It took about 3 tries to launch it.
I'm seeing:
W/dalvikvm( 2023): threadid=17: thread exiting with uncaught exception
(group=0x40f02300)
E/AndroidRuntime( 2023): FATAL EXCEPTION: Thread-79
E/AndroidRuntime( 2023): java.lang.IllegalArgumentException: Make sure
the SurfaceView or associated SurfaceHolder has a valid Surface
E/AndroidRuntime( 2023): at
com.google.android.gles_jni.EGLImpl._eglCreateWindowSurface(Native
Method)
E/AndroidRuntime( 2023): at
com.google.android.gles_jni.EGLImpl.eglCreateWindowSurface(EGLImpl.java:90)
E/AndroidRuntime( 2023): at
org.zeroxlab.kubench.GLSurfaceView$GLThread.run(GLSurfaceView.java:159)
Anyone seen this?
--
Zach Pfeffer
Android Platform Team Lead, Linaro Platform Teams
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linarohttp://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
On 3 September 2012 05:41, Botao Sun <botao.sun(a)linaro.org> wrote:
> + Zach
>
> Sorry, I mean another Amit, Mr. Amit Pundir, he's working on Samsung related
> stuff I remembered.
>
> Also, here is more information, I have tried several previous image, the
> last good one is build 47:
>
> https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sam…
>
> Therefore, I'm going to use this one as our weekly test target. However,
> please dig more on why build 48, 49 & 50 failed - bad thing started at build
> 48.
>
> Thank you!
Botao,
Just had a second to look at this, I see:
U-Boot 2012.07-00053-gbf30cf4 (Sep 03 2012 - 07:03:03) for ORIGEN
CPU: Exynos4210@1000MHz
Board: ORIGEN
DRAM: 1 GiB
WARNING: Caches not enabled
MMC: SAMSUNG SDHCI: 0
Timeout for status update!
mmc fail to send stop cmd
Using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr
397 bytes read
Running bootscript from mmc0:2 ...
## Executing script at 42000000
reading uImage
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Timeout for status update!
mmc fail to send stop cmd
Transfer data timeout
Error reading cluster
** Unable to read "uImage" from mmc 0:2 **
** Can't read partition table on 0:0 **
** Partition 2 not valid on device 0 **
** Unable to use mmc 0:2 for fatload **
## Booting kernel from Legacy Image at 40007000 ...
Image Name: Linux-3.4.8
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3879160 Bytes = 3.7 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
ORIGEN #
on,
https://android-build.linaro.org/builds/~linaro-android/origen-jb-gcc47-sam…
This would explain why it works in LAVA (since LAVA doesn't update the
bootloader) but it doesn't work locally (since we do update the
bootloader). Is this what you see?
>
>
> BR
> Botao Sun
>
> On Mon, Sep 3, 2012 at 8:25 PM, amit khare <amit.khare(a)linaro.org> wrote:
>>
>> on it....
>>
>> Regards,
>> Amit
>>
>>
>> On 3 September 2012 15:21, Botao Sun <botao.sun(a)linaro.org> wrote:
>>>
>>> Hi Amit,
>>>
>>> Would you take a look at this issue?
>>>
>>> Origen Jelly Bean boot failed.:
>>> https://bugs.launchpad.net/linaro-android/+bug/1045244
>>>
>>> The weird thing is LAVA shows that it works well:
>>> http://validation.linaro.org/lava-server/dashboard/image-reports/origen-jb-…
>>>
>>> Is there anything I missed during SD card flashing?
>>>
>>> Thank you!
>>>
>>>
>>> BR
>>> Botao Sun
>>
>>
>
--
Zach Pfeffer
Android Platform Team Lead, Linaro Platform Teams
Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linarohttp://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
Dear,
I can not get imgtec-panda-imm76i-67545da7.tgz from “https://dl.google.com” when I install the graphics library.
The command is “wget --no-check-certificate https://dl.google.com/dl/android/aosp/imgtec-panda-imm76i-67545da7.tgz”. But the connection is always failed.
Can I get the graphics library “imgtec-panda-imm76i-67545da7.tgz” from another address?
Thanks & Best Regards!
牟刚
Actions Semiconductor Co.,Ltd
Tel: +86-756-3392353 ext.3103 Fax: +86-756-3392251
Email: mugang(a)actions-semi.com HTTP://www.actions-semi.com
Hey everyone.
I thought I would re-advertise my local build makefile/scripts.
If you want to build things locally, tweak, hack or work on a specific
component then please don't reinvent the wheel (like I did) but have a
look at this first:
https://github.com/zyga/android-build-scripts
There are simple super-useful targets. You can easily keep multiple
build trees. It supports strange stuff like doing emmc images and using
riff to flash them to snowball. It can flash sd cards automatically and
more:
Here's a short example on what it can do:
git clone git://github.com/zyga/android-build-scripts.git
cd android-build-scripts
make CONFIGURATION=panda-ics-gcc47-tilt-tracking-blob sync
make CONFIGURATION=panda-ics-gcc47-tilt-tracking-blob all -j 8
make CONFIGURATION=panda-ics-gcc47-tilt-tracking-blob flash
There are multiple configurations available (roughly what there is on
android-build.linaro.org). They are _manually_ maintained but once our
vanilla build configs move to git this step can go away.
NOTE: there is also support for applying vendor overlays but it is _NOT_
enabled by default (it should be, it's a small oversight that I'll fix
in a moment). The code is rather clean and very short (and documented)
so feel free to post patches or pull requests if you find something that
does not work.
Best regards
ZK
--
Zygmunt Krynicki
s/Linaro Validation Team/Canonical Certification Team/
s/Validation/Android/
I am trying to enable modem on ANDROID ICS 4.o.3
I am able to get PPP interface in netcfg with IP
If I launch the ping www.google.com from terminal I am able to get
continuous resoponse
but if I launch the browser the ping is giving the error
ping: sendmsg: No buffer space available
and browser also not loading more than one page for the second page it is
keep on loading
and at the end it is saying a network has occurred
ping: sendmsg: No buffer space available
and some times browser is trying for long time and it is giving a pop-up
window saying A network error occured
In ppp_async.c OBUFFSIZE is 4096 I tried with 10240 also but it didn't
worked
and I tried echo 83886080 > /proc/sys/net/core/wmem_max then also same
problem
the tcp buffer sizes in init.rc are
setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,
110208
setprop net.tcp.buffersize.wifi
524288,1048576,2097152,262144,524288,1048576
setprop net.tcp.buffersize.lte
524288,1048576,2097152,262144,524288,1048576
setprop net.tcp.buffersize.umts 4094,87380,110208,4096,16384,110208
setprop net.tcp.buffersize.hspa 4094,87380,262144,4096,16384,262144
setprop net.tcp.buffersize.edge 4093,26280,35040,4096,16384,35040
setprop net.tcp.buffersize.gprs 4092,8760,11680,4096,8760,11680
* My board is having 512MB RAM is it ok for ICS or it can be cause for this
problem
Did anybody faced this problem any suggestions to debug this
Thanks & Regards
O S L Reddy
last night I try to get linaro andriod source for my panda board, I
encount fetch error.
use tracking-panda.xml can't fetch “kernel/panda”project，the revision is
not correct，
“GitError: kernel/panda update-ref: fatal:
1010fcd033e01ead0d43d61d30b341b0d4c68d49^0: not a valid SHA1
the repo commands I used:
$ repo init -u git://android.git.linaro.org/platform/manifest.git -b
linaro-android-12.07-release -m tracking-panda.xml
$ repo sync
sunny.
Hello there, how are you today?
My name is Sandro Palma and I am very interested to install Linaro on my devices. I will start with the lasiest one (a Chinese table) the brand is Genesis, made by SK Mtek. Model GT-8230.
Let me know if need additional info.
Please I would really appreciate a support to identify which file I install.
Many thanks in advance,
Regards,
Sandro Palma
Project Especialist
Note:
https://wiki.linaro.org/Platform/Android/ReadAndroidBuildNames
[cid:image002.jpg@01CD48A4.30FEE520]
________________________________
Esta mensagem, incluindo seus anexos, tem car?ter confidencial e seu conte?do ? restrito ao destinat?rio da mensagem. Caso voc? tenha recebido esta mensagem por engano, queira por favor retorn?-la ao destinat?rio e apag?-la de seus arquivos. Qualquer uso n?o autorizado, replica??o ou dissemina??o desta mensagem ou parte dela ? expressamente proibido. A Yp? n?o ? respons?vel pelo conte?do ou a veracidade desta informa??o
Confidentiality Notice: The information contained in this email message, including any attachment, is confidential and is intended only for the person or entity to which it is addressed. If you are neither the intended recipient nor the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that you may not review, retransmit, convert to hard copy, copy, use or distribute this email message or any attachments to it. If you have received this email in error, please contact the sender immediately and delete this message from any computer or other data bank. Thank you.
Hi,
When trying to checkout the kernel used for Linaro 12.07 on Pandaboard for
Android, the required kernel revision does no longer exist in the remote
git repository (it was there up till about ~2 weeks ago).
Here is what I'm doing, based on the instructions in the Linaro 12.07 build
for Android/Pandaboard<https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47-til…>page:
1. Checkout branch *linaro-android-12.07-release* from *git://
android.git.linaro.org/platform/manifest.git*
2. Clone kernel from its location as stated in* tracking-panda.xml*:
*git clone git://android.git.linaro.org/kernel/panda kernel*
3. Checkout kernel revision stated in *tracking-panda.xml*:
*git checkout -b my_branch 1010fcd033e01ead0d43d61d30b341b0d4c68d49*
I get error:
*fatal: reference is not a tree: 1010fcd033e01ead0d43d61d30b341b0d4c68d49*
Clearly, repo sync fails as well.
What change needs to be done to the tracking-panda.xml manifest / kernel
revision to checkout a correct revision?
