2/board-omap3pandora.c | 157 +- arch/arm/mach-omap2/board-omap3stalker.c | 8 +- arch/arm/mach-omap2/board-omap3touchbook.c | 34 +- arch/arm/mach-omap2/board-omap4panda.c | 304 + arch/arm/mach-omap2/board-overo.c | 75 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 78 +- arch/arm/mach-omap2/board-rx51-video.c | 1 - arch/arm/mach-omap2/board-rx51.c | 3 +- arch/arm/mach-omap2/board-zoom2.c | 65 +- arch/arm/mach-omap2/board-zoom3.c | 65 +- arch/arm/mach-omap2/clock3xxx_data.c | 7 +- arch/arm/mach-omap2/cm.c | 6 +- arch/arm/mach-omap2/devices.c | 88 +- arch/arm/mach-omap2/gpmc-nand.c | 37 +- arch/arm/mach-omap2/gpmc.c | 284 +- arch/arm/mach-omap2/i2c.c | 27 +- arch/arm/mach-omap2/id.c | 64 +- .../include/mach/{board-sdp.h => board-flash.h} | 9 +- arch/arm/mach-omap2/include/mach/board-zoom.h | 6 + arch/arm/mach-omap2/include/mach/debug-macro.S | 29 +- arch/arm/mach-omap2/include/mach/id.h | 22 + arch/arm/mach-omap2/include/mach/omap4-common.h | 7 + arch/arm/mach-omap2/io.c | 16 +- arch/arm/mach-omap2/iommu2.c | 44 +- arch/arm/mach-omap2/mailbox.c | 182 +- arch/arm/mach-omap2/mcbsp.c | 13 +- arch/arm/mach-omap2/mux.c | 338 +- arch/arm/mach-omap2/mux.h | 28 +- arch/arm/mach-omap2/mux2420.c | 688 ++ arch/arm/mach-omap2/mux2420.h | 282 + arch/arm/mach-omap2/mux2430.c | 791 ++ arch/arm/mach-omap2/mux2430.h | 370 + arch/arm/mach-omap2/mux34xx.c | 8 +- arch/arm/mach-omap2/omap-headsmp.S | 16 - arch/arm/mach-omap2/omap-hotplug.c | 79 + arch/arm/mach-omap2/omap-iommu.c | 2 +- arch/arm/mach-omap2/omap-smp.c | 3 +- arch/arm/mach-omap2/omap44xx-smc.S | 25 + arch/arm/mach-omap2/omap_hwmod.c | 106 +- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 79 +- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 81 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 92 +- arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 + arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 + arch/arm/mach-omap2/pm.c | 84 + arch/arm/mach-omap2/pm24xx.c | 1 - arch/arm/mach-omap2/pm34xx.c | 7 +- arch/arm/mach-omap2/pm44xx.c | 135 + arch/arm/mach-omap2/powerdomain.c | 1 + arch/arm/mach-omap2/powerdomains34xx.h | 12 +- arch/arm/mach-omap2/serial.c | 80 +- arch/arm/mach-omap2/usb-ehci.c | 1 - arch/arm/mach-omap2/usb-fs.c | 359 + arch/arm/mach-omap2/usb-musb.c | 1 - arch/arm/mach-omap2/usb-tusb6010.c | 14 +- arch/arm/mach-orion5x/Kconfig | 1 + arch/arm/mach-orion5x/dns323-setup.c | 370 +- arch/arm/mach-orion5x/include/mach/system.h | 2 + arch/arm/mach-pxa/cm-x2xx-pci.c | 4 +- arch/arm/mach-pxa/corgi.c | 1 - arch/arm/mach-pxa/eseries.c | 1 - arch/arm/mach-pxa/generic.h | 3 +- arch/arm/mach-pxa/include/mach/memory.h | 19 +- arch/arm/mach-pxa/palmt5.c | 7 + arch/arm/mach-pxa/palmtreo.c | 9 + arch/arm/mach-pxa/poodle.c | 1 - arch/arm/mach-pxa/spitz.c | 1 - arch/arm/mach-pxa/tosa.c | 1 - arch/arm/mach-realview/core.c | 40 +- arch/arm/mach-realview/include/mach/board-pb1176.h | 1 + arch/arm/mach-realview/include/mach/irqs-pb1176.h | 2 +- arch/arm/mach-realview/include/mach/memory.h | 7 +- arch/arm/mach-realview/realview_eb.c | 30 +- arch/arm/mach-realview/realview_pb1176.c | 46 +- arch/arm/mach-realview/realview_pb11mp.c | 9 +- arch/arm/mach-realview/realview_pba8.c | 9 +- arch/arm/mach-realview/realview_pbx.c | 9 +- arch/arm/mach-s3c2410/mach-h1940.c | 9 + arch/arm/mach-s3c2412/mach-smdk2413.c | 1 - arch/arm/mach-s3c2412/mach-vstms.c | 1 - arch/arm/mach-s3c2440/mach-rx1950.c | 9 + arch/arm/mach-s3c2440/mach-rx3715.c | 9 + arch/arm/mach-sa1100/generic.h | 3 +- arch/arm/mach-sa1100/include/mach/memory.h | 6 +- arch/arm/mach-shark/include/mach/memory.h | 7 +- arch/arm/mach-shmobile/Kconfig | 12 + arch/arm/mach-shmobile/include/mach/irqs.h | 1 - arch/arm/mach-spear3xx/clock.c | 3 + arch/arm/mach-spear6xx/clock.c | 3 + arch/arm/mach-u300/clock.c | 6 + arch/arm/mach-u300/include/mach/memory.h | 8 - arch/arm/mach-u300/u300.c | 17 + arch/arm/mach-ux500/board-mop500.c | 36 +- arch/arm/mach-ux500/clock.c | 4 + arch/arm/mach-ux500/devices-db8500.c | 14 +- .../mach-ux500/include/mach/irqs-board-mop500.h | 23 + arch/arm/mach-ux500/include/mach/irqs-db5500.h | 85 + arch/arm/mach-ux500/include/mach/irqs-db8500.h | 96 + arch/arm/mach-ux500/include/mach/irqs.h | 22 +- arch/arm/mach-ux500/pins-db8500.h | 742 ++ arch/arm/mach-versatile/core.c | 35 +- arch/arm/mach-versatile/pci.c | 2 +- arch/arm/mach-vexpress/ct-ca9x4.c | 2 + arch/arm/mach-vexpress/include/mach/ct-ca9x4.h | 1 + arch/arm/mach-vexpress/v2m.c | 7 +- arch/arm/mach-w90x900/dev.c | 96 +- arch/arm/mach-w90x900/include/mach/regs-gcr.h | 39 + arch/arm/mach-w90x900/mach-nuc950evb.c | 44 - arch/arm/mach-w90x900/nuc910.c | 2 + arch/arm/mach-w90x900/nuc950.c | 2 - arch/arm/mm/Kconfig | 56 +- arch/arm/mm/Makefile | 1 - arch/arm/mm/alignment.c | 16 +- arch/arm/mm/cache-l2x0.c | 15 +- arch/arm/mm/copypage-v4mc.c | 2 +- arch/arm/mm/copypage-v6.c | 2 +- arch/arm/mm/copypage-xscale.c | 2 +- arch/arm/mm/discontig.c | 45 - arch/arm/mm/dma-mapping.c | 21 +- arch/arm/mm/fault-armv.c | 8 +- arch/arm/mm/fault.c | 56 +- arch/arm/mm/flush.c | 50 +- arch/arm/mm/init.c | 424 +- arch/arm/mm/ioremap.c | 80 +- arch/arm/mm/mm.h | 4 +- arch/arm/mm/mmu.c | 192 +- arch/arm/mm/nommu.c | 22 +- arch/arm/mm/proc-arm1020.S | 6 +- arch/arm/mm/proc-arm1020e.S | 6 +- arch/arm/mm/proc-arm1022.S | 6 +- arch/arm/mm/proc-arm1026.S | 6 +- arch/arm/mm/proc-arm6_7.S | 2 - arch/arm/mm/proc-arm720.S | 6 +- arch/arm/mm/proc-arm740.S | 6 +- arch/arm/mm/proc-arm7tdmi.S | 2 - arch/arm/mm/proc-arm920.S | 10 +- arch/arm/mm/proc-arm922.S | 10 +- arch/arm/mm/proc-arm925.S | 6 +- arch/arm/mm/proc-arm926.S | 6 +- arch/arm/mm/proc-arm940.S | 6 +- arch/arm/mm/proc-arm946.S | 6 +- arch/arm/mm/proc-arm9tdmi.S | 2 - arch/arm/mm/proc-fa526.S | 6 +- arch/arm/mm/proc-feroceon.S | 7 +- arch/arm/mm/proc-macros.S | 7 + arch/arm/mm/proc-mohawk.S | 6 +- arch/arm/mm/proc-sa110.S | 8 +- arch/arm/mm/proc-sa1100.S | 6 +- arch/arm/mm/proc-v6.S | 10 +- arch/arm/mm/proc-v7.S | 16 +- arch/arm/mm/proc-xsc3.S | 6 +- arch/arm/mm/proc-xscale.S | 6 +- arch/arm/mm/vmregion.c | 5 +- arch/arm/mm/vmregion.h | 2 +- arch/arm/plat-iop/pci.c | 2 +- arch/arm/plat-iop/time.c | 53 +- arch/arm/plat-mxc/3ds_debugboard.c | 202 + arch/arm/plat-mxc/Kconfig | 22 +- arch/arm/plat-mxc/Makefile | 5 +- arch/arm/plat-mxc/audmux-v1.c | 4 - arch/arm/plat-mxc/audmux-v2.c | 19 +- arch/arm/plat-mxc/clock.c | 37 +- arch/arm/plat-mxc/devices.c | 33 + arch/arm/plat-mxc/devices/Kconfig | 15 + arch/arm/plat-mxc/devices/Makefile | 8 + arch/arm/plat-mxc/devices/platform-flexcan.c | 30 + arch/arm/plat-mxc/devices/platform-imx-i2c.c | 29 + arch/arm/plat-mxc/devices/platform-imx-uart.c | 60 + arch/arm/plat-mxc/devices/platform-mxc_nand.c | 44 + arch/arm/plat-mxc/devices/platform-spi_imx.c | 30 + arch/arm/plat-mxc/ehci.c | 50 +- arch/arm/plat-mxc/gpio.c | 6 + arch/arm/plat-mxc/include/mach/3ds_debugboard.h | 18 + .../arm/plat-mxc/include/mach/board-armadillo5x0.h | 15 - arch/arm/plat-mxc/include/mach/board-kzmarm11.h | 39 - arch/arm/plat-mxc/include/mach/board-mx21ads.h | 52 - arch/arm/plat-mxc/include/mach/board-mx27ads.h | 344 - arch/arm/plat-mxc/include/mach/board-mx27lite.h | 14 - arch/arm/plat-mxc/include/mach/board-mx27pdk.h | 14 - arch/arm/plat-mxc/include/mach/board-mx31_3ds.h | 59 - arch/arm/plat-mxc/include/mach/board-mx31ads.h | 117 - arch/arm/plat-mxc/include/mach/board-mx31lilly.h | 2 +- arch/arm/plat-mxc/include/mach/board-mx31lite.h | 2 +- arch/arm/plat-mxc/include/mach/board-mx31moboard.h | 2 +- arch/arm/plat-mxc/include/mach/board-pcm038.h | 2 +- arch/arm/plat-mxc/include/mach/board-qong.h | 17 - arch/arm/plat-mxc/include/mach/debug-macro.S | 4 +- arch/arm/plat-mxc/include/mach/devices-common.h | 60 + ...board-eukrea_cpuimx27.h => eukrea-baseboards.h} | 19 +- arch/arm/plat-mxc/include/mach/gpio.h | 1 + arch/arm/plat-mxc/include/mach/iomux-mx25.h | 28 +- arch/arm/plat-mxc/include/mach/iomux-mx51.h | 559 +- arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 4 - arch/arm/plat-mxc/include/mach/iomux-v3.h | 15 + arch/arm/plat-mxc/include/mach/memory.h | 4 +- arch/arm/plat-mxc/include/mach/mmc.h | 3 + arch/arm/plat-mxc/include/mach/mx1.h | 28 +- arch/arm/plat-mxc/include/mach/mx25.h | 50 +- arch/arm/plat-mxc/include/mach/mx27.h | 4 +- arch/arm/plat-mxc/include/mach/mx2_cam.h | 46 + arch/arm/plat-mxc/include/mach/mx31.h | 4 +- arch/arm/plat-mxc/include/mach/mx35.h | 6 +- arch/arm/plat-mxc/include/mach/mx3_camera.h | 4 - arch/arm/plat-mxc/include/mach/mxc91231.h | 4 - arch/arm/plat-mxc/include/mach/mxc_nand.h | 10 +- arch/arm/plat-mxc/include/mach/system.h | 4 - arch/arm/plat-mxc/include/mach/timex.h | 4 - arch/arm/plat-mxc/include/mach/uncompress.h | 4 - arch/arm/plat-mxc/include/mach/vmalloc.h | 4 - arch/arm/plat-mxc/irq.c | 3 - arch/arm/plat-mxc/system.c | 4 - arch/arm/plat-mxc/tzic.c | 2 - arch/arm/plat-nomadik/gpio.c | 316 +- arch/arm/plat-nomadik/include/plat/gpio.h | 15 + arch/arm/plat-nomadik/include/plat/mtu.h | 6 + arch/arm/plat-nomadik/include/plat/pincfg.h | 72 + arch/arm/plat-nomadik/timer.c | 14 +- arch/arm/plat-omap/Kconfig | 33 +- arch/arm/plat-omap/Makefile | 1 + arch/arm/plat-omap/common.c | 18 +- arch/arm/plat-omap/debug-leds.c | 2 +- arch/arm/plat-omap/devices.c | 124 - arch/arm/plat-omap/dma.c | 11 +- arch/arm/plat-omap/fb.c | 77 +- arch/arm/plat-omap/gpio.c | 4 +- arch/arm/plat-omap/i2c.c | 12 +- arch/arm/plat-omap/include/plat/board.h | 8 + arch/arm/plat-omap/include/plat/clock.h | 130 +- arch/arm/plat-omap/include/plat/common.h | 11 +- arch/arm/plat-omap/include/plat/cpu.h | 17 +- arch/arm/plat-omap/include/plat/dma.h | 1 + arch/arm/plat-omap/include/plat/dsp_common.h | 40 - arch/arm/plat-omap/include/plat/gpmc.h | 42 +- arch/arm/plat-omap/include/plat/iommu.h | 2 + arch/arm/plat-omap/include/plat/mailbox.h | 20 +- arch/arm/plat-omap/include/plat/mux.h | 224 +- arch/arm/plat-omap/include/plat/nand.h | 6 +- arch/arm/plat-omap/include/plat/omap-pm.h | 130 +- arch/arm/plat-omap/include/plat/omap_device.h | 2 + arch/arm/plat-omap/include/plat/omap_hwmod.h | 14 +- arch/arm/plat-omap/include/plat/smp.h | 1 + arch/arm/plat-omap/include/plat/uncompress.h | 6 + arch/arm/plat-omap/include/plat/usb.h | 49 +- arch/arm/plat-omap/include/plat/vram.h | 4 +- arch/arm/plat-omap/iommu.c | 27 +- arch/arm/plat-omap/iopgtable.h | 8 +- arch/arm/plat-omap/mailbox.c | 248 +- arch/arm/plat-omap/mux.c | 2 +- arch/arm/plat-omap/omap-pm-noop.c | 61 +- arch/arm/plat-omap/omap_device.c | 37 +- arch/arm/plat-omap/usb.c | 644 +-- arch/arm/plat-orion/pcie.c | 34 + arch/arm/plat-spear/time.c | 47 +- arch/arm/plat-versatile/Makefile | 4 + arch/arm/plat-versatile/leds.c | 103 + arch/arm/vfp/vfpmodule.c | 10 +- debian.linaro/NOTES | 4 + debian.linaro/abi/2.6.35-1003.7/abiname | 1 + debian.linaro/abi/2.6.35-1003.7/armel/linaro-mx51 | 4844 ++++++++++++ .../abi/2.6.35-1003.7/armel/linaro-mx51.modules | 255 + debian.linaro/abi/2.6.35-1003.7/armel/linaro-omap | 8273 ++++++++++++++++++++ .../abi/2.6.35-1003.7/armel/linaro-omap.modules | 1754 +++++ .../abi/2.6.35-1003.7/armel/linaro-vexpress | 5156 ++++++++++++ .../2.6.35-1003.7/armel/linaro-vexpress.modules | 214 + debian.linaro/changelog | 94 + debian.linaro/changelog.historical | 4171 ++++++++++ debian.linaro/config/armel/config.common.armel | 3 + .../config/armel/config.flavour.linaro-mx51 | 540 ++ .../config/armel/config.flavour.linaro-omap | 575 ++ .../config/armel/config.flavour.linaro-vexpress | 570 ++ debian.linaro/config/config.common.ports | 4253 ++++++++++ debian.linaro/config/config.common.ubuntu | 2841 +++++++ debian.linaro/config/enforce | 57 + debian.linaro/control.d/flavour-control.stub | 77 + debian.linaro/control.d/vars.linaro-mx51 | 8 + debian.linaro/control.d/vars.linaro-omap | 8 + debian.linaro/control.d/vars.linaro-vexpress | 8 + debian.linaro/control.stub.in | 21 + debian.linaro/copyright | 29 + debian.linaro/d-i/firmware/README.txt | 4 + debian.linaro/d-i/kernel-versions.in | 6 + debian.linaro/d-i/modules/block-modules | 30 + debian.linaro/d-i/modules/crypto-modules | 8 + debian.linaro/d-i/modules/fat-modules | 7 + debian.linaro/d-i/modules/fs-core-modules | 3 + debian.linaro/d-i/modules/fs-secondary-modules | 5 + debian.linaro/d-i/modules/input-modules | 21 + debian.linaro/d-i/modules/irda-modules | 30 + debian.linaro/d-i/modules/md-modules | 13 + debian.linaro/d-i/modules/mouse-modules | 2 + debian.linaro/d-i/modules/nfs-modules | 4 + debian.linaro/d-i/modules/nic-modules | 155 + debian.linaro/d-i/modules/nic-shared-modules | 22 + debian.linaro/d-i/modules/nic-usb-modules | 27 + debian.linaro/d-i/modules/parport-modules | 2 + debian.linaro/d-i/modules/plip-modules | 1 + debian.linaro/d-i/modules/ppp-modules | 6 + debian.linaro/d-i/modules/sata-modules | 14 + debian.linaro/d-i/modules/scsi-modules | 116 + debian.linaro/d-i/modules/squashfs-modules | 1 + debian.linaro/d-i/modules/storage-core-modules | 10 + debian.linaro/d-i/modules/usb-modules | 9 + debian.linaro/d-i/modules/vlan-modules | 3 + debian.linaro/d-i/package-list | 190 + debian.linaro/etc/getabis | 8 + debian.linaro/etc/kernelconfig | 7 + debian.linaro/rules.d/armel.mk | 16 + debian/commit-templates/newrelease | 2 +- debian/debian.env | 2 +- debian/rules.d/0-common-vars.mk | 2 +- debian/rules.d/1-maintainer.mk | 2 +- debian/rules.d/2-binary-arch.mk | 2 +- debian/scripts/misc/getabis | 5 +- debian/scripts/misc/insert-changes.pl | 2 +- debian/scripts/misc/insert-ubuntu-changes | 2 +- debian/scripts/misc/kernelconfig | 2 +- debian/scripts/module-inclusion | 2 +- drivers/amba/bus.c | 88 +- drivers/gpio/pl061.c | 4 +- drivers/leds/Kconfig | 9 + drivers/leds/Makefile | 1 + drivers/leds/leds-ns2.c | 338 + drivers/media/video/Kconfig | 13 + drivers/media/video/Makefile | 1 + drivers/media/video/mx2_camera.c | 1513 ++++ drivers/misc/Kconfig | 10 + drivers/misc/Makefile | 1 + drivers/misc/arm-charlcd.c | 396 + drivers/mmc/host/mmci.c | 148 +- drivers/mmc/host/mmci.h | 39 +- drivers/mmc/host/mxcmmc.c | 48 +- drivers/mtd/nand/mxc_nand.c | 33 +- drivers/mtd/nand/omap2.c | 220 +- drivers/net/phy/marvell.c | 38 +- drivers/rtc/rtc-pl031.c | 2 +- drivers/serial/amba-pl010.c | 2 +- drivers/serial/amba-pl011.c | 90 +- drivers/usb/gadget/at91_udc.c | 205 +- drivers/usb/gadget/at91_udc.h | 3 + drivers/usb/gadget/fsl_mxc_udc.c | 2 +- drivers/usb/host/ehci-mxc.c | 2 +- drivers/video/console/Kconfig | 2 +- drivers/video/imxfb.c | 72 +- drivers/video/omap/lcd_apollon.c | 3 - drivers/video/omap2/vram.c | 33 +- include/linux/amba/bus.h | 11 + include/linux/amba/mmci.h | 10 +- include/linux/amba/serial.h | 3 + include/linux/marvell_phy.h | 20 + include/linux/omapfb.h | 2 +- lib/Kconfig.debug | 7 + lib/atomic64_test.c | 2 +- lib/scatterlist.c | 23 +- mm/kmemleak.c | 98 +- scripts/kconfig/expr.h | 2 + scripts/kconfig/menu.c | 5 + scripts/kconfig/symbol.c | 18 + tools/perf/arch/arm/Makefile | 4 + tools/perf/arch/arm/util/dwarf-regs.c | 64 + tools/perf/builtin-buildid-list.c | 4 +- tools/perf/builtin-diff.c | 2 - tools/perf/builtin-report.c | 2 - tools/perf/util/event.c | 10 +- tools/perf/util/map.c | 22 +- tools/perf/util/map.h | 2 +- tools/perf/util/session.c | 22 +- tools/perf/util/symbol.c | 366 +- tools/perf/util/symbol.h | 1 - 728 files changed, 60744 insertions(+), 13786 deletions(-) create mode 100644 Documentation/arm/swp_emulation delete mode 100644 arch/arm/boot/compressed/Makefile.debug delete mode 100644 arch/arm/boot/compressed/head-l7200.S delete mode 100644 arch/arm/configs/am3517_evm_defconfig delete mode 100644 arch/arm/configs/cm_t35_defconfig delete mode 100644 arch/arm/configs/devkit8000_defconfig delete mode 100644 arch/arm/configs/igep0020_defconfig delete mode 100644 arch/arm/configs/lusl7200_defconfig delete mode 100644 arch/arm/configs/omap3_beagle_defconfig delete mode 100644 arch/arm/configs/omap3_evm_defconfig delete mode 100644 arch/arm/configs/omap3_pandora_defconfig delete mode 100644 arch/arm/configs/omap3_stalker_lks_defconfig delete mode 100644 arch/arm/configs/omap3_touchbook_defconfig delete mode 100644 arch/arm/configs/omap_2430sdp_defconfig delete mode 100644 arch/arm/configs/omap_3430sdp_defconfig delete mode 100644 arch/arm/configs/omap_3630sdp_defconfig delete mode 100644 arch/arm/configs/omap_apollon_2420_defconfig delete mode 100644 arch/arm/configs/omap_h4_2420_defconfig delete mode 100644 arch/arm/configs/omap_ldp_defconfig delete mode 100644 arch/arm/configs/omap_zoom2_defconfig delete mode 100644 arch/arm/configs/omap_zoom3_defconfig delete mode 100644 arch/arm/configs/overo_defconfig delete mode 100644 arch/arm/configs/rx51_defconfig create mode 100644 arch/arm/include/asm/memblock.h delete mode 100644 arch/arm/include/asm/mmzone.h create mode 100644 arch/arm/include/asm/tls.h create mode 100644 arch/arm/kernel/crash_dump.c create mode 100644 arch/arm/kernel/swp_emulate.c create mode 100644 arch/arm/mach-at91/board-snapper9260.c create mode 100644 arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h create mode 100644 arch/arm/mach-cns3xxx/devices.c create mode 100644 arch/arm/mach-cns3xxx/devices.h create mode 100644 arch/arm/mach-cns3xxx/pcie.c create mode 100644 arch/arm/mach-imx/Kconfig rename arch/arm/{mach-mx2 => mach-imx}/Makefile (55%) rename arch/arm/{mach-mx2 => mach-imx}/Makefile.boot (67%) rename arch/arm/{mach-mx1/clock.c => mach-imx/clock-imx1.c} (90%) rename arch/arm/{mach-mx2/clock_imx21.c => mach-imx/clock-imx21.c} (100%) rename arch/arm/{mach-mx2/clock_imx27.c => mach-imx/clock-imx27.c} (99%) rename arch/arm/{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} (100%) create mode 100644 arch/arm/mach-imx/devices-imx1.h create mode 100644 arch/arm/mach-imx/devices-imx21.h create mode 100644 arch/arm/mach-imx/devices-imx27.h rename arch/arm/{mach-mx2 => mach-imx}/devices.c (67%) rename arch/arm/{mach-mx2 => mach-imx}/devices.h (54%) rename arch/arm/{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} (99%) create mode 100644 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c create mode 100644 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h rename arch/arm/{plat-mxc/include/mach/dma-mx1-mx2.h => mach-imx/include/mach/dma-v1.h} (93%) rename arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c (66%) rename arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c (86%) rename arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c (81%) rename arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c (77%) rename arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c (74%) rename arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c (82%) rename arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c (86%) rename arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c (80%) rename arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c (91%) rename arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c (89%) rename arch/arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} (68%) rename arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c (95%) rename arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c (95%) rename arch/arm/{mach-mx1/ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} (100%) rename arch/arm/{mach-mx1/mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} (100%) rename arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c (100%) create mode 100644 arch/arm/mach-imx/pm-imx27.c create mode 100644 arch/arm/mach-integrator/common.h create mode 100644 arch/arm/mach-kirkwood/include/mach/leds-ns2.h create mode 100644 arch/arm/mach-kirkwood/t5325-setup.c delete mode 100644 arch/arm/mach-l7200/Makefile delete mode 100644 arch/arm/mach-l7200/Makefile.boot delete mode 100644 arch/arm/mach-l7200/core.c delete mode 100644 arch/arm/mach-l7200/include/mach/aux_reg.h delete mode 100644 arch/arm/mach-l7200/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-l7200/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-l7200/include/mach/gp_timers.h delete mode 100644 arch/arm/mach-l7200/include/mach/gpio.h delete mode 100644 arch/arm/mach-l7200/include/mach/hardware.h delete mode 100644 arch/arm/mach-l7200/include/mach/io.h delete mode 100644 arch/arm/mach-l7200/include/mach/irqs.h delete mode 100644 arch/arm/mach-l7200/include/mach/memory.h delete mode 100644 arch/arm/mach-l7200/include/mach/pmpcon.h delete mode 100644 arch/arm/mach-l7200/include/mach/pmu.h delete mode 100644 arch/arm/mach-l7200/include/mach/serial.h delete mode 100644 arch/arm/mach-l7200/include/mach/serial_l7200.h delete mode 100644 arch/arm/mach-l7200/include/mach/sib.h delete mode 100644 arch/arm/mach-l7200/include/mach/sys-clock.h delete mode 100644 arch/arm/mach-l7200/include/mach/system.h delete mode 100644 arch/arm/mach-l7200/include/mach/time.h delete mode 100644 arch/arm/mach-l7200/include/mach/timex.h delete mode 100644 arch/arm/mach-l7200/include/mach/uncompress.h delete mode 100644 arch/arm/mach-l7200/include/mach/vmalloc.h create mode 100644 arch/arm/mach-lpc32xx/Kconfig create mode 100644 arch/arm/mach-lpc32xx/Makefile create mode 100644 arch/arm/mach-lpc32xx/Makefile.boot create mode 100644 arch/arm/mach-lpc32xx/clock.c create mode 100644 arch/arm/mach-lpc32xx/clock.h create mode 100644 arch/arm/mach-lpc32xx/common.c create mode 100644 arch/arm/mach-lpc32xx/common.h create mode 100644 arch/arm/mach-lpc32xx/gpiolib.c copy arch/arm/{plat-mxc/include/mach/board-pcm037.h => mach-lpc32xx/include/mach/clkdev.h} (57%) rename arch/arm/{plat-mxc/include/mach/board-mx35pdk.h => mach-lpc32xx/include/mach/debug-macro.S} (55%) create mode 100644 arch/arm/mach-lpc32xx/include/mach/entry-macro.S create mode 100644 arch/arm/mach-lpc32xx/include/mach/gpio.h create mode 100644 arch/arm/mach-lpc32xx/include/mach/hardware.h create mode 100644 arch/arm/mach-lpc32xx/include/mach/i2c.h copy arch/arm/{plat-mxc/include/mach/board-pcm043.h => mach-lpc32xx/include/mach/io.h} (57%) create mode 100644 arch/arm/mach-lpc32xx/include/mach/irqs.h rename arch/arm/{plat-mxc/include/mach/board-pcm043.h => mach-lpc32xx/include/mach/memory.h} (57%) create mode 100644 arch/arm/mach-lpc32xx/include/mach/platform.h create mode 100644 arch/arm/mach-lpc32xx/include/mach/system.h copy arch/arm/{plat-mxc/include/mach/board-pcm037.h => mach-lpc32xx/include/mach/timex.h} (57%) create mode 100644 arch/arm/mach-lpc32xx/include/mach/uncompress.h rename arch/arm/{plat-mxc/include/mach/board-pcm037.h => mach-lpc32xx/include/mach/vmalloc.h} (57%) create mode 100644 arch/arm/mach-lpc32xx/irq.c create mode 100644 arch/arm/mach-lpc32xx/phy3250.c create mode 100644 arch/arm/mach-lpc32xx/pm.c create mode 100644 arch/arm/mach-lpc32xx/serial.c create mode 100644 arch/arm/mach-lpc32xx/suspend.S create mode 100644 arch/arm/mach-lpc32xx/timer.c create mode 100644 arch/arm/mach-msm/board-trout-gpio.c delete mode 100644 arch/arm/mach-mx1/Kconfig delete mode 100644 arch/arm/mach-mx1/Makefile delete mode 100644 arch/arm/mach-mx1/Makefile.boot delete mode 100644 arch/arm/mach-mx1/crm_regs.h delete mode 100644 arch/arm/mach-mx1/devices.c delete mode 100644 arch/arm/mach-mx1/devices.h delete mode 100644 arch/arm/mach-mx2/Kconfig delete mode 100644 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c delete mode 100644 arch/arm/mach-mx2/serial.c create mode 100644 arch/arm/mach-mx25/devices-imx25.h create mode 100644 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c create mode 100644 arch/arm/mach-mx25/mach-cpuimx25.c rename arch/arm/mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} (76%) create mode 100644 arch/arm/mach-mx3/devices-imx31.h create mode 100644 arch/arm/mach-mx3/devices-imx35.h create mode 100644 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c create mode 100644 arch/arm/mach-mx3/mach-cpuimx35.c rename arch/arm/mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} (89%) create mode 100644 arch/arm/mach-mx5/board-cpuimx51.c create mode 100644 arch/arm/mach-mx5/board-mx51_3ds.c create mode 100644 arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c create mode 100644 arch/arm/mach-omap1/usb.c rename arch/arm/mach-omap2/{board-sdp-flash.c => board-flash.c} (66%) create mode 100644 arch/arm/mach-omap2/board-omap4panda.c rename arch/arm/mach-omap2/include/mach/{board-sdp.h => board-flash.h} (71%) create mode 100644 arch/arm/mach-omap2/include/mach/id.h create mode 100644 arch/arm/mach-omap2/mux2420.c create mode 100644 arch/arm/mach-omap2/mux2420.h create mode 100644 arch/arm/mach-omap2/mux2430.c create mode 100644 arch/arm/mach-omap2/mux2430.h create mode 100644 arch/arm/mach-omap2/omap-hotplug.c create mode 100644 arch/arm/mach-omap2/pm.c create mode 100644 arch/arm/mach-omap2/pm44xx.c create mode 100644 arch/arm/mach-omap2/usb-fs.c create mode 100644 arch/arm/mach-ux500/include/mach/irqs-board-mop500.h create mode 100644 arch/arm/mach-ux500/include/mach/irqs-db5500.h create mode 100644 arch/arm/mach-ux500/include/mach/irqs-db8500.h create mode 100644 arch/arm/mach-ux500/pins-db8500.h create mode 100644 arch/arm/mach-w90x900/include/mach/regs-gcr.h delete mode 100644 arch/arm/mm/discontig.c create mode 100644 arch/arm/plat-mxc/3ds_debugboard.c create mode 100644 arch/arm/plat-mxc/devices/Kconfig create mode 100644 arch/arm/plat-mxc/devices/Makefile create mode 100644 arch/arm/plat-mxc/devices/platform-flexcan.c create mode 100644 arch/arm/plat-mxc/devices/platform-imx-i2c.c create mode 100644 arch/arm/plat-mxc/devices/platform-imx-uart.c create mode 100644 arch/arm/plat-mxc/devices/platform-mxc_nand.c create mode 100644 arch/arm/plat-mxc/devices/platform-spi_imx.c create mode 100644 arch/arm/plat-mxc/include/mach/3ds_debugboard.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-armadillo5x0.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-kzmarm11.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx21ads.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27ads.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27lite.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27pdk.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31_3ds.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h delete mode 100644 arch/arm/plat-mxc/include/mach/board-qong.h create mode 100644 arch/arm/plat-mxc/include/mach/devices-common.h rename arch/arm/plat-mxc/include/mach/{board-eukrea_cpuimx27.h => eukrea-baseboards.h} (64%) create mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h create mode 100644 arch/arm/plat-nomadik/include/plat/pincfg.h delete mode 100644 arch/arm/plat-omap/include/plat/dsp_common.h create mode 100644 arch/arm/plat-versatile/leds.c create mode 100644 debian.linaro/NOTES create mode 100644 debian.linaro/abi/2.6.35-1003.7/abiname create mode 100644 debian.linaro/abi/2.6.35-1003.7/armel/linaro-mx51 create mode 100644 debian.linaro/abi/2.6.35-1003.7/armel/linaro-mx51.modules create mode 100644 debian.linaro/abi/2.6.35-1003.7/armel/linaro-omap create mode 100644 debian.linaro/abi/2.6.35-1003.7/armel/linaro-omap.modules create mode 100644 debian.linaro/abi/2.6.35-1003.7/armel/linaro-vexpress create mode 100644 debian.linaro/abi/2.6.35-1003.7/armel/linaro-vexpress.modules create mode 100644 debian.linaro/abi/perm-blacklist create mode 100644 debian.linaro/changelog create mode 100644 debian.linaro/changelog.historical create mode 100644 debian.linaro/config/armel/config.common.armel create mode 100644 debian.linaro/config/armel/config.flavour.linaro-mx51 create mode 100644 debian.linaro/config/armel/config.flavour.linaro-omap create mode 100644 debian.linaro/config/armel/config.flavour.linaro-vexpress create mode 100644 debian.linaro/config/config.common.ports create mode 100644 debian.linaro/config/config.common.ubuntu create mode 100644 debian.linaro/config/enforce create mode 100644 debian.linaro/control.d/flavour-control.stub create mode 100644 debian.linaro/control.d/vars.linaro-mx51 create mode 100644 debian.linaro/control.d/vars.linaro-omap create mode 100644 debian.linaro/control.d/vars.linaro-vexpress create mode 100644 debian.linaro/control.stub.in create mode 100644 debian.linaro/copyright create mode 100644 debian.linaro/d-i/firmware/README.txt create mode 100644 debian.linaro/d-i/kernel-versions.in create mode 100644 debian.linaro/d-i/modules/block-modules create mode 100644 debian.linaro/d-i/modules/crypto-modules create mode 100644 debian.linaro/d-i/modules/fat-modules create mode 100644 debian.linaro/d-i/modules/fs-core-modules create mode 100644 debian.linaro/d-i/modules/fs-secondary-modules create mode 100644 debian.linaro/d-i/modules/input-modules create mode 100644 debian.linaro/d-i/modules/irda-modules create mode 100644 debian.linaro/d-i/modules/md-modules create mode 100644 debian.linaro/d-i/modules/mouse-modules create mode 100644 debian.linaro/d-i/modules/nfs-modules create mode 100644 debian.linaro/d-i/modules/nic-modules create mode 100644 debian.linaro/d-i/modules/nic-shared-modules create mode 100644 debian.linaro/d-i/modules/nic-usb-modules create mode 100644 debian.linaro/d-i/modules/parport-modules create mode 100644 debian.linaro/d-i/modules/plip-modules create mode 100644 debian.linaro/d-i/modules/ppp-modules create mode 100644 debian.linaro/d-i/modules/sata-modules create mode 100644 debian.linaro/d-i/modules/scsi-modules create mode 100644 debian.linaro/d-i/modules/squashfs-modules create mode 100644 debian.linaro/d-i/modules/storage-core-modules create mode 100644 debian.linaro/d-i/modules/usb-modules create mode 100644 debian.linaro/d-i/modules/vlan-modules create mode 100644 debian.linaro/d-i/package-list create mode 100644 debian.linaro/etc/getabis create mode 100644 debian.linaro/etc/kernelconfig create mode 100644 debian.linaro/rules.d/armel.mk create mode 100644 drivers/leds/leds-ns2.c create mode 100644 drivers/media/video/mx2_camera.c create mode 100644 drivers/misc/arm-charlcd.c create mode 100644 include/linux/marvell_phy.h create mode 100644 tools/perf/arch/arm/Makefile create mode 100644 tools/perf/arch/arm/util/dwarf-regs.c

14 years, 10 months

IGEPv2 kernel changes

by Michael Hope

Hi there. I got two new IGEPv2 boards over the weekend. They're now happily running linux-linaro 2.6.35-1001.5. I made the following changes: * Statically link USB mass storage support so that I can use my USB HDD as a rootfs * Statically link in SMSC911x/921x support for future use as a NFS root * Turn off CONFIG_FIXED_PHY to prevent a sysfs conflict with the network card driver * Strip back the kernel features to fit within the default 3 MB NAND partition The NAND partitions are a bit messy. I know we want to be compatible, but the small kernel partition and lack of a initrd partition are messy. -- Michael

14 years, 10 months

Fwd: Linaro Infrastructure Team Weekly Report (2010-08-19 to 2010-08-25)

by Ian Smith

Sorry - previous mail had an incorrect link. The weekly report for the Linaro Infrastructure team may be found at: Status report:https://wiki.linaro.org/Platform/Infrastructure/Status/2010-08-26 Burndown chart:http://people.canonical.com/~pitti/workitems/maverick/arm-infrastruct… Progress: * Finished up packaging branch for Abrek * Started a branch to remove abrek list-results and replace it with a 'results' command with various subcommands to operate on locally stored results. Mostly complete, but a bit of cleanup to do still * Got Ara to create an isotracker instance for us to use, and qatracker.linaro.org now points to it * Wrote up a set of tests to post on qatracker for the headless image, sent to asac for review * arm-m-derived-archive-rebuild: Made some progress on writing the SQL queries to delete certain things. * hardware-packs: improved the spec and asked questions about parts that were under-specified. * other: reviewed lots of branches, wrote a blog post, debugging and fixing bzr-builddeb and bzr-builder issues that were blocking colleagues, debugged a test issue. * (arm-m-image-building-console) * "Check dependencies for licensing concerns": DONE * "Check if we're carrying patches to dependencies": DONE * "Implement dependency management": Continued buildout spike, also implemented a spike using virtualenv. * "Resolve timezone patch to django issue": Made a branch to do this with a monkey patch instead of textual patch. * (arm-m-private-archive-hosting-infrastructure) * "Choose which views we must provide for the basic services": DONE * arm-m-private-archive-hosting-infrastructure * Change to accept binary uploads: got it through review and just need the reviewer to check some incremental changes before I land it. * Custom Image/Icing folders that extend Launchpad's ones with the vostok-specific resources: postponed as we have no use for it yet Please let me know if you have any questions. Kind Regards, Ian

14 years, 10 months

Linaro Infrastructure Team Weekly Report (2010-08-19 to 2010-08-25)

by Ian Smith

The weekly report for the Linaro Infrastructure team may be found at: Status report:https://wiki.linaro.org/Platform/Infrastructure/Status/2010-08-12 Burndown chart:http://people.canonical.com/~pitti/workitems/maverick/arm-infrastruct… Progress: * Finished up packaging branch for Abrek * Started a branch to remove abrek list-results and replace it with a 'results' command with various subcommands to operate on locally stored results. Mostly complete, but a bit of cleanup to do still * Got Ara to create an isotracker instance for us to use, and qatracker.linaro.org now points to it * Wrote up a set of tests to post on qatracker for the headless image, sent to asac for review * arm-m-derived-archive-rebuild: Made some progress on writing the SQL queries to delete certain things. * hardware-packs: improved the spec and asked questions about parts that were under-specified. * other: reviewed lots of branches, wrote a blog post, debugging and fixing bzr-builddeb and bzr-builder issues that were blocking colleagues, debugged a test issue. * (arm-m-image-building-console) * "Check dependencies for licensing concerns": DONE * "Check if we're carrying patches to dependencies": DONE * "Implement dependency management": Continued buildout spike, also implemented a spike using virtualenv. * "Resolve timezone patch to django issue": Made a branch to do this with a monkey patch instead of textual patch. * (arm-m-private-archive-hosting-infrastructure) * "Choose which views we must provide for the basic services": DONE * arm-m-private-archive-hosting-infrastructure * Change to accept binary uploads: got it through review and just need the reviewer to check some incremental changes before I land it. * Custom Image/Icing folders that extend Launchpad's ones with the vostok-specific resources: postponed as we have no use for it yet Please let me know if you have any questions. Kind Regards, Ian

14 years, 10 months

← Newer
1
2
3
4
5
6
7
8
9
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-dev August 2010